FLIR Extech 401014 User Manual
PDF
Download
Document
Advertisement
Advertisement
Big Digit Indoor/Outdoor Thermometer MODEL 401014 Operation 1) Open the battery compartment by pushing the cover on the rear of the instrument downward as indicated by the arrow. Remove the battery safety strip and the protective cover on the LCD display. The instrument is now ready for use. 2) The temperature units can be selected via the switch located on the rear of the instrument. 3) The upper display indicates the indoor temperature in degrees C or F. The lower display indicates the outdoor temperature in degrees C or F. 4) Displaying the minimum and maximum values. a. Press the MAX/MIN button. The highest value measured since the Reset button was last pressed appears on the display. b. Press the MAX/MIN button again to display the lowest value measured since the Reset button was last pressed. c. Press the MAX/MIN button again to return to normal display operation. 5) Resetting (clearing) the MAX/MIN memory. a) Press and hold the RESET button for 1 second while in the MAX/MIN display mode to clear the memory and start recording new max/min values. 6) The low battery flag will appear on the display when the battery voltage is low. Replace the battery when this occurs. To replace the battery open the battery compartment by sliding the battery cover on the rear of the instrument downward as indicated by the arrow. Replace the 1.5V ‘AA’ battery and replace the cover. Never dispose of used batteries or rechargeable batteries in household waste. As consumers, users are legally required to take used batteries to appropriate collection sites, the retail store where the batteries were purchased, or wherever batteries are sold. Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment Specifications Range Indoor: 14.0 to 140.0oF (-10.0 to 60.0oC) Outdoor: -58.0 to 158.0oF (-50.0 to 70.0oC) Accuracy ±1.8oF/1oC from 32 to 122oF (0 to 50oC) ±3.6oF/ 2oC from -58 to 32oF(-50 to 0oC) and 122 to 158oF (50 to 70oC) Battery Cable Dimensions One (1) 'AAA' 1.5 V battery Outdoor temperature sensor cable length: Approx. 9' (3m) 3.9x4.25x0.75" (99x108x19mm) Two-year Warranty Teledyne FLIR warrants this Extech brand instrument to be free of defects in parts and workmanship for two years from date of shipment (a six-month limited warranty applies to sensors and cables). To view the full warranty text please visit: https://www.flir.com/support-center/warranty/instruments/extech-product-warranty/. Contact Customer Support Customer Support - Local Telephone List: https://support.flir.com/contact Obtain a Return Material Authorization (RMA): https://customer.flir.com/Home Contact Customer Service: https://support.flir.com/ContactService Technical Support Center: https://support.flir.com Copyright © 2023 Teledyne FLIR Commercial Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form www.extech.com 401014-en-US_V1.4 8/23 ">

Public link updated
The public link to your chat has been updated.
Advertisement