Ericsson | T68 | User`s guide | Ericsson T68 User`s guide

Contents
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Getting started 3
Transferring and exchanging information 56
Make and receive the first call.
Bluetooth wireless technology, synchronization.
Getting to know your phone 6
More features 62
Key functions, quick keys, entering letters.
Calendar, alarm clock, stopwatch, timer, games.
Personalizing your phone 15
Security 69
Choose ring signal, theme and other settings.
SIM card lock, phone lock.
Calling 23
Troubleshooting 70
Use the phone book, voice control, call options.
Why doesn’t the phone work the way I want?
Setting up mobile Internet 41
Additional information 72
Set up WAP, e-mail and Bluetooth wireless technology.
Safe and efficient use, warranty, declaration of conformity.
Messaging 48
Icons 81
E-mail and text messages.
What do the icons mean?
Using mobile Internet 53
Index 85
WAP browser, bookmarks.
Ericsson T68m
First edition (October 2001)
This manual is published by Ericsson Mobile
Communications AB, without any warranty.
Improvements and changes to this manual
necessitated by typographical errors, inaccuracies
of current information, or improvements to
programs and/or equipment, may be made by
Ericsson Mobile Communications AB at any time
and without notice. Such changes will, however, be
incorporated into new editions of this manual.
Please contact your network operator or service
provider if you are in doubt whether you can use a
particular service or not.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
All rights reserved.
©Ericsson Mobile Communications AB, 2001
Publication number: EN/LZT 108 4788 R1A
INNOVATRON PATENTS
Please note:
Some of the services in this manual are not
supported by all networks. This also applies to the
GSM International Emergency Number 112.
Please read the Guidelines for safe and efficient
use and the Limited warranty chapters before you
use your mobile phone.
BLUETOOTH is a trademark owned by the
Bluetooth SIG, Inc.
T9™ Text Input is a registered trademark of Tegic
Communications.
T9™ Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928, and 6,011,554; Canadian
Pat. No. 1,331,057, United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro.Pat. No. 0 842 463(96927260.8) DE/
DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional
patents are pending worldwide.
Getting started
Assembly
Before you can use your phone you need to:
• insert the SIM card.
• attach and charge the battery. See “SIM card and
battery information” on page 4.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
About this user’s guide
For ease of reference, the “Getting to know your
phone” chapter gives a quick overview of the main
functions of the phone, shortcuts and general
information.
Note: Always turn off the phone and detach the
charger before you insert or remove a SIM card.
Available services
Some services and functions described in this user’s
guide are network- or subscription-dependent. Because
of this, all menus may not be available in your phone.
This symbol indicates that a service or
function is network- or subscriptiondependent.
Please consult your network operator for
more information about your subscription.
The SIM card
When you register as a subscriber with a network
operator, you get a SIM (Subscriber Identity Module)
card. The SIM card contains a computer chip that
keeps track of your phone number, the services
included in your subscription, and your phone book
information, among other things.
Getting started
3
SIM card and battery information
1.
2.
3.
4.
5.
6.
4
You have to insert the SIM
card and charge the battery
before you can use the phone.
B
A
e
s ns
U
l
tio
a
i
a
30 min.
rc nic
e
m mu
m
o om
C
4 h.
or ile C
f
t
No Mob
on
s
s
c
i
Er
It may take up to 30 minutes before an icon
appears in the display when charging.
Insert the SIM card. Make sure the SIM card is placed
under the silvery holders.
Place the battery on the back of the phone and push
until you hear a click.
Connect the charger to the phone at the flash symbol.
The flash symbol on the charger plug must face
upwards.
It may take up to 30 minutes before the battery
charging icon appears in the display.
Wait approximately 4 hours or until the icon indicates
that the battery is fully charged.
Remove the charger by tilting the plug upwards.
Getting started
Making and receiving calls
If you make a mistake while entering your PIN, delete
the wrong number by pressing
.
If you enter the wrong PIN three times in a row, the
SIM card is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key). Your PUK is provided by
your network operator.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
On/off
My Network
• Enter the area code and phone number, and press
to make the call.
• Press
to end the call.
12:18
• When the phone rings, press
to answer the call.
• Press and hold
until you hear a tone.
• Enter your PIN (Personal Identity Number), if you
have one for your SIM card, and press
.
Your PIN is provided by your network operator.
Getting started
5
Getting to know your phone
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Key functions
Volume Increase or decrease the
key
volume of the earpiece or
handsfree loudspeaker during
a call. Scroll through menus,
lists and text. Enter the Status
menu. Slide up or down once
to temporarily turn off the ring
signal. Slide up or down twice
to reject an incoming call.
Make and answer calls. Select
a menu, submenu or an option.
Press for options.
1–9, 0
Enter the digits 0–9 and
letters. Press and hold
to
enter the international prefix
+. Move through menus using
shortcuts.
Enter *. Shift between lower
and upper case.
6
Getting to know your phone
(clear)
Press the joystick up, down,
left or right to move through
the menus, lists and texts.
Press the joystick as an
alternative to
.
Press and hold to turn the
phone on or off or to go back
to standby mode. Press to end
or reject a call, go back one
level in the menus or leave an
option unchanged.
Delete numbers and letters
from the display. Delete an
item from a list. Press to mute
the ring signal. Press and hold
to turn off the microphone
during a call.
Enter #.
Quick keys
The table describes some of the most useful key
combinations.
To...
To...
When in standby:
reach a phone number
saved on the SIM card at
a specific position.
speed dial a phone number
saved on the SIM card
press the position number
and
find a contact in the
Call contact list
enter the first submenu of
the My shortcuts menu
see which profile you are
using
press and hold
see today’s date
slide the volume key up or
down
change the language to
Automatic
press
8888
change the language to
English
reject a call
press
0000
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
make an emergency call
When in standby:
enter the international
emergency number and
press YES
enter and move through
the main menus
enter the Call list
press
voice dial
press and hold YES or say
your magic word
call your Voice mail
press and hold
or
press YES
enter the + sign to make an press and hold
international phone call
set the phone to silent
press and hold
and
select Turn on silent, YES
reach a contact beginning press and hold any of the
with a specific letter
keys
-
press any of the number
keys
and YES
press and hold
slide the volume key up or
down
quickly slide the volume
key up or down twice
when receiving a call or
press NO
Getting to know your phone
7
To...
When in standby:
To...
When entering letters
using multitap text input:
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
enter a p (pause)
press and hold
saving codes
enter a p (pause)
press
melodies
To...
During a call:
put a call on hold
retrieve a call
turn off the microphone
press YES
press YES again
when
when editing
press and hold
To...
When in the menus:
move through menus or
lists
slide (and hold) the
volume key up or down or
use the joystick
press YES
select a menu or setting
enter a quick options menu press
delete an item
go back to standby
8
press
and YES when
in lists
press and hold NO
Getting to know your phone
reach the second letter or
character of a key
reach the third letter or
character of a key
shift between capital and
lower-case letters
enter numbers
enter a question mark
enter the @-sign
enter a space
slide the volume key up
and hold and press any of
the number keys
slide the volume key down
and hold and press any of
the number keys
press
, then the letter
press and hold any of the
number keys
slide the volume key down
and hold and press
slide the volume key down
and hold and press
press
delete letters and numbers press
shift between input
press and hold
methods
To...
When entering letters
using T9 Text Input:
want to go. To get back to standby, press and hold
.
You can quickly and easily reach the settings you
use most by placing them in the menu My shortcuts.
See “My shortcuts” on page 22.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
view alternative words
press
accept a word and add a
space
enter a full stop
press
view alternative
punctuation marks
press
, then
repeatedly
shift between capital and
lower-case letters
enter numbers
press
press
Help Texts
Some menus have help texts with explanations.
• To view help texts, highlight the menu item, press
, select Help, YES.
, then the letter
press and hold any of the
number keys
delete letters and numbers press
shift between input
press and hold
methods
Using shortcuts
A quicker way to move through the menus is to use
shortcuts. Enter the menus by pressing
or
and
then simply enter the number of the menu to which you
Delete, edit and rename
If you add items, for example, a contact, an
appointment or a WAP bookmark, it can be deleted,
edited or renamed.
There are two ways of deleting items:
• Select an item and press
.
• Select an item, press
, select Delete or Delete all.
There are two ways of editing items:
• Select an item, press
, select Edit.
• Scroll to the item you want to edit and press YES twice,
select Edit.
Getting to know your phone
9
Tip: You can rename an item in the same way.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Online services
Online services are customized services
offered by network operators, independently
of mobile phones and mobile phone
manufacturers.
A SIM card which supports Online services works
in the same way as a normal SIM card. When you have
inserted your SIM card and turned on your phone, your
network operator can download data to your SIM card.
After the first data download and after restarting your
phone, a new menu appears in your phone as the first
submenu under the Connect menu.
• To enter your new menu system, scroll to Connect/
Online services.
Note: This menu only appears if your SIM card
supports this service. Some operators may not use the
name “Online services”. Your phone may not support
all of the services offered.
10
Getting to know your phone
Menu overview
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Phone book
Call contact
Find and send *
Add contact
Edit contact
Business cards
Call from SIM
Groups
Calling cards
Options
Memory status
Special numbers
Messages
SMS
Call voice mail
E-mail
Options
Calls
Missed calls
Calling local
Call list
Call costs
Call timers
Data counters
Next call
Options
Fun & Games
Themes
Background
Games
My melodies
Pictures
WAP services
Homepage
Bookmarks
Push inbox
Enter address
Resume
Select profile
Clear cache
WAP settings
Organizer
Calendar
Voice memo
Alarms
Timer
Stopwatch
Calculator
Code memo
Connect
Online services
Infrared port
Bluetooth
Synchronization
Networks
Data comm.
Phone name
Accessories
My shortcuts
Select profile
Ring volume
Switch to line
My numbers
Edit shortcuts
Settings
Sounds & alerts
Profiles
Call options
Display
Language
Time and date
Locks
Voice control
Handsfree
Master reset
Ongoing call *
Transfer sound
Turn off tones
Hold call
Switch calls
Release active
Retrieve call
Join calls
Transfer call
Extract part
Release all
Release part
Parties in conf.
Calls
* Only available during a call
Please note that some menus
are network- and subscriptiondependent.
Getting to know your phone
11
Entering letters
You can enter letters, for example, when you add
names to the phone book, write text messages or enter
WAP addresses.
Apart from the way you normally enter letters in
your phone, using multitap text input, you can use
T9™ Text Input for entering text messages and email, for example, if the input language you select
supports this. T9 Text Input is a predictive input
method and is a quicker way to write texts. See “T9™
Text Input” on page 14.
The list of options
If you press
when writing, you enter a list of
options:
Add symbol – Symbols and punctuation marks such as
? and , are shown. Move between the symbols by using
the joystick.
Insert object – Such as pictures, melodies and sounds.
Text format – Change style, size and alignment.
Rel. caps lock/Caps lock – Switch between capital and
lower-case letters.
Input language – Input languages that you selected
earlier is shown.
Input method – A list of input methods is shown.
Edit word – for T9 Text Input only
Edit the suggested word by using multitap text input.
Accept word – for T9 Text Input only
Accept the suggested word.
Candidates – for T9 Text Input only
A list of alternative words is shown.
Help.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Input languages
Before you start entering letters, you need to select the
input languages that you want to use when writing.
•
•
•
•
•
•
•
•
To select input languages
1. Scroll to Settings, YES, Language, YES, Input, YES.
2. Scroll to the language that you want to use for entering
letters and press
.
3. Press YES to exit the menu.
When writing, you can switch to one of your selected
input languages by pressing
and then selecting
Input language. See “The list of options” on page 12.
12
Getting to know your phone
•
•
Multitap text input
When saving names in the phone book or when writing
WAP addresses, you enter letters using multitap text
input. You press each key as many times as needed to
show the letter you want.
In the following example, we are going to write
a name:
Press…
to get…
+&@/¤%$€£¥\§¿¡0Θ Ξ Ψ
Ω
#*↵¶
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To enter letters using multitap text input
1. Scroll to Phone book, YES, Add contact, YES.
Press YES again.
2. Press the appropriate key,
–
,
or
, repeatedly until the character you want appears
in the display.
See the table of the Latin alphabet below:
Press…
to get…
Space - ? ! ‚ . : ; " ’ < = > ( ) _ 1
ABCÅÄÆàÇ2Γ
DEFèÉ3∆Φ
GHIì4
JKL5Λ
MNOÑÖØò6
PQRSß7ΠΣ
TUVÜù8
WXYZ9
-
to delete letters and numbers
to shift between capital and lowercase letters
press and hold to enter numbers
Example:
• To enter an ‘A’, press
once.
• To enter a ‘B’, quickly press
twice.
• To shift between capital and lower-case letters, press
, then enter the letter.
Tip: You can also use the volume key as a shortcut to
certain letters:
To enter a ‘B’, slide the volume key up and hold and
press
.
To enter a ‘C’, slide the volume key down and hold and
press
.
Getting to know your phone
13
T9™ Text Input
You can use T9 Text Input when writing, for example,
text messages and e-mail. The T9 Text Input method
uses a built-in dictionary to recognize the most
commonly used word for each sequence of key
presses. This way, you press each key only once, even
if the letter you want is not the first letter on the key.
The following example shows how to start writing a
text message:
If you do not find the word you want by pressing
:
• press
to go to a list of options.
• Select Edit word, YES.
• Delete the entire word by pressing
, or delete
one letter at a time by pressing and holding the
joystick to the right, and then
repeatedly.
• Write the new word using multitap text input and
press YES.
The word is added to the dictionary. The next time
you enter
,
,
, the word you just
added to the dictionary will appear as one of the
alternative words.
4. Continue writing your message. See also “Sending text
messages” on page 48.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To enter letters using T9 Text Input
1. Scroll to Messages, YES, SMS, YES, Write new, YES.
2. For example, if you want to write the word “Ericsson”,
press
,
,
,
,
,
,
,
.
3. If the word shown is the one you want:
• press
to accept and add a space.
(To accept a word without adding a space,
press .)
If the word shown is not the one you want:
• press
repeatedly to view alternative words
(candidates). Accept a word and add a space by
pressing
.
