Ansul Firefighting Foam Catalog

Ansul Firefighting Foam Catalog

FIREFIGHTING FOAM

PRODUCTS CATALOG

1-800-862-6785 or 1-715-735-7411 www.ansul.com

Firefighting Foam Products Catalog

Table of Contents

Firefighting Foam Agents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Special Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Foam Solution Test Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Handline Nozzles and Eductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Manual Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Automatic Water-Oscillating Monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

High-Flow Series Monitors/Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote-Controlled Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Master Stream Monitor Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Master Foam Monitor Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Air-Aspirating Foam Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MOBILCART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Proportioning Foam Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Around-the-Pump Proportioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

36-Gallon Foam Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Floating Roof Foam Makers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Foam Chambers/Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

JET-X High-Expansion Generators/Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Foam Systems Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Foam Concentrate Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Please Note: In addition to the portable foam equipment listed in this catalog, Tyco Fire Protection

Products also manufactures a variety of equipment made for fixed-foam system applications. These items include:

• Vertical and horizontal bladder tanks

• Bladder tank accessories

• Threaded and flanged proportioners

• In-line balanced pressure proportioners

• Polyethylene foam tanks

Please contact your ANSUL Field Sales Representative or call ANSUL Technical Services at

1-800-862-6785 or 1-715-735-7415 for design and pricing information of fixed-foam systems.

1-800-862-6785 or 1-715-735-7411 www.ansul.com

Firefighting Foam Agents

ANSULITE 1% AFFF Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or non aspirated discharge devices. 1% solution in fresh, salt or hard water. 1% premix in fresh or potable water. UL Listed.

5 gal (19 L) pail

PArT NO. 55804

55 gal (208 L) drum

PArT NO. 55811

265 gal (1003 L) tote

PArT NO. 432160

ANSULITE 6% AFFF Concentrate (AFC-3)

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 6% solution in fresh, salt or hard water. 6% premix in fresh or potable water. UL Listed.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 54391

PArT NO. 54392

PArT NO. 432155

ANSULITE 1% Freeze-Protected AFFF Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 1% solution in fresh, salt or hard water. 1% premix in fresh or potable water. Con cen trate is freeze protected to –20 °F (–29 °C).

UL Listed.

5 gal (19 L) pail

PArT NO. 415301

55 gal (208 L) drum

PArT NO. 415303

265 gal (1003 L) tote

PArT NO. 432156

ANSULITE PrEMIUM 6% AFFF

Concentrate MIL SPEC (AFC-5)

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 6% solution in fresh, salt or hard water. 6% premix in fresh or potable water. UL Listed. On QPL under U.S. Military

Specification MIL-F-24385F.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 68120

PArT NO. 68121

PArT NO. 432159

ANSULITE 3% AFFF Concentrate (AFC-3-A)

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels, and aviation fuels. Aspirated or nonaspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh or potable water. UL Listed.

5 gal (19 L) pail

55 gal (208 L) drum

PArT NO. 55800

PArT NO. 55809

265 gal (1003 L) tote

PArT NO. 431499

ANSULITE PrEMIUM 3%

AFFF Concentrate MIL SPEC (AFC-5-A)

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh or potable water. UL Listed. On QPL under U.S. Military

Specification MIL-F-24385F.

5 gal (19 L) pail

55 gal (208 L) drum

PArT NO. 68122

PArT NO. 68123

265 gal (1003 L) tote

PArT NO. 432336

ANSULITE 1X3 F-601A Ar-AFFF Concentrate

Superior firefighting performance on Class B fuel fires: 1% concentrate on hydrocarbon fuels such as gasoline, fuel oil, etc. and 3% on polar solvent (water miscible) fuels such as methyl alcohol, acetone, MTBE, etc. Aspirated or nonaspirated discharge devices. 1% or 3% solution in fresh, salt or hard water. 1% or 3% premix in fresh or potable water. UL Listed.

5 gal (19 L) pail

PArT NO. 437187

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 437188

PArT NO. 437189

ANSULITE 3x3 Low Viscosity Ar-AFFF Concentrate

Superior firefighting performance on Class B fuel fires. Used as 3% concentrate on BOTH hydrocarbon fuels such as gasoline, fuel oil, etc., and polar solvent (water miscible) fuels such as methyl alcohol, acetone, MTBE, etc.

Low viscosity formula enhances perform ance with in-line eductors, balanced pres sure systems and built-in systems on firefighting vehicles. Aspirated or non aspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh water. UL Listed,

FM and USCG Approved.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 416493

PArT NO. 416495

PArT NO. 429741

ANSULITE 3% Freeze-Protected AFFF Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh or potable water. Concentrate is freeze protected to

–20 °F (–29 °C). UL Listed.

5 gal (19 L) pail

PArT NO. 54783

55 gal (208 L) drum

PArT NO. 54892

265 gal (1003 L) tote

PArT NO. 432161

1-800-862-6785 or 1-715-735-7411

1

ANSULITE 3X6 F-600A Ar-AFFF Concentrate

Superior firefighting performance on Class B fuel fires: 3% concentrate on hydrocarbon fuels such as gasoline, fuel oil, etc.; 6% on polar solvent (water miscible) fuels such as methyl alcohol, acetone, MTBE, etc. Aspirated or non-aspirated discharge devices. 3% or 6% solution in fresh, salt or hard water. 3% or 6% premix in fresh or potable water. UL Listed.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 437197

PArT NO. 437198

PArT NO. 437199

www.ansul.com

Firefighting Foam Agents

ANSULITE ArC 3% and 6% Ar-AFFF Concentrate

For use on Class B fuel fires: 3% concentrate on hydrocarbon fuels such as gasoline, fuel oil, etc. and 6% on polar solvent (water miscible) fuels such as methyl alcohol, acetone, MTBE, etc. Aspirated or non aspirated discharge devices. 3% or 6% solution in fresh, salt or hard water. 3% or 6% premix in fresh or potable water. UL Listed and FM Approved.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 55797

PArT NO. 55808

PArT NO. 432157

ANSULITE ArC 3% or 6% Freeze Protected

Ar-AFFF Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or non aspirated discharge devices. 3 or 6% solution in fresh, salt or hard water. 3 or 6% premix in fresh or potable water.

