https://manual-hub.com/
1. The liquid or steam must not be directed towards equipment containing electrical
components, such as the interior of ovens.
2. Unplug the appliance after use and before carrying out user maintenance on the
appliance.
3. If the supply cord is damaged, it must be replaced by a Kogan customer service
technician in order to avoid a hazard.
4. The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
Disposal
Do not dispose of electrical appliances as unsorted municipal waste - use
separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are disposed
of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being.
2
https://manual-hub.com/
CONTENTS
IMPORTANT SAFEGUARDS ------------------------------------------------------------3-5
KEY FEATURES ------------------------------------------------------------------------------6
ACCESSORIES -------------------------------------------------------------------------------7
HOW TO ASSEMBLE THE STEAM MOP X5 UNIT --------------------------------8-9
HOW TO USE THE STEAM MOP X5 UNIT ----------------------------------------10-14
HAND-HELD STEAMER -------------------------------------------------------------------15
HOW TO ASSEMBLE THE HAND-HELD STEAMER ----------------------------15-16
HOW TO ASSEMBLE THE OPTIONAL ACCESSORIES -----------------------17-18
HOW TO USE THE HAND-HELD STEAMER --------------------------------------19-20
HOW TO USE THE OPTIONAL ACCESSORIES ---------------------------------21-26
AFTER USE -----------------------------------------------------------------------------------27
CLEANINING AND MAINTENANCE --------------------------------------------------28-30
How to decalcify the Water Tank interior
● Cleaning procedure to remove lime scale
By using scraper
By using cleaning solution
● Cleaning blocked steamer accessories.
TROUBLE SHOOTING GUIDE ----------------------------------------------------------31
3
https://manual-hub.com/
IMPORTANT SAFEGUARDS
PLEASE
READ
CAREFULLY.
FAILURE
TO
FOLLOW
THE
PRODUCT
INSTRUCTIONS WILL VOID YOUR WARRANTY. READ ALL INSTRUCTIONS
BEFORE USING THIS STEAM CLEANER.
As with any electric appliance, basic precautions should always be observed when using
this product, including the following:
1. Verify that the main voltage indicated on the product corresponds with the
voltage of your electrical outlet. Rated voltage: 110-120V, 60HZ, 1300W or 220240V, 50/60HZ, 1300W
2. To provide continued protection against risk of electric shock, only connect to properly
grounded outlets.
3. This product is designed for domestic use only.
4. Do not use outdoors.
5. Do not leave the STEAM MOP unattended while plugged in. Unplug the electrical
cord when not in use and before servicing.
6. Do not allow the STEAM MOP to be used as a toy. Young children should be
supervised to ensure that they do not play with the appliance.
Close attention is necessary when used near children, pets or plants.
7. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they are under supervision have been instructed how to use the appliance by a person
responsible for their safety.
8. Never direct steam towards people, animals or plants.
9. Do not immerse the STEAM MOP in water or other liquids.
4
https://manual-hub.com/
10. Do not use with damaged cord or plug. If the STEAM MOP is not working as it
should, has been dropped, damaged, left outdoors, or immersed in water, return it to
Kogan. If the supply cord is damaged, it must be replaced by a Kogan customer
service technician to avoid hazard.
11. Do not pull or carry the unit by the cord, use the cord as a handle, close a door on the
cord, or pull the cord around sharp edges or corners. Keep the cord away from heated
surfaces.
12. Never force the plug into an outlet.
13. Do not use telescopic cords or outlets with inadequate electrical current carrying
capacity.
14. Unplug after each use. To safely unplug, grasp the plug and gently pull, do not unplug
by pulling on the cord.
15. Do not handle the plug or the STEAM MOP with wet hands or operate without shoes.
16. Do not insert any objects into openings in the unit. Do not use with any opening of the
product blocked.