14
Getting to know your phone
Tip: Press
to enter a full stop. To enter other
punctuation marks, press
and then
repeatedly. Accept by pressing
.
Press and hold
to select an input method.
Turning off the T9 Text Input
If you wish, you can turn off the T9 Text Input. This
setting is valid for all input of texts – not only for the
text you are currently writing.
• To turn T9 Text Input on or off, scroll to Settings/
Language/Predictive.
Personalizing your phone
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
You can adjust the phone settings to suit your own
requirements.
Note: If you change a setting which is included in a
profile, the active profile is also changed. See
“Profiles” on page 22.
Master reset
You can reset all the settings in the phone to the way
they were when you bought your phone by selecting
Reset settings. If you also want to delete all contacts,
messages and other personal data, select Reset all
instead.
To reset the phone
1. Scroll to Settings, YES, Master reset, YES.
2. Select Reset settings or Reset all, YES.
3. Enter the phone lock code (0000 or the new code if you
have changed it) and press YES.
Themes
You can change the appearance of the display, for
example, the colours, by using themes. Your phone
Personalizing your phone
15
comes with some pre-set themes. To select a theme,
select Themes from the Fun & Games menu.
3. You can now start to edit the picture. See the table
below.
4. Press YES, select Save, YES. The picture is saved in
My pictures.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Pictures
Your phone comes with a number of pictures. You can
• Have a picture as background when in standby mode.
• Enclose a picture in a text message.
When editing or drawing a picture:
Press…
The pictures are saved in Pictures or Background, in
the Fun & Games menu.
Handling pictures
You can add, edit or delete pictures in My pictures.
The number of pictures that can be saved depends on
the size of the pictures.
To view your pictures
• Scroll to Fun & Games, YES, Pictures, YES, select a
picture group, YES.
To edit and save a picture
1. Scroll to Fun & Games, YES, Pictures, YES, select a
picture group, YES.
2. Select a picture, YES.
16
Personalizing your phone
to…
move the cursor up and left.
move the cursor up.
move the cursor up and right.
move the cursor left.
lift up or put down the pen.
Press and hold to switch between zoom and
full size view.
move the cursor right.
move the cursor down and left.
move the cursor down.
move the cursor down and right.
switch line thickness.
view the Options menu.
Press…
to…
save and exit the picture.
To view your background pictures
1. Scroll to Fun & Games, YES, Background, YES,
Select picture, YES, select a picture and press YES
to get a full view.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
exit the picture editor.
press and hold to clear the picture.
move the cursor 1, 5 or 10 spaces.
switch between black and white pen colour.
The pictures can also be added to My favourites.
To add a picture to My favourites
1. Scroll to Fun & Games, YES, Pictures, YES, select a
picture group, YES.
2. Select a picture and press
.
3. Press YES to add the picture.
Background pictures
Your phone comes with a number of background
pictures but you can also download or receive pictures
sent by others.
To select a picture as background
1. Scroll to Fun & Games, YES, Background, YES,
Select picture, YES.
2. Select a picture and press YES twice.
Exchanging pictures
You can exchange pictures via text messages. For more
information on sending pictures in messages, see
“Messaging” on page 48. Background pictures can be
exchanged via IR, Bluetooth wireless technology or
WAP.
To send a picture
1. Scroll to Fun & Games, YES, Background, YES,
Send my picture, YES.
2. Select a transfer method.
If you use infrared make sure that the infrared ports are
facing each other.
Personalizing your phone
17
To receive and save a picture
1. From standby, press
and scroll to Receive, YES.
The infrared port is activated for 10 minutes and the
Bluetooth function is activated for three minutes.
2. Save picture? appears. Press YES to save the picture in
My picture under Fun & Games/Background/Select
picture.
2. Press
or
to increase or decrease the volume.
3. Press YES to save the setting.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
• When you receive a picture via a text message, a new
message appears in your Inbox. To save the picture in
My pictures under Fun & Games/Pictures, highlight
the picture, press
and select Save picture.
Ring signals and melodies
Your phone comes with a number of ring signals and
melodies. You can edit your ring signals and melodies,
and send them to a friend, in a text message. It is also
possible to download melodies via WAP, Bluetooth
wireless technology, IR.
• Select Voice calls from the Settings/Sounds & alerts/
Ring signals menu and select a ring signal.
To set the ring signal volume
1. Scroll to Settings, YES, Sounds & alerts, YES,
Ring volume, YES.
18
Personalizing your phone
To edit a ring signal or melody
1. Scroll to Fun & Games, YES, My melodies, YES.
2. Select one of the melodies, YES.
3. Select Edit, YES.
• Press
to remove notes.
• Press a key to enter a note.
• Press and hold a key to enter a
long note. The longer you press
a key the longer that note will
be. There are four different
lenghts of notes.
• Press
to change octave. There are three
different octaves.
• Press
once to raise the note one semitone.
• Press
twice to lower the note one semitone.
• Press
to enter a pause.
4. To listen to your melody, press YES.
5. Press YES again to save it, or press NO to continue
composing.
Note: To send a ring signal or melody in a text
message, see “To insert an object in a text message”
on page 48.
Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls. If your SIM subscription supports fax
and data calls, you can set different ring signals for
voice, fax and data calls respectively.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a Personal
ring signal to up to ten callers.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Receiving melodies
When you receive a sound or melody via IR, Bluetooth
wireless technology or WAP, the message “New
melody Save melody?” appears. Press YES to save it in
My melodies.
If you use infrared make sure that the infrared ports
are facing each other.
• To turn the ring signal on or off, press and hold
from standby and select Turn on silent or
Turn off silent.
All signals except the alarm and timer signals are
turned off.
Increasing ring
You can choose a ring signal that rises in steps
from the lowest volume to the highest.
• To turn increasing ring On or Off; scroll to
Settings/Sounds & alerts/Increasing ring.
To set a specific ring signal for a caller
1. Scroll to Settings, YES, Sounds & alerts, YES,
Ring signals, YES, Personal rings, YES, Add new?, YES.
2. Enter the first letter of the contact name, YES.
3. Select a contact, YES.
4. Select a ring signal, YES.
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
Personalizing your phone
19
To set the vibrating alert
1. Scroll to Settings, YES, Sounds & alerts, YES,
Vibrating alert, YES.
2. Select the setting you want, YES.
Display light
The display light can be set to automatic, off or on. In
automatic mode, the display light is turned off a few
seconds after you press the last key.
• To set the display light, scroll to Settings/Display/
Light.
• To set the display contrast, scroll to Settings/Display/
Contrast.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
From the Settings/Sounds & alerts menu, you can also
select Message alert, Key sound and turn on the
Minute minder.
If you turn on the minute minder, you hear a beep
once every minute during a call.
Menu language
Most SIM cards automatically set the menu language
to the language of the country where you bought your
SIM card. If this is not the case, the preset language is
English.
To change the menu language
1. Scroll to Settings, YES, Language, YES, Menus, YES.
2. Select a language, YES.
Note: You can always choose Automatic by pressing
8888
in standby.
You can always choose English by pressing
0000
in standby.
20
Personalizing your phone
Time settings
The time is always displayed in standby mode.
• To set the time, scroll to Settings/Time and date/Set time.
You can choose a 12-hour clock or a 24-hour clock.
• To set the time format, scroll to Settings/Time and
date/Time settings/Time format.
If you select the 12-hour clock, you can alternate
between am and pm by pressing
.
Date
When the phone is in standby mode, you can slide the
volume key up or down to see today’s date in the
Status menu.You can set the date and date format in the
Settings/Time and date menu.
Advanced time settings
Under Time settings in the Settings/Time and
date menu, you can set time zone and daylight
saving time. Changing these, changes the
time accordingly and thus also the appointments and
tasks in your calendar.
When your phone changes network, and the time
sent out from the operator deviates from the time in
your phone, you are asked whether you want to update
the time if you have turned on Automatic time zone. If
you press YES, the time is updated automatically.
To select a greeting
1. Scroll to Settings, YES, Display, YES, User greeting, YES.
2. Select a greeting, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Answering mode
When using a portable handsfree kit, you can choose to
answer a call by pressing any key (except the NO key)
or set the phone to answer the call automatically.
• To select answering mode, scroll to Settings/
Handsfree/Answering mode.
User greeting
When you turn your phone on or off, the Ericsson
greeting appears in the display. Your operator’s own
greeting may be shown instead.
If you want to interrupt the greeting, press NO.
Own greeting
You can create your own greetings by entering text.
• To create your own greeting, scroll to Settings/Display/
User greeting/Custom.
Phone number display
You can check your own phone number(s).
To check your phone number, scroll to Phone book/
Special numbers/My numbers. If your number is not
saved on your SIM card, you can enter it yourself.
Keypad lock
You can lock the keypad to avoid dialling a number by
accident.
Note: Calls to the international emergency number
112 can still be made, even when the keypad is locked.
Personalizing your phone
21
Automatic keylock
Automatic keylock means the keypad is locked
25 seconds after you last press a key.
• To turn automatic keylock On or Off, scroll to
Settings/Locks/Auto keylock.
• To lock the keypad manually, press and hold
select Turn on keylock.
Profiles
Your phone has a number of pre-set profiles which are
set to suit a certain environment. You can add
accessories to, rename or change these profiles. For
example, when you go to a meeting, you can simply
choose the Meeting profile and a number of settings
such as the ring signal is turned off.
• To select a profile, scroll to Settings/Profiles/
Select profile.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
and
The keypad remains locked until you answer an
incoming call or until you unlock the keypad manually.
• To unlock the keypad, press and hold
and select
Turn off keylock?.
My shortcuts
You can place your favourite functions that you want
to reach quickly and easily in the My shortcuts menu.
To add a function to my shortcuts
1. Scroll to My shortcuts, YES, Edit shortcuts, YES.
2. Select a function from the list by pressing
.
3. Enter the position number you want for this function in
your menu and press YES.
4. Press YES to exit the list.
22
Personalizing your phone
1.
2.
3.
•
To change a profile setting
Scroll to Settings, YES, Profiles, YES, Edit profile, YES.
Select a setting, YES.
Change the profile settings and press YES to confirm.
To rename a profile, scroll to Settings/Profiles/
Edit profile/Profile name.
You can reset all profile settings to the way they were
set when you bought your phone.
• To reset all profiles, scroll to Settings/Profiles/
Reset profiles.
Automatic activation
Some profiles, for example In car, are automatically
activated when used with a specific accessory. When
disconnected, the profile is changed back.
Calling
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Making and receiving calls” on page 5.
Making calls
1. Enter the area code and the phone number.
2. Press YES to make the call.
3. Press NO to end the call.
Tip: You can call numbers from the call list and the
phone book. See “Call list” on page 25 and “Phone
Book” on page 25. You can also use your voice to
make calls. See “Voice control” on page 29.
To change the earpiece volume during a call
• Slide the volume key on the side of the phone up or
down to increase or decrease the earpiece volume
during a call.
To turn off the microphone during a call
• Press and hold
until the display shows Muted.
Press
again to resume the conversation.
Calling
23
Automatic re-dialling
If the connection of the call failed and the display
shows Retry?, press YES. The phone re-dials the
number (up to ten times):
• until the call is connected.
• until you press a key or receive a call.
that these numbers can normally be used to make an
emergency call in any country, with or without a SIM
card inserted, if a GSM network is within range.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Note: Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a loud
signal.
Automatic re-dialling is not available for fax and
data calls.
Making international calls
1. Press and hold
until a + sign appears in the
display.
The + replaces the international prefix number of the
country from which you are calling.
2. Enter the country, area code (without the leading zero)
and phone number, YES.
Making emergency calls
• Enter 112 (the international emergency number), YES.
Your Ericsson phone supports the international
emergency numbers, 112, 911, 999 and 08. This means
24
Calling
Note: Some network operators may require that a SIM
card is inserted, and in some cases that the PIN has
been entered as well.
In some countries, other emergency numbers may also
be promoted. Your operator may therefore have saved
additional local emergency numbers on the SIM card.
• To view your local emergency numbers, scroll to
Phone book/Special numbers/SOS numbers.
Receiving calls
When you receive a call, the phone rings and the
display shows Answer?.
If your subscription includes the Calling Line
Identification service and the caller’s number is
identified, the number is displayed. If you have saved
the number in the phone book, the name is displayed.
To answer a call
• Press YES.
To reject a call
• Press NO.
Tip: You can also use your voice to answer or reject
calls. See “Voice control” on page 29.
• To turn the call list on or off, scroll to Calls, YES,
Options, YES, Call listing, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Phone Book
In the Phone Book you can save all the information
needed to contact people.
Missed calls
If you have missed a call, Missed calls:1 appears in
standby mode, indicating the number of missed calls.
To check your missed calls
1. Press YES to display the missed calls.
2. To call a number from the list, scroll to the number, YES.
Call list
The numbers of the last calls that you have made are
saved in the call list. If your subscription includes the
Calling Line Identification service and the caller’s
number is identified, you will also find the numbers of
answered and missed calls in the call list.
To call a number from the call list
1. To enter the call list, press YES from standby.
2. Scroll to the number you want to call, YES.
• To clear the Call list, scroll to Calls, YES, Options, YES,
Clear call list, YES.
1.
2.
3.
4.
5.
To add a contact
Scroll to Phone book, YES, Add contact, YES.
Scroll to the field you want to fill in, press YES.
Enter the information, YES.
Select the next field and so on.
When you have entered the information, scroll to
Save and exit?, YES.
To call a contact
1. From standby, press and hold one of the number keys
2-9 to find a contact beginning with the first letter on
that key (or closest following).
• For example, press and hold 5 to go to the first
contact beginning with “J”. To go to a contact
beginning with “K” press 5 twice after you have
entered the list of contacts.
2. When the contact you want to call is highlighted,
press YES.
Calling
25
3. Select the number you want to call, YES.
If only one number is linked to the contact, press
and hold YES at step 2.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Tip: You can also use the Call contact option in the
Phone book menu to call a contact.
Updating the phone book
When needed, you can easily update or delete any
contact information.
1.
2.
3.
4.
5.
6.
7.
8.
To edit a contact
Scroll to Phone book, YES, Edit contact, YES.
Enter the first letter of the contact, YES.
When the contact is highlighted, press YES.
