T609.book Page 1 Monday, April 17, 2006 10:30 PM
SGH-t609
PORTABLE Quad-Band
TELEPHONE
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea
Code No.: GH68-09542A
English 04/2006. Rev. 1.0
T609.book Page 2 Monday, April 17, 2006 10:30 PM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship.
You may not infringe or otherwise violate the rights secured by the
Intellectual Property. Moreover, you agree that you will not (and will
not attempt to) modify, prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the Intellectual Property
is transferred to you. All applicable rights of the Intellectual Property
shall remain with SAMSUNG and its suppliers.
The Bluetooth® word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Samsung Electronics Canada,
Inc. is under license. Other trademarks and trade names are those of
their respective owners.
©2006 Samsung Electronics Canada, Inc.. SAMSUNG is a registered
trademark of Samsung Electronics Co., Ltd. and its related entities.
T609.book Page i Monday, April 17, 2006 10:30 PM
Table of Contents
Important Safety Precautions.......................................... 1
Your Phone................................................................ 3
Features of Your Phone............................................................................
Phone Layout ...........................................................................................
Display .....................................................................................................
Camera.....................................................................................................
Memory Card ...........................................................................................
3
3
7
9
9
Getting Started ......................................................... 10
Installing the SIM Card........................................................................... 10
Charging a Battery.................................................................................. 12
Switching the Phone On or Off............................................................... 14
Call Functions .......................................................... 15
Selecting Functions and Options............................................................
Making a Call..........................................................................................
Adjusting the Volume.............................................................................
Answering a Call ....................................................................................
Viewing Missed Calls .............................................................................
Silent Mode............................................................................................
15
16
19
19
20
22
Options During a Call .................................................. 23
Putting a Call on Hold ............................................................................
Using the Menu Functions .....................................................................
Switching the Microphone Off (Mute) ....................................................
Muting or Sending Key Tones ................................................................
Sending a Sequence of DTMF Tones......................................................
Searching for a Number in the Contacts list...........................................
Using Text Messages .............................................................................
Call Waiting............................................................................................
Making a Multi-party Call .......................................................................
23
23
24
25
25
25
26
26
27
Entering Text ........................................................... 29
Changing the Text Input Mode ...............................................................
Using T9 Mode.......................................................................................
Using Alphabet Mode.............................................................................
Using Number Mode ..............................................................................
29
30
31
33
i
T609.book Page ii Monday, April 17, 2006 10:30 PM
Using Symbol Mode............................................................................... 33
File Transfers between your Phone and PC........................ 34
Transferring files over the USB cable ..................................................... 34
Transferring Files via Bluetooth.............................................................. 35
Transferring Files via your TransFlash card............................................ 36
Menus.................................................................... 40
List of Menu Functions........................................................................... 41
Recent calls ............................................................ 49
All calls...................................................................................................
Missed calls ...........................................................................................
Calls made .............................................................................................
Calls received .........................................................................................
Delete all ................................................................................................
Call time .................................................................................................
49
49
50
50
51
51
Messages................................................................ 53
Instant Messaging..................................................................................
Create new message ..............................................................................
My messages .........................................................................................
Templates ..............................................................................................
Voice mail ..............................................................................................
Delete all ................................................................................................
Settings..................................................................................................
Broadcast messages ..............................................................................
Memory status .......................................................................................
Samsung PC Studio 3 ............................................................................
53
54
58
60
61
62
63
66
66
66
Games.................................................................... 67
Get Games ............................................................................................. 67
My games .............................................................................................. 67
Applications ............................................................ 69
Alarm .....................................................................................................
Calendar.................................................................................................
Task .......................................................................................................
Calculator...............................................................................................
Converter ...............................................................................................
Timer......................................................................................................
ii
69
71
73
74
75
75
T609.book Page iii Monday, April 17, 2006 10:30 PM
Stopwatch .............................................................................................. 76
World time ............................................................................................. 76
Rogers Mall ............................................................. 77
Get Ring tunes .......................................................................................
Get Music...............................................................................................
Get Games .............................................................................................
Get Graphics ..........................................................................................
Get Video ...............................................................................................
Get Celebrity Voicemail ..........................................................................
Get My Pix - Online Album .....................................................................
Navigate Home.......................................................................................
77
77
77
77
78
78
78
78
Media .................................................................... 81
Camera...................................................................................................
MP3 Player.............................................................................................
Record audio..........................................................................................
Rogers Music Store ...............................................................................
Voice recognition ...................................................................................
Samsung PC Studio 3 ............................................................................
81
88
90
91
92
97
Fun & Tunes............................................................. 98
Ringtunes............................................................................................... 98
Images ................................................................................................. 100
Videos .................................................................................................. 101
Music ................................................................................................... 102
Other files............................................................................................. 104
Memory card........................................................................................ 104
Memory status ..................................................................................... 105
Samsung PC Studio 3 .......................................................................... 105
Contacts................................................................ 106
Storing a Number with a Name ............................................................
Contacts list .........................................................................................
Group...................................................................................................
Speed dial ............................................................................................
My name card ......................................................................................
Own number ........................................................................................
Management ........................................................................................
Service number....................................................................................
106
108
111
112
114
114
115
117
iii
T609.book Page iv Monday, April 17, 2006 10:30 PM
Samsung PC Studio 3 .......................................................................... 118
Settings................................................................. 119
Time & Date .........................................................................................
Phone settings .....................................................................................
Display settings....................................................................................
Sound settings .....................................................................................
Network services..................................................................................
Bluetooth..............................................................................................
Security................................................................................................
Connection settings .............................................................................
Voice recognition settings....................................................................
Reset settings ......................................................................................
119
120
122
124
127
132
133
136
138
139
Access Codes.......................................................... 141
Phone Password ..................................................................................
PIN.......................................................................................................
PUK......................................................................................................
PIN2.....................................................................................................
PUK2....................................................................................................
141
141
142
142
143
Solving Problems...................................................... 144
Health and Safety Information ...................................... 147
Exposure to Radio Frequency (RF) Signals ..........................................
For Body Operation ..............................................................................
Precautions When Using Batteries .......................................................
Operating Environment ........................................................................
Electronic Devices................................................................................
Potentially Explosive Environments......................................................
Emergency Calls...................................................................................
Other Important Safety Information .....................................................
Care and Maintenance..........................................................................
FCC Notice ...........................................................................................
Appendix A: CERTIFICATION INFORMATION (SAR).............................
Appendix B: Safe and Responsible Wireless Phone Use ......................
Appendix C: Consumer Update on Wireless Phones ............................
147
148
149
150
150
151
152
153
153
154
155
157
161
STANDARD LIMITED WARRANTY .................................... 170
Index .................................................................... 175
iv
T609.book Page 1 Monday, April 17, 2006 10:30 PM
Please read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service station) or near
fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them in an aircraft is
both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which could
affect their performance.
Special Regulations
Follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may
cause interference or danger (for example, in a hospital).
Important Safety Precautions
1
Important
Important Safety Precautions
T609.book Page 2 Monday, April 17, 2006 10:30 PM
Sensible Use
Use the phone only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is switched
on.
Emergency Call
Ensure the phone is switched on and in service. Key in the
emergency number for your present location, then press the
key.
You must deactivate any unnecessary features before you can make
an emergency call. Give all the necessary information as accurately
as possible. Do not end the call until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of any
unauthorized accessories could damage your phone and may be
dangerous.
Qualified Service
Only qualified service personnel may repair your phone.
For more detailed safety information, see “Health and Safety
Information” on page 147.
Important Safety Precautions
2
T609.book Page 3 Monday, April 17, 2006 10:30 PM
Your Phone
Features of Your Phone
Phone Layout
The following illustrations show the main elements of your phone:
1. Digital Camera/Camcorder
2. External Display
Your Phone
3
Your Phone
Your phone is lightweight, easy-to-use and offers many exciting
features. The following list outlines a few of the features included in
your phone.
♦1.3 Megapixel camera and camcorder
♦Bluetooth® wireless technology
♦Instant Messaging capability
♦Voice recognition capability
♦Multimedia capability capable of playing MP3s, downloaded
ringtunes and videos
♦Micro SD memory card slot for additional storage
♦Games that you can download and play
♦Useful Applications such as the file manager, alarms, calendar, task
list, calculator, world time, converter, timer, and stopwatch.
T609.book Page 4 Monday, April 17, 2006 10:30 PM
20. Earpiece
19. Display
18. External Speakers
17. Navigation
(Up/Down/Left/Right) keys
3. Soft key (right)
16. Camera/Camcorder key
15. Internet key
14. Power On/Off/End key
3. Soft key (left)
4. Headset jack
5. Send key
6. Launches voice mail
7. Volume key
13. Cancel/Correct key
12. Micro SD memory card slot
11. Alphanumeric keys.
8. Special function keys
10. Microphone
9. Battery charger/USB cable port
Keys
The following list correlates to the illustrations.
1. The built-in Digital Camera/Camcorder has video capture
capabilities
2. The External Display shows the received signal strength, the
phone battery level, the date, and the time.
3. The Soft keys (left/right) performs the functions indicated by the
screen text on the bottom line of the display.
4. The Headset jack is used for the hands-free headset.
5. The Send key makes or answers a call.
Your Phone
4
T609.book Page 5 Monday, April 17, 2006 10:30 PM
In Idle mode, the Talk key recalls the last number dialed or
received when held down.
6. In Idle mode, the 1 key accesses voice mail when held down.
7. During a call, the Volume key adjusts the speaker or headset
volume.
8. The * key enters special characters and performs various
functions.
9. Plug your battery charger cable or your USB cable here.
10. The Microphone is used during phone calls and voice note
recordings.
11. The Alphanumeric keys enter numbers, letters, and some special
characters.
12. Micro SD memory card slot. This expansion slot allows you to
insert a micro SD memory card to add additional memory and
storage capacity.
13. The Cancel key deletes characters from the display.
In Menu mode, it returns you to the previous menu level.
14. The End key hangs up the phone to end a call. The end key also
switches the phone on and off when held down.
In Menu mode, the end key cancels your input and returns the
phone to Idle mode.
15. In Idle mode, the Internet key launches the WAP (Wireless
Application Protocol) browser.
Your Phone
5
Your Phone
In Idle mode with the phone open, the volume key adjusts the
ring volume. With the phone closed, turns on the external
display when held down.
T609.book Page 6 Monday, April 17, 2006 10:30 PM
In Menu mode, the Internet key selects the highlighted menu
options.
When the Left soft key shows Options, the Internet key selects
the first option in the options list.
16. The side Camera/Camcorder key is used to launch the camera/
camcorder with a press and hold.
17. In Menu mode, the Navigation keys scroll through the menus
and Phonebook.
In Idle mode:
♦Down key: allows you to access the Contacts list menu directly.
♦Up key: allows you to access the MP3 Player directly.
♦Left key: allows you to access the Recent calls menu directly.
♦Right key: allows you to access the Create Text message
directly.
When entering text, moves the cursor to the left or right,
depending on which side you press.
18. External speakers allow you to hear sounds and music.
19. The Display shows the time and date, messages and numbers, as
well as the current function of the left and right soft keys.
20. The Earpiece is used to listen to audio from your phone.
Your Phone
6
T609.book Page 7 Monday, April 17, 2006 10:30 PM
Display
Display Layout
The display has the following areas:
Your Phone
Area
Description
Icons
Displays various icons. See page 7.
Text and
graphics area
Displays messages, instructions and any
information that you enter, such as the number you
are dialing.
Soft key
indicators
Shows the current functions assigned to the two
soft keys.
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
TF
Appears when a micro SD memory card has been inserted.
Your Phone
7
T609.book Page 8 Monday, April 17, 2006 10:30 PM
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified time.
For details, see “Alarm” on page 69.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page “Call forwarding” on page 128.
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
X
Appears when Silent Mode is active.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Appears when Bluetooth wireless technology is active.
Appears when the Internet browser is active.
Backlight
The backlight illuminates the display and the keypad. When you press
any key or open the phone, the backlight turns on and remains on for
a given period of time, depending on your setting in the Back Light
menu (Menu 9.3.6). When no keys are pressed, the display dims and
turns off after a specified length of time to conserve your battery
power.
♦To specify the length of time the backlight is active, use the
Backlight menu (Menu 9.3.6). See “Backlight” on page 123 for
further details.
Your Phone
8
T609.book Page 9 Monday, April 17, 2006 10:30 PM
External Display
Camera
The embedded camera on the front of your phone allows you to take
a photo or record a video while on the move. For further details
about the Camera feature, see page 81.
Memory Card
Your phone allows you to use a micro SD card and an adapter to
expand the phone’s available memory space. This memory card and
adapter enables images, music, and voice data to quickly and easily
be exchanged between SD-compatible devices. For more
information, see “Transferring Files via your TransFlash card” on
page 36.
Your Phone
9
Your Phone
Your phone has an external LCD display on the folder. It indicates
when you have an incoming call or a message. The external display
can alert you to alarms you have set by flashing at the specified time
and displaying the corresponding icon.
♦To turn the display on with the folder closed, press and hold one
of the Volume keys on the left side of the phone. You can also take
photos when the phone is closed by using the external display.
Press the Camera key on the right side of the phone. For further
details, see “Taking a Photo with the Folder Closed” on page 84
T609.book Page 10 Monday, April 17, 2006 10:30 PM
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details, such as your
PIN, any optional services, and other information.
Warning! The plug-in SIM card and its contacts can be easily damaged by scratching or
bending, so be careful when handling, inserting, or removing the card. Keep all SIM
cards out of the reach of small children.
If necessary, switch off the phone by holding down the
the power-off image displays.
key until
1. Remove the battery cover. To do so, press the ridged area on the
battery cover using your thumb (1) and gently slide it in the
direction of the arrow (2). Remove the battery cover.
2. Grasp the top of the battery with your finger and lift up in the
direction of the arrow (1). Remove the battery.
Getting Started
10
T609.book Page 11 Monday, April 17, 2006 10:30 PM
Note: If you need to remove the SIM card, slide it, as shown, and take it out of the socket.
Getting Started
11
Getting Started
3. Slide the SIM card into the SIM card socket so that the card
locks into place. Make sure the gold contacts of the card face
into the phone.
T609.book Page 12 Monday, April 17, 2006 10:30 PM
4. Place the battery so that the 3 brass tabs on the end align with the
3 brass prongs at the bottom of the battery compartment (1).
Press the battery down until it clicks into place (2).
5. Replace the battery cover. Make sure that the battery is properly
installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel
adapter comes with your phone for charging the battery. Use only
approved batteries and chargers. Ask your local Samsung dealer for
further details.
Getting Started
12
T609.book Page 13 Monday, April 17, 2006 10:30 PM
You can use the phone while the battery is charging, but this causes
the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the first time. A
discharged battery recharges fully in approximately 2 hours.
2. Plug the adapter into a standard AC wall outlet.
Note: For connection to an electrical supply not located in Canada or the U.S.A, you must
use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter
could damage your phone and void your warranty.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain,
a warning tone sounds and a message repeats at regular intervals on
the display. If this happens, the display dims to conserve the
remaining battery power.
When the battery level becomes too low, the phone automatically
turns off.
Check the battery indicator icon periodically and recharge as needed
to make sure the phone has enough battery power when needed.
Getting Started
13
Getting Started
1. With the battery in position in the phone, plug the connector of
the travel adapter into the jack at the bottom of the phone.
T609.book Page 14 Monday, April 17, 2006 10:30 PM
Switching the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter the
password and press the OK soft key. It is preset to “00000000” at
the factory. For further details, see “Change password” on
page 134.
4. If the phone asks for a PIN, enter the PIN and press the OK soft
key. For further details, see “PIN Check” on page 133.
The phone searches for your network and, after finding it, the idle
screen appears on the display. You can now make or receive a call.
The display language is preset to Automatic and is dependent on the
setting in the SIM as determined by your service provider. To change
the language, use the Language menu (Menu 9.2.1). For further
details, see “Language” on page 120.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Getting Started
14
T609.book Page 15 Monday, April 17, 2006 10:30 PM
Call Functions
Selecting Functions and Options
The roles of the soft keys vary depending on the function you are
currently using. The labels on the bottom line of the display just
above each key indicate their current role.
Menu
Press the Left soft key
for Menu mode.
The Left soft key
Mall
Press the Right soft
key to access the
Mall menu.
can be used in several different ways.
♦In Idle mode, press to access the Menu.
♦When using other features, such as the web browser, the left soft
♦Some submenus display
to the right of an option, indicating
additional sub-options. Highlight the option and press either the
Right navigation key or the
key to display the sub-options.
The Right soft key
can also be used in several different ways.
♦In Idle mode, press to access the Mall. (See “Rogers Mall” on
page 77.)
♦In text entry mode, press to change the character input type.
♦When using other features, such as the web browser, the right soft
key performs a context-sensitive action. This action is shown in the
bottom right corner of the Display Screen.
Call Functions
15
Call Functions
key performs a context-sensitive action. This action is shown in
the bottom left corner of the Display Screen.
T609.book Page 16 Monday, April 17, 2006 10:30 PM
♦Some submenus display
to the right of an option, indicating
additional sub-options. Highlight the option and press either the
Right navigation key or the
key to display the sub-options.
To
Press the
move up one level in the
menu tree
or Back soft key.
exit without changing the
settings
key.
select the displayed
function displayed or
option
Select soft key
view the next function or
highlight the next option
on a list
Down key or the volume key on the
left side of the phone.
move to the previous
function or option on a list
volume key on the
Up key or the
left side of the phone.
In some functions, you may be asked for a password or PIN.
Enter the code and press the OK soft key.
Note: When you access a list of options, your phone highlights the current option. If,
however, there are only two options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active so that you can select it directly.
Making a Call
When the idle screen displays, enter the area code and phone
number, then press the
key.
Call Functions
16
T609.book Page 17 Monday, April 17, 2006 10:30 PM
Note: When you activate the Auto redial option in the Extra settings menu (Menu
9.2.4), the phone automatically redials up to ten times when the person does not answer
the call or is already on the phone. For carriers that automatically divert unanswered call
to voice mail, the Auto Redial feature will not provide useful service. See “Extra settings”
on page 121 for further details.
Making an International Call
1. Press and hold the 0 key. The + character appears.
2. Enter the country code, area code and phone number and press
the
key.
Correcting the Number
To clear
the last digit
displayed
any other digit in the
number
Press the
key.
Left or Right key until the cursor is immediately
to the right of the digit to be cleared. Press the
key. You can also insert a missing digit
simply by pressing the appropriate key.
key and hold it for more than one second.
Ending a Call
When you want to end your call, briefly press the
the phone.
key or close
Redialling the Last Number
The phone stores the numbers you have dialed, received or missed if
the caller is identified. See “Recent calls” on page 49 for further
details.
Call Functions
17
Call Functions
the whole display
T609.book Page 18 Monday, April 17, 2006 10:30 PM
To recall any of these numbers:
1. If you have typed characters on the display, press either the Exit
soft key or the
key to return to Idle mode.
2. Press the
key to display your Recent calls. By default, the All
Calls list is displayed, showing all numbers made, received or
missed.
3. Use the Up and Down keys to scroll through the numbers until
the number you want is highlighted.
To
dial the number
Press the
key.
edit the number
Options soft key and select Call back.
The number is displayed For further
details, see “Correcting the Number” on
page 17.
delete the number
Options soft key and select Delete
followed by Selected.
delete all of the
numbers in the Recent
calls list
Options soft key and select Delete
followed by All. For further details, see
“Delete all” on page 51.
Making a Call from Contacts list
You can store the phone numbers that you use regularly in the SIM
card or the phone’s memory, which are collectively called Contacts
list. Simply select a name to recall the associated number. For further
details, see “Contacts” on page 106.
Call Functions
18
T609.book Page 19 Monday, April 17, 2006 10:30 PM
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
♦Press the key to increase the volume level and the key to
decrease the level.
♦In Idle mode, you can also adjust the ring volume by using these
keys.
Answering a Call
When somebody calls you, the phone rings and displays the
incoming call image. When the caller can be identified, the caller’s
phone number or name, if stored in your Contacts list, displays.
1. If necessary, open the phone.
2. Press the
call.
key or the Accept soft key to answer the incoming
♦When the Anykey answer option in the Extra settings menu
(Menu 9.2.4) is activated, you can press any key to answer a
call except for the
key and the Reject soft key. See “Extra
settings” on page 121.
Call Functions
19
Call Functions
To answer a call
T609.book Page 20 Monday, April 17, 2006 10:30 PM
♦When the Open to answer option in the Extra settings menu
(Menu 9.2.4) is activated, you can answer the call simply by
opening the folder.
♦To reject the call, press and hold one of the Volume keys, or
press the Reject soft key or
key.
3. End the call by pressing the
key.
Note: You can answer a call while using the Contacts list or menu features. After ending
the call, the phone returns to the function screen you were using.
Viewing Missed Calls
When you are unable to answer a call, you can find out who called.
The number of calls you missed is displayed on the idle screen
immediately after a call is missed.
To view the missed call immediately:
1. If necessary, open the folder.
2. Press the View soft key.
The number for the most recent missed call displays, if available.
To
scroll through the missed
calls
call the number displayed
edit or delete a missed
call number
Call Functions
20
Press the
Up or Down key.
key.
Options soft key. See below.
T609.book Page 21 Monday, April 17, 2006 10:30 PM
Saving a Missed Call Number
Note: When the number for the missed call is not available, the Edit option does not
display.
1. Press the View soft key.
2. Press the Up or Down key to highlight the number you wish to
save and press the Options soft key.
3. Select Save as contacts and press the Select soft key.
4. Choose between the Phone and SIM locations and press the
Select soft key.
If you selected Phone, use the right and left keys to select the
phone category and press the Select soft key.
5. Enter the Name or choose from the provided list and press the
Save soft key.
For more options on this function, see “Storing a Number in Idle
Mode” on page 106.
Deleting a Missed Call
2. If necessary, press the Up or Down key to highlight the Delete
option.
