AEG LAVAMAT W 1030 Operating instructions

LAVAMAT W 1030
Washing machine
Instruction book
Dear customer,
Please read these user instructions carefully.
Above all, observe the "Safety" section in the first pages. Keep these
user instructions in a safe place for future reference. Please pass them
along to future owners of the appliance.
Important information concerning your safety and proper functioning
of the appliance is highlighted with the warning triangle or the signal
words (Warning!, Caution!, Attention!). Please observe carefully.
0 1. This symbol guides you step by step when operating the appliance.
2. ...
1
3
Next to this symbol you receive additional information and practical
tips on using the appliance.
2
Tips and information about the economical and environmentally
friendly use of the machine are marked with the clover.
These user instructions include tips for the correction of possible malfunctions by the user. See the section "What to do when...".
Our customer service department is at your disposal should technical
problems occur. See also the "Service" section.
Printed on paper manufactured with environmentally sound processes.
He who thinks ecologically acts accordingly ...
2
Contents
CONTENTS
Operating instructions
....................................
6
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Environmental protection tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drawer for Detergent and Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Temperature Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ON/OFF Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
9
9
10
10
12
12
Consumption Data and Time Required . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Before Washing for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Prepare washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sort washing and prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Types and Care Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detergent and conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Which detergent and conditioner? . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How much detergent and conditioner? . . . . . . . . . . . . . . . . . . . . . . . . .
Using Water Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
14
15
15
15
15
Performing a Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading the Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Detergent/Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Spin Speed or Selecting Rinse Hold . . . . . . . . . . . . . . . . . . . .
During the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing Cycle Complete/Removing the Washing . . . . . . . . . . . . . . . . . . . .
16
16
17
17
18
18
19
19
20
3
Contents
Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing with a Pre Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Separate Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Separate Gentle Rinsing/Starching/Conditioning . . . . . . . . . . . . . . . . . . .
Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
21
22
22
22
22
Cleaning and Caring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Detergent drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fill-in door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
23
23
24
24
What to do when… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . .
Perform emergency drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clean the circulating pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
25
27
28
29
Installation and Connection Instructions . . . . . . . . . . . . . . . .
30
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Dimensions of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Front and Side Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove transportation protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Levelling on uneven floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
32
32
32
33
34
34
34
Contents
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hot and Cold Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water drain-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery heights above 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
35
36
37
38
38
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Guarantee Conditions/Service Departments
Index
. . . . . . . . . . . . 39
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5
OPERATING INSTRUCTIONS
1
Safety
The safety standards of AEG electric appliances are in keeping with the
recognised rules of technology and the law governing the safety of
appliances. Nevertheless as a manufacturer we are committed to familiarise you with the following safety instructions:
Prior to initial start-up
• Observe the "Installation and Connection Instructions" below in
these user instructions.
• If the appliance is delivered during the winter and temperatures are
below freezing, allow the appliance to stand at room temperature for
24 hours before operation
Intended use
• The washing machine is intended exclusively for the washing of normal household washing in the home. If the appliance is used for purposes other than those intended, or if it is improperly operated, the
manufacturer can assume no liability for damages which may occur.
• Additions or modifications to the washing machine are strictly forbidden due to safety reasons.
• Use only those detergents which are suitable for the washing
machine. Observe instructions provided by the detergent manufacturer.
• Laundry to be washed may not contain any flammable solvents. This
must also be taken into consideration when washing pre-washed
laundry.
• Do not use the washing machine for dry-cleaning.
• Dyes and bleaches may only be used in the washing machine if such
use has been expressly endorsed by the manufacturer of these products. We can assume no liability for damages which may occur.
• Use tap water only. Rain water and industrial water may only be used
if they fulfil requirements in accordance with DIN1986 and DIN1988.
• Damage due to frost is not covered by the guarantee! If the washing
machine is located in a room in which below freezing temperatures
might occur, emergency draining must be carried out if danger of
freezing occurs (see "Emergency Draining"). Furthermore, the inlet
hose must be disconnected from the tap and laid on the floor.
6
Operating instructions
Safety of children
• Packaging materials (e.g. sheet and Styrofoam) can be dangerous for
children. Danger of asphyxiation! Keep packaging materials at a safe
distance from children.
• Children are often unable to recognise the dangers involved with
electrical appliances. Provide for proper supervision during operation,
and do not allow children to play with the washing machine – the
danger exists that a child might lock itself into the appliance.
• Make certain that children or small animals do not climb into the
drum of the washing machine.
• If the washing machine needs to be disposed of, remove the mains
plug, destroy the door lock, cut off the electrical cable and dispose of
the plug and remaining cable separately. In this way children are prevented from locking themselves in and are not exposed life threatening danger.
General Safety
• Repairs to the washing machine may only be carried out by trained
personnel. Improper repairs can give rise to significant hazards. If
repairs are required, contact customer service or your dealer.
• Never use the washing machine if the mains cable is damaged or the
control panel, the work surface, or the plinth are damaged to such an
extent that components inside the machine are openly accessible.
• Switch off the washing machine before cleaning, maintenance and
servicing. In addition, unplug from the mains or – in the case of permanent connection – pull the circuit breaker, or completely remove
screw type fuses.
• Never remove the mains plug by pulling on the cable. Always grip the
plug.
• Multi-way plugs / connectors and extension cables must not be used.
This could constitute a safety hazard!
• Do not clean the washing machine with a jet of water. There is a risk
of electric shock!
• When high temperature washing programs are selected, the glass in
the door becomes hot. Do not touch!
• Leave the water in the machine to cool down before performing an
emergency drain or cleaning the circulation pump.
• Small animals may gnaw at electrical power cables and water hoses.
There is a risk of electric shock and damage from water leaks! Keep
small animals away from the washing machine.
7
Operating instructions
2
Disposal
Dispose of the packaging!
Dispose of washing machine packaging materials properly. All packaging materials are environmentally sound and can be safely disposed of,
or burned in a refuse incineration plant.
The plastic parts can be reused:
• The external plastic cover and the bags inside are made of polyethylene (marking >PE<).
• The padding is made of CFC free expanded polystyrene
(marking >PS<).
Corrugated components are made from recycled paper and should be
disposed of at a paper recycling station.
Dispose of your old appliance!
If, at some point in time, the service life of the appliance has expired,
please take it to your nearest recycling centre, or to your appliance
dealer, who will accept the old appliance for a minimal fee.