Select Edit name or Edit numbers, YES.
Scroll to the field you want to fill in, YES.
Enter the information, YES.
Select the next field and so on.
When you have entered the information, scroll down to
Save and exit?, YES.
To delete a contact
1. Scroll to Phone book, YES, Edit contact.
26
2. Enter the first letter of the contact you want to delete,
YES.
3. Press
to delete the contact.
4. Press YES.
To delete all contacts, select Phone book, YES, Options,
YES, Delete all?, YES.
Calling
Note: Contacts that are saved on the SIM card are not
deleted.
Default (standard) number
Each contact has a default phone number. The first
phone number you link to a contact automatically
becomes the default number. If you scroll to a certain
contact in the Call contact list and then press and hold
YES, the default number is dialled.
To set the default number
1. Scroll to Phone book, YES, Edit contact, YES.
2. Enter the first letter of the contact, YES.
3. When the contact is highlighted, press YES.
Select Default number, YES. Select the number you
want as default, YES.
Groups
You can create a group of contacts. By doing so you
can send text messages to several recipients at the
same time. See “Sending text messages” on page 48.
To send your business card
8. Scroll to Phone book, YES, Business cards, YES,
Send my own, YES.
9. Select a transfer method, YES.
If you use infrared make sure that the infrared ports are
facing each other.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To create a group of contacts
1. Scroll to Phone book, YES, Groups, YES,
Add group, YES.
2. Enter a name for the group, YES.
3. Select Add member, YES.
4. Enter the first letters of the contact you want to add,
press YES.
5. Press YES to select the contact.
6. Select a phone number, press YES.
7. Repeat steps 3-5 to add more members.
Business cards
You can add your own business card to the phone book.
• To add your own business card, scroll to Phone book/
Business cards/My own. Then select Add my own.
Exchanging business cards
You can exchange business cards between your phone
and another similar phone, a PDA or a PC, using
Bluetooth wireless technology, the infrared port,
or an SMS.
When you receive a business card via a text message,
you accept the card by pressing YES. To be able to
receive a business card using the infrared port or
Bluetooth wireless technology, you need to select the
Receive menu in order to activate the infrared port or
to make the phone discoverable.
To receive a business card
1. From standby, press
and scroll to Receive, YES.
Both the infrared port and the Bluetooth function are
activated for three minutes.
2. When you receive the business card, press YES.
3. Press YES again to save the card in the phone book.
To send a contact
1. Scroll to Phone book, YES, Business cards, YES,
Send contact, YES,
Calling
27
2. Enter the first letters of the contact you want to send,
YES.
3. Press YES to select the contact.
Select transfer method, YES.
If you use infrared make sure that the infrared ports are
facing each other.
• To copy contacts to the phone, scroll to Phone book/
Options/Copy from SIM.
• To send all contacts, scroll to Phone book, YES,
Business cards, YES, Send all, and select a transfer
method.
To call any of these phone numbers from standby:
• Enter the position number and press YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Copy contacts
You can copy the contacts between your phone’s
memory and the SIM card. The number of contacts
that can be saved depends on the type of SIM card.
• To copy contacts to the SIM card, scroll to
Phone book/Options/Copy all to SIM.
Note: Everything on the SIM card is owerwritten.
If you insert a SIM card with saved contacts in your
phone, you can call a contact by selecting Call from
SIM in the Phone book menu. If you want to edit a
contact saved on the SIM card, you first need to copy
the contact to the phone.
28
Calling
Speed dialling
You can save the phone numbers that you want to
reach easily in positions 1-9 on your SIM card.
To change position numbers
1. Scroll to Phone book, YES, Options, YES, Position list,
YES.
2. Select the phone number you want to move, YES.
3. Select the position to which you want to move the
phone number, press YES.
4. When you have finished press NO .
When prompted, press YES to confirm your changes.
Checking the memory
With the Memory status function in your phone book,
you can check how many positions you have left in
your memory.
• To check the phone book memory, scroll to
Phone book/Memory status.
•
•
•
•
•
Voice control
With your phone, you can:
Voice dial – call someone by saying the name and
number type.
Answer and reject calls with your voice when using a
handsfree kit.
Change profile with your voice.
Record or listen to voice memos by using voice
commands.
Activate the voice control by saying a “magic word”.
phone book contacts, for example, “home” or
“mobile”.
Instructions appear. Press YES.
Select a number type, YES.
Lift the phone to your ear, wait for the tone and say the
command that you want to record. The voice command
is played back to you.
If the recording sounds OK, press YES to save the voice
command. If not, press NO and repeat step 4.
Repeat steps 4 and 5 for each voice command you need.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
You can save up to 50 voice commands. When
recording voice commands, make sure you are in a
quiet environment.
Before voice dialling
You must first turn on the name dialling function and
record your voice commands.
To turn name dialling on and record number types
1. Scroll to Settings, YES, Voice control, YES,
Voice settings, YES, Voice dialling, YES.
2. Select On, YES. Now you are going to record a voice
command for each number type you use with your
3.
4.
5.
6.
7.
You also need to record voice commands for each
contact name, for example, “John”.
To record a voice command for a contact name
1. Scroll to Settings, YES, Voice control, YES,
Voice commands, YES, Contacts, YES, Add voice, YES.
2. Select a contact, YES.
3. Follow the instructions in the display.
An icon appears next to a contact name which has a
voice command.
Calling
29
Caller name
You can choose whether you want to hear the recorded
contact name when you receive an incoming call from
that contact.
• To turn the caller name On or Off, scroll to
Settings/Voice control/ Voice settings/Caller name.
• Saying the magic word. See “The magic word” on
page 31.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Voice dialling
You can voice dial by saying the name of the contact.
To make a call
1. From standby, press and hold YES until you hear a tone.
2. Release YES, lift the phone to your ear and say a name,
for example “John”. The name is played back to you.
3. If you have several numbers for that contact, after a
second tone, say the number type, for example,
“home”.
The number type is played back to you, and the call is
connected.
From standby, you can also initiate voice dialling,
voice profiles and voice control of voice memos by:
• Sliding and holding the volume key.
• Pressing the handsfree button (when using a
portable handsfree or a Bluetooth headset).
30
Calling
Voice answering
You can answer or reject incoming calls by using your
voice, when using a portable handsfree or a car
handsfree kit.
To record voice answer commands
1. Scroll to Settings, YES, Voice control, YES,
Voice settings, YES, Voice answer, YES.
2. Select the accessories you want to be able to use with
voice answering by pressing
, YES.
3. Instructions appear. Press YES.
4. Lift the phone to your ear, wait for the tone and say
“Answer”, or another word. If the recording sounds
OK, press YES. If not, press NO and repeat step 5.
5. Say “Busy”, or another word. Press YES.
To answer a call using voice commands
• When the phone rings, say “Answer”.
The call is connected.
To reject a call using voice commands
• When the phone rings, say “Busy”.
The call is rejected. The caller hears a busy tone.
Changing profiles
If you record voice commands for your profiles, you
can change profile with your voice.
1.
2.
3.
4.
5.
To turn on and record recording commands
1. Scroll to Settings, YES, Voice control, YES,
Voice settings, YES, Voice memo, YES.
2. Select On, YES.
3. Instructions appear. Press YES.
4. Lift the phone to your ear, wait for the tone and say
“Record”, then press YES.
5. Say “Play”, press YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To turn on and record profile commands
Scroll to Settings, YES, Voice control, YES,
Voice settings, YES, Voice profiles, YES.
Select On, YES.
Instructions appear. Press YES.
Select a profile, YES.
Lift the phone to your ear, wait for the tone and say the
profile name. Repeat steps 4 and 5 to record voice
commands for the other profiles.
To change a profile using voice commands
1. From standby, press and hold YES until you hear a tone.
2. Release YES, lift the phone to your ear and say the
profile command for the required profile. The profile
command is played back to you and the current profile
is changed.
Voice recordings
Instead of using the menus, you can record voice
commands to start or to listen to a recording.
To start a recording using a voice command
1. From standby, press and hold YES until you hear a tone.
2. Release YES, lift the phone to your ear and say
“Record”. The voice command is played back to you
and a tone indicates that the recording has begun.
3. To end the recording, press YES.
To listen to recordings using a voice command
1. From standby, press and hold YES until you hear a tone.
2. Release YES, lift the phone to your ear and say “Play”.
The voice command is played back to you.
3. Listen to your recordings. Press NO to stop.
The magic word
You can record a magic word and use it as a voice
command to allow totally handsfree access to voice
Calling
31
control. Instead of pressing and holding YES, you say
the magic word and then one of your recorded voice
commands. The magic word is especially suitable
when using a car handsfree kit.
To re-record a voice command
1. Scroll to Settings, YES, Voice control, YES,
Voice commands, YES.
2. Select the type of voice command, YES.
3. Select a voice command, YES.
4. Select Replace voice, YES.
5. Lift the phone to your ear, wait for the tone and say the
command.
You can also edit the voice command for a contact
name in Edit contact in the Phone book menu.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Tip: Choose a long, unusual word which can easily
be distinguished from ordinary background speech.
To turn on and record the magic word
1. Scroll to Settings, YES, Voice control, YES,
Voice settings, YES, Magic word, YES.
2. Select the accessories you want to be able to use with
the magic word by pressing
, YES.
3. Instructions appear. Press YES.
4. Lift the phone to your ear, wait for the tone and say the
magic word.
32
•
•
Tip: Turn off the magic word when you no longer
need totally handsfree access, in order to save battery
power.
•
Editing your voice commands
You can keep all your voice commands up to date by
re-recording them or deleting the ones you do not use.
See the following example.
•
Calling
•
Tips when recording
If your phone cannot detect speech, one of the
following might have happened:
You spoke too softly – try speaking more loudly.
You held the phone too far away – hold it as you do
during a call.
The voice command was too short – it should be
around one second long and more than one syllable.
You spoke too late or too soon – speak immediately
after the tone.
You did not record the voice command when the
handsfree was attached – for voice control with a
handsfree kit, record when the handsfree is attached.
• You used another intonation – use the same intonation
as you did when recording the voice command.
Call time and cost
During a call, the duration of the call is shown
in the display. If you subscribe to cost
information, the call cost (or the number of
call units) is displayed.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Voice mail
If your subscription includes an answering
service, callers can leave a voice mail
message when you cannot answer a call.
Receiving a voice mail message
Depending on your network operator, you are
informed that someone has left a message by a text
message (SMS) or by a voice mail indication. Press
YES to listen to the message.
Calling your voice mail service
You can easily call your voice mail service by pressing
and holding
, if you have saved your voice mail
number in the phone. You get the number from your
service provider.
• To enter the number, scroll to Messages/Options/
Voice mail no.
You can check the duration of your last call, outgoing
calls and the total time.
• To check the call time, scroll to Calls/Call timers/ and
select an option. To reset the call time meter, select
Reset timers.
You can check the cost of your last call and the total
cost of your calls.
• To check the call cost, scroll to Calls/Call costs/ and
select an option. To reset the call cost meter, select
Clear total cost.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Tariff function to specify the price per
call unit. If you do not specify a price per call unit, the
number of call units is displayed.
Calling
33
To enter the price per call unit
Scroll to Calls, YES, Call costs, YES, Set tariff, YES.
Enter your PIN2, YES.
Select Change tariff, YES.
Enter the code for the currency you want, (for example
GBP for Pounds Sterling), YES.
5. Enter the price per call unit, YES.
To enter a decimal point, press
.
1.
2.
3.
4.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Credit limit for calls
You can enter a total amount of money that
can be used for making calls. When the
amount reaches zero, no more calls can be
made. Please note that the credit limit is only an
estimated value.
1.
2.
3.
4.
34
Diverting calls
If you cannot answer incoming voice, fax or
data calls, you can divert them to another
number, for example your answering service.
For voice calls, you can choose between the
following divert alternatives:
• Divert always – divert all voice calls.
• When busy – divert calls if you are already on the
phone.
• Not reachable – divert calls if your phone is turned
off or if you are unreachable.
• No reply – divert calls that you do not answer within
a specified time limit (operator-dependent).
To set a credit limit
Scroll to Calls, YES, Call costs, YES, Set credit, YES.
Enter your PIN2, YES.
Select Change credit, YES.
Enter an amount, YES.
Calling
Note: When the Restrict calls function is on, some
Divert calls options cannot be activated.
To turn on a call divert
1. Scroll to Settings, YES, Call options, YES, Divert calls,
YES.
2. Select a call category and then a divert alternative, YES.
3. Select Activate, YES.
4. Enter the phone number to which you want your calls
to be diverted and press YES, or retrieve it from the
phone book.
To turn off a call divert, select a divert option and
select Cancel.
• To activate or deactivate the call waiting service, scroll
to Settings/Call options/Call waiting.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To check status
• Scroll to Settings, YES, Call options, YES, Divert calls,
YES. Select a call type, YES. Scroll to the divert you
want to check, YES. Select Get status, YES.
• To check the status of all call diverts, select Check all
in the Divert calls menu.
More than one call
You can handle more than one call
simultaneously. For example, you can put an
ongoing call on hold, while you make or
answer a second call, and then switch between the two
calls.
Note: During a call the Ongoing call menu replaces
the Calls menu.
Call waiting service
If the call waiting service is activated, you hear a beep
in the earpiece if you receive a second call during an
ongoing call.
To make a second call
1. Press YES to put the ongoing call on hold.
2. Enter the number you want to call and press YES, or
retrieve a number from the phone book.
Note: You can only put one call on hold.
Receiving a second call
• To answer the second call and put the ongoing call on
hold, press YES.
• To reject the second call and continue the ongoing call,
select Busy.
• Select Release&answer to answer the second call and
to end the ongoing call.
Handling two calls
When you have one ongoing call and one call on hold,
you can do the following:
• Press YES to switch between the two calls.
• Scroll to Ongoing call, then select Join calls to join the
two calls into a conference call.
Calling
35
• Scroll to Ongoing call, then select Transfer call, to
connect the two calls. You are disconnected from both
calls.
• Press NO to end the ongoing call, then press YES to
retrieve the held call.
• Press NO twice to end both calls.
2. Call the next person you wish to include in the
conference call.