17. Do not use the Mop Head without a floor cloth in place.
18. Do not use without water in the Water Tank.
19. Use extra caution when using on stairs.
20. Store your STEAM MOP indoors in a cool, dry place.
21. Keep your work area well-lit.
22. Never put hot water or any other liquids such as aromatic, alcohol-based, or
detergent products into the STEAM MOP Water Tank. This will make the operation
unsafe and damage the unit.
23. Always keep the output for the steam clear. Avoid placing the steam opening on soft
surfaces which may block the flow of steam. Keep the openings free from lint, hair and
other potential obstructions to ensure proper steam flow.
24. Use only as directed in this manual. Use recommended accessories only.
25. Use of attachments not provide or sold by the manufacturer or authorized resellers
may cause fire, electric shock or injury.
26. The liquid or steam should not be directed towards equipment containing electrical
components, such as the interior of ovens.
27. Do not expose to rain.
5
https://manual-hub.com/
28. Stop using the STEAM MOP if you observe water leakage, and contact the
Kogan Customer support team.
29. Do not use the STEAM MOP in enclosed spaces that are filled with flammable,
explosive or toxic vapor such as paint thinner or oil-based paint.
30. Do not use on leather, wax polished furniture or floors, unsealed hardwood or parquet
floors, synthetic fabrics, velvet or other delicate steam-sensitive materials.
31. Do not use for space heating purposes.
32. Unplug appliance from outlet before servicing.
33. Do not touch hot surfaces.
34. Do not place on or near a hot gas or electric burner, or in a heated oven.
35. To disconnect the unit, turn the power Switch (O/I) to the “OFF” position, turn off the
steam regulator, then remove plug from wall outlet.
36. Do not use appliance for anything other than its intended use.
37. Care should be taken when using appliance due to emission of steam.
38. To avoid circuit overload, do not operate another appliance on the same socket
(circuit) as the steam cleaner.
DANGER OF SCALDING
HOUSEHOLD USE ONLY
Commercial use of this unit voids the manufacturer’s warranty.
SAVE THESE INSTRUCTIONS
\\
6
https://manual-hub.com/
KEY FEATURES
Curved Handle
Upper Cord Wrap
Power Supply Cord
Telescopic Handle
Handle Lock Button
Power Switch(O/I) with LED ON/OFF Light
Steam Regulator
Water Tank Cap
Water Tank
Main Body
Lock Button (on Main Body)
Mop Head
Front View
Back View
ACCESSORIES
Glider
Microfiber Cloth
Measuring Cup
Jet Nozzle
Round Brush (Brass)
Cleaning Pin
Round Brush (Nylon)
7
https://manual-hub.com/
OPTIONAL ACCESSORIES
Window Cleaning Cloth
Garment steaming Cloth
Cloth
Telescopic Hose
for the Hand-Held Steamer
Duster
Window Cleaning Tool
8
https://manual-hub.com/
HOW TO ASSEMBLE THE STEAM MOP
Please make sure that the unit is unplugged from an electrical outlet and the Power
Switch (O/I) is in the “OFF”(O) position before assembling the unit or changing the
accessories.
Attach the Mop head to the Main Body
as follows: insert the Swivel Joint into
designated hole in the Main Body until
it locks in place with the Lock Button on
the Main Body (you will hear a clicking
sound).
Make sure that the Mop Head is
securely locked into place before usage.
Insert the Stretch Handle into the
designated opening in the Main Body
until it gets locked in place with the
Telescopic Handle Lock Button.
9
https://manual-hub.com/
Place the Microfiber Cloth Pad onto
the mop head. Fasten the Microfiber Cloth
Pad by pulling the cord while pressing on
the toggle.
When using the STEAM MOP
on carpet surfaces: Place the Mop Head,
with Microfiber Cloth in place, on top of
the carpet glider as illustrated. Do
not attempt to use the STEAM MOP unit
on carpet/rug surfaces without the carpet
glider in place.
Never use the carpet glider on surfaces that are prone to scratching.
Never assemble or remove the accessories while the unit is in operation.