Concentrate is freeze protected to 0 °F

(–18 °C). UL Listed.

5 gal (19 L) pail

PArT NO. 415245

55 gal (208 L) drum

PArT NO. 415246

265 gal (1003 L) tote

PArT NO. 432852

SILV-EX PLUS “Class A” Fire Control Concentrate

Makes water at least five times more effective on many Class A deepseated applications including wild fires and fires found in structures, paper, tires, and coal. Additionally, SILV-EX PLUS has been formulated to minimize its environmental signature containing no reportable sub stances and having no flashpoint. Proportioned from 0.1% to 1% in fresh, brackish or sea water; as a premix in fresh or potable water for long-term storage.

Delivered using aspirating and non aspirat ing discharge devices, com pressed air foam systems or dropped from fixed or rotary wing aircraft. Approved by U.S. Forest Service.

5 gal (19 L) pail

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 434467

PArT NO. 434469

PArT NO. 434471

ANSUL 3% Fluoroprotein Foam Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Must be used with air-aspirating type discharge devices. 3% solution in fresh, salt or hard water. UL Listed.

5 gal (19 L) pail

55 gal (208 L) drum

PArT NO. 73973

PArT NO. 73972

JET-X 2 3/4% Salt and Fresh Water

High-Expansion Foam Concentrate

For use on Class A, B and LNG fires.

Capable of total flooding large rooms and enclosures when used with JET-X highexpansion generators at 200:1 to 1000:1 expansion ratios (2 3/4% concentration). Also used with medium-expansion equip ment at

50:1 to 200:1 expansion ratios (2% concentration). Used only with air-aspirating foam discharge devices. UL Listed and FM

Approved.

5 gal (19 L) pail

PArT NO. 420008

55 gal (208 L) drum

265 gal (1003 L) tote

PArT NO. 420009

PArT NO. 431175

ANSUL 3% regular Protein Foam Concentrate

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Must be used with airaspirating type discharge devices. 3% solution in fresh, salt or hard water. UL

Listed.

5 gal (19 L) pail

PArT NO. 73971

55 gal (208 L) drum

PArT NO. 73970

JET-X 2% Fresh Water

High-Expansion Foam Concentrate

For use on Class A, B and LNG fires.

Capable of total flooding large rooms and enclosures when used with JET-X highexpansion generators at 200:1 to 1000:1 expansion ratios (2% concentration). Also used with medium-expansion equip ment at

50:1 to 200:1 expansion ratios (2% concentration). Used only with air-aspirating foam discharge devices. UL Listed.

5 gal (19 L) pail

PArT NO. 436879

55 gal (208 L) drum

PArT NO. 436881

265 gal (1003 L) tote

PArT NO. 436883

ANSUL-A Municipal “Class A”

Fire Control Concentrate

ANSUL-A foam concentrate is formulated using fluorine-free surfactants to perform on

Class A combustible materials. ANSUL-A foam is compatible for use in compressed air foam systems (CAFS) over the use range of 0.1% to 1.0%. The minimum storage temperature for this concentrate is

20 °F (–6.7 °C).

5 gal (19 L) pail

PArT NO. 433442

55 gal (208 L) drum

PArT NO. 433443

265 gal (1003 L) tote

PArT NO. 433558

ANSUL Foam Sample Kit

Use for demos or trade show displays.

Contains 6 samples of various

ANSULITE foam products in a convenient carry case.

PArT NO. 431512

1-800-862-6785 or 1-715-735-7411

2

www.ansul.com

Special Agents

TArGET 7 Vapor Mitigation & Neutralizing Agent

For use on highly toxic chemicals like chlorine dioxide and titanium tetrachloride.

Mitigates dangerous vapor releases and simultaneously neutralizes (with the addition of an acidic or caustic agent, depending on the application) the spilled material without causing additional vapor release.

5 gal (19 L) pail

PArT NO. 428500

55 gal (208 L) drum

PArT NO. 428499

265 gal (1003 L) tote

PArT NO. 428550

Training Foam

Not intended for live fire training or for actual firefighting operations. Functional in any proportioning and generating equip ment. Minimizes effects of training on the

environment. Expansion and drainage

char acteristics similar to conventional 3% and 6% AFFF products.

5 gal (19 L) pail

PArT NO. 428704

55 gal (208 L) drum

PArT NO. 428706

265 gal (1003 L) tote

PArT NO. 428707

Foam Solution Test Instruments

There are two acceptable methods for measuring foam concentrate percentage in water: the Refractive Index Method or Conductivity

Method. Both methods are based on comparing foam solution test samples to premeasured solutions that are plotted on a baseline graph of percent concentration versus instrument reading.

Test procedures for conducting proportioning testing can be found in the supplement manual (Part No. 31274) Field Inspection Manual for

Foam Concentrates and Foam Pre-mixed Solutions. This supplement is included with the Foam Systems Design Manual and many other

ANSUL Foam System Manuals. These procedures are also outlined in

NFPA 11.

Hand-held refractometer

• Refractive Index Scale: 1.3330 – 1.3730

• Scale Division: 0.0002 readily estimated to 0.0001

• Accuracy: ± 0.0001

• Salinity Scale: 0 – 160

• Scale Division: 2 ppt.