1. Scroll to Ongoing call, select Join calls, YES.
Repeat steps 1 to 3 to include more participants.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Note: You cannot answer a third call without ending
one of the first two calls.
Conference calls
In a conference call, you can have a joint
conversation with up to four other people.
You can also put a conference on hold and
make another call.
Creating a conference call
To create a conference call, you must first have one
ongoing call and one call on hold.
To join the two calls into a conference call
• Scroll to Ongoing call, YES, Join calls, YES.
To add a new participant
1. Press YES to put the conference call on hold.
36
Calling
To release a participant
1. Scroll to Ongoing call, select Release part, YES.
2. Select the participant, YES.
To end the conference call
• Press NO.
Having a private conversation
You can have a private conversation with one of the
participants and put the other participants on hold.
• Scroll to Ongoing call, then select Extract part to
select the participant that you want to talk with.
• Select Join calls to resume the conference call, again.
Two voice lines
Your phone may have two voice lines with
different phone numbers. This may be useful
if, for example, you want to keep business
calls and private calls on separate lines.
• To select a line, scroll to Calls/Next call.
All outgoing calls are made on this line until you
change it. Incoming calls can still be received on
either line.
You can change the names of the lines, and have
different settings for each line, for example, different
ring signals.
• To change the name of a line, scroll to Settings/
Display/Edit line tag.
To turn the calling card service on or off
1. Scroll to Phone book, YES, Options, YES,
Set callingcards, YES.
2. Enter your Phone Lock code, YES.
3. Select On or Off, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Calling card calls
You can use the calling card service to
redirect the cost of a call to a credit card or a
calling card account, instead of your normal
account. This may be useful, for example, when
making long distance calls.
You can save two separate calling card numbers.
The numbers and the codes associated with them are
protected by the phone lock code.
Before making a calling card call, you need to select
and activate a card.
Note: You cannot use the calling card service for fax
and data calls.
To save a card number
1. Scroll to Phone book, YES, Calling cards, YES.
2. Enter your phone lock code, YES.
3. Select Add new?, YES.
Enter the card settings (the access number and name of
the calling card server, and the verification code). You
get this information from your card provider. Select
which you want to send first – the number that you
want to call, or the verification code. Press YES to
confirm your choice.
1.
2.
3.
4.
To select a card
Scroll to Phone book, YES, Calling cards, YES.
Enter your phone lock code, YES.
Select a card, YES.
Select Activate card, YES.
Calling
37
To make a calling card call
1. Enter the phone number of the person you want to call,
or retrieve the number from the phone book.
2. Press and hold YES.
The access number of the calling card server is called.
During the connecting phase, you are asked to send the
phone number you want to call and the verification
code.
3. Press YES when the display shows Send called
number?, or wait a few seconds and the number and
code are sent automatically.
• All outgoing international calls except to your home
country – Outg. intl roam.
• All incoming calls – All incoming.
• All incoming calls when you are abroad (when
roaming) – Inc when roam.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Restricted dialling
You can use the restrict calls service to restrict
outgoing and incoming calls. This may be
useful, for example, when you are abroad. To
use this service, you need a password which you get
from your service provider.
Note: If you divert incoming calls, you cannot activate
some Restrict calls options.
The following calls can be restricted:
• All outgoing calls – All outgoing.
• All outgoing international calls – Outgoing intl.
38
Calling
To turn a call restriction on or off
1. Scroll to Settings, YES, Call options, YES,
Restrict calls, YES.
2. Select an option, YES.
3. Select Activate or Cancel, YES.
4. Enter your password, YES.
• To turn off all call restrictions, select Cancel all.
• To change the password, select Change passwd.
Fixed dialling
The fixed dialling function allows calls to be
made only to certain numbers saved on the
SIM card. Fixed dialling requires a SIM card
that allows fixed numbers to be saved. The fixed
numbers are protected by your PIN2.
Note: Calls to the international emergency number
112 can still be made, even when the fixed dialling
function is on.
• Partial numbers can be saved. For example, saving
0123456 allows calls to be made to all numbers
starting with 0123456.
• Numbers with question marks can be saved. For
example, saving 01234567?0, allows calls to be made
to numbers from 0123456700 to 0123456790. To enter
a question mark, press and hold
.
To add a group
1. Scroll to Settings, YES, Call options, YES,
Closed groups, YES, Edit list, YES.
2. Scroll to Add new?, YES.
3. Enter the name of the user group, YES.
4. Enter the index number, YES.
You get the index number from your operator.
To turn fixed dialling on or off
1. Scroll to Phone book, YES, Options, YES,
Fixed dialling, YES.
2. Enter your PIN2, YES.
3. Select On or Off, YES.
To activate a group
1. Scroll to Settings, YES, Call options, YES,
Closed groups, YES, Edit list, YES.
2. Select a group, YES.
3. Select Activate,YES.
Calls can only be made within the selected group.
• To save a fixed number, scroll to Phone book/Special
numbers/Fixed numbers/select Add new? and enter the
number.
• To call outside a Closed User Group, select Open calls
and then select On.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Closed user groups
The Closed User Group function is a way of lowering
call costs. On some networks it is cheaper to make
calls within a call group. You can save ten groups.
Accept calls
With the accept calls service, you can choose to
receive calls only from certain numbers. Other calls
are automatically rejected by a busy tone. The phone
numbers of calls you have rejected are saved in the
Call List.
Calling
39
To add numbers to the accepted callers list
1. Scroll to Settings, YES, Call options, YES, Accept calls,
YES, Accepted list, YES.
2. Scroll to Add to list?, YES.
This takes you to the phone book.
3. Select an entry, YES.
Additional calling functions
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
• To select an accept option, scroll to Settings/
Call options/Accept calls/Accept options.
Networks
When you turn on the phone, it automatically
selects your home network if this is within
range. If it is not within range, you may use
another network, provided your network operator has
an agreement that allows you to do so. This is called
roaming.
You can select the network you want to use, or you
can add a network to your list of preferred networks.
You can also change the order in which networks are
selected during an automatic search. For all such
options, scroll to Connect, YES, Networks, YES.
40
Calling
Tone signals
You can use telephone banking services or
control an answering machine by sending
tone signals (also known as DTMF tones or
touch tones) during a call.
• To send the tones, press the number keys 0-9,
and
.
• To clear the display after the call is finished, press NO .
Notepad
You can use the phone to make a note of a phone
number during a call. When you press the number
keys, the person you are talking to hears tone signals.
To turn these tone signals off during the call, press
, select Turn off tones, YES. When you end the
call, the number remains in the display. You can then
call the number by pressing YES.
Showing or hiding your number
If your subscription supports the Calling Line
Identification Restriction (CLIR) service, you
can hide your phone number when making a
call.
To show or hide your phone number
1. Enter the phone number you want to call.
2. Scroll to Calls, YES, Next call, YES.
3. Select Hide my number or Show my numb. and press
YES to make the call.
Setting up mobile Internet
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
In order to use the Internet, browse via WAP
services or send and receive e-mail messages,
you must have a phone subscription that
supports data transmission and settings
entered.
Note: Settings may already be entered when you buy
your phone, or you can receive settings from your
network operator or service provider. Settings are also
available at www.ericsson.com/consumers.
Receiving settings in a text message
Your GSM network operator or Internet service
provider may be able to send the required data account,
WAP and e-mail settings direct to your phone in a text
message (SMS).
To request settings from Ericsson
1. Use a PC to go www.ericsson.com/consumers. By
using the WAP and E-mail Configurator you can
request that a text message be sent to your phone with
the settings you need.
Setting up mobile Internet
41
2. When the message arrives, New settings. Install?
appears.
• Press YES to install the new settings or
Note: If settings already exist in your phone you can
either keep or replace them. See “Advanced setting
information” on page 42 for more information.
• Press NO to cancel installation. A new request for
settings is then required, as in step 1.
3. After installation, see “Using mobile Internet” on
page 53.
Note: Please contact your network operator for
charging details.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Advanced setting information
Mobile Internet, including WAP and e-mail, requires
the following settings:
• Data account – settings for access to a server for
WAP browsing and e-mail messaging.
• WAP profile – settings for WAP browsing.
• E-mail account – settings for e-mail messaging.
Data account settings
You can have several data accounts saved in
your phone, with different settings for
different purposes. The main setting for a data
account is the Account type (connection method).
42
Setting up mobile Internet
You can choose from GPRS data or GSM data account
types.
GPRS (General Packet Radio Service) allows
fast and efficient access where you can
always be online.
Note: You need a subscription that supports GPRS.
GPRS settings that are available:
• APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
• User id – your user id to log on to the external data
network.
• Password – your password to log on to the external
data network.
• Passwd request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you with
a temporary IP address.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
To create a data account manually
1. Scroll to Connect, YES, Data comm., YES,
Data accounts, YES, Add account?, YES.
2. Select an access type.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing YES.
5. Scroll to Save?, YES.
GSM settings include some settings that are
similar to GPRS settings and some which are
GSM specific as follows:
• Phone number – the phone number of your
Internet service provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analogue or ISDN connection.
To edit a data account
1. Scroll to Connect, YES, Data comm., YES,
Data accounts, YES.
2. Select a data account, YES.
3. Select Edit.
4. Select the setting you want to edit, YES. Edit the
setting, YES.
5. Repeat step 4 for other settings you want to edit.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
Preferred service
You can set GPRS or GSM as the preferred service.
This setting is valid for all data accounts.
• To select preferred mode, scroll to Connect/Data
comm./Pref. service and select GPRS and GSM or
GSM only.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Setting up mobile Internet
43
Note: To see the status of GPRS coverage and
connection, slide the volume key up or down from
standby to enter the Status menu and then scroll to
GPRS.
2. Scroll to WAP services, YES, WAP settings, YES.
3. Select the profile that you want to edit and press YES.
4. Scroll to Rename, YES. Enter a name for the profile.
5. Scroll to Chg homepage, YES. Enter the address of the
WAP page you want to have as homepage.
6. Scroll to Save to, YES. Select if the bookmarks that you
add during browsing should be available for all your
WAP profiles or only for the WAP profile you are
currently using and press YES.
7. Scroll to Gateway, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Sent and received data
You can check how much data you have sent and
received, using GPRS.
• Scroll to Calls/Data counters, and select Last session
or Total data.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
“Data account settings” on page 42.
44
Setting up mobile Internet
For GPRS and GSM, select IP settings, YES. Continue
as described in “To enter IP settings” below.
For SMS, scroll to Change type/SMS/SMS settings.
Continue as described in “To enter SMS settings”
below.
To enter IP settings
1. Select Connect using, YES. Select the data account you
want to use when browsing, YES.
2. Scroll to IP address, YES. Enter the IP address of the
WAP gateway, YES.
3. Scroll to User id, YES. Enter your user id for the WAP
gateway.
4. Scroll to Password, YES. Enter your password for the
WAP gateway, YES.
5. Scroll to Data mode, YES. Select a data connection
mode, YES.
6. Scroll to Security, YES. Select On if you want a secure
connection, or Off if you do not want a secure
connection.
7. Scroll to Show images, YES. Select On if you want to
view images while browsing, or Off if you do not want
to view images while browsing.
8. Scroll to Response timer, YES. Enter a time limit in
seconds after which a download attempt will stop.
3. Scroll to User id, YES. Enter your user id for the WAP
gateway.
4. Scroll to Password, YES. Enter your password for the
WAP gateway.
5. Scroll to Security, YES. Select On if you want a secure
connection, or Off if you do not want a secure
connection.
6. Scroll to Show images, YES. Select On if you want to
view images while browsing, or Off if you do not want
to view images while browsing.
7. Scroll to Response timer, YES. Enter a time limit in
seconds after which a download attempt will stop.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Note: An IP address consists of four groups of digits,
with a maximum of three in each group. If one of your
digit groups consists of only one or two digits, you
have to enter a leading zero (0) for each digit that is
missing. Example: If the IP address is 123.4.67.901,
write 123.004.067.901.
To enter SMS settings
1. Select Service centre, YES. Enter the phone number of
your network operator’s service centre.
2. Scroll to SMS gateway, YES. Enter the phone number
of your network operator’s SMS gateway.
WAP security settings
To establish secure connections when using certain
WAP services, you need to have certificates saved in
your phone. Your phone may already contain
certificates when you buy it. You can also download
certificates from certain WAP sites, or receive them
from a service provider.
To turn on a secure connection
1. Scroll to WAP services, YES, WAP settings.
2. Select the profile you want to edit, YES.
Setting up mobile Internet
45
3. Select Gateway, YES, IP settings or SMS settings, YES,
Security, YES, On, YES.
details about the transaction, can be saved in your
phone.
• To check your contracts, scroll to WAP services/WAP
settings/Common/Security/Contracts.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To check the certificates in your phone
1. Scroll to WAP services, YES, WAP settings, YES,
Common, YES, Security, YES.
2. Select Trusted certif. or Client certif.
Locks (PIN codes)
PIN codes protect your subscription from
unauthorized use, when accessing certain WAP sites,
and to authorize transactions. Your PIN code acts as a
signature when you confirm a transaction.
Note: These codes are supplied by your
network operator or service provider if
supported.
A Locks setting may appear in the Security
submenu:
• To go to the Locks menu, scroll to WAP services/WAP
settings/Common/Security/Locks.
Transaction contracts
You can check which transactions you have made with
your phone when browsing. A contract, which contains
46
Setting up mobile Internet
E-mail account settings
An e-mail account specifies, for example, the server
that is used for your e-mail messages.
To create an e-mail account
1. Scroll to Messages, YES, Options, YES, E-mail, YES.
2. Select Edit account, YES.
3. Select Add new?, YES.
4. Enter a name for the account, for example Home or
Office.
5. Select Connect using, YES.
A list appears with the data accounts that you have
saved in your phone.
6. Select the data account you want to use with this email account, YES.
7. Enter the rest of the settings in the list. You use the
same e-mail settings in your phone as in your PC email program. If you do not have an e-mail service,
contact your operator to get all the necessary settings.
• POP3 server – enter the name or IP address of the
service provider. For example, mail.server.com or
10.1.1.1.
• POP3 port – if needed, change the number of the port
used by the POP3 protocol.
• Mailbox – enter a user name for your e-mail account.
