Compact Pram - Baby Jogger

Compact Pram
For use on single stroller
Mounting
Bracket
Single Attachment
Brackets
2 P ull elastic seat fabric away from stroller
mounting bracket.
1 Fully recline stroller seat.
3 Insert left and right Compact Pram attachment brackets into corresponding
stroller mounting bracket until they click into place. NOTE: Left and right
4 H
olding the Compact Pram handles,
align attachment brackets with Compact
Pram mounting brackets.
is determined by standing in front of and facing the stroller.
Indicator
5 S lide Compact Pram onto attachment
brackets until it clicks into place.
NOTE: The Compact Pram is correctly
attached if green is the only color
showing through the indicator.
6 A
fter the Compact Pram is attached to
the stroller, fasten handle snap to snap
on foot cover.
To remove the Compact Pram from the stroller:
Pull release triggers
located under both
plastic side handles
on the Compact
Pram and lift off of
attachment brackets.
Warning:
To ensure a secure lock, make
sure nothing is caught between
the Compact Pram attachment
brackets and the stroller mounting
brackets, including blankets, seat
liners, stroller fabric, etc.
8575 Magellan Parkway
Suite 1000
Richmond, VA 23227
T: 800-241-1848
F: 804-262-6277
www.babyjogger.com
Compact Pram
For use on City Mini double stroller:
Choose which side of the stroller you wish to place the Compact Pram on and remove stroller
canopy following steps 1 & 2. If using two Compact Prams, repeat instructions for both seats.
Uses:
Mounting
Bracket
One Compact Pram
1T
o remove canopy:
Press gray button on mounting
bracket while gently pulling
canopy bracket out.
2 P ress gray button on center
canopy mounting bracket while
gently pulling canopy bracket
out. Unfasten all Velcro on the
back of the canopy to fully
remove from stroller frame.
3 Fully recline stroller seat.
4 Insert center Compact Pram
attachment bracket into the
center mounting bracket on
the stroller.
5 P ull elastic seat fabric
away from outside stroller
mounting bracket.
6 Insert outside Compact Pram
attachment bracket into outside
stroller mounting bracket.
Two Compact Prams
Center
Outside
Double Attachment Brackets
Indicator
Indicator
6 Holding
the Compact Pram
handles, align attachment
brackets with Compact Pram
mounting brackets.
7 S lide Compact Pram onto
attachment brackets until it
clicks into place.
8 After
the Compact Pram is
attached to the stroller, fasten
handle snap to snap on
foot cover.
NOTE: Repeat these
steps if placing two
Compact Prams on your
City Mini double.
Warning:
NOTE: The Compact Pram is correctly
attached if green is the only color
showing through the indicator.
To remove the Compact
Pram from the stroller:
Pull release triggers located under
both plastic side handles on the
Compact Pram and lift off of
attachment brackets.
To ensure a secure lock, make sure nothing is caught between the Compact Pram attachment
brackets and the mounting brackets, including blankets, seat liners, stroller fabric, etc.