A DIVISION OF THE LEGACY COMPANIES
2013
PRICE GUIDE
Effective Date January 1, 2013
Blakeslee Inc
1228 Capitol Dr.
Addison, IL 60101
Ph: 630.532.5021 Fax: 630.532.5020
blakeslee@blakesleeinc.com
www.blakesleeinc.com
2013VerA
Better by design . . . proudly made in U.S.A.!
There are approximately 350 Blakeslee Dishwasher models available, but only the basic models with
less than four tanks are shown. For larger dishwashers or for dishwashers with a variety of options, as well as circular type dishwasher models, information will be supplied on request.
Dishwasher type designations:
“UC”
-
Undercounter dishwasher
“D”
-
Door type, stationary rack-type dishwasher
“R”
-
Rack conveyor-type, straight model
“RA”
-
Rack conveyor-type, circular model (Rack-A-Round)
“F”
-
Flight conveyor-type, straight model (Standard Width)
“FA”
-
Flight conveyor-type, circular model (Flight-A-Round)
“XF”
-
Flight conveyor-type, straight model (Extra Wide)
“LT”
-
Low temp - Chemical sanitizing
“LC”
-
Low water consumption (multi-tank Rack conveyor-type and Flight conveyor-type
Models are assembled in any combination by using one or more of five basic tanks-(Std. or Extra Wide).
P=24 in. long; C=32 in. long (for rack conveyor-type only); E=36 in. long; L=40 in. long; M=50 in. long.
Dishwashers may be selected with one of the following sanitizing systems:
Conventional sanitizing type, 180°F minimum final rinse temperature, standard size
booster heater required.
Medium temperature type, 150-160°F final rinse temperature, small booster and also
chlorine dispenser required.
Low temperature type, minimum 120°F final rinse temperature, chlorine dispenser
required. No booster required unless basic hot water supply temperature is under 120°F.
All heating systems are controlled with adjustable electric thermostat and protected with
automatic liquid level control system. Steam coils used for the tank heat are stainless steel.
IMPORTANT INFORMATION
When ordering, please give the following information:
DISHWASHERS
Model Number
Type of tank heat
Voltage, cycle and phase
Director of operation
Optional equipment desired
KITCHEN MACHINES
Model Number
Voltage, cycle and phase
Optional equipment desired
• All prices are f.o.b. factory unless otherwise stated.
• All prices and specifications subject to change without notice.
• All orders are subject to approval and acceptance by the factory.
• Prices do not include federal, state, municipal or other taxes.
• Return of merchandise must be authorized and will be subject to a restocking charge.
WARRANTY
Blakeslee standard warranty is one year from date of installation, not to exceed eighteen months
from shipment date. This includes labor and parts expenses. Full warranty on chemical dispensing
equipment is three months; additional nine months parts only.
1
UNDERCOUNTER DISHWASHER
Heat Sanitizing:
UC-21-B with Built-in Booster
with TOP and SIDE Panels...............$5,425.00
UC-21T-B 6” Taller than Std.
and with Built-in Booster
with TOP and SIDE Panels...............$5,725.00
UC-21XT-B 12” Taller than Std.
and with Built-in Booster
with TOP and SIDE Panels...............$6,025.00
Chemical Sanitizing:
UC-21-C with Chlorine Dispenser
and 1.5 k.w. Tank Heat
with TOP and SIDE Panels...............$5,093.00
If stainless steel back panel is
desired, please add.............$250.00
If pumped drain is desired,
please add..........................................$300.00
Any model without panels deduct.......$100.00 (list)
GLASSWASHER
MODEL G-2000-F
3 K.W. electric heating element.
Non-abrasive conveyor.
Three separate pumps for detergent,
sanitizer, and rinse aid.
Voltage: 220/60/1
$6,983.00
2
Available in 50/60 Hz
DISHWASHERS
DOOR-TYPE
Better . . .