• Accuracy: ± 1 ppt.

Model 10419

007523

PArT NO. 405713

Digital Hand-held refractometer

• Refractive Index Scale: 1.3330 – 1.5040

• Scale Division: 0.0001

• Accuracy: ± 0.0001

• Brix Scale: 0 – 85

• Scale Division: 0.1

• Accuracy: ± 0.1

• Power: 2 AAA Batteries

Model PA202

Conductivity Meter

• Range of Instrument:

0 – 20000 uS, Range on

Foam Setting (x100):

0 – 2000 uS

• Accuracy: ± 40 uS

• Resolution: 2 uS

• Power: 8 Rechargeable

AA NICAD Batteries

Model 1500-32

007524

PArT NO. 434434

007525

PArT NO. 434435

Handline Nozzles and Eductors

Handline Nozzles

Designed for industrial and municipal use. Lightweight and rugged.

Adjustable tip offers straight stream, various fog patterns, 180° water curtain and a complete shutoff.

Handline Nozzle, L205B

Chrome-plated brass,

1 1/2 in NHT, 60 gpm (227 Lpm)

Handline Nozzle, L205B

Chrome-plated brass,

1 1/2 in NHT, 95 gpm (360 Lpm)

Handline Nozzle, L205B

Chrome-plated brass,

1 1/2 in NHT, 125 gpm (473 Lpm)

PArT NO. 72022

PArT NO. 470230

PArT NO. 435788

1-800-862-6785 or 1-715-735-7411

3

www.ansul.com

Handline Nozzles and Eductors

Low Expansion Nozzles

Used with all low expansion foam agents. Portable, air-aspirating stainless steel nozzle with ball shutoff valve. Recommended for use with the ANSUL Model Z eductor.

Kr-S2 Low Expansion Nozzle

60 gpm (227 Lpm) @ 100 psi (7 bar). Recommended for use with

ANSUL Z-2 eductor.

PArT NO. 415981

FWB Eductor with Pickup Tube and Metering

Valve

Brass construction. Flexible pickup hose and valve adjustable from 1 to 6% concentration.

1 1/2 in. NH, 60 gpm (227 Lpm)

PArT NO. 420068

1 1/2 in. NH, 95 gpm (360 Lpm)

PArT NO. 420069

Pickup Tube, 1 1/2 in. Replacement

PArT NO. 420071

2 1/2 in. NH, 120 gpm (454 Lpm)

PArT NO. 420070

Pickup Tube, 2 1/2 in. Replacement

PArT NO. 420072

Kr-S4 Low Expansion Nozzle

120 gpm (454 Lpm) @ 100 psi (7 bar). Recommended for use with

ANSUL Z-4 eductor.

PArT NO. 415982

Medium Expansion Nozzles

Portable, air-aspirating stainless steel nozzle with ball shutoff valve.

Recommended for use with the ANSUL Model Z eductor and

ANSULITE 3x3, JET-X High-Expansion or SILV-EX Plus Class A

Foam.

Kr-M2 Medium Expansion Nozzle

60 gpm (227 Lpm) @ 100 psi (7 bar).

Recommended for use with ANSUL

Z-2 eductor.

PArT NO. 415983

Foam Eductors

Metering valve adjustable from 0 to 6%. Efficient, low cost proportioning. Brass con struc tion, anodized aluminum couplings with

NHT threads.

Z-2 Foam Eductor,

60 gpm (227 Lpm).

PArT NO. 415979

Z-4 Foam Eductor,

120 gpm (454 Lpm).

PArT NO. 415980

Air-Aspirating Handline Nozzles

Kr-M4 Medium Expansion Nozzle

120 gpm (454 Lpm) @ 100 psi (7 bar). Recommended for use with

ANSUL Z-4 eductor.

PArT NO. 415984

Dual Expansion Nozzles

Easily convertible from medium to low expansion. Air-aspirating stainless steel nozzle with ball shutoff valve. Recommended for use with the ANSUL Model Z eductor and ANSULITE 3x3, JET-X High-

Expansion or SILV-EX Plus Class A Foam.

Kr-S/M2 Dual Expansion Nozzle

60 gpm (227 Lpm) @ 100 psi (7 bar).

Recommended for use with

ANSUL Z-2 eductor.

PArT NO. 415985

Kr-S/M4 Dual Expansion Nozzle

120 gpm (454 Lpm) @ 100 psi (7 bar). Recommended for use with

ANSUL Z-4 eductor.

PArT NO. 415986

1-800-862-6785 or 1-715-735-7411

4

Used with all low expansion foam agents. Stainless steel nozzle.

1-1/2 in. hose.

Without Shutoff, 60 gpm (227 Lpm). Recommended for use with

PL-60 line proportioner. 200 ft (61 m) max. hose between line proportioner and nozzle.

PArT NO. 77796

With Shutoff, 60 gpm (227 Lpm). Pistol-grip shutoff in anodized

aluminum. Recommended for use with ANSUL PL-60 line proportioner.

200 ft (61 m) max. hose between line proportioner and nozzle.

PArT NO. 77792

Without Shutoff, 95 gpm (360 Lpm). Recommended for use with

ANSUL PL-95 line proportioner. 100 ft (30.5 m) max. hose between line proportioner and nozzle.

PArT NO. 77797

With Shutoff, 95 gpm (360 Lpm). Pistol-grip shutoff in anodized

aluminum. Recommended for use with ANSUL PL-95 line proportioner. 100 ft (30.5 m) max. hose between line proportioner and nozzle.

