ViewSonic | G70mb | User guide | ViewSonic G70mb User guide

G70m /
G70mb
Color Monitor
User Guide
Guide de l’utilisateur
Bedienungsanleitung
(International Spanish)
(Italian)
(Brazilian Portuguese)
(Swedish)
(Russian)
(Polish)
(Japanese)
(Trad. Chinese)
With Plug and Play
Simp. Chinese)
Full 17" (16.0" Diagonal Viewable)
(Korean)
(Arabic)
Copyright © ViewSonic Corporation, 2000. All right reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).
E
N
G
L
I
S
H
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product
meets the E NERGY S TAR® guidelines for energy efficiency.
Disclaimer: ViewSonic ® Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use this product .
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at: www.viewsonic.com. The
ViewSonic Wizard CD-ROM also provides an opportunitiy for you to print the regisntration
form, which you may then mail or fax to ViewSonic.
For Your Records
Write the Serial Number (see back of ViewPanel) and the Purchase Date in the
spaces below. Keep this User Guide as a permanent record of your purchase to
help with identification in the event of theft or loss.
Product Name:
ViewSonic G70m/G70mb
Model Number:
VCDTS21581-2/3
Document Number:
Serial Number:
Purchase Date:
G70m/G70mb_UG_162 (Rev.1B)
__________________
__________________
ViewSonic G70m/G70mb
Getting Started
1
CONTENTS
For Your Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Getting Started
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
E
N
G
L
I
S
H
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using the Monitor
Setting the Timing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Other Information
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Appendix
Power Cord Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2
Getting Started
ViewSonic G70m/G70mb
Getting Started
Congratulations on your purchase of a Graphics Series ViewSonic G70m/
G70mb color monitor. Important! Save the original box and all packing
material for future shipping needs.
NOTE: This product was designed for operation in the magnetic fields of the
hemisphere where it was purchased. Also, the word "Windows®" in this user
guide refers to the following Microsoft® operating systems: Windows '95,
Windows '98, Windows 2000, Windows NT (4.0).
E
N
G
L
I
S
H
Package Contents
Your ViewSonic G70m/G70mb package includes:
• ViewSonic G70m/G70mb monitor
with attached video cable
• Power cord
• Audio cable
• Microphone cable
• Setup Guide
• ViewSonic Wizard CD-ROM
(incudes User Guide PDF file and
INF/ICM Display Optimization
files)
IMPORTANT: The supplied INF file assures compatibility with Windows
operating systems, and the ICM file (Image Color Matching) ensures accurate
on-screen colors. ViewSonic® recommends that you install both files.
Precautions
• For best viewing conditions sit at
least 18" from the monitor.
• AVOID TOUCHING THE
SCREEN WITH YOUR FINGERS.
Oils from the skin are difficult to
remove.
• NEVER REMOVE THE REAR
COVER. The monitor contains
high-voltage parts. You may suffer
serious injury if you touch these
parts.
• Avoid exposing the monitor to
direct sunlight or another heat
source. The monitor should be
facing away from direct sunlight
to reduce glare.
• Always handle your monitor with
care when moving it.
ViewSonic G70m/G70mb
• Choose a well ventilated area to
position your monitor. Do not place
anything on the monitor that prevents
adequate dissipation of heat.
• Ensure the area around the monitor is
clean and free of moisture.
• Keep the monitor away from
magnets, motors, transformers,
speakers, and televisions.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• If smoke, abnormal noise, or strange
odor is present, immediately switch
the monitor off and call your dealer
or ViewSonic. It is dangerous to
continue using the monitor.
Getting Started
3
Quick Installation
1
E
N
G
L
I
S
H
Connect video cable
Make sure both the monitor and
computer are powered OFF. Connect
the video cable to the computer.
Macintosh® users: Connect a
Macintosh adapter to the video cable,
then to the computer. To order a
Macintosh adapter contact ViewSonic
(see Customer Support).
2
Connect power cord
Connect the power cord from a
properly grounded AC outlet to the
monitor.
3
Power-ON monitor and computer
Power-ON the monitor, then powerON the computer. This sequence
(monitor before computer) is very
important.
NOTE: At this point Windows ® 98
users may receive a message asking
them to install the M70/M70B’s INF
file.
4
Install Display Optimization
files (INF and ICM files)
(1) Insert the ViewSonic Wizard CDROM into your computer’s CD-ROM
drive.
NOTE: If your computer does not
have a CD-ROM drive, see Customer
Support in this manual.
4
Install Display Optimization files
(continued)
(2) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not autostart: double-click on the CD-ROM icon
in Windows Explorer, then double-click
on install.exe.
