Multichannel setup guide WMS4500

Wolfgang Fritz
01/2012
1
SCHEMATIC & PART LIST 1-32 CHANNEL
WMS4500 MULTICHANNEL SETUP GUIDE
Introduction
The following schematics will help you to easily set up multi channel systems.
Please use the equipment that is specified in the schematics only.
For your convenience and understanding, we’ve added technical information and part lists.
You can use this part lists when ordering the system you require! If you need any help
regarding the frequency regulations or if your particular situation doesn’t allow the installation
of a standard system, please do not hesitate to contact us at sales@akg.com.
All the WMS4500 systems in this document are designed with active antennas that can be
used in all venues with a 20m RG58 antenna cable.
SRA2 B/W active directional antenna
For venues (tour sound &installs) cover a large area (up to 150m, 500ft) like music halls,
stadiums and other open air applications.
2
01 / 2012
WMS4500
RA4000 B/W active omni-directional antenna
For venues without a designated transmitter area and up to 100m/330ft (free viewing
direction). Ideal for conference rooms, multi purpose halls, houses of worship etc.
General Information
Receiver/Antenna Placement
Squelch
Intermodulation
HUB4000Q - HiQnet System Architect
Cable Attenuation
PS4000 dip switch
AB4000 dip switch
PS4000 dip Switch Matrix
Required Component Matrix
Glossar
Information
Information
Information
Information
Information
Information
Information
Information
Information
Information
Page
4
4
4
5
6
6
6
7
8
9
Antenna Type
SRA2 B/W
Schematic / Part List
Page
11
1 Channel
RA4000 B/W
Schematic / Part List
13
2 Channel no PS4000W
SRA2 B/W
Schematic / Part List
15
2 Channel no PS4000W
RA4000 B/W
Schematic / Part List
17
2 Channel no PSU4000
SRA2 B/W
Schematic / Part List
19
2 Channel no PSU4000
RA4000 B/W
Schematic / Part List
21
4 Channel no PSU4000
SRA2 B/W
Schematic / Part List
23
4 Channel no PSU4000
RA4000 B/W
Schematic / Part List
25
5 Channel no PSU4000
SRA2 B/W
Schematic / Part List
27
5 Channel no PSU4000
RA4000 B/W
Schematic / Part List
29
6 Channel no PSU4000
SRA2 B/W
Schematic / Part List
31
6 Channel no PSU4000
RA4000 B/W
Schematic / Part List
33
8 Channel no PSU4000
SRA2 B/W
Schematic / Part List
35
8 Channel no PSU4000
RA4000 B/W
Schematic / Part List
37
9 Channel no PSU4000
SRA2 B/W
Schematic / Part List
39
9 Channel no PSU4000
RA4000 B/W
Schematic / Part List
41
10 Channel
SRA2 B/W
Schematic / Part List
43
10 Channel
RA4000 B/W
Schematic / Part List
45
12 Channel
SRA2 B/W
Schematic / Part List
47
12 Channel
RA4000 B/W
Schematic / Part List
49
16 Channel
SRA2 B/W
Schematic / Part List
51
16 Channel
RA4000 B/W
Schematic / Part List
53
24 Channel
SRA2 B/W
Schematic / Part List
55
24 Channel
RA4000 B/W
Schematic / Part List
58
32 Channel
SRA2 B/W
Schematic / Part List
61
32 Channel
RA4000 B/W
Schematic / Part List
64
WMS4500
WMS System
1 Channel
3
01 / 2012
Content
Technical Information
Wireless Basics
Ø
Ø
Ø
Every wireless microphone system has to operate on one specific frequency
Transmitter and receiver of a system need to work on the same frequency
Two transmitters cannot be used with one receiver at the same time
Receiver/Antenna Placement
Ø Direct line of sight between transmitter and receiver antenna
Ø Keep the receiver/antennas at least 5 ft. (1.5 m) away from all transmitters
Ø Keep the receiver antennas at least 5 ft. (1.5 m) away from any big metal object, wire
(particularly wire mesh) or sheet metal structures, walls, ceilings, etc.