By design
MODEL
D-8B
D-8TB*
D-8
(with 12kw booster)
(with 12kw booster)
$8,532.00
$10,312.00
$11,712.00
STEAM INJECTOR
50.00
50.00
STEAM COIL (S.S.)
450.00
GAS HEAT
250.00
BASE PRICE (ELECTRIC HEAT)
D-9**
DD-8
DD-8B***
(Double D-8)
(Double D-8B)
$14,992.00
$18,552.00
50.00
100.00
100.00
450.00
450.00
900.00
900.00
250.00
250.00
500.00
500.00
$5,679.00
OPTIONAL
**CHEMICAL SANITIZER (LOW TEMP)
700.00
STD
COMMON DRAIN CONNECTION
CORNER FILLER PANEL
260.00
260.00
260.00
1,400.00
250.00
250.00
260.00
260.00
75.00
75.00
75.00
75.00
75.00
75.00
PRESSURE GAUGE
160.00
STD
STD
160.00
320.00
STD
STEAM PRESSURE REDUCING VALVE
550.00
550.00
550.00
550.00
550.00
550.00
WATER PRESSURE REDUCING VALVE
300.00
STD
STD
160.00
600.00
STD
550
570
580
300
1100
1100
EXTRA RACKS (EACH)
SHIPPING WEIGHT (APPROX. POUNDS)
*Model D-8TB 10” Taller than Standard D-8
**Model D-9 is a Low-Temp Dishwasher
***Model DD-8B includes two 12kw boosters
*ELECTRIC BOOSTERS – DOOR TYPE DISHWASHERS
D/W TYPE
40° Rise
70° Rise
Per Tank
12 k.w.
15 k.w.
Standard Features
DOORTYPE
DISHWASHER
Available in 50/60 Hz
All stainless steel pump (D-8, D-8T & Double D-8)
Automatic Fill
Auto Liquid Level Control
Door safety switch
Stainless steel frame
Stainless steel legs and feet
Stainless steel front panels
120-volt control circuit
Thermal overload protection for each motor
Racks (D-8, D-8T & Double D-8)
3
DISHWASHERS
RACK CONVEYOR-TYPE
SINGLE TANK
SINGLE TANK
WITH PRE-WASH
TWO TANK
RACK CONVEYOR-TYPE
Better . . .
By design
MODEL
R-L-40
R-M-50
R-PL-64
R-PM-74
R-CC-64
R-EE-72
R-LE-76
R-LL-80
R-ML-90
R-MM-100
$15,894.00
$16,894.00
$21,894.00
$22,894.00
$26,385.00
$27,185.00
$27,585.00
$27,985.00
$28,985.00
$29,985.00
STEAM INJECTOR
200.00
200.00
200.00
200.00
400.00
400.00
400.00
400.00
400.00
400.00
STEAM COIL (S.S.)
900.00
900.00
900.00
900.00
1,800.00
1,800.00
1,800.00
1,800.00
1,800.00
1,800.00
GAS HEAT
650.00
650.00
650.00
650.00
1,300.00
1,300.00
1,300.00
1,300.00
1,300.00
1,300.00
900.00
900.00
900.00
900.00
900.00
900.00
900.00
900.00
900.00
900.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
200.00
200.00
200.00
200.00
200.00
200.00
BASE PRICE (ELECTRIC HEAT)
OPTIONAL
CHEMICAL SANITIZER (LOW TEMP)
COMMON DRAIN CONNECTION
*COMMON ELECTRICAL (ELEC. HEAT)
250.00
250.00
COMMON STEAM CONNECTION
ENERGY SAVING CONTROLS
400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
400.00
EXTRA RACKS (EACH)
75.00
75.00
75.00
75.00
75.00
75.00
75.00
75.00
75.00
75.00
PRESSURE GAUGE
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
160.00
STEAM PRESSURE REDUCING VALVE
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
TANK EXTENSION (2” OR 4”)
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
200.00
VENT HOODS (EACH)
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
550.00
WATER PRESSURE REDUCING VALVE
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
300.00
SIDE LOADER
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
UNLOADER
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
ECONO-BLOWER WITH HEAT (60 HZ)
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
ECONO-BLOWER W/OUT HEAT (60HZ)
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
SHIIPING WEIGHT (APPROX. POUNDS)
760
800
1050
1090
1050
1090
1370
1380
1420
1480
Standard Features
RACK CONVEYOR-TYPE
DISHWASHER
Available in 50/60 Hz
4
Integrated Recirculating System Design
Automatic fill
Door safety switch
Stainless steel wash pump
Stainless steel frame, legs and feet
Stainless steel front panels
Final rinse economizer
120-volt control circuit
Thermal overload protection for each motor
Common electric connection for gas and steam-heated models
Protective heat chamber
Racks
*ELECTRIC BOOSTERS – DOOR TYPE
DISHWASHERS
D/W TYPE
40° Rise
70° Rise
Single Tank
36 k.w.