10
https://manual-hub.com/
HOW TO USE THE STEAM MOP
PLEASE READ BEFORE USE
The STEAM MOP is designed to thoroughly clean floor surfaces, such as marble,
ceramic, carpet, stone, linoleum and sealed hardwood floors and parquet. Not all floor
types are suitable for steam cleaning.
The heat and steam action may remove the wax on surfaces treated with wax. Do not
use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an
extended period of time. This could cause the wood grain to rise, in addition to other
types of damage.
When using on vinyl, linoleum or any other heat sensitive floors, use extra caution.
Too much heat can melt glue within flooring. Use only on laminated flooring that has been
laid professionally and without any gaps or cracks that would permit the entry of moisture.
Test the STEAM MOP on a small isolated area of your flooring prior to overall use on any
floor surface.
Always check the use and care instructions of your flooring manufacturer or distributor
before using the STEAM MOP. When in doubt, please consult a flooring specialist. Only
use the carpet glider on carpeting and rugs, Use of the carpet glider on other floor
surfaces will cause streaking and possibly scratching.
This product emits steam and creates moisture. Water marks, discoloration or
damage to the floor surface can occur if the unit is left operating too long in one
place.
11
https://manual-hub.com/
1) Fill the Water Tank with water:
Make sure that the STEAM MOP is unplugged.
Turn the Water Tank cap counter-clockwise approximately 90° to the “OPEN”
position and remove the cap as illustrated in Fig.1 a,b and c.
Hold the Mop at a 45°angle as illustrated in Fig.1d. Add water in the tank up To the MAX
level by using the measuring cup. Do not overfill. The maximum tank capacity is
400ML/13.5OZ.
12
https://manual-hub.com/
Replace the Water Tank cap and
turn clockwise approximately
90° to the “CLOSE” position
until the cap is tightened
securely.
The STEAM MOP uses tap
water. However, in areas
with hard water, distilled
water should be used for better performance.
Make sure the Copper Cone inside the Water Tank is always
submerged in water (As illustrated in Fig.1i) while operating
The STEAM MOP.
Never put cleaning detergents or scented products in to the STEAM MOP.
This will make operation unsafe and damage the unit.
2) Select one of the following Steam Regulator position s:
1-Low, 2-Medium, 3-High and 4-Hot Spray
● 1 - Low and 2-Medium Setting: Ideal for clearing
All hard floors, such as linoleum, ceramic,
marble, wood, etc.
● 3 - High Setting: ideally for cleaning carpets and rugs.
● 4 - High Spray Setting: Ideal for cleaning bathroom,
kitchens, window sills, etc.
You can change the Steam Regulator position and change the steam output while
operating the STEAM MOP.
13
https://manual-hub.com/
3) Turning on The Steam Mop
Once the unit has been fully assembled and filled with water, plug in the Power
Cord to a grounded electrical outlet. Make sure the Power Switch (O/ I) is in the OFF (O)
position. Once plugged in, turn the Power Switch (O/ I) to the ON (I) position.
After approximately 30 seconds, the steam regulator will turn on. Adjust the steam
according to your requirement. The Mop will start emitting steam.
To stop emitting steam, turns off the steam regulator and then turns the
Power Switch (O/ I) to the OFF (O) position.
If the Power Switch (O/ I) turns to the ON (I)
position, and then turn on the steam
regulator earlier than 30 seconds,
water from the previous use will not be
heated and will be forced out by steam.
This may also happened you just turn off
the Power Switch to the OFF(O) position
and left the steam regulator on from the
previous use and the unit was disconnected
by unplugging only. Make sure you turn the
unit totally OFF after each usage and then
disconnect from the electrical outlet so the unit is in the totally OFF when used next time.
4) Cleaning surfaces
Slowly pass over the surface to be cleaned. The absorbent mop cloth picks up the dirt
loosened by the steam. Apply steam liberally. Keep a towel handy and wipe away any
excess water that may accumulate.
When the STEAM MOP stops emitting steam, simply turn OFF and unplug the appliance,
refill the Water Tank and continue cleaning.
