ViewSonic | VE150m | User guide | ViewSonic VE150m User guide

VE150m/VE150mb
LCD Display
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell’utente
Guia do usuário
Användarhandbok
Käyttöopas
Руководство пользователя
Podręcznik użytkownika
Full 15.0" Diagonal Viewable Screen
Contents
Product Registration..............................................................2
For Your Records ..................................................................2
Getting Started
Package Contents .................................................................3
Precautions ...........................................................................3
Quick Installation ...................................................................4
Using the LCD display
Setting the Timing Mode .......................................................5
OSD and Power Lock Settings..............................................5
Adjusting the Screen Image ..................................................6
Main Menu Controls ..............................................................8
Specifications ......................................................................11
Troubleshooting...................................................................12
Customer Support ...............................................................13
Cleaning the LCD display....................................................14
Limited Warranty .................................................................15
Appendix
Safety Guidelines ................................................................16
Compliance Information ......................................................17
CE Conformity .....................................................................17
06/28/02
ViewSonic
VE150m/VE150mb
1
Copyright © ViewSonic Corporation, 2002. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic
Wizard CD-ROM also provides an opportunity for you to print the registration form which you may
mail or fax to ViewSonic. Note: The Serial Number may be displayed from an on-screen display
menu.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:*
Purchase Date:
ViewSonic VE150m/VE150mb
VLCDS22574-1
VE150m-UG-192 (REV. 1C)
______________
______________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
* Remove the upper rear panel to find the Serial Number. For more information on removing the rear
panel, see page 4 of this user guide. The Serial Number is also on the UPC label on the box that the
product was shipped in.
ViewSonic
VE150m/VE150mb
2
Getting Started
Congratulations on your purchase of a VE150m/VE150mb color LCD display.
Important! Save the original box and all packing material for future shipping
needs.
NOTE: The word “Windows” in this user guide refers to the following Microsoft
operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000
and Windows Me (Millennium).
Package Contents
Your VE150m/VE150mb package includes:
• VE150m/VE150mb LCD display
• Quick Start Guide
• Power cord
• Video cable (attached)
• AC/DC Adapter
• ViewSonic Wizard CD-ROM (including user guide PDF file and INF/ICM
display optimization files)
IMPORTANT: The supplied INF file assures compatibility with Windows
operating systems, and the ICM file (Integrated Color Management) assures
accurate on-screen colors.
Precautions
• For best viewing conditions sit at least 18"
from the LCD display.
• AVOID TOUCHING THE SCREEN WITH
YOUR FINGERS. Oils from the skin are
difficult to remove.
• NEVER REMOVE THE REAR COVER. The
LCD display contains high-voltage parts. You
may suffer serious injury if you touch these
parts.
• Avoid exposing the LCD display to direct
sunlight or another heat source. The LCD
display should be facing away from direct
sunlight to reduce glare.
• Always handle your LCD display with care
when moving it.
• Place your LCD display in a well ventilated
area. Do not place anything on the LCD
display that prevents adequate dissipation of
heat.
• Ensure the area around the LCD display is
clean and free of moisture.
• Do not place heavy objects on the LCD
display, video cable, or power cord.
• If smoke, abnormal noise, or strange odor is
present, immediately switch the LCD display
off and call your dealer or ViewSonic. It is
dangerous to continue using the LCD display.
ViewSonic
VE150m/VE150mb
3
Quick Installation
1 Connect video cable
Make sure both the LCD display and
computer are powered OFF.
• Remove the middle and lower rear panels
as shown below.
• Connect the video cable from the LCD
display to the computer.
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic® Macintosh adapter,
contact ViewSonic Customer Support.
2 Connect power cord and AC/DC
adapter
Connect the power cord and AC/DC adapter
from the LCD display to a properly
grounded AC outlet.
3 Power-ON LCD display and
computer
Power-ON the LCD display, then power-ON
the computer. This sequence (LCD display
before computer) is very important.