54 k.w.
Multi Tank
36 k.w.
54 k.w.
*Under 440V and without overload protection.
For information and pricing on “LC” - low water consumption Rack conveyor-type dishwashers, consult factory.
*NOTE:
DISHWASHERS
TWO TANK WITH PRE-WASH
THREE TANK
Better . . .
By design
MODEL
R-PCC-88
R-PEE-96
R-PLL-104
R-PMM-124
R-EEE-108
R-LLL-120
R-MMM-150
$32,385.00
$33,185.00
$33,985.00
$35,985.00
$38,376.00
$39,576.00
$42,576.00
STEAM INJECTOR
400.00
400.00
400.00
400.00
400.00
400.00
400.00
STEAM COIL (S.S.)
1,800.00
1,800.00
1,800.00
1,800.00
1,800.00
1,800.00
1,800.00
GAS HEAT
1,300.00
1,300.00
1,300.00
1,300.00
1,300.00
1,300.00
1,300.00
CHEMICAL SANITIZER (LOW TEMP)
900.00
900.00
900.00
900.00
900.00
900.00
900.00
COMMON DRAIN CONNECTION
450.00
450.00
450.00
450.00
450.00
450.00
450.00
*COMMON ELECTRICAL (ELEC. HEAT)
450.00
450.00
450.00
450.00
450.00
450.00
450.00
COMMON STEAM CONNECTION
200.00
200.00
200.00
200.00
200.00
200.00
200.00
COMMON WATER CONNECTION
300.00
300.00
300.00
300.00
300.00
300.00
300.00
ENERGY SAVING CONTROLS
400.00
400.00
400.00
400.00
400.00
400.00
400.00
EXTRA RACKS (EACH)
75.00
75.00
75.00
75.00
75.00
75.00
75.00
TANK EXTENSION (2” OR 4”)
200.00
200.00
200.00
200.00
200.00
200.00
200.00
PRESSURE GAUGE
160.00
160.00
160.00
160.00
160.00
160.00
160.00
STEAM PRESSURE REDUCING VALVE
550.00
550.00
550.00
550.00
550.00
550.00
550.00
VENT HOODS (EACH)
550.00
550.00
550.00
550.00
550.00
550.00
550.00
WATER PRESSURE REDUCING VALVE
300.00
300.00
300.00
300.00
300.00
300.00
300.00
ECONO-BLOWER WITH HEAT (60 HZ)
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
6,675.00
ECONO-BLOWER WITHOUT HEAT (60 HZ)
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
5,675.00
UNLOADER
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
5,700.00
SIDE LOADER
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
4,300.00
1380
1420
1660
2060
1745
2008
2120
BASE PRICE (ELECTRIC HEAT)
OPTIONAL
SHIIPING WEIGHT (APPROX. POUNDS)
*Under 440V and without overload protection.
