HP Compaq Presario,Presario 5BW284 Specifications

Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS
CATALOG
REMOVAL AND
REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
http://h18000.www1.hp.com/athome/support/msgs/bmw400/index.html [12/9/2002 12:08:47 PM]
See the Notice for copyright and
trademark information, and the
Preface for symbol conventions and
Technician Notes.
Click to download ZIP file
of complete MSG to hard
drive.
This MSG will be periodically
maintained and updated as needed.
To report a technical problem,
contact your Regional Support
Center or IM Help Center.
For content comments or questions,
contact Tech Support
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Notice
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL
ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of this guide may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation. © 2000 Compaq Computer Corporation. All rights reserved. Compaq, Presario
Registered U. S. Patent and Trademark Office.
Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation.
Windows 98 is a trademark of Microsoft Corporation. The software described in this guide is
furnished under a license agreement or nondisclosure agreement. The software may be used
or copied only in accordance with the terms of the agreement. Product names mentioned
herein may be trademarks and/or registered trademarks of their respective companies.
Online Maintenance and Service Guide
Compaq Presario 7000 Series Personal Computers
October 2000
Return to Online Maintenance and Service Guide
http://h18000.www1.hp.com/athome/support/msgs/bmw400/notice.html [12/9/2002 12:09:26 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Preface
This Maintenance and Service Guide is a troubleshooting guide that can be
used for reference when servicing the Compaq Presario Series Personal
Computers.
Compaq Computer Corporation reserves the right to make changes to the
Compaq Presario 5000 Series Personal Computers without notice.
Symbols
The following words and symbols mark special messages throughout this
guide.
Text set off in this manner indicates that failure to
WARNING follow directions in the warning could result in
bodily harm or loss of life.
Text set off in this manner indicates that failure to
CAUTION follow directions could result in damage to
equipment or loss of data.
IMPORTANT
NOTE
Text set off in this manner presents clarifying
information or specific instructions.
Text set off in this manner presents commentary,
sidelights, or interesting points of information.
Technician Notes
Only authorized technicians trained by Compaq
should repair this equipment. All troubleshooting
and repair procedures are detailed to allow only
subassembly/module level repair. Because of the
complexity of the individual boards and
WARNING subassemblies, the user should not attempt to
make repairs at the component level or to make
modifications to any printed circuit board.
Improper repairs can create a safety hazard. Any
indications of component replacement or printed
circuit board modifications may void any warranty.
Locating Additional Information
The following documentation is available to support this product:
●
●
●
●
●
●
●
Compaq Presario documentation set
Introducing Windows 98 Guide
Service Training Guides
Compaq Service Advisories and Bulletins
Compaq QuickFind
Compaq Service Quick Reference Guide
Compaq Help Center
Return to Online Maintenance and Service Guide
http://h18000.www1.hp.com/athome/support/msgs/bmw400/preface.html [12/9/2002 12:09:36 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
TROUBLESHOOTING
PRODUCT DESCRIPTION INDEX PAGE
ILLUSTRATED PARTS CATALOG
Models and Features
REMOVAL AND REPLACEMENT
PROCEDURES
CPU Controls and Lights
PRODUCT DESCRIPTION
JUMPER AND SWITCH INFORMATION
SPECIFICATIONS
Side Access Panel
Internet Keyboard Controls
Rear CPU Connectors
Connector pin assignments
Power Cord Set Requirements
General requirements
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1Main.html [12/9/2002 12:09:42 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Models and Features
CPU CONTROLS
AND LIGHTS
Model
Processor
Hard
Drive
CD/ CDRW/ DVD
Memory
5BW420
Cel 766
MHz/66
20.0
48x-tray
64 PC
133up
5BW430
Cel 800
MHz/370
20.0
8XCD-RW
64 PC
133up
REAR CPU
CONNECTORS
5BW431
Cop 933
MHz/133
20.0
48x-tray
64 PC
133up
POWER CORD
SET
5BW432
Cel 766
MHz/66
20.0
48x-tray
64 PC
133up
5BW433
Cel 800
MHz/100
20.0
48x-tray
64 PC
133up
5BW440
Cel 800
MHz/100
20.0
48x-tray
64 PC
133up
5BW451
Cop 933
MHz/133
20.0
10x-12x-16x DVD
64 PC
133up
5BW460
Cop 1
GHz/133
20.0
48x-tray
64 PC
133up
Cop 1.0
GHz/133
20.0
8xCD-RW
64 PC
133up
5BW470
Cop 1
GHz/133
40.0
8XCD-RW
128 PC
133up
5BW470
Cop 1
GHz/133
40.0
10x-12x-16x DVD
5BW470
Cop 1
GHz/133
40.0
48x-tray
5BW470
Cop 1
GHz/133
20.0
8XCD-RW
5BW470
Cop 1
GHz/133
30.0
8XCD-RW
64 PC
133up
5BW471
Cop 1.0
GHz/133
20.0
8xCD-RW
64 PC
133up
5BW472
Cop 1.0
GHz/133
40.0
48x-tray
128 PC
133up
5BW473
Cop 1.0
GHz/133
40.0
10x-12x-16x DVD
128 PC
133up
5BW474
Cop 1.0
GHz/133
30.0
8xCD-RW
128 PC
133up
5BW480
Cop 1.13
GHz/133
40.0
8XCD-RW
128 PC
133up
5BW480
Cop 1.13
GHz/133
40.0
10x-12x-16x DVD
128 PC
133up
5BW480
Cop 1.13
GHz/133
40.0
10x-12x-16x DVD
128 PC
133up
5BW481
Cop 1.0
GHz/133
40.0
10x-12x-16x DVD
128 PC
133up
5000LA
Celeron 766
MHz
20.0
48x-tray
64 PC
100up
5001LA
Cop 866
MHz/133
30.0
48x-tray
128 PC
133up
CD-RW
5003LAS
Cop 1.0
GHz/133
40.0
10x-12x-16xDVD
256 PC
133up
CD-RW
5002LB
Cel 850
MHz/100
30.0
CD-RW
64 PC
133up
5004LA
Cop 1.0
GHz/133
60.0
48x-tray
192 PC
133up
5004LB
Cop 1.0
GHz/133
40.0
10x-12x-16x DVD
128 PC
133up
5006US
Cel 766
MHz/66
20.0
40x-tray
64 PC
100up
60.0
10x-12x-16x DVD
128 PC
100up
CD-RW
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REQUIREMENTS
5BW462
5009SR
Cop 1.0
GHz/133
Secondary
Drive
128 PC
133up
128 PC
133up
64 PC
133up
CD-RW
CD-RW
5008SR
Cop 933
MHz/133
40.0
48x-tray
128 PC
100up
8xCD-RW
5008US
Cel 800
MHz/100
40.0
40x-tray
128 PC
100up
CD-RW
5010US
Cop 866
MHz/133
40.0
48x-tray
128 PC
100up
CD-RW
5009CL
Cop 1.0
GHz/133
60.0
10x-12x-16x DVD
128 PC
100up
8xCD-RW
5012US
Cop 1.0
GHz/133
40.0
10x-12x-16x DVD
128 PC
100up
8xCD-RW
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1DOT.html [12/9/2002 12:09:47 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
CPU CONTROLS
AND LIGHTS
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REAR CPU
CONNECTORS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
CPU Controls and Lights
1. CD-ROM, CD-RW, or DVD tray
(DVD drive available on selected
models)
2. CD-ROM, CD-RW, or DVD
Activity Light
3. Diskette Drive
4. Diskette Drive Activity Light
5. Diskette Drive Eject Button
6. Hard Drive Activity Light
POWER CORD
SET
REQUIREMENTS
7. CD Storage Tray
8. CD-ROM Manual Eject Hole
9. CD-ROM Manual Eject Button
10. Front I/O USB Connectors
11. Power Activity Light
12. Power On Button
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1Cntrls.html [12/9/2002 12:10:01 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
CPU CONTROLS
AND LIGHTS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Side Access Panel
1. Side Access Panel
2. Side Access Panel Handle
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REAR CPU
CONNECTORS
POWER CORD
SET
REQUIREMENTS
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1SideAP.html [12/9/2002 12:10:09 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
CPU CONTROLS
AND LIGHTS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Internet Keyboard Controls
CD/DVD Control Button Suite
1. CD/DVD
Play/Pause
Button
2. CD/DVD Previous
Track Button
3. CD/DVD Next
Track Button
4. CD/DVD Stop
Button
5. CD/DVD
Load/Eject
Button
6. Volume Down
Button
7. Mute Button
8. Volume Up
Button
9. Sleep Button
Internet Zone Butt ons
1. Instant Search
2. Activity
Community
3. Instant E-mail
4. Instant Internet
5. My Presario
6. Retail/Affinity
Central
7. Entertainment
Ideas
8. Quick Launch
Help Button
9. Quick Launch My
Program Button
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REAR CPU
CONNECTORS
POWER CORD
SET
REQUIREMENTS
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1Keybrd.html [12/9/2002 12:10:13 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
CPU CONTROLS
AND LIGHTS
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
REAR CPU
CONNECTORS
POWER CORD
SET
REQUIREMENTS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Rear CPU Connectors
1. AC Power Connector
2. Voltage Select Switch
3. PS2 Port for Connecting a
Keyboard
4. Two USB Ports for Connecting a
Keyboard or other USB Devices
5. Serial Port
6. Video Port
7. Audio Out (Speakers)
8. Audio In (MP3 Player)
9. Microphone
10. Modem Port
11. Ethernet Port for Connecting to a
Network (if equipped)
12. PS2 Port for Connecting a Mouse
13. Parallel Port
14. Game/MIDI Port
15. Phone Connection
IMPORTANT: Connectors may vary
depending on the model selected.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1RearVu.html [12/9/2002 12:10:18 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MODELS AND
FEATURES
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Power Cord Set Requirements
Requirements
CPU CONTROLS
AND LIGHTS
SIDE ACCESS
PANEL
INTERNET
KEYBOARD
CONTROLS
The power cord set (flexible cord and wall plug) received with the
computer meets the requirements for use in the country where the
computer was purchased.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For more
information on power cord set requirements, contact your Compaq
authorized dealer, reseller, or service provider.
General Requirements
REAR CPU
CONNECTORS
POWER CORD
SET
REQUIREMENTS
The requirements listed below are applicable to all countries:
Country-Specific Requirements
1. The length of the power cord set must be at least 6.00 feet
(1.8 m) and a maximum of 9.75 feet (3.0 m).
2. All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
3. The power cord set must have a minimum current capacity of
10A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country's power system.
4. The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C13 connector, for
mating with the appliance inlet on the Switch Box.
Country
United States
US/Canada
Accredited Agency
UL*
UL and CSA
* The flexible cord must be Type SJT-2 or equivalent, No. 18 AWG, 3-conductor.
The wall plug must be a two-pole grounding type with a NEMA 5-15P (15A, 125V)
or NEMA 6-15P (15A, 250V) configuration.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/1PwrCord.html [12/9/2002 12:10:22 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
TROUBLESHOOTING
TROUBLESHOOTING - INDEX
PAGE
ILLUSTRATED PARTS CATALOG
Clearing CMOS
REMOVAL AND REPLACEMENT
PROCEDURES
Power-On Self Test (POST)
PRODUCT DESCRIPTION
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Configuration
Preparing the computer
Setup
Accessing Compaq Utilities Option
Diagnostic Error Codes
Troubleshooting without Diagnostics
Checklist for Minor Problems
Hardware Installation
Power
USB Ports
Disk Drive
Hard Drive
CD-ROM, CD-RW, and DVD Drive
Resolving Hardware Conflicts
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2main.html [12/9/2002 12:10:43 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
CLEARING CMOS
Clearing CMOS
POWER-ON SELF
TEST
(POST)
If the power-on password is unknown, clearing CMOS will disable
the password and allow the computer to boot.