2
Environmental protection tips
• No pre-wash is required for normally soiled washing. This saves you
detergent, water and time (and is good for the environment!).
• If the indicated load capacities are taken full advantage of, the washing machine is especially efficient.
• For small loads, use only one half to one third of the recommended
detergent quantity.
• Stains and soiling confined to given areas can be removed by means
of appropriate pre-treatment. You can then wash at lower temperatures.
• Wash lightly to medium soiled cottons with the energy saving program.
• Softeners are often not required. Try it! If you use a dryer, your washing will be soft and fluffy, even without softeners.
• A water softener should be used for water within a hardness range of
mid to high (as of hardness level II, see "Detergents and Conditioners"). Detergent can then always be dosed for water hardness level I
(= soft).
8
Operating instructions
Description of the Appliance
Front View
Control Panel
Drawer for
detergent and
softener
Rating plate
(behind door)
Door with
handle
Flap in front of the
circulation pump
Threaded feet
(height adjustable)
Drawer for Detergent and Conditioner
k
Pre wash detergent
or in-wash stain
treatment
l
Main wash detergent
(powder) and water
softener if required
w
Liquid conditioner
(softener, finisher,
starch)
Suction cap
(must be firmly
fitted)
9
Operating instructions
Control panel
Spin Speed
Button
Program Selector
Temperature Selector
EASY-CARES
Button
RINSE HOLD
Button
ON/OFF
Button
Program Selector
You define the type of washing
cycle using the program selector.
Important! Only turn the program
selector clockwise!
The various positions have the following effect:
COTTONS/LINEN, EASY-CARES (+button) Program Group
For cottons/linen: You only need to set the program selector to the
desired programme.
For easy-care washing: Set the program selector to the desired programm and then also press the EASY-CARES button.
• STAIN
Stain program for treating heavily soiled or stained washing with inwash stain treatment.
• MAIN WASH
Main washing cycle for normally soiled washing.
• QUICK WASH
Shortened main washing cycle for lightly soiled washing.
10
Operating instructions
• RINSE
Separate rinse, e.g. for rinsing hand washed fabrics (spinning in accordance with the selected washing type or rinse hold).
3
Rinse hold means: the washing is left in the last rinse water, it is not
spun.
• CONDITIONER
Separate conditioning of wet cotton/linen or easy-care washing. This
setting can also be used for separate starching and separate treatment
of wet cotton/linen or easy-care washing. (1 rinse, liquid conditioner is
washed in from the w compartment, spinning as per the programmes
for cotton/linen or easy-care washing, or rinse hold.)
• SPIN
Spinning after a rinse hold or separate spinning of hand washed cotton/linen or easy-care washing.
DELICATES Program Group
• DELICATES
Main washing cycle for delicates.
• SHORT SPIN
Spin after a rinse hold, or separate short spin of hand washed delicates.
WOOLLENS Program Group
• WOOL
Main washing cycle for woollens and particularly delicate fabrics.
• GENTLE RINSE
Separate short rinse, e.g. for rinsing hand washed fabrics or separate
gentle rinsing of delicates or woollens. (1 rinse, liquid conditioner is
washed in from the w compartment, short spin or rinse hold.)
• SHORT SPIN
Spin after a rinse hold, or separate short spin of hand washed woollens
or particularly delicate fabrics.
PUMP OUT
Pumps out the water after a rinse hold (without spinning).
PRE WASH
Pre wash (approx. 15 minutes, temperature limited to max. 40 °C) prior
to the main washing cycle that follows automatically. PRE WASH can
only be combined with COTTONS/LINEN and EASY-CARES.
11
Operating instructions
Temperature Selector
On the temperature selector you can set
the temperature for the washing cycle;
the temperature is continuously variable
from COLD to 95 °C.
2
E Position (Energy Saving): Energy saving
program at approx. 67 °C for lightly to
normally soiled cotton washing.
ON/OFF Button
This button is used to switch on the washing
machine and start the selected program, or
to switch off the washing machine.
Consumption Data and Time Required
The values given in the following table for selected programs were
determined under standard conditions. They provide a useful guide for
operation in the home.
Program
Selector
Button
Temperature
Selector
Cold Water
Connection
Type of Load
Washing in kg
Water
in
Litres Energy Time Energy Time
in
in
in
in
kWh Min. kWh Min.
95
Cottons
5
59
1.80
119
1.00
119
602)
Cottons/
Linen
5
59
1.10
119
0.65
119
40
Cottons/
Linen
5
59
0.60
119
0.60
119
40
EasyCares
2.5
48
0.40
86
0.40
86
DELICATES
30
Delicates
2.5
57
0.45
67
0.45
67
WOOL
30
Woollens
2
52
0.35
67
0.35
67
MAINWASH
EASYCARES
1) Figures valid for an inlet water temperature of approx. 60 °C
2) Note: program setting for testing in accordance with EN 60 456
12
Hot and
Cold Water
Connection1)
Operating instructions
Before Washing for the First Time
0 1. Pull the detergent drawer out from the control panel a little.
2. Pour around 1 litre of water into the washing machine via the detergent drawer. This will ensure when the washing machine is started that
the water container is closed and that the ECO valve can function correctly.
3. Perform a washing cycle without any washing (MAIN WASH 95, with
half the normal dose of detergent).
This serves to remove residues resulting from production of the appliance from the drum and the water container.
Prepare washing cycle
Sort washing and prepare
• Sort washing according to care symbol and type (see "Washing types
and care symbols").
• Empty all pockets.
• Remove metal objects (paper clips, safety pins etc.).
• In order to prevent bunching up of washing and damage to washing,
close zippers, button up duvets and pillow cases, and tie up loose
ends from, for example, aprons.
• Turn articles with double layered textiles inside out (sleeping bags,
anoraks etc.).
• Coloured, knitted fabrics, as well as wool and textiles with appliqués
should be turned inside out.
• Place small and delicate articles (baby booties, stockings, bras etc.)
into a washing net, a pillow case with zipper, or in large socks before
washing.
• Treat net curtains particularly carefully. Remove metal curtain rail
rollers or burred plastic rollers, or wrap these in a net or bag.
We cannot accept any liability for damage.
• Do not wash coloured and white washing together. White washing
will otherwise turn grey.
