Sears | NordicTrack C1550 831.24922.0 | Specifications | Sears NordicTrack C1550 831.24922.0 Specifications

www.nordictrack.com
Model No. 831.24922.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’’S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal in
the location shown. Note: The decals may
not be shown at actual size.
NORDICTRACK is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read
all important precautions and instructions in this manual and all warnings on your treadmill before
using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12. Plug the power cord into a surge suppressor
(not included), and plug the surge suppressor into an appropriate outlet (see page 13).
To avoid overloading the circuit, do not plug
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
3. Use the treadmill only as described in this
manual.
13. Use only a surge suppressor that meets all of
the specifications described on page 13. To
purchase a surge suppressor, see your local
NORDICTRACK dealer, call the telephone
number on the front cover of this manual, or
see your local electronics store.
4. The treadmill is intended for home use only.
Do not use the treadmill in any commercial,
rental, or institutional setting.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
15. Keep the power cord and the surge suppressor away from heated surfaces.
16. Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 23 if the treadmill is not working properly.)
7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
8. Keep children under age 12 and pets away
from the treadmill at all times.
17. Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on
page 15).
9. The treadmill should be used only by persons weighing 375 lbs. (170 kg) or less.
10. Never allow more than one person on the
treadmill at a time.
18. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
11. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recommended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
19. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
3
20. The heart rate monitor is not a medical
device. Various factors, including the user’’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
24. Do not change the incline of the treadmill by
placing objects under the treadmill.
25. Never insert any object into any opening on
the treadmill.
26. Inspect and properly tighten all parts of the
treadmill regularly.
21. Never leave the treadmill unattended while
it is running. Always remove the key, press
the power switch into the off position (see
the drawing on page 5 for the location of the
power switch), and unplug the power cord
when the treadmill is not in use.
27.
DANGER: Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
22. Do not attempt to move the treadmill until
it is properly assembled. (See ASSEMBLY
on page 7 and HOW TO FOLD AND MOVE
THE TREADMILL on page 22.) You must be
able to safely lift 45 lbs. (20 kg) to move the
treadmill.
28. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
23. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
NORDICTRACK® C 1550 treadmill. The C 1550 treadmill offers an impressive selection of features designed
to make your workouts at home more enjoyable and
effective. And when you’’re not exercising, the unique
treadmill can be folded up, requiring less than half the
oor space of other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benet, read this manual carefully before
using the treadmill. If you have questions after
Length: 6 ft. 10 in. (208 cm)
Width: 3 ft. 1 in. (94 cm)
Console
Tray
Heart Rate Monitor
Handrail
Key/Clip
Upright
Power Switch
Walking Belt
Foot Rail
Power Cord
Platform Cushion
Idler Roller
Adjustment Screws
5
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra parts may be included.
5/16" Star
Washer (5)––4
#8 x 1/2"
Screw (101)––2
3/8" Nut (6)––2
#8 x 3/4" Screw
(1)––2
5/16" x 1 1/2"
Screw (3)––4
5/16" x 1"
Screw (2)––8
3/8" x 2" Bolt (24)––1
3/8" x 1 3/4" Bolt (4)––1
6
ASSEMBLY
•• To watch an assembly
video, go to
http://productvideo.co/
assembly/sears/
nordictrack or use your
mobile phone or smartphone to read the QR
code at the right.
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
•• Left parts are marked ““L”” or ““Left”” and right parts
are marked ““R”” or ““Right.””
•• To identify small parts, see page 6.
•• Assembly requires two persons.
•• Assembly requires the following tools:
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
the included hex key
•• The underside of the walking belt is coated with
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
one Phillips screwdriver
one adjustable wrench
To avoid damaging parts, do not use power tools.
1. Make sure that the power cord is unplugged.
1
With the help of a second person, raise the
Upright (73) to the vertical position.
73
Attach the Left Base Leg (85) to the left side of
the Upright (73) with two 5/16" x 1" Screws (2).
Attach the Right Base Leg (not shown) to the
right side of the Upright (73) in the same way.
2
85
2. Identify the Left and Right Upright
Covers (82, 83).
2
Slide the Left Upright Cover (82) onto the left
Upright (73). Slide the Right Upright Cover (83)
onto the right Upright.