14
https://manual-hub.com/
Never leave the STEAM MOP unattended while plugged in.
For Best Results:
1) Sweep/vacuum floor prior to using the STEAM MOP.
2) The Microfiber Cloth must be clean and dry for use. To
replace the cleaning cloth, proceed as follows:
Let the cleaning cloth cool down, remove cloth from unit,
replace with a new Microfiber Cloth (Optional Item) and
continue use. Select low steam regulator position.
3) To sanitize an area of your floor, leave the STEAM MOP
at high steam setting over the steam area for about
10 seconds, but no longer than 15 seconds.
Do not carry out this procedure on heat and steam sensitive floors.
● Never use steam in the one spot for too long. This can cause floor surface damage.
● Do not put hands or feet under the steam mop. The unit becomes very hot.
● During use, a pulsing noise may be heard indicating that the mop is producing
steam. This noise is normal.
● There may be some minor “spitting” of water mixed with the steam. This is also
normal.
● The force and heat of the steam may adversely affect certain materials. Always
check the suitability of using the steam mop on a surface by carrying out a
preliminary test on a hidden area.
The factory and its affiliated companies assume no liability for personal injury or
property damage resulting from the misuse of the STEAM MOP, including the
failure to comply with instructions contained in this User Guide or provided by the
manufacturer or distributor of the treated surface.
15
https://manual-hub.com/
HAND-HELD STEAMER
The Hand-Held Steamer is an ideal portable cleaner for use on work surfaces,
countertops, sinks, windows, mirrors, tiles and spot cleaning on floors, carpets and rugs.
Use it with the Jet Nozzle, Brass brush or Nylon brush attachments to spray away dirt,
grease, mold and more.
HOW TO ASSEMBLE HAND-HELD STEAMER
Make sure that the STEAM MOP
is unplugged before assembly.
1) Remove the Power Supply Cord
from the upper cord wrap.
2) Press the Telescopic Handle
lock button and remove the
Telescopic Handle and the Curved
Handle from the Main Body.
3) Press the Lock on Main Body
and remove the Mop Head.
16
https://manual-hub.com/
4) To attach the Jet Nozzle:
Insert the Jet Nozzle into the
designated hole in the Main
Body unit it locks in place with
the Lock Button on the Main
Body (you will hear a clicking
sound)
Make sure that the Jet
Nozzle is securely locked
in place before usage.
5) Attach either the round nylon brush or round copper brush by screwing onto the
threaded end of the Jet Nozzle. To remove either round brush, unscrew from the Jet
Nozzle.
● The round nylon brush is great for cleaning smooth hard surfaces, such as toilets,
sinks, and kitchen counters, etc.
● The round copper brush is great for cleaning coarse or metal surfaces, such as
brick floors, Car wheels, metal doors, and metal frames, etc.
● Both brushes can also effectively clean the grease on pans, stoves and ovens in the
kitchen. They can be used with soap or detergent to clean dirty areas.
Never use the round brass brush on surfaces that are prone to scratching.
17
https://manual-hub.com/
HOW TO ASSEMBLE THE OPTIONAL ACCESSORIES
HAND-HELD STEAMING HOUSE TOOL
Remove the Mop Head by pressing the Lock
Button on the Main Body or remove the Jet
Nozzle Following the same procedure.
Insert the designated end of the
Telescopic Hose into the designated
hole in the Main Unit locks in
place with the Lock Button on the Main
Body (you will hear a clicking sound)
Make sure that the Telescopic Hose is securely locked into place before usage.
WINDOW CLEANING TOOL
Loosen up the drawstring on the Coral cloth and install the Coral Cloth onto the
designated hooks on the Window Cleaning Tool Frame. Pull up the drawstring to
secure the Coral Cloth in place. NOTE: Do not cover the squeegee blade. Make sure
to attach the Coral Cloth to all hooks on the Cleaning Tool Frame to prevent slipping
or falling from the frame during use.