Standard Features
RACK CONVEYOR-TYPE
DISHWASHER
Available in 50/60 Hz
Integrated Recirculating System Design
Automatic fill
Door safety switch
Stainless steel wash pump
Stainless steel frame, legs and feet
Stainless steel front panels
Final rinse economizer
120-volt control circuit
Thermal overload protection for each motor
Common electric connection for gas and steam-heated models
Protective heat chamber
Racks
5
FLIGHT CONVEYOR-TYPE
SINGLE TANK
SINGLE TANK WITH PRE-WASH
TWO TANK WITH PRE-WASH
TWO TANK
THREE TANK
“F” FLIGHT-TYPE - STANDARD WIDTH (20” BELT) *
“XF” FLIGHT-TYPE - EXTRA WIDE (30” BELT) *
TANK HEAT: ELECTRIC, GAS, STEAM INJECTOR, OR STEAM COIL
STANDARD FEATURES:
BLOWERS/DRYERS - FLIGHT TYPE
DISHWASHERS
INTREGRATED RECIRCULATING SYSTEM DESIGN
STAINLESS STEEL FRAME, LEGS, AND ADJUSTABLE FEET
Econo-Blower (w/heat)
60 Hz
$6,675.00
Econo-Blower (w/o heat)
60 Hz
$5,675.00
FINAL RINSE ECONOMIZER
712-Blower (w/heat)
60 Hz
$12,485.00
VENT HOODS FOR EXHAUSTING STEAM
712-Blower (w/o heat)
60 Hz
$11,285.00
DOOR SAFETY SWITCHES
STAINLESS STEEL FRONT AND END PANELS
AUTOMATIC TANK FILL
TOP MOUNTED STAINLESS STEEL CONTROL CABINET
115 VOLT CONTROL CIRCUIT
STAINLESS STEEL PUMP IMPELLER GUARDS
2’6” OR 4’ LOAD END - OPTIONAL LONGER LENGTHS AVAILABLE
4’ OR 6’ UNLOAD END - OPTIONAL LONGER LENGTHS AVAILABLE
FLIGHT - TYPE DISHWASHERS AVAILABLE WITH VARIOUS SIZE TANKS IN ANY NUMBER
FROM SINGLE TANK UP.
“LC” FLIGHT TYPE DISHWASHERS - Low water consumption.
FOR LISTING OF NUMEROUS OPTIONS AND PRICING - CONTACT FACTORY OR LOCAL
SALES REPRESENTATIVE.
AUTOMATIC TRAY UNLOADER*
Blakeslee flight type machines are available with mechanism which automatically
unloads trays and stacks them in self-leveling tray carts.
6
*NOTE:
Consult factory for information and pricing.
FLIGHT- A - ROUND/RACK-A-ROUND DISHWASHERS
Blakeslee “Flight-A-Round (“FA”)
Dishwasher is a deluxe circular
Flight-type Dishwasher. All of the
labor-saving and smooth operation
features that are built into Flight-type
dishwashers are also included in the
“Flight-A-Round” models.
SQUARE &
RECTANGLE
WASH
RINSE
PRE
WASH
ANY
WIDTH
CLEANOUTACCESSABILITY
TRIANGLE
WALL
ANY LENGHT C
DOORS ON INSIDE
WALL
2” MIN
ANY
WIDTH
B
AN
Min. Lenght
of Flight-ARound System
FA-L or RA-L
3’4”
5’8¾”
9’0¾”
FA-PL or RA-PL
5’4”
5’8¾”
11’0¾”
FA-EE or RA-EE
6’2”
5’8¾”
11’8¾”
FA-LL or RA-LL
6’8”
5’8¾”
12’4¾”
FA-PEE or RA-PEE
8’0”
5’8¾”
13’8¾”
FA-PLL or RA-PLL
8’8”
5’8¾”
14’4¾”
FA-LLL or RA-LLL
10’0”
5’8¾”
FA-MMM or RA-MMM
12’6”
5’8¾”
HT
ENG
YL
Min.
