Gateway E-100 User manual


Add to my manuals
14 Pages

advertisement

Gateway E-100 User manual | Manualzz
USER GUIDE
Gateway Disc Drive
Using the External Disc Drive
• Identifying features
• Connecting the drive
• Using the drive
• Inserting a CD or DVD
• Installing the software
1
Using the External Disc Drive
Identifying features
Front
Eject button Manual eject hole
Component
Description
Eject button
Press to open the disc tray.
Manual eject
hole
If the disc tray will not open by
pressing the eject button,
manually eject the disc by
inserting an opened paper clip
into the manual eject hole.
Right
Power connector
2
Component
Description
Power
connector
Plug the optional AC adapter cable
into this connector.
Connecting the drive
Back
USB port
Component
Description
USB port
Connect the USB cable to this port.
Connecting the drive
To connect the drive:
1 Connect the optional AC adapter to the
drive’s power connector, then connect the
other end to an AC outlet.
3
Using the External Disc Drive
2 Connect the USB cable to the drive.
3 Connect the USB cable to an available USB
jack on the notebook.
The first time you connect the drive to your
notebook, Windows XP installs the
appropriate drivers.
Using the drive
You can use your drive to install programs, play
audio CDs, play DVDs, access data, record music
and data to CD-R or CD-RW discs, and record
video and data to DVD-R, DVD+R, DVD-RW,
DVD+RW, double-layer DVD+R, or DVD-RAM
discs.
To use the double-layer capability of the
double-layer recordable DVD drive, the blank
DVDs you purchase must state Double-Layer,
Dual Layer, or DL. Using other types of blank
media will result in less capacity.
4
Inserting a CD or DVD
Inserting a CD or DVD
To insert a CD or DVD:
1 Press the eject button on the CD or DVD
Important
When you place a
single-sided disc in the
tray, make sure that
the label side is facing
up. If the disc has two
playable sides, place
the disc so the name of
the side you want to
play is facing up.
drive. After the tray opens slightly, pull the
disc tray completely open.
2 Place the disc in the tray with the label
facing up, then press down carefully on the
disc until it snaps into place.
3 Push the tray in until it is closed.
Installing the software
You may have received installation discs for DVD
viewing and disc creation programs. If your
notebook does not already include these
programs, you can install them from these discs.
To install the software:
■
Insert the program disc into the disc drive.
The program should automatically install.
5
Using the External Disc Drive
Important safety information
Warning
Always follow these
instructions to help
guard against
personal injury and
damage to your
Gateway disc drive.
Your Gateway disc drive is designed and tested to meet the latest standards for
safety of information technology equipment. However, to ensure safe use of this
disc drive, it is important that the safety instructions marked on the disc drive and
in the documentation are followed.
Setting up your disc drive
■
■
■
■
■
Read and follow all instructions marked on the disc drive and in the
documentation before you operate your disc drive. Retain all safety and
operating instructions for future use.
Do not use this disc drive near water or a heat source such as a radiator.
Set up the disc drive on a stable work surface.
The disc drive should be operated only from the type of power source indicated
on the rating label.
If you use an extension cord with this disc drive, make sure that the total
ampere rating on the products plugged into the extension cord does not
exceed the extension cord ampere rating.
Care during use
■
■
■
Do not walk on the power cord or allow anything to rest on it.
Do not spill anything on the disc drive. The best way to avoid spills is to avoid
eating and drinking near your disc drive.
Unplug the disc drive from the wall outlet and refer servicing to qualified
personnel if:
■
The power cord or plug is damaged.
■
Liquid has been spilled into the disc drive.
■ The disc drive does not operate properly when the operating instructions
are followed.
■ The disc drive was dropped or the cabinet is damaged.
■
The disc drive performance changes.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
6
Important safety information
Regulatory compliance statements
United States of America
Caution
Changes or
modifications not
expressly approved by
Gateway could void
the FCC compliance
and negate your
authority to operate
the disc drive.
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio and television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
■ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
■ Consult the dealer or an experienced radio/TV technician for help.
Compliance Accessories: The accessories associated with this disc drive are: AC
adapter and USB cable. These accessories are required to be used in order to
ensure compliance with FCC rules.
■
Canada
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations of Industry
Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Canada Radio Frequency Interference
Requirements
This Class B digital apparatus complies with Canadian ICES-003, Issue 2, and
RSS-210, Issue 4 (Dec. 2000).
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 2, et
CNR-210, No. 4 (Dec. 2000).
7
Using the External Disc Drive
Pour empêcher que cet appareil cause du brouillage au service faisant l'objet