PArT NO. 77793

Without Shutoff, 120 gpm (454 Lpm). Recommended for use with

ANSUL PL-120 line proportioner. 100 ft (30.5 m) max. hose between line proportioner and nozzle.

PArT NO. 77981

With Shutoff, 120 gpm (454 Lpm). Pistol-grip shutoff in anodized

aluminum. Recommended for use with ANSUL PL-120 line proportioner. 100 ft (30.5 m) max. hose between line proportioner and nozzle.

PArT NO. 78419

www.ansul.com

Monitors

Protector Station Manual Monitor

Patented waterway and stream straightening vane reduce friction loss and turbulence.

Designed to deliver water or foam solution at flows up to 1250 gpm (4732 Lpm).

Bolts directly to 4 in.

pipe flange. 2 1/2 in.

male NHT outlet. 1/2 in. NPT drain valve and

OrDEr NOZZLE SEPArATELY

pressure gauge ports.

The Protector is constructed of A356.0 ANSI alloy heat treated to T6 with poly-impregnation casting treatment. It is also hardcoat anodized per military specification MIL-A-8625F Type III, Class 1 and features polyester powder-coated outer surfaces inside and out. The swivel clamps, 3 in. valve ball, trunnions and hardware are 18-8 stainless steel. The monitor may be used to deliver water or foam streams.

Built-in on/off valve.

PArT NO. 427469

Manual Monitor MM-1000-3

Designed to deliver 1000 gpm (3785 Lpm) water or foam solution depending on nozzle selected. 3 in.

continuous tubing reduces friction loss. Single tiller bar operation with lock knobs. 3 in. 150 lb ANSI mounting flange. 360° sweep. 160° total vertical movement.

2 1/2 in. male NHT outlet.

Carbon steel with red polyester finish or stainless steel with electropolish finish.

OrDEr NOZZLE SEPArATELY

MM-1000-3

PArT NO. 400276

SS-MM-1000-3

PArT NO. 402825

Manual Monitor MM-1000-4

Designed to deliver 1000 gpm (3785 Lpm) water or foam solution depending on nozzle selected. 3 in. continuous tubing reduces friction loss. Single tiller bar operation with lock knobs. 4 in. 150 lb ANSI mounting flange. 360° sweep. 160° total vertical movement. 2 1/2 in.

male NHT outlet. Carbon steel with red polyester finish or stainless steel with electropolish finish.

MM-1000-4

PArT NO. 400286

SS-MM-1000-4

PArT NO. 402826

WOM-3 Automatic Water-Oscillating Monitor

Designed to deliver 1000 gpm (3785 Lpm) water or foam solution.

Automatically oscil lates via water-powered piston and cylinder. Field adjustable up to 200° sweep. 90° total vertical movement. Non-slip lock sets elevation. 4 in. 150 lb ANSI mounting flange. 2 1/2 in. male

NHT outlet. Stain less steel available.

WOM-3

PArT NO. 400000

WOM-3SS

PArT NO. 400251

WOM-4 Automatic Water-Oscillating Monitor

Designed to deliver 1750 gpm (6624 Lpm) water or foam solution.

Auto matically oscillates via water-powered piston and cylinder. Field adjustable up to 165° sweep. 114° total vertical movement.

Handwheel sets elevation. 4 in. 150 lb ANSI mounting flange. Special outlet flange connection for AFN-2 foam nozzle. Outlet adaptor available to NHT.

WOM-4

PArT NO. 402675

Optional Support Stand

Steel support stand facilitates mounting of monitor and inlet piping.

Fits WOM-3 and WOM-4 monitors.

PArT NO. 400987

Filter Package

Alternate filter package for muddy water applications. Fits WOM-3 and

WOM-4 monitors.

PArT NO. 77814

1-800-862-6785 or 1-715-735-7411

5

www.ansul.com

Monitors

High-Flow Series Monitors/Nozzles

The High-Flow Series achieves flow rates from 800 to more than 5000 gallons per minute (3000 to 18927 Lpm) depending on the model, nozzle setting, and inlet pressure. The dual waterway design, integrated nozzle, lightweight stainless steel construction and integral copper alloy nozzle make the High-Flow Series well suited for marine applications and other corrosive envir on ments. The manual monitor is available with a standard or self-educting nozzle.

FJM-80, 1000 gpm @ 232 psi (3785 Lpm @ 16 bar)

PArT NO. 431100

FJM-80 S with suction hose*

1000 gpm @ 232 psi (3785 Lpm @ 16 bar)

PArT NO. 431101

FJM-80 P, 800 gpm @ 200 psi (3000 Lpm @ 13.8 bar)

PArT NO. 431102

FJM-80 SP with suction hose*

800 gpm @ 200 psi (3000 Lpm @ 13.8 bar)

PArT NO. 431103

FJM-80 PO, 800 gpm @ 200 psi (3000 Lpm @ 13.8 bar)

PArT NO. 431104

FJM-80 SPO with suction hose*

800 gpm @ 200 psi (3000 Lpm @ 13.8 bar)

PArT NO. 431105

FJM-80-SWTO Self-Educting, Water Oscillating

PArT NO. 433806

FJM-80-WTO Water Oscillating

PArT NO. 433233

FJM-100, 1600 gpm @ 232 psi (6000 Lpm @ 16 bar)

PArT NO. 431106

FJM-100 S with suction hose*

1600 gpm @ 232 psi (6000 Lpm @ 16 bar)

PArT NO. 431107

FJM-100/C/MV EL**

1600 gpm @ 232 psi (6000 Lpm @ 16 bar)

PArT NO. 431108

FJM-100-WTO Water Oscillating

PArT NO. 432643

MODEL FJM-200

FJM-100-WTO-S Water Oscillating

PArT NO. 432704

FJM-150, 3100 gpm @ 232 psi (11,700 Lpm @ 16 bar)

