MULTIQUIP | HTXD6i | Ride-On Trowel Rental – Multiquip Product Information

Ride-On Power Trowels
Hydrostatic and Mechanical Drive Models
www.multiquip.com
Hydrostatic Ride-On Trowels
Raising the bar for performance.
Whiteman hydraulic ride-on power trowels deliver all the features contractors
demand from high performance finishing equipment. Now, with innovative
features such as SmartPitch, Power Management and Cruise Control we
help you get the most performance out of your equipment. These remarkable
machines will help improve your F-numbers and change the way you think about
ride-on trowels.
Ergonomic seat reduce operator
fatigue.
NEW
!
SmartPitch control synchronizes blade pitch of both
rotors with a single touch.
Proportional hydraulic steering helps the operator
move the machine effortlessly across the slab.
Tubular steel tank design improves
flow and cooling of hydraulic fluid.
Service panels provide easy access to
components for maintenance.
Frame design provides operator
with excellent visibility of the
finishing surface.
4 cylinder turbo diesel engine
Six lights are standard for
illuminating night time and
indoor work areas
Integral steps
are provided for
convenience.
Standard “Enduro” trowel blades last up to
50% longer than conventional blades.
Operator’s platform includes a built-in storage
box for hand tools and accessories.
THE STX SERIES
(STXD6i shown. Called-out
features are typical of all
hydrostatic trowels.)
With a span of ten feet, it provides maximum coverage while enabling you to produce floors with consistently superior
levels of flatness. Twin six-blade rotors are driven by a powerful 55-HP* Yanmar turbo diesel engine chosen for its ability to
withstand the tough concrete finishing environment.
Six-Blade Spider
Exclusively on ten-foot STX and HTXD6i
Hydrostatic Trowels.
Achieve 33% more blade contact for the fastest,
flattest finish possible.
Obtain superior maneuverability and control.
Reduce wear on pans and blades due to
outstanding balance and weight distribution.
NEW
!
THE HTXD6i reaches a top rotor speed
of 160 RPM and produces 20% more HP than previous
generations models.
Additional HTX and STX Series Features
NEW! SmartPitch® control allows the operator to synchronize the pitch of both rotors with
the simple touch of a button.
NEW! Power Management senses load and adjusts hydraulic pump stroke to ensure the
unit operates at peak efficiency under all conditions. Eliminates engine bogging under severe
Raised operator's platform includes
loads.
NEW! Cruise Control enables operator to electronically lock in preferred rotor speed and
reduces fatigue.
lockable storage compartment
Hydrostatic drive supplies optimum power to each rotor assembly for reliable performance.
It reduces service costs by eliminating maintenance items such as belts, clutches and
gearboxes.
Non-overlapping rotors are powered by independent drive motors that consistently deliver
the high torque required for pan applications and the high speed for final finishing.
Retardant spray system is actuated by controls located on the steering handles for uniform
coverage of the slab surface.
Adjustable seat features armrests and provides essential back support. All
controls and warning lights are convenient to the operator.
Automatic shut-down beneath the seat stops the rotors from turning if the
operator stands up while the engine is running.
Spider assemblies feature long-lasting wear
plates and spider hubs
Proportional hydraulic steering has been enhanced and offers improved
responsiveness with minimal effort on the part of the operator.
Hinged panels make servicing easy by allow- Removable steps provide quick access
ing quick access to filters and trowel blades to trowel blades
Operator Controls are ergonomically designed
and positioned for ease of use.
Mechanical Ride-On Trowels
Multiquip sets new standards for performance,
serviceability, and sustainability from a
gearbox driven machine.
The HHX raises the bar with features that deliver
utility and convenience you won’t find on any other
trowel.
Swing-away upper
frame design for simplified
maintenance.
Helical gearboxes offering the
industry’s most efficient, trouble-free
design.
Continuously Variable Transmission
for optimum performance during pan
floating or final finishing.