• New, coloured washing often contains excessive dye. Wash these
items separately the first time.
13
Operating instructions
• Mix small and large articles of washing! This improves washing efficiency, and the washing is more favourably distributed during the
spin cycle.
• Fluff washing before placing into the washing machine.
• Do not place folded washing into the drum.
• Observe tips for proper care such as "wash separately" and "wash separately several times"!.
Washing Types and Care Symbols
Care symbols assist in the selection of the correct washing program.
Washing should be sorted according to type and care symbol. The temperatures indicated in the care symbols are maximum temperatures.
Cottons ç
Cotton and linen fabrics with this care symbol are resistant to the
mechanical action of the washing machine and high temperatures.
The COTTONS/LINEN program is suitable for this type of washing.
Linen è ë
Cotton and linen fabrics with this care symbol are resistant to the
mechanical action of the washing machine. The COTTONS/LINEN program is suitable for this type of washing.
Easy-care washing ê í î
Fabrics such as treated cottons, cotton mixtures and synthetics with
this care symbol need careful handling. The EASY-CARES program is
suitable for this type of washing.
Delicates ì
Fabrics such as those with layered fibres, micro-fibres, as well as synthetics and net curtains with this care symbol need particularly careful handling. The DELICATES program is suitable for this type of washing.
Woollens and particularly delicate washing 9 ì
Fabrics such as woollens, wool mixtures and silk with this care symbol
are particularly delicate in respect of the mechanical action of the
washing machine. The WOOLLENS program is suitable for this type of
fabrics.
Important! Fabrics with the ï (hand washing) or ñ (do not wash!)
care symbols must not be washed in the washing machine!
14
Operating instructions
Detergent and conditioner
Which detergent and conditioner?
Use only detergents and conditioners which are suitable for use in
washing machines. Always observe the manufacturer’s instructions.
How much detergent and conditioner?
The required quantity depends upon:
• the amount of washing
2
If the detergent manufacturer does not include dosing instructions for
reduced loads, use one third less for half loads and only half of the full
load detergent quantity for very small loads.
• extent of soiling of the washing
• hardness of tap water
Observe instructions for use and dosing provided by the detergent and
conditioner manufacturer.
Using Water Softener
In the case of medium to very hard water (from hardness band II) water
softener should be used. Observe the manufacturer’s instructions! Then
always use detergent dosing for hardness band I (= soft). Information
on the hardness of the water in your area is provided by your local
water board.
Information on Water Hardness
Water hardness in °dH
(German hardness scale)
Water hardness in mmol/l
(millimol per litre)
I – soft
0–7
to 1.3
II – medium-hard
7 – 14
1.3 – 2.5
III – hard
14 – 21
2.5 – 3.8
greater than 21
greater than 3.8
Hardness Band
IV – very hard
15
Operating instructions
Performing a Washing Cycle
Brief Instructions
A washing cycle is performed in the following steps:
0 1. Open the door, load the washing.
2. Close the door.
3. Add detergent/conditioner.
4. Set the correct washing program:
– Set the program on the program selector;
– Set the temperature on the temperature selector;
– In the case of easy-care washing: Press the EASY-CARES button.
5. Press the ON/OFF button.
The washing machine is switched on. The washing program starts.
6. If necessary, change the spin speed or select rinse hold.
You can alter this setting and the temperature during the entire washing cycle.
At the end of the washing program:
Important! If the washing cycle ends with a rinse hold, perform either
PUMP OUT, SPIN or SHORT SPIN before opening the door.
3
16
For safety reasons, the door remains locked for 1-2 minutes after the
end of the program.
7. Open thedoor, remove the washing.
8. Press the ON/OFF button.
The washing machine is switched off.
Operating instructions
Loading the Washing
For maximum loads see the "Program Tables". For notes on the correct
preparation of the washing, see "Washing Types and Care Symbols".
0 1. Sort the washing by type and prepare.
2. Open the door: pull the handle on the door.
3. Load the washing.
Important! Do not trap any washing when closing
the door! The fabrics and the machine could be
damaged!
4. Close the door firmly.
3
Adding Detergent/Conditioner
For instructions concerning detergents and conditioners see
"Detergents and Conditioners".
0 1. Pull out the drawer to the stop.
2. Add detergent/conditioner.
3
k
Pre wash detergent or in-wash stain
treatment
(Only for PRE WASH and STAIN programs.)
l
Powdered main wash detergent and
water softener, if necessary.
(If you use water softener,
add the water softener on top of the
main wash detergent.)
Liquid conditioner
(softener, finisher, starch)
Important! Do not fill the compartment beyond the MAX mark. Thick
liquid detergents can be diluted up to the MAX mark, powdered starch
can be dissolved.
3. Push the drawer fully home.
w
When using liquid detergents:
Add liquid detergent using the dosing containers provided by the
detergent manufacturer. Observe the instructions on detergent pack.
17
Operating instructions
Setting the Washing Program
For suitable programs and the right temperature for the relevant type
of washing, see "Program Tables".
Important! Only turn the program
selector clockwise!
0 1. Set the program selector to the
desired washing program.
3
2. Set the temperature selector to
the desired temperature.
In the case of easy-care washing:
3. Press the EASY-CARES button.
3
The EASY-CARES button can only be combined with the programs in
the COTTONS/LINEN, EASY-CARES (+button) program group; in all other
cases the button has no effect.
Starting the Washing Program
0 1. Check whether the water tap is opened.
2. Switch on the washing machine:
Press the ON/OFF button.
The ON/OFF indicator illuminates,
the washing program starts.
18
Operating instructions
Changing the Spin Speed or Selecting Rinse Hold
0
If desired, reduce the spin speed for the final spin or
select rinse hold:
– Press the spin speedbutton or
– Press the RINSE HOLD button.
If RINSE HOLD is selected, the washing is left in the
last rinse water, it is not be spun.
3
If you do not reduce the spin speed, the final spin for all washing
programs is automatically performed at 1000 revolutions per minute.
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.
During the Washing Program
Program progress indicator
The program selector serves as a program progress indicator by rotating
in a clockwise direction to the end of the program. It is normal for the
rotation speed of the program selector to vary during the program.
Changing settings:
During the washing program you can:
– Change the spin speed
– Select RINSE HOLD
– Change the temperature setting
Other settings cannot be altered.
Stopping the program early:
0 1. Press the ON/OFF button.