83
73
Then, press the Left and Right Upright Covers
(82, 83) downward until they snap into place.
82
7
3. Remove the tie securing the Upright Wire (78) to
the left Upright (73).
3
A
With the help of a second person, hold the console assembly (A) near the Upright (73).
2
Attach the console assembly (A) with four 5/16"
x 1" Screws (2) and four 5/16" Star Washers (5).
See the inset drawing. Be careful not to pinch
the wires (B, 78). Start all four Screws, and
then tighten them.
5
2
5
B
73
4. Connect the Upright Wire (78) to the console
wire (B). See the inset drawing. The connectors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
78
78
B
4
Insert the wires (B, 78) into the console
assembly (A).
78
B
A
B
78
8
5. Identify the left handrail assembly (C).
5
Attach the left handrail assembly (C) with two
5/16" x 1 1/2" Screws (3). Start both Screws,
and then tighten them. Be careful not to
pinch the wires.
A
C
Attach the right handrail assembly in the
same way.
3
3
6. Tighten a #8 x 1/2" Screw (101) and a #8 x 3/4"
Screw (1) into the console assembly (A) and the
left handrail assembly (C) in the locations shown.
Do not overtighten the Screws.
6
A
1
Tighten a #8 x 1/2" Screw (not shown) and a
#8 x 3/4" Screw (not shown) into the console
assembly and the right handrail assembly.
C
101
9
7. Raise the Frame (52) to the position shown.
Have a second person hold the Frame until
step 8 is completed.
7
Orient the Storage Latch (49) so that the large
barrel and the latch knob are in the positions
shown.
52
Attach the lower end of the Storage Latch (49) to
the Upright (73) with a 3/8" x 2" Bolt (24) and a
3/8" Nut (6).
73
Latch
Knob
6
24
49
Large
Barrel
8. Attach the upper end of the Storage Latch (49)
to the Frame (52) with a 3/8" x 1 3/4" Bolt (4)
and a 3/8" Nut (6). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
8
Lower the Frame (52) (see HOW TO LOWER
THE TREADMILL FOR USE on page 22).
52
6
4
49
10
9. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 24 and 25).
10. IMPORTANT: See page 13 and plug in the
power cord. Next, see page 15 and turn on
the power.
10
Press the 1 Step Incline/Decline button numbered -3. Then, adjust the incline to the level
desired. IMPORTANT: To avoid damaging the
treadmill, adjust the incline to zero percent
before you fold the treadmill.
11
IMPORTANT:
Make sure to follow
all instructions in
this step
THE CHEST HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate
monitor consists of
a chest strap and a
sensor. Insert the
tab on one end of
the chest strap into
the hole in one end
of the sensor as
shown. Then, press
the end of the sensor under the buckle
on the chest strap.
The tab should be
flush with the front of
the sensor.
Tabs
Chest
Strap
••
Do not expose the heart rate monitor to direct sunlight for extended periods of time; do not expose it
to temperatures above 122° F (50° C) or below 14°
F (-10° C).
••
Do not excessively bend or stretch the sensor when
using or storing the heart rate monitor.
••
To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with a
damp cloth and thoroughly dry it with a soft towel.
Never use alcohol, abrasives, or chemicals to clean
the sensor. Hand wash and air dry the chest strap.
Sensor
Tab
TROUBLESHOOTING
If the heart rate monitor does not function properly, try
the steps below.
Sensor Buckle
The heart rate monitor must be worn
under your clothes,
tight against your
skin. Wrap the heart
rate monitor around
your chest in the
location shown.
Make sure that
the logo is rightside-up. Then, attach the other end of the chest strap
to the sensor. Adjust the length of the chest strap, if
necessary.
Pull the sensor away from your body a few inches and
locate the two electrode areas, which are covered by
shallow ridges. Using saline solution such as saliva or
contact lens solution, wet the electrode areas. Then,
return the sensor to a position against your chest.
CARE AND MAINTENANCE
••
Thoroughly dry the sensor with a soft towel after
each use. Moisture may keep the sensor activated,
shortening the life of the battery.
••
Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.
12
••
Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
••
If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
••
For the console to display heart rate readings, you
must be within arm’’s length of the console.
••
If there is a battery cover on the back of the sensor,
replace the battery with a new battery of the same
type.