3. Press the Select soft key.
You can press the
feature.
key at any time to exit the Missed Call
Note: You can access the Missed Call feature at any time by selecting the Missed Calls
menu (Menu 1.2). For further details, see “Missed calls” on page 49.
Call Functions
21
Call Functions
1. Press the Options soft key.
T609.book Page 22 Monday, April 17, 2006 10:30 PM
Silent Mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. In Silent mode, instead of
sounds, your phone will vibrate, or do nothing, depending on the
function and the situation.
1. In Idle mode, press and hold the
message and the Silent mode icon
key until the “Silent Mode”
is displayed.
2. To exit and reactivate the previous sound settings, press and hold
the
key again until “Exit silent mode” displays. The Silent
mode icon
is no longer displayed.
Notes:
♦Menu 9.4.4 Power On/Off vibration occurs only during power on.
♦Activating Silent mode does not turn off the camera’s shutter
sound.
Call Functions
22
T609.book Page 23 Monday, April 17, 2006 10:30 PM
Your phone provides a number of features that you can use during a
call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can
make another call while you have a call in progress if your network
supports this service.
♦To place a call on hold, simply press the Options soft key followed
by Hold call. You can reactivate the call whenever you want, by
pressing the Options soft key followed by End held call.
To make a call while you have a call in progress:
1. Put the current call on hold by pressing the Options soft key
followed by New call. Your current call is placed on hold.
2. Enter the phone number that you wish to dial.
3. Press the
key or the Dial soft key to dial the second call.
♦When you have an active call and another call on hold, you may
switch between the two calls, placing the active call on hold.
Simply press the Options soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the other
person.
4. When you want to finish, end each call by pressing the
key.
Using the Menu Functions
During a call, you can access the main menu functions.
1. Press the Options soft key.
2. Press the Up or Down key to scroll through the menu list.
Options During a Call
23
Options During a Call
Options During a Call
T609.book Page 24 Monday, April 17, 2006 10:30 PM
Note: You cannot use some menus during a call. They are deactivated on this list.
3. When the menu you want highlights, press the Select soft key.
4. If the selected menu has sub-options, repeat steps 3 and 4.
For further details about the menu functions available, see the “List of
Menu Functions” on page 41.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off so that the
other person on the call cannot hear you. For example, you wish to
say something to another person in the room but do not want the
person on the call to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. Highlight the Mute option.
3. Press the Select soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Unmute option.
3. Press the Select soft key.
The other person can hear you again.
Options During a Call
24
T609.book Page 25 Monday, April 17, 2006 10:30 PM
These options allow you to turn the key tones off or on. If the Mute
keys option is selected, your phone does not transmit the DTMF
(Dual Tone Multi-Frequency) tones of the keys, which allows you to
press keys without hearing annoying key tones during a call.
Note: To communicate with answering machines or computerized telephone systems
using DTMF tones, the Send DTMF option must be selected.
Sending a Sequence of DTMF Tones
You can send the DTMF tones after entering the entire number you
need to send. This option is helpful for entering a password or an
account number when you call an automated system, like a banking
service.
To send the DTMF tones:
1. When you are connected to the teleservice system, press the
Options soft key.
2. Press the Down key to highlight the Send DTMF option.
3. Press the Select soft key.
4. Enter the number you want to send and press the OK soft key. The
tones are sent.
Searching for a Number in the Contacts list
You can search for a number in the Contacts list during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Contacts option.
3. Press the Select soft key.
Options During a Call
25
Options During a Call
Muting or Sending Key Tones
T609.book Page 26 Monday, April 17, 2006 10:30 PM
The Contacts menu is displayed.
4. Press 1 for Contacts list and enter the name that you wish to
find.
If you enter the first few letters of the name, the Contacts list entries
are listed, starting with the first entry matching your input.
5. To view the highlighted entry, press the
key.
For further details about the Contacts list feature, see “Contacts” on
page 106.
Using Text Messages
If you receive a text message during a call, the Message icon ( )
flashes on the display. You can use the Text message menu (Menu
2.2.1) to write new text messages. For further details about text
messaging, refer to “Creating a Text Message” on page 54.
Call Waiting
You can answer an incoming call while you have a call in progress, if
your network supports this service and you have set the Call waiting
option (Menu 9.5.3) to Activate. For further details about call
waiting, see “Call waiting” on page 130.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the incoming
call. The first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key and
select Swap.
3. To end the call being held, press the Options soft key and select
the End held call option.
To end the current call, press the
Options During a Call
26
key.
T609.book Page 27 Monday, April 17, 2006 10:30 PM
A multi-party call is a network service that allows up to six people to
take part simultaneously in a multi-party or conference call.
Note: Please contact your service provider to determine if multi-party calling is
supported.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call is
automatically put on hold.
3. To join the first participant to the multi-party call, press the
Options soft key and select the Join option. Press the Select soft
key.
4. To add a new person to the multi-party call, call the person in the
normal way and press the Options soft key. Select the Join option
and press the Select soft key.
You can also add incoming callers by answering the call, pressing
the Options soft key, and selecting the Join option. Repeat as
required.
Having a Private Conversation with One Participant
1. Press the Options soft key and choose the Select one option.
Press the Select soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or Down key,
and press the Options soft key or the
key.
3. Select either Split or Remove, and press the OK soft key.
Options During a Call
27
Options During a Call
Making a Multi-party Call
T609.book Page 28 Monday, April 17, 2006 10:30 PM
You can now talk privately to that person. The other participants can
still converse with each other.
4. To return to the multi-party call, press the Options soft key and
select the Join option. Press the OK soft key.
All the multi-party call participants can now hear each other.
Dropping One Participant
1. Press the Options soft key and choose the Select One option.
Press the Select soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or Down key,
and press the Options soft key or the
key.
3. Press the Down key to select the Remove option and press the OK
soft key.
The call ends with that participant, but you can continue to talk to the
others.
4. When you want to end the multi-party call, press the
Options During a Call
28
key.
T609.book Page 29 Monday, April 17, 2006 10:30 PM
Entering Text
Changing the Text Input Mode
When you are in a field that allows characters to be entered, you will
notice the text input mode indicator on the display.
Example: Writing a text message
Entering Text
29
Entering Text
When using your phone, you will often need to enter text, such as
when storing a name in the Contacts list, creating your personal
greeting or scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes:
♦T9 mode: This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, when you press the 5 key once, J, K or L
displays. T9 mode automatically compares your keystrokes with
an internal linguistic dictionary to determine the correct word,
thus requiring far fewer keystrokes than the traditional Alphabet
mode.
♦Alphabet mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. Press the key once, twice,
three or four times until the desired character displays.
♦Number mode: this mode allows you to enter numbers.
♦Symbol mode: this mode allows you to enter various symbols and
special characters.
T609.book Page 30 Monday, April 17, 2006 10:30 PM
To select
Press the right soft key until
T9 mode
T9 Eng
displays. See page 30.
Alphabet mode
A Eng
displays. See page 31.
Number mode
1 Eng
displays. See page 33.
Symbol mode
Eng
displays. See page 33.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in any
character using a single keystroke. This text input mode is based on a
built-in dictionary. Your phone will select the most likely word based
on your keystroke combinations.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by pressing the 2
to 9 keys. Press each key only once for each letter.
Example: To enter “HELLO” in T9 mode, press the 4, 3, 5, 5 and 6
keys.
The word that you are typing appears on the display. It may change
with each key that you press.
2. Enter the whole word before editing or deleting the keystrokes.
3. When the word displays correctly, go to step 4.
If the word displayed is not the one you want, press the 0 key or the
Up or Down key repeatedly to display alternative word choices for the
keys that you have pressed.
Entering Text
30
T609.book Page 31 Monday, April 17, 2006 10:30 PM
4. Insert a space by pressing the
word.
key and start entering the next
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you want to
add, press the 0 or Down key to display the alternative words.
3. If necessary, clear the word using
and enter the word you
want using Alphabet mode. See page 31.
4. Press the OK soft key.
The word is added to the T9 dictionary and becomes the first word
for the associated key presses.
♦To enter periods, hyphens or apostrophes, press the 1 key. T9
mode applies grammar rules to ensure that the correct punctuation
is used.
♦To shift the case in T9 mode, use the key. There are three cases;
Initial Capital ( ), Capital lock ( ) and Lower case (no image).
♦You can move the cursor by using the Left and Right keys. To
delete letters, press
. Press and hold
to clear the display.
Using Alphabet Mode
Use the 0 to 9 keys to enter your text.
1. Press the keys labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
Entering Text
31
Entering Text
2. When you press the 0 or Down key on the last alternative word,
the display shows Add on the bottom line. Press the Add soft
key.
T609.book Page 32 Monday, April 17, 2006 10:30 PM
Note: The cursor moves to the right when you press a different key. When entering the
same letter twice or a different letter on the same key, just wait for a few seconds for the
cursor to move to the right automatically, and then select the next letter.
Refer to the table below for further details about the characters
available:
Characters in the Order Displayed
Key
Upper Case
Lower Case
( )
( )
space
space
€
0
space
€
0
space
♦To shift the case in Alphabet mode, use the
key. There are three
cases; Capital lock ( ), Lower case (no image) and Initial Capital
( ).
♦You can move the cursor by using the Left and Right keys. To
delete letters, press
. Press and hold
to clear the display.
Entering Text
32
T609.book Page 33 Monday, April 17, 2006 10:30 PM
Using Number Mode
Number mode enables you to enter numbers into a text message.
Press the keys corresponding to the digits you want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text message.
To
Press the
corresponding number key.
display more symbols
Up or Down key.
clear the symbol(s)
. When the input field is empty,
this key returns the screen to the
previous mode.
insert the symbol(s) into
your message
OK soft key.
cancel your input and
return to the previous
mode
soft key.
Entering Text
33
Entering Text
select a symbol
T609.book Page 34 Monday, April 17, 2006 10:30 PM
File Transfers between your Phone
and PC
You can transfer songs and other files such as pictures, video clips,
or Personal Information Management (PIM) files between your
phone and personal computer in several different ways, including:
♦using the USB cable provided with your phone
♦using the phone’s Bluetooth feature
♦using the TransFlash card reader
♦downloaded over the wireless Internet
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to manage your Contacts, transfer messages, music and
other files between your phone and a computer.
Note: For more information on the Samsung PC Studio 3, consult the online help
provided with the PC Studio 3 software.
Transferring files over the USB cable
Using PC Studio 3, you can transfer files such as mp3s from your
computer to your phone over a USB cable.
1. Install the Samsung PC Studio 3 software (provided with you
phone) on your PC.
2. Connect the USB cable to a USB port on your PC and to your
phone.
3. Start the PC Studio 3 software.
4. Select Manage Files. The Phone Explorer window appears. Your
phone’s folders are displayed in the top left part of the window
and your computer’s folders are displayed in the bottom left part
of the window.
File Transfers between your Phone and PC
34
T609.book Page 35 Monday, April 17, 2006 10:30 PM
5. Using the Phone Explorer, navigate to the folder(s) containing the
files you wish to transfer. You can drag and drop files between
your computer’s and your phone’s folders.
Note: When transferring mp3 files onto your phone place them in the Music folder on
your phone.
Note: Files transferred from the computer are stored in your phone’s memory. If desired,
you can transfer them from the phone’s memory to a TransFlash card.
Transferring Files via Bluetooth
2. Start the PC Studio 3 software.
3. Select Manage Files. The Phone Explorer window appears.
4. From the Menu bar, select File>Connection. Select Bluetooth. If
you do not have a Bluetooth connection established, follow the
on-screen instructions to create your connection.
Note: To receive data via Bluetooth, your phone’s Bluetooth feature must be active. For
more information on activating Bluetooth on your phone, see “Turn Bluetooth On/Off” on
page 132.
5. Using the Phone Explorer, navigate to the folder(s) containing the
files you wish to transfer. You can drag and drop files between
your computer’s and your phone’s folders.
Note: When transferring mp3 files onto your phone place them in the Music folder on
your phone.
File Transfers between your Phone and PC
35
File Transfers
1. Install the Samsung PC Studio 3 software (provided with you
phone) on a Bluetooth-enabled PC.
T609.book Page 36 Monday, April 17, 2006 10:30 PM
Note: Files transferred from the computer are stored in your phone’s memory. If desired,
you can transfer them from the phone’s memory to a TransFlash card.
Transferring Files via your TransFlash card
Your phone is equipped with a 32 MB TransFlash (Secure Digital)
memory card and its adapter to expand the phone’s available
memory space. It allows you to easily store images, videos, music
files, voice data and other files in your phone.
Note: Before using your TransFlash memory card, it must be formatted with a FAT32 file
system. Please check the documentation that comes with your memory card before
using it with your handset.
Inserting the TransFlash Memory Card
To insert the TransFlash memory card into your phone:
1. Open the TransFlash access panel located on the bottom-right
side of the phone.
2. Position the TransFlash card perpendicular to the opening and
gently slide it into place until it is fully inserted and locked. Ensure
that the TransFlash card is locked in place before replacing the
protective cover.
If this is the first time that the TransFlash card is inserted into
your phone, your phone will create folders for Music, Sounds,
Images, etc.
Note: Be sure to use only recommended memory cards (8 MB – 512 MB). Using nonrecommended memory cards could cause data loss and damage your phone
File Transfers between your Phone and PC
36
T609.book Page 37 Monday, April 17, 2006 10:30 PM
TransFlash Memory Icon Indicators
The following icons will appear on your phone’s display screen when
a TransFlash memory card is properly inserted into the TransFlash
memory card slot:
Indicates that a TransFlash memory card has been inserted
into your handset.
Note: Make sure your battery is fully charged before using the TransFlash memory card.
Your data may become damaged or unusable if the battery runs out while reading or
writing to the TransFlash memory card.
Transferring music via your TransFlash card
1. Insert the TransFlash card into your PC’s card reader. For more
information on how to insert a TransFlash card into an SDcompatible reader, see “Using the TransFlash SD Adapter” on
page 38.
2. If the card has not previously been inserted into your phone,
create a Folder on your TransFlash card called “Music”.
Note: When you insert your TransFlash card into your phone, the Music folder is
automatically created.
3. Copy your music files to the Music folder on the TransFlash card.
4. When you are finished copying the files, transfer the TransFlash
card to your phone.
Note: Samsung recommends to use PC Studio 3 for transferring file and music.
File Transfers between your Phone and PC
37
File Transfers
You can copy music, and other files from your PC directly to your
TransFlash card.
T609.book Page 38 Monday, April 17, 2006 10:30 PM
Removing the TransFlash Memory Card
To remove the TransFlash memory card from your phone:
1. Open the TransFlash access panel located on the bottomright side of the phone.
2. Eject the TransFlash card by pushing it in and then
releasing.
3. Pull the TransFlash memory card out of the handset..
Warning: DO NOT remove a TransFlash memory card while files are
being accessed or transferred. It could result in loss or damage of
data.
Note: If you remove your memory card, the location to save images will automatically
default back to In Phone.
Using the TransFlash SD Adapter
The supplied TransFlash memory adapter allows TransFlash memory
cards to be used in SD-compatible devices. Before using it with your
SD card reader, you will need to insert the TransFlash memory card
into the TransFlash memory adapter.
To insert the TransFlash memory card into the TransFlash memory
adapter:
♦With the label side of the TransFlash memory card facing up,
insert the card into the supplied TransFlash memory adapter
and gently slide the card until it is fully inserted.
File Transfers between your Phone and PC
38
T609.book Page 39 Monday, April 17, 2006 10:30 PM
To remove the TransFlash memory card from the TransFlash memory
adapter:
♦Hold the front edge of the TransFlash memory card and gently
pull outward to remove it from the adapter.
File Transfers
File Transfers between your Phone and PC
39
T609.book Page 40 Monday, April 17, 2006 10:30 PM
Menus
The navigation key on your phone allows you to scroll through
menus quickly and easily. The scroll bar at the right of the menu
keeps track of your position in the menu at all times.
♦To navigate through a menu, simply press the navigation key up or
down. If you are in a first-level menu, such as Settings, you may
also navigate to the next menu by pressing the navigation key left
or right.
♦As you navigate through the menu, menu options are highlighted.
Select any numbered option by simply pressing the corresponding
number on the phone’s keypad. You may also select any item by
highlighting it and pressing the Select soft key or the
key.
♦Some submenus display
to the right of an option, indicating
additional sub-options. Highlight the option and press either the
Right navigation key or the
key to display the sub-options.
Accessing a Menu Function
1. In Idle mode, press the Menu soft key to access Menu mode.
From the Menu, do one of the following:
♦Scroll using the Up, Down, Left and Right keys to reach a main
menu, Settings for example. Press the Select soft key or the
key to enter the menu.
♦Press the number key beside the desired menu option. For
example, for Settings, press 9.
2. If the menu contains sub-menus, Language for example, you can
access them by scrolling using the Up or Down key and pressing
the Select soft key or the
key. Alternatively, press the number
beside the desired sub-menu option.
If the menu that you have selected contains further options,
repeat this step.
Menus
40
T609.book Page 41 Monday, April 17, 2006 10:30 PM
To
Press the
scroll through the menus
Up or Down key, or use the Volume
keys.
confirm the chosen
setting
Select soft key or
return to the previous
menu level
or Back soft key.
exit the menu without
changing the settings
key.
key.
List of Menu Functions
The following list shows the menu structure available and indicates
the number assigned to each option and the page where you can find
a description of each feature.
Note: If you use a SIM AT card that provides additional services, the Rogers
Applications menu displays when you press Menu 4 for Applications. For further
details, see your SIM card instructions.
1.
All calls
2.
Missed calls
3.
Calls made
4.
Calls received
5.
Delete all
Menus
1. Recent calls
(see page 49)
• All calls
• Missed calls
• Calls made
• Calls received
6.
Call time
Menus
41
T609.book Page 42 Monday, April 17, 2006 10:30 PM
2. Messages
1.
(see page 53)
Instant Messaging
1. Sign in
2. Saved convers./conversations
3. Offline convers./conversations
• Rogers MMS
• Rogers Internet
3.Community settings
• Sounds/Sound settings
• Sorting
• By alphabet/
4. Preferences/Settings (see below for
Alphabet
expanded menu tree)
5. Help
1.Service provider info.
2.About MSN messenger/Help
text
2.
Create new message
1. Text message
2. Multimedia message
3.
My messages
1. Inbox
Voice mail
• Reply path
• Delivery report
• Bearer selection
• GSM
1.Setting 1
• Service center
1. Call voice mail
2. Voice mail number
6.
1.Send settings
3.Profile settings
4. Drafts
5.
sign in
2. Text Message
2.Current profile
3. Outbox
Templates
• Automatic sign-in/Auto-
• GPRS preferred
2. Sentbox
4.
• By status/Status
Delete all
• Destination
address
• Default type
•Text
• All messages
• Fax
• Inbox
• Email
• Read
• Unread
• Sentbox
• Paging
• Validity period
•Maximum
• Outbox
•One hour
• Drafts
7.
•6 hours
Settings
•24 hours
1. IM
1.Choose your community
• MSN Messenger
• Yahoo!
2.Profile settings
• GoRogers
Menus
42
•One week
• Setting name
3. Multimedia Message
1.Send settings
• Delivery report
• Read reply
T609.book Page 43 Monday, April 17, 2006 10:30 PM
• Priority
• Index
• Normal
3. Language
• HIgh
• All
• Low
• English
• Expiry date
• Maximum
• Français
9.
Memory status
• 1 hour
• 6 hour
• 24 hour
• 1 week
• Delivery time
3. Games
(see page 67)
1.
Get Games
2.
My games
• Immediately
• 1 hour later
4. Applications
• 6 hour later
page 69)
• 12 hour later
1.
• Wake-up call
• 3 day later
• Alarm1
• 1 week later
• Alarm2
2.Retrieve settings
• Auto power
2.
Calendar
• Anonymous reject
1. Month view
• Ads allowed
2. Week view
• Report allowed
3. Day view
3.Profile
5. Anniversary
• Rogers MMS
6. Miscellaneous
• Rogers Internet
7. Missed alarm events
• Receive
8. Memory status
3.
Task
• Always
4.
Calculator
• SMS-C specific
5.
Converter
• Never
1. Currency
• Service center
2. Length
Broadcast message
3. Weight
1. Receive
4. Volume
• Off
5. Area
• On
2. Channel
• All channels
Menus
4. Schedule
• GoRogers
4. Push Message
8.
Alarm
• 24 hour later
• 1 month later
(see
6. Temperature
6.
Timer
7.
Stopwatch
Menus
43
T609.book Page 44 Monday, April 17, 2006 10:30 PM
8.
4. Memory card*
World time
3.
5. Rogers Mall
Get Ring tunes
2.
Get Music
3.
Get Games
4.
Get Graphics
5.
Get Video
6.
Get Celebrity Voicemail
4. Memory card*
4.
Music
1. My music
2. Memory card*
Get My Pix - Online Album
8.
Navigate Home
1.
2. Downloaded videos
3. My videos
7.
6. Media
1. Get Videos
(see page 77)
1.
Videos
5.
Other files
1. Other files
2. Memory card*
(see page 81)
6.
Memory card*
7.
Memory status
Camera
1. Phone
1. Take picture
2. Memory card
2. Record video
8. Contacts
3. My photos
4. My videos
5. View Online Album
2.
MP3 Player
3.
Record audio
4.
Rogers Music Store
5.
Voice recognition
7. Fun & Tunes
Contacts list
2.
Add new contact
1. Phone
2. SIM/SIM(FDN)
3.
(see
Speed dial
5.
My name card
6.
Own number
1. Number 1
Ringtunes
2. Number 2
1. Get Ring tunes
3. Number 3
4. Number 4
2. My sounds
3. Voice list
4. Memory card*
2.
Group
4.
page 98)
1.
(see page 106)
1.
7.
Management
1. Default saving
Images
• Phone
1. Get Graphics
• SIM card
2. My downloads
3. My photos
• Ask on saving
2. Copy all to phone
3. Sort by contacts
*. when memory card is
inserted
Menus
44
• First name
T609.book Page 45 Monday, April 17, 2006 10:30 PM
• Last name
4. Delete all
• Open to answer
3.