2. Turn the program selector clockwise to PUMP OUT, SPIN or SHORT SPIN.
3. Press the ON/OFF button again.
The water is
– pumped out or
– pumped out and the washing then spun.
19
Operating instructions
Washing Cycle Complete/Removing the Washing
The washing program normally ends with the final spin.
After a rinse hold:
After a rinse hold the water must first be pumped out or the washing
spun:
0 1. Release the RINSE HOLD button.
2. Either turn the program selector clockwise to SPIN or SHORT SPIN
(the washing is spun according to the selected program and the spin
speed set)
or
turn the program selector clockwise to PUMP OUT
(the water is pumped out).
Once the program is finished:
For safety reasons, the door remains locked for 1-2 minutes after the
end of the program.
0 1. Open the door.
2. Remove the washing.
3. Press the ON/OFF button.
The indicator extinguishes, the washing machine is switched off.
4. Close the water tap.
5. Pull out the detergent drawer a little so that it can dry out. Leave the
door slightly ajar so that air can circulate in the washing machine.
3
Important! If the washing machine is not to be used for a long period:
close the tap and isolate the washing machine from the mains.
20
Operating instructions
Program Tables
Washing
Not all possible settings are given in the following, but only those that
are useful and meaningful in everyday use.
Washing Type,
Care Symbol
Max. Load
(weight dry)1)
Program
Selector
Temperature
Selector
Additional
Button
STAIN
Cottons
ç
5kg
MAIN WASH
70 to 95
QUICK WASH
Energy Saving
Program
Cottons ç
5kg
STAIN2)
E
STAIN
Linen
èë
5kg
MAIN WASH
30 to 60
QUICK WASH
STAIN
Easy-Cares
êíî
2.5kg
MAIN WASH
30 to 60
EASY-CARES
QUICK WASH
Delicates
ì
Woollens3)
9ì
2.5kg
(or 15-20m2
Net Curtains)
2kg
DELICATES
COLD
to 40
WOOL
COLD
to 40
1) A 10 litre bucket contains about 2.5kg of dry washing (cotton).
2) In order to achieve the same washing results when using the energy saving setting E (approx. 67 °C) as when using MAIN WASH 95, it is necessary to extend the
washing time. This is achieved using the STAIN setting.
3) Woollen garments with the woolmark may only be washed in the machine if they
are also marked with "does not produce fluff", "non-fluffing" or "washing
machine-safe".
21
Operating instructions
Washing with a Pre Wash
Type of Washing
Max. Load
(weight dry)
Cottons/Linen
Program
Selector
Temperature
Selector
5kg
Additional
Button
30 to 95
PRE WASH
Easy-Cares
2.5kg
30 to 60
EASY-CARES
Separate Rinsing
Type of Washing
Cottons/Linen
Max. Load
(weight dry)
Program Selector
Additional Button
5kg
RINSE
Easy-Cares
2.5kg
Delicates
2.5kg
Woollens
2kg
EASY-CARES
GENTLE RINSE
Separate Gentle Rinsing/Starching/Conditioning
Type of Washing
Cottons/Linen
Max. Load
(weight dry)
Program Selector
Additional Button
5kg
CONDITIONER
Easy-Cares
2.5kg
Delicates
2.5kg
Woollens
2kg
EASY-CARES
GENTLE RINSE
Separate Spinning
Type of Washing
Cottons/Linen
Max. Load
(weight dry)
Program Selector
Additional Button
5kg
SPIN
22
Easy-Cares
2.5kg
EASY-CARES
Delicates
2.5kg
SHORT SPIN
Woollens
2kg
SHORT SPIN
Operating instructions
Cleaning and Caring
Control panel
0
Attention! Do not use furniture care products or aggressive cleansers
for cleaning control panels and control elements.
Wipe control panels with a moist cloth. Use warm water.
Detergent drawer
The detergent drawer should be cleaned from time to time.
0 1. Pull the detergent drawer out as far as it will go.
2. Remove the detergent drawer by pulling sharply.
3. Remove siphon cap.
4. Clean the siphon cap under running
water.
5. Clean compartments with warm
water from the rear. For best results
use a bottle brush.
6. Push the siphon cap all the way on so
that it is securely seated.
7. Clean the entire compartment area of
the washing machine with a brush.
8. Set the detergent drawer into the guide tracks and push in.
23
Operating instructions
Washing drum
0
The washing drum is made of rust-free stainless steel. Rusty objects in
the washing drum may lead to rust deposits on the drum.
Attention! Do not clean the stainless steel drum with acid containing
decalcifying agents, abrasives containing chlorine or iron, or steel wool.
Appropriate cleansers are available from our customer service department.
Remove rust deposits at the drum with a stainless steel cleanser.
Fill-in door
0
24
Check on a regular basis to see if deposits or foreign objects are present
in or at the rubber sleeve behind the door, and remove.
Operating instructions
What to do when…
3
The somewhat different, in comparison to older washing machines, whistling noise during spinning is due to
the modern drive system.
A rattling sound on startup – in particular when using
for the first time – is caused by the circulation pump
and is due to the design.
Trouble Shooting
In the case of a malfunction try to solve the problem with the aid of
the notes given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
Malfunction
Possible Cause
Remedy
Washing machine does Mains plug is not plugged in. Insert mains plug.
not work.
House fuse in defective.
Replace fuse or reset.
The machine does not
take in water.
Washing machine
vibrates during operation or is unstable.
Door is not closed properly.
Close door, lock must engage
audibly
Tap is closed.
Open tap.
Sieve in the threaded fitting
on the water inlet hose is
blocked.
Unscrew the hose from the
tap, remove the sieve and
clean under running water
The height adjustable
threaded feet are not correctly adjusted.
Adjust the feet as per the
installation and connection
instructions.
There is only very little washing in the drum (e.g. only a
Function is not impaired.
towelling dressing gown).
Water cannot be completely
pumped out because
the drain hose is kinked
or
the circulation pump is
blocked.
Check the drain hose and if
necessary remove any kink or
clean the circulation pump
and remove any foreign bodies from the pump housing.
25
Operating instructions
Malfunction
Possible Cause
Remedy
Dose detergent exactly in
Excessive foaming dur- Probably too much detergent
accordance with the manuing the main wash.
was used
facturer’s instructions.