NOTE: Windows 95, 98 or 2000 users may
receive a message asking them to install the
VE150m/VE150mb INF file.
3rd
Serial Number is
underneath upper
panel. Remove
the middle and
lower rear panels
before removing
the upper panel.
4 Install display optimization files
(INF and ICM files)
(1) Insert the ViewSonic Wizard CD-ROM
into your computer’s CD-ROM drive.
NOTE: If your computer does not have a
CD-ROM drive, see “Customer Support” on
page 13.
(2) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
(3) Follow the on-screen instructions.
5 Windows users: Set the timing
mode (resolution and refresh
rate)
Example: 1024 X 768 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card’s user
guide that came with your computer.
Installation is complete. Enjoy your new
VE150m/VE150mb LCD display.
To register your product go online to
www.viewsonic.com.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
AC IN (power)
Audio IN
Analog video OUT
(cable attached)
Video cable
1st
Pull this middle
panel off first
before
connecting
2nd
Pull this lower
panel off second
before connecting
cables
Audio cable
Computer
power cord
AC/DC adapter for LCD display power cord
ViewSonic
VE150m/VE150mb
4
Using the LCD display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example 1024 x 768) and refresh rate (or vertical frequency – example 60 Hz).
After setting the timing mode, use the OnView® controls (pages 8 - 10) to adjust
the screen image.
For best picture quality set the LCD display timing mode to:
VESA® 1024 x 768 @ 60 Hz
To set the Timing Mode:
1 Set the resolution: Right-click on the Windows® desktop > Properties >
Settings > Desktop Area or Screen Area for Windows 98 and newer > set
the resolution.
2 Set the refresh rate: See the user guide for your computer's graphics card.
WARNING: Do not set the graphics card in your computer to exceed the
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your LCD display.
OSD and Power Lock Settings
• OSD Lock: Press and hold [1] and the up arrow V for 10 seconds. If any
buttons are pressed the message OSD Locked will display for 5 seconds.
• OSD Unlock: Press and hold [1] and the up arrow V again for 10 seconds.
• Power Button Lock: Press and hold [1] and the down arrow W for 10
seconds. If the power button is pressed the message Power Button Locked
will display for 5 seconds. With or without this setting, after a power failure,
your LCD display’s power will automatically turn on when power is restored.
• Power Button Unlock: Press and hold [1] and the down arrow W again for
10 seconds.
ViewSonic
VE150m/VE150mb
5
Adjusting the Screen Image
Use the buttons on the front control panel to adjust the OnView® controls which
display on the screen. The OnView controls are explained at the top of the next
page and are defined in "Main Menu Controls" on page 8.
Main Menu with
OnView controls.
Front Control Panel
Decreases
Displays Main Menu
Mutes or
Sound Increases or exits control screen
and saves settings.
(on/off) Volume
Displays control screen for
highlighted control (or pair
of controls). Also, toggles
between two controls, on
some screens.
Press [2] for Auto Image
Adjust.
Power On/Off
Scrolls through options and also
increases or decreases a value.
ViewSonic
Power Light
Green=ON
Orange=Power
Saving
VE150m/VE150mb
6
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1]. From the Main Menu you can
also navigate to the other menus.
NOTE: All OnView menus and adjustment screens disappear automatically
after about 15 seconds.
2
3
4
5
To select a control you want to adjust, press V or W to scroll up or down the
Main Menu.
After the control is selected, press button [2].
To adjust the control, press the up V or down W buttons.
To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1024 x
768 @ 60Hz to the VE150m/VE150mb. (Look for instructions on "changing
the refresh rate" in your graphic card's user guide.)
• Select Image Adjust. (Button [2] on the LCD display control.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
LCD display.)
ViewSonic
VE150m/VE150mb
7
Main Menu Controls
The menu items shown below can be adjusted by using the up V and down W
buttons on the front of the LCD display.
Control
Explanation
Auto Image Adjust automatically sizes, centers, auto-contrasts
and fine tunes the video signal to eliminate waviness and
distortion.