Ø Do not place the antennas in closed areas (behind walls)
Ø Place the receiver at least 5 ft. (1.5 m) away from any equipment that may emit RF
radiation such as lighting racks, fluorescent lamps, digital effect units, or PCs
Squelch
Ø Standard: Carrier squelch, manual
– Operates strictly on the signal strength of the signal.
– If received signal strength drops under the adjustable squelch threshold the
audio output is muted
Ø Advanced: Tone Code (only WMS470/4500)
– The audio turns on only in the presence of the correct tone code and an
adequate signal strength (-100dbm)
– Lock out of all signals except ones with the correct key.
Intermodulation
Intermodulation is the result of two or more signals of different frequencies
being mixed together, forming additional signals that are not harmonic
frequencies of either.
4
01 / 2012
To avoid intermodulating frequencies, we offer pre-calculated frequencies as
presets in the SR450 and SR4500 Receiver. Please, make sure that when setting
up a multi channel system, all your receivers are set to the same country preset
(NAME) and group. Use the automatic channel function (auto setup) to scan for
free frequencies in your venue.
WMS4500
By using more than one transmitter simultaneously at the same location,
intermodulation happens in the receiver and/or transmitter. These
intermodulation products are generated in the bandwidth that you are using.
HUB 4000 Q
The HUB 4000 Q adds HiQnet functionality to an AKG wireless system (SR 4500, SST 4 and
upcoming devices are supported). For large wireless systems multiple HUB 4000 Q’s can be used and
controlled from a single computer. With connecting the HUB 4000 Q to a HiQnet network the user is
able to monitor and control an AKG wireless system from a computer running System Architect.
HiQnet System Architect
The simple and easy to use user interface of the HUB 4000 Q plug in of System Architect allows the
user to setup and configure the wireless system easy and fast. With tools like Auto Setup,
Environment Scan, RF Monitor and Device Manager you have all the control over your multi channel
WMS system that makes your life easier handling many RF channels.
HiQnet System Architect also allows custom configuration of custom made user interfaces which
makes it a perfect tool for installed sound and tour sound applications.
Today's HiQnet system is build from flagship products from Harman Pro brands AKG Acoustics,
BSS Audio, Crown International, dbx Professional, JBL Professional, Lexicon Pro, Soundcraft and
Studer.
AKG User Interface
Features
Ø automatic identification of all HUB4000Q’s
Ø Simple and easy to use channel-oriented user interface
Ø Fast and intuitive setup and configuration of frequency management with Auto Setup,
Enviroment Scan and Device Manager
Ø Offline configuration
Ø Save and load your setup
5
01 / 2012
Device Manager – Frequency Management
WMS4500
Enviroment Scan - Frequency Graph
Cable Attenuation
To obtain the best sound possible, you need to have the right RF input level throughout
your signal chain. Premium quality wireless systems like the WMS450/470 and
WMS4500, offer you adjustable RF-level settings that garantee to maximise operating
distance even when using different cable lenghts and different types of cable! For this
purpose, AKG’s PS4000W antenna splitter, has 3 dip switches that you’ll find on the right
side of it’s front panel, behind the AKG logo.
RG58 Cable Attenuation (MKPS, MKA5, MKA20 antenna cable)
PS4000 dip switch
These switches reduce the input RF level of the antenna input between 0 dB and 14 dB.
Levels of all antenna outputs and the cascade (link) output will be reduced.
PS4000W – Power Splitter
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
Ant. B
(DC power)
4x Antenna A output
(DC power)
dip switches behind AKG Logo
AB4000 dip switch
The AB4000 has a fix 17.5dB amplifier in the output stage. The dip switches reduce the
input RF level of the AB4000 from 0 dB and -14 dB. AB4000 gets the DC power from the
PS4000W or an ASU4000 unit via the antenna cable
AB4000 – Antenna Booster
Signal level adjustment
Total Gain
3.5 dB
5.5 dB
7.5 dB
13.5 dB
15.5 dB
17.5 dB
6
01 / 2012
9.5 dB
11.5 dB
WMS4500
Internal
Attenuation
PS4000 W dip switch matrix (RG58 cable)
Passiv Antennas
Active Antennas
Antenna type
&
Gain
RA4000 W
SRA2 W
RA4000 BW
SRA2 BW
1 dB
4-6 dB
17 dB
21.5 dB
MKPS
0.65m / 2ft
0 dB
0 dB
-4 dB
MKA 5
5m / 16ft
0 dB
0 dB
-2 dB
MKA 20
20m / 66ft
-8 dB
-12 dB
MKA 5 + MKA 20
25m / 82ft
-6 dB
-10 dB
2x MKA 20
40m / 132ft
0 dB
-2 dB
RA4000 BW
3x MKA 20
60m / 198ft
Antenna Booster
AB4000
necessary !