• All
Display settings
1. Wallpaper
• Phone
1.Get more wallpaper
• SIM
2.Default wallpapers
• SIM (FDN)
• Car
5. Memory status
• Feather
• Flower
9. Settings
1.
• Green Apple
(see page 119)
• Pond
Time & Date
• Snowboarding
• Set time
• Soccer
• AM/PM
• The Road
• AM
• PM
• Time format
• 12 hours
• 24 hours
• Zen Style
3.My downloads
4.My photos
2. Info display
• Text style
• Set date
• Outline
• Date format
• Shadow
• MM/DD/YYYY
• DD/MM/YYYY
• Normal
• Text color
• YYYY/MM/DD
• White
• Auto update
• Blue
• On
• Green
• Confirm first
2.
• Red
Phone settings
1. Language
• English
• Français
• Automatic
2. Greeting message
3. Volume key
• Mute
• Reject
4. Extra settings
• Auto redial
• Anykey answer
Menus
• Yellow
• Off
• Black
3. Interior display
• Pattern 1
• Pattern 2
4. LCD brightness control
5. Front LCD contrast control
6. Backlight
• On
• 15 sec.
• 30 sec.
• 1 min.
• 3 min.
Menus
45
T609.book Page 46 Monday, April 17, 2006 10:30 PM
• 10 min.
• Melody
• Dim
• Vibration
• 15 sec.
• Vibration then
• 30 sec.
melody
• 1 min.
• Off
• 3 min.
• Repetition
• Off
• Once
7. Dialing display
• Every 1 min.
1.Font size
• Every 2 min.
• Large
2.Multimedia message (same
• Medium
options as Text message,
• Small
above)
2.Font color
3.Broadcast (same options as
• Basic
Text Message, above)
• Rainbow
4. Power on/off
• Monochrome
• Off
3.Background color
4.
• Tone 1
Sound settings
• Tone 2
1. Incoming call
5. Folder tone
• Get Ring tunes
• Off
• Ringtone
• Tone 1
• Volume
• Tone 2
• Alert type
• Tone 3
• Melody
• Tone 4
• Vibration
6. Silent mode
• Vibration then melody
• Vibration
2. Keypad tone
• Mute
• On/Off
7. Extra tones
• Keytone
• Minute minder
• DTMF
• Connection tone
• Beep
• Voice
• Simple
• Xylophone
• Volume
3. Message tone
1.Text message
Menus
46
• Alerts on call
5.
Network services
1. Call forwarding
1.Forward always
1.Voice calls
2.Data calls
2.Busy
• Tone
1.Voice calls
• Alert type
2.Data calls
T609.book Page 47 Monday, April 17, 2006 10:30 PM
3.No reply
• Default
1.Voice calls
• Hide number
2.Data calls
4.Unreachable
• Send number
6.
1.Voice calls
1. Turn Bluetooth On/Off
2.Data calls
• Off
5.Cancel all
• On
2. Call barring
2. My devices
1.All outgoing
3. My phone’s visibility
1.Voice calls
• Off
2.Data calls
• On
2.International
4. My phone’s name
1.Voice calls
5. Security modes
2.Data calls
• Off
3.International except to home
• On
1.Voice calls
6. Bluetooth Services
2.Data calls
1.Headset
4.All receiving
2.Handsfree
1.Voice calls
3.Serial port
2.Data calls
4.Dial up networking
5.Incoming while abroad
5.File transfer
1.Voice calls
2.Data calls
7.Change barring password
3. Call waiting
1.Voice calls
• Activate
• Deactivate
2.Data calls
6.Object push
7.
Security
1. PIN Check
• Disable
• Enable
2. Change PIN
3. Phone lock
• Disable
• Enable
• Activate
4. Change password
• Deactivate
5. Privacy
3.Cancel all
4. Network selection
1.Search now
2.Default setup
• Automatic
• Manual
Menus
6.Cancel all
5. Caller ID
Bluetooth
• Disable
• Enable
6. SIM lock
• Disable
• Enable
7. FDN mode
• Disable
Menus
47
T609.book Page 48 Monday, April 17, 2006 10:30 PM
• Enable
• Off
8. Change PIN2
8.
9.
5. About
Connection settings
10. Reset settings
•
GoRogers
• All
•
Rogers MMS
• Phone settings
•
Rogers Internet
• Display settings
Voice recognition settings
1. Choice lists
• Automatic
• Always On
• Always Off
2. Sensititivity
• Reject More
• Recommended
• Reject Less
3. Digit dialing
1.Adapt digits
2.Reset digits
4. Sound
1.Prompts
• On
• Off
2.Digits
• On
• Off
3.Names
• On
• Off
4.Name settings
1.Speed
• Faster
• Recommended
• Slower
2.Volume
• Louder
• Recommended
• Softer
5.Speakerphone
• On
Menus
48
• Sound settings
T609.book Page 49 Monday, April 17, 2006 10:30 PM
Recent calls
In this menu, you can:
♦view calls you missed, received or dialed
♦view the length of calls made and received
Note: You can access the most recent numbers in the three types of call records by
pressing the
key in Idle mode.
All calls
This menu (Menu 1.1) lets you view the last 90 numbers you dialed,
received or missed. Use the navigation key to scroll through the list,
and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦call the number back. You can also dial the number by pressing
the
key.
♦save the number to your Contacts list.
♦send a message to the number.
♦delete the call from the list.
Missed calls
Recent calls
49
Recent calls
This menu (Menu 1.2)lets you view the last 30 numbers of the calls
you received, but did not answer. Use the navigation key to scroll
through the list, and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦call the number back. You can also dial the number by pressing
the
key.
♦save the number to your Contacts list.
T609.book Page 50 Monday, April 17, 2006 10:30 PM
♦send a message to the number.
♦delete the call from the list.
Calls made
This menu (Menu 1.3) lets you view the last 30 numbers you dialed.
Use the navigation key to scroll through the list, and press the
key
to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦call the number back. You can also dial the number by pressing
the
key.
♦save the number to your Contacts list.
♦send a message to the number.
♦delete the call from the list.
Calls received
This menu (Menu 1.4) lets you view the last 30 numbers you dialed,
received or missed. Use the navigation key to scroll through the list,
and press the
key to view call details.
The number is displayed along with the time and date when the call
was made.
By pressing the Options soft key, you can:
♦call the number back. You can also dial the number by pressing
the
key.
♦save the number to your Contacts list.
♦send a message to the number.
♦delete the call from the list.
Recent calls
50
T609.book Page 51 Monday, April 17, 2006 10:30 PM
Delete all
This menu (Menu 1.5) allows you to delete all of the records in each
call record type. You can also delete all of your call records at one
time.
To
select a call record type
to clear
add or remove a check
mark
delete the marked
records
Press the
Up or Down key. To delete all of your call
records, select All Calls.
key.
Delete soft key.
When a confirming message displays, press the Yes soft key to
confirm.
Call time
This menu (Menu 1.6) lets you view the timers for calls you made
and received.
Note: The actual time invoiced for calls by your service provider may vary, depending on
network features, rounding-off for billing purposes and so on.
Recent calls
51
Recent calls
The following timers are available:
♦Last call time: length of the last call.
♦Total sent: total length of all calls you made since the timer was
last reset.
♦Total received: total length of all calls you received since the
timer was last reset.
T609.book Page 52 Monday, April 17, 2006 10:30 PM
To reset a timer, highlight the desired timer using the up and down
navigation keys and press the Reset soft key. You must first enter the
phone password and then press the OK soft key.
Note: The password is preset to “00000000” at the factory. To change this password, see
“Change password” on page 134.
Recent calls
52
T609.book Page 53 Monday, April 17, 2006 10:30 PM
Messages
Instant Messaging
Instant Messaging (IM) (Menu 2.1) is a way of sending short, simple
messages that are delivered immediately to users online at that
moment.
Before using this feature, you need to subscribe to a messenger
service. For further details, contact your service provider.
Starting your Instant Messaging
1. Press Menu 2.1 for Instant Messaging.
2. Using the Navigation keys, scroll to the desired IM service that
you are subscribed to and press the Select soft key.
Note: A warning message may appear requesting that you accept the licensing
agreement for the IM service. If this message appears, press the Allow soft key to
continue.
3. Highlight Sign in, and press the Select soft key.
4. Enter the required sign on information such as ID and password
and press the OK soft key.
Messages
53
Messages
You can send and receive a range of different message types from
your mobile phone, including:
♦Instant Messaging allows you to send and receive instant
messages over a variety of different IM clients.
♦Create new message allows you to compose and send text and
multimedia messages to other phones able to receive the
messages.
♦Voice mail allows you to access your voice mailbox and check for
voice messages.
♦Broadcast messages allows you to receive specific information
related to a specific area (cell) from your service provider.
T609.book Page 54 Monday, April 17, 2006 10:30 PM
Note: The information required for sign on will vary depending on the instant messaging
provider you are using.
5. Follow the on-screen instructions to read, reply to, compose,
send, and manage your IM account.
Using the Instant Messenger Options
On the sign-on screen of the messenger, press the Select soft key to
access the following options:
Note: Depending on your IM community, the menu options will change slightly.
♦Sign in: allows you to login to your IM account.
♦Saved convers./Saved conversations: shows permanent records
of your IM conversations.
♦Offline convers./Offline conversations: shows dynamic records
of your last 10 IM conversations.
♦Preferences/Settings: allows you to change your Default
community and Community settings.
♦Help: provides various help information depending on the
community you have selected.
Create new message
Use the Create new message option (Menu 2.2)to compose new text
and multimedia messages:
♦Text messages allows you to send text messages (SMS) to
another text messaging-capable phone.
♦Multimedia messages can be sent to another multimedia message
(MMS) capable phone or an email address. Multimedia messages
can contain text, photos, videos and voice attachments.
Creating a Text Message
1. Press Menu 2.2.1 for Text Message.
Messages
54
T609.book Page 55 Monday, April 17, 2006 10:30 PM
2. Create your message.
3. When you finish entering your message, press the Options soft
key and select Send, or press the
key.
4. Highlight one of the following options:
♦Recent log: allows you to select from recipients of your
previous messages.
♦Contacts: allows you to select the phone number(s) you want
from your Contacts list.
♦Phone number: allows you to enter a number to send your
message to.
5. If you chose Recent log or Contacts, highlight the desired entry
and press the Select soft key or the
key.
If you chose Phone number, enter the number in the To: text box.
To add another destination, select an empty slot and press the
Options soft key.
Note: When entering multiple destinations, you can also choose Group and Save to
drafts options in addition to the other send options.
6. To add additional destinations, repeat step 5. You can enter up to
20 destinations.
7. When you have finished entering the destinations, press the
Options soft key, highlight the Send option and press the Select
soft key.
Your phone sends the text message. After sending, the message
is saved in the Sentbox.
Messages
55
Messages
For further details about entering characters, see “Entering Text”
on page 29.
T609.book Page 56 Monday, April 17, 2006 10:30 PM
Text Message Options
While you are composing your text message, press the Options soft
key to select from the following:
♦Send: allows you to send the message.
♦Insert text via: allows you to insert one of the following:
● Text templates allows you to apply one of the preset message
templates to the text. Select one of the 10 items stored in the
Text messages template menu.
● Contacts allows you to add names and phone numbers to your
message from your Contacts list.
● Favorites allows you to add Internet addresses to your
message.
♦Add content: allows you to add a picture, animation, or melody to
your message.
♦Attach: allows you to attach a Name card, Schedule, Anniversary,
Miscellaneous, or Task items to your message.
♦Save to drafts: save the message to your Drafts folder.
♦Language select: allows you to set the language to English or
Français.
♦Text style: allows you to format the style of the text.
● For the Text size, Large, Medium, and Small size are available.
● Text mode options are Normal, Underline, and Strikethrough.
● The options for Bold and Italic are set by using the key to place
a checkmark by them.
♦Back: allows you exit your message without sending it.
Creating a Long Text Message
When you write a text message, the phone automatically splits it into
several messages if the message exceeds the maximum number of
characters allowed in a single message. The number of split
messages to be sent is shown each time your message is split.
Depending on your service provider, the maximum number of
characters may vary.
Messages
56
T609.book Page 57 Monday, April 17, 2006 10:30 PM
Creating and Sending a Multimedia Message
2. Add the message content by selecting the following media types:
♦Subject: allows you to enter text for the subject. When
finished, press
to return to the media type screen. While
entering the subject text, the following Options are available:
• Save: saves the subject text, returning you to the media
type screen.
• Insert text via: allows you to insert Text templates to
apply a preset message template, Contacts to add names
and phone numbers from your Contacts list, or Favorites.
• Save to drafts: save the message to your Drafts folder.
• Language select: allows you to set the language to
English or Français.
• Cancel: discards your subject text, returning you to the
media type screen.
♦Image & Video: to take a picture or add an existing picture or
video from your Image or Video folders.
♦Sound: allows you to add a sound file. You can record a new
audio clip or add an existing audio clip, or select one of sound
clips stored in the Downloaded or Favorite audio folders.
♦Message: enter the message text and press the key. When
finished, press
to return to the media type screen. While
entering the message text, the following options are available:
• Save: saves the message text, returning you to the media
type screen.
• Insert text via: allows you to insert Text templates to
apply a preset message template, Contacts to add names
and phone numbers from your Contacts list, or Favorites
to add Internet addresses.
• Save to drafts: save the message to your Drafts folder.
Messages
57
Messages
1. Press Menu 2.2.2 for Multimedia message. The media types
screen is displayed.
T609.book Page 58 Monday, April 17, 2006 10:30 PM
• Language select: allows you to set the language to
English or Français.
• Cancel: discards your subject text, returning you to the
media type screen.
3. After you have created the message, press the Options soft key
and select Send.
Multimedia Message Options
While you are composing your multimedia message, press the
Options soft key to select from the following:
♦Add Image: allows you to add an image by selecting Take photo or
from an image stored in either My downloads, My photos or on
your Memory card.
♦Add video: allows you to add an image by selecting Record Video
or from an image stored in either Downloaded videos, My videos
or on your Memory card.
♦Preview: shows the message you created.
♦Send: allows you to send the message.
♦Save to drafts: saves the message to the Draft folder.
♦Add page: allows your to add another page to the message.
♦Edit page: changes the duration or order of the current page.
♦Attach: allows you to attach a Name card, Schedule, Anniversary,
Miscellaneous, or Task items to your message.
My messages
The My messages screen (Menu 2.3) provides 4 message folders:
♦Inbox: stores incoming text and multimedia messages
♦Sentbox: stores the messages your phone has successfully sent.
♦Outbox: stores the messages and emails your phone is attempting
to send temporarily.
♦Drafts: stores the messages and emails you have saved without
sending or tried to send.
Messages
58
T609.book Page 59 Monday, April 17, 2006 10:30 PM
Viewing a Message in your Inbox
♦
♦
♦
: indicates a text message
: indicates multimedia message
indicates a push message
The icons on the right of the message subject indicate the
memory location and the lock status.
2. To view a message in the list, highlight it and press
.
For a Multimedia message, the display presents the message and
then switches to the message view screen.
3. Press the Up or Down key to scroll through the message screen.
For a Multimedia message, press the Left or Right key to scroll to
other pages, if the message has more than one page.
You can access the message options by pressing the Options soft
key. For more information, see below.
4. Press the * or # key to scroll to the previous or next message.
5. When you have finished, press the
key.
Using Message Options
While viewing a message, press the Options soft key to access the
following options:
Options for SMS Messages
♦Reply via: allows you to reply to the message received via either a
Text Message or a Multimedia Message.
♦Call back: allows you to dial the number that the message has
listed.
♦Forward: allows you to forward the message to another
destination.
Messages
59
Messages
1. In Idle mode, press Menu 2.3.1. The message list opens. The
icons on the left of the number indicates the message type
T609.book Page 60 Monday, April 17, 2006 10:30 PM
♦Delete: deletes the currently selected message.
♦Move to Phone/SIM: allows you to move the message to the
Phone or SIM card’s memory.
♦Save Address: allows you to extract the recipient or sender’s
number or address, and URL from the message text so that you
can make a call, send a SMS or multimedia message, or save them
in your phone’s Contacts list.
♦Save Media: allows you to move the attachment to a specific
folder.
♦Protection: allows you to set the protection for the message.
Options for Multimedia Messages
♦Reply via: allows you to reply to the message received via either a
Text Message or a Multimedia Message.
♦Reply all via: allows you to reply to all addresses listed in the
recipient list.
♦Call back: allows you to dial the number from which the message
was originated.
♦Forward: allows you to forward the message to another
destination. You may Add Subject or simply Send.
♦Delete: deletes the message.
♦Save Address: allows you to extract the recipient or sender’s
number or address, and URL from the message text so that you
can make a call, send a SMS or multimedia message, or save them
in your phone’s Contacts list.
♦Save Contents: allows you to save the picture, video clip, or audio
clip from the message received.
♦Properties: shows you information about the message.
Templates
Using this menu (Menu 2.4), you can preset the messages that you
use most frequently.
Select the message template you want and press the Options soft
key.
The following options are available:
Messages
60
T609.book Page 61 Monday, April 17, 2006 10:30 PM
♦Edit: allows you to edit the currently-highlighted message. For
Voice mail
This menu (Menu 2.5) allows you to access your voice mailbox, if
your network supports this service.
The following options are available:
♦Call Voice mail: before using the Voice mail feature, you must
have a valid voice server number configured in your phone. Your
service provider may have configured the number for you already
or you have to enter the voice server number obtained from your
service provider; see Menu 2.5.2. You can then select this option
and press the OK soft key to listen to your messages. You can
quickly connect to the voice server by pressing and holding the 1
key in Idle mode.
♦Voice mail number: allows you to change the voice mail server
number, if necessary.
1. Select the voice server that you wish to change and press the OK
soft key.
2. Press the Edit soft key.
3. To change the voice server number:
To
enter the server number
Press the
corresponding numeric keys.
Messages
61
Messages
further details about entering characters, see “Entering Text” on
page 29.
♦Send Message: allows you to compose a message with the
template already inserted into the body of the message. Once you
have completed your message, you can send, save and send, or
simply save it. For further details about how to send a message,
see page 54.
♦Add new allows you to create a new template message.
♦Delete: allows you to delete the message. You are asked to
confirm the deletion by pressing the Yes soft key.
T609.book Page 62 Monday, April 17, 2006 10:30 PM
To
Press the
correct a digit
.
move the cursor to the left or
right without clearing a digit
Left or Right key.
Note: Voice mail is a network feature. Please contact your service provider for further
details.
Delete all
This menu (Menu 2.6) allows you to delete all of the text messages
in each message box. You can also delete all of your messages at one
time.
1. In Idle mode, press the Menu 2.6 for Delete all.
2. Select the type of messages for which you want to delete.
To
select a message box
place or remove a check
mark
delete the marked
messages
Press the
Up or Down key. To delete all of your
messages, select All messages.
key.
Delete soft key.
When a confirming message displays, press the Yes soft key to
confirm.
Messages
62
T609.book Page 63 Monday, April 17, 2006 10:30 PM
Settings
IM
The following IM settings options are available:
Choose your community
This setting sets the default IM community that your phone uses.
Your choices are MSN Messenger or Yahoo!
Profile settings
This setting sets the default profile used for online access. Your
choices are GoRogers, Rogers MMS, or Rogers Internet. For more
information, see “Connection settings” on page 136.
Community settings
This menu allows you to adjust your IM client’s behavior. Please note
that the menu options change slightly, depending on your IM
community. You can adjust the following settings:
♦Sounds/Sound settings: adjusts how your phone indicates a New
IM/Receive message, Alert/Contact alert or System message.
You can select:
● Melody
● Vibration
● Silent
♦Sorting: arranges your IM contacts by By alphabet/Alphabet or By
status/Status.
♦Automatic sign-in/Auto-sign in: enables or disables auto-sign on.
Text Message
The following Text Message (SMS) settings options are available:
Messages
63
Messages
You can set up various options for using text and multimedia
messaging services (Menu 2.7).
T609.book Page 64 Monday, April 17, 2006 10:30 PM
Send settings
♦Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
♦Delivery report: when this option is enabled, the network informs
you whether or not your message has been delivered.
♦Bearer selection: select the bearer to be used for each type of
network address accessed: GSM or GPRS preferred.
Current profile
The Current profile menu allows you to select which profile will be
used for text messaging. Highlight the profile you wish to use and
press the Select soft key.
Profile settings
The Profile settings menu allows you to modify the settings for each
profile. Highlight the profile you wish to modify and press the Edit
soft key:
♦Service center: allows the recipient of your message to send you a
reply through your message center, if your network supports this
service.
♦Destination address: allows you to set a destination address for
any replies to your text message.
♦Default type: set the default type to one of Text, Fax, Email or
Paging.
♦Validity period: you can select the length of time your messages
are stored in the message center after they are sent. The actual
expiry date is determined by your service provider's configuration.
♦Setting name: you can provide a custom name for your profile.
When you are finished editing your Profile setting, press the Save
Multimedia Message
The following options are available:
Messages
64
T609.book Page 65 Monday, April 17, 2006 10:30 PM
Retrieve settings
♦Anonymous reject: you can set your phone to automatically reject
or receive anonymous messages.
♦Ads allowed: you can set your phone to automatically reject or
receive advertising messages.
♦Report allowed: when this option is enabled, the sender of an
incoming message receives a delivery report from the network.
Profile
This setting sets the default profile used for MMS access. Your
choices are GoRogers, Rogers MMS or Rogers Internet. For more
information, see “Connection settings” on page 136.
Push Message
The following options are available:
♦Receive: allows you to enable or disable the reception of push
messages. Choose between Always, SMS-C specific and Never.
♦Service center: allows the recipient of your message to send you a
reply through your message center, if your network supports this
service.
Messages
65
Messages
Send settings
♦Delivery report: when this option is enabled, the network informs
you whether or not your message has been delivered.
♦Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
♦Priority: you can select the priority level of your messages.
♦Expiry date: you can select the length of time your messages are
stored in the message center after they are sent. The actual expiry
date is determined by your service provider's configuration.