(3) Follow the on-screen instructions.
5
6
Audio Installation (optional)
• Speakers: Connect audio cable
(limecolored cable) to the
AUDIO OUT port of your computer's
sound card, then to the monitor's
AUDIO IN port (see illustration below).
• Microphone: Connect audio cable (pink
colored cable) to the MIC IN port of
your computer's sound card, then to
the monitor's MIC OUT port (see
illustration below).
Use the OnView® controls to adjust
the screen image.
See Using the Monitor (page 5).
Installation is complete! Enjoy your
new G70m/G70mb Monitor!
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
“For Your Records” on page 1. (See
back of monitor.)
To register your product go online to
www.viewsonic.com.
Microphone IN
(side of monitor):
Connect external
microphone
Audio OUT
(side of monitor):
Connect headphones or external
speakers
Wall
socket
4
Getting Started
Microphone
OUT: Connect
to Mic IN port of
computer's
sound card
Video cable
Power cords
Audio IN:
Connect to
Audio OUT
port of
computer's
sound card
ViewSonic G70m/G70mb
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example 1024 x 768) and refresh rate (or vertical frequency--example 75
Hertz). After setting the timing mode, use the OnView® controls (pages 7-9) to
adjust the screen image.
E
N
G
L
I
S
H
The recommended timing mode for this monitor is: VESA® 1024 x 768 @ 75Hz
To set the Timing Mode:
1 Set the resolution: Right-click on the Windows® desktop > Properties >
Settings > Desktop Area > set the resolution.
2 Set the refresh rate: See your graphic card's user guide for instructions.
NOTE: To minimize the adjustments required for an optimal screen image,
select a timing mode from the Preset Timing Modes table below.
Preset Timing Modes
VGA 640 x 400 @ 70Hz
VESA 640 x 480 @ 75, 85Hz
VESA 800 x 600 @ 75Hz
VESA 800 x 600 @ 85Hz
VESA 1024 x 768 @ 60, 75, 85Hz
VESA 1280 x 1024 @ 60 Hz
Macintosh® 640 x 480 @ 67Hz
Macintosh 832 x 624 @ 74.6Hz
Macintosh 1024 x 768 @ 75Hz
WARNING: Do NOT set the graphics card in your computer to exceed the
maximum refresh rate for each resolution (see below). Doing so may result in
permanent damage to your monitor.
Maximum Refresh Rates
1280 x 1024 NI @ 66Hz
1024 x 768 NI @ 87 Hz
800 x 600 NI @ 110Hz
640 x 480 NI @ 120 Hz
(NI= Non Interlaced)
ViewSonic G70m/G70mb
Using the Monitor
5
Adjusting the Screen Image
To adjust the screen image, follow the instructions in steps ➊ through ➏
below. You will use the buttons of the Front Control Panel to adjust the
OnView® controls, which are displayed on the Main Menu (shown below). The
OnView controls are explained on pages 7-9.
Internal Microphone
E
N
G
L
I
S
H
Main Menu
Front Control Panel
Increases
Audio
Volume
➋
Button [1]
displays
Main Menu
Decreases
Audio
Volume
➌
[▼] and [▲] scrolls
up and down Main
Menu to highlight
control (or control
pair)
➍
Button [2]
displays
control screen
for highlighted
control
➊
➏
Muted- Mutes Button [1] exits
Audio Audio control screen or
Light
Main Menu and
saves adjustments
➎
Power
On/Off
[▼] and [▲]
Power light:
decreases or
increases value Green = On
Orange = Power
of the selected
Saving
control
Mode
* The monitor automatically degausses each time you turn it on, removing the buildup of magnetic
fields that can affect color purity and convergence. To prevent possible damage, if you turn the
monitor off, then immediately on again, wait 20 minutes before doing this again. Do not turn the
monitor on and off repeatedly. To manually degauss the monitor, see the instructions on page 8.
6
Using the Monitor
ViewSonic G70m/G70mb
OnView® Controls
E
N
G
L
I
S
H
CONTRAST adjusts foreground white level of screen
image. Press [▼] or [▲] to adjust.
BRIGHTNESS adjusts background black level of screen
image. Press [▼] or [▲] to adjust.
ZOOM expands and contracts the entire screen image. Press
[▼] to contract the image, and [▲] to expand the image.
H. POSITION (Horizontal Position) moves screen image
left or right. [t] moves screen image left, [s] moves screen
image right.
H. SIZE (Horizontal Size) adjusts width of screen image.
[▼] decreases width, [▲] increases width.