2x MKA 20
2x MKA 20
AB4000
0 dB
AB4000
0 dB
1x MKA 20
1x MKA 20
PS4000
-4 dB
RA4000 BW
4x MKA 20
80m / 264ft
Antenna Booster
AB4000
necessary !
SRA2 BW
PS4000
-8 dB
SRA2 BW
2x MKA 20
2x MKA 20
AB4000
0 dB
AB4000
0 dB
2x MKA 20
2x MKA 20
PS4000
0 dB
PS4000
0 dB
You have to use these PS4000 W dip switch settings for all PS4000 W directly
connected to antennas.
All PS4000 W connected to a PS4000 W link output (cascade)
have dip switch setting ON/ON/ON (0dB)
7
01 / 2012
¼ wave
UHF Antenna
0 dB
WMS4500
Cable type
&
Length
WMS450/470/4500 Component Matrix
2x Antennas (e.g. SRA2 B/W or RA4000 B/W)
2x MKA 20 (see PS4000W dip switch matrix)
plus…
PS4000 ZAPD-21
1
0
1
0
1
0
1
0
2
0
2
0
2
0
2
0
3
0
3
0
3
0
3
0
4
2
4
2
4
2
4
2
4
2
5
2
5
2
5
2
5
2
6
2
6
2
6
2
6
2
9
0
9
0
13
0
13
0
MKPS
4
6
8
10
14
16
18
20
24
26
28
30
36
38
40
42
44
48
50
52
54
58
60
62
64
80
88
120
128
Power Supplies
PSU4000
0
0
0
0
0
0
0
0
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
5
5
AC12
500mA
0
0
0
1
0
0
0
1
0
0
0
1
0
0
0
0
0
0
0
0
1
0
0
1
2
0
0
0
0
AC12
2000mA
1
1
1
1
2
2
2
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
PC Monitoring with
System Architect
HUB4000Q
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
5
6
7
PSU4000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
1
1
1
1
1
1
1
1
1
2
AC12
500mA
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
2
0
2
2
0
0
0
0
1
1
1
2
1
1
8
01 / 2012
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
32
36
48
52
Antenna Components
WMS4500
WMS
Receiver
Glossar
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500 – WMS4500 Stationary Receiver
▼
Mixer
ANT A IN
ANT B IN
PS4000W
4B
4A
3A
2B
2A
1B
1A
3B
CASCADE B
CASCADE A
DC IN (12V/0.5A)
PSU4000
~90-230V
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
AC POWER
SRA2 B/W
PS4000W – Power Splitter 1:4 (Distribute RF signal and DC Power)
● Splits 1 antenna to 4 receiver
● Antenna cascade(Link) output to send RF-Signal to next PS4000.
Cascade max. 3 PS4000.
If you need more than 12 channels use an ZAPD in front of the first PS4000.
