Epson | CX6600 - Stylus Photo Printer | Operating instructions | Epson CX6600 - Stylus Photo Printer Operating instructions

Quick Guide
Copying, Printing,
and Scanning Without a Computer
Maintaining Your CX6600
Solving Problems
CPD-18234
4049499-00
XXX
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of Seiko Epson Corporation. The information
contained herein is designed only for use with this Epson product. Epson is not responsible for any
use of this information as applied to other equipment.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result
of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s
operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original Epson Products or
Epson Approved Products by Seiko Epson Corporation.
Responsible Use of Copyrighted Materials
Digital cameras, scanners, and ink jet printers, like conventional photocopiers and cameras, can be
misused by improper copying or printing of copyrighted material. While some countries’ laws
permit limited copying of copyrighted material in certain circumstances, those circumstances may
not be as broad as some people assume. Epson encourages each user to be responsible and respectful
of the copyright laws when using digital cameras, scanners, and ink jet printers.
Trademarks
Epson and Epson Stylus are registered trademarks and EPSON Smart Panel is a trademark of Seiko
Epson Corporation.
BorderFree and DURABrite are registered trademarks, PremierArt is a trademark, and Epson
Connection, Epson Store, and SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2004 Epson America, Inc.
5/04
2
Contents
Using Your Stylus CX6600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading Single Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using Special Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Copying Without a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing Copy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Memory Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Compatible Memory Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Inserting a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using Your CX6600 as a Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Printing from a Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Printing an Index Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Photos to Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing with DPOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Choosing Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
24
26
27
Scanning to a Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Placing Your Original Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Scanning to a Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Maintaining Your CX6600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Replacing Ink Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Where To Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson America, Inc. Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Contents
41
43
44
45
45
Using Your Stylus CX6600
You can use your Epson Stylus® CX6600 to make color or black-and-white copies
without turning on your computer. All you have to do is place your original on the
scanner glass and press a button.
You can also print photos directly from your digital camera’s memory card—just
insert the card, select the settings you want to use, and print. You don’t have to be
connected to a computer. Your CX6600 lets you share images in other ways, too—
by scanning to a memory card, or by copying images to and from your computer.
To set up your CX6600 and install its software, see the Start Here sheet.
For instructions on printing and scanning from your computer, see your on-screen
Reference Guide. An icon for the CX6600 Reference Guide is automatically placed
on your desktop when you install the software.
Please follow these guidelines throughout:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your CX6600.
Tip:
Tips contain hints for better copying, scanning, and printing.
5
Using the Security Lock
If you want to prevent unauthorized use of your CX6600, you can activate its
security lock feature. The security lock requires you to enter a PIN (Personal
Identification Number) whenever you turn on the CX6600. If you forget your
PIN code, you can still regain access to your CX6600 (see page 8).
To enable the security lock, you must first run the Security Lock program on a
computer connected to the CX6600. To set up your CX6600 and install its
software, see the Start Here sheet.
Follow these steps to activate the security lock:
1. Press the P On button to turn on your CX6600.
2. Insert your Stylus CX6600 software CD-ROM.
3. Windows: If you see the Software Installation screen, click Exit. Open the
SecurityLockTool folder on your software CD-ROM, then double-click the
EPILOCE4 icon.
Macintosh: The Epson folder automatically opens (if it doesn’t, double-click
the Epson CD-ROM icon). Then double-click the Security Lock icon.
Note:
You can also copy the program to your system by dragging its icon from the
CD-ROM onto your hard drive.
You see a screen like this one:
4. Make sure Security Lock On
is selected, then click OK.
5. At the confirmation screen,
click OK again, then click
Cancel to close the program.
You have now enabled the
Security Lock menu on the
CX6600.
6 Using Your Stylus CX6600
6. On the control panel, press the Setup button, then use the l/r Select
buttons to display Security Lock on the LCD screen.
Press
Setup. . .
Then press these buttons to display
Security Lock on the screen
7. Press the x Color button.
8. Press the green button next to On (shown on the LCD screen).
9. Enter your 4-digit PIN code. Be sure to write down the number so you don’t
forget it.
10. Press the green button next to OK on the LCD screen.
11. Turn off your CX6600. It is now locked.
When you turn the CX6600 back on, it prompts you to enter your PIN code. You
cannot use it without entering your PIN.
Turning Off the Security Lock
If you want to turn the security lock off (so that the CX6600 doesn’t prompt you
to enter your PIN code each time you turn it on), follow these steps:
1. On the control panel, press the Setup button, then use the l/r Select
buttons to display Security Lock on the LCD screen.
Press
Setup. . .
Then press these buttons to display
Security Lock on the screen
2. Press the x Color button.
Using the Security Lock 7
3. Press the green button next to Off (shown on the LCD screen).
4. Enter your 4-digit PIN code.
5. Press the green button next to OK on the LCD screen. The security feature is
now turned off.
If you forget your PIN code, you can regain access to the CX6600 by running the
security lock program from your computer:
1. Insert your Stylus CX6600 software CD-ROM.
2. Windows: If you see the Software Installation screen, click Exit. Open the
SecurityLockTool folder on your software CD-ROM, then double-click the
EPILOCE4 icon.
Macintosh: The Epson folder automatically opens (if it doesn’t, double-click
the Epson CD-ROM icon). Then double-click the Security Lock icon.
Note:
You can also copy the program to your system by dragging its icon from the
CD-ROM onto your hard drive.
When you see a screen like
this one, select Security Lock
Off and click OK.