••
The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical conditions such as premature ventricular contractions
(pvcs), tachycardia bursts, and arrhythmia.
••
The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that magnetic
interference is causing a problem, try relocating the
fitness equipment.
OPERATION AND ADJUSTMENT
HOW TO CONNECT THE POWER CORD
nominal 120-volt circuit capable of carrying 15 or
more amps. To avoid overloading the circuit, do
not plug other electrical devices, except for lowpower devices such as cell phone chargers, into
the surge suppressor or into an outlet on the same
circuit. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
Use a Surge Suppressor
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’’s
power. Voltage surges, spikes, and noise interference can result from weather conditions or from other
appliances being turned on or off. To decrease the
risk of damaging the treadmill, always use a surge
suppressor with the treadmill. To purchase a surge
suppressor, see precaution 13 on page 3.
1
Grounded Outlet
Grounding Pin
Use only a surge suppressor that is UL 1449 listed as a
transient voltage surge suppressor (TVSS). The surge
suppressor must have a UL suppressed voltage rating
of 400 volts or less and a minimum surge dissipation of
450 joules. The surge suppressor must also be electrically rated for 120 volts AC and 15 amps. There must
be a monitoring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a
properly functioning surge suppressor could result
in damage to the control system of the treadmill
and serious injury to users.
Grounding Pin
Surge
Suppressor
Plug in the Power Cord
A temporary
adapter may
be used to
connect the
surge suppressor to
a 2-pole
receptacle
if a properly
grounded
outlet is not
available.
The treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. The treadmill power cord has a plug with a
grounding pin (see drawing 1 on this page).
DANGER: Improper connection
of the power cord increases the risk of electric shock. Do not modify the plug——if it will
not fit an outlet, have a proper outlet installed
by a qualified electrician. If you are unsure
whether the treadmill is properly grounded,
contact a qualified electrician.
2
2-pole Receptacle
Adapter
Lug
Metal
Screw
The lug or wire extending from the adapter must
be connected with a metal screw to a permanent
ground such as a properly grounded outlet box cover.
Some 2-pole receptacle outlet box covers are not
grounded. Before using an adapter, contact a qualified electrician to determine whether the outlet box
cover is grounded. The temporary adapter should
be used only until a properly grounded outlet can
be installed by a qualified electrician.
Plug the power cord into a surge suppressor, and plug
the surge suppressor into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances. The outlet must be on a
13
CONSOLE
DIAGRAM
FEATURES OF THE CONSOLE
You can even listen to your favorite workout music or
audio books with the console’’s stereo sound system
while you exercise.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. When you use the manual mode,
you can change the speed and incline of the treadmill
with the touch of a button. As you exercise, the console
will display instant exercise feedback. You can even
measure your heart rate using the handgrip heart rate
monitor or the chest heart rate monitor.
To turn on the power, see page 15. To use the manual mode, see page 15. To use an onboard workout,
see page 18. To use a set-a-goal workout, see page
19. To use an iFit workout, see page 19. To use the
stereo sound system, see page 20. To use the information mode, see page 21.
In addition, the console features thirty-four onboard
workouts——nine calorie workouts, eight intensity workouts, nine incline workouts, and eight speed workouts.
Each workout automatically controls the speed and
incline of the treadmill as it guides you through an effective exercise session.
Note: The console can display speed and distance in
either miles or kilometers. To nd which unit of measurement is selected, see THE INFORMATION MODE
on page 21. For simplicity, all instructions in this manual refer to miles.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The rst time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 25).
The console also features a revolutionary iFit mode
that enables the treadmill to communicate with your
wireless network through an optional iFit module. With
the iFit mode, you can download personalized workouts, create your own workouts, track your workout
results, race against other runners, and access many
other features. To purchase an iFit module at any
time, go to www.iFit.com or call the telephone
number on the front cover of this manual.
14
HOW TO TURN ON THE POWER
HOW TO USE THE MANUAL MODE
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
1. Insert the key into the console.
Plug in the power cord (see
page 13). Next, locate the
power switch on the treadmill
frame near the power cord.
Press the power switch into
the reset position.
See HOW TO TURN ON THE POWER at the left.
2. Select the manual mode.
Press the Manual Control button on the console. If
you are not connected to iFit, the manual mode will
be selected automatically.