CONFIGURATION
DIAGNOSTIC
ERROR CODES
TROUBLESHOOTING
WITHOUT
The location of the Real-time clock (RTC) battery is shown on the
system board illustration below.
1. Complete the preparation for
disassembly procedures.
2. Remove the side access panel.
3. To disable the password, move
DIAGNOSTICS
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2cmos.html [12/9/2002 12:10:46 PM]
from pins 1–2
the jumper
(normal) to pins 2-3 (clear
CMOS) for 10 seconds, then
return to pins 1-2.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Preparation for Disassembly
To prepare the computer for removal and replacement
procedures, complete the following steps:
1. Remove any diskette, compact disc, or tape from the computer.
2. Turn off the computer and any peripheral devices that are
connected to the computer.
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
CAUTION
CAUTION
MEMORY MODULE
HARD DRIVE
DISK DRIVE
Before doing any work inside your computer,
ground yourself by touching a metal part of the
chassis.
3. Disconnect the power cord from the electrical outlet, and then
from the computer.
4. Disconnect all peripheral device cables from the computer.
5. Turn the computer over on its side (open side facing up).
REMOVING THE TOP
DOOR
Important
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
The computer power switch should be turned off
before you disconnect any cables.
During disassembly, label each cable as you remove
it. Be sure to note its position and routing.
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4prepar.html [12/9/2002 12:10:51 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
CLEARING CMOS
Power-On Self Test (POST)
POWER-ON SELF
TEST (POST)
POST is a series of diagnostic tests that run automatically when
the system is turned on. After the computer is turned on, POST
checks the following assemblies to ensure that the computer
system is properly functioning:
CONFIGURATION
DIAGNOSTIC
ERROR CODES
1.
2.
3.
4.
5.
6.
7.
TROUBLESHOOTING
WITHOUT
DIAGNOSTICS
Keyboard
System board
Memory modules
Video memory
Diskette drives
Hard drive
Power supply
POST also detects the type of mass storage devices installed in
the computer.
If POST finds an error in the system, an error condition is
indicated by an audible and/or visual message. The table below
gives explanations of the error codes and a recommended course
of action.
NOTE
An external speaker must be installed into the speaker
output connector to hear the audible beeps during
POST.
Click a link below to find the probable cause and recommended
action for a given error message.
Diskette Drive A
Error
Keyboard Controller
Error
System BIOS
Shadowed
Extended RAM failed
at offset
Keyboard Error
System Cache Error
Failing Bits nnn
Operating System
Not Found
System CMOS
Checksum Back
Fixed Disk 0 or 1
Failure
Parity Check 1
System RAM Failed
at Offset
Fixed Disk
Controller Failure
Parity Check 2
System Timer Error
Incorrect Drive A
Type
Real Time Clock
Error
UMP Upper Limit
Segment
Invalid NVRAM
Media Type
System Battery is
Dead
Video BIOS
Shadowed
POST Messages
Error Message
Probable Cause
Recommended
Action
Diskette Drive A
Error
Drive A: is present,
but fails the BIOS
POST diskette tests.
1. Run Setup.
2. Replace the
signal cables.
3. Replace the
disk drive.
Extended RAM failed
at offset
Extended memory
not working or not
configured properly.
1. Replace the
memory
modules.
2. Replace the
system board.
Failing Bits nnn
nnn is a map of the
bits at the RAM
address which failed
the memory test.
1. Run Setup.
2. Replace the
system board.
Fixed Disk 0 or 1
Hard drive is not
working or not
configured properly.
1. Run Setup.
2. Replace the
signal cable.
3. Replace the
hard drive.
Fixed Disk
Controller Failure
Hard drive is not
working or not
configured properly.
1. Run Setup.
2. Replace the
system board.
Incorrect Drive A
Type
Type of diskette in
drive A not correctly
identified.
1. Run Setup
2. Replace the
disk drive.
Invalid NVRAM
Media Type
Problem with
NVRAM (CMOS)
access.
Replace the system
board.
Return to top
Keyboard Controller
Error
Keyboard, I/O
keyboard controller
(on system board),
or mouse error.
1. Replace the
keyboard.
2. Replace the
mouse.
3. Replace the
system board.
Keyboard Error
Keyboard, I/O
keyboard controller
(on system board),
or mouse error.
1. Replace the
keyboard.
2. Replace the
mouse.
3. Replace the
system board.
Operating System
not found
Operating system
cannot be located
on either drive A or
C.
Parity Check 1
Parity error found in
the system bus.
1. Run Setup.
2. Replace the
memory
modules.
3. Replace the
system board.
Parity Check 2
Parity error found in
the I/O bus.
1. Run Setup.
2. Replace the
ISA board
(modem).
Real Time Clock
Error
Real-time clock fails
BIOS test.
Replace the system
board.
System Battery is
Dead
RTC battery is dead.
1. Replace the
RTC battery.
2. Run Setup.
System BIOS
Shadowed
System BIOS copied
to Shadow RAM.
Status Message: no
action required.
System Cache Error
RAM cache failed
the BIOS test.
Run Setup.
System CMOS
Checksum Bad
CMOS is corrupted
or modified
incorrectly.
Run Setup.
System RAM failed
at Offset, nnn
System RAM failed.
Replace the memory
modules.
System Timer Error
DMA, timers, etc.
Replace the system
board.
UMB Upper Limit
Segment Address,
nnn
Displays the address
of nnn of the upper
limit of Upper
Memory Blocks,
indicating releases
segments of the
BIOS.
Status Message: no
action required.
Video BIOS
Shadowed
Video BIOS
successfully copied
to shadow RAM.
Status Message: no
action required.
Run Setup.
Return to top
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2post.html [12/9/2002 12:11:00 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Side Access Panel
Removal
1. Perform the preparation
procedures.
2. Remove the screws from
the access panel.
3. Locate the latch below the
screw, press down, and
then hold in the down
position.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6sideac.html [12/9/2002 12:11:17 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Side Access Panel, Continued
Removal
4. Grab the handle and slide the
side access panel from the
chassis.
Replacement
Align the tabs on the side access panel
with the chassis slots and slide the side
panel into place.
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6asidac.html [12/9/2002 12:11:21 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
CLEARING CMOS
Configuration
POWER-ON SELF
TEST
(POST)
This section explains how to use Setup and Compaq Utilities
which should be accessed in the following ways:
CONFIGURATION
DIAGNOSTIC
ERROR CODES
TROUBLESHOOTING
WITHOUT
DIAGNOSTICS
1. When a system configuration error is detected during the
POST.
2. To change factory default settings for some of the
computer features.
3. To change the system configuration, which is sometimes
necessary when you add or remove optional hardware.
4. To set system configuration features.
Click a link below to go to the appropriate subsection:
Preparing the Computer
Setup
Accessing Compaq Utilities Options
View System Information (INSPECT)
Preparing the Computer
If you encounter an error condition, complete the following steps
before starting problem isolation procedures:
1. Ensure proper ventilation. The computer should have a 3inch (7.6cm) clearance of the system unit.
2. Turn off the computer and peripheral devices.
3. Disconnect any peripheral devices other than the monitor
and keyboard. Do not disconnect the monitor and
keyboard if you want to test or use it to log error
messages.
4. Install loop-back and terminating plugs for complete
testing.
Setup
The Setup utility gives a snapshot of the computer's hardware
configuration, aids in troubleshooting, and sets custom features.
Setup recognizes a new internal component or an external device
and automatically updates the configuration screens. Use the
Setup utility to:
1. Modify settings for audio, storage, power management,
communications, and input devices.
2. Get an overall picture of the computer's hardware
configuration.
3. Verify configuration parameters in determining problems.
4. Set time and date.
Running Setup
To access the Setup utility, turn on the computer and press the
F10 key when the Compaq logo appears on your screen.
NOTE
The actual menu displayed on your computer may
vary slightly, depending on your configuration.
Return to top
Accessing Compaq Utilities Options
This section provides information about the menu options
accessible from the Compaq Utilities menu.
Create a Compaq Utilities Disk
A Compaq Utilities disk must be created to troubleshoot the
system. To create the disk, complete the following steps:
1. Insert the QuickStore CD into the CD drive.
2. From the Windows desktop, click on Start, then
Programs, then Windows Explorer.
3. Click on the CD drive icon.
4. Double-click on the PCdiags folder.
5. Insert a disk in the disk drive.
6. Double-click on the QRST5.exe icon.
7. Press Enter when the QuickStore label appears.
8. After the CD has completed copying to the disk, eject the
QuickStore CD.
Running Compaq Utilities
To run Compaq Utilities, turn on or reboot the computer with the
Compaq Utilities disk in the disk drive. The menu will appear on
your screen.
View System Information (INSPECT)
The View System Information (INSPECT) utility provides
information about the system once it is configured. INSPECT
operates with MS-DOS and provides information about the
operating system, including:
1.
2.
3.
4.
5.
6.
7.
Contents of the operating system startup files
Current memory configuration
ROM version
Type of processor and coprocessor
Diskette and hard drives
Active printer and communication interfaces
Modem
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2config.html [12/9/2002 12:11:27 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
SPECIFICATIONS
CLEARING CMOS
Diagnostic Error Codes
POWER-ON SELF
TEST
(POST)
Diagnostic error codes occur if the system recognizes a problem
while running the program. These error codes help identify
possibly defective subassemblies.
CONFIGURATION
Tables listed on this page give possible error code and
descriptions of the required action to resolve the error condition.
DIAGNOSTIC
ERROR CODES
TROUBLESHOOTING
WITHOUT
IMPORTANT
DIAGNOSTICS
Retest the sytem after completing each step. If the
problem is resolved, do not proceed with the
remaining diagnostic tests.
For assistance in the removal and replacement of a particular
subassembly, see Removal and Replacement Procedures.
100-xx
Processor
600-xx
Disk
drive
3200-xx
Audio
200-xx
Memory
1100-xx
Serial
3300-xx
CD or
DVD
300-xx
Keyboard
1200-xx
Modem
xxxx-xx
CD-RW
DVD
400-xx
Parallel
(printer)
1700-xx
Hard
drive
8600-xx
Pointing
device
interface
500-xx
Monitor
2400-xx
Video
Processor Error Codes
Error
Code:
Description:
Recommended Action:
101-xx
CPU test failed
Replace the system board
and retest.
102-xx
Processor error
103-xx
DMA controller failed
104-xx
Interrupt controller failed
The following step applies to
error code 103-xx through
106-xx:
105-xx
Port error
Replace the system board.
106-xx
Keyboardcontroller selftest failed.
107-xx
CMOS RAM test failed
108-xx
CMOS interrupt test
failed
1. Run Setup and retest.
2. Replace the processor
and retest.
The following steps apply to
error code: 107-xx through
109-xx:
1. Replace the
battery/clock module
and retest.
2. Replace the system
board and retest.
109-xx
CMOS clock failed
110-xx
Reprogrammable timer
test failed
111-xx
Refresh detect test failed
112-xx
Speed test failed
113-01
Protected mode test
failed
114-xx
Speaker test failed
1. Verify the speaker
connection.
2. Replace the system
board and retest.