3. At the confirmation screen,
click OK again, then click
Cancel to close the program.
This deactivates the security
lock feature so that the
Security Lock menu on the
CX6600 no longer appears.
You now have full access to
the CX6600.
8 Using Your Stylus CX6600
Loading Paper
Follow the guidelines in these sections to load paper in your CX6600 and select
compatible Epson papers for high-quality results.
■
“Loading Single Sheets” below
■
“Using Special Papers” on page 11
Loading Single Sheets
1. Pull out the output tray and its extension.
2. Flip the feeder guard forward.
Feeder guard
3. Insert your paper against the right edge of the sheet feeder.
Note:
Do not place the paper in front of the feeder guard.
9
4. Slide the left edge guide against the paper (but not too tightly).
Insert paper against
the right edge
Do not place paper in
front of the feeder guard
Slide the guide
against the paper,
but not too tightly
When loading paper, also be sure to:
■
Load the printable side face-up. It’s often whiter or brighter.
■
Load letterhead or preprinted paper top-edge first.
■
If the paper has a cut corner, position it in the upper-right corner as you load
it in the sheet feeder.
■
Load paper short-edge first, even for landscape-oriented documents and
photos.
■
Check the paper package for additional instructions on using special papers.
■
Load paper no higher than the arrow on the left edge guide.
10 Loading Paper
Using Special Papers
Epson® offers the following special ink jet papers for the Stylus CX6600.
Note:
Some papers can only be used when printing from your computer.
*
Paper name*
Size
Part number
Epson Premium Bright White
Paper
Letter (8.5 × 11 inches)
S041586
Epson Photo Paper or
Epson Glossy Photo Paper
4 × 6 inches
S041134/S041671
Letter (8.5 × 11 inches)
S041141/S041649
S041271/S041272
A4 (8.3 × 11.7 inches)
S041140
Epson Matte Paper
Heavyweight
Letter (8.5 × 11 inches)
S041257
8 × 10 inches
S041467
Epson Double-Sided Matte
Paper
Letter (8.5 × 11 inches)
S041568
Epson Premium Semigloss
Photo Paper
Letter (8.5 × 11 inches)
S041331
Epson Ink Jet Transparencies
Letter (8.5 × 11 inches)
S041064
Epson DURABrite® Ink
Glossy Photo Paper
Letter (8.5 × 11 inches)
S041731
4 × 6 inches
S041734
PremierArt™ Matte
Scrapbook Paper for Epson
Letter (8.5 × 11 inches)
SCR1002
The availability of paper types varies by location.
To order Epson ink cartridges and paper, contact your dealer or call the
Epson StoreSM at (800) 873-7766 or visit www.epsonstore.com (U.S. sales only).
In Canada, please call (800) 463-7766 for dealer referral.
Using Special Papers 11
To load Epson special ink jet papers, follow these guidelines:
Paper type
Loading capacity
Premium Bright White Paper
125 Sheets
Glossy Photo Paper or Photo
Paper
20 sheets
Matte Paper Heavyweight
20 sheets with a support sheet beneath the
stack
Double-Sided Matte Paper
1 sheet
Premium Semigloss Photo Paper
1 sheet
Ink Jet Transparencies
30 sheets with a sheet of plain paper beneath
the stack
DURABrite Ink Glossy Photo
Paper
20 sheets
PremierArt Matte Scrapbook
Paper for Epson
1 sheet
12 Loading Paper
Copying
Follow the instructions in these sections to use your CX6600 as a stand-alone copy
machine.
■
“Copying Without a Computer” below
■
“Changing Copy Settings” on page 14
Copying Without a Computer
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper-left corner. Move
your document about 1/8 inch from the top and side edge so your entire
document is scanned.
Move the document
about 1/8 inch from the
edges to avoid cropping
Note:
If you place your document against the guides, the edges next to the guides won’t
be copied.
If you need to copy a thick document, such as a book, you can remove the scanner
lid. Gently press down the original to keep it flat on the document table. Be sure to
replace the scanner lid when you’re finished.
13
3. Close the scanner lid.
4. Press the Copy button to enter Copy Mode.
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in “Changing Copy Settings” below.
6. Press the x Color button (to make color copies) or the x B&W button (to
make black-and-white copies). Your document is scanned then printed. If
you’re using the 2-up or 4-up Copy Layout setting (see “Copy Layout” on
page 17), follow the instructions on the LCD screen to scan additional sheets.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6600.
Changing Copy Settings
The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Copy Mode button
Paper type
Print quality
Reduce/enlarge
Menu selection buttons
Number of copies
Paper size
Note:
You can save the current copy settings (except for the number of copies) by pressing
the Save button for 3 seconds until you see the message “Stored” on the screen. To
recall these settings, press and hold the Recall button for 3 seconds.
If you want to clear the current copy settings and return the CX6600 to its default
settings, press and hold the Reset button for 3 seconds.
14 Copying
Number of Copies
Use the number keypad to select the number of copies you want to print (up to
99). If you’re using the 2-up or 4-up Copy mode setting (see “Copy Layout” on
page 17), you can’t select more than one copy.
Paper Type
Paper type
If you have loaded special paper, use this
button to select one of the paper type settings
listed below:
If you have loaded this kind of paper...
Select this setting...
Plain paper
Epson Premium Bright White Paper
Plain
Epson Matte Paper Heavyweight
PremierArt Matte Scrapbook Paper for Epson
Matte
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Glossy
Epson DURABrite Ink Glossy Photo Paper
DB Photo
Note:
Always select the paper type first, because it determines the available print quality and
paper size settings.
