Contents
About Your New Label Maker ................................................................................................................................. 5
Warranty Registration.........................................................................................................................................................................5
Getting Started..................................................................................................................................................... 5
Connecting the Power.........................................................................................................................................................................5
Inserting the Batteries....................................................................................................................................................................5
Connecting the Power Adapter.......................................................................................................................................................5
Inserting the Tape Cassette.................................................................................................................................................................5
Settings................................................................................................................................................................ 6
Selecting the Language.......................................................................................................................................................................6
Selecting Units of Measure..................................................................................................................................................................6
Printing Your First Label......................................................................................................................................................................6
Getting to Know the Label Maker........................................................................................................................... 7
Power...................................................................................................................................................................................................7
LCD Display..........................................................................................................................................................................................7
CAPS Mode..........................................................................................................................................................................................7
Shift Key..............................................................................................................................................................................................7
Space Bar.............................................................................................................................................................................................7
Backspace............................................................................................................................................................................................7
Cancel..................................................................................................................................................................................................7
Navigation Keys...................................................................................................................................................................................7
Formatting Your Label........................................................................................................................................... 8
Changing the Font...............................................................................................................................................................................8
Adding Font Styles...............................................................................................................................................................................8
Adding Boxes and Background Styles..................................................................................................................................................8
Creating Multiple-Line Labels.............................................................................................................................................................9
Using Mixed Formats...........................................................................................................................................................................9
Using Tabs..........................................................................................................................................................................................10
Using Symbols and Special Characters...................................................................................................................10
Adding Symbols.................................................................................................................................................................................10
Adding International Characters.......................................................................................................................................................11
Currency Symbols..............................................................................................................................................................................11
Printing Options...................................................................................................................................................11
Printing Multiple Copies....................................................................................................................................................................11
Serializing your Labels.......................................................................................................................................................................11
Setting a Fixed Label Length.............................................................................................................................................................11
Previewing Your Label.......................................................................................................................................................................12
2
LM350D manual UK_WEU.indd 2
09-08-2007 13:44:23
Aligning the Text................................................................................................................................................................................12
Changing the Cutting Option.............................................................................................................................................................12
Adjusting the Print Contrast...............................................................................................................................................................12
Using Label Maker Memory...................................................................................................................................12
Storing Label Text..............................................................................................................................................................................12
Storing Formats..................................................................................................................................................................................13
Recalling Stored Labels and Formats.................................................................................................................................................13
Caring for Your Label Maker...................................................................................................................................13
Cleaning the Label Maker...................................................................................................................................................................13
DYMO D1 Tape Cassettes........................................................................................................................................14
Power Adapter......................................................................................................................................................14
Troubleshooting...................................................................................................................................................15
Documentation Feedback......................................................................................................................................16
Environmental Information..................................................................................................................................16
3
LM350D manual UK_WEU.indd 3
09-08-2007 13:44:24
20
21
22
1
19
2
18
17
16
3
4
5
15
14
13 12 11
10
9
8
7
6
9
Figure 1 LabelManager 350D Electronic Label Maker
1
2
3
4
5
6
7
8
Tape exit
Cutter
Print
Cancel
Navigation
Return
Currency
Backspace/Clear
9
10
11
12
13
14
15
16
Shift
Box/Align
Styles/Fixed-length
Font
Space bar
CAPS
Tab
Extra
17
18
19
20
21
22
Symbols
Settings
Power
Memory
AC power connector
LCD display
4
LM350D manual UK_WEU.indd 4
09-08-2007 13:44:25
About Your New Label Maker
With your new DYMO LabelManager 350D electronic label
maker, you can create a wide variety of high-quality,
self-adhesive labels. You can choose to print your labels in
many different sizes and styles. The label maker uses DYMO D1
tape cassettes in widths of 6 mm (1/4”), 9 mm (3/8”), 12 mm
(1/2”), or 19 mm (3/4”). These tape cassettes are available in a
wide range of materials.
Visit www.dymo.com for information on obtaining tapes
and accessories for your label maker.
Warranty Registration
Visit www.dymo.com/registration to register your label
make online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker can operate on AC or battery power. To save
power, the label maker will automatically turn off after two
minutes of inactivity.
Inserting the Batteries
The label maker uses six AA batteries.
To insert the batteries
2. Insert the batteries following the polarity markings
(+ and –).