• Password – enter a password for your e-mail account.
• SMTP server – enter the name or IP address of the
SMTP server to be able to send e-mail messages.
• SMTP port – if needed, change the number of the port
used by the SMTP protocol.
• Email address – enter your e-mail address.
• From name: – enter your name.
• Signature – select if you want to add your business
card to your e-mail messages.
• Copy outgoing – Select On, if you want e-mail
messages sent from your phone also to be sent to an email address of your choice. This way, your sent
messages are copied and can be saved for future
reference.
• Check interval – Select how often you want the phone
to connect to your e-mail server and check for
incoming e-mail messages. This is convenient if you
have got a GPRS subscription.
If you have both an office and a home e-mail account,
you can set one of them as default:
• Select Set account from the Messages/Options/E-mail
menu and select the account.
See “E-mail” on page 51 for information about how to
use e-mail.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Setting up mobile Internet
47
Messaging
3. Enter the number, including the international “+” sign
and country code, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Your phone supports messaging services text messages and e-mail. Please contact your
service provider for details on which services
you can use.
Text messages
Text messages can be sent to one person, or to a group
of recipients that you have saved in the phone book.
Text messages can also contain pictures, animations,
melodies and sounds.
Before you start
• First make sure that the number of your service centre
is set. The number is supplied by your service provider
and is usually saved on the SIM card.
To set the service centre number
1. Scroll to Messages, YES, Options, YES, SMS, YES,
Service centres, YES.
If the service centre number is saved on the SIM card it
appears in the display.
2. If there is no number in the list, select Add new?, YES.
48
Messaging
Sending text messages
For information about entering letters, see “Entering
letters” on page 12.
To write and send a text message
1. Scroll to Messages, YES, SMS, YES, Write new, YES.
2. Write your message, YES.
3. Enter the recipient’s phone number or press
to
retrieve a number or a group from the phone book.
4. Press YES to send the message.
Note: If you send a text message to a group, you are
charged for each member of that group.
1.
2.
3.
4.
5.
To insert an object in a text message
Scroll to Messages, YES, SMS, YES, Write new, YES.
While writing your message press
.
Select Insert object, YES.
Select Picture, Sound, Melody or Animation, YES.
Select an object, YES.
Text formatting
You can change the style, size and alignment of the
text, and create new paragraphs, in a text message.
1.
2.
3.
4.
When you have read the text message, press YES to
select one of the following options, for example,
Reply, Forward or Delete the text message. Press NO to
close the text message.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To format the text in a text message
Scroll to Messages, YES, SMS, YES, Write new, YES.
Before you write the text message, press
.
Select Text format, YES. Then select Text size,
Text style, Alignment or New paragr., YES.
Select one of the alternatives, YES.
To select or deselect a Text style press
, YES.
Receiving text messages
When you receive a text message, the phone beeps and
the message New message Read now? appears in the
display.
To read the text message
Press YES to read the text messsage, or NO if you want
to read the message later. The message is saved in
Inbox in the SMS menu. You may not receive all parts
of a long message at the same time.
While reading the text message you can, for example,
go to a WAP address found in the text message.
Saving incoming text messages
Incoming text messages are saved in the phone
memory. When the phone memory is full, incoming
text messages are saved on the SIM card. Messages
that you have saved on the SIM card remain there until
you delete them.
To save from a text message
When the phone number, picture or melody is
highlighted, press YES. Then select to save the item and
press YES.
• A picture is saved in Pictures.
• A melody is saved in My melodies.
• A phone number is saved in Phone book.
Long messages
A text message can contain up to 160 characters.
You can send a longer message by linking two or more
messages. Please note that you are charged for the
number of linked messages.
Messaging
49
• To turn long messages on or off, select Long messages
from the Messages/Options/SMS menu.
• Validity Period – If your message cannot be delivered,
for example, if the recipient has turned off the phone,
your service centre can save the message to send it
later.
• Request reply – Include a reply request if you want the
recipient of your message to reply.
• Status request – Check if a message has been
delivered.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Templates
If you have one or more messages that you send often,
you can save these as templates. Your service provider
may also have saved some templates in your phone.
To create a template
1. Scroll to Messages, YES, SMS, YES, Templates, YES,
Add new?, YES.
2. Write the message, YES.
3. Press YES if you want to send the message now.
Press NO to save the template.
Message options
You can set a default value for the message options
below, or you can turn on the Set on send option which
means that you choose the settings each time you send
a message.
• Message type – The phone supports different types of
messages. Your service provider may offer the facility
of converting a text message into a format (e-mail or
fax, for example) that suits the equipment that is going
to receive the message.
50
Messaging
To set a default message option
1. Scroll to Messages, YES, Options, YES, SMS, YES.
2. Select a message option, YES.
3. Select an option, YES.
To turn set on send on or off
• Repeat steps 1 and 2 above, then select Set on send,
YES.
To check the status of a sent message
1. Scroll to Messages, YES, SMS, YES, Sent items, YES,
select a text message, YES.
2. Scroll to Proceed?, YES. Select View status, YES.
Area information
Area information is a type of text message that is sent
to all subscribers in a certain network area, for
example, a local traffic report. When you receive an
area information message, the message automatically
appears in the display. You cannot save area messages.
Please consult your service provider for more
information about area information codes.
• To turn area information on or off, scroll to Messages/
Options/SMS/Area info/Reception.
• To enter an area information code, scroll to Messages/
Options/SMS/Area info/Edit list/Add new?.
Before you start
First make sure that you have:
• Set up a data account. See “Data account settings” on
page 42.
• Set up and select an e-mail account. See “E-mail
account settings” on page 46.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Cell information
The cell information channel is used by some network
operators to send messages to their subscribers within
a certain network area.
• To turn on the channel, scroll to Messages/Options/
SMS/Cell information.
E-mail
You can use your phone to send and receive e-mail
messages. Please note that you need a subscription that
supports data transmission. For more information,
consult your service provider.
Sending and receiving e-mail messages
The Send & receive option offers the fastest way to
send e-mail messages saved in the Outbox and check
for new e-mail messages.
To write and send an e-mail message
1. Scroll to Messages, YES, E-mail, YES, Compose, YES.
2. Select:
• To: – then add name, enter an e-mail address, or
retrieve an e-mail address from the phone book.
You can also retrieve a saved address from received
messages in your inbox.
• Cc: – If you want to send a copy of the message to
someone.
• Priority: – Set the message priority.
• Subject: – Write a title, YES.
• Text: – Write your message, YES.
3. Select one of the following:
Messaging
51
• Send now – The e-mail message is sent.
• Send now with attachment – You can attach a
picture from a digital camera connected via IR.
Select a picture and press YES to send.
• Save to outbox – The e-mail message is saved in the
Outbox.
• Save to drafts? – The e-mail message is saved in
Drafts.
1.
2.
3.
4.
5.
To reply to an e-mail message
Open the e-mail message.
Place the cursor in the text and press
.
Select Reply or Reply all, YES.
Select Write new or Include this msg, press YES.
Write a message, YES.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Messages that you write but do not send or save in the
Outbox are automatically saved in the Drafts folder.
To receive and read e-mail messages
1. Scroll to Messages, YES, E-mail, YES, Send & receive,
YES.
2. When the e-mail messages have been downloaded to
the phone, go to the Inbox in the E-mail menu, to read
them.
Note: The phone can save up to six complete e-mail
messages. All e-mail messages are also saved on your
e-mail server.
An arrow in the top or bottom left corner indicates that
there are more messages on the server. To retrieve
more messages, scroll to the arrow and press YES.
52
Messaging
To save an e-mail address or a phone number
1. When the e-mail address or phone number is
highlighted, press YES.
2. Select Save, YES.
Archiving
You can archive an e-mail message in order to read it
later, or if you want to save important information. You
can archive only as much text as the display shows.
To archive an e-mail message
1. Open the e-mail message.
2. Make sure that the text you want to archive is visible in
the display.
3. Place the cursor in the text and press
.
4. Select Copy to arch., YES. The text can be found in
Archive under the E-mail menu.
Using mobile Internet
Using the WAP browser
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Your phone has a WAP (Wireless Application
Protocol) browser and e-mail messaging
which are designed to bring a modified Internet to your
mobile phone. A wide range of services are available,
for example, news, entertainment, timetables,
reservations, banking, e-commerce, positioning and
e-mail.
Before you start
First make sure that you have:
• A phone subscription that supports data transmission.
• Correct settings in your phone for mobile Internet,
WAP and/or e-mail messaging. See “Setting up mobile
Internet” on page 41.
Note: See “E-mail account settings” on page 46 or
“E-mail” on page 51 for more information about email set-up and messaging.
To start browsing
1. First select the WAP profile you want to use. Scroll to
WAP services, YES, Select profile, YES.
2. Press NO to go back to WAP services.
3. Then select one of the following:
• Open your homepage (Ericsson Mobile Internet is
default).
• Go to one of your bookmarks. Select Bookmarks, YES.
• Enter the address of a WAP site. Select Enter address,
YES , New address? to enter a new WAP address or
select one of the 10 latest entered addresses.
Tip: When you enter a WAP address, the normal
http:// prefix is not needed. You do however need to
enter a prefix to use protocol, such as https://.
To exit WAP
• Press and hold NO. Remain connected? appears.
Press NO.
• If you want to leave the browser temporarily but stay
on-line, press
and select Go to menu.
Using mobile Internet
53
•
•
•
•
•
•
Options when browsing
When you have started browsing, you can reach
different browsing options by pressing
.
The options menu is dynamic. Its content may vary
depending on which WAP site you are visiting.
The options menu always contains the following:
Go to the homepage set for the current WAP profile.
Bookmarks – Add the site you are currently browsing
to your list of bookmarks, or see the list of bookmarks
for the current profile.
Enter address – Enter the WAP address of a site you
want to visit.
Send SMS – Send a text message with a link to the
current WAP page to another phone.
Reload – Refresh the contents of the WAP page.
Go to menu – go back to the WAP services menu in
order to access other phone menus. The connection to
the Internet is not interrupted. When you want to start
browsing again, scroll to WAP services, YES, Resume,
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
YES
• Exit – Close down the WAP connection.
• Status – Display the current status, for example, how
long you have been browsing.
• New homepg – Set the current site as the homepage of
the WAP profile you are using.
54
Using bookmarks
You use bookmarks in your mobile phone just as you
do with a PC Internet browser. You can have up to a
maximum of 25 bookmarks.
Using mobile Internet
To work with bookmarks
1. Scroll to WAP services, YES, Bookmarks, YES.
2. Select the bookmark you want to work with, YES
3. Select one of the following options and press YES:
• Go to bookmark – Go to the marked WAP site.
• Edit bookmark – Edit the name and/or the WAP
address of the bookmark. See “Options when
browsing” on page 54 for more information.
• Delete – Delete the bookmark.
• Send SMS – This creates a text message in which the
WAP address is sent as a link.
WAP push messages
You can receive push messages via WAP Services.
This means that a service provider sends WAP content
to your phone without you having to do anything. You
can, for example, get updated news or new WAP
settings from your service provider.
There are two kinds of push messages:
• Text messages that inform you about WAP services, by
sending a link. To go to the WAP service, click the
link.
• Updated information from a WAP service is sent to
appear in the WAP browser.
• Load – The browser starts and loads the WAP site so
that you can see the push content.
• Delete – Deletes the push message.
• Postpone – Save the message, to be loaded later.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Receiving a push message
You can set your phone to either accept or reject push
messages. This is valid for all your WAP profiles.
To set push message acceptance
1. Scroll to WAP services, YES, WAP settings, YES,
Common, YES, Push access, YES.
2. Select one of the following settings:
• On – You allow push messages to be automatically
loaded.
• Off – You do not allow push messages.
Clearing Cache
You can clear the cache memory which contains
previously visited WAP pages. You may, for example,
want to clear the information on your transactions.
To clear the cache memory
1. Scroll to WAP services, YES, Clear cache, YES.
2. Empty cache? appears. Press YES.
When you receive a push message, it comes to the
Push inbox where you can respond to it.
To respond to a push message
• Scroll to WAP services, YES, Push inbox, YES and select
one of the following:
Using mobile Internet
55
Transferring and exchanging
information
Before you start
To communicate with another Bluetooth device, you
first need to pair your phone with the device – you do
this by adding the device to a list of paired devices in
your phone. To synchronize with your PC, and to
browse the Internet, you also need to download and
install software from the Ericsson Consumer web site
www.ericsson.com/consumers. You can exchange
items or play games without having to pair your phone
with the other device.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Bluetooth™ wireless technology
Your phone has built-in Bluetooth wireless technology
which makes it possible for you to connect your phone
wirelessly to other Bluetooth devices such as a headset,
PC or digital camera. You can, for example, have a
conversation via a cordless Bluetooth headset or
browse the Internet, wirelessly connected via a mobile
phone. You can automatically synchronize information
in your phone and your PC. You can also exchange, for
example, business cards, calendar items and pictures.
Note: We recommend that your
phone and the Bluetooth device you
are communicating with are within
a range of 10 metres. The
connection may be improved if
there are no solid objects in
between your phone and the other
Bluetooth device.
56
Transferring and exchanging information
Pairing
Pairing is the process of associating Bluetooth devices
with each other so that they can connect when they are
within range of each other. Your phone can be paired
with up to 10 Bluetooth devices. After pairing, the
operation mode of your phone is automatically set to
On. See “Operation modes” on page 57.
To initiate pairing with a device
1. Scroll to Connect, YES, Bluetooth, YES, Paired devices,
YES, Add device, YES , Phone initiates, YES.
A list of device types that can be paired with your
phone is shown. Scroll to a device type and press YES.
2. The phone searches for Bluetooth devices. A list of
available devices of the type you selected then appears
in the display. Select a device, YES.
3. Enter a passkey (up to 16 digits) for the device, both in
the phone and, for example, in the PC. (If a passkey
does not come with the Bluetooth device when you buy
it, you need to create one yourself.)
4. When the pairing has been completed, you can edit the
name tag for the device and press YES.
Select Edit order, YES. Then enter the position
number (2 - 20) you want for the device (position 1
is always for the headset).
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To accept pairing with a device
• Scroll to Connect, YES, Bluetooth, YES, Paired devices,
YES, Add device, YES, Phone accepts, YES and wait for
the other device.