PArT NO. 431109

FJM-150 S with 2 in. suction hose*

3100 gpm @ 232 psi (11,700 Lpm @ 16 bar)

PArT NO. 431110

FJM-150 G, 3100 gpm @ 232 psi

(11,700 Lpm @ 16 bar)

PArT NO. 431111

FJM-150 S G with 2 in. suction hose*

3100 gpm @ 232 psi (11,700 Lpm @ 16 bar)

PArT NO. 431112

FJM-150/C/MV EL**

3100 gpm @ 232 psi (11,700 Lpm @ 16 bar)

PArT NO. 431113

FJM-150-WTO Water Oscillating

PArT NO. 433235

FJM-200/C/MV G, 5300 gpm @ 232 psi (20,000 Lpm @ 16 bar)

PArT NO. 431114

FJM-200/C/MV S G with suction hose*

5300 gpm @ 232 psi (20,000 Lpm @ 16 bar)

PArT NO. 431115

FJM-200/C/MV EL/MV**

5300 gpm @ 232 psi (20,000 Lpm @ 16 bar)

PArT NO. 431116

* Specify flow, inlet pressure, concentrate and % concentration

** Specify voltage and current type

EL = electric gear motor driven; G = gear operated; O = water oscillating;

P = portable; S = self-educting

MODEL FJM-80

1-800-862-6785 or 1-715-735-7411

6

www.ansul.com

Master Stream Monitor Nozzles

Industrial Nozzles

Fixed orifice constant flow monitor nozzle. User adjustable fog angle from 90° to straight stream. 2-1/2 in. FNHT. Anodized CR Aluminum with UV-resistant rubber bumper. Recommended for use with

Protector Station, MM-1000, WOM-3 and WOM-4 monitors.

Industrial Nozzle, 350

350 gpm @ 100 psi (1325 Lpm @ 7 bar). Range is 183 ft @ 100 psi

(55.8 m @ 7 bar).

PArT NO. 427471

Industrial Nozzle, 500

500 gpm @ 100 psi (1893 Lpm @ 7 bar). User adjustable fog angle from 90° and straight stream. Range is 200 ft @ 100 psi (61 m @

7 bar).

PArT NO. 427472

Industrial Nozzle, 750

750 gpm @ 100 psi (2839 Lpm @ 7 bar). User adjustable fog angle from 90° and straight stream. Range is 219 ft @ 100 psi (66.8 m @

7 bar).

PArT NO. 427473

Industrial Nozzle, Specify gpm

Specify flow and pressure when ordering. Factory ordered fixed orifice: K-factors of 15-75. User adjustable fog angle from 90° and straight stream.

PArT NO. 427474

(Specify Flow and Pressure)

M-IF Nozzle

Fixed orifice constant flow monitor nozzle. Clean, far-reaching straight stream with flows up to 1050 gpm (3975

Lpm). Also adjustable to dense fog.

Factory ordered fixed orifice: K-factors of 75-105. 2-1/2 in. FNHT. Hard-coat anodized aluminum.

PArT NO. 427475

(Specify Flow and Pressure)

Master Stream 2000 Nozzle

300-2000 gpm @ 100 psi (1136-7571

Lpm @ 7 bar). Automatic high volume master stream nozzle designed to a constant 100 psi (7 bar) at the nozzle throughout its range. Lightweight hardcoat anodized aluminum provides maximum resistance to corrosion and water. Recommended for use with

ANSUL’s WOM-4 Manual Monitor.

PArT NO. 427470

1-800-862-6785 or 1-715-735-7411

7

www.ansul.com

Master Foam Monitor Nozzles

Self-Educting Nozzles

Educts foam concentrate at 0.5, 1, 3, or 6%. User adjustable fog angle from 120° and straight stream.

Anodized aluminum with UV-resistant rubber bumper. 2-1/2 in. FNHT. Recommended for use with

Protector Station, MM-1000 or SS-MM-1000 monitors.

350 gpm @ 100 psi (1325 Lpm @ 7 bar). Range up to 160 ft @ 100 psi (55.8 m @ 7 bar).

PArT NO. 427460

PArT NO. 427463 – 3X3LV OrIFICE

500 gpm @ 100 psi (1893 Lpm @ 7 bar). Range up to 175 ft @ 100 psi (61 m @ 7 bar).

PArT NO. 427461

PArT NO. 427464 – 3X3LV OrIFICE

750 gpm @ 100 psi (2839 Lpm @ 7 bar). Range up to 190 ft @ 100 psi (66.8 m @ 7 bar).

PArT NO. 427462

PArT NO. 427465 – 3X3LV OrIFICE

Protector Station Monitor and Hose Not Included

Self-Educting Monitor Connection Kits

Single Foam Drum Kit, 45 in. (1143 mm)

PArT NO. 428925

Dual Foam Drum Kit, 45 in. (1143 mm)

PArT NO. 429414

Add-on Foam Drum Kit, 45 in. (1143 mm)

PArT NO. 428926

FJM-80S, Kit Connection to Drum Kit

PArT NO. 434980

FJM-100S, 150S, 200S, Kit Connection to Drum Kit

PArT NO. 434981

The Dual Foam Drum Kit = Single Foam Drum Kit + Add-on Foam Drum Kit

FJM-80S, Tote Connection Kit

PArT NO. 434985

FJM-100S, 150S, 200S, Tote Connection Kit

PArT NO. 434982

Master Foam Nozzle, Tote Connection Kit

PArT NO. 434984

Vacuum Relief, Assembly for Totes

PArT NO. 434983

Air-Aspirating Foam Nozzles

AFN-1 Nozzles

Orifice plates can be sized from 250-1000 gpm (946-3785 Lpm) based on inlet pressure. Range from 50-190 ft (15-58 m) depending on pressure and elevation. 2-1/2 in. FNHT inlet swivel coupling attaches to WOM-3, MM-1000, or WOM-4 monitor with adaptor. Hard anodized aluminum with stainless steel fasteners and adjustment rod.