3. Close the compartment door.
x Remove the batteries if the label maker will not be used
for a long period of time.
Connecting the Power Adapter
Connecting the power adapter to the label maker disconnects
the batteries as a power source.
To connect the power adapter
1. Plug the power adapter into the power connector on the
top, left side of the label maker.
2. Plug the other end of the power adapter into a power
outlet.
x Make sure you disconnect the label maker from the power
adapter before you unplug the adapter from the main power
source. Otherwise, the most recent memory settings will be
lost.
Inserting the Tape Cassette
Your label maker comes with one DYMO D1 tape cassette.
Visit www.dymo.com for information about purchasing
additional tape cassettes.
To insert the tape cassette
1. Press and release the tape cassette cover to open the tape
compartment. See Figure 3.
1. Remove the battery compartment cover. See Figure 2.
Figure 2
Figure 3
5
LM350D manual UK_WEU.indd 5
09-08-2007 13:44:26
x The first time you use the label maker, remove the
protective cardboard insert from between the print head
and pinch roller. See Figure 4.
Remove
cardboard
insert
5. Press firmly until cassette clicks into place. Make sure the
tape and ribbon are positioned correctly.
6. Close the tape cassette cover and press A to turn on the
power.
Settings
You can select the language and corresponding units of
measure you want the label maker to use.
Selecting the Language
You can select from a number of different language options.
By default, the language is set to English.
To select a language
Figure 4
2. Set the cassette switch for the size of the tape cassette that
you are inserting. See Figure 4.
A notch in the cassette fits over the switch when the
cassette is in the correct position.
3. Make sure the tape and ribbon are taut across the mouth
of the cassette and that the tape passes between the
guideposts. If necessary, turn the spool clockwise to
tighten the ribbon.
4. Insert the cassette with the tape and ribbon positioned
between the print head and pinch roller. See Figure 5.
1. Press Settings .
2. Use the arrow keys to select Set Language and press H.
3. Select the language you want and press H.
Selecting Units of Measure
You can choose to show measurements in inches or millimeters. By default, the units of measure are set to inches.
To set the units of measure
1. Press Settings .
2. Use the up and down arrow keys to select Set Units and
press H.
3. Use the up and down arrow keys to toggle between inches
and millimeters and press H.
Printing Your First Label
You are now ready to print your first label.
To print a label
CLICK!
CLICK!
1. Press the A button.
2. Enter text to create a simple label.
3. Press the Print button to print the label.
Congratulations! You have printed your first label. Continue
reading to learn more about the font, styles, and formatting
options available.
Figure 5
6
LM350D manual UK_WEU.indd 6
09-08-2007 13:44:28
Getting to Know the Label Maker
The following sections describe each feature in detail. Become
familiar with the location of the feature and function keys on
your label maker. See Figure 1.
Power
The A button turns the power on and off. After two minutes
of no activity, the power is switched off automatically. The last
label created is remembered and displayed when the power
is turned back on. The previously selected style settings are
also restored.
LCD Display
The label maker’s LCD display shows a row of sixteen
characters. However, you can enter up to 99 characters/spaces.
Feature indicators appear on the display to let you know when
a feature is selected. See Figure 6.
Box/
Underline
Style
Font
Scrollbar
CAPS Mode
The æ key toggles capitalization on and off. When CAPS
mode is turned on, the CAPS mode indicator is shown on the
display and all letters that you enter will be capitalized. When
CAPS mode is off, all letters entered appear in lower case.
Shift Key
The F key, when used in combination with an alphabet
key, changes the case of the selected letter. When used in
combination with number keys or function keys, the F
key selects the alternate function shown on the key. For
example, when you press æ the character to the left of
the cursor is deleted; however, when you press F+ æ
together, the entire label text and formatting is deleted and
the display is ready for you to type a new label.
Space Bar
The Space Bar inserts one blank space in your text.
Backspace
The æ key removes the character to the left of the cursor.
F+ æ clears all the label text and formatting.
Cancel
The
key allows you to exit from a menu without making
a selection or to cancel an action.
Auto Cut
# of Copies
Mixed Formats
Align/Justify
Fixed Length
CAPS Mode
Multiple Lines
Navigation Keys
You can review and edit your label using the left and right
arrow keys. You can navigate through the menu selections
using the up and down arrow keys. You then press H to
make your selection.