Phone name
You can choose a name for your phone. This name is
shown in other devices when your phone is discovered,
and is also used for the infrared port.
• To enter a name, scroll to Connect/Phone name/Edit.
•
•
To organize your list of paired devices
1. Scroll to Connect, YES, Bluetooth, YES, Paired devices,
YES. Then:
• To edit the name tag of a device: scroll to the device
you want to edit, YES, scroll to Edit, YES. Then edit
the name tag, YES.
• To delete a device from the list: scroll to the device
and press
, YES.
• To change the order of the devices: scroll to the
device whose position you want to change, YES.
•
•
Operation modes
The following operation modes are available:
Off – the phone cannot send or receive any
information.
Automatic – the Bluetooth function is turned on
automatically when you start sending information such
as a business card or when you answer or make a call
via the Bluetooth headset.
On – the Bluetooth function is activated all the time
(until you change the mode). The phone can send and
receive information to and from a paired Bluetooth
device.
Discoverable – the phone can always receive
information from any Bluetooth device.
Transferring and exchanging information
57
Note: In countries where the use of Bluetooth wireless
technology is not allowed, you must ensure that the
Bluetooth function is set to Off.
The Discoverable and On modes reduce the standby
time and talk time.
Sending and receiving
To send an item using Bluetooth wireless technology,
you need to make sure that the devices are within 10
meters range of each other and that the operation mode
is set to Automatic or On.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
• To change the operation mode, scroll to Connect/
Bluetooth/Operation mode.
In order for your phone to be detected by other
Bluetooth devices, to receive information or to accept
pairing, you must make your phone discoverable.
To make the phone discoverable
• Scroll to Connect, YES, Bluetooth, YES, Discoverable,
YES. Your phone is discoverable for three minutes.
Searching for devices
You can search for Bluetooth devices and then, for
example, pair the device with your phone.
• To search for devices, scroll to Connect/Bluetooth/
Discover.
58
Transferring and exchanging information
To send an item
• After you select Bluetooth as the transfer method, the
phone searches for devices. A list of devices appears.
Select the device you want to send the item to and
press YES.
Tip: You can send certain items in your phone
(calendar overviews, appointments and tasks, business
cards, text messages) to specific Bluetooth printers.
Select the relevant printer in the list of devices.
To receive an item
To be able to receive an item, do one of the following:
• scroll to the Receive menu and press YES.
For example, to receive a calendar appointment, scroll
to Organizer, YES, Calendar, YES, Receive, YES.
• set the phone to Discoverable mode.
Light signals
• Steady blue light – the Bluetooth function is on and the
phone is charging.
• Blue light flashing slowly – the Bluetooth function is
on but no GSM network is within range.
• Blue light flashing rapidly – the Bluetooth function is
on and you are receiving an item or a pairing request.
• Green and blue light alternating slowly – the Bluetooth
function is on and a GSM network is within range.
To connect two devices
1. Place your phone as in the picture. The infrared port on
the phone must face the infrared port on the other
device.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Infrared port
You can use the built-in infrared modem to establish
contact between your phone and a PC or another
device equipped with an infrared port.
Note: If you are connecting to a PC, make sure your
PC has activated infrared communication (Start/
Settings/Control Panel/Infrared/Options tab/Enable
infrared communication).
1m
3' 3"
30°
Activate the infrared port
Before you can connect to another infrared device you
have to activate the infrared port in your phone.
• To activate the infrared port, scroll to Connect/Infrared
port. Select 10 minutes if you want the port to be
turned off 10 minutes after the last data transmission,
in order to preserve battery life.
2. Your phone now establishes contact with the other
device.
Synchronization
You can synchronize the calendar and phone book in
your phone with similar programs in, for example, a
Transferring and exchanging information
59
PC, PDA or mobile phone and with similar programs
on the Internet.
Internet synchronization
You can synchronize the calendar and contacts in your
phone with similar programs on the Internet, using
WAP. Contact your network operator for more
information about these programs on the Internet and
to receive user id, password and addresses for the
different programs. You must also have a WAP profile
set in your mobile phone. See “WAP profile settings”
on page 44.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Synchronization with nearby devices
After installing the synchronization program from the
Ericsson Consumer web site, www.ericsson.com/
consumers, you can synchronize your phone with your
PC. You can start the synchronization from your phone
or from the PC. If you use a cable, the synchronization
starts as soon as you connect the cable.
To start the synchronization
1. Scroll to Connect, YES, Synchronization, YES,
Synchronize, YES.
2. Select a synchronization method, YES.
• Use IR – for infrared communication.
• Use Bluetooth – for communication via Bluetooth
wireless technology. Select a device to synchronize
with from a list of paired devices and press YES. See
“Pairing” on page 56.
• Use WAP – See “Internet synchronization” on
page 60.
60
Transferring and exchanging information
To enter the WAP synchronization settings
1. Scroll to Connect, YES, Synchronization, YES,
Server settings, YES.
2. Select WAP profile, YES. In the list of WAP profiles,
select the one you want to use for synchronization.
3. Select Server user id, YES. Enter your user id for the
Internet calendar and phone book.
4. Select Server pwd, YES. Enter your password for the
Internet calendar and phone book.
5. Select Server URL, YES. Enter the Internet address of
the Internet calendar and phone book.
6. Select Calendar path, YES. Enter the Internet address,
user id and password for your calendar on the Internet.
7. Select Phonebook path, YES. Enter the Internet address,
user id and password for your phone book on the
Internet.
To receive a fax or data call (separate numbers)
1. Connect your phone to a computer.
2. Answer the call from within the software program (if it
does not answer automatically).
You cannot answer a fax or data call by pressing the
YES key on the phone.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Synchronization sound
The phone can make a sound when a synchronization
is completed or when a synchronization is initiated
from another device.
• To turn the synchronization sound on, scroll to
Connect/Synchronization/Sound.
Fax and data calls
Send fax and data calls
To send fax and data calls you need to connect
your phone to a computer, and then start the
appropriate software program.
One number
If you have a SIM card that does not support separate
fax and data numbers, the phone does not recognize
the type of incoming call.
If you want to receive a fax or data call, you have to
set the phone to one of these options. Once you have
set your phone for a specific incoming call, it stays like
this until you change it.
•To select the call type you want your next incoming call
to be, scroll to Calls/Next call/Next incoming.
Receive fax and data calls
The procedure of receiving fax and data calls depends
on your network and subscription. If you have separate
numbers for voice, fax and data calls, your phone will
recognize the type of call.
Transferring and exchanging information
61
More features
Stopwatch
Scroll to Organizer, YES, Stopwatch, YES.
To start, stop or re-start the stopwatch, press YES.
To save up to nine lap times, press
.
To check saved lap times, scroll using the joystick.
To reset the stopwatch, press
.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Alarm clock
The alarm can be set to ring at a specific time within 24
hours, or recurrently at a specific time on several days.
You can have both these alarms set at the same time.
Even if you have set your phone to silent, the alarm
and timer signals ring.
To set an alarm
1. Scroll to Organizer, YES, Alarms, YES, Alarm, YES.
2. Enter the time, YES.
• To change the alarm time, scroll to Organizer/Alarms/
Alarm/New time.
• Press any key to turn the alarm signal off when it rings.
If you do not want the alarm to be repeated, press YES.
• To cancel the alarm, scroll to Organizer/Alarms/
Alarm/Cancel.
• To set a recurrent alarm, scroll to Organizer/Alarms/
Recurrent alarm. Then enter the time and select the
days that you want the alarm to recur by scrolling and
pressing
. Press YES to exit the menu.
• To select an alarm signal, scroll to Settings/Sounds &
alerts/Alarm signal.
62
More features
•
•
•
•
Note: The stopwatch is turned off when you answer an
incoming call or when you exit the stopwatch menu.
Timer
The phone has a built-in 24-hour timer.
• To set the timer, scroll to Organizer/Timer. When the
signal rings, press any key to turn it off.
Calculator
The phone has a built-in calculator, which can add,
subtract, divide and multiply.
• Press
to get +, -, x, /.
• Press
to delete the figure.
• Press
to enter a decimal point.
Code memo
Instead of having to remember all the different security
codes for credit cards, for example, you can save them
in the code memo in your phone. Then all you need to
remember is the password to open the code memo. You
can save a maximum of 10 codes in the code memo.
2.
3.
4.
5.
Press YES.
Enter a four-digit password to open Code memo, YES.
Re-enter the new password to confirm.
Enter a checkword (maximum 15 characters), YES.
The checkword can consist of both letters and
numbers. To enter a number, press and hold the key.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Checkword and security
To confirm that you have entered the correct password
for the code memo and to prevent unauthorized access
to your codes, you must enter a checkword. When you
enter your password to open the code memo, the
checkword is shown for a short time. If the password is
correct, the correct codes are shown. If you enter the
incorrect password, the checkword and the codes that
are shown are also incorrect.
Factors strengthening the security of the Code
memo function are:
• You get no feedback about whether the password is
correct, except for the checkword, and only you know
the checkword.
• All codes are encrypted in the mobile phone.
• When you access your codes, they are shown for a
limited time only.
To open code memo for the first time
1. Scroll to Organizer, YES, Code memo, YES.
A message with instructions appears.
To add a new code
Scroll to Organizer, YES, Code memo, YES.
Enter your password.
Select Add new code?, YES.
Enter a name associated with the code, for example,
the name of the credit card company, YES.
5. Enter the code, YES.
1.
2.
3.
4.
To open code memo
1. Scroll to Organizer, YES, Code memo, YES.
2. Enter your password, YES.
Your entered checkword appears. When the decryption
process has finished, your codes are shown.
To change the password
1. Open code memo as described above.
2. Scroll to Options, YES, Chg password, YES.
3. Enter your new password, YES.
More features
63
4. Re-enter the new password, YES.
5. Enter a checkword, YES.
You can choose to add a new appointment or task, or to
use an old appointment or task as a template by
copying and editing it.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Forgot your password?
If you forget your password, just enter any password to
access the Code memo function. The checkword and
codes that are then shown are incorrect. You must now
reset the Code memo.
To reset code memo
1. Scroll to Options, YES, Reset, YES.
2. Reset code memo? appears. Press YES.
The Code memo is reset and all entries are cleared.
The next time you enter the Code memo, you must
start at “To open code memo for the first time” on
page 63.
Calendar
You can use the calendar to keep track of important
meetings that you need to attend, phone calls that you
need to make or tasks that you need to do.
Appointments and tasks
You can save up to 300 appointments and 80 tasks in
your calendars, depending on the size of each item.
64
More features
To add a new appointment
1. Scroll to Organizer, YES, Calendar, YES, Add
appointm., YES.
2. Enter the appropriate information, for example,
subject, location, icon and times. Confirm each entry
with YES.
3. If you want to set a reminder for your appointment,
select a reminder, YES.
4. A list of options appears.
If the appointment is recurrent:
• Select Recurrent app. and press YES.
Select the recurrence you want and press YES.
5. Confirm with Save and close, YES.
To add a new task
1. Scroll to Organizer, YES, Calendar, YES, Tasks, YES.
2. Select a category, YES.
• If the category is a phone call, enter the phone
number, YES.
3. Enter a subject, YES.
4. Enter a description, YES.
5. If you want to set a reminder for your appointment,
select a reminder, YES. Confirm with Save and close,
YES.
Calendar settings
• Select Options from the Organizer/Calendar menu and
then select one of the options:
• Status – Use this to check when you last
synchronized your calendar, how much space is left
for new appointments and tasks.
• Class view – You can choose whether to see only the
private calendar entries, only the public ones or
both.
• Reminders – Select Always if you want the reminder
to sound even though the phone is turned off.
• Profile switch – If you want the phone to remind
you to switch profile when a meeting is about to
start, select On.
• Delete all – Deletes all appointments and tasks in
the calendar.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Viewing your calendar
To view your calendar content, scroll to Organizer,
YES, Calendar, YES and then select one of the
following:
• View today – All appointments for today as well as
incomplete tasks are shown.
• View all tasks – This shows all your entered tasks.
Scroll to the task you want to view and press YES.
Press YES again to see options for the task.
• View month – Move within and among the weeks by
moving the joystick. Press YES to view a certain day.
Days on which you have appointments are marked
in bold.
• View week – Move within and among the days by
moving the joystick. Press YES to view a certain day.
Tip: In the monthly and weekly views, you can go to
next week by pressing 3, to next month by pressing 6
and to next year by pressing 9. You can go back a
week, a month or a year by pressing 1, 4, and 7
respectively. To reach the current day, press C.
Check the status
You can check when you last synchronized your
calendar or how much space is left for new
appointments and tasks
• To check the status, scroll to Organizer/Calendar/
Options/Status.
More features
65
Tip: To delete all appointments and tasks in your
calendar, select Delete all in the Options menu.
The recordings are saved in your mobile phone and
can be accessed even if you change your SIM card.
Exchanging calendar entries
You can send and receive appointments and tasks using
Bluetooth wireless technology or the infrared port.
Note: In some countries or states it is required by law
that you inform the other person before recording the
call.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To send an appointment or a task
1. In the list of appointments and tasks for a certain day,
scroll to the item you want to send and press
.
2. Scroll to Send, YES.
3. Select a transfer method, YES.
If you use infrared make sure that the infrared ports are
facing each other.
To receive an appointment or a task
1. Scroll to Organizer, YES, Calendar, YES, Receive, YES.
2. Press YES to save the appointment or task in the
calendar. If your calendar is full, you must remove
calendar items before you can save any new ones.
Voice memo
With the Voice memo function, you can record either
your own memos or calls. The recording is terminated
if any party hangs up.
66
More features
To start a voice memo
• Scroll to Organizer, YES, Voice memo, YES, Record,
YES. Wait until you hear a tone. When the recording
starts, the display shows Recording together with the
time left to record.
To end the recording
• Press NO.
Tip: You can start recording or listening to recordings
with a voice command. See “Voice control” on
page 29.
The recording stops automatically if you receive an
incoming call or when the call ends. You hear a tone a
few seconds before the sound memory is full.
Listening to recordings
You can listen to your recordings at any time, except
during a call.
1.
2.