PSU4000 – Power Supply Unit with 3x 12 volt outputs (2.5A and 2A)
SRA2 B/W – Active Directional Antenna (21.5 dB Gain)
ANT OUT
RA4000 B/W – Active Omni-directional Antenna (17 dB Gain)
RA4000 B/W
ANT OUT
CU4000
CU4000 – Charging Unit for WMS4000/4500 (2 transmitter / unit)
DC IN (12V/1.4A)
S
ZAPD-21 – Passive Combiner 2:1 and 1:2
ZAPD-21
A
B
ANT IN
ASU4000 – Antenna Supply Unit
ASU4000
DC IN (12V/0.5A)
ANT OUT
● Supplies up to three active elements (RA4000BW, SRA2BW, AB4000)
ANT IN
AB4000 – Antenna Booster
AB4000
ANT OUT
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
● 3.5 dB – 17.5 dB amplifier
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
HUB4000Q – Network Concentrator for 8 devices (SR4500 or SST4)
● Operate with Harman „System Architect“ software - http://hiqnet.harmanpro.com
Cable
MKPS – 0.65m/2 feet RG58 antenna cable
MKA5 – 5m/16ft RG58 antenna cable
MKA20 – 20/66ft RG58 antenna cable
0110E01890 – Front mount cable
● Install ¼ wave antennas at the front of the rack
9
01 / 2012
WMS4500
Front mount cable & ¼ wave antenna
10
01 / 2012
WMS4500
1 Channel WMS4500 System
With directional antennas & 40m antenna cable (132 feet)
SRA2 B/W
SRA2 B/W
ANT OUT
ANT OUT
2x MKA20
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
2x MKA20
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
ANT IN
ANT IN
ASU4000
AC12 Power Supply (500mA)
ASU4000
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
DC IN (12V/0.5A)
ANT OUT
ANT OUT
2xMKPS
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
DEV 5
DEV 8
PC
DHCP Switch
DC IN
2 HT4500 or PT4500 charging system (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
MCS0802001
1 channel WMS4500 system
(SRA2 B/W – Antennas)
11
1.0
1 Channel WMS4500 System with directional antennas, no PSU4000, no PS4000W
units
description
comment
1
SR 4500
70
1
HT 4500 or PT4500
48
2
SRA 2 B/W
72
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
External directional active "paddle" antenna with amplifier (2 req.)
2
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
4
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
ASU4000 (BNC)
10
Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter
3
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
BNC I-connector
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
1
CU 4000
1
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
12
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
1 Channel WMS4500 System
with omni-directional antennas & 25m antenna cable (82 feet)
RA4000 B/W
RA4000 B/W
ANT OUT
ANT OUT
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
ANT IN
ANT IN
ASU4000
AC12 Power Supply (500mA)
ASU4000
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
DC IN (12V/0.5A)
ANT OUT
ANT OUT
2xMKPS
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
DEV 5
DEV 8
PC
DHCP Switch
DC IN
2 HT4500 or PT4500 charging system (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
MCS0802001
1 channel WMS4500 system
(RA4000 B/W – Antennas)
13
1.0
1 Channel WMS4500 System with omni-directional antennas, no PSU4000, no PS4000W
units
description
comment
1
SR 4500
70
1
HT 4500 or PT4500
48
2
RA4000 B/W
66
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
External omni-directional active dipoleantenna with amplifier (2 req.)
2
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
MKA 5
56
16.5 ft. (5m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
ASU4000 (BNC)
10
Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter
3
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
BNC I-connector
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
1
CU 4000
1
AC12 Studio
K171
1500mA EU/US/UK7
AC12 500mA EU/US/UK 4
1
1
1
HUB4000 Q / none
39
50
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
14
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
2 Channel WMS4500 System
With directional antennas & 40m antenna cable (132 feet)
SRA2 B/W
SRA2 B/W
ANT OUT
ANT OUT
2x MKA20
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
2x MKA20
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
ANT IN
ANT IN
ASU4000
AC12 Power Supply (500mA)
ASU4000
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
DC IN (12V/0.5A)
ANT OUT
ANT OUT
2xMKPS
S
S
ZAPD-21
ZAPD-21
A
A
B
ANT A IN
ANT B IN
B
4xMKPS
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
AC12 Power Supply (500mA)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
▼
Mixer
DEV8
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
2 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
2 channel WMS4500 system
(SRA2 B/W – Antennas, no PS4000, PSU4000)
15
2 Channel WMS4500 System with directional antennas, no PSU4000, no PS4000
units
description
comment
2
SR 4500
70
2
HT 4500 or PT4500
48
2
SRA 2 B/W
72
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
External directional active "paddle" antenna with amplifier (2 req.)