V. POSITION (Vertical Position) moves screen image up
and down. [▼] moves screen down, [▲] moves screen up.
V. SIZE (Vertical Size) adjusts height of screen image.
[▼] decreases height, [▲] increases height.
PINCUSHION straightens vertical sides of screen image.
[▼] curves vertical edges inward, [▲] curves vertical edges
outward.
PIN BALANCE curves the screen's vertical edges to the left
or right. [▼] curves vertical edges to left, [▲] curves
vertical edges to right.
ViewSonic G70m/G70mb
Using the Monitor
7
To exit the Main Menu & save changes, press button [1].
TRAPEZOID makes vertical edges of screen image parallel.
[▼]narrows top and widens bottom, [▲] widens top and narrows
bottom.
PARALLELOGRAM slants vertical edges of screen image to left
or right. [▼] slants vertical edges to left, [▲] slants vertical edges to
right.
TILT rotates entire screen image. [▼] rotates screen image counterclockwise. [▲] rotates screen image clockwise.
E
N
G
L
I
S
H
DEGAUSS There are two ways to degauss the monitor;
automatically by turning the monitor on, or manually by selecting
the Degauss control from the OnView Main Menu.
Important: Do not degauss repeatedly. Doing so can be harmful
to the monitor. Wait at least 20 minutes (before selecting this
control again.
VIEWMATCH® COLOR provides four color adjustment options:
three preset color temperatures and USER COLOR which allows
you to adjust red and blue (green is fixed).
Press [▼] or [▲] to select one of the three color temperatures
shown below, then press [2] to activate it. Selecting and activating
USER COLOR displays the screen shown below.
NOTE: The factory setting for the monitor is 9300K, the color
temperature most frequently used in rooms with fluorescent lights.
From this
screen,
press button
[2] to select
Red or Blue,
then press
[▼] or [▲] to
adjust.
USER COLOR
8
Using the Monitor
ViewSonic G70m/G70mb
To exit the OnView® menu & save changes, press button [1].
V. MOIRE reduces horizontal interference patterns that appear as
ripples, waves, or unwanted background color textures. Interference
patterns of this type are most noticeable when viewing images
having closely spaced lines or finely detailed patterns.
Press [▼] or [▲] to minimize interference patterns.
H. MOIRE reduces vertical interference patterns that appear as
ripples, waves, or unwanted background color textures. Interference
patterns of this type are most noticeable when viewing images
having closely spaced lines or finely detailed patterns.
Press [▼] or [▲] to minimize interference patterns.
E
N
G
L
I
S
H
LANGUAGE allows you to choose from among five languages for
the OnView menus and adjustment screens; English,
French, German, Italian, and Spanish. To select a language,
press button [2]. To exit this screen, press button [1].
OSD POSITION allows you to move any OnView screen (menu or
adjustment screen) up, down, left, or right. Press button [2] to
select Vertical OSD or Horizontal OSD.
MEMOR
Y RECALL returns adjustments back to factory settings
MEMORY
only if the monitor is operating in a factory preset mode (page 11).
Exception: This control does not affect changes made with the
User color control, which allows you to adjust red, green, and
blue individually.
VIEWMETER® displays the frequency signal input (horizontal
scan and refresh rate) coming from the graphics card in your
computer.
NOTE: See your graphics card's user guide for more details.