3.
4.
Settings
You can choose to show the date and time or length of
the recording, or both.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
To listen to your recordings
Scroll to Organizer, YES, Voice memo, YES.
Scroll to the recording you wish to hear, YES
If you want to:
• Pause, press YES. Press YES again to play.
• Go to next or previous: move the joystick up or
down, respectively.
• Go fast forward or rewind: move and hold the
joystick right or left, respectively.
Press NO to stop playback.
To erase or rename a voice memo
1. Scroll to Organizer, YES, Voice memo, YES.
2. Press down to scroll to the recording you wish to erase
or rename.
3. Press
when the recording is highlighted.
4. Select Erase or Rename, YES.
To set the view of your recordings
1. Scroll to Organizer, YES, Voice memo, YES, Set view,
YES .
2. Select Date, Time or Length, or all, YES.
Games
Your phone has several games. You can play some of
the games with another person, both using your phone,
or you can play on two phones, using Bluetooth
wireless technology or IR. Help texts are available in
each game.
1.
2.
3.
4.
To start a game
Scroll to Fun & Games, YES, Games, YES.
Select a game, YES.
Select New game or Resume game, YES.
Start the game.
To erase all recordings
• Proceed as above, but select Erase all instead of Erase.
More features
67
How to control the games:
Use the joystick to move up, down, left or right and to
select an item, or use the keys as follows:
= undo
= reset
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
= up
= left
= pause
= save and quit
= down
= right
= select/deselect
= confirm
Erix
The aim of Erix is to black out the display, without
being hit by a ball.
GAME
The aim of GAME is to shoot the alien invaders before
they kidnap and kill all humans on the planet. You
control a fighter craft equipped with a gun and smart
bombs.
= fire smart bombs
= fire gun
Q
The aim of Q is to get all the coloured balls through
their portals. The red ball goes into the red portal and
so on.
68
More features
Ripple
The aim of Ripple is to turn as many pieces as possible
into your colour. Black always begins the game.
Solitaire
The aim of all the Solitaire games is to form four piles
of cards, one per suit, running from ace to king.
= select card, confirm move
= deal from deck
= put card on foundation pile
= view current pile
= access deck
Tetris®
The aim of Tetris is to prevent the blocks from
reaching the top of the playing board. Each time you
fill a line, that line disappears.
and
= rotate
Tetris®; © Elorg 1987. Classic Tetris™; © Elorg 1998
Tetris Logo by Roger Dean; ©The Tetris Company 1997
All Rights Reserved
Security
Note: If the message “Codes do not match” appears,
you entered the new PIN incorrectly. If the message
“Wrong PIN” appears, followed by “Old PIN:”, you
entered your old PIN incorrectly.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
SIM card lock
The SIM card lock protects your subscription, but not
your phone itself, from unauthorized use. If you
change SIM cards, the phone still works with the new
SIM card.
Most SIM cards are locked at the time of purchase.
If the SIM card lock is on, you have to enter a “PIN”
(Personal Identity Number) every time you turn on
your phone.
If you enter your PIN incorrectly three times in a
row, the SIM card is blocked. This is indicated by the
message PIN blocked. To unblock it you need to enter
your “PUK” (Personal Unblocking Key). Your PIN
and PUK are supplied by your operator.
To unblock your SIM card
1. PIN blocked appears in the display.
2. Enter your PUK and press YES.
3. Enter a new four- to eight-digit PIN and press YES.
4. Re-enter the new PIN to confirm and press YES.
• To edit your PIN2, scroll to Settings/Locks/SIM lock/
Change PIN2.
To turn the SIM card lock on or off
1. Scroll to Settings, YES, Locks, YES, SIM lock,
YES , Protection, YES .
2. Select On or Off, and press YES.
3. Enter your PIN and press YES.
Phone lock
The phone lock protects the phone against
unauthorized use if it is stolen and the SIM card is
exchanged. It is not on when you buy the phone. You
can change the phone lock code (0000) to any four- to
eight-digit personal code. The phone lock can be set to
on, automatic or off.
• To edit your PIN, scroll to Settings/Locks/SIM lock/
Change PIN.
Security
69
Phone lock on
If the phone lock is on, the message Phone locked
appears each time you turn on the phone. You have to
enter your code followed by YES to use your phone.
Troubleshooting
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Automatic
If the phone lock is set to automatic, you do not need to
enter your phone lock code until a different SIM card
is inserted in the phone.
• To edit your phone lock code, scroll to Settings/Locks/
Phone lock/Change code.
Note: It is important that you remember your new
code. If you should forget it, you have to hand in your
phone to your local Ericsson retailer.
To set the phone lock
1. Scroll to Settings, YES, Locks, YES, Phone lock, YES,
Protection, YES.
2. Select an alternative and press YES.
3. Enter the phone lock code and press YES.
70
Troubleshooting
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but most of
the problems you can easily correct yourself.
The phone cannot be switched on
Hand-held phone
Recharge or replace the battery. See “SIM card and
battery information” on page 4.
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it may
take up to 30 minutes before the battery icon appears in
the display.
Menu language
If the display shows a language that you do not
understand, you can always choose Automatic
(determined by your SIM card) by pressing
8888
in standby. You can always choose English by
pressing
0000
in standby.
Grey menu options
Grey text indicates a function that is
temporarily unavailable, for example due to
your subscription or due to a certain setting
which has not been turned on.
No network
There is no network within range or the received signal
is too weak. You have to move to get a signal that is
strong enough.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Error messages
Insert SIM
There is no SIM card in the phone or you may have
inserted it incorrectly. Insert a SIM card. See “SIM
card and battery information” on page 4.
Insert correct SIM card
The phone is set to work only with certain SIM cards.
Insert the correct SIM card.
SOS calls only
You are within range of a network, but you are not
allowed to use it. However, in an emergency, some
operators allow you to call the international emergency
number 112. See “Making emergency calls” on
page 24.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2 incorrectly.
• Enter the correct PIN or PIN2, and press YES. See
“SIM card lock” on page 69.
Codes do not match
When you want to change a security code (for example
your PIN) you have to confirm the new code by
entering it again. The two codes that you have entered
do not match. See “SIM card lock” on page 69.
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2 incorrectly three
times in a row. To unblock, see “SIM card lock” on
page 69.
PUK blocked – contact operator
You entered your personal unblocking key code (PUK)
incorrectly 10 times in a row. Contact your network
operator or service provider.
Troubleshooting
71
Phone locked
The phone is locked. To unlock the phone, see “Phone
lock” on page 69.
Additional information
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Phone lock code:
Your phone comes with the phone lock code, 0000.
You can change it to any four- to eight-digit code. See
“Phone lock” on page 69.
Number not permitted
The Fixed Dialling function is on and the number you
have dialled is not on your fixed numbers list. See
“Fixed dialling” on page 38.
Charging, alien battery
The battery you are using is not an Ericsson-approved
battery and is charging slowly for safety reasons.
72
Additional information
Ericsson Consumer web site
On www.ericsson.com/consumers you will find a
support section where help and tips are only a few
clicks away. Here you find the latest software updates,
tips on how to use your product more efficiently,
function guides for some of the products and additional
help when you require it.
Guidelines for Safe and Efficient Use
Please read this information before using your mobile
phone.
product failures which have been caused by use of nonEricsson original accessories.
• Treat your product with care, keep it in a clean and
dust-free place.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Your mobile phone is a highly sophisticated electronic
device. To get the most out of your mobile phone, please
read this text about product care, and safe and efficient
use.
PRODUCT CARE
• Do not expose your product to liquid or moisture or to
humidity.
• Do not expose your product to extreme high or low
temperatures.
• Do not expose your product to lit candles, cigarettes, or
cigars, or to open flames etc.
• Do not drop, throw or try to bend the product as rough
treatment could damage it.
• Do not paint your product as the paint could obstruct the
earpiece, microphone or any moveable parts and prevent
normal use.
• Do not attempt to disassemble your product. The
product does not contain consumer serviceable
components. Only Ericsson Service Partners should
perform service.
• Do not use any accessories other than Ericsson
originals. Use of non-Ericsson original accessories may
result in loss of performance, damage to the product, fire,
electric shock or injury. The warranty does not cover
ANTENNA CARE
• To avoid impaired performance, please ensure that your
mobile phone’s antenna is not damaged.
• Do not remove the antenna yourself. If your mobile
phone’s antenna is damaged, please take it to an
Ericsson Service Partner.
• Only use an Ericsson original antenna that has been
specifically designed for your mobile phone. Use of
unauthorised antennas, modifications, or attachments
could damage the mobile phone and may violate the
appropriate regulations, causing loss of performance and
SAR levels above the recommended limits (see below).
EFFICIENT USE
For optimum performance with minimum power
consumption please:
• Hold the mobile phone as you would any other
telephone. While speaking directly into the mouthpiece,
angle the antenna in a direction up and over your
shoulder.
• Do not touch the antenna when the mobile phone is in
use. Touching the antenna affects call quality, may cause
the mobile phone to operate at a higher power level than
needed and may shorten talk and standby times.
Additional information
73
• If your mobile phone is equipped with an infrared eye,
never direct the infrared ray at anyone’s eye and make
sure that it does not disturb any other infrared units.
This is because the phone is designed to use the
minimum power required to reach the network.
Therefore, the closer you are to a base station, the more
likely it is that the actual SAR level will decrease.
Variations in SAR below the radio frequency exposure
guidelines do not mean that there are variations in safety.
While there may be differences in SAR levels among
mobile phone models, all mobile phone models must be
designed to meet radio frequency exposure guidelines.
More information on radio frequency exposure and
SAR can be found on: www.ericsson.com/health.
* Examples of radio-frequency exposure guidelines
and standards that Ericsson mobile phone models are
designed to conform to:
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP), “Guidelines for limiting exposure to
time-varying electric, magnetic, and electromagnetic
fields (up to 300 GHz)”, Health Physics, vol. 74, pp 494522, April 1998.
• 99/519/EC, “Council Recommendation of 12 July 1999
on the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz)”, Official
Journal of the European Communities, 1999.
• IEEE C95.1-1991, “Safety levels with respect to human
exposure to radio frequency electromagnetic fields, 3
kHz to 300 GHz”, The Institute of Electrical and
Electronics Engineers Inc. (IEEE).
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
RADIO FREQUENCY (RF) EXPOSURE AND
SAR
Your mobile phone is a low-power radio transmitter and
receiver. When it is turned on, it emits low levels of radio
frequency energy (also known as radio waves or radio
frequency fields).
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organizations*, e.g. ICNIRP
(International Commission on Non-Ionizing Radiation
Protection), through periodic and thorough evaluation of
scientific studies. These guidelines establish permitted
levels of radio wave exposure for the general population.
All Ericsson mobile phone models are designed to
operate within these stringent levels. The levels include a
safety margin designed to assure the safety of all
persons, regardless of age and health, and to account for
any variations in measurements.
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
absorbed by the body when using a mobile phone. The
SAR value is determined at the highest certified power
level in laboratory conditions, but the actual SAR level of
the phone while operating can be well below this value.
74
Additional information
• FCC Report and Order, ET Docket 93-62, FCC 96-326,
Federal Communications Commission (FCC), August
1996.
• Radiocommunications (Electromagnetic Radiation
Human Exposure) Standard 1999, Australian
Communications Authority (ACA), May 1999.
Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do not place objects,
including either installed or portable wireless equipment,
in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could
result.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
DRIVING
Please check if local laws and regulations, in the country/
state where you are driving, restrict the use of mobile
phones while driving. Law in many countries/states
requires drivers to use a Vehicle or Portable Hands Free
solution. If so, it is recommended that you use Ericsson
Portable Hands Free solutions only with this Ericsson
mobile phone model.
Ericsson is concerned about your safety. Always give
full attention to driving and pull off the road and park
before making or answering a call if driving conditions so
require.
RF energy may affect some electronic systems in
motor vehicles such as car stereo, safety equipment etc.
In addition, some vehicle manufacturers do not allow use
of mobile phones in their vehicles, unless a hands free kit
with an external antenna supports the installation. Check
with your vehicle manufacturer’s representative to be
sure that your mobile phone will not affect the electronic
systems in your vehicle.
ELECTRONIC DEVICES
Most modern electronic equipment, for example
equipment in hospitals and cars, is shielded from RF
energy. However, certain electronic equipment is not,
therefore:
• Do not use your mobile phone near medical equipment
without requesting permission.
Mobile phones may affect the operation of some
implanted cardiac pacemakers and other medically
implanted equipment. Pacemaker patients should be
aware that the use of a mobile phone very close to a
pacemaker might cause the device to malfunction. Avoid
placing the mobile phone over the pacemaker, e.g. in
your breast pocket. When using the mobile phone, place
it at the ear opposite the pacemaker. If a minimum
distance of 15 cm (6’’ inches) is kept between the mobile
phone and the pacemaker, the risk of interference is
limited. If you have any reason to suspect that
interference is taking place, immediately turn off your
Additional information
75
mobile phone. Contact your cardiologist for more
information.
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Turn your mobile phone off in any facility where posted
notices so require.
Do not transport or store flammable gas, liquid, or
explosives in the same compartment of your vehicle that
contains your mobile phone and accessories.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
AIRCRAFT
• Turn off your mobile phone before boarding any aircraft.
• To prevent interference with communication systems,
you must not use your mobile phone while the plane is in
the air.
• Do not use it on the ground without permission from the
crew.
EXPLOSIVE ATMOSPHERES
Turn off your mobile phone when in any area with a
potentially explosive atmosphere. It is rare, but your
mobile phone or its accessories could generate sparks.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include
fuelling areas, below deck on boats, fuel or chemical
transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or
metal powders.
76
Additional information
POWER SUPPLY
• Connect the AC power adapter only to designated power
sources as marked on the product.
• To reduce risk of damage to the electric cord, remove it
from the outlet by holding onto the AC adapter rather
than the cord.
• Make sure the cord is positioned so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
• To reduce risk of electric shock, unplug the unit from any
power source before attempting to clean it.
• The AC power adapter must not be used outdoors or in
damp areas.