6
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
4
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
ASU4000 (BNC)
10
Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter
4
AC12 500mA EU/US/UK 4
2
ZAPD21
2
BNC I-connector
88
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
passive power combiner (2in 1out) or Splitter (1in 2out)
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
1
CU 4000
1
AC12 Studio
K171
1500mA EU/US/UK7
AC12 500mA EU/US/UK 4
1
1
1
HUB4000 Q / none
39
50
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
16
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
2 Channel WMS4500 System
with omni-directional antennas & 25m antenna cable (82 feet)
RA4000 B/W
RA4000 B/W
ANT OUT
ANT OUT
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
ANT IN
ANT IN
ASU4000
AC12 Power Supply (500mA)
ASU4000
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
DC IN (12V/0.5A)
ANT OUT
ANT OUT
2xMKPS
S
S
ZAPD-21
ZAPD-21
A
A
B
ANT A IN
ANT B IN
B
4xMKPS
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
AC12 Power Supply (500mA)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
▼
Mixer
DEV8
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
2 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
2 channel WMS4500 system
(RA4000 B/W – Antennas, no PS4000, PSU4000)
17
2 Channel WMS4500 System with omni-directional antennas, no PSU4000, no PS4000
units
description
comment
2
SR 4500
70
2
HT 4500 or PT4500
48
2
RA4000 B/W
66
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
External omni-directional active dipoleantenna with amplifier (2 req.)
6
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
MKA 5
56
16.5 ft. (5m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
ASU4000 (BNC)
10
Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter
4
AC12 500mA EU/US/UK 4
2
88
ZAPD21
2
BNC I-connector
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
passive power combiner (2in 1out) or Splitter (1in 2out)
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
1
CU 4000
1
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
18
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
2 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
SRA2 B/W
SRA2 B/W
ANT OUT
ANT OUT
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
MKA20
dip switches behind AKG Logo
1xMKA20
(20m Cable)
-12dB
ANT A IN
2xMKA20
(40m Cable)
up
-2dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A) (recommend) or
AC12 1500mA Power Supply (1.5A)
4xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
2 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
19
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
2 channel WMS4500 system
(SRA2 B/W – Antennas, no PSU4000)
2 Channel WMS4500 System with directional antennas, no PSU4000
units
description
comment
2
SR 4500
70
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
2
HT 4500 or PT4500
48
1
PS4000 W
59
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
Connecting cable for PS to SR 2.15ft (65cm)
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
4
MK PS
54
2
MKA 20
55
1
AC12 2000mA EU/US/UK8
2
MKA 20
2
BNC I-connector
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
Additional parts for 40m(132feet) Antenna Cable
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
1
CU 4000
1
AC12 1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
50
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
20
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
2 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
MKA20
dip switches behind AKG Logo
1xMKA20
(20m Cable)
ANT A IN
2xMKA20
(40m Cable)
up
-8dB
0dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A) (recommend) or
AC12 1500mA Power Supply (1.5A)
4xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
2 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
21
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
2 channel WMS4500 system
(RA4000 B/W – Antennas, no PSU4000)
2 Channel WMS4500 System with omni-directional antennas, no PSU4000
units
description
comment
2
SR 4500
70
2
HT 4500 or PT4500
48
1
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
4
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
AC12 2000mA EU/US/UK8
2
MKA 20
2
BNC I-connector
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
Additional parts for 40m(132feet) Antenna Cable
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
1
CU 4000
1
AC12 1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
22
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
4 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
SRA2 B/W
SRA2 B/W
ANT OUT
ANT OUT
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
MKA20
dip switches behind AKG Logo
1xMKA20
(20m Cable)
-12dB
ANT A IN
2xMKA20
(40m Cable)
up
-2dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A)
8xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
4 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
23
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
4 channel WMS4500 system
(SRA2 B/W – Antennas, no PSU4000)
4 Channel WMS4500 System with directional antennas, no PSU4000
units
description
comment
4
SR 4500
70
4
HT 4500 or PT4500
48
1
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
8
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
Additional parts for 40m(132feet) Antenna Cable
2
55
MKA 20
2
BNC I-connector
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
2
CU 4000
1
AC12 Studio
K171
1500mA EU/US/UK7
AC12 500mA EU/US/UK 4
2
1
1
HUB4000 Q / none
39
50
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000, (you can also use a PSU4000 output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
24
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
4 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
MKA20
dip switches behind AKG Logo
1xMKA20
(20m Cable)
ANT A IN
2xMKA20
(40m Cable)
up
-8dB
0dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A)
8xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
Network Concentrator (optional)
HUB4000Q
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
4 HT4500 or PT4500 charging system (optional)
DEV 5
DEV 8
PC
DHCP Switch
DC IN