Threaded fitting on the
water inlet hose is leaking.
Tighten the water inlet hose
Drain hose is leaking.
Check drain hose and if necessary replace.
Circulation pump cover is
not closed properly.
Close cover properly.
Washing is trapped in the
door.
Stop program, remove washing from the door, start a
new program.
Softener is not washed
in, w compartment
for conditioner is full
with water.
Suction cap in the compartment for conditioner is not
correctly positioned or is
blocked.
Clean detergent drawer,
place suction cap firmly in
position.
Appliance does not
spin, water in the
drum.
Rinse Hold selected.
Deselect Rinse Hold.
Drain hose is kinked.
Remove kink.
Maximum pumping height
(drain height 1m above the
floor on which the machine
is standing) exceeded.
Please contact customer
service who have a retrofit
kit for pumping to heights of
greater than 1m.
Circulation pump is blocked.
Switch off the machine and
unplug from the mains, clean
the circulation pump.
In the case of siphon connection: siphon is blocked.
Clean siphon.
It is not possible to
open the door.
The door is locked for safety
reasons.
Wait 1-2 minutes after the
end of the program.
Rinse water is cloudy.
This is probably due to using No negative impact on the
a detergent with a high sili- rinsing results, try using liqcate content.
uid detergent.
Water runs out from
under the washing
machine.
Washing is not spun
properly, water is still
visible in the drum.
26
Operating instructions
If the washing results are not satisfactory
If the washing is grey and there are calcium deposits in the drum
• Too little detergent was used.
• The wrong detergent was used.
• Special soiling was not pre-treated.
• Program or temperature not set correctly.
• When using component detergents, the individual components were
not used in the correct proportions.
If there are still gray stains on the washing
• Washing soiled with ointments, grease or oils was washed with too
little detergent.
• Too lower temperature was used for washing.
• A common cause is that softener – particularly that in concentrated
form – has got onto the washing. Wash out any such spots as quickly
as possible and use that particular softener carefully.
If at the end of the last rinse foam is still visible
• Modern detergents can cause foam also in the last rinse. The washing
is however sufficiently rinsed.
If there are white remnants on the washing
• This is an insoluble material contained in modern detergents.
This is not the result of unsatisfactory rinsing.
Shake or brush the washing. Perhaps you should turn the washing
inside out before washing in future. Reconsider choice of detergent,
possibly use liquid detergent.
27
Operating instructions
Perform emergency drain
• If the washing machine no longer pumps out the water then an
emergency drain must be performed.
• If the washing machine is located in a room in which below freezing
temperatures might occur, emergency draining must be carried out if
danger of freezing occurs.
Furthermore, the inlet hose must be disconnected from the tap and
laid on the floor.
Warning! Switch the washing machine off and pull the mains plug
prior to emergency draining.
Attention! The water which runs out of the emergency draining hose
can be hot. There is a danger of scolding! Before an emergency drain
first allow the water to cool down!
0 1. Have a flat container on hand to catch the water running out.
2. Open the flap on the left of the pedestal
cover downwards and remove.
1
3. Remove the emergency drain hose from
the bracket.
4. Pull the emergency drain hose out a little.
5. Place the container under the hose.
6. Undo and remove the plug in the end of
the emergency drain hose by turning it in
an anti-clockwise direction.
The wash-water runs out. Depending
upon the amount of water, it may be
necessary to empty the container several
times. Temporarily close the emergency
drain hose with the plug to this end.
28
Operating instructions
When the water is completely drained:
7. Press the end stop firmly back into the emergency drain hose.
8. Push the emergency drain hose back in a little and allow it to snap into
the mounting.
9. Put on the flap and close.
The ECO valve does not function when the machine has been fully
emptied. Therefore add approx. 1liter of water before the next wash
(pour in through the detergent drawer).
3
Clean the circulating pump
Warning! Switch off the washing machine and pull the mains plug
before cleaning the circulation pump!
0 1. First perform emergency draining (see above: "Perform Emergency
Drain").
2. Lay a cloth on the floor in front of the circulation pump cover. Some
water may run out.
3. Unscrew the circulation pump cover in an
anti-clockwise direction and remove.
1
4. Remove foreign body from the pump
housing.
5. Check whether it is possible to turn the
pump impeller. (Jerky pump movement is
normal.) If it is not possible to turn the
impeller, contact customer service.
6. Replace cover (insert stud on the cover
into the guide slot) and tighten in a
clockwise direction.
7. Close emergency drain hose, push in and
fix in place.
8. Close the flap.
29
Installation and Connection Instructions
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installation Safety Precautions
• Do not tip the washing machine over the front or the left side (seen
from the front). Electrical components could become wet!
• Check the washing machine for transport damages. You should never
connect a damaged appliance. In the event of a damage consult your
dealer.
• Make certain that all shipping braces have been removed and that
the splash guard is attached to the appliance, see "Shipping Brace
Removal". Otherwise damage may occur to the machine or close by
furniture during the spin cycle.
• The plug may only be inserted into a properly installed earthing contact safety socket. Extension cables, octopus plugs or adapters may
not be used.
• For permanent connection a current interruption device must be provided for in the electrical circuit (fuse, circuit breaker, ground fault
circuit interrupter or the like) with a contact opening of at least
3 mm which allows for disconnection of the appliance at all poles.
Permanent connection may only be carried out by an authorised
electrician.
• Before starting your appliance please ensure that the nominal voltage and type of current specified on the rating plate are the same as
those used at the place of installation. Please also refer to the rating
plate for the type of fuse to be used.
• Prior to carrying out modifications on the appliance (on the worktop
or front door) pull out the mains plug.
• The mains feed-line may only be replaced by the customer service or
by an authorised electrician.
30
Installation and Connection Instructions
Dimensions of the Appliance
Front and Side Views
Rear View
Inlet for Hot Water
Inlet for Cold Water
31
Installation and Connection Instructions
Installation of the appliance
3
Washing machines with arched covers are not suited for installation
beneath countertops.
Transporting the appliance
• Do not lay the washing machine on the front or on the left side (seen
from the front); otherwise the electrical components could become
wet!
• Never transport the appliance without transportation protection.
Remove the protection only at the place of installation! Transportation without protection can lead to damages to the appliance.
• Neither lift the appliance by an open door nor by the base.
• The appliance weighs approx. 85kg.