Six 55 watt Hella halogen lights
provide class leading illumination for
nighttime and indoor work.
Proportional hydraulic steering offers
improved responsiveness with minimal
effort on the part of the operator.
Twin Pitch Control for fast, easy
adjustment of blades.
THE HHX
SERIES
Five-Blade Spider
Exclusively on eight-foot HHX & HHN models.
Achieve 25% more blade contact for faster,
flatter finishing.
Gain improved handling and control.
Reduce wear on pan and blades due to better
balance and weight distribution.
Swing-away upper frame design makes
service and maintenance easy.
Make sure your equipment is capable of delivering the high-quality results
you demand day in and day out. Multiquip mechanical ride-on trowels are
the most powerful and dependable machines in the industry.
Operator is able to completely view the
finishing surface through the frame.
Retardant spray system is actuated
by controls located on the steering
handles for uniform coverage of the slab
surface.
Rugged frame is made of chromemoly
steel to withstand the rigors of handling
and transportation.
High-performance engines withstand
the rigors of concrete finishing.
Mechanical TwinPitch control for
fast, accurate adjustment of trowel
blades.
Weather resistant polyethylene
fuel tank and battery box
eliminates corrosion.
Lifting points are built into the
machine for balanced lifting.
Halogen lights provide
illumination for nighttime
or indoor work.
Spider assemblies can be economically rebuilt and feature long-lasting
wear plates and spider hubs.
Servicing is made
easy by a frame
design that allows
quick access to fill
ports and filters.
(HHN shown.
Called-out features
typical of all
mechanical trowels.)
Two-year warranty covers parts and labor on ride-on trowel
gearboxes.
One-year warranty covers parts and labor on the entire machine.
THE HHN SERIES
is equipped with the coolest running gearbox in the industry. Power is
supplied by a 34-HP diesel engine that spins twin five-blade rotors to a
top speed of 160 RPM.
Patented TwinPitch control,
available on all models,
enables the operator to
simultaneously control the
pitch of both rotors with
minimal effort.
Continuously variable
transmission (CVT) provides
superior performance by
adjusting the drive ratio to
obtain optimum torque and
speed levels during pan
floating and high-speed
finishing.
Patented steering assist
prevents operator fatigue
and makes controlling
the machine remarkably
easy—even with float pans.
Available on all models
except JTO-Series.
Automotive style CV-joints
ensure the consistent
transfer of power to each
gearbox. Spare belt carrier,
conveniently located on the
shaft, provides backup v-belts
in the event one should break
on the job.
Mechanical Ride-On Trowels
The ideal trowels for contractors who need hardworking, long-lasting, user-friendly machines.
Proven heavy-duty worm-drive design features large oil capacities and
integral cooling fans to reduce heat build-up and are standard equipment
on HTN and JWN-Series machines.
THE HTN SERIES
The entry level eight foot mechanical. Models are
available with Kohler carbureted or fuel injected
gasoline engines, along with all the features you
expect to find on a Whiteman ride-on trowel.
THE JWN SERIES
These versatile six-foot machines are ideal for jobs up to
6,000 sq. ft. Their lightweight design is ideal for high-rises
and enable contractors to get on the slab faster. The JWN
is equipped with heavy-duty gearboxes and a continuously
variable transmission that delivers a lightning fast rotor
speed of 180 RPM.
Blades, Pans and Accessories
Perfection lies in the details...
That’s why Multiquip takes such care in designing the accessories
for its distinctive line of power trowels. Stay with the leader by
using Genuine Multiquip pans and trowel blades.
MQ/Whiteman blades are made of heat-treated trowel steel, formulated to
our specifications for maximum wear resistance and long life. Our blades
are manufactured with additional rivets for greater uniformity and torsional
strength. This increases machine stability and produces a smoother,
flatter finish.