ViewSonic G70m/G70mb
Using the Monitor
9
Other Information
Specifications
CRT
Type
Glass Surface
E
N
G
L
I
S
H
Input Signal
Compatibility
Video
17" (16.0" viewable diagonal), 100° deflection
0.23mm (H), 0.13mm (V), 0.27mm (D) dot pitch
High Contrast, Anti-Glare, Ant-static coating;
Standard light transmission rate = 46%
Sync
RGB Analog (0.7 Vp-p, 75 ohms)
HV Separated (TTL) ,
f H: 30-70kHz, f V: 50-120Hz
PC
Macintosh®*1
Up to 1280 x 1024
Power Macintosh ®, up to 1024 x 768
Maximum Refresh
Rates*2
1280 x 1024 @ 66 Hz
1024 x 768 @ 87 Hz
800 x 600 @ 110Hz
640 x 480 @ 120 Hz
Power
Voltage
AC 100-240V
Audio
Front Speakers
3 Watts (x2)
Connectors
Input Signal
Power
15 pin mini D-sub
3-pin plub (IEC320)
Display Area
Default
Full Scan
310mm (H) x230mm (V) (Typical)
320mm (H) x 240mm (V) (Depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
32°F to 140°F (0°C to 40°C)
5% to 95% (no condensation)
To 10,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
-40°F to +140°F (-40°C to +60°C)
5% to 95% (no condensation)
To 40,000 feet
Dimensions
Physical
(monitor)
405mm (W) x 421mm (H) x 418.5mm (D)
15.9" (W) x 16.6" (H) x 16.5" (D)
Weight
Net
12.0 kgs (26.4 lbs) (monitor only)
Regulations
50/60 Hz
UL, cUL, DHHS, DOC-B, TUV/GS, ISO9241-3,
DOC-B, NOM, TUV/GS, VCCI, BSMI, S-Mark,
C-tick, Energy Star®, E2000, PCT, CCIB/CCEE,
MPRII, TCO 99 (G70m) / TCO 95 (G70mb), Nemko,
Semko, Demko, FImko, B Mark, CE (for European
models only), EN 60950:1992, VCCI, CB
On
DPMSTM Stand By
DPMS Suspend
DPMS Off
Power saving
modes
<100W typical (green LED)
<15W (orange LED)
<15W (orange LED)
<3W (orange LED)
Preset Timing Modes (the monitor has been pre-adjusted to VESA® 800x600 @ 75Hz)
VGA 640 x 400 @ 70 Hz
VESA 640 x 480 @ 75 Hz, 85 Hz
VESA 800 x 600 @ 75 Hz, 85 Hz
VESA 1024 x 768 @ 60,75, 85 Hz
VESA 1280 x 1024 @ 60 Hz
Macintosh® 640 x 480 @ 67 Hz
Macintosh® 832 x 624 @ 74.6 Hz
Macintosh® 1024 x 768 @ 75 Hz
* 1 A Macintosh computer requires a ViewSonic® Macintosh adapter. To order adapter, contact customer
support. See the back cover of manual. You will need to provide the serial number on your monitor.
* 2 Warning: Do not set the graphics card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to the monitor.
10
E3-G70m.p65
Other Information
ViewSonic G70m/G70mb
10
1/25/01, 7:08 PM
Troubleshooting
No power
•
•
•
Make sure power button (or switch) is ON.
Make sure A/C power cord is securely connected to the back of the monitor and to a
power outlet.
Plug another electrical device (like a radio) into the power outlet to verify that the
outlet is supplying proper voltage.
Power on but no screen image
•
•
•
E
N
G
L
I
S
H
Make sure the video cable supplied with the monitor is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not
attached permanently to the monitor, tightly secure it to the monitor.
Adjust brightness and contrast.
Check this user's guide to see if an adapter is required for proper signal continuity
between graphics card and monitor.
Flickering
•
•
•
•
Not enough power supplied. Connect the monitor to a different outlet. If using a surge
protector, reduce the number of devices plugged in.
Check the ViewMeter® from the main menu (page 9) to verify the refresh rate (vertical
frequency) is 75 Hz or higher. See Specifications.
Make sure the graphics card in your computer can use non-interlaced mode at the
desired frequencies. To enable your graphics card to support higher refresh rates, try
selecting fewer colors or running lower resolutions.
Remove any devices from the area around the monitor that emits magnetic fields such
as radios, surge protectors, unshielded speakers, fluorescent lights, AC power
converters, desk fans, etc.
Wrong or abnormal colors
•
•
•
•
If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an
improper connection.
Connect the monitor to another computer.
Select Degauss from the Main Menu. Do this only once.
If you have an older graphics card, contact ViewSonic® Customer Support for a nonDDC adapter.
Entire screen image (rolls) vertically
•
•
•
Make sure video input signals are within the monitor's specified frequency range.
Try the monitor with another power source, graphics card, or computer system.
Connect the video cable securely.
Control buttons do not work
•
Press only one button at a time.
ViewSonic G70m/G70mb
E3-G70m.p65
Other Information
11
1/25/01, 4:10 PM
11
Customer Support (English)
For the most expedient answer to your question, do the following:
1 Check Troubleshooting (on the previous page).
2 For assistance contact your reseller.
3 For further assistance see the contact infomation listed below.
If contact information for your country or region is not listed below, ask
your reseller to refer you to a service center.
E
N
G
L
I
S
H
NOTE: You will need to provide the serial number (on the back of the product).
