Advantech | AIMB-210 | AIMB-210 (Intel® Atom™ processor N270 1.6 GHz FSB

AIMB-210 (Intel® Atom™ processor N270 1.6 GHz
FSB 533 MHz Mini ITX Motherboard with VGA, LVDS,
TV-Out, 6 COM, Dual GbE, 8 USB, 2 SATA II)
Startup Manual
Specifications
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1.
AIMB-210 Intel® Atom™ processor N270 Mini-ITX
Motherboard
2.
IDE HDD cable (40 pin) x 1
3.
SATA HDD cable x 2
4.
SATA Power cable x 2
5.
Serial port cable x 3
6.
I/O port bracket x 1
7.
Startup manual x 1
8.
Driver CD x 1
9.
Warranty card x1
Optional Cable
1.
Parallel cable with bracket
(P/N: 1700008809)
2.
Dual port USB cable
(P/N: 1700002204)
(27 cm) with bracket
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/readstep.html
(Acrobat is a trademark of Adobe).
Standard SBC functions
• CPU: Intel® Atom™ processor N270 1.6 GHz FSB 533
MHz
• BIOS: Award 16 Mbit SPI
• Chipset: Intel 945GSE with ICH7M
• System Memory: Up to 2 GB; 200-pin SODIMM x 1,
Singel-channel 400/533 MHz DDR2
• SATA2 Interface: Two onboard Serial ATA connectors
and data transfers up to 150 MB/s
• IDE Interface: One onboard IDE connector supporting
up to two enhanced IDE devices. Supports PIO mode
4 (16.67 MB/s data transfer rate) and ATA 33/66/100
(33/66/100 MB/s data transfer rate) BIOS enabled/disabled
• CF interface: Supports compact flash Type II
• Serial ports: Six serial ports, COM1, COM3, COM4,
COM5 and COM6 are RS-232; COM2 is RS-232/422/485
• Parallel port: One parallel port, supports SPP/EPP/ECP
mode (with pin header)
• Keyboard/mouse connector: Supports one standard
PS/2 keyboard, one standard PS/2 mouse
• Watchdog timer: 1~255 level timer intervals
• USB 2.0: Supports up to eight USB 2.0 ports, four external ports and four onboard pin headers
• GPIO: 16-bit general purpose Input/Output
Graphic Interface
• Controller: Chipset integrated VGA controller
• Display memory: Dynamically shared system memory
up to 224 MB
• CRT: Up to 2048x1536 at 75 Hz maximum resolution,
400MHz RAMDAC
• LVDS interface: Supports up to UXGA (1600X1200)
• LVDS port: Supports dual LVDS connectors.
- LVDS1: single channel 18-bit/dual channel 36-bit
For more information on this and other Advantech
products, please visit our website at:
- LVDS2 (Option) : single channel 24-bit/dual channel
48-bit
http://www.advantech.com
Ethernet Interface
http://www.advantech.com/eplatform
• Dual 10/100/1000Base-T GbE LAN Realtek RTL8111C
For technical support and service, please visit our
support website at:
Mechanical and Environmental
http://www.advantech.com/support
This manual is for the AIMB-210 series Rev.A1.
Part No. 2006021010
1st Edition,
Print in Taiwan
Feb. 2009
• Dimensions (L x W): 170 x 170 mm
• Power supply voltage: 3.3 V, +5 V, 12 V, +5 Vsb, -12 V
• Power requirements: +5 V @ 1.96 A, +3.3 V @ 1.21 A,
+12 V @ 0.19 A, 5 VSB @ 0.28, -12 V@ 0.06 A. Measure of the maximum current values with system under
maximum load
AIMB-210 Startup Manual Specifications
• Operating temperature: 0 ~ 60° C
• Weight: 0.365 kg (weight of board)
Jumpers and Connectors
The board has a number of connectors and jumpers that
help to configure the system to suit your application requirements. The tables below list the function of each of the
connectors and jumpers.