Print Quality
Use this button to select one of these print
quality settings:
■
Draft for making copies quickly when
image quality is not important
Print quality
■
Text for copying text and line art
■
Image for copies that include color or black-and-white images
■
Best for the highest-quality copies
Changing Copy Settings 15
Paper Size
Use this button to select the size of paper
you’ve loaded. Choose one of these sizes: A4,
LTR (letter), 4 × 6, 5 × 7, or 8 × 10.
Paper size
Note:
If you’re printing 4 × 6 photos, do not use paper with micro perforated edges. Instead,
select one of the papers listed on page 11.
Reduce or Enlarge
Reduce/enlarge
Use this button to reduce or enlarge the size of
your copied image. You can select from these
settings:
Setting
Result
Actual
Prints the image at its original size
Auto Fit Page
Reduces or enlarges the image, as needed, to fit the
selected paper size
Letter & 4 × 6
4 × 6 & Letter
Letter & 5 × 7
5 × 7 & Letter
A4 & Letter
Letter & A4
Converts the original document size to the finished
copy size
To reduce or enlarge by a specific percentage, see “Manual Zoom” on page 18.
Note:
If you select Auto Fit Page to copy a document with white or very light colored edges,
the original size may not be recognized correctly, creating an incorrect copy size. If this
occurs, use the manual zoom to adjust the size of your copy (see page 18).
16 Copying
Copy Layout
If you want to make copies with a special layout (for example, borderless copies or
several copies on one sheet), use the Copy Layout menu.
To select a special layout:
1. Press the Menu button.
2. Press the green button next to the LCD screen until you see Copy Layout
displayed, then press OK.
3. Continue pressing the green button next to the LCD screen until you see the
desired layout setting, then press OK.
Here are the layout settings you can choose from:
Copy Layout
Results
Standard
Copies your original with a normal
margin (0.12 inch or 3 mm)
BorderFree™
Sizes your original as necessary to fit
to the edges of 4 × 6, 5 × 7, or 8 × 10
paper*
Min Margins
Copies your original with a 0.06-inch
(1.5 mm) border around the edges*
8
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
8
1
8
15
22
29
2
9
16
23
30
3
10
17
24
31
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
1
8
15
22
29
2
9
16
23
30
3
10
17
24
31
Repeat
Prints an image multiple times on one
sheet; select 4, 9, or 16 images per
sheet, or Auto to print your image as
many times as it will fit (prints full-size;
works best with small images)
Poster
Prints the original image on separate
sheets (4, 9, or 16) that you can paste
together to make a large poster
Changing Copy Settings 17
Copy Layout
Results
2-up
Copies two originals onto one sheet
4-up
Copies four originals onto one sheet
Wallet Photo
Prints nine wallet-size copies of the
photo on the page.
*
If print quality declines at the bottom of the page, use the Standard layout setting.
Copy Density
To make your copies lighter or darker, use the Copy Density menu:
1. Press the Menu button.
2. Press the green button next to the LCD screen until you see Copy Density
displayed, then press OK.
3. Press the green buttons (next to - and +) to lighten or darken your copies, then
press OK.
Manual Zoom
You can manually adjust the size of your copies from 25% to 400%:
1. Press the Menu button.
2. Press the green button next to the LCD screen until you see Optional Zoom
displayed, then press OK.
3. Use the number keypad to enter the size percentage, then press OK.
18 Copying
Using Memory Cards
These sections tell you what kind of memory cards you can use with your
CX6600, and how to insert them.
■
“Compatible Memory Cards” below
■
“Inserting a Memory Card” on page 20
■
“Using Your CX6600 as a Card Reader” on page 21
See also “Printing from a Card” on page 23 and “Scanning to a Card” on page 30.
Compatible Memory Cards
You can use the following types of cards with your CX6600:
Slot
Type of card
A
Memory Stick®
MagicGate Memory Stick
Memory Stick PRO
SD Card
MultiMediaCard
Memory Stick Duo (adapter required)
miniSD Card (adapter required)
B
SmartMedia™
xD-Picture Card
C
CompactFlash™
Microdrive™
Slot A
Slot B
Slot C
Memory card
light
19
Inserting a Memory Card
1. Make sure the CX6600 is turned on.
2. If you will be printing from or scanning to the card, make sure your CX6600
is not connected to your computer (or your computer is turned off ).
If you want to copy images between the card and your computer, leave the
computer connected. Any images stored on the card will be automatically
copied to your computer once you insert the card (see page 21).
3. Open the memory card cover.
4. Make sure the memory card light (next to the memory card slots) is not
flashing and that no cards are in any of the slots. Then insert a card into the
correct slot, as shown on page 19.
Note:
Do not insert more than one card at a time, or you may not be able to tell which
card your images are being read from.
After the CX6600 reads the card, if it finds any images saved in a compatible
format (see note below), you see the following screen:
Found Images...
Total XXX
OK
5. Press the button next to OK (shown on the LCD screen).
20 Using Memory Cards
To remove the card, pull it straight out of its slot.
Caution:
Do not remove the card or turn off the CX6600 while the memory card light is flashing,
or you may lose data on the card.
Note:
Your image files must meet these requirements:
File format
JPEG or TIF format image files (supports Exif version 2.1/2.2)
Media format
DCF (Design rule for Camera File system) version 1.0
Image size
Vertical 120 to 4600 pixels, horizontal 120 to 4600 pixels
Using Your CX6600 as a Card Reader
You can use your CX6600 as an external card reader, letting you copy images from
a memory card to your computer, or vice versa. To use this feature with Windows®
98SE or Me, make sure you installed your CX6600 software as described on the
Start Here sheet (this automatically installs the necessary USB storage drivers).