AFN-2 Nozzles

Orifice plates can be sized from 700-2000 gpm (2560-7571 Lpm) based on inlet pressure. Range from 60-200 ft (18-61 m) depending on pressure and elevation. Special flange inlet joint and O-ring attaches to WOM-4 monitor. Hard anodized aluminum with stainless steel fasteners and adjustment rod.

AFN-1 Nozzle

Field adjustable stream pattern from even fan to full straight stream.

PArT NO. 400200

AFN-1M Nozzle

Lever-operated stream pattern from even fan to full straight stream.

PArT NO. 400336

AFN-2 Nozzle

Field adjustable stream pattern: dispersed or full straight stream.

PArT NO. 77088

AFN-2M Nozzle

Lever-operated stream pattern: dispersed or full straight stream.

PArT NO. 77115

Call ansul if stainless steel nozzle is RequiRed!

1-800-862-6785 or 1-715-735-7411

8

www.ansul.com

MOBILCArT

36-Gallon Foam Cart

The ANSUL Mobile firefighting foam-attack cart is a self-contained fast-response cart ideal for small fires and chemical spills. It comes with a

36-gallon foam concentrate tank, a choice of three different types of nozzles at flows of 60 or 120 gpm (227 or 454 Lpm), a matching eductor, and two 50 ft (15.2 m) lengths of 1-3/4 in. double-jacketed and lined firehose with NHT fittings. Please specify nozzle and part number when ordering.

Cart with 60 gpm (227 Lpm) Low Expansion Kr-S2 Foam Nozzle

PArT NO. 429952

Cart with 60 gpm (227 Lpm) Medium Expansion Kr-M2 Foam Nozzle

PArT NO. 429953

Cart with 60 gpm (227 Lpm) Waterfog Nozzle

PArT NO. 429954

Cart with 120 gpm (454 Lpm) Low Expansion Kr-S4 Foam Nozzle

PArT NO. 429955

Cart with 120 gpm (454 Lpm) Medium Expansion Kr-M4 Foam Nozzle

PArT NO. 429956

Cart with 120 gpm (454 Lpm) Waterfog Nozzle

PArT NO. 429957

Proportioning Foam Trailers

Proportioning Foam Trailer

Trailer assembly con structed of structural steel channel with axle(s), wheels and tires designed to carry gross weight of trailer with equipment including carbon steel tank with removable gasketed top, in-line balanced pressure propor tioning system and positive displacement foam concentrate pump.

PTF-500, 500 gal (1893 L)

PArT NO. 415144

PTF-750, 750 gal (2839 L)

PArT NO. 415145

PTF-1000, 1000 gal (3785 L)

PArT NO. 415146

Master Foam Tote-Trailer

Trailer assembly con structed of structural steel channel with axle(s), wheels and tires designed to carry gross weight of trailer with equipment including 265 gal (1003 L) capacity foam tote tank made of high-density poly ethylene and protected by a rigid welded galvanized tubular steel grid. Also includes a Protector Station Monitor with built-in on/off valve and ANSUL Master Foam nozzle.

PArT NO. 428560

1-800-862-6785 or 1-715-735-7411

9

Dual Tote Trailer (not pictured)

PArT NO. 471019

www.ansul.com

Around-the-Pump Proportioners

Around-the-Pump Proportioner

Proportions foam concentrate and water at the desired percentage in a fire pump system. The number of different foam concentrates is only limited by available space as each foam concentrate requires its own separate tank. Can be used for various shipboard applications. Water flow rates listed apply to 3% ANSUL foam concentrates.

Model Dual B-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP,

Class A and B

PArT NO. 420011

Model B-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP, Class B

PArT NO. 420012

Model W-2 Pkg. 20-400 gpm (76-1515 Lpm), ATP, Class A

PArT NO. 420013

Model 1200 Pkg. 60-1200 gpm (227-4543 Lpm), ATP, Class B

PArT NO. 420014

Model 1600 Pkg. 150-1600 gpm (568-6057 Lpm), ATP, Class B

PArT NO. 420015

Eductor

PArT NO. 420016

Metering Valve, 1-L

PArT NO. 420017

Metering Valve, 1-W

PArT NO. 420018

Metering Valve, Panel Mount

PArT NO. 420019

WATER

FOAM

CONC.

FOAM

SUPPLY VALVE

FOAM

CONC.

CHECK

VALVE

EDUCTOR

WATER BY-PASS

VALVE

INSTRUCTION

PLATE

001188

1-800-862-6785 or 1-715-735-7411

10

www.ansul.com

36-Gallon Foam Station

Bladder Tank

Elastomeric bladder stores foam liquid concentrate discharged by incoming water applying pressure to bladder (not shown).

Standard red Paint

PArT NO. 404127

Bladder Tank Pre-Piped to 2 in. Proportioner

Bladder tank with 2 in. proportioner for nominal flow range of 30-300 gpm (114-1136 Lpm).

Standard red Paint

PArT NO. 403942

Foam Station with Hose reel and Nozzle

Continuous flow hose reel with straight-through internal fittings, designed to provide a minimum pressure drop. 1-1/2 in. hard rubber booster hose. Nozzle is variable stream (water/AFFF), rated for nominal flow of 95 gpm (379 Lpm) at 100 psi (7 bar).