• By transportation with a trolley: Place the trolley only sidewise.
Remove transportation protection
Attention! Be absolutely certain that all shipping braces have been
removed before installing the appliance.
Store all shipping braces in a safe place in case they are required for
future transport (moving).
32
Installation and Connection Instructions
Special spanner H and cover caps E (2 off) and G (1 off) are supplied
with the appliance.
0 1. Remove flexible tubing holder A.
2. Remove the two screws B with special spanner H.
3. Remove the four screws C.
4. Detach transportation rail D.
5. Close the two large openings with the cover caps E.
Attention! Press cover caps forcefully in, so that they snap into the
rear wall (protecting the interior of the appliance against sprayed
water).
6. Drive in the screws C into the four small holes again.
7. Remove the screw and compression spring F with special spanner H,
cover the hole with caps G.
Attention! Press cover caps forcefully in, so that they snap into the
rear wall (protecting the interior of the appliance against sprayed
water).
3
Prepare the installation place
• The installation surface must be clean and dry, free of floor wax and
other smearing substances, so that the appliance does not slip off. Do
not use any lubricant as sliding aid.
• Installation on a high-veil carpet or floor tiles with soft sponge backs
is not recommended because the standing safety of the appliance is
then no longer ensured.
• By installation surfaces with small-format tiles, lay a conventional
rubber mat underneath.
• Small unevenness of the floor surface should never be levelled out by
laying pieces of wood, carton or similar elements, but rather basically
compensated by adjusting the screw feet.
• When it is unavoidable to install the appliance besides a gas or a
coal-fuelled cooker, due to spatial reasons: insert a piece of heatinsulating board (85 x 57 cm) between the cooker and the washing
machine; the board side facing the cooker must be provided with an
aluminium foil.
• The washing machine may not be installed in a frost-endangered
room. Frost-caused damages!
• Flexible feed and drain tubings may not be crinkled or squeezed.
33
Installation and Connection Instructions
Installation on a concrete base
When installing on a concrete base,
for safety reasons it is imperative
that steel plates are installed, the
washing machine is then installed in
these plates. The steel plates are
available from customer service
under ET-No. 645 425 058.
Installation on vibrating
floors
In the case of floors that vibrate, especially wooden floors with floorboards that flex, a water-proof wooden panel of at least 15 mm thickness must be firmly screwed to at least 2 floor beams. If possible, install
the appliance in a corner of the room: the wooden floor is more firmly
supported in the corners and thus has less tendency to resonant vibration.
Levelling on uneven floors
Using the four adjustable threaded feet, compensation can be made for
unevenness in the floor and the height of the appliance adjusted. The
height can be adjusted over the range +10... -5 mm.
To adjust the feet use the special spanner supplied for removing the
transport braces.
0 1. Slide the special key firmly onto the hexagon head of the threaded foot
all the way to the stop.
2. Adjust the threaded feet so that the appliance is level and sits stably.
The appliance must not rock across the corners when operating under
load.
3. If necessary, check positioning with a spirit level.
Important! Never compensate for small areas of unevenness in the
floor through the use of wooden wedges, cardboard or the like. Levelling should only ever be performed by adjusting the feet.
34
Installation and Connection Instructions
Power supply
Details on the mains voltage,
type of current and the necessary fuse protection are to be
found on the rating plate. The
rating plate is above and
behind the door.
For permanent electrical connection within the electrical
circuit, provisions must be made which allow for electrical disconnection of the appliance from the mains with a contact opening of at least
3 mm at all poles. Suitable devices include circuit breakers, fuses
(threaded fuses must be entirely removed from the socket), ground
fault circuit interrupters and contactors. Permanent connection may
only be carried out by an authorised electrician.
;
This appliance conforms to the following EC directives
– "Low-Voltage Directive" 73/23/EWG dated 19 February 1973
and Directive amendment 93/68/EWG
– "EMC Directive" 89/336/EWG dated 3 May 1989
and Directive amendment 93/68/EWG
Water Connection
3
Your washing machine is fitted with safety devices that prevent drinking water contamination and comply with the regulations of the water
authorities in your country (e.g. in Germany: DVGW Directives). It is
therefore not necessary to take further protective measures in the
installation.
Permissible water pressure
Water pressure must be equal to a least 1 bar (= 10N/cm2 = 0.1 MPa),
and no more than 10 bar (= 100N/cm2 = 1 MPa).
• By more than 10 bar: connect a pressure reduction valve upstream.
• By less than 1 bar: Unscrew the flexible inlet tubing on the magnetic
inlet valve on one side of the appliance and remove the flow meter
(thereby remove the sieve by means of a pair of pointed pliers and
then remove the rubber washer behind it). Remount the sieve.
35
Installation and Connection Instructions
Water feed
A flexible pressure tubing of 1.3m length is supplied.
If a longer feed tubing is needed, a complete VDE-approved tubing set
with mounted screw connections, supplied by our customer service,
should be used exclusively.
– For washing machines without Aqua-Control, tubing sets are
available in lengths of 2.2m, 3.5m and 5m.
– For washing machines with Aqua-Control, tubing sets are available
in lengths of 2.0m, 2.9m and 3.9m.
Attention! Under no circumstances may tubing be pieced together for
the purpose of lengthening!
Sealing rings are either inserted in plastic nuts of the tubing screw connection or contained in an accompanying packet. Do not use other
seals.
0 1. Connect the angled hose connector to the
machine.
3
Attention! Plastic nut at the tube coupling
may only be hand tightened.
2. Connect the straight hose connector to a water tap
with an R 3/4 (inch) thread.
Attention! Only tighten the plastic nuts on the
hose connectors by hand.
3. By opening the water tap slowly prior to the initial
operation, check whether the connection is tight.
36
Installation and Connection Instructions
Hot and Cold Water Connection
Appliances designed for connecting to hot and cold water supplies can
be connected up to the hot and cold water taps as per the diagram
below. The hose set supplied is approved for use with hot and cold
water.
Important! The hot water temperature must not exceed 70 °C.
hot
cold
hot
If an appliance designed for connecting to hot and cold water supplies
is to be connected to a cold water tap only, an adapter is available from
customer service under ET No. 645.430 709.
37
Installation and Connection Instructions
Water drain-off
The drain-off tubing can be connected either to a siphon or be hanged
in a washing or sink basin or in a bathtub.