Figure 6
7
LM350D manual UK_WEU.indd 7
09-08-2007 13:44:30
Formatting Your Label
Normal
You can choose from a number of formatting options to
enhance the appearance of your labels.
x The label maker remembers the last feature selection
made so that each time you enter one of the feature menus
described in this section, you are positioned at the last item
selected from that menu.
Vertical
Italic
Bold
Outline
Shadow
Changing the Font
3D
You can choose from six different fonts to apply to your text:
Arial Narrow
Arial Normal
Times New Roman
Arial Wide
BIG
Italic + bold
Italic + outline
Italic +Shadow
Italic +3D
Strikethrough
When you specify a font style, that style applies to all
characters on the current page.
Mirror
To set the font
1. Press the
key.
2. Use the arrow keys to move to the desired font and then
press H.
Adding Font Styles
You can choose from 13 different font styles to apply to your
text. See Figure 7.
Only one style can be used at a time. Styles can be used with
alphanumeric characters and symbols. See “Using Symbols
and Special Characters” for more information on printing
symbols.
Figure 7
To set the font style
1. Press the
key.
2. Use the arrow keys to move to the desired style and then
press H.
Adding Boxes and Background Styles
You can further highlight your text by choosing a box,
underline or background style. A label can be underlined or
enclosed in a box or background, but not both together. The
styles available are shown in Figure 8.
8
LM350D manual UK_WEU.indd 8
09-08-2007 13:44:32
MO
MO
MO
MO
Creating Multiple-Line Labels
Underline
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
Square
Box
DYMO
DYMO
Pointed
Box
DYMO
DYMO
DYMO
DYMO
DYMOBox
Rounded
DYMO
DYMO
DYMO
DYMO
Scroll Box
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
DYMO
Crocodile
DYMOBox
3D Box
Dots
Wood Grain
The number of lines you can print on a label depends on the
size label tape you are using:
• Maximum of three lines on 19 mm labels
• Maximum of two lines on 9 mm and
12 mm labels
• Maximum of one line on 6 mm labels
To create a multiple-line label
1. Type the text for the first line, and press D.
A new line character ë is placed at the end of the first line
in the display, but will not print on the label.
2. Type the text for the second line.
The display shows the line on which you are currently
entering text. The example below indicates that the second
line is the current line on the label.
Bricks
Checkers
3. Use the arrow keys to move from one line to another.
Parquet
Using Mixed Formats
Diamonds
Weave
Figure 8
To set the box style
1. Press the
key.
2. Use the arrow keys to move to the desired box style and
then press H.
On two-line labels, both lines are underlined. However, both
lines are enclosed in a single box for the box styles.
You can apply different fonts and format styles to the text on
a label by dividing the label into blocks of text or pages. Each
page is separated by a page break.
The number of lines that can be added to a page is determined
by the label width. You can add two page breaks to a label.
x Alignment, underline, box styles, and background
patterns cannot be mixed on a label. These styles are common
to the entire label.
To add a page break
1. Enter and format text for the first page of the label.
2. Press
.
3. Use the arrow keys to select Insert Format Break and
press H.
4. Continue entering and formatting text for the next page
of the label.
9
LM350D manual UK_WEU.indd 9
09-08-2007 13:44:35
Using Tabs
You can add tabs to a label to align text on multi-line labels. Tabs
are left justified and the default spacing is 50 mm (2.0”).
To change the tab spacing
1. Press Settings .
2. Use the arrow keys to select Set Tab Length and press
H.
3. Use the up and down arrow keys to increase or decrease the
tab setting, and then press H.
To insert a tab
1. Enter your text.
2. Press the æ key and continue entering text.
Using Symbols and Special
Characters
Symbols and other special characters can be added to your
labels.
Adding Symbols
The label maker supports the extended symbol set as shown
in Figure 9.
To add a symbol
1. Press
.
The first row of symbols shown in the table appears in the
display.
2. Use the arrow keys to move to the desired symbol.
The left and right arrows scroll horizontally along the row
of symbols. The up and down arrow keys scroll vertically
through the rows of symbols. To quickly see a row of symbols,
you can press the letter corresponding to the row you want.
3. When you locate the desired symbol, press H to add the
symbol to your label text.