12
E3-G70m.p65
Country/Region
T = Telephone; F = Fax
Email
United States
T: (800) 688-6688
F: (909) 468-1202
vscs@viewsonic.com
Canada
T: (800) 688-6688
F: (909) 468-1202
vscs@viewsonic.com
United Kingdom
T: 0800 833 648
F: 0044 (0)1293 643910
--------------------------
Europe, Middle East,
Baltic countries, and
North Africa
T: 0044 (0)1293 643900
F: 0044 (0)1293 643910
--------------------------
Australia
(contact reseller)
------------------------
New Zealand
T: 64- 3 - 366-1135
F: 64-3-366-7006
mbarlass@vistech.co.nz
Singapore/Southeast
Asia
T: 65-273-4018
F: 65-273-1566
viewsonicspore@
pacifc.net.sg
Other Asia/Pacific
countries and Indian
Peninsula
T: 886-2-2248-4072
F: 886-2-2240-8238
South Africa
T: 27-11-314-0002
F: 27-11-314-0002
Other Information
vsi@viewsonic.com.tw
atscom@mweb.co.za
ViewSonic G70m/G70mb
12
1/25/01, 4:10 PM
Cleaning the Monitor
• MAKE SURE THE MONITOR IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN
OR CASE.
To clean the screen
1
2
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles.
If still not clean, apply a small amount of non-ammonia, non-alcohol
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the
screen.
E
N
G
L
I
S
H
To clean the case
1
2
Use a soft, dry cloth.
If still not clean, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.
DISCLAIMER
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the
monitor screen or case. Some chemical cleaners have been reported to damage the screen and/
or case of the monitor. ViewSonic will not be liable for damage resulting from use of any
ammonia or alcohol-based cleaners.
ViewSonic G70m/G70mb
E3-G70m.p65
Other Information
13
1/25/01, 4:10 PM
13
LIMITED WARRANTY
VIEWSONIC MONITORS
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic color monitors, including the display tubes, are warranted for three (3) years for all parts
and three (3) years for all labor from the date of the first consumer purchase.
E
N
G
L
I
S
H
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support.
You will need to provide your product's serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b)
your name, (c) your address, (d) a description of the problem, and (e) the serial number of the
product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION
CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED
UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS,
LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS
RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,
contact ViewSonic or your local ViewSonic dealer.
ViewSonic Monitor Warranty (V2.0)
14
E3-G70m.p65
Other Information
Release Date: 10-15-1999
ViewSonic G70m/G70mb
14
1/25/01, 4:10 PM
Appendix
Power Cord Safety Guidelines
CAUTION: Use a power cable that is properly grounded. Always use the AC cords listed for each
country.
Switzerland ................SEV
USA ...........................UL
Britain .........................BASEC/BS
Canada ......................CSA
Japan .........................Electric Appliance
Germany ....................VDE
Control Act
In other areas, use AC cord which meets local safety standards.
E
N
G
L
I
S
H
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow:
Earth
Blue:
Neutral
Brown:
Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary
to replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet CEE-22 requirements and will look like (Figure 1 below):
Figure 1
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure 2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected
according to the current rating for your unit. Please consult Table A below for the selection criteria for
power cords used in the United States and Canada.
Figure 2
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord
set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of
one of the inner conductors.
If you have any questions concerning which proper power cord to use, please consult with the dealer
from whom you have purchased your ViewPanel.
Table A
CordType
Size of Conductors In Cord
Maximum Current Rating of Unit
SJT
18AWG
16AWG
14AWG
10Amps
12Amps
12Amps
SVT
18AWG
17AWG
10Amps
12Amps
ViewSonic G70m/G70mb
E4-G70m.p65
Appendix
15
1/25/01, 4:13 PM
15
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
E
N
G
L
I
S
H
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Warning:
To assure continued FCC compliance, the user must use grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be
used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to
operate this device.
Power Supply Cord (USA)
For units with 100 - 120V input voltage in the USA, use the following :
UL Listed and CSA Certified Type SVT or SJT No. 18/3 AWG rated 125Vac 7 A min.
One end terminated in a molded on parallel blade, grounding attachment cap or hooded attachment cap
(15A, 125V configuration), other end terminated in a mold-on appliance coupler.
Notice for Germany
The x-rays generated in this unit are shielded sufficiently. High voltage: Max. 30 kV. Also, for ergonomic reasons, we
recommend that you do not display blue characters on a dark background. Doing so may produce insufficient contrast that
could lead to eye strain.
Notice for Japan
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
CE Conformity (For European models only)
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art. 13 with regard to “Safety”.
16
E4-G70m.p65
Appendix
ViewSonic G70m/G70mb
16
1/25/01, 7:14 PM
ViewSonic® Corporation
381 Brea Canyon Road
Walnut, CA 91789
Tel (909) 869-7976
Tel (800) 688-6688
Fax (909) 468-1202
Download PDF

advertising