1. Make sure your CX6600 is turned on and connected to your computer.
2. Insert a memory card as described in the previous section. (If you’ll be copying
images to the card, make sure the card’s write-protect tab, if it has one, is set to
allow writing on the card.)
Note:
If this is your first time inserting a card, see “Using Epson CardMonitor” on
page 22 to set up Epson CardMonitor.
3. Once the card is inserted, it appears as a removable drive icon on your
computer. Copy images to or from the card, as needed.
Note:
If you copy images to the card, the number of images shown on the LCD screen
does not automatically change. You must remove and reinsert the card to make the
CX6600 recognize the new images.
Using Your CX6600 as a Card Reader 21
Using Epson CardMonitor
You can use Epson CardMonitor to automatically copy images to your computer
whenever you insert a card. You can also pick an application to automatically open
and help you edit your pictures.
Follow the instructions below for your operating system.
Windows
1. If your computer (Windows XP or 2000) asks you what you want to do when
you insert a card, select Startup CardMonitor, click the checkbox for
Always do the selected action, and click OK.
2. If this is your first time inserting a card, you
see a screen like this one:
Click Next.
3. The Epson PhotoStarter setup assistant opens.
Follow the instructions on the screen to set up
Epson CardMonitor.
Macintosh
1. Open the Applications folder,
then double-click Image Capture.
You see a screen like this one:
2. From the Image Capture menu,
select Preferences. You see this
screen:
3. From the Camera Preferences
drop-down list, select Other. A
new Applications folder opens.
Select Other
4. Open the Epson CardMonitor folder, then select Epson CardMonitor.
5. Click the Open button.
6. Close the Image Capture utility.
7. CardMonitor will now open automatically when you insert a card. Follow the
instructions on the screen to set up Epson CardMonitor.
22 Using Memory Cards
Printing from a Card
The CX6600 lets you print photos directly from your digital camera’s memory
card—you don’t even have to connect the CX6600 to a computer.
If your memory card contains photos taken with a camera that supports DPOF
(Digital Print Order Format), you can pre-select the photos you want to print
while the card is still in the camera.
See these sections:
■
“Printing an Index Form” below
■
“Selecting Photos to Print” on page 24
■
“Printing with DPOF” on page 26
■
“Choosing Print Settings” on page 27
Printing an Index Form
In most cases, you’ll want to print an “index form” before printing any photos
from your memory card. An index form lets you see small thumbnail images of
the pictures on your card and select just the ones you want to print.
1. Make sure your CX6600 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see “Inserting a Memory
Card” on page 20).
Once the card is inserted, the CX6600 reads and displays the number of
printable images on the card (only images in a compatible JPEG or TIF file
format are detected).
2. Press the Card Print button to enter Card Print mode.
3. Press the green button next to the LCD
screen until Print Index appears, then
press the green OK button.
Print Index
23
4. Load several sheets of plain, letter-size paper. (If there are more than 36
images on the card, you will need multiple sheets to print the index.)
5. Press the x Color button to print the index. After the index form prints,
Scan Index appears on the LCD screen. Leave your memory card in the
CX6600 and see the instructions below for printing your photos.
Selecting Photos to Print
You can select the photos you want to print either by filling in the ovals on the
index form and scanning it (below), or by selecting a photo or range of photos
from the control panel (page 25).
Selecting Photos with the Index Form
1. Once you have printed the index form, fill in the oval beneath each photo you
want to print with a dark pen or pencil.
OK:
Not OK:
2. Near the bottom of the form, select the type and size of paper you want to use.
You can select from these options:
Option
Available paper types
Glossy - 4 × 6
Glossy - 5 × 7
Glossy - Letter
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Semigloss Photo Paper
DB Photo - 4 × 6
DB Photo - Letter
Epson DURABrite Ink Glossy Photo Paper
Matte - Letter
Epson Matte Paper Heavyweight
PremierArt Matte Scrapbook Paper for Epson
3. Load the type of paper you’ve chosen to print on (see “Loading Paper” on
page 9).
24 Printing from a Card
4. Make sure Scan Index appears on the control panel, then press OK. (If it
doesn’t appear, press the Card Print button, press the green button next to
the LCD screen until you see Scan Index, then press OK.)
5. Place the index form face-down on the scanner, so that the top of the form is
aligned against the left edge of the glass (see page 29).
6. Press the x Color button. The form is scanned and your photos are
automatically printed.
Selecting Photos from the Control Panel
1. Once you have printed the index form, identify a photo or range of
consecutive photos you want to print.
2. Make sure you’re in Card Print mode (if necessary, press the Card Print
button).
3. Press the green button next to the LCD
screen to select One image, Range of
images, or All images, then press OK.
Select images
4. If you want to print one image or a range
of images, follow the instructions on the
screen and use the number keypad to
select the images you want to print,
then press OK.
5. Enter the number of copies of each photo you want to print (up to 99),
then press OK.
Note:
The number of copies is how many times each photo prints, not the number of
pages. For example, if you’re using a layout that fits 8 photos and you select 3
copies, you will get one sheet with 3 photos printed on it.
6. Change any print settings, as needed (see page 27). You can select the paper
type, paper size (unless you’re using plain paper), and layout.
Note:
The number of pages cannot be selected; it is determined automatically by your
chosen layout and number of copies.