Figure 9
10
LM350D manual UK_WEU.indd 10
09-08-2007 13:44:36
Adding International Characters
Serializing your Labels
The label maker supports the extended Latin character set
using RACE technology. Similar to using a mobile phone
keypad, if you press a letter multiple times within a very short
time, you will scroll through variations of that letter.
For example, if you repeatedly press the letter a, you will see
a à á â ã ä å and so on through all the variations available. The
order in which the character variations appear depends on the
language you have chosen to use.
You can print a series of labels with the last number
incremented by one number.
The number of labels serialized depends upon the number of
copies you selected to print. Only the last series of numbers
that follows any letter, space, or punctuation will be serialized.
For example, abc123 will print as abc123, abc124, abc125; and
123-998 will print as 123-998, 123-999, 123-1000, and so on.
Currency Symbols
1. Enter the text for your label.
2. Select the number of labels to print as described in
Printing Multiple Copies.
3. Press .
4. Use the arrow keys to select Incremental Print and
press H.
5. Press Print .
The currency key € also uses RACE to scroll through a number
of currency symbols:
€ £ $ ¢ ¥
The order these symbols appear depends on the keyboard
version and language you have selected.
To serialize your labels
Printing Options
Setting a Fixed Label Length
You can print multiple copies of the same label, print serialized
and fixed-length labels, review label text and format, and
adjust the printing contrast.
Normally, the length of the label is determined by the length
of the text entered. However, you may wish to make a label
for a specific purpose that is a fixed length regardless of the
length of the text.
You can specify a fixed length for a label in 2 mm (0.1”)
increments from 40 mm to 400 mm. The preset fixed length
is 100 mm. Any change you make to the fixed-length setting
remains in effect until you change it.
Printing Multiple Copies
You can print up to 16 copies of a label at one time. When the
Auto-Cut feature is off, a dotted cut-line is printed between
each label.
To print multiple copies of the label
1. Press
and then use the arrow keys to set
# Copies.
2. Press the up arrow key to increase the number of copies
to print.
3. Press the down arrow key to begin decreasing the number
of copies from 16.
4. Press H.
5. Press Print to begin printing.
x You may notice a brief pause in printing between each
label for more complex formats. When printing is finished, the
number of copies to print returns to the default value of 1.
To set the label length
1. Press F +
.
2. Use arrow keys to select ON and press H.
3. Press the up arrow to increase the length.
4. Press the down arrow to decrease the length.
5. Press H to set the fixed length.
6. After you print the label, press 6 to turn off the fixed
label length setting; otherwise, all your subsequent labels
will print with this fixed length.
11
LM350D manual UK_WEU.indd 11
09-08-2007 13:44:37
Previewing Your Label
You can preview the text or format of your label prior to
printing. A multiple-line label is previewed as a single-line.
To preview your label
1. Press .
2. Use the down arrow key to select Print Preview and
press H.
3. Use the arrow keys to select Text or Format.
If you select Text, the text of the label scrolls across the
display. If you select Format, the format selected displays
briefly.
Aligning the Text
When you print a fixed length label you can choose to align the
text at the left, center, or right side of the label. For multi-line
labels, all lines of text are aligned left, center, or right relative
to each other.
To align the text
1. Press F+
.
2. Use the arrow keys to select the desired alignment and
press H.
3. Press 6 to turn off the alignment setting.
Changing the Cutting Option
You can choose to have each label automatically cut after
printing or you can manually cut the labels using the Cutter
key. By default, labels are cut automatically. When manual
cutting is selected and you print multiple copies or serialized
labels, a dotted cut-line is printed between each label.
To change the cutting option
1. Press Settings .
2. Use the arrow keys to select Set Auto Cut and press H.
3. Use the arrow keys to select Auto Cut On or Off, and then
press H.
This setting will remain until you change it.
To set the contrast
1. Press Settings .
2. Use the arrow keys to select Set Contrast and press H.
3. Use the arrow keys to select one of the five contrast settings
and press H.
Using Label Maker Memory
The label maker has a powerful memory feature that stores
text and formatting as follows:
• Automatically stores the last nine labels printed.
• Allows you to store the text of up to nine labels you use
frequently.
• Allows you to name and store up to nine commonly used
label formats.
Storing Label Text
The label maker automatically keeps the last nine labels
printed in a text buffer. In addition, you can store up to nine
specific labels you use frequently.