♦Delivery time: you can set a time delay before the phone sends
your messages.
T609.book Page 66 Monday, April 17, 2006 10:30 PM
Broadcast messages
Broadcast messages (Menu 2.8) are transmitted to all handsets
within the area.
The following options are available:
♦Receive: allows you to enable or disable the reception of
broadcast messages.
♦Channel: allows you to indicate the channels from which you wish
to receive broadcast messages. Press
to check/uncheck a
channel. Press the Options soft key to Save, Add Channels, Delete
or Edit the marked channels.
♦Language: allows you to select your preferred language in which
to display cell broadcast messages. Please contact your service
provider for further details.
Memory status
You can check the memory amount available and remaining for
storing the messages.
1. From the Idle menu, select Menu 2.9 for Memory status.
2. The screen displays the amount of memory being used by your
text messages. Press the left and right soft keys to view the
memory usage of multimedia, broadcast and push messages.
3. When you have finished, press the
key.
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer text and multimedia messages, as well as
email between your phone and a computer. For more information on
Samsung PC Studio 3, consult the online help provided with PC
Studio 3.
Messages
66
T609.book Page 67 Monday, April 17, 2006 10:30 PM
Games
You can download and play games already stored on your phone.
Get Games
You can download more games from the network. A charge may
apply. Once you have downloaded games, they are added to your
phone’s list of games.
My games
Note: The procedures explained below are for the default games. For downloaded
games, the procedure may be different.
1. In Idle mode, press the Menu soft key to access the menu.
2. Highlight Games and press the Select soft key or the
3. Highlight My games and press the
key.
key.
4. Scroll to the game you want and press the
key.
5. On the startup screen of the game, scroll to an option using the
Navigation keys and press
to confirm your selection.
While you are playing a
game, to
adjust the sound volume
exit the game
Press the
Volume keys
key.
Games
67
Games
Note: Game services may not be available depending upon your service provider.
T609.book Page 68 Monday, April 17, 2006 10:30 PM
Viewing Game Information
1. In Idle mode, select Menu 3 for Games.
2. Highlight My games and press the
key.
3. Scroll to the game you want, press the Options soft key and
select Properties.
The display shows information about the game, such as the file size,
application version and its vendor.
4. To exit and return to the Options screen, press the OK soft key or
the
key.
Deleting Games
1. From your list of games, scroll to the game you want to delete
and press the Options soft key.
2. Scroll to Delete and press the
key.
3. Confirm that you want to delete the game by pressing the OK soft
key.
Note: The preloaded default games cannot be deleted.
Games
68
T609.book Page 69 Monday, April 17, 2006 10:30 PM
Applications
Applications enable you to:
♦set an alarm so that the phone rings at a specific time, such as to
remind you of an appointment.
♦view the calendar and organize your schedule.
♦use the phone as a calculator for basic mathematical equations or
currency exchange operations.
♦view times in different parts of the world.
♦use a timer or stopwatch.
Alarm
Applications
69
Applications
In Idle mode, press Menu 4.1 to start the Alarm feature. This feature
allows you to:
♦set the alarm to ring at a specific time.
♦set the phone to switch on automatically and ring the alarm even
if the phone is switched off.
The following options are available:
♦Wake-up call: this alarm type repeats daily on a specified range
of days in the week.
♦Alarm1/2: this alarm type occurs only once or repeats daily.
♦Auto power: when this option is set to On, the alarm rings at the
specified time, even if the phone is switched off. If the menu option
is set to Off and the phone is switched off at the specified time, the
alarm does not ring.
T609.book Page 70 Monday, April 17, 2006 10:30 PM
To set an alarm or wake-up call:
1. Choose the type of alarm to be set and press the Select soft key.
2. Enable or disable the Alarm by pressing the Left or Right
navigation keys.
3. Press the Down navigation key to select Alarm time. Use the
numeric keys to enter the time for the alarm to sound.
Your phone is preset to use 12-hour format. To change the
format, see “Time & Date” on page 119.
4. Press the Down navigation key to select AM/PM, if necessary.
Select AM or PM for 12-hour format by pressing the Left or Right
navigation keys.
5. Press the Down navigation key to select Repeat. Select Once,
Everyday, Except weekend, or Except Sunday by pressing the
Left or Right navigation keys.
6. Press the Down navigation key to select Alarm tone. Press
to
display the available audio folders. See “Fun & Tunes” on page 98
for further information about playing and selecting from My
sounds, Music or Default sounds.
7. To stop the alarm or wake-up call when it rings, open the folder
and press the Confirm or Snooze soft key.
Applications
70
T609.book Page 71 Monday, April 17, 2006 10:30 PM
Calendar
With the Calendar feature (Menu 4.2), you can:
♦consult the calendar to check your memos.
♦write memos to keep track of your schedule.
♦set an alarm to act as a reminder.
Consulting the Calendar
Depending on your current view, some of the following options are
available when you press the Options soft key:
♦View Mode: changes how the calendar is displayed between
Month view, Week view or Day view.
♦Create: allows you to create the following types of calendar
entries. See “Writing a Calendar Entry” on page 72 for further
information:
● Schedule: Indicates an event at a specific time and place.
● Anniversary: Indicates a special occasion.
● Miscellaneous: Indicates other unspecified events.
♦Go to: allows you to go to a specific date: Today or Date.
♦Delete: allows you to delete entries according to the following
criteria: Selected, Periods, This month, This week, This day, or
All.
Applications
71
Applications
You can view the Calendar in one of the following ways:
♦Month view: a monthly calendar is displayed, the calendar appears
with today’s date highlighted.
♦Week view: displays all of your week’s appointments in hourly
blocks.
♦Day view: displays all the scheduled events for a given date.
♦Schedule: displays all your scheduled events.
♦Anniversary: displays all your Anniversary events.
♦Miscellaneous: displays all your Miscellaneous events.
♦Missed alarm events: displays all of your missed alarm events.
♦Memory status: You can check the memory amount available and
remaining for stored events.
T609.book Page 72 Monday, April 17, 2006 10:30 PM
Writing a Calendar Entry
You can create up to 300 calendar entries. To write or edit a calendar
entry on a specific date:
1. Select a timeslot on the current view (month, week or day), using
the Navigation keys and press the
key.
Note: If you are on the Monthly view, you can skip to the previous or next month by
pressing the Volume keys on the left side of the phone.
2. Press the Options soft key and select Create. Choose the type of
entry: Schedule, Anniversary, or Miscellaneous.
3. Enter the entry information. Press the Down navigation key to
select each option.
Note: Depending on the type of entry, not all options will be available.
♦Subject/Occasion: Enter text describing the event. See “Entering
Text” on page 29 for further information.
♦Details: Enter additional information, if required.
♦Start date: Enter the start date. Use the numeric keys to enter the
numbers for dates and times.
♦Start time: Enter the start time.
♦End date/Due date: Enter the end date for the event or due date for
the task.
♦End time: Enter the end time.
♦Location: Enter text describing the location.
♦Alarm tone: Press the key to enable or disable the alarm. If
enabled, you can select the alarm tone as well as the time prior to
the event. Press the
key to select a different alarm tone. See
“Sound settings” on page 124 for further information about alarm
tones.
♦Repeat/Repeat every year: Press the key to enable or disable
the repeat. Depending on the type of entry, you can configure the
repeat period by pressing the Left or Right navigation key.
Applications
72
T609.book Page 73 Monday, April 17, 2006 10:30 PM
♦Until: Enter the date when the entry is no longer repeated.
4. Press the Save soft key to save the calendar entry.
The corners of the date on the calendar change to indicate that a
calendar entry exists for that date.
Viewing a Calendar Entry
Task
You can use the Task function to in the same way you would use a todo list. When the task has been completed, you can check it off as
done.
To enter tasks into your Organizer, follow these steps:
1. In Idle mode, press Menu 4.3 to start the Task feature
2. The first time you enter the task menu, it will be empty. Press the
Options soft key and select Create. Press the Select soft key or
the
key.
3. In the Task text box, enter your task. It can be up to 100
characters long.
Applications
73
Applications
When you select a day for which a calendar entry already exists, the
latest entry for the day displays.
If more than one entry is stored, press the Up or Down navigation
key to scroll to the previous or next entry. You can use the following
options by pressing the Options soft key:
♦View: allows you to view the highlighted entry details.
♦Create: allows you to create a new entry for the highlighted date.
♦Send via: allows you to send the highlighted entry in Text or
Multimedia message or to a compatible Bluetooth device.
♦View Mode: changes how the calendar is displayed: Month view,
Day view or Week view.
♦Delete: allows you to delete entries according to one of the listed
criteria.
T609.book Page 74 Monday, April 17, 2006 10:30 PM
4. Press the Down Navigation key and highlight the Start date
option. If you want to have a start date, press the
key to check
the box then use the Down key to highlight the Start date text box.
Enter the start date.
5. Scroll down and repeat step 4 for the Due date.
6. Scroll down and highlight Priority. Use the Left or Right
Navigation keys to select High, Normal, or Low.
7. Press the Save soft key.
To see your Task list, you can go to the Task option in the Organizer
or you can see each task under Day view of the calendar for the day it
was started.
To mark a task as Done:
1. Select the task in the task list.
2. Press the Options soft key and highlight Done. Press the Select
soft key or the
key.
3. The task will have a check mark after it in the Task list.
Calculator
With this feature (Menu 4.4), you can use the phone as a calculator.
The calculator provides basic arithmetic functions: addition,
subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
♦To delete mistakes or clear the display, press the
key.
♦To include a decimal point or a bracket, press the left soft key
until the symbol you want displays.
2. Use the navigation key to select the operations that you want:
+ (addition), - (subtraction), X (multiplication), ÷ (division).
3. Enter the second number.
Applications
74
T609.book Page 75 Monday, April 17, 2006 10:30 PM
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
Converter
Using the Converter application (Menu 4.5), you can easily
determine many unit conversions (length, weight, volume, area,
temperature) as well as currency conversions.
1. Select the conversion type and press the Select soft key:
2. Press the Left or Right navigation key to select the original unit
type (From) and press Down to select the next field.
If you selected Currency, you can view the exchange rates by
pressing the Option soft key.
3. Enter the amount to convert. Use the * key to insert a decimal.
Press Down to select the next field.
4. Press the Left or Right navigation key to select the new unit type
(To) and press Down to select the next field.
The converted value is displayed.
5. Press the Back soft key to calculate a new value.
Timer
The Timer application (Menu 4.6) allows you to create a digital
countdown.
Applications
75
Applications
♦Currency
♦Length
♦Weight
♦Volume
♦Area
♦Temperature
T609.book Page 76 Monday, April 17, 2006 10:30 PM
To start the timer:
1. Press the Set soft key.
2. Using the numeric keys, enter the amount of time that you wish
to countdown from and press the OK soft key. Press the
key to
start timer.
3. Press the
key to stop or restart timer.
Stopwatch
The Stopwatch application (Menu 4.7) allows you to use your phone
as a stop watch.
1. Press the
key to start the stopwatch. You can take up to four
laptimes by pressing the
key.
2. Press the Reset soft key to erase all stop watch times recorded.
World time
The World time (Menu 4.8) allows you to view the time of day or
night in any part of the world.
1. Use the navigation keys to scroll through different time zones. For
each time zone, a major city is displayed.
2. You can choose the following options by pressing the Options
soft key:
♦Save: Change the home time zone in the display.
♦Set daylight savings time: Select daylight savings time for the
displayed time zone.
Applications
76
T609.book Page 77 Monday, April 17, 2006 10:30 PM
Rogers Mall
The Rogers Mall menu (Menu 5) provides a convenient place to
download all your ringtunes, games and graphics. In addition, you
can view photos that you have put online and surf the Internet.
Get Ring tunes
This menu (Menu 5.1) allows you to download ring tunes from your
service provider. Follow the online instructions shown on your
display screen. Once you have downloaded ring tunes, they are
added to your phone’s list of ring tunes. See “Ringtunes” on page 98.
Get Music
This menu (Menu 5.2) takes you to an online music store provided
by your service provider. Follow the online instructions shown on
your display screen.
Once you have downloaded a song, you can enjoy it using the
phone’s music player. For more information, see “MP3 Player” on
page 88.
This menu (Menu 5.3) allows you to download video games from
your service provider. Follow the online instructions shown on your
display screen. Once you have downloaded games, they are added
to your phone’s list of games.
Note: Game services may not be available depending upon your service provider.
Get Graphics
This menu (Menu 5.4) allows you to download new wallpapers from
your service provider. Follow the online instructions shown on your
Rogers Mall
77
Rogers Mall
Get Games
T609.book Page 78 Monday, April 17, 2006 10:30 PM
display screen. Once you have downloaded graphics, they are added
to your phone’s list of wallpapers.
Get Video
This menu (Menu 5.5) allows you to download new video clips from
your service provider. Follow the online instructions shown on your
display screen. Once you have downloaded the video clips, they are
added to your phone’s list of videos.
Get Celebrity Voicemail
This menu (Menu 5.6) provides a a “celebrity” or other personalities
answer voicemail calls for you. Follow the online instructions shown
on your display screen.
Get My Pix - Online Album
This menu (Menu 5.7) allows you to view pictures that you have
taken with your camera and post them online. Follow the online
instructions shown on your display screen.
Navigate Home
This menu (Menu 5.8) takes you to an online homepage provided by
your service provider. Selecting this menu connects the phone to the
network and loads the homepage of the Wireless Web service
provider.
Note: You can also press the
key in Idle mode.
♦To scroll through the screen, use the Up and Down navigation
keys.
♦To select a browser item, press the key.
♦To exit the browser at any time, press the
Rogers Mall
78
key.
T609.book Page 79 Monday, April 17, 2006 10:30 PM
Exiting the Internet Browser
To exit the browser at any time, simply press the
key.
Navigating the Internet Browser
To
Press the
scroll through and select
browser items
Up or Down navigation key until the
item is highlighted, and then press the
key to confirm the selection.
return to the previous
page
return to the startup
homepage
Back soft key.
press the Menu soft key and select
Home.
Entering Text in the Internet Browser
When you are prompted to enter text, the current text input mode is
indicated on the screen. See “Entering Text” on page 29 for
information.
Various menu options are available when you are using the Internet
Browser to navigate the Wireless Web.
To access a menu option:
1. Press the Menu soft key. A menu list displays.
2. Highlight a menu by pressing the Up or Down navigation key.
3. Select an option by pressing the Select soft key.
4. If necessary, select a secondary option using the Up and Down
navigation keys, and press the Select soft key to confirm.
Rogers Mall
79
Rogers Mall
Selecting and Using Browser Menu Options
T609.book Page 80 Monday, April 17, 2006 10:30 PM
The following options are available:
♦Favorites: allows you to bookmark and go to your favorite pages.
♦Reload: reloads the current page.
♦Home: takes you back at any time to the home page of the Wireless
Web service provider.
♦Go to URL: allows you to manually enter the URL address of a Web
page. After entering an address, press the OK soft key to go there
directly.
♦Show URL: displays the URL address of the Web page to which you
are currently connected. It also enables you to set the current site
as the startup home page or add it to your favorites.
To
Press the
set the current page as your
startup home page
Options soft key and select the
Save to home option.
set a bookmark for the
current page
Option soft key and select the Save
to favorite option
cancel your setting
Back soft key.
♦Clear cache: deletes the information stored in the cache, which
stores the most recently accessed Web pages.
♦Inbox: allows you to read messages received from the web server.
♦Show images: displays the images on the web page alone.
♦Certificates: allows you to view certificates.
♦Text message: allows you to compose a text message.
Rogers Mall
80
T609.book Page 81 Monday, April 17, 2006 10:30 PM
Media
The Media menu (Menu 6) provides access to the following features:
♦take pictures and video clips using the Camera.
♦play music with the MP3 Player.
♦download new music from the Rogers MusicStore.
♦use the hands-free voice recognition feature.
Camera
Using the camera menu (Menu 6.1) in your phone, you can take
photos of people or events while on the move. Additionally, you can
send photos to other people in a multimedia message or set one as a
wallpaper.
You can also record videos using your phone as a video camcorder.
The video clip can be send to other video multimedia message
capable phones.
Note: You can quickly enter the Camera menu by pressing the side Camera key.
Caution: Do not take photos of people without their permission. Do not take photos in a
place where cameras are not allowed or where you might interfere with another person’s
privacy.
Take picture
This menu allows you to take a photo. Your camera produces JPEG
photos.
1. Press Menu 6.1.1 to start the camera. Alternatively, press and
hold the Camera key ( ) on the right side of the phone in Idle
mode.
The image to be captured appears on the display.
Media
81
Media
Taking a Photo with the Folder Open
T609.book Page 82 Monday, April 17, 2006 10:30 PM
2. Adjust the image by aiming the camera at the subject.
3. Apply the desired effects and options using either the left soft key
or the keypad shortcuts (see “Using the Camera Options” on
page 83).
4. Press the Camera key on the right side of the phone or the
to take the photo.
key
♦Press the Yes soft key to save the image to the default storage
location.
♦To discard the photo and return to the capture mode, press
.
When you press the Options soft key after saving a photo, the
following options are available:
♦Send via: allows you to send the photo using a Multimedia
message or to a compatible Bluetooth enabled device.
♦Send to Online Album: sends the picture to your online album.
♦Take another allows you to take another photo immediately.
♦Set as:
•Caller ID: allows you to set the photo as a caller ID image for
Contacts list entries.
•Wallpaper: allows you to set the photo as your wallpaper for the
idle screen.
♦Delete: deletes the photo.
♦Rename: allows you to change the name of the photo.
♦Go to My photos: views the photo album in the handset.
♦Share for Bluetooth: allows other Bluetooth-enabled devices
within range to download copies of your picture.
♦Protection: prevents a photo in your photo album from being
accidentally deleted. You must unprotect a photo before it can be
deleted.
♦Properties: shows the properties of the photo, such as the Date it
was saved, Protection, and Name.
Media
82
T609.book Page 83 Monday, April 17, 2006 10:30 PM
Using the Camera Options
In Capture mode, you can use various options by pressing the left
soft key.
To
Press the
scroll to an option
Up or Down key.
select the highlighted
option
Select soft key or the Right
key.
return to Capture mode
or Back soft key.
Media
83
Media
The following options are available:
♦Record Video: switches your phone to Video mode.
♦Shooting mode: allows you to switch camera modes.
● Single shot: the default for the camera
● Multi shot: allows you to take a series of action stills. Select the
the number of photos the camera will take and the capture
speed, High or Normal. When you press the Camera key, the
camera takes photos successively. After taking photos, press
the Save All soft key to save all of them or the Save soft key to
save the selected one.
● Mosaic shot: allows you to take a series of photos successively
and arrange them in a grid. Select the number of photos in the
grid and whether the camera automatically takes the pictures
or whether each picture is taken manually.
♦Effects: allows you to change the color tone or apply special
effects to the photo.
♦Frames: allows you to use a decorated frame. Select a frame from
the list using the Navigation keys and press the View soft key. If
you wish to keep the selected frame press the Select soft key. To
return to the list, press the Back soft key.
T609.book Page 84 Monday, April 17, 2006 10:30 PM
♦Timer: allows you to have a delay time before the camera takes the
photo. Select the length of time you want. When you press the
Camera key, the camera takes the photo after a specified time.
♦Go to My photos: allows you to view photos stored in your photo
album.
♦Settings: allows you to change the options for taking a photo.
● Size: allows you to select a photo size. Once you change this
setting, it is saved for the next shots.
● Quality: allows you to select the photo quality. Once you change
this setting, it is saved for future shots.
● Viewfinder: allows you to change between a Full screen and
Standard ratio display on your LCD screen.
● Shutter sound: allows you to change your camera’s shutter
sound.
● Zoom sound: allows you to change whether your camera makes
a noise when you zoom in or out.
● Brightness sound: allows you to change whether your camera
makes a noise when you change the Brightness level.
● Default name: allows you to change the default file name for
your photos.
♦Camera shortcuts: shows an illustration of the key commands
used in Camera mode. Use the Next or Previous soft key to move
through the illustrations.
Taking a Photo with the Folder Closed
1. Close the phone.
2. To turn the camera on, press and hold the Camera key on the
right side of the phone.
The image to be captured appears on the external display.
3. Adjust the image by aiming the camera at the subject.
4. Press the Camera key to take the photo.
Media
84
T609.book Page 85 Monday, April 17, 2006 10:30 PM
5. Open the phone. Press the Yes soft key to save the image to the
default storage location.
Record video
This menu allows you to take video clips.
Taking a Video with the Folder Open
1. Press Menu 6.1.2 to start the video camera.
2. Apply the desired effects and options
3. Press the Camera key on the right side of the phone or the
to start the video.
key
4. When you are finished, press the Camera key on the right side of
the phone or the
key to stop the video.
The video clip is saved in the My videos folder.
Media
85
Media
Using the Video Options
In Record mode, you can use various options for the camera by
pressing the left soft key. The following options are available:
♦Take picture: switches your phone to camera mode.
♦Effects: allows you to change the color tone or apply special
effects to the video.
♦Timer: allows you to set a time delay before the camera starts
recording a video. Select the length of delay you want. When you
press the key. The camera begins recording a video after the
specified time.
♦Go to My videos: allows you to go to the Video menu. For more
options information, see “My videos” on page 87.
♦Settings: allows you to change the image settings.
● Recording Mode: Allows you to set the size of recording: Limit
for message or Normal.
T609.book Page 86 Monday, April 17, 2006 10:30 PM
Size: allows you to set the image size to either (176x144) or
(128x96). The icon for the selected image size displays on the
capture screen.
● Viewfinder: allows you to set the screen display. Choose from
Full screen or Standard ratio.
● Audio record: allows you to turn the audio On or Off.
● Default name: allows you to change the default file name for
your video clips.
♦Camcorder shortcuts: shows an illustration of the key commands
used in Video mode. Use the Next or Previous soft key to move
through the illustrations.
●
My photos
When you access this menu, your phone displays your photos in
Thumbnail mode, which shows all your photos as smaller images.