• DANGER - Never alter the AC cord or plug. If the plug
will not fit into the outlet, have a proper outlet installed by
a qualified electrician. Improper connection can result in
risk of electric chock.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR
MOBILE PHONE OR ITS ACCESSORIES. THEY
COULD HURT THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE
PHONE OR ACCESSORY. YOUR MOBILE PHONE OR
ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT
COULD BE DETACHED AND CREATE A CHOKING
HAZARD.
The battery can only be charged in temperatures
between +5°C (+41°F) and +45°C (+113°F).
DISPOSING OF THE PRODUCT
BATTERY USE AND CARE
The product should never be placed in municipal waste.
Please check local regulations for disposal of electronic
products.
A rechargeable battery has a long service life if treated
properly. A new battery or one that has not been used for
a long time could have reduced capacity the first few
times it is used.
The talk and standby times depend on the actual
transmission conditions when using the phone. If the
phone is used near a base station, less power is required
and talk and standby times are prolonged.
Use only Ericsson original batteries and chargers. Using
other batteries and chargers could be dangerous, and
the warranty does not cover product failures which have
been caused by use of non-Ericsson original batteries
and chargers.
Do not expose the battery to extreme temperatures,
never above +60°C (+140°F). For maximum battery
capacity, use the battery in room temperature. If the
battery is used in low temperatures, the battery capacity
will be reduced.
Turn off your phone before removing the battery.
Use the battery for the intended purpose only.
Do not attempt to take the battery apart.
Do not let the metal contacts on the battery touch another
metal object. This could short-circuit and damage the
battery.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
EMERGENCY CALLS
IMPORTANT!
This mobile phone, like any mobile phone, operates
using radio signals, cellular and landline networks as well
as user-programmed functions, which cannot guarantee
connection under all conditions. Therefore you should
never rely solely upon any mobile phone for essential
communications (e.g. medical emergencies).
Remember, in order to make or receive calls, the
mobile phone must be switched on and in a service area
with adequate cellular signal strength. Emergency calls
may not be possible on all cellular phone networks or
when certain network services and/or mobile phone
features are in use. Check with your local service
provider.
BATTERY INFORMATION
CHARGING THE BATTERY
The battery delivered with your phone is not fully
charged. We recommend that you charge the battery for
4 hours before you use the phone for the first time.
•
•
•
•
•
•
•
Additional information
77
• Do not expose the battery to open flames. This could
cause the battery to explode.
• Do not expose the battery to liquid.
• Do not allow the battery to be put into the mouth. Battery
electrolytes may be toxic if swallowed.
time of its original purchase by a consumer, and for a
subsequent period of one (1) year.
Any Ericsson accessory is covered by a warranty
period of one (1) year from the date of its original
purchase by a consumer in accordance with the
applicable terms and conditions stipulated herein.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
DISPOSING OF THE BATTERY
The battery should never be placed in
municipal waste. Please check local
regulations for disposal of batteries.
Limited Warranty
Thank you for purchasing this Ericsson Product. To get
maximum use of your new Product, we recommend that
you follow a few simple steps:
• Read the Guidelines for Safe and Efficient Use.
• Read all the terms and conditions of your Ericsson
Warranty.
• Save your original receipt. You will need it for warranty
repair claims. Should your Ericsson Product need
warranty service, please return it to the dealer from
whom it was purchased, or contact your local Ericsson
Certified Call Center or visit www.ericsson.com/
consumers to get further information.
OUR WARRANTY
Ericsson Mobile Communications AB, Torshamnsgatan
27, 164 80 Stockholm, Sweden, warrants this Product to
be free from defects in material and workmanship at the
78
Additional information
WHAT WE WILL DO
If, during the warranty period, this Product fails to
operate under normal use and service, due to improper
materials or workmanship, Ericsson subsidiaries,
authorised distributors or Ericsson Service Partners will,
at their option, either repair or replace the Product in
accordance with the terms and conditions stipulated
herein.
CONDITIONS
1. The warranty is valid only if the original receipt issued to
the original purchaser by the dealer, specifying the date
of purchase and serial number, is presented with the
Product to be repaired or replaced. Ericsson reserves the
right to refuse warranty service if this information has
been removed or changed after the original purchase of
the Product from the dealer.
2. If Ericsson repairs or replaces the Product, the repaired
or replaced Product shall be warranted for the remaining
time of the original warranty period or for ninety (90) days
from the date of repair, whichever is longer. Repair or
replacement may involve the use of functionally
3.
4.
5.
6.
7.
equivalent reconditioned units. Replaced faulty parts or
components will become the property of Ericsson.
This warranty does not cover any failure of the Product
due to normal wear and tear, or due to misuse, including
but not limited to use in other than the normal and
customary manner, in accordance with Ericsson’s
instructions for use and maintenance of the Product. Nor
does this warranty cover any failure of the Product due to
accident, modification or adjustment, acts of God,
improper ventilation or damages resulting from liquid.
This warranty does not cover Product failures due to
improper repair installations, modifications or service
performed by a non-Ericsson Service Partner or opening
of the Product by non-Ericsson certified persons.
The warranty does not cover Product failures which have
been caused by use of non-Ericsson original
accessories.
Tampering with any of the seals on the Product will void
the warranty.
THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL ERICSSON BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS,
TO THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damage, or
limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s
statutory rights under applicable national legislation in
force, nor the consumer’s rights against the dealer
arising from their sales/ purchase contract.
INTERNATIONAL SERVICE
You can have your Ericsson Product serviced within the
warranty period in any country where an identical
Product is sold by an authorised Ericsson distributor. To
find out if your Product is sold in the country you are in,
please call the Ericsson Certified Call Center. In order to
be granted service, you have to present your original
receipt specifying the date of purchase and serial
number. Please observe that certain services may not be
possible elsewhere than in the country of original
purchase, for example due to the fact that your Ericsson
Product may have an interior or exterior which is different
from equivalent models sold in other countries. It may not
be possible to repair SIM-locked Products.
Additional information
79
Declaration of Conformity
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob 0682
on
s
s
c
i
Er
We, Ericsson Mobile Communications AB of
Torshamnsgatan 27
S-164 80 Stockholm, Sweden
declare under our sole responsibility that our product
Ericsson type 113 0201-BV
and in combination with our accessories, to which this
declaration relates is in conformity with the appropriate
standards 3GPP TS 51.010-1, EN 301489-7,
EN 300328, EN 300826 and EN 60950, following the
provisions of, Radio Equipment and Telecommunication
Terminal Equipment directive 99/5/EC with requirements
covering EMC directive 89/336/EEC, and Low Voltage
directive 73/23/EEC.
Stockholm, June 2001
Place & date of issue
Anders Torstensson, Vice President Product Development
We fulfil the requirements of the R&TTE Directive (99/5/
EC).
80
Additional information
FCC Statement
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (i.e. at the ear and worn on the
body) as required by the FCC for each model. Body worn
measurements are made while the phone is in use and
worn on the body with an Ericsson accessory. The
design and composition of an accessory can affect the
body worn SAR (Specific Absorption Rate) levels for the
phone. Ericsson has not measured, and makes no
representation about, the body worn SAR levels when
the phone is used with non-Ericsson accessories.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
This device must accept any interference received,
including interference that may cause undesired
operation.
Icons
Description
Tells you the strength of the GSM network
signal.
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
The table below shows icons which may appear in
standby or in the menus.
Icon
Icon
Description
Your personal phone book.
Handling of text and voice messages.
GPRS is within range.
GPRS is within range and can be used.
You cannot receive any incoming calls.
Tells you the status of the battery.
Handling of call time, call cost information
and ongoing calls.
Handling of pictures, sounds and themes.
Play games.
Personal settings, profiles, divert calls,
networks and voice control.
Gives you access to WAP services on the
Internet.
All incoming calls are diverted to a defined
number.
No calls or only certain calls from numbers in
a list are received.
Calendar, notes, alarm clock and other extras.
All signals are turned off, except the alarm
and timer.
Bluetooth function, synchronization,
infrared port.
A selection of your most frequently used
functions.
Help text.
You have missed an incoming call.
The ring signal is turned off.
The alarm clock has been set and is on.
You have received a text message.
You have received a voice message.
Icons
81
Icon
Description
Icon
Description
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
You have received an e-mail message.
A missed call in the call list.
You have received a WAP push message.
An answered call in the call list.
The Bluetooth function is on.
A dialled number in the call list.
The Bluetooth function is in discoverable
mode.
A group of contacts in the phone book.
Bluetooth communication is in progress.
A text message has not been read.
A text message is saved on the SIM card.
The infrared port is on.
Melody inserted in a message.
Infrared communication is in progress.
A voice message has not been checked.
Line 1 is in use for outgoing calls.
Line 2 is in use for outgoing calls.
Ciphering is currently not being provided by
the network.
The keypad is locked.
82
You can enter the phone book by pressing
A home number in the phone book.
A work number in the phone book.
A mobile number in the phone book.
The card lock or phone lock is on.
A secure WAP connection is established.
A fax number in the phone book.
An ongoing call.
Another number in the phone book.
Icons
.
Icon
Description
Icon
Description
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
An e-mail address in the phone book.
Other Bluetooth device.
A voice command has been recorded for a
contact name.
The appointment is a meeting.
You have recorded a sound.
The appointment is a date.
An e-mail message has not been read.
The appointment is to travel.
An e-mail message has been read.
The appointment is a vacation.
Only part of an e-mail message is saved in
the phone.
An e-mail message, not read, will be deleted
the next time you connect to the server.
A Bluetooth headset, not paired with your
phone.
The appointment is an anniversary.
A recurrent calendar appointment.
A Bluetooth headset, paired with your phone.
A reminder is set for a calendar appointment.
A Bluetooth phone, paired with your phone.
The task is a phone call.
A Bluetooth PC, paired with your phone.
A miscellaneous task.
A Bluetooth printer, paired with your phone.
A completed task in your calendar.
A Bluetooth PDA, paired with your phone.
A task of high priority.
A miscellaneous appointment.
An all day calendar appointment.
Icons
83
Icon
Description
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
A task of low priority.
The network is preferred and can be used.
The network is forbidden and cannot be used.
Your home network is within range and can
be used.
Message with high priority.
Message with low priority.
Pre-defined text message template.
User-defined text message template.
84
Icons
Index
settings 65
status 65
view 65
Call costs 33
calling card 37
credit limit 34
minute minder 20
Call time 33
Calling 23
automatic re-dialling 24
call list 25
fixed dialling 38
groups 27
speed dialling 28
Calls
accept 39
answer 24
divert 34
emergency 24
international 24
missed 25
put on hold 35
reject 24
restrict 38
Cell information 51
Charging 4
Code memo 62
add new code 63
checkword and security 63
password 63
reset 64
Conference calls 36
add new participants 36
end 36
join two calls 36
release a participant 36
Contacts
add 25
call 25
copy 28
edit 26
send 27
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
A
Alarm clock 62
Answering mode 21
Area information 51
Assembling the phone 3
B
Battery 4
Bluetooth wireless technology 56
discoverable mode 58
light signals 59
operation modes 57
pairing 56
receive an item 58
searching 58
send an item 58
Business cards 27
C
Calculator 62
Calendar 64
add a task 64
add an appointment 64
exchanging entries 66
D
Data calls 61
Data counters 44
Declaration of conformity 80
Display
greeting 21
help texts 9
light 20
85
own greeting 21
Display icons 81
Diverting calls 34
closed user groups 39
conference calls 36
keypad 21
phone 69
SIM card 69
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
E
E-mail 51
archiving 52
read 52
reply 52
send 51
write 51
Emergency calls 24
Entering letters
multitap text input 12
T9 text input 14
Ericsson Consumer web site 72
Error messages 71
F
Fax, sending and receiving 61
Fixed dialling 38
G
Games 67
Greeting 21
Groups 27
86
H
Handsfree 21
Help texts 9
I
Icons in display 81
Infrared port 59
activating 59
connect two devices 59
International calls 24
International emergency number 24
K
Key functions 6
Key sound 20
Keypad lock 21
automatic 22
manual 22
L
Language in display 20
Light 20
Light signals 59
Locks
M
Magic word 31
Making calls 5, 23
Melodies, see Ring signals 18
Menu language 20
Menu overview 11
Message options 50
Missed calls 25
Mobile Internet 53
bookmarks 54
browsing 53
options 54
push messages 54
Mobile Internet settings 41
e-mail account 46
GPRS data 42
GSM data 43
locks 46
manual set up 42
preferred mode 43
receiving in a text message 41
security 45
WAP profile 44
My shortcuts 22
automatic activation 23
selecting 22
PUK 69
activating/cancelling 69
Sound recorder
end 66
listen 67
settings 67
start 66
Speed dialling 28
Stopwatch 62
Synchronization 59
Internet synchronization 60
sound 61
start 60
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
N
Networks 40
O
Online services 10
P
Passkey 57
Pause 8
Personal ring signal 19
Phone book 25
memory 28
Phone lock 69
activating/cancelling 70
changing the security code 70
Pictures 16
background picture 17
edit 16
exchanging 17
PIN
changing 69
PIN2
changing 69
Profiles 22
Q
Quick keys 7
R
Reset 15
Ring signal
personal 19
Ring signals 18
increasing 19
increasing ring 19
key sound 20
personal 19
turn off 19
S
Settings
profiles 22
Shortcuts 7, 9, 22
Silent ring signal 19
SIM card 4, 10
copy contacts 28
unblocking 69
SIM card lock 69
T
T9 Text Input 14
Text messages 48
format text 49
insert object 48
read 49
save 49
send 48
templates 50
write 48
Themes 15
Time settings 20
advanced settings 21
87
set date 20
set time 20
Timer 62
Turn the phone on/off
animation 5
greeting 5
networks 5
PIN 5
Two voice lines 36
W
WAP, see Mobile Internet 53
Warranty 78
B
A
e
s ns
U
l
tio
a
i
a
rc nic
e
m mu
m
o om
C
or ile C
f
t
o
N Mob
on
s
s
c
i
Er
V
Vibrating alert 20
Voice answering 30
Voice control 29
answering 30
before voice dialling 29
changing profiles 31
dialling 30
editing voice commands 32
magic word 31
recording voice memos 31
reject 30
tips 30, 32
Voice dialling 30
Voice mail 33
Voice memo 66
88
Download PDF

advertising