IP Link® Device Interface
Communication Sheet
epsn_1_177_4.pke
Revision: 10/28/2013
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Epson
N/A
EMP 5600, EMP 7600, POWERLITE 7600P
Version History:
Driver
Version
Date
IP Link
Compiler
GC
Version
Notes
4
10/27/2013
1.6.0
3.5.1
Added Models EMP 5600 and EMP 7600.
3
1/18/06
1.0.9.3
1.8
Released version, updated command states for Freeze and A/V
Mute. Changed query delay when projector is off.
2
1/26/05
1.0.9.3
1.5
Beta version, added Volume, optimized script.
1
11/17/03
N/A
1.0
Created, tested on 7700P
Driver Notes:
No status when projector is turned off.
This driver has been optimized for volume.
Page 1 of 5
IP Link® Device Interface
Communication Sheet
epsn_1_177_4.pke
Revision: 10/28/2013
Control Commands & States:
AV Mute
On
Off
Freeze
On
Off
Toggle
Input
PC1
PC2 (RGB)
Component (YCbCr)
Component (YPbPr)
Video (Composite)
Video (S)
DVI
Power Control
On
Volume (Discrete)
0 to 31 in steps of 1
Off
Page 2 of 5
IP Link® Device Interface
Communication Sheet
epsn_1_177_4.pke
Revision: 10/28/2013
Status Available:
AV Mute
On
Off
Connection Status
Connected
Disconnected
Device Status
No error or error is
cancelled
Fan Problem
Internal temperature is
abnormally high
Lamp life expectancy is
close to end
Lamp problem
Other failures
System Fault
Status Unavailable
Freeze
On
Off
Input
PC1
PC2 (RGB)
Component (YCbCr)
Component (YPbPr)
Video (Composite)
Video (S)
DVI
Lamp Usage
Hours
Power Control
On
Off
Power Status
On
Off
Cooling Down
Status Unavailable
Volume (Discrete)
0 to 31 in steps of 1
Page 3 of 5
Warming Up
IP Link® Device Interface
Communication Sheet
epsn_1_177_4.pke
Revision: 10/28/2013
MLC60 Series Supported Commands:
AV Mute
On
Off
Freeze
On
Off
Toggle
Input
PC1
PC2 (RGB)
Component (YCbCr)
Component (YPbPr)
Video (Composite)
Video (S)
DVI
Power Control
On
Volume (Discrete)
0 to 31 in steps of 1
Off
Page 4 of 5
epsn_1_177_4.pke
IP Link® Device Interface
Communication Sheet
Revision: 10/28/2013
Cable and Adapter Requirements:
See cable diagram below.
Notes for the Device:
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection. +12VDC may be obtained from the Power
connector on the Extron IP Link Device.
General Notes:
Page 5 of 5