Press the [2] button to obtain a sharper image.
NOTE: Auto tune works with most video cards. If this function
does not work on your LCD display, then lower the video refresh
rate to 60 Hz and set the resolution to its preset value.
Contrast/Brightness Contrast adjusts the difference between
the image background (black level) and the foreground (white
level). Brightness adjusts background black level of the screen
image. Press button [2] to toggle between Contrast and
Brightness.
Color Adjust displays the Color Adjust Menu explained below.
Color Adjust provides four color adjustment modes.
Video Enhanced Mode – improves colors including skin tones.
9300k – for a cooler, more blue image.
6500k – for a warmer, more red image.
User Color – Individual adjustments for red, green, and blue.
1 To select color (R, G or B) press button [2].
2 To adjust selected color, press V or W.
To deactivate Video Enhanced Mode, press the up and down
arrows V W simultaneous.
When you are finished making all color adjustments, press
button [1] twice.
ViewSonic
VE150m/VE150mb
8
Control
Explanation
Information displays an information menu showing technical
information and the product serial number. See below.
Image Adjust displays the Image Adjust menu.
The Image Adjust controls are explained below:
H./V. Position adjusts horizontal and vertical position of the
screen image. You can toggle between Horizontal and Vertical
by pressing button [2]. Horizontal moves the screen image to the
left or to the right. Vertical moves the screen image up and down.
H. Size (Horizontal Size) adjusts the width of the screen image.
Note: Vertical size is automatic with your LCD display.
Fine Tune Eliminates any remaining video artifacts (noise,
banding, out-of-phase, etc.)
Note: Try Auto Image Adjust first.
Sharpness adjusts the clarity and focus of the screen image.
ViewSonic
VE150m/VE150mb
9
Control
Explanation
Setup Menu displays the menu shown below.
The Setup Menu controls are explained below.
Language Select allows you to choose the language used in the
menus and control screens.
Resolution Notifier displays the Resolution Notice menu shown
below.
Resolution Notice advises the optimal resolution to use.
OSD Position allows you to move the on-screen display menus
and control screens.
OSD Timeout sets the length of time an on-screen display screen
is displayed. For example, with a “15 second” setting, if a
control is not pushed within 15 seconds, the display screen
disappears.
Memory Recall returns adjustments to the original factory
settings if the display is operating in a factory Preset Timing
Mode listed in this user guide.
Exception: This control does not affect changes made with the
User Color control.
ViewSonic
VE150m/VE150mb
10
Specifications
LCD
Type
15" (full 15" viewable diagonal area), TFT (Thin Film
Transistor), Active Matrix XGA
LCD, 0.297mm pixel pitch
RGB vertical stripe
Anti-Glare
Color Filter
Glass surface
Input signal
Video Sync
RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync
fh:30-60 kHz, fv:50-75 Hz
Compatibility
PC
Macintosh1
Up to 1024 x 768 Non-interlaced
Power Macintosh up to 1024 x 768
Resolution
Recommended
and supported
1024 x 768 @ 60, 70, 72, 75 Hz
800 x 600 @ 56, 60, 72, 75 Hz
640 x 480 @ 60, 75 Hz
640 x 400 @ 70 Hz
720 x 400 @ 70 Hz
Power
Voltage
100-240 VAC, 50/60 Hz (auto switch), 12V DC, 3A
Display area
Full Scan
304.1mm (H) x 228.1 mm (V)
12.0" (H) x 9.0" (V)
Operating
conditions
Temperature
Humidity
Altitude
32° F to + 104° F (0° C to + 40° C)
10% to 90% (no condensation)
To 10,000 feet
Storage
conditions
Temperature
Humidity
Altitude
-4° F to + 140° F (-20° C to + 60° C)
10% to 90% (no condensation)
To 40,000 feet
Dimensions
Physical
(LCD display only)
WxDxH
377.9 mm (14.7") x 137.75 mm (5.4") x 351 mm (13.8")
Weight
Net
4.5 kg (9.9 lb) LCD display only
Regulations
UL, CSA or cUL, FCC-B, CB, ISO13406-1, CE, TUV/GS, Ergo, E2000, NEMKO,
SEMKO, DEMKO, FEMKO, GOST-R (PCT ME06), PCBC, VCCI, BSMI, CCIB,
CCEE, PSB, IRAM, ENERGY STAR®
Power saving
modes
On
Active Off
Normal
<3W
(Green LED)
(Orange LED)
Preset Timing Mode (pre-adjusted to VESA® 1024 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may
result in permanent damage to the LCD display.
