Interwoven 3073968 Alterna - Upper Cabinets & Filler Panels Assembly Instructions

Alterna
Assembly Instructions
™
1
Upper Cabinets With
Filler Panels
Figure A
Figure B
Tools Required
•
•
•
•
Pencil
Tape Measure
Level (4 feet or greater)
or Laser Level
Hand Clamps
•
•
•
•
Variable Speed Drill
With Torque Options
Drill Bit Set
Screw Bit Set
Portable Table Saw or
Circular saw
Hardware Included
•
•
8 X 5/8” screws
L-Brackets
Figure C
Figure D
Installation
1.
Remove doors from cabinet (Figure A).
2.
Mount the upper cabinet to the structural wall using the
Upper & Wall-hanging Base Cabinets instructions. Once
the cabinet is properly mounted in the correct location,
measure the distance between the cabinet end panel and the
wall. Make sure to measure the front and top. (Figure B).
Figure E
Figure F
3. Take the filler panel and measure the distances from step 2.
Draw a straight line between the markings and cut the panels
along the line. (Figure C).
Note: Tape along cut line to prevent cracking.
4.
After the filler panel is cut to size, remove the cabinet from
the wall and attach the filler panels to the cabinet with the
provided L-brackets using 8 x 5/8” screws. (Figure D).
Note: The optional use of hand clamps can be used to secure
fillers to the cabinet while attaching
5.
Place cabinet in position from step 2 and re-attach it to the
wall. (Figure E).
6.
Mount the next upper cabinet to the structural wall, keeping
it flush to previous cabinet, using the Upper & Wallhanging Base Cabinets instructions. (Figure F).
Figure G
Optional: Cabinets can be fastened together by screwing
8 x 1 1/4” screws through back hole of the door hinges.
(Figure G). If using two open cabinets attach screws 2”
from top and bottom and 2” in from front edges.
Note: Fastening cabinets together will deface the end panels
that are attached.
7.
Re-install doors to complete install.
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Customer Care.
Part No. 3073968 Revision -
">