1. Use the Navigation keys to scroll through the photos.
2. To view photos on the full screen, select the photo you want to
view and then press the
key. In this mode, you can scroll
through the photos by using the Left and Right keys. To go back
to Thumbnail mode, press the Back soft key.
3. Press the Options soft key to use the following options:
♦View/List: displays the currently highlighted photo or returns
the back to the list.
♦Send via: allows you to send the photo using a Multimedia
message or to a compatible Bluetooth enabled device.
♦Set as:
• Caller ID: allows you to set the photo as a caller ID image for
Contacts list entries.
• Wallpaper: allows you to set the photo as your wallpaper on
the idle screen.
♦Move to memory card: moves the photo from your phone’s
memory to the memory card.
Media
86
T609.book Page 87 Monday, April 17, 2006 10:30 PM
♦Copy to memory card: makes a copy of the photo onto the
memory card.
♦Delete: allows you to delete the photo or to delete all photos.
♦Rename: allows you to change the name of the photo.
♦Display mode: allows you to display the pictures in your photo
album in either List view or Thumbnail view mode.
♦Slide show: allows you to see all of your photos in a slide show
presentation.
♦Share for Bluetooth: allows the photo to be shared or released
for the use of another Bluetooth device.
♦Protection: prevents a photo in your photo album from being
accidentally deleted. You must unprotect a photo before it can
be deleted.
♦Properties: shows the properties of the photo, such as the
Name, Time, Format, Size, Resolution, and Protection.
My videos
When you access this menu, your phone displays your videos.
1. Use the Navigation keys to scroll through the videos.
2. To play the videos, select the video you want to view and then
press the
key. You can rewind using the Left navigation key
and fast forward using the right navigation key. The
key starts
and pauses the video.
3. Press the Options soft key to use the following options:
♦Play the video.
♦Send via: allows you to send the video clip using a multimedia
message or to a compatible Bluetooth enabled device.
phone’s memory to the memory card.
♦Copy to memory card: makes a copy of the video clip onto the
memory card.
♦Delete: allows you to delete the video or to delete all videos.
♦Rename: allows you to change the name of the video.
Media
87
Media
♦Move to memory card: moves the video clip from your
T609.book Page 88 Monday, April 17, 2006 10:30 PM
♦Display mode allows you to view your video collection in list
format or as a group of thumbnails.
♦Share for Bluetooth: allows the video clip to be shared or
released for the use of another Bluetooth device.
♦Protection: prevents a video in your photo album from being
accidentally deleted. You must unprotect a video before it can
be deleted.
♦Properties: shows the properties of the photo, such as the
Name, Time, Format, Size, Resolution, and Protection.
View Online Album
This menu allows you to view pictures that you have taken with your
camera and post them online. All pictures sent or received via MMS
or send to the online album directly can be viewed via this menu.
Follow the online instructions shown on your display screen.
MP3 Player
The MP3 Player (Menu 6.2) can be used to play music you have
either downloaded from the Rogers MusicStore or loaded from your
PC to your micro SD memory card.
Note: The following characters cannot be used in the filename: / \ * ? “ < > : | . The
file name is limited to 47 total characters.
Creating your playlist
Before you can use the MP3 to play music, you must first create a
playlist:
1. Press Menu 6.2 to start the MP3 Player.
2. Press the Options soft key and select Add music from and to
select Add music from to add music from your Phone or Memory
card.
Media
88
T609.book Page 89 Monday, April 17, 2006 10:30 PM
3. Using the navigation keys, scroll through the list of music. Press
to check or uncheck individual songs, or check All to select all
songs.
4. When you are finished selecting songs, press the Add soft key.
The songs are added to your playlist.
♦Press the Back soft key to return to the MP3 Player.
♦Press the Options soft key to access your playlist options.
Playlist Options
From the playlist, press the Options soft key to access the following
options:
♦Play: allows you to listen to the currently highlighted song
from your playlist.
♦Add music from: allows you to add music from your Phone or
Memory card.
♦Change order: adjusts the order of songs in your playlist.
♦Remove: removes the selected MP3 from your current playlist.
This does not delete the music file.
♦Properties: allows you to view MP3 Name, Date, Format,
BitRate, Length, Size, and Protection.
Using the MP3 Player
Once you have created a playlist, you can use the MP3 Player to play
music:
1. Press Menu 6.2 to start the MP3 Player.
2. You can use the navigation keys to control the player:
Media
89
Media
♦Press to play or pause the current song.
♦Press Left to skip to the previous song in the playlist.
♦Press Right to skip to the next song in the playlist.
♦Press Up to open the playlist menu.
♦Press Down to stop the MP3 Player.
♦Use the side volume keys
to change the song volume.
T609.book Page 90 Monday, April 17, 2006 10:30 PM
MP3 Player Options
From the MP3 Player, press the Options soft key to access the
following options:
♦Play/Pause: allows you to listen/pause to the currently highlighted
song from your playlist.
♦Open play list: allows you to view your Music list and select other
songs.
♦Remove from playlist: removes the selected MP3 from your
current playlist.
♦Settings: allows you to set these settings; repeat mode, shuffle,
visualization, backlight, and volume.
♦Properties: allows you to view MP3 Name, Date, Format, BitRate,
Length, Size, and Protection.
Record audio
You can record audio clips (Menu 6.3). After recording, you can send
the audio clip to other people using Multimedia Messaging.
To record an audio clip
1. Press Menu 6.3.
2. To start recording, press the Options soft key followed by
Record.
3. Record a memo by speaking into the microphone.
4. When you are finished, press the Stop soft key. By default, the
audio clip is stored in your Voice List.
5. Press the Options soft key, and select one of the following
display:
♦Play: plays back your audio clip.
♦Record: discards the audio clip and enables you to record
another one.
♦Go to voice list: goes to your list of stored clips for playback.
Media
90
T609.book Page 91 Monday, April 17, 2006 10:30 PM
♦Send via: allows you to send the audio clip using a multimedia
message or to a compatible Bluetooth enabled device.
♦Delete: allows you to delete the audio clip.
♦Rename: allows you to change the name of the video.
♦Protection: prevents an audio clip from being accidentally
deleted. You must unprotect an audio clip before it can be
deleted.
♦Properties: shows the properties of the audio clip, such as
Name, Time, Format, Length, Size, and Protection.
Voice List
This menu shows all your audio clips. Scroll to an audio clip and
press the Options soft key. The following options are available:
♦Play: plays back your audio clip.
♦Send via: allows you to send the audio clip using a multimedia
message or to a compatible Bluetooth enabled device.
♦Move to memory card: moves the audio clip from your phone’s
memory to the memory card.
♦Copy to memory card: makes a copy of the audio clip onto the
memory card.
♦Delete: allows you to delete the audio clip.
♦Rename: allows you to change the name of the video.
♦Share for Bluetooth: allows the audio clip to be shared or released
for the use of another Bluetooth device.
♦Protection: prevents an audio clip from being accidentally deleted.
You must unprotect an audio clip before it can be deleted.
♦Properties: shows the properties of the audio clip, such as Name,
Date, Format, Length, Size, and Protection.
This menu (Menu 6.4) takes you to an online music store provided
by your service provider. Follow the online instructions shown on
your display screen.
Media
91
Media
Rogers Music Store
T609.book Page 92 Monday, April 17, 2006 10:30 PM
Voice recognition
The Voice recognition menu (Menu 6.5) allows you to control your
phone hands-free, using simple voice commands.
The following is a list of functions that you can perform using Voice
recognition speech recognition on your phone.
♦Call <Name or #>: dial by saying either a Name or a number in
your Contacts list
♦Send Text<Name>: send a text message to a number or to
someone in your Contacts list.
♦ Lookup <Name>: open the contact record for any name in your
Contacts list.
♦Go to <App>: open any application installed on your device.
Calling a Name or Number
Use the Call command to place a call. If the number you want to call
is stored in your contact list, you can say the contact name and,
optionally, which number (home, mobile, etc.) you want to call. If the
number is not in your contact list, you can say the number itself.
To call a name or number:
1. Start Voice recognition (Menu 6.5). You hear “Say a command.”
2. Say “Call” followed by the name of a person in your contact list,
and optionally, the number location (Home, Office, Mobile, etc.)
to call, or…
♦Say “Call” followed by a valid telephone number, or…
♦Say “Call” by itself to be prompted for a name or number.
Examples:
Call Angela Martinez
Call Tom Stewart at Office
Call Donna Harper's Mobile
Call 781-555-5200
Media
92
T609.book Page 93 Monday, April 17, 2006 10:30 PM
3. After you say a name or number, you might be prompted “Did you
say Call?” followed by the first of up to three names or numbers.
4. To confirm a name or number, wait for the beep and then say
“Yes.”
5. You can also choose the correct name or number from the choice
list by pressing the number next to the preferred choice, or by
selecting it using the phone's navigation keys. For information on
turning off choice lists, or customizing their behavior, see the
appendix, “Voice recognition Settings.”
6. If the phone recognizes a name that has more than one stored
number, it might prompt you “Which number?” Say the label for
the number you want, for example “Office,” “Home,” or “Mobile.”
Hints for Using Call
♦Wait for the beep before saying the command.
♦When saying a name, speak clearly and say the name of a person
in your contact list, first name followed by last name.
♦When saying a telephone number, pronounce each digit clearly and
distinctly but do not pause between the digits. Voice recognition
recognizes the digits one, two, three, four, five, six, seven, eight,
nine, zero, and “oh.” It does not recognize expressions such as
“one eight hundred.” Instead, say “one eight zero zero.”
♦If Voice recognition doesn't recognize numbers correctly, try
adapting digit dialing to your voice. To adapt digit dialing, choose
Digit Dialing’s Adapt Digits from the Voice recognition Settings
menu.
Use the Send Text command to send a text message to a specified
name in your contact list or a specified number.
To Send A Message
1. Start Voice recognition (Menu 6.5). You hear “Say a command.”
Media
93
Media
Sending a Message
T609.book Page 94 Monday, April 17, 2006 10:30 PM
2. Say “Send Text” or…
Say “Send Text” followed by a name or number
You can say…
Send Text (To be prompted to say the name or number)
Send Text to Kevin Harper
Send Text Angela Martinez at home
Send Text to 781 970-5200
3. If you did not specify a name or number, Voice recognition
prompts you “Say the name or number.” Say a name in your
contact list, or say a valid telephone number.
4. After you say a name or number, you might be prompted, “Did
you say?” To confirm a name or number, wait for the beep and
then say “Yes.”
You can also choose the correct name or number from the choice
list using the phone's navigation keys.
Looking Up a Contact
Use the Lookup command to look up contact information for any
person stored in your contact list.
To Look Up Contact Information
1. Start Voice recognition (Menu 6.5). You hear “Say a command.”
2. Say “Lookup” followed by the name of a person in your contact
list.
Examples:
Lookup Angela Martinez
Lookup Tom Stewart
Media
94
T609.book Page 95 Monday, April 17, 2006 10:30 PM
3. After you say a name, you might be prompted “Did you say
Lookup?” followed by the first of up to three names. To confirm a
name, wait for the beep and then say “Yes.” You can also choose
the correct item from the choice list using the phone's navigation
keys.
Opening an Application
♦Use the “Go To” command to open an application or access a
menu on your phone.
To Open An Application Or Access A Menu
1. Start Voice recognition (Menu 6.5). You hear “Say a command.”
2. Say “Go To” or…
Say “Go To” followed by the application you want to open or…
Say “Go To” followed by a menu item.
Examples:
Go To (To see a list of applications you can open)
Go To Calendar
Media
95
Media
Hints for using Go To
Wait for the beep before saying the command.
♦To see a list of applications/menu items you can open, say “Go
To” but do not specify a destination. Voice recognition displays a
list of valid destinations and prompts you with “Please Choose.”
You can then say the name of the application you want to open.
♦If the list is too long to fit on one screen, the screen will contain
the choice “Next Menu.” You can say one of the application or
menu names on the list, or say “Next Menu” to view the next
screen
T609.book Page 96 Monday, April 17, 2006 10:30 PM
Voice recognition settings
You can adjust the following Voice recognition options by pressing
the Settings soft key and selecting one of the following submenus:
Choice lists
If Voice recognition is not absolutely confident that it has correctly
identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one.
You can control when choice lists appear by changing the Choice
lists setting to:
♦Automatic: Voice recognition displays a choice list when it is not
confident it has identified the correct choice from among multiple
alternatives.
♦Always On: When there are multiple alternatives, Voice recognition
always displays a choice list.
♦Always Off: Voice recognition never displays a choice list. Instead,
the application picks the best from among the possible choices.
Sensitivity
In Voice recognition, “sensitivity” controls the balance between
rejecting too much, which means the phone frequently does not
recognize names, numbers, or commands, and rejecting too little,
which means it frequently recognizes something even if nothing was
said.
When Voice recognition rejects an utterance, it displays a message
such as “Please repeat…” or “No match found.” If you frequently
experience these messages, you might be able to get better
recognition by adjusting the Sensitivity setting toward Reject Less.
If you frequently experience false activations (Voice recognition
detects a wrong match), you might be able to get better performance
by adjusting the Sensitivity setting toward Reject More.
Digit dialing
Use the Digit dialing menu to adapt digit dialing to your voice.
Media
96
T609.book Page 97 Monday, April 17, 2006 10:30 PM
♦Adapt digits: Lets you adapt digits, which can improve voice
recognition of phone numbers. Adaptation takes about 60 seconds.
♦Reset digits: Erases any digit adaptation you have done and resets
digit recognition to the factory default. If you have not adapted
digits, this option is grayed out.
Sound
You can customize the Voice recognition user interface by turning
playback on or off for prompts, names, and numbers. You can also
change the speed and volume of name playback.
♦Prompts: Turns playback on or off for prompts such as “Please say
a command.”
♦Digits: Turns playback on or off for digits, for example, when
confirming a phone number.
♦Names: Turns playback on or off for names.
♦Names settings: Adjusts the speed and volume of name playback.
♦Speakerphone: Controls whether the speakerphone is always on
or off when voice recognition is started.
About
The About menu displays the software version of the voice
recognition software.
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer pictures, videos and songs between your
phone and a computer. For more information on Samsung PC
Studio 3, consult the online help provided with PC Studio 3.
Media
Media
97
T609.book Page 98 Monday, April 17, 2006 10:30 PM
Fun & Tunes
The Fun & Tunes menu (Menu 7) is used to manage your collection
of audio clips, graphics, downloaded video, and other files.
Ringtunes
In this menu (Menu 7.1), you can select a new ringtone from your
collection of pre-provided and downloaded ring tunes. In addition,
you can play your recorded audio clips.
Get Ring tunes
This menu allows you to download ring tunes from your service
provider. Follow the online instructions shown on your display
screen. Once you have downloaded ring tunes, they are added to
your phone’s list of ring tunes. See “Ringtunes” on page 98.
My sounds
This menu allows you to select audio clips that you have downloaded
from your service provider and play them, assign them as your ringer
or alarm tone, or to save them to your memory card.
Highlight an item in the My sounds menu and press the Options soft
key. The following options are available:
♦Download new: takes you to your Service Provider’s site where
you can download new sounds.
♦Play: plays the sound.
♦Send via: allows you to send the sound via Multimedia message or
Bluetooth.
♦Set as: allows you to set the sound as your Ringtone, a Caller
ringtone, or an Alarm tone.
♦Move to memory card: allows you to move the sound to your
memory card.
♦Copy to memory card: allows you to copy the sound to your
memory card.
♦Delete: allows you to delete the sound or delete all sounds.
Fun & Tunes
98
T609.book Page 99 Monday, April 17, 2006 10:30 PM
for the use of another Bluetooth device.
♦Protection: allows you to lock the sound to protect it from
deletion.
♦Properties: displays information about the sound, such as Name,
Date, Format, Size, and Protection.
Voice list
The Voice list contains your recorded audio clips. Highlight an item in
the Voice list menu and press the Options soft key. The following
options are available:
♦Play: plays the audio clips
♦Send via: allows you to send the audio clips via Multimedia
message or Bluetooth.
♦Move to memory card: allows you to move the audio clips to your
memory card.
♦Copy to memory card: allows you to copy the audio clips to your
memory card.
♦Delete: allows you to delete the audio clips or delete all audio clips.
♦Rename: allows you to change the name of the audio clips.
♦Share for Bluetooth: allows the audio clips to be shared or
released for the use of another Bluetooth device.
♦Protection: allows you to lock the audio clips to protect it from
deletion.
♦Properties: displays audio clip information, such as Name, Date,
Format, Size, and Protection.
Memory card
You can check the contents of your Sounds folder. Press the Options
soft key for the following options:
♦Create folder: allows you to create a new folder.
♦Memory card info: lists the Memory card capacity, used space,
and free space.
Fun & Tunes
99
Fun & Tunes
♦Rename: allows you to change the name of the sound.
♦Share for Bluetooth: allows the sound to be shared or released
T609.book Page 100 Monday, April 17, 2006 10:30 PM
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
For more information on downloading files from your PC to your
Memory card, contact your service provider.
Images
In this menu (Menu 7.2), you can select a new wallpaper image from
your collection of pre-provided and downloaded pictures. In addition,
you can send the images to other phones.
Get Graphics
Using the Get Graphics option, you can access your Service
Provider’s site where you can download new images.
My downloads
This menu allows you to access your downloaded images.
Scroll to the image you want to view. By pressing the Options soft
key you can access the following options:
♦Download new: takes you to your Service Provider’s site where
you can download new images.
♦View: displays the image.
♦Send via: allows you to send the image via Multimedia message or
Bluetooth.
♦Set as: allows you to set the image as Wallpaper or as a Caller ID.
♦Move to memory card: allows you to move the item to the memory
card.
♦Copy to memory card: allows you to copy the item to the memory
card.
♦Delete: allows you to delete the image.
♦Rename: allows you to change the name of the item.
♦Display mode: allows you to see your images displayed in a Line
view or in Thumbnail view.
Fun & Tunes
100
T609.book Page 101 Monday, April 17, 2006 10:30 PM
♦Slide show: allows you to see all of your photos in a slide show
for the use of another Bluetooth device.
♦Protection: allows you to lock the image to protect it from
deletion.
♦Properties: displays information about the image, such as Name,
Date, Format, Resolution, Size, and Protection.
My photos
In this menu you can review the photos you’ve taken. For more
information, see “My photos” on page 86.
Memory card
In this menu you can review the photos stored on your memory card.
See “Memory card” on page 103.
Videos
In this menu (Menu 7.3), you can view videos downloaded from the
web server or received in multimedia messages. The following
options are available:
Get Videos
Using the Get Videos option, you can access your Service Provider’s
site where you can download new videos.
Downloaded videos
This menu allows you to access your downloaded video clips.
Scroll to the video you want to view. By pressing the Options soft key
you can access the following options:
♦Play: plays the video.
♦Send via: allows you to send the video via Multimedia message or
Bluetooth.
♦Move to memory card: allows you to move the video to the
memory card.
Fun & Tunes
101
Fun & Tunes
presentation.
♦Share for Bluetooth: allows the image to be shared or released
T609.book Page 102 Monday, April 17, 2006 10:30 PM
♦Copy to memory card: allows you to copy the video to the memory
card.
♦Delete: allows you to delete the video.
♦Rename: allows you to change the name of the video.
♦Display mode: allows you to see your videos displayed in a Line
view or in Thumbnail view.
♦Share for Bluetooth: allows the video to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the video to protect it from deletion.
♦Properties: displays information about the video, such as Name,
Date, Format, Size, and Protection.
My videos
In this menu you can review the videos you’ve taken. For more
information, see “My videos” on page 87.
Memory card
In this menu you can review the videos stored on your memory card.
See “Memory card” on page 103.
Music
In this menu (Menu 7.4), you can view songs downloaded from the
Rogers MusicStore or copied from your computer onto your memory
card. The following options are available:
My music
This options allows you to access your songs stored on your phone
in your Music list. Press the Options soft key to select one of the
following options:
♦Play: plays the currently-highlighted song.
♦Send via Bluetooth: allows you to send the video via Bluetooth.
♦Add to playlist: adds the currently-highlighted song to your play
list. For more information, see “Creating your playlist” on page 88.
♦Set as: allows you to set the song as your Ringtone, Caller
ringtone or Alarm tone.
Fun & Tunes
102
T609.book Page 103 Monday, April 17, 2006 10:30 PM
♦Move to memory card: allows you to move the song to the micro
SD memory card.
♦Delete: allows you to delete the song.
♦Rename: allows you to change the name of the song.
♦Share for Bluetooth: allows the song to be shared or released for
the use of another Bluetooth device.
♦Protection: allows you to lock the song to protect it from deletion.
♦Properties: displays information about the song, such as Name,
Date, Format, Resolution, Size, Length, Quality, and Protection.
Memory card
Select this option to see the songs that you have saved to your
memory card. Press the Options soft key to select one of the
following options:
♦Play: plays the currently-highlighted song.
♦Send via Bluetooth: allows you to send the video via Bluetooth.
♦Add to playlist: adds the currently-highlighted song to your play
list. For more information, see “Creating your playlist” on page 88.
♦Set as: allows you to set the song as your Ringtone, Caller
ringtone or Alarm tone.
♦Move to: allows you to move the song to a new location on the
Phone or memory card.
♦Copy to: allows you to copy the song to a new location on the
Phone or memory card.
♦Delete: allows you to delete the song.
♦Rename: allows you to change the name of the song.
♦Create folder: allows you to create a new subfolder to organize
your music.
♦Protection: allows you to lock the song to protect it from deletion.
♦Properties: displays information about the song, such as Name,
Date, Format, Size, and Protection.
Fun & Tunes
103
Fun & Tunes
SD memory card.
♦Copy to memory card: allows you to copy the song to the micro
T609.book Page 104 Monday, April 17, 2006 10:30 PM
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
Other files
This option (Menu 7.5) allows you to view other types of files that
you have stored on your phone. This includes Excel spreadsheets,
text files, wmf files, PowerPoint presentations, PDFs, HTML, JPEGs,
GIFs, BMPs, and Word documents. You can send these files by
picture message or Bluetooth. You can also move or copy the files to
your memory card.