7. Load the type of paper you’ve chosen to print on (see “Loading Paper” on
page 9).
8. Press the x Color button. Your photos are printed.
Selecting Photos to Print 25
Printing with DPOF
Follow these steps if you’ve already selected the photos you want to print using
your camera’s DPOF feature.
1. Insert a memory card containing DPOF image files (see “Inserting a Memory
Card” on page 20).
2. Press the Card Print button to enter Card Print mode.
3. Press the green button next to the LCD screen to select DPOF, then press OK.
4. Using the number keypad, enter the number of copies of each photo you want
to print (up to 99), then press OK.
Note:
The number of copies is how many times each photo prints, not the number of
pages. For example, if you’re using a layout that fits 8 photos and you select 3
copies, you will get one sheet with 3 photos printed on it. If you want more prints
than your layout can hold, just select that number of copies.
5. Change any print settings, as needed. You can select the paper type, paper size
(unless you’re using plain paper), and layout. See “Choosing Print Settings”
on page 27 for details.
Note:
The number of pages cannot be selected; it is determined automatically by your
chosen layout and number of copies.
6. Load the type of paper you’ve chosen to print on (see “Loading Paper” on
page 9).
7. Press the x Color button. Your photos are printed.
26 Printing from a Card
Choosing Print Settings
Before printing your selected photos, you may need to adjust some of these
settings.
Paper Type
Paper type
If you have loaded special paper, use this
button to select one of the paper type settings
listed below:
If you have loaded this kind of paper...
Select this setting...
Plain paper
Epson Bright White Photo Paper
Plain
Epson Matte Paper Heavyweight
PremierArt Matte Scrapbook Paper for Epson
Matte
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Glossy
Epson DURABrite Ink Glossy Photo Paper
DB Photo
Paper Size
Paper size
Use this button to select the size of paper
you’ve loaded. Choose one of these sizes:
LTR (letter), 4 × 6, 5 × 7, or 8 × 10.
(Some sizes are not available, depending
on the selected paper type.)
Note:
If printing 4 × 6 photos, do not use paper with micro perforated edges. Instead, select
one of the papers listed on page 11.
Choosing Print Settings 27
Layout
Use this button to select one of these layout
settings:
Layout
Setting
Results
B-Free
Prints without margins (BorderFree) so that the image covers the
whole page.
1-up
2-up
4-up
8-up
20-up
80-up
Prints one or more photos per page. For example, 8-up prints up to 8
photos per page.
(The actual number may be less, depending on the number of
photos or the number of copies you’ve selected. For example, if you
select 5 copies for an 8-up layout, only 5 photos will print on the
page. If you select more than 8 copies, you will need additional
sheets to print your photos.)
The size of each photo is adjusted automatically for the layout and
paper size.
Upper1/2
Prints only on the upper half of each page
28 Printing from a Card
Scanning to a Card
Follow the instructions in these sections to scan your photos and other documents
directly to a memory card.
■
“Placing Your Original Document” below
■
“Scanning to a Card” on page 30
Placing Your Original Document
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper left corner. Move
your document about 1/8 inch from the top and side edge so your entire
document is scanned.
Move the document
about 1/8 inch from the
edges to avoid cropping
3. Close the scanner lid.
Note:
If you place your document against the guides, the edges next to the guides won’t
be scanned.
If you need to scan a thick document, such as a book, you can remove the scanner
lid. Gently press down the original to keep it flat on the document table. Be sure to
replace the scanner lid when you’re finished.
29
Scanning to a Card
Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6600 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see page 20).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
2. Press the Scan button to enter Scan Mode.
3. Press the green button next to the LCD screen until To Photo Card appears,
then press OK.
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either To PC or To E-mail, then see your on-screen Reference
Guide for details.
4. Select the document type (Text or Graphic).
5. Select Auto as the scan area. (If the edges of
your document are light in color, they may
not be detected and part of your image may
be cut off; in that case, select Max. to scan
the entire area.)
6. For ordinary documents, select Normal as
the quality of the scanned image. For
higher quality, select either Fine (for text)
or Graphic (for photos).
Document type
Scan area
Image quality
Note:
Higher quality images take up more space on the memory card.
7. Press the button next to OK (shown on the LCD screen).
8. Make sure your original document is placed on the scanner glass, then press
the x Color button to start scanning. Your image is saved to the “epscan”
folder on the memory card.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6600.
9. Wait until scanning finishes and the memory card light stops flashing, then
remove the card.
30 Scanning to a Card
Maintaining Your CX6600
If you notice a decline in print quality, follow the instructions in this chapter to
check and clean the print head. You’ll also find instructions on checking ink levels
and replacing the ink cartridges.
See these sections:
■
“Cleaning the Print Head” below
■
“Replacing Ink Cartridges” on page 33
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or you notice light or dark bands
across your printout, you may need to clean the print head. This unclogs the
nozzles so they can deliver ink properly.
Note:
Print head cleaning uses ink, so clean it only if quality declines.
If you notice that text or straight vertical lines appear jagged, you may need to align the
print head. See your on-screen Reference Guide for details.
Running a Nozzle Check
1. Make sure the CX6600 is turned on, paper is loaded, and the red ! error light
is off. (If the ! error light is on, check the LCD screen to see if you have to
replace an ink cartridge.)
2. Press the Setup button to enter Setup Mode.
3. Press the green button next to the LCD screen until you see Nozzle check
displayed, then press the x Color button to print the nozzle check.