Reset
3. Start the walking belt.
To start the walking belt, press the Start button, the
Speed increase button, or one of the numbered 1
Step Speed buttons.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see THE INFORMATION MODE on page
21 to turn off the demo mode.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 1
mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press
one of the buttons, the speed setting will change
by 0.1 mph; if you hold down the button, the speed
setting will change in increments of 0.5 mph. Note:
After you press the button, it may take a moment
for the walking belt to reach the selected speed
setting.
Next, stand on the
foot rails of the
Key
treadmill. Find the
clip attached to the
Clip
key and slide the
clip onto the waistband of your clothes.
Then, insert the key
into the console.
After a moment, the displays will light.
IMPORTANT: In an emergency, the key can be
pulled from the console, causing the walking belt
to slow to a stop. Test the clip by carefully taking
a few steps backward; if the key is not pulled from
the console, adjust the position of the clip.
If you press one of the numbered 1 Step Speed
buttons, the walking belt will gradually change
speed until it reaches the selected speed setting.
To select a speed setting that includes a decimal——
such as 3.5 mph——press two numbered buttons in
succession. For example, to select a speed setting
of 3.5 mph, press the 3 button and then immediately press the 5 button. Note: This will not function
if the console is set to metric units.
To stop the walking belt, press the Stop button.
The time will begin to ash in the display. To restart the walking belt, press the Start button or the
Speed increase button.
15
4. Change the incline of the treadmill as desired.
The My Trail tab will show a track that represents
1/4 mile (400 m). As you exercise, the ashing rectangle will show your progress. The My Trail tab will
also show the number of laps you complete.
To change the incline of the treadmill, press the
Incline increase or decrease button or one of the
numbered 1 Step Incline/Decline buttons. Each
time you press one of the buttons, the treadmill will
gradually adjust to the selected incline setting.
The Calorie tab will show the approximate amount
of calories you have burned. The height of each
segment represents the amount of calories burned
during that segment.
5. Follow your progress with the displays.
As you walk or run on the treadmill, the display can
show the following workout information:
As you exercise, the workout intensity level bar
will indicate the approximate intensity level of your
exercise.
•• The elapsed time
•• The distance that you have walked or run
•• The workout intensity bar
•• The approximate number of calories you have
burned
Press the Home button to return to the default
menu (see THE INFORMATION MODE on page
21 to set the default menu). If necessary, press the
Home button again.
•• The incline level of the treadmill
•• The number of vertical feet you have climbed
When a wireless iFit module
is connected, the wireless
symbol at the top of the display will show the strength
of your wireless signal.
Four arcs indicate full signal
strength.
•• The speed of the walking belt
•• Your heart rate (see step 6 on page 17)
•• The matrix
The matrix offers several display tabs. Press the
increase and decrease button next to the Enter button until the desired tab is shown.
To reset the displays, press the Stop button, remove the key, and then reinsert the key.
The Incline tab will show a prole of the incline settings of the workout. A new segment will appear at
the end of each minute. The Speed tab will show a
prole of the speed settings of the workout.
16
If desired, adjust the
volume by pressing the
volume increase and
decrease buttons on
the console.
7. Turn on the fan if desired.
Increase
The fan features multiple speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Decrease
To reset the displays, press the Stop button,
remove the key, and then reinsert the key.
Press the small fan button repeatedly to select
a fan speed or to turn off
the fan. Press the large
Auto fan button to select
the auto mode or to turn
off the fan.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately. For information about the chest
heart rate monitor, see page 12.
Before using
the handgrip
heart rate monitor, remove the
sheets of plastic
from the metal
contacts. In addition, make sure
that your hands
are clean.
8. When you are nished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero percent. The incline must be at zero percent or you
may damage the treadmill when you fold it to
the storage position. Next, remove the key from
the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’’s electrical components may
wear prematurely.