18
https://manual-hub.com/
Attach the Window Cleaning Tool to the Telescopic Hose as follows:
Align the lock button on the Telescopic Hose with the designated hole on the Window
Cleaning Tool Frame and then push in the Telescopic Hose until it locks in place.
GARMENT STEAMING TOOL
To use the Window Cleaning tool as Garment Steamer, install the Microfiber Cloth
(Garment Steaming cloth) over the Window Cleaning/Garment Steamer Tool.
Attach the Window Cleaning/Garment
Steamer Tool to the Telescopic Hose as
follows: Align the lock button on
the Telescopic Hose with the designed
hole on the Window Cleaning/Garment
Steaming Tool Frame and then push the
Telescopic Hose until it locks in place.
DUSTER
Install the cleaning Coral Cloth onto the Duster Frame.
19
https://manual-hub.com/
Attach the Duster Frame to the
Telescopic Hose as follows: Align the
lock button on the Telescopic Hose
with the designated hole on the Duster
Frame. Then push in the Telescopic
House until it locks into place.
Align the lock button on the Telescopic Hose
HOW TO USE HAND-HELD STEAMER
Make sure that the STEAM MOP is unplugged.
Fill the Water Tank with water. Please refer to the
“HOW TO USE THE STEAM MOP” section in this
manual. Attach either the round nylon brush or the
round copper brush as explained in the “HOW to
assemble Hand-Held Steamer” section in this manual.
1) Select one of the following Steam Regulator
positions: 1- Low, 2- Medium, 3- High or
4- Hot Spray. You can change the Steam
Regulator position and the steam output while
operating the STEAM MOP.
2) Once the unit has been fully assembled and filled with water, plug in the
power cord to a grounded electrical outlet. Power Switch (O/ I) is in
the OFF (O) position, turns the Power Switch (O/ I) to the ON(I) position.
After approximately 30 seconds, turn on the steam regulator and adjust
the steam according to your requirement. The Mop will start emitting steam.
To stop emitting steam, turn off the steam regulator and then turn the
Power Switch (O/ I) to the OFF (O) position.
20
https://manual-hub.com/
Note: be sure to turn the unit totally OFF after each usage and then disconnect from the
electrical outlet so the unit is in the totally OFF when used next time.
3) Slowly pass over surfaces to be cleaned. Apply steam liberally. Keep a towel handy
and wipe away any excess water that may accumulate.
4) When the Hand-Held Steamer stops emitting steam, simply turn OFF and unplug
the unit, refill the Water Tank and continue cleaning.
To sanitize your work surfaces, kitchen counter tops, sinks, bathrooms, etc. use the
Hand-Held Steamer over the same area for about 15 seconds.
Do not carry out this procedure on heat and steam sensitive surfaces. The force and heat
of the steam may adversely affect certain materials. Always check the suitability of using
the steamer on a particular surface by first testing a hidden area.
Never direct steam towards people, animals or plants.
● Do not use the steam to clean frozen windows.
● Be careful when using the steamer on glass, as it may break.
● Do not use steamer on leather, wax polished furniture or waxed floors, synthetic
fabrics, velvet or other delicate steam-sensitive materials.
The factory and its affiliated companies assume no liability for personal injury or
property damage resulting from the misuse of the STEAM MOP, including the
failure to comply with instructions contained in this User Guide or provided by the
manufacturer or distributor of the treated surface.
21
https://manual-hub.com/
HOW TO USE OPTIONAL ACCCESSORIES
WINDOW CLEANING TOOL
Make sure the STEAM MOP is unplugged.
1) Fill the Water Tank with water. Please refer to the “HOW TO USE THE STEAM
MOP” section in this manual
2) Install the Coral Cloth onto the Window Cleaning Tool and attach the Window
Cleaning Tool to the Telescopic Hose as described in the “How to Assemble the
Optional Accessories” section in this manual.
3) Follow Steps 2-3 described in the” How
to use the Hand-held Steamer” section in this
manual.