Table
Width
LENGHT
PER CHART
BELOW
ANY LENGHT
TYPICAL EXAMPLES
Overall
Lenght of
Machine
5”- 8 3/4”
MINIMUM
WIDTH
FINAL RINSE
Less expensive Blakeslee “Rack-ARound (“RA”) Dishwasher dish
racks are automatically conveyed
around the soiled and clean dish
tables and through the dishwashing
machine. The dishwasher can be any
one of Blakeslee 1, 2 or 3 tank rack
conveyor models.
Blakeslee
Dishwasher
Model No.
BASIC OVAL
A
DOORS ON OUTSIDE
*ELECTRIC BOOSTERS – FLIGHT TYPE DISHWASHERS
D/W TYPE
40° Rise
70° Rise
Single Tank
36 k.w
54 k.w.
15’8¾”
Multi Tank
45 k.w
54 k.w.
18’2¾”
XF-Multi Tank
45 k.w
54 k.w.
ELECTRIC AND STEAM BOOSTERS FOR ALL MODELS
Electric Boosters
Used with
Dishwasher Model
Booster
Interwired
Interplumbed
12 k.w. Machine mounted
D-8
$1,780.00
15 k.w. Machine mounted
D-8
$1,880.00
15 k.w. Free standing
D-8
36, 45 or 54 k.w. Machine mounted
All Models
36, 45 or 54 k.w. Free standing
All Models
$1,940.00
$2,000.00
$5,700.00
$4,380.00
$5,700.00
Steam Boosters
S2 Machine mounted
S2 Free standing
Double S2 Machine mounted
Double S2 Free standing
$3,975.00
F, XF, FA, RA
All Models
$2,975.00
$8,050.00
F, XF, FA, RA
All Models
$3,975.00
$6,050.00
$8,050.00
7
POT AND UTENSIL WASHERS
FL-121
PT-151
PT-301
Front Load
Single Rack
Pass Thru
Single Rack
Pass Thru
Double Rack
Shpg. Wt. 900 Lbs.
7.5 H.P.
208/240-60-3
440/480-60-3
Racks not included
Shpg. Wt. 1150 Lbs.
7.5 H.P.
208/240-60-3
440/480-60-3
Racks not included
Shpg. Wt. 1650 Lbs.
10 H.P.
208/240-60-3
440/480-60-3
Racks not included
$20,383.00
$24,720.00
$37,320.00
*Available in 50/60 Hz
POT AND UTENSIL WASHER EQUIPMENT
FL-121
1/3 H.P. Vent Fan......................................... $1200.00
Hold-Down Grid............................................. $500.00
8
ELECTRIC BOOSTERS – FLIGHT TYPE DISHWASHERS
MODEL
40° Rise
70° Rise
FL-121
24 k.w
Not Available
PT-151
24 k.w
Not Available
PT-301
36 k.w
Not Available
PT-151 AND PT-301
RACKS FOR FL-121, PT-151 AND PT-301
Steam Injector Tank Heater........................... $680.00
Steam Coil (Stainless Steel)....................... $1,370.00
3/4 H.P. Vent Fan........................................ $1,790.00
Hold-Down Grid ..............(PT-151)................ $500.00
Hold-Down Grid ..............(PT-301)................ $950.00
Bake Sheet Rack (holds ten)............................... $625.00
General Utility Rack....................................... $425.00
Basket (Utensil) Rack.................................... $440.00
Reversible Cake Pan Rack............................ $625.00
Custom Racks................................. Consult Factory
FOOD MIXING MACHINES
Mixers available in either standard or deluxe stainless steel finishes.
Stainless steel bowls and bowls guards are standard on all mixers.