Contacts
To measure your heart rate, stand on the foot
rails and hold the contacts with your palms for
approximately ten seconds; avoid moving your
hands. When your pulse is detected, your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
17
HOW TO USE AN ONBOARD WORKOUT
programmed for the next segment, the speed and/
or incline setting will ash in the display and the
treadmill will automatically adjust to the new speed
and/or incline setting.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
The workout will continue in this way until the last
segment of the prole ashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
2. Select an onboard workout.
To select an onboard workout, press the Calorie
button, the Intensity button, the Incline button, or
the Speed button repeatedly until the desired workout appears in the display.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manually change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
When you select an onboard workout, the display
will show the duration, the distance, and the name
of the workout. After a few seconds, the display will
show the maximum speed and incline settings of
the workout. In addition, a prole of the speed settings of the workout will appear in the matrix. If you
select a calorie workout, the approximate number
of calories you will burn will appear in the name of
the workout.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
3. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
rst speed and incline settings of the workout. Hold
the handrails and begin walking.
To stop the workout at any time, press the Stop
button. The time will begin to ash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecutive segments.
4. Follow your progress with the displays.
During the
workout, the
proles on the
speed and
incline tabs
Current Segment
will show your
progress. The
ashing segment of the prole represents the current segment
of the workout. The height of the ashing segment
indicates the speed or incline setting for the current
segment.
See step 5 on page 16. The display will show the
time remaining instead of the elapsed time.
5. Measure your heart rate if desired.
See step 6 on page 17.
6. Turn on the fan if desired.
See step 7 on page 17.
7. When you are nished exercising, remove the
key from the console.
At the end of each segment, a series of tones will
sound and the next segment of the prole will begin
to ash. If a different speed and/or incline setting is
See step 8 on page 17.
18
HOW TO USE A SET-A-GOAL WORKOUT
HOW TO USE AN IFIT WORKOUT
1. Insert the key into the console.
Note: To use an iFit workout, you must have an
optional iFit module. To purchase an iFit module at
any time, go to www.iFit.com or call the telephone
number on the front cover of this manual. You must
also have access to a computer with a USB port and
an internet connection. In addition, you must have
access to a wireless network including an 802.11b
router with SSID broadcast enabled (hidden networks
are not supported). An iFit.com membership is also
required.
See HOW TO TURN ON THE POWER on page 15.
2. Set a calories, distance, or time goal.
Press the Set A Goal button repeatedly until the
name of the desired goal appears in the display.
Then, press the increase and decrease buttons
next to the Enter button to set the desired goal.
1. Insert the key into the console.
3. Start the workout.
See HOW TO TURN ON THE POWER on page 15.
Press the Start button to start the workout. A
moment after you press the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
2. Insert the iFit module into the console.
To insert the iFit module, see the instructions included with the iFit module.
The workout will function in the same way as the
manual mode (see pages 15 to 17).
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in
the iFit module must be at least 8 in. (20 cm)
from all persons and must not be near or connected to any other antenna or transmitter.
The workout will continue until you reach the goal
that you set. The walking belt will then slow to a
stop.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on various factors such as
your weight.
3. Select a user.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
4. Follow your progress with the displays.
4. Select an iFit workout.
See step 5 on page 16.
To download an iFit workout in your schedule,
press the Map, Train, or Lose Wt. button to download the next workout of that type in your schedule.
5. Measure your heart rate if desired.
See step 6 on page 17.
To compete in a race that you have previously
scheduled, press the Compete button.
6. Turn on the fan if desired.
See step 7 on page 17.
To re-run a recent iFit workout from your schedule, first press the Track button. Next, press the
increase and decrease buttons to select the
desired workout. Then, press the Enter button to
start the workout.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 17.
19
For more information about the iFit workouts,
please see www.iFit.com.
7. Measure your heart rate if desired.
See step 6 on page 17.
When you select an iFit workout, the display will
show the name, duration, maximum speed setting,
and distance of the workout. The display will also
show the approximate number of calories you will
burn during the workout and a profile of the speed
settings of the workout.
8. Turn on the fan if desired.
See step 7 on page 17.
9. When you are nished exercising, remove the
key from the console.
If you select a competition workout, the display may
count down to the beginning of the race.
See step 8 on page 17.
Note: Each iFit button can also run two demo workouts. To use the demo workouts, remove the iFit
module from the console and press one of the iFit
buttons.
For more information about the iFit mode, go to
www.iFit.com.
HOW TO USE THE STEREO SOUND SYSTEM
5. Start the workout.
To play music or audio books through the console’’s
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the console through the audio jack.
See step 3 on page 18.