4) Hold the Hand-held Steamer in on hand and
grasp the handle grip on the Telescopic Hose
with the other hand as illustrated.
5) Slowly pass over glass(or other similar) surface
to be cleaned. Apply steam liberally. The
absorbent Coral Cloth picks up the dirt
loosened by the steam, and the squeegee
blade removes any remaining trails of water.
Keep a towel handy and wipe away any
excess water that may accumulate.
Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting
in a steam leak.
DANGER OF SCALDING
Do not touch the Window Cleaning Tool/Coral Cloth during usage, as these
components can get extremely hot.
22
https://manual-hub.com/
Keep the Telescopic Hose away from your body and avoid touching the hose, as it
can get hot.
6) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
unit, refill the Water Tank and continue cleaning.
7) Once you finish cleaning, allow the Coral Cloth to cool down and carefully remove it
from the Window Cleaning Tool, as the cleaning cloth could still be hot.
●
●
Do not use the steam to clean frozen windows.
Be careful when using the steamer on glass, as it may break.
GARMENT STEAMER
Make sure that the STEAM MOP is unplugged.
1) Fill the Water Tank with water. Please refer to the “HOW TO USE THE STEAM
MOP section in this manual.
2) Install the Garment Steamer Cloth onto the Window Cleaning/Garment
Steaming Tool and attach the Window Cleaning/Garment Steaming Tool to the
Telescopic Hose as described in the “How to Assemble the Optional Accessories”
section in this manual.
3) Select one of the following Steam Regulator Positions: 1-Low or 2-Medium
Do not use 3-High and 4-Hot Spray steam settings when using the
Garment Steamer. When using the Garment Steamer. You can change the Steam
Regulator position and steam output while operating the STEAM MOP X 5.
4) Follow Step 3 described in the “How to Use the Hand-Held Steamer” section in this
manual.
5) To steam a garment, place item of clothing on the hanger and steam the garment
directly.
6) Hold the Hand-Held Steamer in one hand
and grasp the handle grip on the Telescopic
Hose with the other hand as illustrated.
Slowly slide the Garment Steamer Head
vertically, from the top to the bottom of the
garment. You may also reverse this motion
and steam from the bottom to the top.
Curtains and draperies can be steamed
while they are hanging.
23
https://manual-hub.com/
Please refer to label on item of clothing to check if garment can be steamed.
Some fabrics like leather, suede, and velvet may not be suitable for steaming.
If you are not sure then steam a small part of the inside of the garment to test
that it does not damage the fabric before steaming the entire garment or fabric.
CAUTION: Pulling on the Telescopic Hose with excessive force will damage the hose,
possibly resulting in a steam leak.
DANGER OF SCALDING
Do not touch the Garment Steamer Tool/Cloth during usage, as these
components can get extremely hot. Keep the Telescopic Hose away from your
body and avoid touching the hose as it can get hot.
7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
unit, refill the Water Tank and continue cleaning.
8) Once you finish cleaning allow the Garment Steamer Cloth to cool down and
carefully remove it from the Window Cleaning Tool, as the Garment Steamer
Cloth could still be hot.
DUSTER
Make sure that the STEAM MOP IS UNPLUGGED.
1) Fill the Water Tank with water. Please refer to
the “HOW TO USE THE STEAM MOP” section
in the manual.
2) Install the Coral Cloth onto the Duster frame and
attached the Duster to the extension Hose as
described in the “How To Assemble the Optional
Accessories” section in this manual.
3) Select one of the following Steam Regulator position: 1-Low,2-Medium or 3-High.
Do not use 4-Hot Spray steam setting when using the Duster. You can change the
Steam Regulator position and change the steam output while operating the STEAM
MOP.
4) Follow Step 3, described in the “How To Use the Hand-Held Steamer” section in
this manual.
24
https://manual-hub.com/
5) Hold the Hand-Held Steamer in one hand and grasp the handle grip on the
Telescopic Hose with the other hand as illustrated above.