To store the current label text
1. Press Memory .
2. Use the arrow keys to select SAVE and then LABEL.
Nine fields, which represent memory locations, are
displayed. Fields that are filled indicate stored label text.
You can store new text in any of the memory locations,
however, if you select a location that is filled, the previous
label text will be overwritten.
3. Use the arrow keys to select a memory location and
press H.
Your label text is saved and you are returned to the label.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print quality
of your label.
12
LM350D manual UK_WEU.indd 12
09-08-2007 13:44:38
Storing Formats
In addition to label text, you can store up to nine specific
label formats you use frequently. This feature stores only the
formatting information not the label text.
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance.
To store the current format
Cleaning the Label Maker
1. Press
.
2. Use the arrow keys to select SAVE and then 2.
3. A list of nine fields, which represent memory locations,
are displayed. Fields that contain formats display a name
in the field. You can store new formats in any of the fields,
however, if you select a location that is filled, the previous
label format will be overwritten.
4. Use the arrow keys to select a field and press H. The word
NAME? appears in the field.
5. Enter a name for the format and press H. Your label
format is saved and you are returned to the label.
Clean your label maker from time to time to keep it working
properly. Clean the cutter blade each time you replace the tape
cassette.
Memory
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in memory to
use at a later time.
To recall labels or formats
1. Press Memory .
2. Use the arrow keys to select Recall and then LABEL,
FORMAT, or LAST PRINTED.
3. A list of memory locations is displayed similar to storing a
label or format.
4. Use the arrow keys to select a label or format to recall and
press H.
To clean the cutter blade
1. Turn the power to the label maker off.
2. Press A and the
key together.
The message CUT TEST appears on the display.
3. Press and hold the F +
keys.
4. When you are able to access both sides of the blade, release
the keys.
5. Use a cotton bud and alcohol to clean both sides of the
cutter blade.
èThe cutter blade is extremely sharp. Use caution when
cleaning.
6. After cleaning the blade, press
to return the blade to
its home position.
x You can also follow this procedure if the cutter blade
becomes lodged in the forward position and will not move.
To clean the print head
1. Remove the tape cassette.
2. Remove the cleaning tool from inside the label
compartment cover.
3. Gently wipe the padded side of the tool across the print
head. See Figure 11.
Figure 11
13
LM350D manual UK_WEU.indd 13
09-08-2007 13:44:39
DYMO D1 Tape Cassettes
Width:
Length:
Black/Clear
6 mm
7m
S0720770
43610
9 mm
7m
S0720670
12 mm
7m
S0720500
19 mm
7m
S0720820
40910
45010
45800
Blue/Clear
___
___
S0720510
45011
___
Red/Clear
___
___
S0720520
45012
___
Black/White
S0720780
S0720680
S0720530
S0720830
___
S0720690
S0720540
S0720840
___
S0720700
S0720550
S0720850
___
S0720710
S0720560
S0720860
Black/Red
___
S0720720
S0720570
S0720870
Black/Yellow
S0720790
S0720730
S0720580
S0720880
___
S0720740
S0720590
S0720890
___
S0720600
S0720900
S0720910
Blue/White
Red/White
Black/Blue
Black/Green
White/Clear
43613
43618
___
40913
40914
40915
40916
40917
40918
40919
45013
45014
45015
45016
45017
45018
45019
45020
45803
45804
45805
45806
45807
45808
45809
45810
White/Black
___
___
S0720610
Width:
Length:
6 mm
3,5 m
9 mm
3,5 m
Flexible labels for curved surfaces
___
___
12 mm
3,5 m
S0718040
19 mm
3,5 m
S0718050
Width:
Length:
6 mm
5,5 m
9 mm
5,5 m
Permanent labels
___
___
12 mm
5,5 m
S0718060
19 mm
5,5 m
S0718070
45021
16957
16959
45811
16958
16960
Power Adapter
UK Adapter S0721430 / 40075
European Adapter S0721440 / 40076
14
LM350D manual UK_WEU.indd 14
09-08-2007 13:44:39
Troubleshooting
Review the following possible solutions if you encounter a problem while using your printer.
Problem/Error Message
Solution
No display
• Ensure the printer is turned on.
• Replace discharged batteries.
Poor Print Quality
•
•
•
•
Poor Cutter Performance
Clean the cutter blade.
See Caring for Your Label Maker.