31
4. After the nozzle check finishes printing, make sure each line is complete,
without any gaps or missing dots:
If any dots are missing, as shown below, clean the print head as described in
the next section.
Running the Head Cleaning Utility
If you need to clean the print head, follow these steps:
1. Press the Setup button to enter Setup Mode.
2. Press the green button next to the LCD screen until you see Head Cleaning
displayed, then press the x Color button.
The CX6600 runs a head cleaning cycle, and you see the message
“Head cleaning . . .” on the LCD screen.
Caution:
Never turn off the CX6600 while head cleaning is in progress, or you may damage
the CX6600.
3. When the message “Head cleaning . . .” disappears, repeat the nozzle check
(see page 31) to verify that the print head is clean.
If you don’t see any improvement after cleaning three or four times, turn off
the CX6600 and wait overnight. This lets any dried ink soften. Then try
cleaning the print head again the next day.
32 Maintaining Your CX6600
Replacing Ink Cartridges
To check ink levels, follow these steps:
1. Press the Setup button to enter Setup Mode.
2. Press the green button next to the LCD screen until Ink Levels is displayed,
then press the x Color button.
You see the amount of ink available in each cartridge: C (Cyan), M (Magenta),
Y (Yellow), K (Black).
Note:
To view all the ink levels, wait for them to scroll across the screen.
Ink levels
C:50% M:50% Y:50%
3. When done, press the OK button.
When your ink starts getting low, make sure you have replacement cartridges
available. You cannot print if an ink cartridge is empty.
Installing New Cartridges
Make sure you have a new ink cartridge before you begin. Use these cartridges:
*
Color
Part number
Black
T0441 (standard capacity)*
T0431 (high capacity)*
Cyan
T0442
Magenta
T0443
Yellow
T0444
Availability of black ink cartridge types varies by location. The high capacity black ink
cartridges are recommended as replacement cartridges for this printer for users
who print frequently. Users that print infrequently may want to choose the standard
capacity black ink cartridge. Your printer includes the high capacity black ink
cartridge.
Replacing Ink Cartridges 33
Follow the steps below to replace an ink cartridge:
Caution:
Leave the empty cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your CX6600 not covered by Epson’s warranty.
1. If an ink cartridge is empty:
Look at the LCD screen to see which cartridge is empty, then press the
x Color button.
If an ink cartridge is low:
Press the Setup button to enter Setup Mode, then press the green button next
to the LCD screen until Replace Ink is displayed. Then press the x Color
button.
2. Lift up the scanner
3. Wait for the ink cartridge holder to move over as shown, then open its cover.
34 Maintaining Your CX6600
4. Identify the cartridge you need to replace. Press in the tab at the back of the
cartridge, then lift it straight out. Dispose of it carefully.
Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in
your eyes, flush them thoroughly with water.
Keep cartridges out of the reach of children.
5. Before unwrapping the new cartridge, shake it gently four or five times. Then
remove it from its wrapper.
6. Insert the new cartridge into the holder. Press down firmly until it clicks into
place.
7. Close the ink cartridge cover.
Replacing Ink Cartridges 35
8. Lower the scanner.
The CX6600 begins charging the ink delivery system and “Charging . . .”
appears on the LCD screen. Wait for charging to finish before using your
CX6600.
Caution:
Never turn off the printer while “Charging . . .” appears on the LCD screen, unless
the CX6600 hasn’t moved or made noise for more than 5 minutes.
36 Maintaining Your CX6600
Solving Problems
If you have a problem with your Stylus CX6600, check the messages on the LCD
screen, run a nozzle check (see page 31), or see “Problems and Solutions” below.
For problems with scanning or printing from your computer, double-click the
CX6600 Reference Guide icon on your computer desktop.
If none of these solutions solves your problem, see “Where To Get Help” on
page 39.
Problems and Solutions
Check the solutions below if you’re having trouble using your CX6600 in
stand-alone mode.
Copying Problems
■
Make sure your paper is positioned on the right side of the sheet feeder,
behind the feeder guard, then slide the left edge guide against the paper
(but not too tightly). Don’t load paper above the arrow on the left edge guide.
■
Make sure your paper is loaded short edge first.
■
Make sure your original is positioned in the top-left corner of the glass, with
the short edge at the left (see page 29). Place it approximately 1/8 inch from
the edge of the glass to avoid cropping.
■
Make sure you select the copy layout you want. See page 17 for instructions.
■
If you select Auto Fit Page to copy a document with white or very light
edges, the original size may not be recognized correctly. Select Actual as the
Reduce/Enlarge setting and use the Optional Zoom setting to adjust the size
of your copy.
37
Paper Feeding Problems
■
If paper doesn’t feed, remove it from the sheet feeder. Fan the paper, load it
against the right side, behind the feeder guard, and slide the left edge guide
against the paper (but not too tightly).
■
If paper jams, follow these steps:
1. Press the P On button to turn off the CX6600.
2. Lift up the scanner and remove any paper that’s inside, including any
small pieces that may have torn off.
Caution:
Clear paper jams by pulling the paper out towards the front of the CX6600.
Never pull the paper out in the direction of the sheet feeder.
3. Turn the CX6600 back on and reload the paper. Make sure the edges are
not creased or folded.
Copy Quality Problems
If you have any problems with the quality of your copies, try these solutions:
■
Make sure the document is placed flat against the document table glass. If
only part of the image is blurred, your document may be wrinkled or warped.
■
Make sure the CX6600 is not tilted or placed on an uneven surface.