d'une licence, il doit être utilizé à l'intérieur et devrait être placé loin des fenêtres
afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne
d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.
European Union Notice
Products with the CE Marking comply with the EMC Directive (89/336/EEC) and
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community and if this product has telecommunication functionality, the R&TTE
Directive (1999/5/EC).
Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards and
regulations):
■
EN55022 (CISPR 22) Electromagnetic Interference
EN55024 (IEC61000-4-2,3,4,5,6,8,11) Electromagnetic Immunity
■ EN61000-3-2 (IEC61000-3-2)-Power Line Harmonics
■
EN61000-3-3 (IEC61000-3-3)-Power Line Flicker
■
EN60950 (IEC60950) Product Safety
CE Caution: Due to the fact that the frequencies used by 802.11b wireless LAN
devices may not yet be harmonized in all countries, 802.11b products are
designed for use only in specific countries or regions, and are not allowed to be
operated in countries or regions other than those of designated use. As a user of
these products, you are responsible for ensuring that the products are used only
in the countries or regions for which they were intended and for verifying that
they are configured with the correct selection of frequency and channel for the
country or region of use. And deviation from permissible settings and restrictions
in the country or region of use could be an infringement of local law and may be
punished as such.
■
Japanese Notice
8
Important safety information
Environmental information
The product you have purchased contains extracted natural resources that have
been used in the manufacturing process. This product may contain substances
known to be hazardous to the environment or to human health.
To prevent releases of harmful substances into the environment and to maximize
the use of our natural resources, Gateway provides the following information on
how you can responsibly recycle or reuse most of the materials in your “end of
life” product.
Waste Electrical and Electronic Equipment (commonly known a
WEEE) should never be disposed of in the municipal waste stream
(residential garbage collection). The “Crossed-Out Waste Bin” label
affixed to this product is your reminder to dispose of your “end of
life” product properly.
Substances such as glass, plastics, and certain chemical compounds are highly
recoverable, recyclable, and reusable. You can do your part for the environment
by following these simple steps:
■
When your electrical or electronic equipment is no longer useful to you, “take
it back” to your local or regional waste collection administration for recycling.
■
In some cases, your “end of life” product may be “traded in” for credit towards
the purchase of new Gateway equipment. Call Gateway to see if this program is
available in your area.
■ If you need further assistance in recycling, reusing, or trading in your “end of
life” product, you may contact us at the Customer Care number listed in your
product’s user guide and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by
understanding and using the energy-saving features of this product (where
applicable), recycling the inner and outer packaging (including shipping
containers) this product was delivered in, and by disposing of or recycling used
batteries properly.
With your help, we can reduce the amount of natural resources needed to produce
electrical and electronic equipment, minimize the use of landfills for the disposal
of “end of life” products, and generally improve our quality of life by ensuring that
potentially hazardous substances are not released into the environment and are
disposed of properly.
9
Using the External Disc Drive
Notices
Copyright © 2006 Gateway, Inc.
All Rights Reserved
7565 Irvine Center Drive
Irvine, CA 92618 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it
may be reproduced or transmitted by any means or in any form, without prior
consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be
accurate. However, changes are made periodically. These changes are
incorporated in newer publication editions. Gateway may improve and/or change
products described in this publication at any time. Due to continuing system
improvements, Gateway is not responsible for inaccurate information which may
appear in this manual. For the latest product updates, consult the Gateway Web
site at www.gateway.com. In no event will Gateway be liable for direct, indirect,
special, exemplary, incidental, or consequential damages resulting from any
defect or omission in this manual, even if advised of the possibility of such
damages.
In the interest of continued product development, Gateway reserves the right to
make improvements in this manual and the products it describes at any time,
without notices or obligation.
Trademark Acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered
trademarks of Gateway, Inc. in the U.S. and other countries. SpotShop,
Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside
logo, and Pentium are registered trademarks and MMX is a trademark of Intel
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered
trademarks of Microsoft Corporation. All other product names mentioned herein
are used for identification purposes only, and may be the trademarks or
registered trademarks of their respective companies.
10
MAN CYCLOPS EXT ODD GDE R0 03/06

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Languages