199-xx
Installed devices test
failed
1. Check system
configuration.
2. Verify cable
connections.
3. Check switch settings.
4. Run Compaq Utilities.
5. Replace the system
board and retest.
The following steps apply to
error codes 110-xx through
113-xx:
Replace the system board
and retest.
Return to top
Memory Error Codes
Error
Code:
Description:
200-xx
Invalid memory
configuration
201-xx
Memory machine ID test
failed
202-xx
Memory system ROM
checksum failed
203-xx
Memory write/read test
failed
204-xx
Memory address test
failed
206-xx
Increment pattern test
failed
210-xx
Random pattern test
failed
Recommended Action:
1. Verify memory
module value
compatibility.
2. Reinsert memory in
the correct location.
The following steps apply to
error codes 201-xx and 202xx:
1. Flash the ROM and
retest.
2. Replace the memory
and retest.
3. Replace the system
board and retest.
The following steps apply to
error codes 203-xx through
210-xx:
1. Remove one memory
module at a time until
the error message
stops.
2. Replace other
removed modules one
at a time, testing
each to ensure the
error does not return.
3. Replace the system
board and retest.
Return to top
Keyboard Error Codes
Error
Code:
Description:
Recommended Action:
301-xx
Keyboard short test,
8042 self-test failed
The following steps apply to
error codes 301-xx through
304-xx:
302-xx
Keyboard long-test failed
303-xx
Keyboard LED test, 8042
self-test failed
304-xx
Keyboard typematic test
failed
1. Check the keyboard
connection. If
disconnected, turn the
computer off and
connect the keyboard.
2. Replace the keyboard
and restart.
3. Replace the system
board and retest.
Return to top
Monitor (VGA or Flat-Panel) Error Codes
Error
Code:
Description:
Recommended Action:
501-xx
Video controller test
failed
The following step applies to
error codes 501-xx through
516-xx:
502-xx
Video memory test failed
503-xx
Video attribute test failed
504-xx
Video character set test
failed
505-xx
Video 80 x 25 mode 9 x
14 character cell test
failed
506-xx
Video 80 x 25 mode 9 x
14 character cell test
failed
507-xx
Video 40 x 25 mode test
failed
508-xx
Video 320 x 200 mode
color set 0 test failed
509-xx
Video 320 x 200 mode
color set 1 test failed
510-xx
Video 640 x 200 mode
test failed
511-xx
Video screen memory
page test failed
512-xx
Video gray scale test
failed
514-xx
Video white screen test
failed
516-xx
Video noise pattern test
failed
Replace the system board
and retest.
Return to top
Diskette Drive Error Codes
Error
Code:
Description:
Recommended Action:
600-xx
Disk ID drive types test
failed
The following steps apply to
error codes 600-xx through
698-xx:
601-xx
Disk format failed
602-xx
Disk read test failed
603-xx
Disk write, read,
compare test failed
604-xx
Disk random seek test
failed
605-xx
Diskette ID media test
failed
606-xx
Disk speed test failed
607-xx
Disk wrap test failed
608-xx
Disk write-protect test
failed
609-xx
Disk reset controller test
failed
610-xx
Disk change line test
failed
694-xx
Pin 34 is not cut on
360KB disk drive
697-xx
Disk type error
698-xx
Disk drive speed not
within limits
699-xx
Disk drive/media ID
error
1. Replace the disk and
retest.
2. Check and/or replace
the disk power and
signal cables and
retest.
3. Replace the disk drive
and retest.
4. Replace the system
board and retest.
1. Replace media.
2. Run Setup.
Return to top
Modem Error Codes
Error
Code:
Description:
Recommended Action:
1201xx
Modem Internal LoopBack Test
The following steps apply to
1201-xx through 1210-xx:
1202xx
Modem Time-Out Error
1203xx
Modem External
Termination Test
1204xx
Modem Auto Originate
Test
1206xx
Dial Multifrequency Tone
Test
1210xx
Modem Direct Connect
Test
1. Refer to modem
documentation
procedures.
2. Check the modem
line.
3. Replace the modem
device.
Return to top
Hard Drive Error Codes
Error
Code:
Description:
Recommended Action:
1700xx
Hard drive ID types test
failed
The following steps apply to
error codes 1700-xx through
1799-xx:
1701xx
Hard drive format test
failed
1702xx
Hard drive read test
failed
1703xx
Hard drive
write/read/compare test
failed
1704xx
Hard drive random seek
test failed
1705xx
Hard drive controller test
failed
1706xx
Hard drive ready test
failed
1707xx
Hard drive recalibration
test failed
1708xx
Hard drive format bad
track test failed
1709xx
Hard drive reset
controller test failed
1710xx
Hard drive park head
test failed
1714xx
Hard drive file write test
failed
1715xx
Hard drive head select
test failed
1716xx
Hard drive conditional
format test failed
1717xx
Hard drive ECC (Error
Correction Code) test
failed
1719xx
Hard drive power mode
test failed
1730xx
Fixed Disk 0 does not
support DMA mode
1731xx
Fixed Disk 1 does not
support DMA mode
1740xx
Fixed Disk 0 failed Set
Block Mode command
1741xx
Fixed Disk 1 failed Set
Block Mode command
1750xx
Fixed Disk 0 failed
Identity command
1751xx
Fixed Disk 1 failed
Identity command
1760xx
Fixed Disk 0 does not
support Block Mode
1761xx
Fixed Disk 1 does not
support Block Mode
1790xx
Disk 0 Configuration
Error
1792xx
Secondary Disk
Controller Failure
1799xx
Invalid hard drive type
failed
1. Run Setup and verify
drive type.
2. Replace the hard
drive data and power
cables and retest.
3. Replace the hard
drive and retest.
4. Replace the system
board and retest.
Return to top
Video Error Codes
Error
Code:
Description:
Recommended Action:
2402xx
Video memory test failed
The following steps apply to
error codes 2402-xx through
2456-xx:
2403xx
Video attribute test failed
2404xx
Video character set test
failed
2405xx
Video 80 x 25 mode 9 x
14 character cell test
failed
2406xx
Video 80 x 25 mode 8 x
8 character cell test
failed
2407xx
Video 40 x 25 mode test
failed
2408xx
Video 320 x 200 mode
color set 0 test failed
2409xx
Video 320 x 200 mode
test failed
2410xx
Video 640 x 200 mode
test failed
2411xx
Video screen memory
page test failed
2412xx
Video gray scale test
failed
2414xx
Video white screen test
failed
2416xx
Video noise pattern test
failed
2418xx
ECG/VGC memory test
failed
2419xx
ECG/VGC ROM checksum
test failed
2420xx
ECG/VGC attribute test
failed
2421xx
ECG/VGC 640 x 200
graphics (256-color
mode) test failed
2422xx
ECG/VGC 640 x 350 16color set test failed
2423xx
ECG/VGC 640 x 350 64color set test failed
2424xx
ECG/VGC monochrome
text mode test failed
2425xx
640 x 480 graphics test
failure
2431xx
640 x 480 graphics test
failure
2432xx
320 x 200 graphics (256color mode) test failed
2448xx
Advanced VGA Controller
test failed
2451xx
132-column Advanced
VGA test failed
2456xx
Advanced VGA 256-color
test failed
2468xx
Advanced VGA BitBLT
test
2477xx
Advanced VGA datapath
test
2478xx
Advanced VGA BitBLT
test
2480xx
Advanced VGA Linedraw
test
1. Run Setup.
2. Replace the system
board and retest.
The following steps apply to
error codes 2468-xx through
2480-xx:
1. Run Setup.
2. Replace the system
board and retest.
Return to top
Audio Error Codes
Error
Code:
Description:
Recommended Action:
3206xx
Audio System Internal
Error
Replace the system board
and retest.
Return to top
CD or DVD Drive Error Codes
Error
Code:
Description:
Recommended Action:
3301xx
CD or DVD drive read
test failed
The following steps apply to
error codes 3301-xx through
3305-xx and 66xx-xx:
1. Replace the CD or
DVD disk and retest.
2. Check the jumper
settings on the CD or
DVD drive.
3. Check and/or replace
the power and signal
cables and retest.
4. Replace the CD or
DVD drive and retest.
3305xx
66xxxx
Return to top
Pointing Device Interface Error Codes
Error
Code:
Description:
8601xx
Pointing Device Interface
test failed
Recommended Action:
1. Replace with a
working device and
retest.
2. Replace the system
board and retest.
Return to top
CD-RW Drive Error Codes
Error
Code:
Description:
Recommended Action:
xxxxxx
CD-RW drive
The following steps apply to
error codes xxxx-xx through
xxxx-xx:
1.
2.
3.
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2errcod.html [12/9/2002 12:11:46 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
SPECIFICATIONS
CLEARING CMOS
Troubleshooting Without Diagnostics
POWER-ON SELF
TEST
(POST)
This section describes some simple, preliminary tests and
guidelines for troubleshooting the computer.
CONFIGURATION
If you encounter some minor problems with the computer or
software application, go through the following checklist for
possible solutions before running any of the diagnostic utilities:
DIAGNOSTIC
ERROR CODES
TROUBLESHOOTING
WITHOUT
DIAGNOSTICS
Checklist for Solving Minor Problems:
1.
2.
3.
4.
5.
6.
Is the computer connected to the working power outlet?
Is the computer turned on and the power light illuminated?
Are all the cables connected properly and seated?
Are all of the necessary device drivers installed?
Is the CONFIG.SYS file correct?
Is the AUTOEXEC.BAT file (MS-DOS) or STARTUP.CMD file
correct?
7. Was a nonbootable diskette loaded in the diskette drive at
power-up?
8. Are all the switch settings correct?
9. Was Computer Setup run after installing options (memory,
disk drives, etc.) and booted before installing industry
standard architecture boards?
Quick checks and possible solutions for problems related to these
topics:
CD Drive
Disk Drive
DVD Drive
Hard Drive
USB Ports
Hardware
Installation
Power
In addition, this section provides information for resolving
hardware conflicts.
CD Drive
Problem
Probable Cause
Possible Solution
Cannot eject
CD is not properly
compact disc (tray- seated in the drive.
load only).
Turn off the
computer, insert a
straightened paper
clip into the
emergency eject hole,
then push firmly.
Slowly pull the tray
out from the drive
until the tray is fully
extended, then
remove the CD.
Cannot read
compact disc.
CD is not properly
seated in the drive.
Eject the CD, then reinsert it, pressing CD
firmly to correctly
seat it in the drive.
CD has been loaded
upside down.
Eject the CD, turn it
over, then reload.
CD may be dirty or
scratched.
Load another CD disc.
Power cycle delay.
After turning the
computer off, wait 30
seconds before
turning the computer
on again.
CD drive is not
connected properly.
Open the computer
and check to see if
the cable is connected
properly.
Proper driver is not
loaded.
Restart the system
and make sure the
drivers are loaded.
CD drive devices
are not detected.
Return to top
DVD Drive
Problem
Probable Cause
Possible Solution
Cannot read DVD
disc.
DVD or CD is not
properly seated in
the drive.
Eject DVD or CD,
press down firmly on
the disc to correctly
seat it in the drive.
DVD or CD has been
loaded upside down.
Eject the disc, turn it
over, then reload.
DVD or CD disc may
Load another DVD
be dirty or scratched. disc.
DVD does not work
in the DOS mode.
Proper drivers are
not loaded.
Restart the system
and make sure the
DVD drivers are
loaded.
Cannot eject DVD
disc.