For extension (max. 3 m floor length and up to 80 cm high) only original tubing may be used. The customer service supplies drain-off tubing
of 2.7 and 4m lengths.
0
0
Water drain-off inside a siphon
The spout at the end of the tubing fits all common siphon types.
Make the connection spout/siphon secure with a tubing clip.
Water drain-off inside a basin
For hanging in a wash basin, sink or bath,
the drain hose must be prevented from
moving using the detachable elbow supplied.
The tube could otherwise be pushed out of
the basin by the reactive force imparted by
draining water.
Small sink basins are not suitable!
Fasten the elbow on the water tap or on
the wall by means of the hole.
Delivery heights above 1m
Every washing machine is provided with a suds pump for draining the
washing/rinsing suds, which can deliver liquids via the drain-off tubing
up to a height of 1m, measured from the standing level of the machine.
For delivery heights above 1m please establish contact with the AEG
customer service.
38
Guarantee Conditions/ Service Departments
Technical data
Height x Width x Depth
Depth with open door
Height adjustment
Weight when empty
Load (depending on the program)
Area of use
Wash cycle drum speed
Spin cycle drum speed
Water pressure
85x60x60cm
95cm
approx. +10/-5mm
approx. 85kg
max. 5kg
Household
max. 53min-1 r.p.m.
see type plate
1-10bar
(=10–100N/cm2 = 0.1 – 1.0MPa)
GUARANTEE CONDITIONS/
SERVICE DEPARTMENTS
Weitere Kundendienststellen im Ausland
In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden.
Further after-sales service agencies overseas
In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct.
Autres agences étrangères assurant le service après-vente
Dans ces pays, les conditions de garantie des concessionnaires de la
région sont valables. Vous pouvez les consulter sur place.
Otros puntos de Postventa en el extranjero
En estos países rigen las condiciones de nuestros representantes locales.
las cuales pueden ser consultadas allí mismo.
Ulteriori uffici del servizio tecnico assistenza clienti all’estero
In questi paesi sono valide le condizioni di garanzia dei partner locali.
Queste condizioni possono essere esaminante sul luogo.
Serviços de assistência técnica no estrangeiro
Nestes países são válidas as condições de garantia dos concessionários
locais, podendo aí ser consultadas.
39
Guarantee Conditions/ Service Departments
40
U.A.E. Abu Dhabi
Universal Trading Company
P.O. Box 43 99
Tel.: 335331
Jordan
Jordan Household
Supply Co. Ltd.
P.O. Box 3/68
Amman/Tel.: 69 70 50
Malta
ITC
International Trading Company
White House Building
Mountbatte Street
Blata L-Bajda/Tel.: 220644
Egypt
Middle East Commercial
Center
P.O. Box 19
Kairo-Heliopolis
Tel.: 29917/31634
Kanada
EURO-LINE Appliances
2150 Winston PARK Drive 20
Oakville, Ontario L6H 5V1
Tel.: 905 829 3980
Fax: 905 829 3985
Mauritius
Happy World Centre Ltd.
P.O. 7 54
1 Chausee Street
Port Louis
Tel.: 25355
Australia
ANDI-Co Pty. Ltd
9 Kingston Town Close
Oakleigh VIC 3166
Tel.: (03) 9569 1235
Fax: (03) 9569 1450
Korea (South)
Core Incorp.
3/F Chewoo Bldg.
200 Nonhyun-Dong
Kangnam-Ku
Seoul
Telefon 82 2 549 89 61
Namibia
AEG NAMIBIA (PTY) LIMITED-Jeppe Street
Northern Industrial Area
Windhoek
Tel.: (061) 21-6082/4
Fax: (061) 217838
Bahrain/Arabian Gulf
A.A. Zayani & Sons
P.O. Box 9 32
Bahrain
Tel.: 261060
Croatia
Electrolux D.O.O.
Suplova 7
10000 Zagreb
Tel.: 1 61 19512
Fax: 1 61 19513
New Zealand
Euro-Life New Zealand Ltd.
Privat Bag
58 Symonds Street
Auckland
Tel.: (09) 525 2222
Bulgaria
Electrolux Bulgaria E.O.O.D.
91 Levski Blvd.
1000 Sofia
Tel.: 2 806676
Fax. 2 980 5276
Kuwait/Arabian Gulf
Ali Al-Ghanim Est.
P.O. Box 10 83
Tel.: 5322463
Fax: 5242114
Nouvelle Caledonie
Socometra N.C.
B.P. 483
Nouman
Tel.: 275444
Cyprus
Servilan Co. Ltd.
P.O. Box 36 05
77, Kennedy Ave.
Nicosia
Tel.: 311 477
Lebanon
Adib & Assaferi
P.O. Box 539
Tripoli
Oman
Moshin Haider Darwish
P.O. Box 1 35
Muscat
Tel.: 703743
Guarantee Conditions/ Service Departments
Estonia
Electrolux Estonia Ltd.
Mustamäe tee 24
EE0006 Tallinn
Tel.: (372) 6 650 090
Fax: (372) 6 650 092
Latavia
Electrolux Latavia Ltd.
Terlaton Street 42/44
1011 Riga
Tel.: 371 2 297821
Fax: 371 2 821286
Poland
Electrolux Poland Sp. zo.o.
ul. Domaniewska 41
02-034 Warszawa
tel.: 022 874 33 33
fax: 022 874 33 00
Hongkong
Wo Kee Services Ltd.
585-609 Castle Peak Road
Kwai Chung N.T.
Hongkong
Tel.: 2494 4000
Lthuania
Electrolux Lthuania
Verkui 29
2600 Vilnus
Tel.: 372 272 3326
Fax: 372 272 3366
Russia
Electrolux Russia Ltd.
16 Olympiysky prospekt
129090 Moscow
Tel.: (095) 937 7837
Fax: (095) 926 5513
Israel
Evis Ltd.
P.O. Box 70 39
Tel-Aviv – 67013
Tel.: 3257311
Malaysia
Arzbergh Engineering
No. 49A/B, Jalan Petaling
Utama 7
4600 Petaling Jaya
Tel.: 3 795 1084
Fax: 3 795 1082
Saudi Arabia
Alia Trading Corporation
P.O. Box 4101
King Abdul Aziz Street
Riyadh
Tel.: 4645977
Al Nahas Est.