Memory card
You can check the contents of your memory card (Menu 7.6) and see
what has been saved there. Press the Up or Down navigation keys to
scroll between the Sounds, Images, Videos, Music, and Other files
folders.
After selecting a folder, press the Options soft key for the following
options:
♦Open: allows you to open the folder so you can access its contents.
♦Create folder: allows you to create a new folder.
♦Properties: lists the folder Name, Date, Format, Size, and
Protection.
♦Memory card info: lists the Memory card Capacity, Used space,
and Free space.
Note: The Memory card option will only appear if a micro SD memory card has been
inserted in your phone.
For more information on downloading files from your PC to your
Memory card, contact your service provider.
Fun & Tunes
104
T609.book Page 105 Monday, April 17, 2006 10:30 PM
Memory status
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer files between your phone and a computer. For
more information on Samsung PC Studio 3, consult the online help
provided with PC Studio 3.
Fun & Tunes
105
Fun & Tunes
This menu (Menu 7.7) shows the amount of memory for
photographs, video clips and audio clips. You can view the amount
memory used on both your Phone and any inserted Memory card.
The display shows you the total, free and used space including the
number of multimedia files you recorded and the total number of
multimedia files you can additionally create.
T609.book Page 106 Monday, April 17, 2006 10:30 PM
Contacts
You can store phone numbers and their corresponding names in
both your SIM card and phone’s memory. They are physically
separate but are used as a single entity, called your Contacts list
(Menu 8).
Storing a Number with a Name
There are two ways to store a number:
♦From Idle mode, entering a number and using the Options soft key
and selecting Save to contacts.
♦From the Contacts menu, using the Add new contact option
(Menu 8.2).
Storing a Number in Idle Mode
As soon as you start to enter a number, Options appears above the
left soft key to allow you to store the number in the Contacts list.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number, correct it using
details, see page 17.
. For further
2. When you are sure that it is correct, press the Options soft key.
3. Select Save to contacts. Select the memory location to store the
new contact, either Phone or SIM.
Note: When you change phones, any numbers stored in your SIM card memory are
automatically available with the new phone, whereas any numbers stored in the phone’s
memory must be reentered or transferred using the optional data kit accessory. However,
contacts stored on the phone may include additional details not available on the SIM
card.
Contacts
106
T609.book Page 107 Monday, April 17, 2006 10:30 PM
If you chose to save the new contact to the Phone, select the type
of the number to be stored: Mobile, Home, Office, Fax or Other.
To select the category, press the Up or Down key and press the
Select soft key.
If you chose to save the new contact to the SIM, skip this step.
4. Enter a name for your contact. For further details about entering
characters, see “Entering Text” on page 29.
♦To add an email address for this contact, scroll down to Email.
Enter the email address.
press . Select Take picture to get a new photo or select a
Picture ID category. Highlight the desired image and press .
♦To add a custom ringtones, scroll down to Ringtone and
press . Select a Ringtone category. Highlight the desired
ringtone and press .
♦To add this contact to a group, scroll down to Group and press
. For more information, see “Adding a contact to the Group”
on page 111.
♦To add a note for this contact, scroll down to Memo. Enter the
email address.
5. When you are finished, press the Save soft key.
Storing a Number Using the Contacts Menu
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or the
key.
3. Scroll to Add new contact by pressing the Up or Down key and
press the Select soft key.
4. Select a memory location, either SIM or Phone, by pressing the
Up or Down key and press the Select soft key. Email address can
only be saved in the phone.
Contacts
107
Contacts
♦To add a custom picture ID, scroll down to Picture ID and
T609.book Page 108 Monday, April 17, 2006 10:30 PM
5. If you chose to save the new contact to the Phone, select the
category of the number to be stored. If you chose to save the new
contact to the SIM, skip this step.
Note: You can also store e-mail addresses in your Contacts list by selecting the e-mail
category.
6. Enter a name and press Down.
For further details about entering characters, see “Entering Text”
on page 29.
7. Enter the number you want to store and press the Save soft key.
To
use the entry options
Press the
Options soft key. See the next section
for the options available.
return to the idle screen
key.
Contacts list
The Contacts list (Menu 8.1) displays all your stored phone numbers
located in both your phone’s memory and your SIM card. While
accessing any Contacts list entry, press the Options soft key to
access the options for the entry.
To
view the highlighted
Contact
scroll up or down the
Contacts list
Contacts
108
Press the
key
Up or Down key until the option you want
highlights.
T609.book Page 109 Monday, April 17, 2006 10:30 PM
To
call the highlighted
Contact
Press the
key
Dialing a Number from the Contacts list
Once you have stored phone numbers in the Contacts list, you can
dial them easily and quickly by using the location numbers that were
assigned to them in the Contacts list.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number of the number you want
to dial and press the # key.
The list of the entries in the SIM card appears. If necessary, scroll
through the list using the Up or Down key.
2. When the number displays, press the Dial soft key or
key.
Dialing a Number from the Phone’s Memory
1. In Idle mode, press and hold the 0 key. A + appears.
Contacts
109
Contacts
When viewing a contact, the following options are available:
♦Edit: allows you to view/edit the name and contact information.
♦Send message: allows you to send a Text or Multimedia message
to the currently selected contact.
♦Copy: allows you to copy the selected contact to another location
(phone or SIM card)
♦Send via: allows you to send the contact information as a Text or
Multimedia message or to a compatible Bluetooth-enabled device.
♦Delete: allows you to delete the selected number from Phone
Book. You are asked to confirm that you wish to delete the name
and number by pressing the Yes soft key.
T609.book Page 110 Monday, April 17, 2006 10:30 PM
2. Enter the location number of the number you want and press the
# key.
3. The list of the entries in the phone’s memory appears.
If necessary, scroll through the list using the Up or Down key.
4. When the number displays, press the Dial soft key or
key.
Searching for and Dialing a Number in the Contacts
list
After storing numbers in the Contacts list, you can search for them in
two ways; by name and by caller group.
Searching for a Number by Name
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Select Contacts list and press the Select soft key or
key.
4. Enter the first few letters of the name that you want to find. The
Phone Book entries are listed, starting with the first entry
matching your input.
To
view the highlighted entry
Press the
key.
select a different entry
Up or Down navigation key until the
entry you want highlights.
look for a name starting
with a different letter
key labeled with the letter you want.
Contacts
110
T609.book Page 111 Monday, April 17, 2006 10:30 PM
5. Once you have found the entry, press the
key to dial the
number, or press the Options soft key to access the Phone Book
entry options.
Group
Adding a contact to the Group
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Group by pressing the Up or Down navigation key and
press the
key.
4. Highlight the desired group that you wish to add the contact to
and press the
key.
Contacts
111
Contacts
You can organize your contacts into groups such as Family, Office
and Friends. Once contacts are organized into groups, you can send
Text and Multimedia messages to all members of a group
simultaneously. Additionally, you can assign a unique Picture ID or
ringtone to the group.
From the Group menu (Menu 8.3), press the Options soft key to
access the following options:
♦View: allows you to view the contacts in the group.
♦Add: allows you to add a new group.
♦Edit: allows you to edit the highlighted group. In the Group edit
screen, you can edit the name of the group, as well as the
graphics and ringtones associated with the group. See “Ringtunes”
on page 98 and “Images” on page 100 for further information
about setting ringtones and graphics.
♦Send message: allows you to send a Text or Multimedia message
to the group members.
♦Delete: allows you to delete all the groups or just the highlighted
group.
T609.book Page 112 Monday, April 17, 2006 10:30 PM
5. Press the Options soft key and select Add. Your Contacts list is
displayed.
6. To add a contact to the group, highlight the desired contact and
press
to check/uncheck the contact. Repeat for any additional
contacts that you wish to add.
7. When you have finished, press the Select soft key.
8. When you are finished, press the Back soft key or
to the Idle screen.
key to exit
Creating a new Group
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Group by pressing the Up or Down navigation key and
press the
key.
4. Press the Options soft key and select Add.
5. Enter the name of the new group.
♦To add a custom Picture ID to the group, press Down to
Picture ID and press
.
♦To add a custom ringtone to the group, press Down to
Ringtone and press
.
6. When you are finished, press the Save soft key.
7. When you are finished, press the Cancel soft key or
exit to the Idle screen.
key to
Speed dial
You can assign up to eight phone numbers from Contacts list that
you use most frequently to the number keys (2 to 9), and then dial
Contacts
112
T609.book Page 113 Monday, April 17, 2006 10:30 PM
them easily whenever you want, simply by pressing and holding the
associated number key.
Setting up Speed-dial Entries
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Speed dial by pressing the Up or Down navigation key
and press the Select soft key or the
key.
Using the navigation keys, select a number from the onscreen
keypad to assign the speed dialling number, and press the
Options soft key followed by the Add soft key.
Note: Memory location 1 is reserved for your Voice Mail server number.
5. Select an entry from the list and press the Select soft key.
6. Press the Select soft key to save this entry in the speed dial list.
soft key. To edit the
7. When you are finished, press the
number use the following options by pressing the Options soft
key:
♦View: allows you to view the number assigned to the key. You
can dial the number by pressing the key.
♦Change: allows you to assign a different number to the key.
♦Remove: allows you to clear the setting so that no number is
assigned to the key.
Contacts
113
Contacts
4. A virtual representation of your keypad appears onscreen.
Existing speed dial entries appear within their associated key.
T609.book Page 114 Monday, April 17, 2006 10:30 PM
Using Speed dial
♦In Idle mode, to speed-dial the numbers assigned to the 2 to 9
keys, press and hold the appropriate key.
My name card
This function is similar to an entry in the Phone Book, except that it
contains your contact information, like a business card. You can send
the name card to others via a text or multimedia message.
You can assign a name to each of your own phone numbers
registered on your SIM card.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to My name card by pressing the Up or Down navigation
key and press the Select soft key or
key.
See “Storing a Number with a Name” on page 106 for information
about entering contact information.
Own number
This function is a memory aid, which you can use to check your own
phone number if you need to do so. You can assign a name to each of
your own phone numbers registered on your SIM card.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Own number by pressing the Up or Down navigation key
and press the Select soft key or
key.
4. Highlight the number you want to view by pressing the Up or
Down navigation key. The number type is displayed.
Contacts
114
T609.book Page 115 Monday, April 17, 2006 10:30 PM
Management
The Management menu allows you to select where your contacts will
be saved, copy your SIM contacts to your phone, sort your contacts,
delete your contacts, or check your memory status.
Default saving
Copy all to phone
This option allows you to copy all contacts from your SIM card to
your phone. When you copy entries to the phone, duplicate entries
are created in your Phonebook.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Highlight Management and press the Select soft key or the
key.
4. Highlight Copy all to phone and press the Select soft key or the
key.
5. After receiving the Copy all to phone? confirmation message,
press the Yes soft key.
Note: Options are available for entries stored to your phone that are not available when
stored to the SIM card. For details, see the note on page 106.
Contacts
115
Contacts
The Default saving option allows you to choose where your contacts
will be saved. The following options are available:
♦Phone: new phonebook contacts will be saved to your phone.
♦SIM card: new phonebook contacts will be saved to your SIM
card.
♦Ask on saving: you will be prompted to choose between Phone or
SIM card whenever you save a new contact.
T609.book Page 116 Monday, April 17, 2006 10:30 PM
Sort by contacts
This options allows you to have your contacts sorted by First name
or Last name.
Note: Contacts stored to your SIM card do not have first and last names as separate
fields. Therefore, they will be sorted on the first letter of the name entered in the Name
field.
Delete all
This option allows you to delete your contacts. You may delete from
All, Phone, or SIM card. To delete entries:
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Contacts and press the Select soft key or
key.
3. Scroll to Management by pressing the Up or Down navigation
key and press the Select soft key or
key.
4. Scroll to Delete All by pressing the Up or Down navigation key
and press the Select soft key or
key.
5. To place a check mark by the memory you want to empty, All,
Phone, SIM or SIM(FDN), press the
key.
You can remove the check mark by pressing the
key again.
6. When you are finished marking, press the Delete soft key to
delete the entries in the selected memory.
7. Enter the phone password and press the OK soft key.
The password is preset to “00000000” at the factory. To change this
password, see “Change password” on page 134.
8. When a confirming message appears, press the Yes soft key.
To cancel the deletion, press the No soft key.
9. When you are finished, press the
Contacts
116
key.
T609.book Page 117 Monday, April 17, 2006 10:30 PM
Note: Once contact entries have been deleted, they cannot be recovered.
Memory status
You can check how many names and numbers are stored in the
Phonebook, in both SIM card and the phone memory. You can also
see the capacity of both memories. Your phone memory can hold up
to 1000 contacts and your SIM card can hold up to 250 contacts.
1. In Idle mode, press the Menu soft key. Select Contacts and
press the Select soft key or
key.
2. Scroll to Management by pressing the Up or Down navigation
key and press the Select soft key or
key.
3. Select the Memory status option by pressing the Up or Down
navigation key and press the Select soft key or
key.
4. When you are finished, press the Back soft key.
Service number
You can view the list of Service Dialing Numbers (SDN) assigned by
your service provider. These numbers include emergency numbers,
directory enquiries and voice mail numbers.
1. In Idle mode, press the Menu soft key. Select Contacts and press
the Select soft key or
key.
2. Scroll to Service Number by pressing the Up or Down navigation
key and press the Select soft key or
key.
Contacts
117
Contacts
Checking the Memory status
You can check how many names and numbers are stored in Phone
Book, in both the SIM card and phone’s memory. You can also see
the capacity of both memories.
T609.book Page 118 Monday, April 17, 2006 10:30 PM
3. Scroll through the numbers by using the Up or Down navigation
key.
4. To dial the number displayed, press the Dial soft key.
Note: This option is available only when your SIM card supports Service Dialing
Numbers.
Samsung PC Studio 3
Your phone comes with Samsung’s PC Studio 3 software, which
allows you to transfer Contacts between your phone and a computer.
For more information on Samsung PC Studio 3, consult the online
help provided with PC Studio 3.
Contacts
118
T609.book Page 119 Monday, April 17, 2006 10:30 PM
Settings
Many different features of your phone can be customized to suit your
preferences. All of these features are accessed in the Settings menu
(Menu 9).
Time & Date
Use this menu (Menu 9.1) to configure the settings for the time and
date display.
1. In Idle mode, press the Menu soft key to access the menu.
2. Select Settings and press the Select soft key or the
key.
3. Select Time & Date and press the Select soft key or the
key.
4. Select the setting you wish to change. Press the Up or Down
navigation keys to switch between options.
♦Set time: You can enter the current time. Use the numeric
if the Time Format is set to 12 Hours. Press Left or Right
navigation key to switch between AM and PM.
♦Time format: You can change the time format to 12 hours or
24 hours. Press Left or Right navigation key to switch between
time formats.
♦Set date: You can enter the month, day, and year. Use the
numeric keypad to type in the time.
♦Date format: You can change the order that the year, month
and date is displayed in.
♦Auto update: You can receive time information from your
service provider’s network.
• Off: you need to manually set the time and date according to the
current time zone using the Set Time menu.
• On: the phone automatically updates the time and date according
to the current time zone using the network service.
Settings
119
Settings
keypad to type in the time.
♦AM/PM: You can select either AM or PM for the current time,
T609.book Page 120 Monday, April 17, 2006 10:30 PM
• Confirm first: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date does not change the time you have set for
alarm settings or calendar memos.
Phone settings
Use this menu (Menu 9.2) to configure the settings for how the
phone operates.
Language
You can select a display language: Automatic, English, or Français.
When the language option is set to Automatic, the language is
automatically selected according to the language of the SIM card
used.
Greeting message
This menu allows you to set a greeting to be displayed briefly when
the phone is switched on.
To
Press the
clear the existing
message
key and hold it down until the message
is cleared.
enter a new message
appropriate alphanumeric keys.
change the text input
mode
right soft key.
For further details, see “Entering Text” on page 29.
Settings
120
T609.book Page 121 Monday, April 17, 2006 10:30 PM
Volume Key
This menu allows you to set the function of the Volume key when
receiving a call. You have two choices:
♦Mute: pressing the Volume key will mute the ringer.
♦Reject: pressing the Volume key will reject the call, sending it
straight to Voice mail.
Extra settings
You can turn the automatic redialling or answering features on or off.
To turn a feature
Press the
on
On soft key.
A check mark displays in front of the option.
off
Off soft key.
The check mark no longer displays.
key to turn features on or off.
The following options are available:
♦Auto redial: when this option is checked, the phone makes up to
ten attempts to redial a phone number after an unsuccessful call.
Note: The interval between two attempts varies.
♦Anykey answer: when this option is checked, you can answer an
incoming call by pressing any key, except the
key and the
Reject soft key. To reject the call, press the
key or the Reject
soft key. When this option is unchecked, you can only press the
key or Accept soft key.
♦Open to answer: when this option is checked, you can simply open
the folder to answer a call. When it is unchecked, you must open
Settings
121
Settings
Note: You can also press the
T609.book Page 122 Monday, April 17, 2006 10:30 PM
the folder and press a key to answer a call, depending on the
setting of the Anykey Answer option.
Display settings
In this menu (Menu 9.3), you can change various settings for the
display or backlight.
Wallpaper
This menu allows you to change the background image or the color
of the text to be displayed in Idle mode.
The following options are available:
♦Get more wallpaper: this option takes you to an online page where
you can download wallpapers.
♦Default wallpapers: allows you to choose from a list of wallpapers
included with your phone.
♦My downloads: allows you to choose a photo from your
downloaded images folder.
♦My photos: allows you to choose a photo from My photos folder.
To change the background image:
1. Scroll through the list by pressing the Navigation keys and select
an image.
2. Press the Select soft key or the
key.
3. The image will be saved as your wallpaper.
Info display
This menu allows you to change the background image or the color
of the text to be displayed in Idle mode.
The following options are available:
♦Text style: you can specify the visual style of text on the Idle
screen (Outline, Shadow, or Normal).
♦Text color: you can select the color of the text to be displayed on
the Idle screen (While, Yellow, Blue, Green, Red, or Black).
Settings
122
T609.book Page 123 Monday, April 17, 2006 10:30 PM
Interior display
This menu allows you to change the color of the menus. To select a
color, select the pattern using the Up or Down navigation keys and
press the OK soft key.
LCD brightness control
You can adjust the display brightness to see it better in different
lighting conditions.
Press the Left or Right navigation keys or press the Volume keys to
adjust the brightness. To accept the changes, press the OK soft key.
Front LCD contrast control
You can adjust the contrast of the external display screen.
Press the Left or Right navigation keys or press the Volume keys to
adjust the contrast. To accept the changes, press the OK soft key.
Backlight
Dialing display
This menu allows you to select the size and color of your dialing font,
as well as your screen’s background color.
To change the size of the font:
1. Highlight Font size and press the Select soft key or the
key.
2. Use the Left or Right navigation key to select between Large,
Medium, or Small.
Settings
123
Settings
You can select the length of time the backlight is on. The backlight
turns on when you press a key or receive a call or message and
remains on for the specified length of time.
Press the Up or Down navigation key to switch between options:
♦On: Press the Left or Right navigation keys to change the time
that the screen remains fully lit.
♦Dim: Press the Left or Right navigation key to change the time
that the screen remains on but not fully lit.
T609.book Page 124 Monday, April 17, 2006 10:30 PM
3. Press the Save soft key or the
key to save your change.
Otherwise, press the Back soft key.
To change the color of the font:
1. Highlight Font color and press the Select soft key or the
key.
2. Use the Left or Right navigation key to select either Basic (black),
Rainbow, or Monochrome.
3. Press the Save soft key or the
key to save your change.
Otherwise, press the Back soft key.
To change the color of the background:
1. Highlight Background color and press the Select soft key or the
key.
2. Use the Left or Right navigation key to select your desired color.
3. Press the Save soft key or the
key to save your change.
Otherwise, press the Back soft key.
Sound settings
You can use the Sound Settings menu (Menu 9.4) to customize
various settings, such as the:
♦ring melody, volume and type.
♦sounds made when you press a key, receive a message, open/
close the folder or switch your phone on or off.
♦alert tone made every minute during a call, when you make an
error or when your call is connected.
Incoming call
This menu allows you to select a ring melody for incoming calls. You
can choose between many different melodies. If you have
downloaded additional ring tunes, you can access them in this menu.
Settings
124
T609.book Page 125 Monday, April 17, 2006 10:30 PM
Press Up or Down to select an option and press Right or Left to scroll
through the choices. When you are finished, press the Save soft key
or .
♦Get Ring tunes: allows you to download new ring tunes from your
online service provider.
♦Ringtone: This option allows you to select a ring melody. Highlight
RingTone and press the
key. Use the Up or Down key and select
My sounds, Music, or Default sounds. Then use the
key to
select a ringtone.
♦Volume: This option allows you to adjust the ring volume. Use the
Right or Left navigation key to increase or decrease the volume.
♦Alert Type: This option allows you to specify how you are to be
informed of incoming calls. Use the Right or Left navigation key to
select a ring tone. The following options are available:
● Melody: the phone rings using the ring melody selected in the
Ringtone menu.
● Vibration: the phone vibrates but does not ring.
● Vibration then melody: the phone vibrates 3 times and then
starts ringing.
This menu allows you to select the tone that the phone sounds when
you press a key. Press Up or Down to select an option and press
Right or Left to scroll through the choices. When you are finished,
press the Save soft key or .
♦On/Off: Switches the keypad tone on or off.
♦Keytone: Selects the type of keytone. Choose between DTMF,
Beep, Voice, Simple or Xylophone.
♦Volume: This option allows you to adjust the ring volume. Use the
Right or Left navigation key to increase or decrease the volume.
Message tone
This menu allows you to select how the phone informs you that a
new message has been received. You can select a different type of
tone for different kinds of messages.
Settings
125
Settings
Keypad tone
T609.book Page 126 Monday, April 17, 2006 10:30 PM
For each type of message tone (Text message, Multimedia message
or Broadcast), the following options are available:
♦Tone: you can select a message tone: MSG Tone1 to MSG Tone10.