The system is in the
Sleep mode.
Press the Power
button to bring the
system down full
power, then eject the
DVD.
The DVD, disk, or
hard drive was active
when attempting to
eject the DVD.
Wait until all drive
activity ends (the
CD/hard drive light
and disk drive light
will go out), then
eject the DVD.
DVD disc is not
properly seated in
the drive.
Turn off the
computer, insert a
straight pin into the
emergency eject hole,
then push firmly.
Slowly pull the tray
out from the drive
until fully extended,
then remove the DVD
disk.
DVD drive is not
connected properly.
Open the computer
and check to see that
the cable is connected
properly.
Incorrect driver is
installed.
Ensure the correct
driver is installed in
computer.
Drive has been
changed.
Make sure the jumper
setting is set for
"Setup."
Proper drivers are
not loaded.
Restart the system
and make sure the
DVD drivers are
loaded.
DVD drive devices
are not detected.
Return to top
Hard Drive
Problem
Probable Cause(s)
Possible Solution
Hard drive error
occurs.
Hard disk has bad
sectors or has failed.
Run Computer Setup.
Reformat the hard
disk.
Drive not found.
Cable could be loose.
Check cable
connections.
Disk transaction
problem.
Either the directory
structure is bad or
there is a problem
with a file.
From the desktop
click on the Start
menu, Programs,
Accessories, System
Tools, and check for
problems. If problems
exist, run Scandisk
and checkmark the
"Automatically fix
errors" box at the
bottom to correct the
problems. If a large
enough allocation unit
is found, click on the
Start button and
choose Programs,
Accessories, System
Tools, Disk
Defragmenter.
Nonsystem disk
message.
The system is trying
to start from a disk
that is not bootable.
Remove the disk from
the disk drive.
The system is trying
to start from the
hard drive but the
hard disk is
damaged.
Insert a bootable disk
into the disk drive
and restart the
computer with
Ctrl+Alt+Del.
Disk boot is disabled
in Computer Setup.
Run Computer Setup
and enable disk
drives.
The hard disk files
may be fragmented.
From the desktop
click on the Start
menu, Programs,
Accessories, System
Tools, and check for
problems. If problems
exist, run Scandisk
and checkmark the
"Automatically fix
errors" box at the
bottom to correct the
problems. If a large
enough allocation unit
is found, click on the
Start button and
choose Programs,
Accessories, System
Tools, Disk
Defragmenter.
Hard drive
operation seems
slow, or hard drive
activity light is not
on, or stays on
without blinking.
Return to top
Hardware Installation
Problem
Probable Cause(s)
Possible Solutions
A new device is not
recognized as part
of the computer
system.
When the system
advised you of
changes to the
configuration, you
did not save the
changes.
Reboot the computer
and follow the
instructions for saving
changes.
The system may not
have automatically
recognized the new
device.
Run Computer Setup
and identify the
device.
The cables for the
new external device
are loose, or the
power cables are
unplugged.
Check all cables.
The power switch for
the new external
device is not turned
on.
Turn off the
computer, turn on the
external device, and
then turn on the
computer to integrate
the new modes of the
computer.
Return to top
Power
Problem
Possible Solution
Computer will not turn on.
Ensure that the computer is
connected to a power supply.
Computer does not
The real-time clock (RTC) battery
automatically display the date may need to be replaced. Click
and time.
Here for replacement procedures.
Computer does not beep
during POST.
The speaker volume may be
turned down. Select the Volume
option from the Control Panel
and adjust the volume.
Computer powered off
automatically.
The unit temperature may have
been exceeded. Check for
function and blockage.
Return to top
USB Ports
Problem
Probable Cause(s)
Possible Solution
Port 3 cannot work
with any slow
speed devices.
The device is plugged Check to see if the
into the wrong port.
keyboard is plugged
into Port 3.
Ensure that the USB
device is properly
inserted into the port.
USB device does
not work with the
system.
The USB device and
the system may use
different USB
architectures.
Ensure that the USB
device and the
system have the
same USB
architecture. (UHCIcompliant devices
only work with a UHCIcompliant system,
and OHCI-compliant
devices will only work
with a OHCIcompliant system.)
Return to top
Disk Drive
Problem
Probable Cause(s)
Possible Solution
Disk drive light
stays on.
Disk may be
damaged.
Remove disk, insert
new diskette into disk
drive.
Disk may be installed Remove disk, reinsert
incorrectly
into disk drive.
Software program
may be damaged.
Disk drive cannot
write to a diskette.
Disk drive cannot
read a diskette.
Check the program
disk.
Disk is not formatted. Format disk.
Important:
Formatting removes
all saved information
from the disk.
Disk is writeprotected.
Either use another
disk that is not writeprotected or move the
write-protect tab on
the disk to the
unprotected position
Writing to the wrong
drive.
Check the drive letter
in your path
statement.
Not enough space is
left on the disk.
Remove disk, insert
new disk into disk
drive.
Disk is not formatted. Format disk.
Using the wrong disk
type for the drive
type.
Use a disk that is
compatible with the
drive.
Reading the wrong
drive.
Check the drive letter
in your path
statement.
Disk drive has been
Run Computer Setup
disabled by Computer and enable the disk
Setup.
drive.
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2troubl.html [12/9/2002 12:12:00 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 7000 Series
Computers
December 9, 102
TROUBLESHOOTING
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS
CATALOG
REMOVAL AND
REPLACEMENT PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Clearing CMOS
Resolving Hardware Conflicts
Power-On Self
Test
(POST)
Hardware conflicts occur when two or more peripheral devices
attempt to use the same hardware resources. I/O addresses,
interrupts, and DMA channels are the most common hardware
resources used by peripheral devices.
Configuration
Diagnostic error
codes
Troubleshooting
without
diagnostics
Base I/O
address
Interrupt
8-bit DMA
220H
IRQ 5
Channel 1
When different peripheral devices use the same hardware resources
at the same time, the devices and/or the system may not function
properly. You can resolve hardware conflicts by ensuring that no
devices are configured to use the same hardware resources. These
resources can either be dipswitch or jumper settings on the
peripheral card or software configurable resources. The Computer
Setup selection of your Compaq Utilities allows you to view and
modify the settings for the peripheral devices factory installed in your
computer. Refer to the User's Guide for the particular peripheral
cards you wish to install for information on how to view and select
their settings.
To resolve hardware conflicts:
1. Change the hardware settings of your audio card or other
peripheral card in your system. Make sure the peripheral card
is using any settings used by the factory-installed devices.
2. If you are unsure of the settings of the peripheral cards, you
can isolate the source of the problem by temporarily removing
all cards not manufactured by Compaq, or resetting the
default settings and running Compaq Utilities. After that, add
the cards back one at a time until the card that is causing the
conflict is found.
Return to Troubleshooting without diagnostics
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2hardwr.html [12/9/2002 12:12:11 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
TROUBLESHOOTING
ILLUSTRATED PARTS
CATALOG - INDEX PAGE
ILLUSTRATED PARTS CATALOG
Mass Storage Devices
REMOVAL AND REPLACEMENT
PROCEDURES
Cables
PRODUCT DESCRIPTION
JUMPER AND SWITCH INFORMATION
SPECIFICATIONS
Standard & Optional Boards
Fax/Modem
Keyboard
Miscellaneous Parts
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3Main.html [12/9/2002 12:12:25 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Mass Storage Devices
MASS STORAGE
DEVICES
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
KEYBOARDS
MISCELLANEOUS
PARTS
Spare Part Description
1
2
3
Spare Part No.
CD, CD-RW, and DVD Drive
CD-ROM Drive 40x Quartz
191160-001
207619-004
CD-ROM Drive 48x Quartz
214755-001
CD-RW Drive
212408-004
191162-001
DVD Drive 12x Quartz
191164-001
8X CD-RW Drive
190074-001
DVD Drive 16x Quartz
180593-001
Hard Drives
20.0-GB
197799-001
40.0-GB
173342-001
60.0-GB
201527-004
201527-002
201527-001
Disk Drive
1.44-MB Diskette Drive Quartz
Note
191168-001
207614-004
The computer serial number should be provided to
Compaq whenever requesting information or ordering
spare parts.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3massst.html [12/9/2002 12:12:27 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MASS STORAGE
DEVICES
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Cables
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
KEYBOARDS
MISCELLANEOUS
PARTS
December 9, 102
Spare Part Description
Spare Part No.
1
CD/DVD Drive Data Cable
209863-002
207628-004
2
Hard Drive Data Cable
209865-002
207630-004
3
1.44-MB Diskette Drive Cable
(EMEA)
209864-002
207629-004
4
USB Data Cable
202405-001
207631-001
210827-001
5
Front LED/Switch Cable
228575-001
CD Audio Cable (18-inch)
174773-001
Telephone Line
137256-001
Audio Cable
174773-003
207627-004
Power Cord
Spare Part No.
Power Cord
207622-001
Power Cord (Sweden)
292657-111
US/Latin America/Asia
Pacific/Taiwan
142766-001
Austria
238472-005
Denmark/EMEA
292657-081
AC-AU
198292-011
AC-Europe
121259-001
AC-Italy
198292-061
AC-DK
198292-081
AC-AU
238472-005
France/Spain
285810-001
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3cables.html [12/9/2002 12:12:32 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Standard and Optional Boards
MASS STORAGE
DEVICES
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
KEYBOARDS
MISCELLANEOUS
PARTS
Spare Part Description
1
System Board
System Board
2
3
207613-004
191767-003
Memory Module
64-MB 100-MHz Memory Module DIMM
179190-001
128-MB 100-MHz Memory Module DIMM
166966-001
Standard and Optional Boards
Network Interface Board 10/100
4
Spare Part
No.
157045-001
212999-004
Microprocessor/Heatsink Assembly
Processor
Celeron 700
202112-001
202112-002
Cop 933 (133)
180739-001
Cop 1.0 (133)
180738-001
180738-002
180738-004
Cop 1.1 (133)
Not available
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3boards.html [12/9/2002 12:12:36 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MASS STORAGE
DEVICES
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Fax/Modem
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
Spare Part Description
Spare Part No.
KEYBOARDS
56K Modem - Scooter (Latin America
Excluded)
166358-002
Modem - Enduro
207616-004
166386-001
MISCELLANEOUS
PARTS
Modem Adapters
Modem Adapters-International
198293-002
Modem Adapters-Sweden
198294-111
Adapters
RJ11 P55 Adapter
316920-331
RJ11 P55 Adapter (Sweden)
316904-101
RJ11 Adapter (Finland)
304398-351
RJ11 Adapter
304398-181
RJ11 Adapter
316904-081
RJ11 Adapter
304398-051
RJ11 Adapter
304398-011
RJ11 Adapter
158593-031
RJ11 Adapter
316904-061
PTT/ RJ11 Adapter
158593-031
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3faxmod.html [12/9/2002 12:12:40 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MASS STORAGE
DEVICES
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Keyboards
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
KEYBOARDS
MISCELLANEOUS
PARTS
Spare Part Description
Spare Part Number
USB Internet Keyboard (U.S)
207624-004
180190-007
USB Internet Keyboard (U.K)
180190-037
USB Internet Keyboard (France)
180190-057
USB Internet Keyboard (Italy)
180190-067
USB Internet Keyboard (Spain)
180190-077
USB Internet Keyboard (Denmark)
180190-087
USB Internet Keyboard (Norway)
180190-097
USB Internet Keyboard (Sweden)
180190-107
USB Internet Keyboard
(Switzerland)
180190-177
USB Internet Keyboard (Latin
America)
180190-167
USB Internet Keyboard (Belgium)
180190-187
USB Internet Keyboard (Brazil)
180190-207
USB Internet Keyboard (Thailand)
180190-287
USB Internet Keyboard (Finland)
180190-357
USB Internet Keyboard (China)
180190-AB7
USB Internet Keyboard
(International)
180190-B37
USB Internet Keyboard
207620-004
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3keybrd.html [12/9/2002 12:12:43 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
ILLUSTRATED PARTS CATALOG
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
MASS STORAGE
DEVICES
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Miscellaneous Parts
CABLES
STANDARD &
OPTIONAL
BOARDS
FAX/MODEM
KEYBOARDS
MISCELLANEOUS
PARTS
Spare Part Description
Spare Part No.