During some workouts, the voice of a personal
trainer will guide you through your workout. You
can select an audio setting for your personal trainer
(see THE INFORMATION MODE on page 21).
Plug one end of your audio cable into the audio jack.
Plug the other end into a jack on your MP3 player, CD
player, or other personal audio player. Make sure that
your audio cable is fully plugged in.
To stop the workout at any time, press the Stop
button. The time will begin to ash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at the speed setting for the rst segment of the workout. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
Next, press the play button
on your MP3 player, CD
player, or other personal
audio player. Adjust the volume on your personal audio
player or press the volume
increase and decrease buttons on the console.
Increase
Decrease
Audio
Jack
6. Follow your progress with the displays.
If you are using a personal CD player and the CD
skips, set the CD player on the oor or another at surface instead of on the console.
See step 5 on page 16.
The My Trail tab will show a map of the trail you
are walking or running or it will show a track and
the number of laps you complete.
During a competition workout, the Competition tab
will show your progress in the race. As you race,
the top line in the matrix will show how much of the
race you have completed. The other lines will show
your top four competitors. The end of the matrix
represents the end of the race.
20
THE INFORMATION MODE
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the matrix. To turn on or turn off
the demo mode, press the Enter button.
The console features an information mode that keeps
track of treadmill information and allows you to personalize console settings.
1. Select the information mode.
CONTRAST LVL——Press the Incline increase and
decrease buttons to adjust the contrast level of the
display.
To select the information mode, hold down the Stop
button while inserting the key into the console and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
If a module is connected, you may also select
the following screen:
The time display will show the total number of
hours that the treadmill has been used.
TRAINER VOICE——To turn on or turn off the voice
of the personal trainer, press the Enter button.
The distance display will show the total number
of miles (or kilometers) that the walking belt has
moved.
If an iFit module is connected, you may also
select the following screens:
DEFAULT MENU——The default menu will appear
when you insert the key into the console or when
you press the Home button. Press the Enter button
repeatedly to select the manual main screen or the
iFit screen as the default menu.
The lower section of the display will show the
status of an iFit module. If an iFit module is connected, the display will show the words WIFI
MODULE. If a USB module is connected, the
display will show the words USB/SD MODULE. If
no module is connected, the display will show the
words NO IFIT MODULE.
CHECK WIFI STATUS——Press the Enter button
to check the status of your iFit module. The lower
display will show the software version number, the
network SSID, the network encryption type, the
connection status, the wireless signal strength, the
IP address of the module, the number of registered
users and their names, the results of the DNS
lookup, and the status of the iFit server.
2. Select the optional screens.
While the information mode is selected, the matrix
will display several optional screens. Press the
decrease button next to the Enter button to select
each of the following screens:
SEND/RECEIVE DATA——To send and receive
workouts, workout logs, and updates, press the
Enter button. When the process is nished, the
words TRANSFERS DONE will appear in the
display.
UNITS——To change the unit of measurement, press
the Enter button. To view distance in miles, select
ENGLISH. To view distance in kilometers, select
METRIC.
DEMO——The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned
on, the console will function normally when you
plug in the power cord, press the power switch
3. Exit the information mode.
To exit the information mode, remove the key from
the console.
21
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the incline
to zero percent before you fold the treadmill.
Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20
kg) to raise, lower, or move the treadmill.
Before moving the treadmill, fold it as described at the
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1. Hold the frame rmly in the location shown by the
arrow below. CAUTION: Bend your legs and
keep your back straight.
1
1
Frame
Handrail
Frame
Wheel
2. Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
2
Frame
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 2. Hold the upper end of the treadmill frame with your right hand. Then, pull the latch
knob to the left. IMPORTANT: Do not turn the
latch knob. If necessary, push the frame forward
slightly. Pivot the frame downward a few inches,
and release the latch knob.
Latch Knob
To protect the oor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
2. See drawing 1 at the left. Hold the metal frame
rmly with both hands, and lower it to the oor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
22
TROUBLESHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
c. Remove the key from the console, and then
reinsert it.
d. If the treadmill still will not run, please see the front
cover of this manual.
SYMPTOM: The power does not turn on
SYMPTOM: The console displays remain lit when
you remove the key from the console
a. Make sure that the power cord is plugged into a
surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see
page 13). Use only a surge suppressor that meets
all of the specifications described on page 13.
