Atmel 08PIA-DK ATSAM9708 and ATSAM3303 Digital Piano User Guide

08PIA-DK Digital Piano with
ATSAM9708 and ATSAM3303
..............................................................................................
User Guide
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
6163A–DRMSD–12-Jul-05
Table of Contents
Section 1
1.1
1.2
1.3
1.4
1.5
Introduction ...............................................................................................1-1
Connection Instructions ............................................................................1-1
Front Panel ...............................................................................................1-2
Implementation .........................................................................................1-2
Optional Functions ....................................................................................1-5
Section 2
2.1
2.2
Document Details......................................................................................2-1
Revision History ........................................................................................2-1
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
i
6163A–DRMSD–12-Jul-05
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
6163A–DRMSD–12-Jul-05
Section 1
Connecting the 08PIA-DK
1.1
Introduction
The 08PIA-DK is a high quality stand-alone evaluation board based on the ATSAM9708
and the ATSAM3303 dedicated to digital piano and keyboard instruments.
1.2
Connection
Instructions
! Connect the front panel to the main board.
! Connect the main board to a FATAR TP10 (or TP23) keyboard.
! Connect the main board to pedal (see Table 1-1 for pinout).
! Connect the main board audio outputs to line level inputs of a mixer, a stereo sound
system, etc.
! Connect the main board to 12V/1A DC power supply (- to tip, + to ring).
Table 1-1. Pedal Inputs (J15) Pinout
Pin No.
Function
Description
1
Pedal Ground
Reference Ground for pedal inputs
2
Forte (Sustain)
6 level Half-pedal
• Sustain Max if connected to Pedal Ground
• Sustain Off if not connected
3
Sostenuto
On/Off pedal
• Sostenuto on if connected to Pedal Ground
• Sostenuto off if not connected
4
Una Corda (Soft)
On/Off pedal
• Soft on if connected to Pedal Ground
• Soft off if not connected
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
1-1
6163A–DRMSD–12-Jul-05
Connecting the 08PIA-DK
1.3
Front Panel
Figure 1-1. 08PIA-DK Front Panel
Tempo +
Style Selection
Tempo -
Rhythm Only
Equalizer:
- Treble
- Bass
Set
Variation
Instrument Select
Chorus
Demo
Reverb
Rec Mode
Dynamic
Track 2
Intro/Ending
Track 1
Fill In/Key Start
Metronome
Start/Stop
1.4
Implementation
1.4.1
Instrument Select
Play/Rec Start
Table 1-2. Instrument Select
Setting
Instrument
1
Studio Grand Piano
2
Concert Grand Piano
3
Electric Piano 1
4
Electric Piano 2
5
Harpsichord
6
Vibes
7
Strings
8
Church Organ
Layer (dual) mode is available by simultaneously pressing two “Instrument Select”
buttons.
1-2
6163A–DRMSD–12-Jul-05
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Connecting the 08PIA-DK
1.4.2
Reverb Type
Possible settings are:
! Room1
! Room2
! Hall
Reverb depth can be set for each instrument. Follow the steps below:
1. Hold the “Reverb” button pressed down.
2. Use the “Tempo +/-” buttons to adjust the reverb depth in the range from 0 to 20
1.4.3
Chorus
Possible settings are:
! Off
! Chorus1
! Chorus2
Chorus depth can be set for each instrument. Follow the steps below:
1. Hold the “Chorus” button pressed down.
2. Use the “Tempo +/-” buttons to adjust the chorus depth in the range from 0 to 20.
1.4.4
Dynamic Curve
Possible settings are:
! Normal
! Hard
! Soft
! Fixed Velocity (default = 64)
The value for the fixed velocity can be set:
1. Press the “Dynamic” button repeatedly until all the “Dynamic” LEDs are off.
2. Hold the “Dynamic” button pressed down.
3. Use the “Tempo +/-” buttons to adjust the fixed dynamic in the range from 0 to
127.
1.4.5
Sympathetic
Resonance
Press the “Set” button repeatedly.
! 0 = No resonance
! 1 = Low resonance depth
! 2 = Medium resonance depth
! 3 = High resonance depth
1.4.6
Demo
Press “Demo”, then press the “Instrument Select” button 1, 2 or 3.
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
1-3
6163A–DRMSD–12-Jul-05
Connecting the 08PIA-DK
1.4.7
Metronome
Possible settings are:
! On
! Off
The metronome signature can be set. Follow the steps below:
1. Hold the “Metronome” button” pressed down.
2. Use the “Tempo +/-” buttons to choose the signature.
Available signatures are 1/4, 2/4, 3/4, 4/4, 6/4, 6/8, 12/8.
1.4.8
Sequencer
Use “Rec Mode”, “Play/Rec Start”, “Track 1" and “Track 2" buttons.
Below is an example of how to use the sequencer:
! Record track 1:
1. Press the “Rec Mode” button. The “Rec Mode” LED is lit.
2. Press the “Track 1" button. “Play/Rec Start” and “Track 1" LEDs are flashing.
3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” button. “Play/Rec Start” LED stops flashing and stays lit.
4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off.
! Play track 1:
1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED is lit.
2. Press the “Play/Rec Start” button to play what is recorded on Track 1. The
“Play/Rec Start” LED is lit.
! Record track 2:
1. Press the “Rec Mode” button. “Rec Mode” and “Track 1" LEDs are lit.
2. Press the “Track 2" button. “Play/Rec Start” and “Track 2" LEDs are flashing
3. Start recording by playing the keyboard or by pressing the “Play/Rec Start” button. “Play/Rec Start” LED stops flashing and stays lit.
4. Stop recording by pressing the “Rec Mode” button. “Rec Mode” LED is off.
! Play track 1 and track 2:
1. If “Track 1" LED is not lit, press the “Track 1" button. The “Track 1" LED lights up.
2. If “Track 2" LED is not lit, press the “Track 2" button. The “Track 2" LED lights up.
3. Press the “Play/Rec Start” button to play what is recorded on Track 1 and Track
2. The “Play/Rec Start” LED is lit.
1-4
6163A–DRMSD–12-Jul-05
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Connecting the 08PIA-DK
1.5
Optional
Functions
1.5.1
Style Player
Use “Intro/Ending”, “Fill-In”, “Start/Stop”, “Variation”, “Rhythm Only” and “Style Selection” buttons.
1.5.2
Style Selection
Hold the “Style Selection” button and select with “Tempo+/-” buttons.
Table 1-3. Style Selection Settings
Setting
Style
0
EuroPop
1
90s Dance
2
KickDance
3
80s Pop
4
TechnoRock
5
Country
6
Beguine
7
Bossa
8
Blues
9
JazzTet
10
Rock&Roll
11
Soca
12
Lounge
13
Waltzer
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
1-5
6163A–DRMSD–12-Jul-05
Connecting the 08PIA-DK
1-6
6163A–DRMSD–12-Jul-05
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Section 2
Revision History
2.1
Document
Details
2.1.1
Title
08PIA-DK User Guide
2.1.2
Literature Number
6163
2.2
Revision History
2.2.1
Version A
First issue.
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
2-1
6163A–DRMSD–12-Jul-05
Revision History
2-2
6163A–DRMSD–12-Jul-05
08PIA-DK Digital Piano with ATSAM9708 and ATSAM3303 User Guide
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
6163A–DRMSD–12-Jul-05