1 (2) Hard Drive Brackets (4 Screws)
210833-001
195413-002
2 Power Supply 200/250
153652-002
3 Power Switch w/Holder
199354-001
4 3.5 inch Drive Rails (left/right side)
199353-002
210005-004
5.25 inch Drive Rails (left/right side)
210830-002
207625-004
5 Front I/O Assembly
209866-001
207624-004
6 Chassis Assembly w/side door
210828-001
199352-002
Front Bezel Assembly
210834-001
199357-002
207626-004
Trim Ring (Top Door)
210835-002
199355-003
Lower Trim Ring (CD Storage Door)
210832-001
199356-002
Trim Ring Lock
202455-001
210831-001
Mouse
195503-001
207621-004
Return Kit
202132-001
207623-004
Power Cord
142766-001
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3misc.html [12/9/2002 12:12:46 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
REMOVAL & REPLACEMENT
PROCEDURES - INDEX PAGE
This section provides general service information for
Compaq Series Personal Computers. Adherence to the
procedures and precautions described in this section is
essential for safe and proper service.
Electrostatic
Discharge
Removing the Top Door
Service
Considerations
Removing the CD Storage
Door
(Lower Front Panel)
Preparation for
Disassembly
Opening the CD Storage
Door
Serial Number
Expansion Card
Optical and Mass Storage
Devices
CD, CD-RW and/or DVD drive
Hard Drive
Disk Drive
Memory Module
Power Supply Assembly
Hard drive
Front I/O Board
Diskette drive
System Board and
Components
RTC Battery
Microprocessor/Heatsink
Assembly
Side Access Panel
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4Main.html [12/9/2002 12:12:53 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Electrostatic Discharge
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs. An
electronic device exposed to electrostatic discharge (ESD) may
not be affected at all and will work perfectly throughout a
normal cycle. Or it may function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
Networks built into many integrated circuits provide some
protection, but in many cases, the discharge contains enough
power to alter device parameters or melt silicon junctions.
Generating Static
MEMORY MODULE
The table below shows the different amounts of static electricity
generated by different activities.
HARD DRIVE
Relative Humidity
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
Event
10%
40%
55%
Walking across
carpet
35,000 V
15,000 V
7,500 V
Walking across
vinyl floor
12,000 V
5,000 V
3,000 V
Motions of
bench worker
6,000 V
800 V
400 V
Removing DIPS
from plastic
2,000 V
tubes
700 V
400 V
Removing DIPS
11,500 V
from vinyl trays
4,000 V
2,000 V
Removing DIPS
14,500 V
from Styrofoam
5,000 V
3,500 V
Removing
bubble pack
from PCBs
26,000 V
20,000 V
7,000 V
Packing PCBs in
21,000 V
foam-lined box
11,000 V
5,000 V
NOTE: 700 volts can degrade a product
Preventing Electrostatic Damage to Equipment
Many electronic components are sensitive to ESD. Circuitry
design and structure determine the degree of sensitivity. The
following proper packaging and grounding precautions are
necessary to prevent damage:
1. Protect all electrostatic parts and assemblies with
conductive or approved containers or packaging.
2. Keep electrostatic sensitive parts in their containers until
they arrive at static-free stations.
3. Place items on a grounded surface before removing them
from their container.
4. Always be properly grounded when touching a sensitive
component or assembly.
5. Place reusable electrostatic-sensitive parts from
assemblies in protective packaging or conductive foam.
Use transporters and conveyors made of antistatic belts and
metal roller bushings. To avoid static charging, mechanized
equipment used for moving materials must be wired to ground.
When grounding is not possible, use an ionizer to dissipate
electric charges.
Preventing Damage to Drives
To prevent static damage to hard drives, use the following
precautions.
1.
2.
3.
4.
Handle drives gently, using static-guarding techniques.
Store drives in the original shipping containers.
Avoid dropping drives from any height onto any surface.
Handle drives on surfaces that have at least one inch of
shock-proof foam.
5. Always place drives PCB assembly side down on the
foam.
Grounding Methods
The method for grounding must include a wrist strap or a foot
strap at a grounded workstation. When seated, wear a wrist
strap connected to a grounded system. When standing, use
footstraps and a grounded floor mat.
Static-Shielding Protection Levels
Method
Antistatic
Plastic
Carbon-Loaded
Plastic
Metallized
Laminate
Voltages
1,500
7,500
15,000
Grounding Workstations
To prevent static damage at the workstation, use the following
precautions:
1. Cover the workstation with an approved static-dissipative
material. Provide a wrist strap connected to the work
surface and use properly grounded tools and equipment.
2. Use static-dissipative mats, heel straps, or air ionizers to
give added protection.
3. Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCB laminate. Handle them
only at static-free workstations.
4. Avoid contact with pins, leads, or circuitry.
5. Turn off power and input signals before inserting and
removing connectors or test equipment.
6. Use fixtures made of static-safe materials when fixtures
must contact dissipative surfaces directly.
7. Keep work area free of nonconductive materials such as
ordinary plastic assembly aids and Styrofoam.
8. Use field service tools, such as cutters, screwdrivers, and
vacuums that are conductive.
9. Use a portable field service kit with a static dissipative
vinyl pouch that folds out of a work mat. Also use a wrist
strap and a ground cord for the work surface. Ground the
cord to the chassis of the equipment undergoing test or
repair
Ground Equipment
Use the following equipment to prevent static electricity damage
to the equipment:Wrist Straps are flexible straps with a
minimum of 1 megohm plus or minus 10% resistance to the
ground cords. To provide proper ground, a strap must be worn
snugly against the skin. On grounded mats without banana-plug
connectors, connect a wrist strap to the mat with alligator clips.
Heelstraps/Toestraps/Bootstraps can be used at standing
workstations and are compatible with most types of boots and
shoes. On conductive floors or dissipative floor mats, use them
on both feet with a minimum of 1 megohm resistance between
operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
Recommended Materials and Equipment
Other materials and equipment that are recommended for use
in preventing static electricity include:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Antistatic tape
Antistatic smocks, aprons, or sleeve protectors
Conductive bins, and other assembly or soldering aids
Conductive foam
Conductive tabletop workstations with ground cord of 1
megohm of resistance
Static dissipative table or floor mats with a hard tie to
ground
Field service kits
Static awareness labels
Wrist straps and footwear straps providing 1 megohm
plus or minus 10% resistance
Material handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Metal tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes
http://h18000.www1.hp.com/athome/support/msgs/bmw400/2electr.html [12/9/2002 12:12:56 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Tool Requirements
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
1.
2.
3.
4.
Phillips screwdriver
Needle-nose pliers
Flathead screwdriver
Compaq Utilities software
Screws
The screws used in these products are not interchangeable. If
an incorrect screw is used during the reassembly process, it
could cause damage to the unit. Compaq strongly recommends
that all screws removed during the disassembly process be kept
with the corresponding part that was removed, then returned to
their proper locations.
MEMORY MODULE
HARD DRIVE
Important
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
As each subassembly is removed from the
computer, it should be replaced away from the work
area to prevent damage.
Cables and Connectors
Most cables used throughout the unit are ribbon cables. These
must be handled gently to avoid damage. Apply only the
tension required to seat or unseat the cable insertion or
removal from the connector. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing the cables, and ensure that they cannot be caught or
snagged by parts being removed.
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
CAUTION
When servicing these computers, ensure that
cables are placed in their proper location during
the reassembly process. Improper cable
placement can cause severe damage to the
unit.
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
Ribbon Cable Positions Index
CD/CD-RW, and DVD
Power Button
Disk Drive
Front I/O Board
Hard Drive
Power Supply Assembly
http://h18000.www1.hp.com/athome/support/msgs/bmw400/3servic.html [12/9/2002 12:13:06 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: CD/CD-RW, and DVD
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the CD, CD-RW, and/or
DVD Drive to the system board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4CDCbl.html [12/9/2002 12:13:10 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: Diskette Drive
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the Disk Drive to the
system board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4DskCbl.html [12/9/2002 12:13:19 PM]
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4HDCbl.html
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: Hard Drive
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the Hard Drive to the
system board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4HDCbl.html [12/9/2002 12:13:30 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: Power Button
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the Power Button to the
system board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4PwrBCb.html [12/9/2002 12:13:36 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: Front I/O Board
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the Front I/O Board
(USB connector) to the system
board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4BBCbl.html [12/9/2002 12:13:40 PM]
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4PwrSCb.html
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Service Considerations
Cable Positions: Power Supply Assembly
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
This image indicates the cable
routing for the Power Supply
Assembly to the system board.
Return to Service Considerations
Index
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/4PwrSCb.html [12/9/2002 12:13:47 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Serial Number
Provide Compaq with the computer serial number whenever
requesting information or ordering spare parts. The serial
number is located directly above the rear connectors.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/5serial.html [12/9/2002 12:14:02 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Expansion Card (Modem or Network
Interface Card)
SERVICE
CONSIDERATIONS
Removal
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
1. Perform the
preparation
procedures.
2. Turn the computer
on its side (open
side facing up)
and locate the
expansion card(s).
3. Remove the screw
securing the
expansion card.
4. Pull the expansion
card using a
gentle rocking
motion from the
connector on the
system board.
Replacement
Important:
The
expansion
card rear
connector
must be
properly
inserted
into the
rear chassis
slot to
ensure the
card is
properly
seated into
the
connector
on the
system
board.
1. Align the card with
connector on the
system board and
rear connector
slots on the
chassis.
2. Replace the screw
to secure the
expansion card to
the chassis.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/8expcrd.html [12/9/2002 12:14:16 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Memory Module
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/9memmod.html [12/9/2002 12:14:21 PM]
Removal
1. Perform the
preparation
procedures.
2. Pull down and
on
outward
the release
latches found at
each end of the
memory module.
3. Lift the memory
from
module
the system board
slot.
Replacement
1. Ensure that the
at
latches
each end of the
memory modules
are released.
2. Align the
memory module
with the memory
slot.
3. Push the module
carefully and
firmly into the
slot, ensuring
that the latches
at each end snap
into place.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Hard Drive
Removal
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Remove the screw
securing the hard drive
bracket to the chassis
wall.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10hardr.html [12/9/2002 12:14:26 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Hard Drive, Continued
Removal
4. Lift the hard drive
bracket from the bottom
PREPARATION FOR
DISASSEMBLY
toward the interior of
the chassis.
5. Slide the hard drive
SERIAL NUMBER
(with hard
bracket
drive attached) from the
chassis slots to remove
it.
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10ahard.html [12/9/2002 12:14:28 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Hard Drive, Continued
Removal
6. Remove the screw
securing the hard drive
to the hard drive bracket.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
December 9, 102
NextStep
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10bhard.html [12/9/2002 12:14:30 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Hard Drive, Continued
Removal
7. Remove the hard drive from the
hard drive bracket.