■
Clean the print head; see page 31 for instructions.
■
If a dotted line appears in the image, clean the scanner glass with a soft, dry,
lint-free cloth (paper towels are not recommended). If the glass is still not
clean, use a small amount of glass cleaner on a soft cloth. Make sure you wipe
off any remaining liquid. Don’t spray glass cleaner directly on the glass.
■
Make sure your paper isn’t damp, curled, or loaded face down (the printable
side should be face up). Load new paper face up. Use Epson papers for proper
saturation and absorption of genuine Epson inks.
■
Use a support sheet with special paper or load your paper one sheet at a time.
■
If you notice jagged vertical lines, you may need to align the print head. See
your on-screen CX6600 Reference Guide for instructions.
■
The ink cartridges may be old or low on ink; see page 33 for instructions on
replacing an ink cartridge.
38 Solving Problems
Where To Get Help
If you need help with your Epson Stylus CX6600 or EPSON Scan software, see
“Epson Support” below.
If you need help with any other software that came with your CX6600, see “Other
Software Technical Support” on page 40.
Epson Support
Epson provides technical assistance 24 hours a day through the electronic support
services and automated telephone services listed in the following table:
Service
Access
World Wide
Web
From the Internet, you can reach Epson Support at
http://support.epson.com. At this site, you can download
drivers and other files, look at product documentation, access
troubleshooting information, and receive technical advice
through e-mail.
Automated
Telephone
Services
A variety of automated help services are available 24 hours a day,
seven days a week. To use these services, you must have a touch
tone telephone and call (800) 922-8911. Your Epson
SoundAdviceSM Express Code is 70575. Use this code to quickly
select the Epson Stylus CX6600 in SoundAdvice.
To speak to a technical support representative, dial:
■
U.S.: (562) 276-4382, 6 AM to 6 PM, Pacific Time, Monday through Friday
■
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through
Friday
Toll or long distance charges may apply.
Where To Get Help 39
Before you call, please have the following information ready:
■
Product name (Epson Stylus CX6600)
■
Product serial number (located on the back of the unit)
■
Proof of purchase (such as a store receipt) and date of purchase
■
Computer configuration
■
Description of the problem
You can purchase ink cartridges, paper, manuals, and accessories from the
Epson Store at (800) 873-7766 or visit www.epsonstore.com (U.S. sales only).
In Canada, please call (800) 463-7766 for dealer referral.
Other Software Technical Support
Software
Telephone
Fax
Online and E-mail
EPSON Smart
Panel™
(510) 445-8616
(510) 445-8601
www.newsoftinc.com
ArcSoft
PhotoImpression™
(510) 440-9901
8:30 AM–5:30 PM,
Pacific Time,
Monday through
Friday
(510) 440-1270
(510) 226-6719
(510) 226-6069
ABBYY®
FineReader® Sprint
40 Solving Problems
tech@newsoftinc.com
www.arcsoft.com/
techmain
support@arcsoft.com
www.abbyyusa.com
support@abbyyusa.com
Notices
Important Safety Instructions
Before using your Epson Stylus CX6600, read and follow these safety instructions:
■
Be sure to follow all warnings and instructions marked on the Stylus CX6600.
■
Use only the type of power source indicated on the Stylus CX6600 label.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets on
the same circuit as air control systems or other high-load devices that regularly switch
on and off.
■
Place the Stylus CX6600 near a wall outlet where the plug can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée
facilement.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the Stylus CX6600, make sure the total ampere
rating of the devices plugged into the extension cord does not exceed the cord’s
ampere rating. Also, make sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet’s ampere rating.
■
Avoid electrical outlets controlled by wall switches or automatic timers.
■
Keep your Stylus CX6600 and computer system away from potential sources of
electromagnetic interference, such as loudspeakers or cordless telephone base units.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■
Leave enough room around the Stylus CX6600 for sufficient ventilation.
■
Do not place the Stylus CX6600 near a radiator or heating vent or in direct sunlight.
■
Place the Stylus CX6600 on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle. Leave enough space
in front of the Stylus CX6600 (at least 9 inches) so it doesn’t tip forward and fall off
of the work surface.
■
Turn off and unplug the Stylus CX6600 before cleaning. Clean with a damp cloth
only. Do not spill liquid on it.
■
Always turn the Stylus CX6600 off using the P On button. Don’t turn off the power
using a switch on a power strip or unplug the Stylus CX6600 until the On light is off.
41
■
Do not block or cover openings in the Stylus CX6600 case or insert objects through
the slots.
■
Except as specifically explained in your documentation, do not attempt to service the
Stylus CX6600 yourself.
■
Unplug the Stylus CX6600 and refer servicing to qualified service personnel under
the following conditions: if the power cord or plug is damaged; if liquid has entered
the product; if the product has been dropped or the case damaged; if the product does
not operate normally or exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
■
Before transporting the Stylus CX6600, make sure the print head is capped in the far
right position and the ink cartridges are in place.
■
This product includes a lamp component that contains mercury (Hg). Please consult
your state and local regulations regarding disposal or recycling. Do not put in the
trash.
Ink Cartridge Safety Instructions
■
Leave the ink cartridges installed. Removing the cartridges can dehydrate the print
head and may prevent the Stylus CX6600 from printing.
■
Keep ink cartridges out of the reach of children and do not drink the ink.
■
Be careful when you handle used ink cartridges; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water.
■
Do not put your hand inside the Stylus CX6600 or touch the cartridge during
printing.
■
Do not move the print head by hand; otherwise you may damage the Stylus CX6600.