♦Alert Type: you can select a type of message alert.
● Melody: the phone sounds the selected message tone.
● Vibration: the phone vibrates.
● Vibration then melody: the phone vibrates, and then plays the
selected message tone.
● Off: the phone does not use the message tone.
♦Repetition: you can select how often the phone informs you of a
new message.
● Once: the phone alerts you to a new message just once at the
time of its receipt.
● Every 1 min.: the phone alerts you to a new message every
minute until you open the message.
● Every 2 min.: the phone alerts you to a new message every 2
minutes until you open the message.
Press Up or Down to select an option and press Right or Left to scroll
through the choices. When you are finished, press the Save soft key
or .
Power on/off
This menu allows you to select the melody that the phone sounds
when it is switched on and off. Select either Tone 1 or Tone 2. To turn
the sound off, select Off. When you are finished, press the Save soft
key or .
Folder tone
This menu allows you to select the tone that the phone sounds when
you open or close the folder. Select one of the provided tones. To turn
the sound off, select Off. When you are finished, press the Save soft
key or .
Settings
126
T609.book Page 127 Monday, April 17, 2006 10:30 PM
Silent mode
This menu allows you to enable or disable vibration when the phone
is in quiet mode. Select either Vibration or Mute. When you are
finished, press the Save soft key or .
Extra tones
You can customize additional tones used for the phone.
To turn a given tone
Press the
on
On soft key. A check mark displays in front
of the option.
off
Off soft key. The check mark no longer
displays.
Note: You can also press the
key to turn features on or off.
Network services
Use this menu (Menu 9.5) to customize the settings for network
features, such as call forwarding, call barring, and call waiting.
Settings
127
Settings
The following options are available:
♦Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the length
of your call.
♦Connection tone: sets whether or not your phone beeps when
your call is connected.
♦Alerts on call: indicates you have a scheduled alert when you are
on the phone.
When you are finished, press the Save soft key or .
T609.book Page 128 Monday, April 17, 2006 10:30 PM
Call forwarding
Call forwarding enables incoming calls to be rerouted to a number
that you specify. For example, you could forward your business calls
to a colleague while you are on holidays.
You can use the following options to forward voice calls and/or data
calls:
♦Forward always: all calls are forwarded.
♦Busy: calls are forwarded when you are already on another call.
♦No reply: calls are forwarded when you do not answer the phone.
♦Unreachable: calls are forwarded when you are not in an area
covered by your service provider.
♦Cancel all: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or Down
navigation key, and then press the Select soft key.
2. Select the type of calls, Voice Calls or Data Calls, by pressing
the Up or Down navigation key, and then press the Select soft
key.
The current status displays. If the option has already been set, the
number to which the calls are forwarded displays.
To
Select
activate call forwarding
Activate
deactivate call forwarding
Deactivate
3. In the Forward to field, enter the number to which the calls are to
be forwarded and press the Select soft key.
To enter an international code, press the 0 key until the + sign
displays.
Settings
128
T609.book Page 129 Monday, April 17, 2006 10:30 PM
The phone sends your settings to the network and the network’s
acknowledgement displays.
You can deactivate all call forwarding settings by selecting the
Cancel all option.
Call barring
To set your call barring options:
1. Select the type of calls you want to bar by pressing the Up or
Down navigation key, and then press the Select soft key.
2. Select whether you want to bar Voice Calls or Data Calls, and
then press the Select soft key.
The screen informs you whether call barring is activated or
deactivated.
3. Activate or deactivate the call barring feature as necessary by
selecting either Activate or Deactivate.
Settings
129
Settings
The Call Barring service allows you to restrict different types of calls
from being made or received. For example, you could restrict all
voice calls being made to International phone numbers. For each
option, you can restrict whether to ban voice calls or data calls.
The following call-barring options are available:
♦All outgoing: bars this phone from making outgoing calls.
♦International: bars this phone from making calls to international
numbers.
♦International except to home: bars this phone from making
international calls except to home.
♦All receiving: blocks all incoming calls.
♦Incoming while abroad: blocks all incoming calls when abroad
♦Cancel all: clears your call barring options.
♦Change barring password: allows you to change the password
used to set your call barring options.
T609.book Page 130 Monday, April 17, 2006 10:30 PM
4. Enter your phone password. For more details about your phone’s
password, see See “Change password” on page 134.
♦To return to the previous screen, press the Back soft key.
♦You can also deactivate all call barrings by selecting the Cancel
All option.
Call waiting
The Call Waiting service informs you when someone is trying to
reach you during another call. You can specify individual call waiting
option for voice calls and/or data calls:
To set your call waiting options:
1. Select the type of calls, voice or data, to which you want to apply
the call waiting option by pressing the Up or Down navigation
key, and then press the Select soft key.
The screen informs you whether call waiting is activated or
deactivated.
2. You can activate or deactivate the call waiting feature as
necessary by selecting either Activate or Deactivate.
To return to the previous screen, press the Back soft key.
You can also deactivate all call waiting settings by selecting the
Cancel All option.
Network selection
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
Note: You can select a network other than your home network only if there is a valid
roaming agreement between them.
To manually connect to a network when roaming:
Settings
130
T609.book Page 131 Monday, April 17, 2006 10:30 PM
1. Highlight the Search now option and press the Select soft key or
the
key.
2. Press the Up or Down Navigation key until the network you want
highlights and then press the Select soft key or the
key.
The phone will scan for that network and you will be connected.
To change you Default setup:
1. Highlight Default setup and press the Select soft key or the
key.
2. In the Network Selection menu, select either Automatic or
Manual and press the OK soft key.
If you select Automatic, you are connected to the first available
network when roaming.
3. Press the Up or Down navigation keys until the network you
want is highlighted and then press the OK soft key.
You are connected to that network.
Caller ID
You can prevent your phone number from being displayed on the
phone of the person being called.
Note: Some networks do not allow the user to change this setting.
The following options are available:
♦Default: the default setting provided by the network is used.
♦Hide number: your number does not display on the other person’s
phone.
Settings
131
Settings
If you select Manual, the phone scans for the available
networks. Go to step 3.
T609.book Page 132 Monday, April 17, 2006 10:30 PM
♦Send number: your number is sent each time you make a call.
Bluetooth
Bluetooth (Menu 9.6) is a short-range wireless communications
technology capable of exchanging information over a distance of
about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of one
another, you can exchange information between them, even if they
are located in different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
This option allows you to turn Bluetooth On or Off. Make a selection
and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth devices. Highlight
Search new device and press the Select soft key or the
key. The
phone will search for available devices.
My phone’s visibility
This option allows you to turn your visibility to On or Off. Make a
selection and press the Select soft key or the
key.
My phone’s name
This option shows the name given to your phone for Bluetooth
purposes. You can edit the name if needed.
Security modes
This option allows you to set your security modes to On or Off. Make
a selection and press the Select soft key or the
key.
Settings
132
T609.book Page 133 Monday, April 17, 2006 10:30 PM
Bluetooth services
The Bluetooth specification is a protocol that describes how the
short-range wireless technology works, whereas individual profiles
describe the services supported by individual devices. Profiles
reduce the chance that different devices will not work together.
The following Service profiles are available:
♦Headset: The remote Bluetooth headset enables outgoing and
incoming calls.
♦Handsfree: The remote Bluetooth car kit enables outgoing and
incoming calls.
♦Serial port: The remote Bluetooth device acts as a virtual serial
port.
♦Dial up networking: The remote Bluetooth device enables Internet
access through a phone modem.
♦File transfer: The remote Bluetooth device enables users to
transfer files from their handset to others.
♦Object push: The remote Bluetooth device enables the transfer of
personal data (e.g. vCard, vCalendar, etc.) to other devices.
The Security menu (Menu 9.7) enables you to restrict the use of
your phone to others and the types of calls.Various codes and
passwords are used to protect the features of your phone. They are
described in the following sections. Also see “Access Codes” on
page 141.
PIN Check
When the PIN Check feature is enabled, you must enter your PIN
each time you switch the phone on. Consequently, any person who
does not have your PIN cannot use your phone without your
approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
Settings
133
Settings
Security
T609.book Page 134 Monday, April 17, 2006 10:30 PM
♦Disable: the phone connects directly to the network when you
switch it on.
♦Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN to a new one,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one. Once you have entered
a new PIN, you are asked to confirm it by entering it again.
Phone lock
When the Phone Lock feature is enabled, the phone is locked and you
must enter an 8-digit phone password each time the phone is
switched on.
The password is preset to “00000000” at the factory. To change the
phone password, see the Change Password menu (Menu 9.6.4)
below.
Once the correct password has been entered, you can use the phone
until you switch it off.
The following options are available:
♦Disable: you are not asked to enter the phone password when you
switch the phone on.
♦Enable: you are required to enter the phone password when you
switch the phone on.
Change password
The Change Password feature allows you to change your current
phone password to a new one. You must enter the current password
before you can specify a new one.
The password is preset to “00000000” at the factory. Once you have
entered a new password, you are asked to confirm it by entering it
again.
Settings
134
T609.book Page 135 Monday, April 17, 2006 10:30 PM
Privacy
Using this menu, your phone’s menus become password-protected,
although you can make calls normally. Contacts, downloaded
content, phone settings and stored messages are all protected. Once
you have enabled privacy, you must enter the phone password to
access the menus. When the phone asks for the phone password,
enter the password and press the OK soft key.
The following options are available:
♦Disable: you can access the menus normally.
♦Enable: you can access the menus only after entering your
password.
Note: The password is preset to “00000000” at the factory. To change this password, see
page 134.
SIM lock
FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM card,
allows you to restrict your outgoing calls to a limited set of phone
numbers.
The following options are available:
♦Disable: you can call any number.
♦Enable: you can only call phone numbers stored in the FDN
address book. The FDN address book is a separate address book
and is managed separately from the normal Address Book.Address
Book. You must enter your PIN2.
Settings
135
Settings
When the SIM lock feature is enabled, your phone only works with
the current SIM card.
♦To enable the SIM lock, you must enter the current SIM lock code.
Once you have entered the SIM lock code, you must confirm by
entering it again.
♦To unlock your SIM card, you must re-enter the SIM lock code.
T609.book Page 136 Monday, April 17, 2006 10:30 PM
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display. Furthermore, PIN2 is specific to a SIM card and you will need to ask the issuer of
the SIM card for the PIN2 code.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a
new one. You must enter the current PIN2 before you can specify a
new one. Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display.
Connection settings
You can customize the profiles (Menu 9.8) containing the settings
for connecting your phone to the network. These settings are used
for the Internet browser, Instant Messaging (IM) and sending
multimedia messages.
Note: Your phone connects to the network by default. If you change the multimedia
settings without first checking with your service provider, the Internet and multimedia
features may not work properly.
Select the profile you want, press the Options soft key, and select
View to review or edit the current profile or Add new connection to
create an additional profile. For each profile, the following options are
available:
♦Profile name: enter a name that you wish to assign to the HTTP
proxy server.
♦Home URL: set the address of your startup homepage. When the
default homepage displays, you can delete it using the
key and
enter your own choice.
Settings
136
T609.book Page 137 Monday, April 17, 2006 10:30 PM
♦Proxy: Enable or disable the WAP gateway address required to
connect to the Internet.
♦IP address: enter the WAP gateway address required to connect to
the Internet.
♦Port: enter the Proxy port required to connect to the Internet.
♦DNS: Enable or disable DNS for connection to the Internet.
●
DNS1/2: IP address of the DNS server.
♦Bearer: select the bearer to be used for each type of network
address accessed: GPRS or GSM.
♦Advanced settings: The following options are available in the
Advanced setting submenu, depending on the type of Bearer
configured:
• GPRS
• APN: enter the access point name used for the address of the
GPRS network gateway.
• Login ID: enter the Login ID required to connect to the GPRS
network.
GPRS network.
• GSM
• Dial number: enter the server phone number.
• Login ID: enter the Login ID required to connect to the GSM
network.
• Password: enter the password required to connect to the GSM
network.
• Data call type: select the data call type: ISDN or Analog.
Settings
137
Settings
• Password: enter the password required to connect to the
T609.book Page 138 Monday, April 17, 2006 10:30 PM
Voice recognition settings
You can adjust the settings and preferences for VoiceSignal by
opening the Voice recognition settings menu (Menu 9.9).
To access the VoiceSignal Settings menu:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the
Select soft key or the
key to enter the menu.
3. Highlight Voice recognition settings and press the Select soft
key or the
key.
Note: You can also access the VoiceSignal Settings menu, while in the VoiceSignal
application by pressing the Settings soft key.
The following options are available:
♦Choice lists: if VoiceSignal is not absolutely confident that it has
correctly identified a name or number, it can display a choice list of
up to three possibilities, and prompt you to confirm the correct
one. You can control when choice lists appear by changing the
Choice Lists setting to the following:
● Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
● Always On: when there are multiple alternatives, VoiceSignal
always displays a choice list.
● Always Off: VoiceSignal never displays a choice list. Instead, the
application picks the best from among the possible choices.
♦Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone frequently
does not recognize names, numbers, or commands, and rejecting
too little, which means it frequently recognizes something even if
nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match
found.” If you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity setting
Settings
138
T609.book Page 139 Monday, April 17, 2006 10:30 PM
Reset settings
You can easily reset your phone to its default settings. To reset your
phone:
1. Select one or more of the following reset options:
♦All: resets all configuration options to their default values.
♦Phone settings: resets only phone options to their default values.
Settings
139
Settings
toward Reject Less. If you frequently experience false activations
(VoiceSignal detects a wrong match), you might be able to get
better performance by adjusting the Sensitivity setting toward
Reject More.
♦Digit dialing: use the Digit Dialing menu to adapt digit dialing to
your voice.
● Adapt digits: lets you adapt digits, which can improve voice
recognition of phone numbers. Adaptation takes about 60
seconds.
● Reset digits: erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
♦Sound: you can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and numbers. You
can also change the speed and volume of name playback.
● Prompts: turns playback on or off for prompts such as “Please
say a command.”
● Digits: turns playback on or off for digits, for example, when
confirming a phone number.
● Names: turns playback on or off for names.
● Name settings: adjusts the speed and volume of name
playback.
● Speakerphone: Controls whether the speakerphone is always
on or off when voice recognition is started.
♦About: displays information about VoiceSignal including version
number, build number, and device number.
T609.book Page 140 Monday, April 17, 2006 10:30 PM
♦Display settings: resets only display options to their default
values.
♦Sound settings: rests only sound options to their default values.
2. Press the Reset soft key.
3. Enter the 8-digit phone password and press the Yes soft key.
Note: : The password is preset to “00000000.” To change this password, see page 134
Settings
140
T609.book Page 141 Monday, April 17, 2006 10:30 PM
Access Codes
There are several access codes that are used by your phone and its
SIM card. These codes help you protect the phone against
unauthorized use.
When requested for any of the codes explained below, enter the
appropriate code (displayed as asterisks) and press the OK soft key.
If you make a mistake, press
one or more times until the
incorrect digit is cleared and then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes, can be
changed using the Security menu (Menu 9.7). See page 139 for
further details.
Important! Avoid using access codes resembling emergency
numbers, such as 911, so that you do not accidentally
dial an emergency number.
Phone Password
The Phone Lock feature uses the phone password to protect your
phone against unauthorized use. The phone password is supplied
with the phone and is preset to “00000000” at the factory.
To
activate/deactivate the Phone
Lock feature
“Phone lock” on page 134 (Menu
9.7.3).
“Change password” on page 134
(Menu 9.7.4).
PIN
The Personal Identification Number or PIN (4 to 8 digits) protects
your SIM card against unauthorized use. It is usually supplied with
the SIM card.
Access Codes
141
Access Codes
change the phone password
See
T609.book Page 142 Monday, April 17, 2006 10:30 PM
If you enter an incorrect PIN three times in succession, the code is
disabled and cannot be used until you re-enable it by entering the
PUK (see below).
To
See
activate/deactivate the PIN Check
feature
page 133 (Menu 9.7.1).
change the PIN
page 134 (Menu 9.7.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If not, or
you have lost it, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message displays, enter the same
code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to
access specific functions, such as setting the maximum cost of a
call. These functions are available if supported by your SIM card.
If you enter an incorrect PIN2 three times in succession, the code is
disabled and you cannot access the functions until you re-enable it
by entering the PUK2.
To change the PIN2, see page 136 (Menu 9.7.8).
Access Codes
142
T609.book Page 143 Monday, April 17, 2006 10:30 PM
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some SIM
cards, is required to change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft key.
3. When the Confirm PIN2 message displays, enter the same code
again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession, you will not
be able to access the functions requiring the PIN2. Contact your
service provider for a new card.
Access Codes
Access Codes
143
T609.book Page 144 Monday, April 17, 2006 10:30 PM
Solving Problems
If you are experiencing problems with your phone, perform the
following simple checks before contacting a service professional.
This may save you the time and expense of an unnecessary service
call.
When you switch your phone on, the following messages may
appear:
Insert SIM Card
♦Check that the SIM card is correctly installed.
Phone Locked Enter Password
♦The automatic locking function has been enabled. You must enter
the phone’s password before you can use the phone. The factory
preset code is "00000000".
Enter PIN
♦You are using your phone for the first time. You must enter the
Personal Identification Number (PIN) supplied with the SIM card.
♦The PIN Check feature is enabled. Every time the phone is switched
on, the PIN has to be entered. To disable this feature, use the PIN
Check menu (Menu 9.7.1).
Enter PUK
♦The PIN code was entered incorrectly three times in succession
and the phone is now blocked. Enter the PUK supplied by your
service provider. There is a PUK1 and a PUK2 code. Please make
sure you know which one is locked and apply the correct PUK
code.
“No service,” “Network failure” or “Not done”
displays
♦The network connection was lost. You may be in a weak signal area
(in a tunnel or surrounded by buildings). Move and try again.
Solving Problems
144
T609.book Page 145 Monday, April 17, 2006 10:30 PM
♦You are trying to access an option for which you have not taken
You have entered a number but it was not dialed
♦Have you pressed the
key?
♦Are you accessing the right cellular network?
♦Is Call Barring turned on? (see “Call barring” on page 129 for
more details)
Your correspondent cannot reach you
♦Is your phone switched on (the
key pressed for more than one
second)?
♦Are you accessing the right cellular network?
♦Is Call Barring turned on? (see “Call barring” on page 129 for more
details)
♦Has your phone been call forwarded to another number?
Your correspondent cannot hear you speaking
♦Have you switched off the microphone?
♦Are you holding the phone close enough to your mouth? The
microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
♦Your battery is insufficiently charged. Recharge the battery.
The audio quality of the call is poor
♦Check the signal strength indicator on the display (
). The
number of bars indicates the signal strength from strong (
) to
weak ( ).
♦Try moving the phone slightly or move closer to a window if you
are in a building.
Solving Problems
145
Solving Problems
out a subscription with your service provider. Contact the service
provider for further details.
T609.book Page 146 Monday, April 17, 2006 10:30 PM
No number is dialed when you recall an Contacts list
entry
♦Check that the number has been stored correctly, by using the
Contacts list Search feature.
♦Re-store the number, if necessary.
If the above guidelines do not help you to solve the problem,
take note of:
♦the model and serial numbers of your phone
♦your warranty details
♦a clear description of the problem
Then contact your local dealer or Samsung after-sales service.
Solving Problems
146
T609.book Page 147 Monday, April 17, 2006 10:30 PM
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
*. In the U.S.A. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
Health and Safety Information
147
Health and Safety
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on the
safety standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies.
The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless phones employs a unit of
measurement known as Specific Absorption Rate (SAR). The SAR
limit recommended by the FCC is 1.6W/kg.*
SAR tests are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level
of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the
lower the power output of the phone.
T609.book Page 148 Monday, April 17, 2006 10:30 PM
Before a new model phone is available for sale to the public, it must
be tested and certified by the FCC that it does not exceed the limit
established by the government adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC
ID printed in the label on the phone.
For Body Operation
For body worn operation, this model phone has been tested and
meets the FCC RF exposure guidelines when used with a Samsungsupplied or approved accessory designated for this product or when
used with an accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance from the body for this model phone is written
in the FCC certification information. Non-compliance with the above
conditions may violate FCC RF exposure guidelines.
For more Information concerning exposure to radio frequency
signals, see the following websites:
♦Federal Communications Commission (FCC)
• http://www.fcc.gov
♦Cellular Telecommunications Industry Association (CTIA):
• http://www.wow-com.com
♦U.S.Food and Drug Administration (FDA)
• http://www.fda.gov/cdrh/consumer
Health and Safety Information
148
T609.book Page 149 Monday, April 17, 2006 10:30 PM
♦World Health Organization (WHO)
• http://www.who.int/peh-emf/en
Precautions When Using Batteries
♦Never use any charger or battery that is damaged in any way.
♦Use the battery only for its intended purpose.
♦If you use the phone near the network’s base station, it uses less
Health and Safety Information
149
Health and Safety
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
♦Battery charging time depends on the remaining battery charge,
the type of battery and the charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new battery.
♦If left unused, a fully charged battery will discharge itself over
time.
♦Use only Samsung-approved batteries and recharge your battery
only with Samsung-approved chargers. When a charger is not in
use, disconnect it from the power source.
♦Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
♦Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
♦Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily
not work, even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 ° C (32 ° F).
♦Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and terminals of the battery (metal strips
on the battery), for example when you carry a spare battery in a
pocket or bag. Shortcircuiting the terminals may damage the
battery or the object causing the short-circuiting.
T609.book Page 150 Monday, April 17, 2006 10:30 PM
♦Dispose of used batteries in accordance with local regulations.
Always recycle. Do not dispose of batteries in a fire.
Operating Environment
Remember to follow any special regulations in force in any area and
always switch your phone off whenever it is forbidden to use it, or
when it may cause interference or danger.
When connecting the phone or any accessory to another device, read
its user’s guide for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment, users are advised
that for the satisfactory operation of the equipment and for the safety
of personnel, it is recommended that the equipment should only be
used in the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of
15 cm (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
♦should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
♦should not carry the phone in a breast pocket.