Next Step
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10chard.html [12/9/2002 12:14:32 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Hard Drive, Continued
Removal
8. Disconnect the hard drive
data cable using a gentle
rocking motion.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
December 9, 102
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10dhard.html [12/9/2002 12:14:34 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Hard Drive, Continued
Removal
9. Disconnect the hard drive
power cable using a
gentle rocking motion.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Replacement
To replace the hard drive and
bracket, reverse the previous
procedure.
Return to Optical and Mass
Storage Index Page
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/10ehard.html [12/9/2002 12:14:37 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Optical and Mass Storage Devices—Index Page
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/14opdex.html [12/9/2002 12:14:41 PM]
1. CD,CD-RW
and/or DVD
Drive
2. Disk Drive
3. Hard Drive
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the CD, CD-RW and/or DVD Drive
Removal
To remove the CD, CD-RW
and/or DVD drive, complete the
following steps:
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Unlock the front panel
door lock.
4. Open the CD storage
door.
5. Remove the top door.
6. Disconnect the power
cable from the drive.
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
December 9, 102
Next Step
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/14aopdex.html [12/9/2002 12:14:45 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the CD, CD-RW and/or DVD Drive
Removal
7. Disconnect the data cable
from the drive.
PREPARATION FOR
DISASSEMBLY
Next Step
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/14bopdex.html [12/9/2002 12:14:51 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the CD, CD-RW and/or DVD Drive
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
Removal
9. To release the
drive, press
inward on the
SERIAL NUMBER
of
side rails
the drive and pull
SIDE ACCESS PANEL
the drive
from the chassis.
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/14dopdex.html [12/9/2002 12:14:55 PM]
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the CD, CD-RW and/or DVD Drive Rails
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/11cdisk.html [12/9/2002 12:14:59 PM]
Removal
To remove the drive
rails, complete the
following step:
Pull the drive rails from
each side of the drive
using a gentle rocking
motion.
Replacement
To replace the drive
rails, reverse the
previous procedure.
Return to Optical and
Mass Storage—Index
Page
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Disk Drive
Removal
To remove the diskette drive,
complete the following steps:
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Unlock the front panel
door lock.
4. Open the CD storage
door.
5. Remove the top door.
6. Disconnect the data cable
connected to the drive.
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
Next Step
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/11disk.html [12/9/2002 12:15:03 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Disk Drive, Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
Removal
7. Disconnect the
power cable
connected to the
drive.
SERIAL NUMBER
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/11adisk.html [12/9/2002 12:15:08 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Disk Drive, Continued
Removal
8. To release the drive,
press inward on the side
rails
of the drive and
PREPARATION FOR
DISASSEMBLY
pull the drive
the chassis.
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/11bdisk.html [12/9/2002 12:15:10 PM]
from
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Disk Drive Rails
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/11edisk.html [12/9/2002 12:15:12 PM]
Removal
To remove the drive
rails, complete the
following step.
Pull the drive rails using
a gentle rocking motion
from each side of the
drive.
Replace
To replace the drive
rails reverse the
previous procedure.
Return to Optical and
Mass Storage—Index
Page
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Top Door
Removal
1. Perform the preparation
procedures.
2. Remove the side access pane.
3. Rotate the lock to the down
position to unlock the upper front
panel.
SIDE ACCESS PANEL
Next Step
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/12upfrt.html [12/9/2002 12:15:25 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Top Door, Continued
Removal
4. Press the indention located at the
top of the CD Storage door to
open.
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/12dupfr.html [12/9/2002 12:15:28 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Top Door, Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/12aupfr.html [12/9/2002 12:15:30 PM]
Removal
5. Press your fingers
into the indentations
at the bottom of the
. Pull
top door
the top door forward
until the top door
release
tabs
from the slots on
the chassis.
Replacement
To replace the top door,
reverse this procedure.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the CD Storage Door (Lower Front
Panel)
Removal
1. Perform the preparation
procedures.
2. Remove the side access panel.
3. Unlock the upper front panel.
4. Open the CD storage door.
5. Lift the CD storage door slightly
with both hands while pressing
both tabs with your thumbs at
the same time. Lift the CD
storage door to release from the
chassis.
MEMORY MODULE
Replacement
HARD DRIVE
DISK DRIVE
To replace the CD storage door, reverse
this procedure.
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/13cdstr.html [12/9/2002 12:15:34 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Power Supply Assembly
Removal
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Remove the four screws
located at the top of the
rear of the chassis.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/15power.html [12/9/2002 12:15:43 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Power Supply Assembly,
Continued
Removal
PREPARATION FOR
DISASSEMBLY
4. Push the top of the power
supply cable clip
inward and pull the
SERIAL NUMBER
from the
power cable
connector on the system
board.
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Next Step
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/15apowr.html [12/9/2002 12:15:45 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Power Supply Assembly,
Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/15bpowr.html [12/9/2002 12:15:46 PM]
Removal
5. Disconnect the
power supply
power cables
from the CD, CDRW, and/or DVD
drive, disk drive,
and hard drive.
Next Step
http://h18000.www1.hp.com/athome/support/msgs/bmw400/15cpowr.html
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Power Supply Assembly,
Continued
Removal
PREPARATION FOR
DISASSEMBLY
6. Pull the power supply
from the chassis by
moving it slightly inward
and lifting up.
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Replacement
To replace the power supply
assembly, reverse this
procedure.
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/15cpowr.html [12/9/2002 12:15:48 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Front I/O Board
Removal
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Unlock the front panel
door lock.
4. Remove the CD storage
door .
5. Remove the top door.
6. Remove the screw
securing the Front I/O
bracket to the front of
the chassis.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
December 9, 102
Next Step
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/16iobrd.html [12/9/2002 12:15:52 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Front I/O Board, Continued
Removal
7. Remove the USB cable
from the connector on
the system board.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
December 9, 102
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/16aiobd.html [12/9/2002 12:15:56 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Front I/O Board, Continued
Removal
8. Remove the Front I/O
Board from inside the
chassis.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
December 9, 102
Replacement
To replace the Front I/O
bracket, reverse these
procedures.
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/16biobd.html [12/9/2002 12:15:58 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
System Board Components—Index Page
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/17sydex.html [12/9/2002 12:16:07 PM]
System Board
Microprocessor/Heatsink
Assembly
Intel (Socket 370)
RTC battery
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the System Board
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
Removal
1. Perform the
preparation
procedures.
2. Remove the side
access panel.
3. Remove the
memory module.
4. Remove the
microprocessor /
heatsink
assembly.
5. Remove the
expansion
card(s).
6. Disconnect the
power supply
from the system
board.
7. Disconnect the
Front I/O (USB)
cable from the
system board.
8. Disconnect the
hard drive, disk
drive, CD-RW, CDROM, and/or DVD
drive data cables
from the system
board.
Next Step
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/17asybd.html [12/9/2002 12:16:10 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the System Board, Continued
Removal
9. Disconnect the power button
cable from the system board.
Next Step
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/17bsybd.html [12/9/2002 12:16:16 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the System Board, Continued
Removal
9. Remove six screws from
the system board
PREPARATION FOR
DISASSEMBLY
Next Step
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/17fsybd.html [12/9/2002 12:16:21 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the System Board, Continued
Removal
11. Remove the system
board from the chassis.
PREPARATION FOR
DISASSEMBLY
Replacement
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
To replace the system board,
reverse the previous procedure.
Return to System Board
Components—Index page
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/17hsybd.html [12/9/2002 12:16:24 PM]
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19proce.html
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the Intel (Socket 370)
Microprocessor/Heatsink Assembly
Removal
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Disconnect the fan cable
from the system board.
Next Step
The microprocessor may still be hot if the computer was
WARNING recently used. Allow the microprocessor to cool before
removing.
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19proce.html [12/9/2002 12:16:27 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Intel (Socket 370)
Microprocessor/Heatsink Assembly, Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19bproc.html [12/9/2002 12:16:29 PM]
Removal
5. Remove the clip
holding the
microprocessor /
heatsink assembly
by pushing down
on the tab
and pushing
outward on the
bottom portion of
the tab
release.
Next Step
to
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Removing the Intel (Socket 370)
Microprocessor/Heatsink Assembly, Continued
Removal
5. Lift the microprocessor / heatsink
assembly from the
microprocessor interface.
SERIAL NUMBER
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19dproc.html [12/9/2002 12:16:31 PM]
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19aproc.html
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the Intel (Socket 370)
Microprocessor/Heatsink Assembly, Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19aproc.html [12/9/2002 12:16:34 PM]
Removal
4. Lift up the lever
that holds the
microprocessor to
the
microprocessor
interface. Lift the
microprocessor
from the
chassis.
Replacement
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
INFORMATION
SPECIFICATIONS
Replacement
IMPORTANT: Replace the
thermal pad only when
replacing the system
board.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
1. Turn the heatsink
over and place it on
a flat surface.
Locate the old
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
on
thermal pad
the bottom of the
heatsink.
MEMORY MODULE
Next Step
HARD DRIVE
REMOVING THE TOP
DOOR
ILLUSTRATED PARTS CATALOG
Replacing the Microprocessor/Heatsink
Assembly
SERVICE
CONSIDERATIONS
DISK DRIVE
December 9, 102
The microprocessor assembly should be replaced on
IMPORTANT the system board before securing the system board
into the chassis.
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19cproc.html [12/9/2002 12:16:36 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Replacing the Microprocessor/Heatsink
Assembly
Replacement
2. Remove the old thermal
pad with a flathead
screwdriver or similar
type scraping tool.
Scrape off any residue
left on the heatsink after
removing the thermal
pad.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
December 9, 102
Next Step
The microprocessor assembly should be replaced on
IMPORTANT the system board before securing the system board
into the chassis.
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19eproc.html [12/9/2002 12:16:38 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Replacing the Microprocessor/Heatsink
Assembly, Continued
SERVICE
CONSIDERATIONS
Replacement
3. Remove the clear
plastic film.
4. Place the new
thermal pad (plastic
film side up) onto
the heatsink in the
same position as the
old thermal pad.
5. With the round
portion of the
screwdriver handle,
rub the top of the
new thermal pad to
ensure that the
entire pad sticks to
the heatsink.
6. Quickly remove the
remaining plastic
film.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
December 9, 102
Next Step
If the new thermal pad is not applied properly,
the microprocessor/ heatsink assembly will not
WARNING
work properly, and you risk damaging the
system board.
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19gproc.html [12/9/2002 12:16:40 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Replacing the Microprocessor/Heatsink Assembly,
Continued
SERVICE
CONSIDERATIONS
Replacement
7. Align the
microprocessor
PREPARATION FOR
DISASSEMBLY
.
properly
8. Place the
microprocessor
into the
microprocessor
interface socket
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
on the system
board. Close the
MEMORY MODULE
to lock
lever
the
microprocessor in
place.
HARD DRIVE
DISK DRIVE
Next Step
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
NOTE
When the microprocessor is properly aligned, it
will drop into place. No force will be needed.
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19hproc.html [12/9/2002 12:16:43 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
December 9, 102
ILLUSTRATED PARTS CATALOG
INFORMATION
SPECIFICATIONS
Replacing the Microprocessor/Heatsink
Assembly, Continued
Replacement
9. Place the heatsink assembly
directly on top of the
microprocessor.