Enduro Blades use heavier gauge steel to achieve up to 50% longer life
than conventional trowel blades. They are ideal for heavier walk-behind
trowels and ride-on trowels. Quick Change Blades offer a simple, fast
alternative to bolt-on blades. A re-useable mounting bar and channel
mount blade system allows replacement of blades in minutes without the
use of tools.
Some brands of trowel blades on the market today may resemble the
MQ/Whiteman blade, but none comes close in quality, attention to detail
and overall value.
Multiquip offers float pans designed
specifically for all your panning needs.
Allow operators to get on the
slab later.
Achieve higher FF numbers and
increased production.
Transport Dollies
EMR3 transport dolly for ease of
maneuverability around the shop or
jobsite.
Removes the high spots and fills in
low areas on the slab surface.
Trowel Arm Fixture
Quickly check the alignment of each
trowel arm with this simple tool.
EMR2Transport dolly (shown
with JWN) for moving mechanical
trowels around the workplace or
on the jobsite.
Ride-On Trowel Specifications
Model
Engine
Engine
Cooling
HP*
Blades
Per
Rotor
Fuel Tak
Capacity
gal. (ltr)
Run Time
gal./hr.
(ltr/hr)
LxWxH in. (cm)
Liquid
55
6
10-130
117 (297)
11 (42)
2.81
(10.63)
125 x 65 x 57
(318 x 165 x 145)
2270
(1030)
EMR3
Liquid
55
6
10-160
92 (233)
11 (42)
2.36
(8.93)
95 x 48 x 57
(241 x 122 x 145)
2,100
(952)
EMR3
Liquid
34
5
40-170
91 (231)
9 (34)
1.58
(5.98)
98 x 50 x 54
(249 x 127 x 137)
1440
(658)
EMR2 or
EMR3
Liquid
34
5
40-160
91 (231)
5 (19)
1.58
(5.98)
95 x 48 x 46
(241 x 122 x 117)
1180
(535)
EMR2 or
EMR3
Rotor Path Width
RPM
in. (cm)
Operating
Weight Wheel Kit
lbs. (kg)
Twin 60" Non-Overlapping
STXD6i
Twin 48" Non-Overlapping
HTXD6i
Yanmar
Turbo
Diesel
Twin 48" Non-Overlapping
HHXD5
Vanguard
Turbo
Twin 48" Non-Overlapping
HHN34TVDTCSL5
Vanguard
Turbo
Twin 48" Non-Overlapping
HTN27KTCSL
Kohler
Air
27
4
40-140
91 (231)
4.4 (17)
2 (7.57)
95 x 48 x 46
(241 x 122 x 117)
780
(354)
EMR2
HTN28KTCSL
Kohler
Air
28
4
40-140
91 (231)
4.4 (17)
2 (7.57)
95 x 48 x 46
(241 x 122 x 117)
800
(363)
EMR2
Air
20
4
36-180
75 (191)
2.2 (8)
77 x 39 x 48
1.71 (6.47) (196
x 99 x 122)
685
(209)
EMR2
Twin 36" Non-Overlapping
JWN24HTCSL
Honda
**For current production units only. May not adapt to older models.
Models listed are equipped with TwinPitch control, Halogen Lights and Spray System. Batteries
are included.
* Engine power ratings are calculated by the individual engine manufacturer and the rating
method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies
makes no claim, representation or warranty as to the power rating of the engine on this
equipment and disclaims any responsibility or liability of any kind whatsoever with respect to
the accuracy of the engine power rating. Users are advised to consult the engine manufacturer’s
owners manual and its website for specific information regarding the engine power rating.
Your Multiquip dealer is:
MULTIQUIP INC.
All features and specifications are subject to change without notice.
Rev. (05-12_BD)
Connect with us on
POST OFFICE BOX 6254
CARSON, CA 90749
s
FAX: 310-537-3927
E-MAIL: mq@multiquip.com
www.multiquip.com
© COPYRIGHT 2012, MULTIQUIP INC.
Yanmar
Turbo
Diesel
Download PDF