Musaidia Market I
P.O. Box 1 15 29
Jeddah
Tel.: 6606852
Singapore
Japan
Arzbergh Engineering
Electrolux Japan Ltd.
Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07
Singapore 247909
Heiwajima Ota-Ku
Tel.: 65 7356572
Tokyo
Fax: 7351124
Tel.: 81 3 3544 3363
Fax: 81 3 3763 6143
Slovenia
Electrolux Slovenia D.O.O.
Traska Ul. 132
1000 Ljubljana
Tel.: 61 1234 137
Fax: 61 1234 238
Thailand
OLYMPIA Thai Ltd.
44 Ratchadapisek Road
10320 Bangkok
Tel.: 2 513 6111
Fax: 2 513 2574
Slovakia Rep.
Electrolux Slovakia S.R.O.
Seberiniho 1
821 03 Bratislava
Tel.: 7 4333 9745
Fax: 7 4333 6976
South Africa
AEG (Pty) Ltd.
55, 12th Road
P.O. Box 1 02 64
Kew/Johannesburg 2000
Tel.: 8069111
Hungary
Electrolux Lehel KFT
(AEG Div)
Erzsebet’Kiralyne Utja 87
1142 Budapest
Tel.: 00361/251 84 44
USA
ANDI Co. Appl. Inc. East
65 Campus Plaza
Edison, New Jersey 0837
USA/Tel.: (201) 2258839
Syria
Masri & Shami
P.O. Box 24 96
Damascus
Tel.: 214080
41
Index
INDEX
C
P
Calcium . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Conditioner . . . . . . . . . . . . 9, 11, 15, 17, 22
liquid . . . . . . . . . . . . . . . . . . . . . . . . . .9, 17
Cotton Mixtures . . . . . . . . . . . . . . . . . . . . . 14
Cottons . . . . . . . . . . . . . . . . . . 10, 14, 21, 22
Customer service . . . . . . . . . . . . . . 24, 25, 43
Pre Wash . . . . . . . . . . . . . . . . . . . . . . . . 11, 17
Pre Wash Detergent . . . . . . . . . . . . . . . . . . .17
Program Progress . . . . . . . . . . . . . . . . . . . . .19
Pump Out . . . . . . . . . . . . . . . . . . . . . . . 11, 20
D
R
Danger of freezing . . . . . . . . . . . . . . . . .6, 28
Delicates . . . . . . . . . . . . . . . . . 11, 14, 21, 22
Detergent . . . . . . . . . . . . . . . . . . . . . 9, 15, 17
E
Quick Wash . . . . . . . . . . . . . . . . . . . . . . 10, 21
Rating Plate . . . . . . . . . . . . . . . . . . .9, 35, 43
Rinse Hold . . . . . . . . . . . . . . . . 10, 11, 19, 20
S
Gentle Rinse . . . . . . . . . . . . . . . . . . . . . .11, 22
Guarantee . . . . . . . . . . . . . . . . . . . . . . . .6, 25
Short Spin . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Silk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Softener . . . . . . . . . . . . . . . . . . . . . . .8, 9, 17
Spin . . . . . . . . . . . . . . . . . . . . . 10, 11, 19, 22
Stain . . . . . . . . . . . . . . . . . 8, 10, 17, 21, 27
Starching . . . . . . . . . . . . . . . . . . . . . . . . 11, 22
Stopping the Program . . . . . . . . . . . . . . . . .19
H
W
Hot/Cold Water Connection . . . . . 12, 31, 37
Washing
coloured . . . . . . . . . . . . . . . . . . . . . . . . . .13
delicate . . . . . . . . . . . . . . . . . . . . . . . 13, 14
easy-care . . . . . . . . . . . . . . . . . . . . . . . . . .14
lightly soiled . . . . . . . . . . . . . . . . . . . . . . . . 8
normally soiled . . . . . . . . . . . . . . . . . . . . . . 8
starching . . . . . . . . . . . . . . . . . . . . . . . 9, 17
Water
circulation pump . . . . . . . . . . . . . . . . 9, 29
emergency drain . . . . . . . . . . . . . . . . . . .28
hardness . . . . . . . . . . . . . . . . . . . . . . . 8, 15
pump out . . . . . . . . . . . . . . . . . . . . . 11, 20
softener . . . . . . . . . . . . . . . . . . . . .8, 15, 17
Woollens . . . . . . . . . . . . . . . . . 11, 14, 21, 22
Easy-Cares . . . . . . . . . . . . 10, 14, 18, 21, 22
ECO Valve . . . . . . . . . . . . . . . . . . . . . . . .13, 29
Energy Saving . . . . . . . . . . . . . . . . . . . .12, 21
G
I
In-Wash Stain Treatment . . . . . . . . . . . .9, 17
L
Linen . . . . . . . . . . . . . . . . . . . . 10, 14, 21, 22
Liquid detergent . . . . . . . . . . . . . . . . . . . . . 17
M
Main Wash . . . . . . . . . . . . . . . . . . . . . . .10, 21
Main Wash Detergent . . . . . . . . . . . . . . . . . 17
N
Net Curtains . . . . . . . . . . . . . . . . . . 13, 14, 21
O
Open Door . . . . . . . . . . . . . . . 16, 17, 20, 26
42
Q
Service
SERVICE
If a malfunction should occur at the appliance, refer first to the section
"What to do when ..." in these user instructions. If you do not find any
applicable instructions there, contact your customer service centre.
(Addresses and telephone number can be found in the "Service Departments" section.)
Be well prepared before you phone. This facilitates the diagnosis and
the decision as to whether a customer service visit is necessary. With
our checklist you can gather important information before making
your call:
Make a note of the PNC number and
the S-number.
Both of these number can be found
on the rating plate on the inside of
the door of your washing machine.
PNC
......................................................
S-No. ......................................................
In addition to this please establish if possible:
• How is the malfunction noticeable ?
• Under what circumstances does the malfunction occur?
You will be charged even during the warranty period
– if you could have corrected the malfunction yourself with the help of
the malfunctions table (see "What to do when ..." section),
– if the customer service technician is required to make several trips
because he had not received all relevant information before his visit,
and must return, for example, to pick up replacement parts. This
additional driving can be avoided if your telephone call is well prepared, as described above.
43
AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg
http://www.aeg.hausgeraete.de
© Copyright by AEG
822 942 079 - 01 - 0600