SERIAL NUMBER
Next Step
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19kproc.html [12/9/2002 12:16:45 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Replacing the Microprocessor/Heatsink Assembly,
Continued
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
Replacement
8. Hook the
microprocessor
and
clip
on the side of the
heatsink assembly
to the center tab
on the
microprocessor
interface socket
on the system
board.
MEMORY MODULE
Next Step
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19lproc.html [12/9/2002 12:16:47 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
SERVICE
CONSIDERATIONS
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Replacing the Microprocessor/Heatsink
Assembly, Continued
Replacement
10. Reconnect the heatsink
fan power cable to the
system board.
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
SIDE ACCESS PANEL
Return to System Board
Components Index Page
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/19nproc.html [12/9/2002 12:16:49 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
INFORMATION
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Removing the RTC Battery
SERVICE
CONSIDERATIONS
PREPARATION FOR
DISASSEMBLY
SERIAL NUMBER
Removal
1. Perform the preparation
procedures.
2. Remove the side access
panel.
3. Locate the RTC battery.
SIDE ACCESS PANEL
EXPANSION CARD
(Modem or Network
Card)
MEMORY MODULE
HARD DRIVE
DISK DRIVE
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/21rtc.html [12/9/2002 12:16:52 PM]
Next Step
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
REMOVAL AND REPLACEMENT PROCEDURES
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
ELECTROSTATIC
DISCHARGE
December 9, 102
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
INFORMATION
Removing the RTC Battery, Continued
Removal
SERVICE
CONSIDERATIONS
4. Pull out on the socket lever
PREPARATION FOR
DISASSEMBLY
and lift the RTC
battery
socket.
SERIAL NUMBER
Replacement
SIDE ACCESS PANEL
To replace the RTC battery,
reverse these procedures.
EXPANSION CARD
(Modem or Network
Card)
Return to the System Board
Components—Index Page
MEMORY MODULE
HARD DRIVE
DISK DRIVE
out of the
WARNING
The clock/CMOS lithium battery may explode
if mistreated. Do not abuse. Use only
replacement batteries supplied by Compaq
Computer Corporation.
REMOVING THE TOP
DOOR
REMOVING THE CD
STORAGE DOOR
(Lower Front Panel Open the CD Storage
Door)
OPTICAL AND MASS
STORAGE DEVICES
(CD, CD-RW and/or
DVD Drive, Hard Drive,
Disk Drive)
POWER SUPPLY
ASSEMBLY
FRONT I/O BOARD
SYSTEM BOARD
COMPONENTS
(RTC Battery,
Microprocessor/Heatsink
Assembly)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/21a_rtc.html [12/9/2002 12:16:55 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH INFORMATION
JUMPER AND SWITCH
INFORMATION - INDEX
PAGE
System Board Connectors
Hard Drives
CD and DVD Drive/CD-RW Drive
SPECIFICATIONS
http://h18000.www1.hp.com/athome/support/msgs/bmw400/5main.html [12/9/2002 12:17:04 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
JUMPER AND SWITCH INFORMATION
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
PROCEDURES
SYSTEM
BOARD
System Board Connectors
HARD DRIVES
CD and DVD
DRIVE/
CD-RW DRIVE
Internal Connectors
Function
Description
DIMM Sockets
168 Pin DIMM
PCI Slots
32 Bit PCI Connector
Clear CMOS
3 Pin Header
DIMM Sockets
168 Pin DIMM
PCI Slots
32 Bit PCI Connector
Clear CMOS
3 Pin Header
Sleep Button & LEDs
5 pin 2mm Connector
Battery Socket
2 Pin Socket
IDE Drives
40 Pin Headers, Key 20
Diskette Drive
34 Pin Header
Left & Right Internal Speaker
2 Pin Header
2nd Fan
3 Pin Header, key side
+3.3V Power
6 Pin Header
Power Supply
12 Pin ATPWR Header
External Connectors
Function
Description
Keyboard
Miniature 6 Pin
Mouse
Miniature 6 Pin
Parallel
25 Pin DSUB
Video
15 Pin VGA
Microphone In
Mini Stereo
Line In
Mini Stereo
Line Out
Mini Stereo
4 USB
2 front and 2 in back
Game port
Joystick
2 PS/2
Keyboard and mouse
http://h18000.www1.hp.com/athome/support/msgs/bmw400/5SBconX.html [12/9/2002 12:17:07 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
JUMPER AND SWITCH INFORMATION
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
PROCEDURES
SYSTEM
BOARD
HARD DRIVES
CD and DVD
DRIVE/
CD-RW DRIVE
Hard Drives
Compaq Computer Corporation uses IDE hard disk drives that conform
to two different device I/O implementations. These are Conner mode
and ATA-compatible mode. These two modes are incompatible with
one another.
IMPORTANT
Jumper settings are shown on top of the hard drives.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/5harddr.html [12/9/2002 12:17:12 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
December 9, 102
JUMPER AND SWITCH INFORMATION
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
PROCEDURES
SYSTEM
BOARD
CD and DVD Drive/CD-RW Drive
HARD DRIVES
CD and DVD
DRIVE/
CD-RW DRIVE
CD and DVD Drive
Optical Device Type
CD
Optical Device Speed
X
Optical Device Transfer Rate
2500 - 6000KB/s
Interface
ATAPI
Transport Type
Tray Load
CD-RW Drive
Optical Device Type
CD-RW
Device Recording Speed
4X Max
Device ReWrite Speed
2X Max
Device CD Read Speed
24X Max
Storage Capacity: Data
650 MB
Storage Capacity: Music
74 Minutes
Interface
EIDE/ATAPI
Transport Type
Tray Load
http://h18000.www1.hp.com/athome/support/msgs/bmw400/5cd_dvd.html [12/9/2002 12:17:15 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series Computers
Models: 5BW420, 5BW430, 5BW431, 5BW432, 5BW433, 5BW440, 5BW451, 5BW460, 5BW462,
5BW470, 5BW471, 5BW472, 5BW473, 5BW474, 5BW480, 5BW481, 5000LA, 5001LA, 5003LAS,
5002LB, 5004LA, 5006US, 5009SR, 5008SR, 5008US, 5010US, 5009CL, 5012US
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
>REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
SPECIFICATIONS - INDEX PAGE
This section provides physical, environmental, and
performance specifications for Compaq Presario
Internet PC 7000 Series Computers.
CD-ROM and DVD Drive/CD-RW Drive
Disk Drive
Zip Drive
Fax/Modem
Mouse
Power Supply
System Board
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6main.html [12/9/2002 12:17:20 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
DISK DRIVE
ZIP DRIVE
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
SPECIFICATIONS
CD or DVD Drive/CD-RW Drive
Please select a drive to view specifications:
CD Drive
DVD Drive
CD-RW Drive
CD Drive
FAX/MODEM
MOUSE
ILLUSTRATED PARTS CATALOG
Dimensions
U.S.
Metric
Width
5.75 in
15.01 cm (maximum)
Height
1.67 in
4.29 cm
Depth
8.23 in
20.80 cm
Weight
2.65 lb
1.200 kg
Modes Supported
CD-ROM
Mode 1 and Mode 2
CD-DA
Audio
CD-XA
Mode 2, Form 1 and 2
Photo CD
Multiple Session
Video-CDI
Multiple Session
CD-Plus/CD-Extra/CD
Enhanced
Multiple Session
CD-RW
Multiple Session
Block Size
CD-ROM Mode 1 and
Mode 2 Form 1 (XA)
2048 bytes
CD-ROM Mode 2
2336 bytes
CD-DA
2324 bytes
CD-XA
2324 bytes
Center Hole
1.5 mm diameter
Diameter
120 mm/80mm
Thickness
1.2mm
Track Pitch
1.6mm
Laser
Divergence Angle
53.5 degrees +/- 1.5
degrees
Output Power
0.14 mW (@ objective
lens)
Type
Semiconductor laser
GaAIAs
Wave Length
780nm +/- 25 nm
Access Time
Random
< 95 ms (typical)
Full Stroke
< 190 ms (typical)
Audio Output Level
Line Out
0.7 Vrms ±20%
Headphone
0.6 Vrms ±20%
Cache Buffer
256 KB
Data Transfer Rate
Mode 1
Mode 2
4800 KB/sec
5475 KB/sec
KB.sec (32x)
KB/sec (32x)
Burst
MB/sec
MB/sec
Startup Time
< 5 sec
Stop Time
< 5 sec
Sustained
Return to top
DVD Drive
Dimensions
U.S.
Metric
Width
5.75 in
15.01 cm (maximum)
Height
1.67 in
4.29 cm
Depth
8.23 in
20.80 cm
Weight
1.80 lb
0.90 kg
Modes Supported
Mode 1 and Mode 2
Block Size
2048 bytes
Center Hole
15 mm diameter
Disc Diameter
12 cm, 8 cm
Thickness
1.2 mm
Track Pitch
10.74 µm
Access Time
Random
<180 ms typical
Full Stroke
< 300 ms
Audio Output Level
Line Out
1.0 V (RMS) at 47 kW
Headphone
0.7 V (RMS) at 32 W
Cache Buffer
512 Kb
Data Transfer Rate
Sustained
2705-8115 KB/sec
Burst
Startup Time
< 10 sec
Stop Time
< 2 sec
Return to top
CD-RW Drive
Dimensions
U.S.
Metric
Width
5.75 in
15.01 cm (maximum)
Height
1.67 in
4.29 cm
Depth
8.23 in
20.80 cm
Weight
2.65 lb
1.200 kg
Modes Supported
CD-ROM
Mode 1 and Mode 2
CD-DA
Audio
CD-XA
Mode 2, Form 1 and 2
Photo CD
Multiple Session
Video-CDI
Multiple Session
CD-Plus/CD-Extra/CD
Multiple Session
Enhanced
CD-RW
Multiple Session
Block Size
CD-ROM
2048 bytes
Mode 1 and Mode 2
Form 1 (XA)
CD-ROM Mode 2
2336 bytes
CD-DA
2324 bytes
CD-XA
2324 bytes
Center Hole
1.5 mm diameter
Diameter
120 mm/80mm
Thickness
1.2 mm
Track Pitch
1.6mm
Access Time
Random
< 95 ms
Full Stroke
< 190 ms
Audio Output Level
Line Out
0.7 Vrms ±20%
Headphone
0.6 Vrms ±20%
Cache Buffer
256 KB
Data Transfer Rate
Mode 1
Mode 2
4800 KB/sec
5475 KB/sec
KB/sec (32x)
KB/sec (32x)
Burst
MB/sec
MB/sec
Startup Time
< 5 sec
Stop Time
< 5 sec
Sustained
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6cd_dvd.html [12/9/2002 12:17:23 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
ILLUSTRATED PARTS CATALOG
Disk Drive
Diskette Drive
DISK DRIVE
ZIP DRIVE
Diskette
FAX/MODEM
Size (in)
3.5 (8.89 cm)
High Density
1.44
Light
Green
Height
One-third
Bytes per Sector
512
MOUSE
POWER
SUPPLY
ASSEMBLY
Sectors per Track
SYSTEM
BOARD
December 9, 102
High Density
18
Tracks per Side
High Density
80
Low Density
80
Rotational Speed
300 RPM
Read/Write Heads
2
Average Seek Time (ms)
Track-to-Track
3
Setting Time
15 (Max)
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6diskdr.html [12/9/2002 12:17:37 PM]
SPECIFICATIONS
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
FAX/MODEM
MOUSE
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
ILLUSTRATED PARTS CATALOG
Zip Drive
Zip Drive
DISK DRIVE
ZIP DRIVE
December 9, 102
Total formatted capacity (bytes)
100,663,296
Sector size (bytes)
512
Total number of sectors
196,608
Number of reassignable spare
sectors
252
Seek times (including settling), ms:
Average
29
Track-to-track
5
55
Maximum
Average latency, ms
10
Motor speed, rpm
2941±5%
Motor start time, ms
3000
Track density, tpi
2118
Track width, µm
12
Transfer rate, kb/s:
From disk
Buffer (maximum)
790-1400
3300
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6zipdr.html [12/9/2002 12:17:39 PM]
SPECIFICATIONS
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
FAX/MODEM
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Fax/Modem
Fax/Modem
DISK DRIVE
ZIP DRIVE
December 9, 102
General Description
Support
MOUSE
Supports 56K flex and/or ITU-T V.90.