20 QT
30 QT
40 QT
60 QT
80 QT
FLOOR
FLOOR
BENCH
PORTABLE
FLOOR
FLOOR
FLOOR
B-20-CA
U-20-CA
F-20-CA
F-30-CA
DD-40*
DD-60*
DD-60V
$4,884.00
$6,276.00
$5,276.00
$7,392.00
$9,533.00
$13,875.00
$13,875.00
B-20-SS
U-20-SS
F-20-SS
F-30-SS
DD-40-SS*
DD-60-SS*
DD-60VSS*
$6,384.00
$7,976.00
$6,976.00
$9,292.00
$12,333.00
$16,875.00
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
“H” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
1/2 H.P.
110/120-60-1
208/240-60-1
208/240-60-3
1/2 H.P.
110/120-60-1
208/240-60-1
1/2 H.P.
110/120-60-1
208/240-60-1
208/240-60-3
3/4 H.P.
110/120-60-1
208/240-60-1
208/240-60-3
1-1/2 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
2 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
185 LBS.
350 LBS.
210 LBS.
275 LBS.
1000 LBS.
1100 LBS.
DD-60XT-300*
DD-60PM*
$13,875.00
D-80*
D-80V*
$14,875.00
$14,966.00
$14,966.00
DD-60XTSS-300*
DD-80-SS*
DD-80VSS*
DD-80XT500*
DD-80-PM*
$14,966.00
$16,966.00
DD-80XTSS-500*
$17,875.00
$18,266.00
S/S BOWL
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
3 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
2 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
5 H.P.
208/240-60-3
440/480-60-3
1100 LBS.
1100 LBS.
1100 LBS.
1100 LBS.
1100 LBS.
1100 LBS.
1150 LBS.
$16,875.00
$20,266.00
$18,266.00
*Available in 50/60 Hz
NOTE: 6 foot cord and plug furnished as part of standard
equipment on 110-volt models. If a permanent connection is
preferred, a tapped outlet is furnished for 1/2” conduit.
Minimum wire size recommended........................No. 14 A. W. G.
*440/480-60-3 on 40, 60 and 80 qt. models $500.00 additional.
Options: DD-60 and DD-80
Power bowl lift......................................................... $2200.00
Tall column 15-1/2”
higher than standard............................................... $3100.00
(includes power bowl lift)
Mixing Light............................................................... $550.00
ATTACHMENTS (FOR MIXERS AND FOOD CUTTERS)
9” CHEESE SHREDDER ATTACHMENT
9” VEGETABLE SLICERS
9” Vegetable Slicer Complete with Adjustable Slicer
Plate and Hopper Front.........Part No. 20581........$1,346.00
Grater Plate....................Part No. 15071................... $99.00
Shredder Plates 3/32”....Part No. 15088................... $99.00
3/16”......Part No. 15021................... $99.00
5/16”......Part No. 15019................... $99.00
1/2”........Part No. 15072................... $99.00
Hub and Shaft Assembly (only one required for all sizes of
shredder and grater plates).
Part No. 20599................. $329.00
9” Cheese Shredder Complete with Hub & Shaft,
5/16” Shredder Plate and Hopper Front.
Part No. 99731............. $1,096.00
FOOD & MEAT CHOPPER ATTACHMENT
Meat Chopper, Double Tinned, with Knife & 1/8” Plate
Part No. 20447................ $529.00
Extra Knives for Meat Chopper
Part No. 1901.................... $50.00
Extra Plates for Meat Chopper
1/8”
Part No. 1902................ $50.00
3/16”
Part No. 1903................ $50.00
1/4”
Part No. 1904................ $50.00
3/8”
Part No. 1905................ $50.00
1/2”`
Part No. 1906................ $50.00
9
BOWLS, BEATER, WHIPS & ATTACHMENTS
IMPORTANT :
Item
B-20
U-20
F-20
Bowl
Capacity
12qt.
20qt.
20qt.
F-30
30qt.
20qt.
DD-40
30qt.
40qt.
30qt.
DD-60
40qt.