Printing…
No action required. Message will disappear once printing is finished.
Too many lines
Exceeded maximum number of lines allowed
Change layout of label or tape size.
Too many characters
Exceeded maximum number of characters in buffer
Delete some or all of the buffer text.
Insert Tape Cassette
Tape cassette missing or empty
Insert a new tape cassette.
Battery Low
Batteries almost discharged
Replace batteries or connect DC power adapter.
Tape Jam
Motor is stilled due to tape jam
Remove jammed tape and replace tape cassette.
Replace discharged batteries.
Ensure tape cassette is installed properly.
Clean the print head.
Replace the tape cassette.
Page not empty
Delete all content on the page
Tape size too small
Set
Fixed-length label is selected and the length necessary to
print the label exceeds the selected length.
• Change tape size or press Cancel to exit
• Box/Background menu
Following this message, a fixed-length value is displayed which indicates the
minimum label length necessary to fit the text. Do one of the following:
• Adjust the fixed-length label setting, or
• Select a narrower font.
If you still need assistance, contact DYMO Customer Support for your country. The Warranty booklet includes a list of contact
numbers for each country.
15
LM350D manual UK_WEU.indd 15
09-08-2007 13:44:39
Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your feedback:
Product name, version number, and page number
• Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)
• We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: documentation@dymo.com
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact
Customer Support.
Environmental Information
The equipment that you have bought requires the extraction and use of natural resources for its production. It may contain
substances that are hazardous to health and the environment.
In order to avoid the dissemination of those substances in our environment, and to diminish the pressure on natural resources,
we encourage you to use the appropriate take-back systems. These systems will reuse or recycle most of the materials of your
end-of-life equipment in an environmentally sound way.
The crossed-bin symbol marked on your device indicates you should use these systems.
If you need more information on the collection, reuse, and recycling of this product, please contact your local or regional waste
administration.
You can also contact us for more information on the environmental performance of our products.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:
US FCC Class B Compatibility
Safety - UL, CUL, TUV, CE, T-Mark, SAA, BABT, C-Tick
EMC - EMI Compatibility
EN 55022; EN 61000 (+ addendums)
RoHS 2002/95/EC
16
LM350D manual UK_WEU.indd 16
09-08-2007 13:44:40
17
LM350D manual UK_WEU.indd 17
09-08-2007 13:44:40
LM350D manual UK_WEU.indd 18
09-08-2007 13:44:40
CONTACTING CUSTOMER SUPPORT
Country
United Kingdom
Telephone Support
020 73 41 55 29
Fax Support
+ 31 20 581 93 80
Ireland
014 118 934
+ 31 20 581 93 80
France
01 69 32 49 32
+ 31 20 581 93 80
Nederland
020 581 93 86
020 581 93 80
België - Belgique
02 713 38 08
+ 31 20 581 93 80
Deutschland
069 66 56 85 29
+ 31 20 581 93 80
Österreich
01 599 14 20 12
+ 31 20 581 93 80
Schweiz - Suisse
044 342 04 66
+ 31 20 581 93 80
Sverige
08 632 00 57
+ 31 20 581 93 80
Norge
22 97 17 10
+ 31 20 581 93 80
Danmark
35 25 65 08
+ 31 20 581 93 80
Suomi
09 229 07 04
+ 31 20 581 93 80
Italia
02 45 28 13 08
+ 31 20 581 93 80
España
91 662 31 49
+ 31 20 581 93 80
Portugal
21 120 61 64
+ 31 20 581 93 80
Polska
022 349 15 02
+ 31 20 581 93 80
Magyar
01 777 49 31
+ 31 20 581 93 80
Česká republika
239 000 448
+ 31 20 581 93 80
+ 420 603 216 958
+ 31 20 581 93 80
Australia
1800 633 868
1800 727 537
New Zealand
0800 848 111
09 257 1080
Hong Kong
852 2690 4003
852 2690 4005
Slovenská republika
International
LM350D manual UK_WEU.indd 19
+ 31 20 50 40 566
+ 31 20 581 93 80
09-08-2007 13:44:40
931651
©2007 DYMO
A Newell Rubbermaid company
DYMO bvba
Industriepark-Noord 30
9100 Sint-Niklaas
Belgium
www.dymo.com
LM350D manual UK_WEU.indd 20
09-08-2007 13:44:40
Download PDF

advertising