6) Slowly pass over surface to be cleaned. The absorbent Coral Cloth picks up the dirt
loosened by the steam. Keep a towel handy and wipe away any excess water that
may accumulate.
Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a
steam leak.
DANGER OF SCALDING
Do not touch the Duster/Coral Cloth during usage, as these components can get
extremely hot. Keep the telescopic hose away from your body and avoid touching
the hose, as it can get hot.
7） When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
unit, refill the Water Tank and continue cleaning.
8) Once you finish cleaning allow the Duster Coral Cloth to cool down and carefully
remove it from the Duster frame, as the Coral Cloth could still be hot.
GARMENT STEAMING CLOTH
Make sure that the STEAM MOP is unplugged.
1) Fill the Water Tank with water. Please refer to
the “HOW TO USE THE STEAM Mop” section
in the manual.
2) Install the Garment Steaming Cloth onto the Window
Clearing/Garment Steaming Tool and attach the
Window Clearing/Garment Steaming Tool to
the Telescopic Hose as described in the “How To
Assemble the optional Accessories” section in
this manual.
3) Select one of the following Steam Regulator position: 1-Low or 2- Medium. Do not
use 3-High and 4 –Hot Spray steam settings when using the Garment Steamer. You
can change the Steam Regulator position and the steam out put while operating the
STEAM MOP.
25
https://manual-hub.com/
4) Follow Step 3, as described in the “How to Assemble the Optional Accessories”
section in this manual.
5) Hole the hand-held Steamer in one hand and grasp the handle grip on the
Telescopic Hose with the other hand as illustrated above.
6) Slowly pass over surface to be cleaned. The absorbent Lint Cloth picks up the
dirt/hair loosened by the steam. Do not use on animals.
Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a
steam leak.
DANGER OF SCALDING
Do not touch the Window Cleaning/Garment Steamer Tool or the Garment
Steaming Cloth during usage, as these components can get extremely hot.
Keep the Telescopic Hose away from your body and avoid touching the hose, as it
can get hot.
7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
unit, refill the Water Tank and continue cleaning.
8) Once you finish cleaning, allow the Lint Cloth to cool and carefully remove it from
the Window Cleaning.
Coral Cloth for Mop Head
Attach the triangle shaped Coral Cloth to the Mop Head following the same instructions
as provided for the Microfiber Cloth with Hook and Loop tape in the “HOW TO
ASSEMBLE THE STEAM MOP” section in this manual.
The Coral Cloth is soft and durable with hundreds of super absorbing fringes, ideal for
your sealed headword, ceramic and other types of flooring.
The factory and its affiliated companies assume no liability for personal injury or
property damage resulting from the misuse of the STEAM MOP, including the
failure to comply with the instructions contained in this User Guide or provided by
the manufacturer or distributor of the treated surface.
26
https://manual-hub.com/
AFTER USE
1) Unplug Power Cord from outlet.
2) Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from mop
Head, as cleaning cloth could still be hot.
3) Any water remaining in the Water Tank should be emptied prior to appliance
storage. Always empty the Water Tank at the end after each use.
4) Let any water (that may remain as a product of condensation) drain from the steam
opening prior to storing the appliance.
5) Wrap Power Cord around Upper and Lower Cord Wrap.
6) Wipe all surfaces of the STEAM MOP with a soft cloth.
7) Please store the unit in a cool and dry place when not in use. Do not leave it
exposed to sunlight or rain.
8) Upright storage of the STEAM MOP with a wet Mop Pad/Cloth may result in the
formation of white marks on your floor. To remove the white marks, clean the
specific area with vinegar. Make sure to remove the Mop Pad/Cloth before storage.
27
https://manual-hub.com/
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET
WHEN PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use. Please use
detergent to clean the accessories (Jet Nozzle and Rough Brush) when
they are dirty, then wash with clean water and air dry.
How to decalcify the Water Tank interior:
To clean calcium deposits that build up inside the Water Tank, add one or two
tablespoons of white vinegar to a full Water Tank, close the Water Tank cap and shake
the contents. DO NOT TURN THE STEAMER ON.