14400bps send and receive fax modem with
automatic fallback to 12000, 9600, 7200, 4800,
and 2400bps.
Supports fax service Class 1 (EIA/TIA 578).
Supports V.80 video ready modem.
Built-in DTE interface with speed up to 115.2kbps
or 57.6kbps, parallel 16550a UART-compatible
interface.
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
Power Management Registers to PCI Interface.
Data Mode
K56flex and/or ITU-T V.90 56kbits/s for highest
Internet connection rates.
Ultrahigh compression throughput due to parallel
access directly to the host PC.
ITU-T V.34 extended rates 33600bps to 2400bps.
V.32terbo, V.32bis and fallbacks.
TIA/EIA 602 standard for AT command set.
V.42 error correction (LAM and MNP).
V.42bis and MNP Class 5 data compression.
Fax Mode
Fax modem send and receive rates up to
14400bps.
* V.17, V.29, V.27ter, and V.21 channel 2 *
TIA/EIA 578 Class 1 FAX
Error Correction
ITU-T recommended V.42 error correction.
V.42 error correction (LAM and MNP).
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6faxmdm.html [12/9/2002 12:17:41 PM]
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6mouse.html
United States
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
MOUSE
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
SPECIFICATIONS
USB Mouse
Dimensions
FAX/MODEM
ILLUSTRATED PARTS CATALOG
Mouse
DISK DRIVE
ZIP DRIVE
December 9, 102
U. S.
Metric
Weight w/cable
4.59 oz
130 g
Base Resolution
400 dpi
15.8 dpmm
Tracking Speed
(maximum)
10 in/sec
25 cm/sec
0° C to + 40° C
-20° C to + 60° C
32° F to 104° F
4° F to 140° F
Exceeds 300 miles
Exceeds 1 million
operations
Exceeds 483 km
Exceeds 1 million
operations
Height
Length
Width
Temperature
Operating
Non-Operating
Lifetime
Mechanical
Switch
Relative Humidity
10% to 90%, noncondensing at ambient.
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6mouse.html [12/9/2002 12:17:43 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
CD or DVD
DRIVE/
CD-RW DRIVE
FAX/MODEM
MOUSE
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
ILLUSTRATED PARTS CATALOG
SPECIFICATIONS
Power Supply Assembly
Power Supply Assembly
DISK DRIVE
ZIP DRIVE
December 9, 102
Input Specifications
U.S.
Nominal Line Voltage
115 to 230 VAC
Range Input Line
90 to 264 VAC
Frequency Range
47 to 63 Hz AC
Input Current
115V 3.00 AMPS
Input Current
4.5 RMS at Max Load
Output Power
145 Watts
Inrush Current
80 A at 132 VAC (cold start)
Holdup Time
16 ms from zero
Environment
Temperature Range
Operating
10 to +50 C
Non-Operating
-40 to +66 C
Humidity
Operating
20% to 90% RH
Storage
5% to 95% RH
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6power.html [12/9/2002 12:17:45 PM]
Compaq.com - Compaq Presario Maintenance and Service Guide - 5000 Series
United States
December 9, 102
Compaq Presario Internet PC 5000 Series
Computers
SPECIFICATIONS
PRODUCT DESCRIPTION
TROUBLESHOOTING
REMOVAL AND REPLACEMENT
JUMPER AND SWITCH
PROCEDURES
INFORMATION
●
●
●
ZIP DRIVE
●
●
FAX/MODEM
●
General System Specifications
Environmental Requirements
System Interrupts
System I/O
System Memory
System DMA
General System Specifications
MOUSE
POWER
SUPPLY
ASSEMBLY
SYSTEM
BOARD
SPECIFICATIONS
System Board
CD or DVD
DRIVE/
CD-RW DRIVE
DISK DRIVE
ILLUSTRATED PARTS CATALOG
Dimensions
U.S.
Metric/ International
36.6 lbs
11.5 kg
Nominal Line Voltage
115 VAC
230 VAC
Range Line Voltage
90-132 VAC
180-264 VAC
AC Frequency
47 or 63 Hz
50 or 60 Hz
Input Current
4.5 RMS at Max Load
4.5 RMS @ Max Load
145
145
Height
Width
Length
Weight
Shipping Weight
Input Requirements
Power (watts)
Steady State
Return to top
Environmental Requirements
Temperature
Operating
50º to 95º F
10º to 35º C
Shipping
-4º to 140º F
-20º to 60º C
Operating
8% to 90%
8% to 90%
Nonoperating
5% to 95%
5% to 95%
Operating
10,000 ft
3048 m
Nonoperating
30,000 ft
9144 m
Humidity
(noncondensing)
Maximum Altitude
(unpressurized)
Return to top
System Interrupts
Hardware IRQ
System Function
IRQ 0
System timer
IRQ 1
Standard 101/102-Key
or Microsoft Natural
Keyboard
IRQ 2
Programmable
interrupt controller
IRQ 3
ACPI IRQ Holder for
PCI IRQ Steering
IRQ 3
Intel(R) 810e Chipset
Graphics Driver (DC133
FSB133) 4.11.01.1321
IRQ 4
Communications Port
(COM1)
IRQ 5
ACPI IRQ Holder for
PCI IRQ Steering
IRQ 5
Intel 82801AA SMBus
Controller
IRQ 6
Standard Floppy Disk
Controller
IRQ 7
ECP Printer Port (LPT1)
IRQ 8
System CMOS/real
time clock
IRQ 9
SCI IRQ used by ACPI
bus
IRQ 10
MPU-401 Compatible
IRQ 11
ACPI IRQ Holder for
PCI IRQ Steering
IRQ 11
Intel 82801AA USB
Universal Host
Controller
IRQ 12
PS/2 Compatible Mouse
Port
IRQ 13
Numeric data processor
IRQ 14
Primary IDE controller
(dual fifo)
IRQ 14
Intel 82801AA Bus
Master IDE Controller
IRQ 15
Secondary IDE
controller (dual fifo)
IRQ 15
Intel 82801AA Bus
Master IDE Controller
Return to top
System I/O
I/O Address (Hex)
System Function
(Shipping
Configuration)
x0000 - x000F
Direct memory access
controller
X0220 - x022F
Not used
x0010 - x001F
Motherboard resources
x0020 - x003F
Programmable
interrupt controller
x0040 - x0043
System timer
x004E - x004F
Motherboard resources
x0050 - x0052
Motherboard resources
x0060 - x0060
Motherboard resources
x0061 - x0061
System speaker
x0064 - x0064
Motherboard resources
x0070 - x0071
System CMOS/real
time clock
x0072 - x0077
Motherboard resources
x0080 - x008F
Direct memory access
controller
x0090 - x009F
Motherboard resources
x00A0 - x00A1
Programmable
interrupt controller
x00A0 - x00BF
APM
x00C0 - x00DF
Direct memory access
controller
x00E2 - x00E3
DDC2 Registers
x00E4 - x00E5
Master I2C Interface
x00EA - x00EB
Ultra I/O
x00EC - x00EF
Modem configuration
x00F0 - x00FF
Numeric data processor
x0102
Video Controller: POS
102 register
x0170 - x0177
Intel(r) 82801AA Ultra
ATA Controller
x0170 - x0177
Secondary IDE
controller (dual fifo)
x01F0 - x01F7
Intel(r) 82801AA Ultra
ATA Controller
x01F0 - x01F7
Primary IDE controller
(dual fifo)
X0201
Gameport Joystick
X0260 - x0263
Reserved-Modem use
during POST
X0278 - x027F
Reserved-Parallel Port:
x02E8 - x02EF
Reserved-Serial Port
(COM4)
x02F8 - x02FF
FAX/Modem (COM2)??
x0300 - x0301
MPU-401 Compatible
x0370 - x0377
Reserved-Floppy Drive
Controller 2
x0376 - x0376
Intel(r) 82801AA Ultra
ATA Controller
x0376 - x0376
Secondary IDE
controller (dual fifo)
x0378 - x037F
Parallel Port
x03B0 - x03BB
Intel(R) 810e Chipset
Graphics Driver (DC133
FSB133) 4.11.01.1321
x03C0 - x03DF
Intel(R) 810e Chipset
Graphics Driver (DC133
FSB133) 4.11.01.1321
x03F0 - x03F5
Standard Floppy Disk
Controller
x03F6 - x03F6
Intel(r) 82801AA Ultra
ATA Controller
x03F6 - x03F6
Primary IDE controller
(dual fifo)
x03F8 - x03FF
Communications Port
(COM1)
x04D0 - x04D1
Motherboard resources
x0570 - x0776
Alias and more alias
x0778 - x077A
ECP Printer Port (LPT1)
x077B - x0BF6
x0CF8 - x0CFF
PCI bus
x0D70 - x0D77
Alias and more alias
x1000 - x1FFF
Intel 82801AA PCI
Bridge
x2020 - x2027
Primary IDE controller
(dual fifo)
x2020 - x202F
Intel 82801AA Bus
Master IDE Controller
x2028 - x202F
Secondary IDE
controller (dual fifo)
xEE00 - xEE7F
Motherboard resources
xEE80 - xEEBF
Motherboard resources
xEEC0 - xEEDF
Intel 82801AA USB
Universal Host
Controller
xEEE0 - xEEEF
Intel 82801AA SMBus
Controller
x2570 - x46E7
Alias and more alias
x46E8
Video Controller:
Adapter Sleep
x46E9 - xEDFF
Alias and more alias
xEE00 - xEE7F
Motherboard resources
xEE80 - xEEBF
Motherboard resources
Return to top
System Memory
Memory Address
System Function
x00000000 x0009FFFF
System board
extension for ACPI
BIOS
x000A0000 x000AFFFF
Intel(R) 810e Chipset
Graphics Driver
x000B0000 x000BFFFF
Intel(R) 810e Chipset
Graphics Driver
x000E0000 x000FFFFF
System board
extension for ACPI
BIOS
x00100000 x03FFFFFF
System board
extension for ACPI
BIOS
x40000000 x4007FFFF
Intel(R) 810e Chipset
Graphics Driver
x44000000 x47FFFFFF
Intel(R) 810e Chipset
Graphics Driver
xFFB80000 xFFBFFFFF
System board
extension for ACPI
BIOS
System board
xFFF80000 - xFFFFFFFF extension for ACPI
BIOS
Return to top
System DMA
Hardware
System Function
(Default)
DMA 2
Standard Floppy Disk
Controller
DMA 3
ECP Printer Port (LPT1)
DMA 4
Direct Memory Access
Controller
Return to top
http://h18000.www1.hp.com/athome/support/msgs/bmw400/6system.html [12/9/2002 12:17:48 PM]