PP004-V1.0 EN
Automatic Pet Feeder
User Manual
Hardware installation and introduction
Open the battery compartment at the bottom of the feeder, insert
the Micro USB power cord into the connector on the bottom, and
extend the power cord out along the designed wire guide. You could
also put in 3 pieces of D cell batteries, so that the feeder can still
work automatically according to your scheduled feeding plan even
without external power supply. Turn on the power switch.
Power
switch
Rotate the knob on the top cover, the feeding tray is in the grain
bucket. Then place the feeding tray into the feeder from the front.
OFF
ON
For your pet's health, please wash the grain bucket and feeding tray
regularly. The feeder body should not be filled with water. Please use
a wring-able wet cloth to wipe.
Attention the following operation panel introduction:
LCD screen
Indicator
Microphone
Buzzer
Up
Recording
Settings
Return/Cancel
Confirm
Down
Note:
Due to the wide variety of pet foods on the market, the mechanical
structure of the feeder could not guarantee 100% fit all the types of
pet food. We recommend to use only dry pet food size within 5mm to
15mm. Wet food and damp food are strictly prohibited from being
placed in the feeder.
Time settings
The automatic feeding depends on the correct clock settings in the
pet feeder. Please set the clock before setting up feeding plan.
Long press the
setting button for 2 seconds, the icons start to be
flashing, it is in settings mode. As shown in Fig1, the clock icon is
flashing in default to ready to set up clock.
Press
button to confirm to enter the time setting. The hour is
flashing as shown in Fig2. Use the up/down selection buttons to set
the hour (Time 24-hour clock) as shown in Fig3. You can long press
the up/down selection button for fast setting.
Press
to confirm the hour. Then the minute start to flash, press
the up/down selection button for minute setting, as shown in Fig4.
Then press
to save and return to settings mode. Press
Back/Cancel button to exit or go on to set up other settings.
1
2
3
4
Tips:
All operations during the setup process can be returned or canceled
via the
Back/Cancel button.
The signs/numbers shown in screenshots enclosed by the dotted line
represent the actual icon/number in the operation screen
Manual feeding
The feeder supports fast manual feeding and a scheduled number of
manual feeding functions. In the standby state, you can quickly feed 1
portion by quickly pressing down button twice within 1 second.
Feed right now for multiple portions:
Long press
button for 2 seconds to enter the setting mode.
Press down button to switch the flashing icon to the feeding one as
shown in Fig5.
Press
to confirm and manual choose the feeding portions. You
can use the up/down selections button to choose, as shown in Fig6.
5
6
Press
to start feeding. Meanwhile, the operation screen will
display the exact remaining portions need to feed as shown in Fig7.
7
Scheduled feeding
The pet feeder support the scheduled feeding exact portions at exact
time. The feeder supports up to 6 meals per day.
Press
button for 2 seconds, enter the setting mode.
Press down button to switch the flashing icon to Digital 1 icon. As
show in Fig8.
Press
to select the feeding portions, press up/down button to
set portions as shown in Fig9 and Fig10.
Press
to go for feeding time setting as shown in Fig11 and Fig12,
Press
to save. Press
Back/Cancel button to exit and the
auto feeding icon will show at standby state, as shown in Fig13.
8
9
10
11
12
13
If you need a automatic feeding for multiple meals, please repeat the
above steps and select the corresponding Digital number icon
according to the meals in the setting interface as shown in Fig14.
14
15
To cancel a certain automatic feeding, you can set the feeding
portions to be 0. Then second feeding was cancelled as shown in
Fig16 and Fig17.
16
17
Feeding voice recording
To develop the good feeding habits for pets, the feeder supports
pre-recording a maximum of 10 seconds of audio, which is played
during feeding.
In standby state, press and hold the
record button for 3 seconds
until the feeder makes a “Drip” sound, and you can start recording at
the microphone position. Note that the recording button should
always be pressed continually 10 seconds during recording. After the
recording is completed. the feeder will make two “Drip” sound.
After recording done, you can preview the recorded audio by short
pressing the
record button. If you need to change the recording,
please re-record it. The closer to the microphone, the louder voice
can be recorded.
The default of voice recording playback is 3 times. It can be
customized 5 times max at the setting：
Press and hold the setting button
setting mode.
for 2 seconds to enter the
Select the down button to switch the flashing icon to recording
button as shown in Fig18.
Press
to confirm play times of recording playback by using the
up/down buttons as shown in Fig19. Press
button to save.
To cancel the feeding recording and playback, You can set the number
of playback to 0.
18
19
Import Notice:
When pet feeder connects by power adapter regularly, the pet feeder
recording will be played during feeding. It will play the times as
setting, ex.3times/4times/5times... even the feeder finish feeding.
When pet food blocked at the food tray, the pet feeder will stop feed
and wait for pets for 10 minutes. The voice recording will be played 1
time per minute to call the pets. If pets finished the food at the tray,
the pet feeder will work as scheduled feeding plan. Otherwise it will
stop feeding if the pets still didn't finish feeding after 10 minutes. The
feeder could not be operate before feeding stopped.
When external power cut, the pet feeder will work by battery which
you have installed previously to pet feeders. The feeding voice
recording will be played only 1 time before feeding to pets. It will not
played during feeding to pets. This is to save the battery energy for
pet feeder to keep working further.
Feeder Alarm
When the battery is low, the screen will be displayed low battery sign
as shown in Fig20. When the food is insufficient, the screen will
display the low food storage as shown in Fig21; When these two
cases happened, the indicator light will be in a red breathing state.
After renewing the battery or re-filling enough food, the red indicator
and screen icons will disappear automatically within 60 seconds.
20
21
When the pet food has been totally fed, the screen will display the
alarm message as shown Fig22, and indicator will turn to red-flashing
color. After you spooned the enough pet food to food bucket, the
flashing red light will be disappeared within 60 seconds.
When the food is to stuck in food bucket, the screen will display the
red-flashing lights as shown Fig23. Please clean up the stuck food
manually, then turn the power switch off and back on.
22
23
Others
Whenever the pet feeder released any of red indicator light, it means
that the feeder has a notification message. Please follow the screen
signs remind and cope with them in time according to manual book
illustrated.
The back-up battery is designed for short-term alternative when the
external power supply is cut. Attention！When the pet feeder works
with battery back-up, it will go to sleep mode and some of functions
will be limited:
1) There will be up to 60 seconds delay for the screen display and
scheduled time feeding.
2) The feeding voice recording only play 1 time before feeding;
3) The indicator light of the feeder is only on every 30~60 seconds to
remind, it will not be on continuously;
4) For any operations when the screen is off, press any button to
wake up the pet feeder from sleep mode first.
Reset to factory default:
If want to delete all previous setting, you can reset the feeder to
factory default. In the standby state, press and hold the setting
button and
button at the same time for 3 seconds until the
feeder makes a short beep.
">