Jumpers and Connectors
CF1
CF Socket
AUDIO1
Audio connector
FPAUD1
Audio Front Panel Pin Header
DIO1
GPIO Header
IDE1
IDE connector
EATXPWR1
ATX 20Pin Main power connector
LVDS1 Inverter Power
Label
Function
INV1
JFP1
Power Switch / Reset connector
INV2
LVDS2 Inverter Power
External speaker / Sata HDD LED
connector / SM Bus connector
LVDS1
LVDS1 connector (Internal)
LVDS2
LVDS2 connector (External)
Power LED
PCI1
PCI Slot
SATA1
Serial ATA1
System Off: OFF (AT)
SATA2
Serial ATA2
System Off: Slow flash (ATX)
DIMMA1
Memory connector channel
CMOS clear ( Default 1-2 )
BAT1
Battery Connector
JSETCOM2
COM2 RS232/422/485 Jumper
Setting
SPI_CN1
SPI flash update connector
JWDT1
Watchdog Reset
JLV1
LVDS1 LCD power 3.3 V/5 V selection
Default (1-2 , 3.3 V)
SPI_CN1
SPI BIOS socket
JLV2
LVDS2 LCD power 3.3 V/5 V selection
Default (1-2 , 3.3 V)
CMOS1: Clear CMOS
JPSON1
AT(1-2) / ATX(2-3) ( Default 2-3 )
Pins
Result
LPT1
Parallel connector
1-2*
Keep CMOS data*
USB56
USB port 5, 6 (on board)
2-3
Clear CMOS data
JFP2
JFP3 (Keyboard
Lock and Power
LED)
CMOS1
Suspend: Fast flash (ATX/ AT)
System On: ON (ATX/ AT)
USB78
USB port 7, 8 (on board)
VGA1
VGA connector
TVOUT1
TV-Out connector
COM12
Serial port: COM1 (RS232) and
COM2 (RS232, RS422 and RS485)
COM3
Serial port: COM3 (RS232)
COM4
Serial port connector
COM5
Serial port connector
COM6
Serial port connector
KBMS1
PS/2 Keyboard and Mouse connector
CPUFAN1
CPU FAN connector(3-pin)
SYSFAN1
System FAN connector(3-pin)
LAN1_USB12
LAN1 / USB port 1, 2
LAN2_USB34
LAN2 / USB port 3, 4
AIMB-210 Startup Manual
* Default
1
Keep CMOS data
1
Clear CMOS
Jumpers and Connectors
Jumpers and Connectors
JSETCOM2: COM2 RS232/422/485 Mode Selector
LVDS Connector: LVDS1/LVDS2 (Option)
Users can use JSETCOM2 to select among RS
232/422/485 modes for COM2. The default setting is
RS 232.
RS-232 Configuration
(default)
RS-422 Configuration
RS-485 Configuration
LVDS1
JLV1/JLV2: LCD Power 3.3 V/5.5 V Selector
LVDS2
Installation Note
Closed Pins Result
1-2*
3.3 V*
2-3
5V
JFP1
JFP2
JFP3
* Default
1
1
JFP1
3.3 V
5V
pin.1
#PWR_SW
pin.2
GND
JPSON1: ATX, AT Mode Selector
pin.3
#RST_SW
Closed Pins Result
pin.4
GND
1-2 locsed
1-2
AT Mode
2-3*
ATX Mode*
* Default
2-3 closed
*Power button pin is located in Pin 1 & 2 of front panel
connector.
1
1
AT Mode
ATX Mode
1-2 locsed
2-3 closed
JWDT1: Watchdog Timer Output Option
Closed Pins Result
1-2
NC
2-3*
System reset*
* Default
1
NC 1-2 Closed
Declaration of Conformity
The device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1.
This device may not cause harmful interference;
2.
This device must accept any interference received,
including interference that may cause undesired operation.
1
System Reset 2-3 Closed
AIMB-210 Startup Manual Software Installation
CAUTION
The CD disc contains a driver installer program that will
lead you through the installation os various device drivers
needed to take full advantage of your motherboard.
The computer is supplied with a battery-powered Real-time
Clock circuit. There is a danger of explosion if the battery is
incorrectly replaced. Replace only wih same or equivalent
type recommended by the manufaturer. Discard used batteries according to manufaturer’s instructions.
Board Diagram
Audio1
LAN2
USB34
LAN1
VGA1
USB12
COM3
TVOUT1
COM12
KBMS1
JLV2
LPT1
JSETCOM2
COM4
COM5
SYSFAN1
COM6
FPAUD1
INV2
USB56
LVDS2
INV1
LVDS1
USB78
JLV1
DIMM A1
SPI_CN1
CMOS1
PCI1
CF
DIO1
CPUFAN1
JPSON1
SATA1
AIMB-210 Startup Manual
IDE1
SATA2
JWDT1
EATXPWR1
JFP1
JFP2
1
2
3
4
2
8
JFP3
4
3
6
1
5
7
1
2
3
4
PWR-SW RESET
HDDLED
SPEAKER
5
PWR_LED & KEY LOCK
Download PDF