60qt.
30qt.
40qt.
DD-80
60qt.
80qt.
These prices apply for accesories ordered with new machines. For existing machines contact parts distributor or factory.
Bowl
S.S.
Bowl
Adapter
1716
$495.00
1717
Not
required
$495.00
“B”
Batter
Beater
“B”
Batter
Beater
S.S.
“W”
Wire
Whip
S.S.
Wires
“H”
Dough
Hook
1377
3455
1517
$185.00
$359.00
$180.00
1367
72556
3456
1385
$175.50
$625.50
$359.00
$202.50
3315
1378
72585
3458
1513
$550.00
$175.50
$625.50
$359.00
$202.50
3310
Not
required
$795.00
1973
72557
3459
1987
$202.50
$643.50
$359.00
$270.00
75873
75874
75875
75876
$650.00
$185.00
$340.50
$290.10
98513
98521
72558
98501
98517
$697.50
$200.00
$1,125.00
$355.50
$305.10
“SD”
Sweet
Dough
Beater
N/A
N/A
N/A
N/A
N/A
N/A
N/A
“PK”
Pastry
Knife
“PK”
Pastry
Knife
S.S.
1543
“M”4
Wing
Whip
S.S.
N/A
$295.00
1394
1538
73396
1542
$315.00
$298.50
$346.50
$395.00
1512
1544
1573
$315.00
$355.00
$430.00
Bowl
Truck
Painted
Bowl
Extension
Ring S.S.
Splash
Cover
S.S.
1734
1737
Bowl
Trucks
are not
interchangeable
$295.00
$345.00
1735
1738
$365.00
$345.00
1735
1738
$365.00
$345.00
1979
1976
73844
1978
7125
1736
14618
$345.00
$348.50
$282.50
$435.00
$465.00
$365.00
$382.50
75877
75878
75859
75881
75882
$471.00
$466.50
$948.00
$367.50
$367.50
98520
99481
98500
77156
99493
99491
$486.00
$481.50
$963.00
$465.00
$382.50
$382.50
98508
98515
75880
98506
98522
98516
99479
98505
76729
99474
99477
$1,045.00
$250.00
$1,125.00
$400.50
$425.00
$522.00
$675.00
$963.00
$465.00
$382.50
$382.50
98513
99040
98521
72558
98501
98517
$697.50
$400.50
$200.00
$1,125.00
$355.50
$305.10
N/A
98520
99471
98500
7125
99493
99491
$486.00
$382.50
$963.00
$465.00
$382.50
$382.50
98508
99040
98515
75880
98506
98522
98516
99479
98505
7125
99474
99477
$1,045.00
$400.50
$250.00
$1,125.00
$400.50
$425.00
$522.00
$675.00
$963.00
$465.00
$382.50
$382.50
98108
98268
72299
98271
$1,050.00
$225.00
$1,165.50
$490.50
N/A
98513
99100
98521
72558
98501
98517
$697.50
$400.50
$200.00
$1,125.00
$355.50
$305.10
98269
98504
99472
98502
15094
96003
99199
$359.10
$607.50
$805.50
$963.00
$515.00
$472.50
$382.50
N/A
98520
99481
98500
7125
99493
99491
$486.00
$481.50
$963.00
$465.00
$382.50
$382.50
98508
99100
98515
75880
98506
98522
98516
99479
98505
7125
99474
99477
$1,045.00
$400.50
$250.00
$1,125.00
$400.50
$425.00
$522.00
$675.00
$963.00
$465.00
$382.50
$382.50
99059
98268
72299
98271
$1,250.00
$225.00
$1,165.50
$490.50
98023
98019
72290
98021
$1,350.50
$275.00
$1,165.50
$517.50
BOWL GUARD - TYPE “B” - VERTICAL LIFT
20 and 30 Qt. models...........Part No. 73830.......... $100.00
60 and 80 Qt. models...........Part No. 73835.......... $100.00
BOWL SCRAPER
20 Qt. models.......................Part No. 73757.......... $475.00
30 Qt. models.......................Part No. 73758.......... $550.00
40 Qt. models.......................Part No. 76840.......... $645.00
60 Qt. models.......................Part No. 73759.......... $700.00
80 Qt. models.......................Part No. 73760.......... $805.50
10
“SH”
Spiral
Dough
Hook
N/A
N/A
98269
98504
99472
98502
15094
96003
99199
$359.10
$607.50
$805.50
$963.00
$515.00
$472.50
$382.50
98020
97681
99470
97674
15094
3439
99120
$450.00
$625.50
$841.50
$963.00
$515.00
$365.00
$382.50
POTATO / VEGETABLE PEELERS
OPTIONAL
Portable Stand........$465.00
Peel Trap Basket.....$140.00
S-15-T
XC-15-T
XC-30-T
XC-60-T
Bench Type With Timer
15-20 lbs cap.