IMPORTANT: The treadmill is not compatible
with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
a. The console features a display demo mode,
designed to be used if the treadmill is displayed in
a store. If the displays remain lit when you remove
the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a
few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 21 to turn off the
demo mode.
b. After the power cord has been plugged in, make
sure that the key is inserted into the console.
SYMPTOM: The displays of the console do not
function properly
c. Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
a. Remove the key from the console and UNPLUG
THE POWER CORD. Remove the ve #8 x 3/4"
Truss Head Screws (8). Carefully pivot the Motor
Hood (55) off.
c
a
Tripped
55
Reset
8
8
SYMPTOM: The power turns off during use
a. Check the power switch (see the drawing above).
If the switch has tripped, wait for five minutes and
then press the switch back in.
8
b. Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
23
Locate the Reed Switch (47) and the Magnet (46)
on the left side of the Pulley (44). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet and
the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the #8 x 3/4" Tek Screw (7), move
the Reed Switch slightly, and then retighten the
Screw. Reattach the Motor Hood (not shown) with
the ve #8 x 3/4" Truss Head Screws (not shown)
and run the treadmill for a few minutes to check for
a correct speed reading.
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
Top
View
b
47
44
7
1/8 in.
46
2––3 in.
Idler Roller Screws
SYMPTOM: The incline of the treadmill does not
change correctly
a. Hold down the Stop button and the Speed increase
button, insert the key into the console, and then
release the Stop button and the Speed increase
button. Press the Stop button and then press the
Incline increase or decrease button. The treadmill will automatically rise to the maximum incline
level and then return to the minimum level. This will
recalibrate the incline system. If the incline does not
begin calibrating, press the Stop button again, and
then press the Incline increase or decrease button
again. When the incline is calibrated, remove the
key from the console.
c. Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to
the walking belt or the walking platform unless
instructed to do so by an authorized service
representative. Such substances may deteriorate the walking belt and cause excessive wear.
If you suspect that the walking belt needs more
lubricant, see the front cover of this manual.
d. If the walking belt still slows when walked on, see
the front cover of this manual.
SYMPTOM: The walking belt slows when walked on
a. Use only a surge suppressor that meets all of the
specications described on page 13.
24
SYMPTOM: The walking belt is off-center or slips
when walked on
b. If the walking belt slips when walked on, rst
remove the key and UNPLUG THE POWER
CORD. Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Then, plug in the power
cord, insert the key, and carefully walk on the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
a. If the walking belt is off-center, rst remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
b
a
SYMPTOM: The console display has lines running
through it
a. If lines appear in the console display, see THE
INFORMATION MODE on page 21 and adjust the
contrast level of the display.
25
EXERCISE GUIDELINES
Burning Fat——To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise——If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up——Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise——Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise; never hold your breath.
Cooling Down——Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your ““training zone.”” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
26
PART LIST
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
94
8
4
1
4
2
21
11
12
2
6
2
1
1
4
2
7
4
2
2
4
1
2
1
1
4
6
4
2
7
4
6
12
6
6
1
1
1
1
1
2
2
1
1
1
1
1
4
1
1
1
Model No. 831.24922.0 R0912A
Description
Key No. Qty.