Let the unit sit for a few hours. Then, empty the Water Tank and refill with clean water
and empty until it rinses clear.
DO NOT IMMERSE THE STEAM MOP IN WATER.
● Cleaning procedure to remove lime scale
If your STEAM MOP begins to produce steam more slowly than usual or stops
producing steam, you may need to remove lime scale. Lime scale can develop over
time on the metal parts and greatly affect mop performance. It is necessary to remove
the scale on a regular basis every 25-50 times you use a full tank of water or at least
once a month, especially in areas with hard water. The frequency of lime scale
removal depends upon the hardness of your tap water and how often you use the
steam mop.
The STEAM MOP uses tap water. However, in areas with hard water,
Distilled water should be used for better performance.
To remove lime scale from the STEAM MOP, please follow these procedures:
28
https://manual-hub.com/
By using Scraper
1) Make sure that the STEAM MOP is disconnected from the power supply before
maintenance.
2) Use the cleaning pin to remove scale deposits from the small hole of the stream
outlet in the Main Body by swirling and pushing
the pin up and down you will clean the steam
outlet. Always ensure that all scale debris has
been removed from the steam outlet before
reassembling. Continue swirling Cleaning Pin
until no further debris is evident.
By using cleaning solution
1) Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water
tank.
2) Secure and position the unit to ensure steam released is slimed away from the
floor or surrounding objects and surfaces. Plug the unit in, turn the unit ON by
pressing the Power Switch (O/I) and allow the unit to produce steam until the
vinegar/water solution is used up.
3) Repeat the above procedures as many times as necessary until a normal steam
flow rate is achieved.
4) Fill the Water Tank with fresh water and rinse out.
5) Fill the Water Tank with fresh water, attach to the unit and release steam through
the system until the Water Tank is empty.
Do not leave the steamer unattended during the lime scale removal process
and /or while in use.
Perform a test cleaning on a suitable isolated area after each lime scale removal to
ensure that there is no debris in the system.
29
https://manual-hub.com/
DANGER OF SCALDING
● Cleaning blocked steamer accessories.
Due to the high mineral content of water in some areas, you may notice that less
steam comes out from the Hand-Held Steamer accessories. This may be caused by
calcium build-up inside the tip of the nozzle.
To clean calcium build-up, we recommend using a spray lubricant. Spray a small burst
or two of the lubricant inside the tip of the Jet Nozzle. After spraying lubricant inside
the component, fill the steamer with water according to the directions and run a
continuous jet of steam through the affected accessory to several minutes to remove
the deposit. Once the steam pathway is clean, aim the steamer at a neutral surface or
a cleaning cloth to make sure no debris is emitted.
WE RECOMMEND PREFORMING THIS PROCEDURE IN A PROTECTED AND
WELL-VENTILATED AREA.
Microfiber cloth care:
● Machine wash at 60℃(140℉)
● Do not bleach
● Do not use fabric softener
30
https://manual-hub.com/
TROUBLESHOOTING GUIDE
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, UNPLUG
APPLIANCE FROM OUTLET BEFORE SERVICING.
Problem
Possible Cause
Solution
The unit does not power on
The unit is not plugged in.
Make sure the unit is plugged
into a proper outlet and the
switch is ON(I).
Reduced steam or no steam
- Water Tank empty
- Blocked Steam Nozzle
- Lime Scale
- Fill Water Tank
- Remove the mop head and
clean the nozzle
- Follow cleaning procedure in
this manual
Steam escapes from
connections
- Attachment is not connected
properly.
- There's debris/obstructions
at the connection points.
- Turn the unit OFF, allow it to
cool down, disconnect the
accessories and reattach
them properly.
- Remove the accessory,
check and clean the
connection
The cleaning cloth gets wet
Exposure to moisture,
saturated with liquid
Remove the wet cloth and
replace with a new Cleaning
cloth (optional item). Or, wring
out and reattach.
31
https://manual-hub.com/
">
