中间对折线
SGP Sequential Shifter User Guide
正面
Product Features
01
SGP Sequential Shifter Instructions
03
Quick Guide
• Dual-mode multi-angle adjustment
1. Fix the shifter handle to the lever and tighten it securely.
• Crafted from aviation-grade aluminum alloy
2. Attach the sequential shifter to the simulator stand or secure it to the desktop using the
desktop clamp.
• Equipped with a high-precision Hall sensor
3. Connect the sequential shifter to your computer using the included USB Type-B to
• Multi-function Handle
Type-A data cable. Alternatively, MOZA base with a shifter port can use the included
• Replaceable Shifter Knob
RJ11 cable instead.
• RGB mechanical buttons
4. Open MOZA Pit House, navigate to the illustrated sequential shifter page and ensure
that the device is correctly connected and that all inputs are signalling correctly.
Dimensions
319.5
02
Package Contents
04
52
181.5
• Sequential shifter
• Connection options: PC, compatible MOZA
• Shifter handle
• USB Type-B to Type-A data cable
165
125
40
20
16.5
25
bases, MOZA hub
• Materials: Aluminum alloy & high-strength
• RJ11 data cable
6- 8.5
Product Specifications
05
steel
• M6 screws and M6 washers
• Dimensions: 181.5 x 52 x 319.5 mm
• Hex wrench
• Mounting Holes: M6 threaded holes/M8
• External hex wrench
8-M6
through holes
• Net Weight: 1.7 Kg
中间对折线
SGP序列档使用说明
01
产品介绍
03
售后客服
• 双模式多角度可调
1. 将手柄把旋入连接杆并拧紧
• 高精度霍尔传感器
3. 使用包装内的USB Type-B转Type-A数据线连接序列档和电脑上的USB口；
（包装内的RJ11线
• 航空级铝合金
2. 将序列档固定在模拟器支架上或使用桌面夹固定在桌面上
• 多功能拉手
可以连接带序列档接口的MOZA基座）
• 换档头可更换设计
4. 打开MOZA Pit House，进入图示的序列档页面，确认设备是否正常连接以及各个挡位是否信
• RGB机械式按键
号正常
产品尺寸和固定孔位图
319.5
02
04
52
181.5
165
125
40
20
6- 8.5
16.5
25
背面
使用教程
8-M6
包装清单
• 序列档
• 手柄握把
• USB Type-B转Type-A数据线
• RJ11数据线
• M6螺钉及M6垫片
• 六角扳手
• 外六角扳手
尺寸：185*170mm
材质：80g书写纸 (双面 黑白 印刷 对折)
中间对折线
05
产品参数
• USB连接类型：PC、转接器、MOZA基座
• 材质：铝合金&高强钢
• 尺寸规格：181.5*52*319.5 mm
• 安装孔：M6螺纹孔/M8通孔
• 净重：1.7Kg
QC
PASS
03
">