#8 x 3/4" Screw
5/16" x 1" Screw
5/16" x 1 1/2" Screw
3/8" x 1 3/4" Bolt
5/16" Star Washer
3/8" Nut
#8 x 3/4" Tek Screw
#8 x 3/4" Truss Head Screw
#8 x 3/4" Tek Pan Head Screw
#8 x 1 3/4" Screw
#10 x 1/2" Screw
1/4" x 2 1/2" Screw
3/8" x 1 1/2" Hex Head Bolt
3/8" x 2" Bolt
#6 x 1/4" Screw
3/8" x 1 1/2" Bolt
#8 x 1/2" Machine Screw
#8 Belt Guide Screw
5/16" Drive Motor Screw
1/2" x 2 1/4" Bolt
5/16" x 1 3/4" Bolt
1/4" x 1 3/4" Screw
3/8" x 1" Bolt
3/8" x 2" Bolt
1/4" Star Washer
5/16" Flat Washer
3/8" Jam Nut
5/16" Jam Nut
1/2" Jam Nut
Clip
Rubber Cushion
#8 x 1 1/4" Screw
Cushion Top/Bottom
Cushion
Cushion Spring
Left Foot Rail
Idler Roller
Walking Platform
Waring Decal
Right Foor Rail
Frame Cover
Belt Guide
Reed Switch Clip
Drive Roller/Pulley
Walking Belt
Magnet
Reed Switch
Cable Tie
Storage Latch
Drive Motor
Motor Belt
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
*
1
1
1
1
1
2
2
1
1
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
6
3
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7
1
2
––
Description
Frame
Right Rear Foot
Left Rear Foot
Motor Hood
Hood Accent
Incline Frame Spacer
Frame Spacer
Incline Frame
Incline Motor
Incline Motor Spacer
Controller
Frame Endcap
Frame Endcap Cover
Electronics Plate
Hood Post
Power Cord Grommet
Power Cord
Power Switch
Belly Pan
Left Handrail Cover
Left Handrail Frame
Upright
Left Handrail Bottom
Right Handrail Cover
Right Handrail Frame
Right Handrail Bottom
Upright Wire
Grommet
Base Pad
Caution Decal
Left Upright Cover
Right Upright Cover
Wheel
Left Base Leg
Right Base Leg
Console Base
Console
Top Console Back
Chest Strap
Sensor
Key/Clip
Pulse Bar
Pulse Bar Bottom
Ground Wire
Console Frame
Fan Housing
Fan
Wire Tie
Console Back
#8 x 1/2" Screw
User’’s Manual
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
27
12
33
32
35
34
33
1
28
31
26
28
21
37
36
33
32
35
34
33
1
38
9
7
54
39
33
32
35
34
33
1
12
40
8
53
52
21
7
32
7
41
8
9
1
6
42
31
26
28
7
26
28
8
18
8
32
7
31
4
33
35
34
33
1
8
20
21
34
35
33
41
43
7
7
7
33
1
46
44
8
51
34
35
33
8
32
45
47
10
17
33
18
7
48
8
21
49
42
19
50
6
31
26
28
22
25
24
10
20
17
EXPLODED DRAWING A
Model No. 831.24922.0 R0912A
EXPLODED DRAWING B
Model No. 831.24922.0 R0912A
8
8
8
55
56
14
57
58
13
59
63
17
27
60
23
23
29
27
57
62
61
29
1
9
58
1
11
1
65
9
68
1
1
1
11
64
67
66
17
1
11
11
30
1
30
66
11
1
9
69
9
30
70
9
29
EXPLODED DRAWING C
Model No. 831.24922.0 R0912A
30
30
1
1
74
75
1
71
78
1
1
76
1
72
1
77
73
1
1
1
1
1
81
82
79
27
2
81
80
17
7
85
16
80
7
2
80
84
78
27
7
27
81
80
83
7
80
86
27
84
80
7
16
30
7
EXPLODED DRAWING D
Model No. 831.24922.0 R0912A
1
89
90
1
1
91
1
88
87
1
92
1
93
1
30
1
94
1
1
96
1
1
1
1
1
97
3
30
1
98
1
95
1
1
17
2
5
1
15
1
99
12
1
1
1
1
15
1
1
1
1
3
1
2
1
1
12
1
5
1
101
99
100
1
1
1
1
1
1
1
1
31
101
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
•• the model number and serial number of the product (see the front cover of this manual)
•• the name of the product (see the front cover of this manual)
•• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING
near the end of this manual)
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.nordictrackservice.com/registration.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame, drive motor, and walking platform are warranted for a lifetime. Parts and electronics are warranted for ve (5) years from the date of purchase. Labor
is warranted for two (2) years from the date of purchase.
This warranty extends only to the original purchaser (customer). ICON’’s obligation under this warranty is
limited to repairing or replacing, at ICON’’s option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’’s responsibility. If
replacement parts are shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to freight damage to the product. This warranty will automatically be voided
if the product is used as a store display model, if the product is purchased or transported outside the USA,
if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes. No other warranty beyond that specically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or prots, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or tness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specic legal rights; the customer may have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 335072 R0912A
Printed in USA © 2012 ICON IP, Inc.
Download PDF