1
Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter,
contact ViewSonic “Customer Support” on page 13.
ViewSonic
VE150m/VE150mb
11
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the DC power supply
and the power supply is firmly connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
Power on but no screen image
• Make sure the video cable supplied with the LCD display is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the LCD display, tightly secure it
to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic® for a non-DDC
adapter.
Control buttons do not work
• Make sure OSD is not locked. Refer to “OSD and Power Lock Settings” on
page 5.
• Press only one button at a time.
ViewSonic
VE150m/VE150mb
12
Customer Support
For technical support or product service, see the table below or contact your
reseller.
NOTE: You will need the product serial number.
Country/
Region
Web site
T = Telephone Email
F = FAX
United States
viewsonic.com/
support
T: (800) 688-6688
F: (909) 468-1202
Canada
viewsonic.com/
support
T: (800) 688-6688
F: (909) 468-1202
service.us@
viewsonic.com
service.ca@
viewsonic.com
United Kingdom
viewsoniceurope.com T: 0800 833 648
F: (01293) 643910
service.eu@
viewsoniceurope.com
Europe, Middle
East, Baltic
countries, and
North Africa
viewsoniceurope.com Contact your
reseller
service.eu@
viewsoniceurope.com
Australia and New
Zealand
viewsonic.com.au
T: +61 2 9929 3955 service.au@
F: +61 2 9929 8393 viewsonic.com
Singapore/India
and Southeast
Asia
viewsonic.com.sg
T: 65 273 4018
F: 65 273 1566
Other Asia/Pacific
countries
viewsonic.com.tw
T: 886 2 2246 3456 service.ap@
F: 886 2 8242 3668 viewsonic.com
South Africa
viewsonic.com/asia
T: 886 2 2246 3456 service.ap@
F: 886 2 8242 3668 viewsonic.com
ViewSonic
service.sg@
viewsonic.com
VE150m/VE150mb
13
Cleaning the LCD display
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
To clean the screen:
1
2
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles.
If still not clean, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1
2
Use a soft, dry cloth.
If still not clean, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the LCD display screen or case. Some chemical cleaners have been
reported to damage the screen and/or case of the LCD display. ViewSonic will not
be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic
VE150m/VE150mb
14
Limited Warranty
VIEWSONIC LCD DISPLAY
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic LCD displays are warranted for three (3) years for all parts including the light source and
three (3) years for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3.
Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support.
You will need to provide your product's serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS
OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE
WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,
contact ViewSonic or your local ViewSonic dealer.
ViewSonic LCD Warranty (V2.0)
Release Date: 10-15-1999
ViewSonic
VE150m/VE150mb
15
Appendix
Safety Guidelines
Warning: This device must be operated with the original power supply, part number: HASU05F, SA3012V or ADP-40TB
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below:
USA................. UL
Canada............. CSA
Germany .......... VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and will look like (Figure A1
below):
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according
to the current rating for your unit. Please consult the table below for the selection criteria for power cords
used in the United States and Canada.
Cord Type
Size of Conductors in Cord
Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HARCertified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by
the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you
have purchased the product.
ViewSonic
VE150m/VE150mb
16
Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this device.
Notice for Japan
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the instruction manual.
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as amended
by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility," and 73/
23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety."
ViewSonic
VE150m/VE150mb
17
ViewSonic Corporation
Download PDF