Standard red Paint, 75 ft (23 m) hose

PArT NO. 76400

Standard red Paint, 100 ft (30.5 m) hose

PArT NO. 404103

Floating roof Foam Makers

Floating roof Foam Maker, Stainless Steel

Flow ranges based on 30 psi (2 bar) for smallest orifice and 150 psi (10 bar) for largest.

Re mov able orifice plate delivers foam solution over a range of flow rates depending on inlet pressure.

FLr-30

7-71 gpm (26-269 Lpm) flow range.

PArT NO. 75615

FLr-90

31-184 gpm (117-696 Lpm) flow range.

PArT NO. 75633

FOAM

MAKER

SPLASH

BOARD

FOAM

DAM

FLOATING

ROOF

SOLUTION

SUPPLY PIPING

007597

Floating roof Foam Pourers

Air-aspirating foam discharge device designed to protect floating roof, flammable liquid storage tanks. Classified as Type II discharge device in accordance with NFPA 11, “Standard for Low-Expansion Foam.” Pressure range 30-150 psi (2-10 bar). Designed for UL Listed floating roof foam maker.

FLr-30-FP

7-71 gpm (26-269 Lpm) flow range.

A stainless steel foam solution strainer is provided.

PArT NO. 428170

FOAM

POURER

FOAM DAM

FLr-90-FP

31-184 gpm (117-696 Lpm) flow range

PArT NO. 428171

FOAM

FLOATING

ROOF

1-800-862-6785 or 1-715-735-7411

STORAGE TANK WALL

11

www.ansul.com

Foam Chambers/Accessories

Foam Chamber/Maker

Air-aspirating foam discharge device used to protect flammable liquid storage tanks.

Foam expansion chamber, integral foam maker, stainless steel screened air inlet and orifice plate. Flow range: 49-151 gpm (185-572 Lpm) at 40-100 psi (3-7 bar).

AFC-90

Flow range: 49-151 gpm (185-572 Lpm) at

40-100 psi (3-7 bar)

AFC-90, Primed, PArT NO. 75887

AFC-90, Standard red Paint, PArT NO. 75883

AFC-170

Flow range: 94-279 gpm (356-1033 Lpm) at

40-100 psi (3-7 bar)

AFC-170, Primed, PArT NO. 75888

AFC-170, Standard red Paint, PArT NO. 75884

AFC-330

Flow range: 183-610 gpm (693-2309 Lpm) at

40-100 psi (3-7 bar)

AFC-330, Primed, PArT NO. 75889

AFC-330, Standard red Paint, PArT NO. 75885

AFC-550

Flow range: 350-980 gpm (1325-3709 Lpm) at

40-100 psi (3-7 bar)

AFC-550, Primed, PArT NO. 75890

AFC-550, Standard red Paint, PArT NO. 75886

ORIFICE

PLATE

HINGED

INSPECTION

HATCH

CHAMBER

BODY

INLET

FLANGE

OUTLET

FLANGE

GASKETS

GASKETS

MOUNTING

PAD

TANK

WALL

SPLIT

DEFLECTOR

Call ansul if CR ‘CoRRosion Resistant’ Paint system is RequiRed!

Foam Chamber/Maker Split Deflector

Directs foam stream down tank sidewall to lessen the submergence of the foam and agitation of the fuel surface. Allows for bolting or welding to storage tanks.

AFC-90, Primed, PArT NO. 74376

AFC-170, Primed, PArT NO. 74380

AFC-330, Primed, PArT NO. 74384

AFC-550, Primed, PArT NO. 74388

Foam Chamber Vapor Seal Assembly

Teflon construction, meets UL required burst pressure range of

10-25 psi (0.7-1.7 bar)

AFC-90 Vapor Seal Assembly, PArT NO. 418581

AFC-170 Vapor Seal Assembly, PArT NO. 418582

AFC-330 Vapor Seal Assembly, PArT NO. 418583

AFC-550 Vapor Seal Assembly, PArT NO. 418584

AFC-90 Cover Gasket, PArT NO. 75985

AFC-170 Cover Gasket, PArT NO. 75986

AFC-330 Cover Gasket, PArT NO. 75987

AFC-550 Cover Gasket, PArT NO. 75988

Foam Chamber Mounting Pad

Used to bolt foam chamber and deflector to storage tank. Contains mounting studs to fit standard flange holes.

AFC-90 Mounting Pad, Primed, PArT NO. 74392

AFC-170 Mounting Pad, Primed, PArT NO. 74396

AFC-330 Mounting Pad, Primed, PArT NO. 74400

AFC-550 Mounting Pad, Primed, PArT NO. 74404

Foam Chamber Orifice Plate

Removable, sized to deliver the required flow rate of foam solution at a specified inlet pressure.

AFC-90 Orifice Plate, PArT NO. 74610

AFC-170 Orifice Plate, PArT NO. 74611

AFC-330 Orifice Plate, PArT NO. 74612

AFC-550 Orifice Plate, PArT NO. 74613

Foam Chamber Diverter Test Tube

Used for foam solution quality testing.

AFC-90 Foam Diverter Test Tube, PArT NO. 74408

AFC-170 Foam Diverter Test Tube, PArT NO. 74412

AFC-330 Foam Diverter Test Tube, PArT NO. 74416

AFC-550 Foam Diverter Test Tube, PArT NO. 74420

Foam Chamber Cover Screw, All Models, PArT NO. 75968

1-800-862-6785 or 1-715-735-7411

12

www.ansul.com

JET-X High-Expansion Generators/Accessories

High-Expansion Generators/Accessories

Water-powered. Designed to deliver JET-X high-expansion foam with a maximum output capacity of 28,800 cfm. The generators are of steel construction with a water powered motor and stainless steel foam screen. No electrical power is required. The generators come in various sizes and are used for both portable and fixed-system applications.