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
25
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
4 channel WMS4500 system
(RA4000 B/W – Antennas, no PSU4000)
4 Channel WMS4500 System with omni-directional antennas, no PSU4000
units
description
comment
4
SR 4500
70
4
HT 4500 or PT4500
48
1
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
8
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
Additional parts for 40m(132feet) Antenna Cable
2
55
MKA 20
2
BNC I-connector
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
2
CU 4000
1
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
26
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
5 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
1xMKA20
(20m Cable)
ANT A IN
2xMKA20
(40m Cable)
up
-12dB
-2dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A)
10xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
6 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DEV 8
PC
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
27
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
5 channel WMS4500 system
(SRA2 B/W – Antennas)
5 Channel WMS4500 System with directional antennas
units
description
comment
5
SR 4500
70
5
HT 4500 or PT4500
48
1
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
10
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
AC12 2000mA EU/US/UK8
1
AC12 500mA EU/US/UK 4
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
3
CU 4000
3
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
28
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
5 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
1xMKA20
(20m Cable)
ANT A IN
2xMKA20
(40m Cable)
up
-8dB
0dB
ANT B IN
PS4000W
down
4B
4A
CASCADE B
CASCADE A
3B
2B
2A
1B
1A
DC IN (12V/0.5A)
3A
AC12 2000mA Power Supply (2A)
10xMKPS
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
AC12 Power Supply (500mA)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
6 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DC IN
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 4
DEV 6
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DEV 8
PC
DC IN (12V/1.4A)
Date
Designer
Project
29
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
5 channel WMS4500 system
(RA4000 B/W – Antennas)
5 Channel WMS4500 System with omni-directional antennas
units
description
comment
5
SR 4500
70
5
HT 4500 or PT4500
48
1
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
10
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
AC12 2000mA EU/US/UK8
1
AC12 500mA EU/US/UK 4
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
3
CU 4000
3
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
30
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
6 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
-2dB
ANT B IN
ANT A IN
4B
4A
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-12dB
8xMKPS
ANT A IN
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
6 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DC IN
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 4
DEV 6
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DEV 8
PC
DC IN (12V/1.4A)
Date
Designer
Project
31
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
6 channel WMS4500 system
(SRA2 B/W – Antennas)
6 Channel WMS4500 System with directional antennas
units
description
comment
6
SR 4500
70
6
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
14
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
3
CU 4000
3
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
50
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
32
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
6 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
0dB
ANT B IN
ANT A IN
4B
4A
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-8dB
8xMKPS
ANT A IN
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
6 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DC IN
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 4
DEV 6
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DEV 8
PC
DC IN (12V/1.4A)
Date
Designer
Project
33
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
6 channel WMS4500 system
(RA4000 B/W – Antennas)
6 Channel WMS4500 System with omni-directional antennas
units
description
comment
6
SR 4500
70
6
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
14
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
3
CU 4000
3
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
1
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
1
50
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
34
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
8 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
-2dB
ANT B IN
ANT A IN
4B
4A
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-12dB
8xMKPS
ANT A IN
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
8 HT4500 or PT4500 charging system (optional)
DC IN
CU4000
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DEV 1
DEV 2
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 3
DEV 4
DEV 6
DEV 7
DEV 5
DEV 8
PC
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
35
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
8 channel WMS4500 system
(SRA2 B/W – Antennas)
8 Channel WMS4500 System with directional antennas
units
description
comment
8
SR 4500
70
8
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
18
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
4
4
1
description
CU 4000
39
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
AC12 500mA EU/US/UK 4
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
36
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
8 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
0dB
ANT B IN
ANT A IN
4B
4A
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-8dB
8xMKPS
ANT A IN
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
HUB4000Q
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
8 HT4500 or PT4500 charging system (optional)
DC IN
CU4000
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DEV 1
DEV 2
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 3
DEV 4
DEV 6
DEV 7
DEV 5
DEV 8
PC
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
