tp-link tp-link TX201 2.5 Gigabit PCIe Network Adapter User Guide

Add to My manuals
5 Pages

advertisement

tp-link tp-link TX201 2.5 Gigabit PCIe Network Adapter User Guide | Manualzz
User Manual For Ethernet Cable
1、确认设备对应的网络接口必须与cable connector匹配
1、Confirming the network interface of device must be compatible with the cable
connector
network interface should be compatible with connector
2、必须将连接器完全插入网络接口,对应的卡扣卡住网络接口的卡槽
2、The connector must be fully inserted into the network interface, and the
corresponding buckle is stuck in the slot of the network interface
OK: contacting completely
NG: contacting partly
3、如果Cable存在不工作的状况,请简易的进行如下检查:
3、If the cable do not work, Please simply check as follow:
3.1 确认Cable两端连接器是否对插到位,不可存在松动现象
3.1 Confirming whether both connector of cable were inserted into corresponding
interface completely, and should be no loose phenomenon
3.2 确认Cable两端连接器及Device 接口内是否存在粉尘或其他杂质,请清洁干净
后重新连接
3.2 Confirming whether there is any dust or other foreign matter in cable connector or
device port, Please clean it and reconnect.
3.3 网线连接OK后再次确认信号输入端与接收端是否有数据传输
3.3 After the network connection is OK, confirm again whether there is data
transmission between the signal input end and the receiving end

advertisement

Related manuals

advertisement