High-Expansion Generator, JET-X-2A

2 %: 2,777 cfm (78.6 cmm) @ 75 psi (5 bar). UL Listed.

PArT NO. 420001

High-Expansion Generator, JET-X-5A

2 %: 9,383 cfm (265.7 cmm) @ 75 psi (5 bar). UL Listed.

PArT NO. 420003

High-Expansion Generator, JET-X-15A (UL)

2 %: 19,141 cfm (542.0 cmm) @ 75 psi (5 bar). UL Listed.

PArT NO. 420005

High-Expansion Generator, JET-X-15A (LNG)

2 %: 17,769 cfm (503.2 cmm) @ 75 psi (5 bar).

UL Listed.

PArT NO. 420007

High-Expansion Generator, JET-X-15A (FM)

2 3/4%: 17,985 cfm (509.3 cmm) @ 75 psi (5 bar).

FM Approved with 2 3/4% concentrate only.

PArT NO. 420006

High-Expansion Generator, JET-X-20

2 3/4%: 21,145 cfm (598.8 cmm) @ 75 psi (5 bar).

UL Listed.

PArT NO. 421590

High-Expansion Generator, JET-X-27

2 %: 27,303 cfm (773.1 cmm) @ 75 psi (5 bar).

UL Listed with 2% concentrate only.

PArT NO. 436899

Portable High-Expansion Foam Generators

Portable foam generator may be used for total flooding or local application. Minimizes water damage. Supplied with 100 ft (30 m) of expandable polyethylene ducting. Common applications include warehouses, ship holds, engine rooms, enclosed spaces and mining.

Corrosion-resistant pipe work and fittings.

JET-X-PFG-7

7,200 cfm (204 cmm) @ 145 psi (10 bar)

PArT NO. 430837

JET-X-PFG-M

2,600 cfm (74 cmm) @ 123 psi (8.5 bar)

PArT NO. 430839

1-800-862-6785 or 1-715-735-7411

13

www.ansul.com

Foam Systems Training

Foam Systems Design and Specification Training

This program is recommended for all personnel involved in the specification, design, installation or commissioning of foam systems. It includes all areas of the design, equipment selection, foam agent application and installation of fixed foam systems for a variety of hazards in accordance with NFPA

Standards. Special emphasis is given to the identification and specifications of all component parts of the different fixed foam systems.

Day 1

Foam Agents

Foam System Discharge Devices and Mobile Equipment

Foam System Component Requirements

Bladder Tank Systems

Pump Systems

Line Proportioner Systems

Sprinkler Systems – Types and Applications

Day 2

Foam System Design Procedures and Bills of Material Preparation

Closed-Head Foam-Water Sprinkler Systems and Flammable Liquid

Storage – NFPA 16 and 30

Aircraft Hangers – NFPA 409

High-Expansion Systems – NFPA 11

Day 3 (a.m. only)

Fuel Storage Tanks – NFPA 11

Truck/Rail Car Loading Facilities – NFPA 11 and 16

Foam System Check-out Procedures

Bladder Tank Filling Procedures

Foam Systems Service and Maintenance Training

This program will provide an overview of the basic types of fixed foam systems but will focus on the correct service and maintenance procedures for the various systems. Students will have an opportunity for actual hands-on experience on foam testing procedures, bladder tank filling and more.

Day 1

Foam Agents – AFFF, Class A, High-Expansion

Foam System Discharge Devices and Mobile Equipment

Foam System Component Requirements

Bladder Tank Systems

Pump Systems

Line Proportioner Systems

Sprinkler Systems – Types and Applications

Overview of Foam System Design

Day 2

The Environment and Disposal Issues

Fixed Foam System Commissioning Procedures

Refractive Index Testing

Conductivity Testing

Bladder Tank Filling

Oscillating Monitor Adjustment and Winterizing

Pressure Regulating Valve Adjustment and Testing

1-800-862-6785 or 1-715-735-7411

14

www.ansul.com

Is Your Foam Washed Up?

The only way to be sure of foam quality is through annual testing, as recommended by NFPA 11…

NFPA 11: Standard for Low-Expansion Foam, Chapter 7.2, Foam Concentrate Inspection, states: At least annually, an inspection shall be made of foam concentrates and their tanks or storage containers for evidence of excessive sludging or deterioration. Samples of concentrates shall be sent to the manufacturer or qualified laboratory for quality condition testing. Quantity of concentrate in storage shall meet design requirements, and tanks or containers shall normally be kept full, with adequate space allowed for expansion.

We Put It to the Test

Tyco Fire Protection Products is a full line foam manufacturer with a Qualified Agents Laboratory equipped to conduct a complete quality analysis with each foam sample you send (including foams from other manufacturers). The analysis includes:

• pH

• Density

• Refractive Index

• Foam Quality

• Fire Performance

• Comments and Recommendations

The ANSUL Foam Agent Test Kit provides the containers and instructions to facilitate taking samples and shipping them to our laboratory.

Order the ANSUL Foam Agent Test Kit (Part No. 428679) from your local distributor or call us at 1-800-862-6785 or 1-715-735-7415

1-800-862-6785 or 1-715-735-7411

15

www.ansul.com

1-800-862-6785 or 1-715-735-7411 www.ansul.com

One Stanton Street

Marinette, WI 54143-2542

USA

800-862-6785 (United States, Canada)

+1-715-735-7411 (International) www.ansul.com

Copyright ©2011 Tyco Fire Protection Products. All rights reserved.

Form No. F-2002001-07

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project