The IR-2400 includes these items:
1
2-Piece
IR Receiver
0.65”
g.
Si d.
GnV
+
IR receiver head
0.35”
IR-2400
USERS GUIDE
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or
rebuilt parts, free of charge in the USA, for one year from the date of original
purchase. This is a no hassle warranty with no mail in warranty card needed.
This warranty does not cover damages in shipment, failures caused by other
products not supplied by Channel Vision Technology, or failures due to
accident, misuse, abuse, or alteration of the equipment. This warranty is
extended only to the original purchaser, and a purchase receipt, invoice, or
other proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling (800)
840-0288 toll free. A Return Authorization number must be obtained in
advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights
(which vary from state to state). If a problem with this product develops
during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life
sustaining or critical environment applications. Channel Vision customers
using or selling Channel Vision products for use in such applications do so at
their own risk and agree to fully indemnify Channel Vision for any damages
resulting from such improper use or sale.
1 - IR receiver holster
”
36
ire
CAUTION: DO NOT attempt to cut or extend this
wire. Doing so will prevent the unit from working.
w
wn
ro
+V
=b
1 - hole mount
Features:
! Plasma Proof IR receiver
! Status LEDs for IR signal indication
! Versatile mounting accessaries: Install as
Very small receiver
In-cabinet tube type receiver
Unobtrusive desktop type receiver
500-153 rev C
1 - tabletop mount
How IR repeating works
The IR receiver is wired to
the IR hub which routes the
signal to IR emitters
Point an
IR remote control
at the IR receiver
ion
pans
Directivity of IR Sensor
IR receiver wire pinout
The effective receive distance of all IR receivers changes
when the IR remote control is not directly in front of the IR
sensor.
Ex
bal
r Glo
Pw
IR
el
Mod205
P-1
r
ive
ce
Re
End view
ribbon cable
Zone
AN
3
2
NE
6
1
L
5
4
TM
C H IS IO N
V
9
8
7
er
0
Pow
bal
Glo
rs
itte
Em
IR
ver
cei
Re
Zone
DC
+12 mA
250
And the emitter CD player
repeats the IR signal
in the other room.
Be sure the emitter is attached directly over the component’s IR receiver.
To locate the IR receiver, shine a flashlight into the unit and look for the
sensor.
Specifications: (typical)
Voltage Requirements:
8 - 12 VDC
IR Freq. range supported:
30 kHz - 60 kHz
IR pickup range:
40 ft. @ 38kHz, 25 ft. @ 56kHz
IR receiver head dimensions: 0.65” x 0.35” x 0.25”
Color:
Black
Specifications subject to change without notice.
The graph below describes the performance of the IR sensor
device used in this Channel Vision IR receiver. Please note
that the graph below marks the distance as a percentage of
the maximum distance. So at 0º, the distance is 1.0 (or 100%)
and at 30º, the distance is 0.7 (or 70%) and so on.
Actual transmission distances are dependent upon frequency
of remote control (40kHz has max range) and luminosity of
remote control (i.e. Some remotes are brighter than others.)
0º
Under ideal conditions,
ranges of >40 feet are
possible.
10º
20º
Typical IR receiver
connections (ref only)
30º
40º
1.0
0.9
50º
0.8
60º
+V
(white dash or brown wire)
70º
0.7
80º
0.6
0.6
0.4
0.2
0
0.2
0.4
drel – Relative Transmission Distance
https://manual-hub.com/
Sig
Tip
Gnd
Collar
+V
Ring
Using the IR-2400 with the P-1205
Mounting the IR receiver: Option 1 - Using the holster
6
9
0
8
7
Power
3
2
5
1
4
Mount the IR receiver to the TV or on a surface within line of sight
of your remote control.
Expansion
Remove the backing from the tape and attach the
IR receiver holster in the desired location.
bal Zone
Pwr Glo
ceiver
IR Re
Model
P-1205
NEL
CHAN
V I S IO N
TM
Global
IR
Receiver
rs
Emitte
Note: Match the Signal,
Ground, and +Voltage
terminals on the IR-2400
with the corresponding
terminals on the P-1205
+12DC
Zone
Sat radio
DVD player
CD player
The IR-2400 can be directly connected
to the P-1205 in two different ways:
1) Through the 3.5mm jack
2) Through the screw terminal connector
Snap IR receiver head into the holster
as shown.
For larger systems, a parallel connecting
block such as the C-1201(not shown)
can be used to connect several IR
receivers to the IR input of the P-1205.
Receiver
Mounting the IR receiver: Option 2 - Using the hole mount
Mounting the IR receiver: Option 3 - Using the tabletop mount
Push the IR receiver head
through the hole in the
tabletop mount.
Drill a 3/4” hole.
Push the IR receiver head
through the hole.
Insert the IR receiver head
into the IR receiver hole mount.
Insert the IR receiver head
into the IR receiver hole mount.
To secure the mount, remove
the backing from the foam tape
on the bottom of the unit and
attach the mount to any flat surface.
Push the IR receiver hole
mount and IR receiver head
back into the hole in the tabletop
mount.
Push the IR receiver hole
mount and IR receiver head
back into the hole.
https://manual-hub.com/
">