Health and Safety Information
150
T609.book Page 151 Monday, April 17, 2006 10:30 PM
♦should use the ear opposite the pacemaker to minimize potential
interference.
If you have any reason to suspect that interference is taking place,
switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids.
In the event of such interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
Other Medical Devices
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles. Check with the manufacturer or
its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
You should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
Health and Safety Information
151
Health and Safety
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately shielded
from external RF energy. Your physician may be able to assist you in
obtaining this information. Switch your phone off in health care
facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
T609.book Page 152 Monday, April 17, 2006 10:30 PM
could cause an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a refueling point
(service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include the areas below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be advised to
turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks as well as user-programmed
functions, which cannot guarantee connection in all conditions.
Therefore, you should never rely solely on any wireless phone for
essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched
on and in a service area with adequate signal strength. Emergency
calls may not be possible on all wireless phone networks or when
certain network services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
Health and Safety Information
152
T609.book Page 153 Monday, April 17, 2006 10:30 PM
If certain features are in use (call barring, for example), you may first
need to deactivate those features before you can make an emergency
call. Consult this document and your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your phone
may be the only means of communication at the scene of an
accident; do not cut off the call until given permission to do so.
Other Important Safety Information
♦Only qualified personnel should service the phone or install the
Care and Maintenance
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions help you fulfill any
warranty obligations and allow enjoy this product for many years:
♦Keep the phone and all its parts and accessories out of reach of
small children.
Health and Safety Information
153
Health and Safety
phone in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty applicable to the device.
♦Check regularly that all wireless phone equipment in your vehicle
is mounted and operating properly.
♦Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
♦For vehicles equipped with an air bag, remember air bag inflates
with great force. Do not place installed or portable wireless
equipment in the area over the air bag or in the air bag
deployment area. If wireless equipment is improperly installed, and
the air bag inflates, serious injury could result.
♦Switch your phone off before boarding an aircraft. The use of
wireless phones in aircraft is illegal unless permitted and may be
dangerous to the aircraft’s operation.
♦Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, legal action, or both.
T609.book Page 154 Monday, April 17, 2006 10:30 PM
♦Keep the phone dry. Precipitation and humidity contain minerals
that may corrode electronic circuits.
♦Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
♦Do not use or store the phone in dusty or dirty areas. Moving parts
may become damaged or clogged.
♦Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and warp
or melt certain plastics.
♦Do not store the phone in cold areas. When the phone warms up to
its normal operating temperature, moisture can form inside the
phone, which may damage the phone’s electronic circuit boards.
♦Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
♦Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
♦Do not paint the phone. Paint can clog the device’s moving parts
and prevent proper operation.
♦Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
♦Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage the
phone and violate regulations governing radio devices.
♦If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
FCC Notice
Cautions
Modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Health and Safety Information
154
T609.book Page 155 Monday, April 17, 2006 10:30 PM
FCC Compliance Information
This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
Information to User
Appendix A: CERTIFICATION INFORMATION
(SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Health and Safety Information
155
Health and Safety
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
♦Reorient or relocate the receiving antenna.
♦Increase the separation between the equipment and receiver.
♦Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
♦Consult the dealer or an experienced radio/ TV technician for help.
T609.book Page 156 Monday, April 17, 2006 10:30 PM
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC is 1.6 W/kg**. SAR Tests are conducted
using standard operating positions accepted by the FCC with the
phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use
only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
exposure limit established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the ear and worn on
the body) as required by the FCC. For body worn operation, this
**. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to account for any
variations in measurements.
Health and Safety Information
156
T609.book Page 157 Monday, April 17, 2006 10:30 PM
model phone has been tested and meets FCC RF exposure
guidelines when used with a Samsung accessory designated
for this product or when used with an accessory that contains
no metal and that positions the handset a minimum of 1.5 cm
from the body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
♦Head: 0.894 W/Kg.
♦Body-worn: 0.675 W/Kg.
SAR information on this and other model phones can be viewed online at www.fcc.gov/oet/fccid. To find information that pertains to a
particular model phone, this site uses the phone FCC ID number
which is usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find
the number. Once you have the FCC ID number for a particular
phone, follow the instructions on the website and it should provide
values for typical or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Appendix B: Safe and Responsible Wireless
Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in North America today take advantage of
the unique combination of convenience, safety and value delivered by
the wireless telephone. Quite simply, the wireless phone gives people
Health and Safety Information
157
Health and Safety
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines.
The maximum SAR values for this model phone as reported to the
FCC are:
T609.book Page 158 Monday, April 17, 2006 10:30 PM
the powerful ability to communicate by voice-almost anywhere,
anytime with the boss, with a client, with the kids, with emergency
personnel or even with the police. Each year, North Americans make
billions of calls from their wireless phones, and the numbers are
rapidly growing.
But an important responsibility accompanies those benefits, one that
every wireless phone user must uphold. When driving a car, driving
is your first responsibility. A wireless phone can be an invaluable
tool, but good judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving
requires alertness, caution and courtesy. It requires a heavy dose of
basic common sense-keep your head up, keep your eyes on the road,
check your mirrors frequently and watch out for other drivers. It
requires obeying all traffic signs and signals and staying within the
speed limit. It means using seat belts and requiring other passengers
to do the same.
But with wireless phone use, driving safely means a little more. This
brochure is a call to wireless phone users everywhere to make safety
their first priority when behind the wheel of a car. Wireless
telecommunications is keeping us in touch, simplifying our lives,
protecting us in emergencies and providing opportunities to help
others in need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a wireless
phone which should be easy to remember:
1. Get to know your wireless phone and its features such as speed
dial and redial. Carefully read your instruction manual and learn
to take advantage of valuable features most phones offer,
including automatic redial and memory. Also, work to memorize
Health and Safety Information
158
T609.book Page 159 Monday, April 17, 2006 10:30 PM
the phone keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands free device. A number of hands free
wireless phone accessories are readily available today. Whether
you choose an installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of these devices if
available to you.
4. Suspend conversations during hazardous driving conditions or
situations. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you
are reading an Contacts list or business card, or writing a to do
list while driving a car, you are not watching where you are going.
It’s common sense. Don’t get caught in a dangerous situation
because you are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan your
calls before you begin your trip or attempt to coincide your calls
with times you may be stopped at a stop sign, red light or
otherwise stationary. But if you need to dial while driving, follow
this simple tip-dial only a few numbers, check the road and your
mirrors, then continue.
Health and Safety Information
159
Health and Safety
3. Position your wireless phone within easy reach. Make sure you
place your wireless phone within easy reach and where you can
grab it without removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible, let your voice
mail answer it for you.
T609.book Page 160 Monday, April 17, 2006 10:30 PM
7. Do not engage in stressful or emotional conversations that may
be distracting. Stressful or emotional conversations and driving
do not mix-they are distracting and even dangerous when you are
behind the wheel of a car. Make people you are talking with aware
you are driving and if necessary, suspend conversations which
have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless phone is
one of the greatest tools you can own to protect yourself and your
family in dangerous situations-with your phone at your side, help
is only three numbers away. Dial 9-1-1 or other local emergency
number in the case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your
wireless phone provides you a perfect opportunity to be a Good
Samaritan in your community. If you see an auto accident, crime
in progress or other serious emergency where lives are in danger,
call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special wireless non emergency
assistance number when necessary. Certain situations you
encounter while driving may require attention, but are not urgent
enough to merit a call for emergency services. But you still can
use your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency wireless number.
Careless, distracted individuals and people driving irresponsibly
represent a hazard to everyone on the road. Since 1984, the Cellular
Telecommunications Industry Association and the wireless industry
have conducted an educational outreach program to inform wireless
Health and Safety Information
160
T609.book Page 161 Monday, April 17, 2006 10:30 PM
phone users of their responsibilities as safe drivers and good
citizens. As we approach a new century, more and more of us will
take advantage of the benefits of wireless telephones. And, as we
take to the roads, we all have a responsibility to drive safely.
The wireless industry reminds you to use your phone safely when
driving.
Cellular Telecommunications & Internet Association For more
information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID =85
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones
with built-in antennas, often called cell, mobile, or PCS phones.
These types of wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short distance between
the phone and the user s head. These RF exposures are limited by
Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety
agencies. When the phone is located at greater distances from the
user, the exposure to RF is drastically lower because a person’s RF
exposure decreases rapidly with increasing distance from the source.
The so-called “cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate at far lower
power levels, and thus produce RF exposures well within the FCC’s
compliance limits.
2. Do wireless phones pose a health hazard?
Health and Safety Information
161
Health and Safety
Appendix C: Consumer Update on Wireless
Phones
T609.book Page 162 Monday, April 17, 2006 10:30 PM
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit very low levels of
RF when in the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been
confirmed by additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in determining
the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation emitting
consumer products such as wireless phones before they can be sold,
as it does with new drugs or medical devices. However, the agency
has authority to take action if wireless phones are shown to emit
radio frequency energy (RF) at a level that is hazardous to the user. In
such a case, FDA could require the manufacturers of wireless phones
to notify users of the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a number
of steps, including the following:
♦Support needed research into possible biological effects of RF of
the type emitted by wireless phones;
♦Design wireless phones in a way that minimizes any RF exposure
to the user that is not necessary for device function; and
♦Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use on
human health
Health and Safety Information
162
T609.book Page 163 Monday, April 17, 2006 10:30 PM
4. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about
the effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception
in 1996. An influential result of this work has been the development
of a detailed agenda of research needs that has driven the
Health and Safety Information
163
Health and Safety
FDA belongs to an interagency working group of the federal agencies
that have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong
to this working group:
♦National Institute for Occupational Safety and Health
♦Environmental Protection Agency Federal Communications
Commission
♦Occupational Safety and Health Administration
♦National Telecommunications and Information Administration
♦The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are
sold in the United States must comply with FCC safety guidelines
that limit RF exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF exposures
that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions
discussed in this document.
T609.book Page 164 Monday, April 17, 2006 10:30 PM
establishment of new research programs around the world. The
Project has also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. FDA
provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the
latest research developments around the world.
5. What steps can I take to reduce my exposure to radio frequency
energy from my wireless phone?
If there is a risk from these products—and at this point we do not
know that there is—it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a few
simple steps to minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure a person
receives, reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the
source of the RF, since the exposure level drops off dramatically with
distance. For example, you could use a headset and carry the
wireless phone away from your body or use a wireless phone
connected to a remote antenna
Again, the scientific data do not demonstrate that wireless phones
are harmful. But if you are concerned about the RF exposure from
these products, you can use measures like those described above to
reduce your RF exposure from wireless phone use.
Health and Safety Information
164
T609.book Page 165 Monday, April 17, 2006 10:30 PM
6. What about children using wireless phones?
7. Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that hands-free kits
reduce risks. Hands-free kits can be used with wireless phones for
convenience and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the source of the
RF emissions, will not be placed against the head. On the other hand,
if the phone is mounted against the waist or other part of the body
during use, then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against the head or
against the body. Either configuration should result in compliance
with the safety limit.
Health and Safety Information
165
Health and Safety
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radio frequency energy (RF), the measures
described above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones at
all. For example, the government in the United Kingdom distributed
leaflets containing such a recommendation in December 2000. They
noted that no evidence exists that using a wireless phone causes
brain tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it was not
based on scientific evidence that any health hazard exists.
T609.book Page 166 Monday, April 17, 2006 10:30 PM
8. Do wireless phone accessories that claim to shield the head from
RF radiation work?
Since there are no known risks from exposure to RF emissions from
wireless phones, there is no reason to believe that accessories that
claim to shield the head from those emissions reduce risks. Some
products that claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that these
products generally do not work as advertised. Unlike “hand-free”
kits, these so-called “shields” may interfere with proper operation of
the phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In February
2002, the Federal trade Commission (FTC) charged two companies
that sold devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to substantiate their
claim.
9. What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, FDA helped develop a
detailed test method to measure electromagnetic interference (EMI)
of implanted cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard sponsored by
the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device
manufacturers, and many other groups, was completed in late 2000.
This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld wireless
phones and helped develop a voluntary standard sponsored by the
Institute of Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for hearing
Health and Safety Information
166
T609.book Page 167 Monday, April 17, 2006 10:30 PM
aids and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing aid at the
same time. This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference
be found to occur, FDA will conduct testing to assess the interference
and work to resolve the problem.
10. What are the results of the research done already?
Health and Safety Information
167
Health and Safety
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research methods.
Animal experiments investigating the effects of radio frequency
energy (RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have suggested that
low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed
increased tumor development used animals that had been
genetically engineered or treated with cancer causing chemicals so
as to be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don’ t know with certainty
what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any possible
association between the use of wireless phones and primary brain
cancer, gioma, meningioma, or acoustic neuroma, tumors of the
brain or salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health effects
from wireless phone RF exposures. However, none of the studies can
answer questions about long-term exposures, since the average
period of phone use in these studies was around three years.
T609.book Page 168 Monday, April 17, 2006 10:30 PM
11. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the
data that are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the time
of exposure to a cancer-causing agent and the time tumors develop if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
12. Which other federal agencies have responsibilities related to
potential RF health effects?
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/index.html
National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
Health and Safety Information
168
T609.book Page 169 Monday, April 17, 2006 10:30 PM
International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Health and Safety
Health and Safety Information
169
T609.book Page 170 Monday, April 17, 2006 10:30 PM
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG ELECTRONICS
CANADA INC. (SAMSUNG) warrants to the original purchaser
("Purchaser") that SAMSUNG’s Phones and accessories ("Products")
are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase
and continuing for the following specified period of time after that
date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does not
cover: (a) defects or damage resulting from accident, misuse, abuse,
neglect, unusual physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts
that are scratched or damaged due to normal use; (d) malfunctions
resulting from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from improper
testing, operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g) Product
used or purchased outside the United States or Canada.
STANDARD LIMITED WARRANTY
170
T609.book Page 171 Monday, April 17, 2006 10:30 PM
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by SAMSUNG
for charging the battery, (ii) any of the seals on the battery are broken
or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,
without charge to Purchaser, any defective component part of
Product. To obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by Purchaser’s sales
receipt or comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers’ name and
address. To obtain assistance on where to deliver the Product, call
Samsung Customer Care at 1-800-SAMSUNG. Upon receipt,
SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any
Product or replace Product with a rebuilt, reconditioned or new
Product. Repaired/replaced leather cases, pouches and holsters will
be warranted for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or
for 90 days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and labor
charges for the repair or return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
STANDARD LIMITED WARRANTY
171
T609.book Page 172 Monday, April 17, 2006 10:30 PM
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
♦THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
♦WARRANTIES OF TITLE OR NON-INFRINGEMENT;
♦DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
♦THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
♦COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
STANDARD LIMITED WARRANTY
172
T609.book Page 173 Monday, April 17, 2006 10:30 PM
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY
CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER
OF THIS LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE
LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH
THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF
ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
STANDARD LIMITED WARRANTY
173
T609.book Page 174 Monday, April 17, 2006 10:30 PM
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects
this allocation of risk and the limitations of liability contained in this
Limited Warranty. The agents, employees, distributors, and dealers
of SAMSUNG are not authorized to make modifications to this
Limited Warranty, or make additional warranties binding on
SAMSUNG. Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Electronics Canada, Inc.
©2006 Samsung Electronics Canada, Inc.. SAMSUNG is a registered
trademark of Samsung Electronics Co., Ltd. and its related entities.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice.
STANDARD LIMITED WARRANTY
174
T609.book Page 175 Monday, April 17, 2006 10:30 PM
Index
A
Alarm • 69
Alert type 125
Alphabet mode, text input • 31
Answering
call • 19
second call • 26
Anykey answer • 121
Auto redial • 121
B
Backlight
description • 8
Battery
charging 12
installing 10
low indicator • 13
Bluetooth 132
Searching for new devices 132
Security modes 132
Turning Bluetooth On and Off
132
Visibility 132
Broadcast messages 66
C
Calculator • 74
Calendar memos
viewing • 73
writing • 72
Call barring • 129
Call records
missed • 20, 49
Call time • 51
Caller ID • 131
Calls
answering • 19, 26
barring • 129
ending • 17
forwarding • 128
holding • 23
making • 16
redialing • 17
waiting • 26, 130
Camera
recording video 85
taking photos • 81
viewing photos • 86
Characters, entering • 29
Charging battery 12
Connection settings, Profile
Settings 136
Connection tone • 127
Converter 75
D
Dangerous areas • 151
Deleting
audio clips • 91
phone book • 109
photos • 87
videos • 87
Deleting Games 68
Display
backlight • 8
external • 9
icons • 7
layout • 7
DTMF tones, send • 25
E
Earpiece volume • 19
Entering Text 29
Using Alphabet Mode 31
Using T9 mode 30
Using the Symbol Mode 33
External display • 9
175
T609.book Page 176 Monday, April 17, 2006 10:30 PM
F
FDN (Fixed Dial Number) mode •
135
Folder tone • 126
Forwarding
calls • 128
G
Games
deleting 68
Games • 67
Get Ringtunes 77
H
Health and safety • 147
Holding, calls • 23
I
Icons, description • 7
IM
Settings 63
Instant Messaging 53
International calls • 17
K
Key volume • 19
Keypad tones
selecting • 125
sending • 25
L
Language, select • 120
Last number, redial • 17
Locking
phone • 134
Low battery indicator • 13
M
Memory Card 9, 104
176
Memory Status 105
Phone Book • 117
Menus
accessing • 40
list • 41
Message tone • 126
Messages 53
Messaging
types available 53
Micro SD memory card 104
Minute minder • 127
Missed calls • 20, 49
MP3 player 88
Mp3 Player
Creating your playlist 88
Using the MP3 player 89
Multimedia Message
Settings 64
Multiparty call • 27
Multi-party calls • 27
Muting
key tones • 25
microphone • 24
My music 102
My Name Card /b 114
N
Names
searching/dialing • 110
Network selection • 130
Network services • 127
Numbers, phone
searching and dialing • 110
storing • 106
O
On/off switch, phone • 14
Online Album 88
P
Password, phone • 134, 141
Phone
display • 7
T609.book Page 177 Monday, April 17, 2006 10:30 PM
icons • 7
layout • 3
locking • 134
password • 141
resetting • 139
switching on/off • 14
Phone Book
copying • 109
deleting • 109, 114
editing • 109
searching/dialing • 114
storing • 106
Phone Settings
resetting 139
Phonebook Management 115
Photos
deleting • 82
taking • 81
PIN
changing • 134
description • 141
PIN2
changing • 136
description • 142
Power on/off tone • 126
Privacy • 135
PUK • 142
PUK2 • 143
Push Message
Settings 65
R
Radio frequency • 147
Record Audio 90
Recording Video 85
Redialing
automatically • 121
manually • 17
Resetting phone • 139
Ring Volume 125
Ringtunes 98
Roaming • 130
Rogers MusicStore 77
S
Safety
information • 147
precautions • 1
Schedule • 71
SDN (Service Dialing Numbers) •
117
Searching, Phone Book • 110
Security
changing passwords 134
locking
media contents • 135
Phone Lock 134
PIN Check 133
SIM Lock 135
Security • 133
SIM card
installing • 10
SIM Lock 135
Sound settings • 124
Stopwatch 76
Switching on/off
microphone • 24
phone • 14
Symbol Mode 33
T
T9 mode, text input • 30
Text input mode • 29
Text Message
Settings 63
Text, entering • 29
Time format • 119
Timer 75
Tone
connect • 127
folder • 126, 127
keypad • 125
message • 126
minute minder • 127
power on/off • 126
Travel adapter 12
177
T609.book Page 178 Monday, April 17, 2006 10:30 PM
U
Understanding Your Phonebook
Management 115
uses 155
V
Video
recording 85
View Online Album 88
Voice mail 61
Voice recognition 92
Volume, adjust
earpiece • 19
Volume, adjusting • 19
Voume, adjusting
keypad tone 125
W
Waiting call • 26, 130
World time 76
178
➄ Press the Select soft key.
➃ Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
➂ Press the Select soft key.
➁ Scroll using the Up and
Down keys through the
list of the menus until you
reach the menu you want.
➀ Press the Menu soft key.
Each of the two soft keys (
and
)
perform the function indicated by the
text above it on the bottom line in the
display.
Access the
Menu
Functions
➀ Open the phone and
press the View soft
key.
➁ Scroll using the Up
and Down keys through
the missed calls.
➂ To return the call, press
the
key.
Open the phone
or
Press the
key.
Answer a Call
Briefly press the
key.
End a Call
View Missed
Calls
Immediately
After Missing
Them
➀ Enter the number.
➁ Press the
key.
Press and hold the
key.
Make a Call
Switch On/Off
Quick Reference Card
Quad-Band SGH-t609 EDGE Telephone
T609.book Page 179 Monday, April 17, 2006 10:30 PM
Take a
Photo
➀ Select the Incoming
Call menu option (Menu
9.4.1).
Choose
the Alert
Type
➀ Press and hold the Side
Camera key to start
Preview Mode.
➁ Press the
key or Side
Camera key to take a
picture.
• With the folder closed
➀ Press and hold the Side
Camera key to start
Preview Mode.
➁ Press the Side Camera
key to take a picture.
• With the folder open
➂ Press the Save soft key.
➁ Select an option:
• Melody
• Vibration
• Vibration then
Melody
Press the
or
key on
the left side of the phone.
Adjust the
Volume
Store
Numbers in
the
Contacts
list
Contacts list.
➁ Enter the first few letters
of the name.
➂ To scroll through the
names, press the Up or
Down key.
➃ Press the
key to
select the Contact.
➄ Press the
key to dial.
➀ Press Menu 8.1 for
➀ Enter the number and
press the Options soft
key and select Save to
contacts.
➁ Select either Phone or
SIM.
➂ If prompted, enter a Type
and press the Select soft
key.
➃ Enter the name.
➄ Press the Save soft key.
➅ Press the
key to
return to Idle Mode.
T609.book Page 180 Monday, April 17, 2006 10:30 PM