■
Install the ink cartridge immediately after you remove it from its package. Leaving the
cartridge unpacked for a long time before use may result in reduced print quality.
■
Do not use an ink cartridge beyond the date printed on the cartridge package. For
best results, use up the ink cartridges within six months of first installing them.
■
Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom
of its package faces down.
■
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.
■
Do not remove or tear the label on an ink cartridge; this can cause leakage.
■
Do not dismantle the ink cartridges or try to refill them. This could result in damage
to the print head.
42 Notices
■
Do not touch the green IC chip on the side of the cartridge. This may affect normal
operation and printing.
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
dust and store it in the same environment as the Stylus CX6600. Note that there is a
valve in the ink supply port, making covers or plugs unnecessary, but care is needed to
prevent the ink from staining items that the cartridge touches. Do not touch the ink
cartridge ink supply port or surrounding area.
LCD Panel Safety Instructions
■
Use only a dry soft cloth to clean the LCD display. Don’t use liquid or chemical
cleaners.
■
If the LCD display is damaged, contact your dealer.
■
If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water.
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
FCC Compliance Statement 43
WARNING
The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC Certification of this device and may cause interference levels which
exceed the limits established by the FCC for this equipment. It is the responsibility of the
user to obtain and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables connected to
unused interfaces. Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
For Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Declaration of Conformity
According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We:
Located at:
Epson AMERICA, INC.
MS 3-13
3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR
Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is
identical to the representative unit tested and found to be compliant with the standards.
Records maintained continue to reflect the equipment being produced can be expected to
be within the variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR §2.909. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Trade Name:
Epson
Type of Product: Multifunction printer
Model:
C161A
44 Notices
ENERGY STAR Compliance
As an ENERGY STAR Partner, Epson has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
The EPA ENERGY STAR office equipment program is a voluntary
partnership with the computer and office equipment industry to
promote the introduction of energy-efficient personal computers,
monitors, printers, fax machines, and copiers in an effort to reduce
air pollution caused by power generation.
Epson America, Inc. Limited Warranty
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser
that the EPSON printer covered by this limited warranty statement, if purchased and
operated only in the United States or Canada, conforms to the manufacturer’s
specifications and will be free from defects in workmanship and materials for a period of
one (1) year from the date of original purchase. Epson also warrants that the consumable
ink cartridges enclosed with the printer will perform to the manufacturer’s specified usage,
which usage may expire before the expiration of the limited warranty for the EPSON
printer. For warranty service, you must provide proof of the date of original purchase.
What Epson Will Do To Correct Problems: Should your EPSON printer prove defective
during the warranty period, please call the EPSON ConnectionSM at (562) 276-4382
(U.S.) or (905) 709-3839 (Canada) for warranty repair instructions and return
authorization. An Epson service technician will provide telephone diagnostic service to
determine whether the printer requires service. If service is needed, Epson will, at its
option, exchange or repair the printer without charge for parts or labor. If Epson
authorizes an exchange for the defective unit, Epson will ship a replacement printer to you,
freight prepaid, so long as you use an address in Canada or the U.S. (excluding Puerto
Rico and U.S. Possessions). Shipments to other locations will be made freight collect. You
are responsible for securely packaging the defective unit and returning it to Epson within
five (5) working days of receipt of the replacement. Epson requires a debit or a credit card
number to secure the cost of the replacement printer in the event that you fail to return the
defective one. If your printer is being repaired, Epson will direct you to send your printer
to Epson or its authorized service center, where the printer will be fixed and sent back to
you. You are responsible for packing the printer and for all costs to and from the Epson
authorized service center. When warranty service involves the exchange of the printer or a
part, the item replaced becomes Epson property. The replacement printer or part may be
new or refurbished to the Epson standard of quality, and, at Epson’s option, may be
another model of like kind and quality. Epson’s liability for replacement of the covered
ENERGY STAR Compliance 45
printer will not exceed the original retail selling price of the covered printer. Exchange
products and parts assume the remaining warranty period of your original product covered
by this limited warranty.
What This Warranty Does Not Cover: This warranty does not apply to refurbished or
reconditioned products. This warranty covers only normal use in the United States and
Canada. This warranty is not transferable. This warranty does not cover any color change
or fading of prints or reimbursement of materials or services required for reprinting. This
warranty does not cover damage to the EPSON product caused by parts or supplies not
manufactured, distributed or certified by Epson. This warranty does not cover ribbons,
ink cartridges or third party parts, components, or peripheral devices added to the EPSON
product after its shipment from Epson, e.g., dealer or user-added boards or components.
Epson is not responsible for warranty service should the Epson label or logo or the rating
label or serial number be removed or should the product fail to be properly maintained or
fail to function properly as a result of misuse, abuse, improper installation, neglect,
improper shipping, damage caused by disasters such as fire, flood, and lightning, improper
electrical current, software problems, interaction with non-Epson products, or service
other than by an Epson Authorized Servicer. If a claimed defect cannot be identified or
reproduced, you will be held responsible for the costs incurred.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME
LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF
THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE
LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS
STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS MADE BY ANY
OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS
WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS
AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR
DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY
TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY OR ANY OTHER LEGAL THEORY.
In Canada, warranties include both warranties and conditions.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, and
some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary from jurisdiction
to jurisdiction.
Epson America, Inc. ■ P.O. Box 93012 ■ Long Beach, CA 90809-3012
46 Notices
Printed in XXXXXX
XX.XX-XX
Download PDF