1/3 H.P.
Cord and plug
115/230-60-1
Shpg. Wt. 136 Lbs.
Floor Type With Timer
15-20 lbs. cap
1/3 H.P.
115/230-60-1
Includes S.S. peel trap
Shpg. Wt. 168 Lbs.
Floor Type With Timer
30-33 lbs. cap.
3/4 H.P.
115/230-60-1
208/240-60-1
Include S.S. peel trap
Shpg. Wt. 186 Lbs
Floor Type With Timer
50-60 lbs. cap.
1 H.P.
115/230-60-1
208/240-60-1
Include S.S. peel trap
Shpg. Wt. 194 Lbs.
$2,332.00
$3,972.00
$5,480.00
$5,990.00
*All peelers available in 50/60 Hz
NOTE: All peelers available in 3 Phase without timer.
BURNISHERS
BB-914
BB-2016
BB-1224
A BLAKESLEE EXCLUSIVE
SILVER BURNISHER PRICES
Prices include burnishing balls and approx. 1 month supply of compound
Model
Price
Shp’g Wt.
Motor Size
BB-914
$6,287.00
185 lbs.
3/4 H.P.
BB-2016
$9,297.00
460 lbs.
1 H.P.
BB-1224
$11,437.00
580 lbs.
1-1/2 H.P.
All burnishers furnished with 110 volt, 60 cycle, 1 phase motors, standard
Special porcelain-ceramic burnishing balls (never rust) now
make it possible to restore luster and brightness to
stainless-steel flatware and hollow ware as well as silver.
Additional Burnishing Balls - Sold by carton only
8-5 # Boxes ...PART NO. 18021..... $805.50 ...40 lbs.
40# Bulk.........PART NO. 18026..... $787.50 ...40 lbs.
*All models available in 220/50 HZ and 220/60 HZ
Additional Burnishing Compound 1 case 4/1 gallon bottles ........PART NO. 18020.... $242.10
11
PREMIUM SLICERS
BPS-10 - 10” Premium Slicer
Voltage: 120/60/1
Weight: 66 lb (30kg)
Dimensions: 19.5” W x 26” D x 19.5” H
495mm W x 660mm D x 495mm H
$1,959.00
BPS-12 - 12” Premium Slicer
Voltage: 120/60/1
Weight: 66 lb (30kg)
Dimensions: 19.5” W x 25” D x 19.5” H
495mm W x 640mm D x 495mm H
$2,099.00
BDS-13 - 13” Premium Slicer
Voltage: 120/60/1
Weight: 90 lb (41kg)
Dimensions: 26” W x 28” D x 24” H
665mm W x 710mm D x 615mm H
$2,619.00
12
13
A DIVISION OF THE LEGACY COMPANIES
Blakeslee
1228 Capitol Dr.
Addison, IL 60101
PH: 630.532.5021 Fax: 630.532.5020
blakeslee@blakesleeinc.com
www.blakesleeinc.com