Designer
Project
37
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
8 channel WMS4500 system
(RA4000 B/W – Antennas)
8 Channel WMS4500 System with omni-directional antennas
units
description
comment
8
SR 4500
70
8
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
18
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
4
4
1
description
CU 4000
39
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
AC12 500mA EU/US/UK 4
1
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
38
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
9 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
-2dB
ANT B IN
ANT A IN
4B
4A
8xMKPS
ANT A IN
2xMKPS
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-12dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
ANT A IN
SR4500
AC12 Power Supply (500mA)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DC IN (12V/0.5A)
ETHERNET
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
HUB4000Q
HUB4000Q
AC12 Power Supply (500mA)
DEV5
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
10 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DEV 8
PC
Designer
DC IN (12V/1.4A)
Project
39
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
9 channel WMS4500 system
(SRA2 B/W – Antennas)
9 Channel WMS4500 System with directional antennas
units
description
comment
9
SR 4500
70
9
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
20
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
1
AC12 500mA EU/US/UK 4
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
5
39
comment
5
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
CU 4000
2
50
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
40
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
9 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
AC12 2000mA Power Supply (2A)
AC12 2000mA Power Supply (2A)
2xMKPS
0dB
ANT B IN
ANT A IN
4B
4A
8xMKPS
ANT A IN
2xMKPS
CASCADE B
CASCADE A
3B
1A
DC IN (12V/0.5A)
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
PS4000W
CASCADE B
CASCADE A
3A
PS4000W
2B
ANT A IN
down
1B
-8dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
8xMKPS
ANT B IN
ANT A IN
SR4500
AC12 Power Supply (500mA)
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
HUB4000Q
HUB4000Q
AC12 Power Supply (500mA)
DEV5
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
AC12 Power Supply (500mA)
ETHERNET
DC IN (12V/0.5A)
ETHERNET
10 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
DEV 8
PC
Designer
DC IN (12V/1.4A)
Project
41
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
9 channel WMS4500 system
(RA4000 B/W – Antennas)
9 Channel WMS4500 System with omni-directional antennas
units
description
comment
9
SR 4500
70
9
HT 4500 or PT4500
48
2
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
20
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
AC12 2000mA EU/US/UK8
1
AC12 500mA EU/US/UK 4
12V AC-Adapter (EU-Version) power supply CU4000, PS4000 W (you can also use a PSU4000
output)
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
MKA 20
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
55
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
5
CU 4000
5
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
42
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
10 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2xMKPS
ANT A IN
SR4500
4B
4A
3B
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
down
CASCADE B
CASCADE A
4xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
1B
1A
8xMKPS
up
ANT B IN
PS4000W
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT A IN
CASCADE B
CASCADE A
3B
1A
4B
4A
3B
3A
2B
2A
1B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
CASCADE B
CASCADE A
2B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
down
0dB
2xMKPS
down
2A
-2dB
2B
-12dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
1B
AC POWER
1A
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV8
HUB4000Q
ETHERNET
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
10 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
PC
DEV 8
~90-230V
Designer
DC IN (12V/1.4A)
Project
43
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
10 channel WMS4500 system
(SRA2 B/W – Antennas)
10 Channel WMS4500 System with directional antennas
units
description
comment
10
SR 4500
70
10
HT 4500 or PT4500
48
3
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
24
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
5
CU 4000
5
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
44
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
10 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2xMKPS
ANT A IN
SR4500
4B
4A
3B
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
down
CASCADE B
CASCADE A
4xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
1B
1A
8xMKPS
up
ANT B IN
PS4000W
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT A IN
CASCADE B
CASCADE A
3B
1A
4B
4A
3B
3A
2B
2A
1B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
CASCADE B
CASCADE A
2B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
down
0dB
2xMKPS
down
2A
0dB
2B
-8dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
1B
AC POWER
1A
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV8
HUB4000Q
ETHERNET
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
10 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Date
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
PC
DEV 8
~90-230V
Designer
DC IN (12V/1.4A)
Project
45
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
10 channel WMS4500 system
(RA4000 B/W – Antennas)
10 Channel WMS4500 System with omni-directional antennas
units
description
comment
10
SR 4500
70
10
HT 4500 or PT4500
48
3
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
24
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
5
CU 4000
5
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
46
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
12 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
SRA2 B/W
PS4000W – Power Splitter
SRA2 B/W
Signal level adjustment
Rear View
ANT OUT
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2xMKPS
4B
4A
3B
SR4500
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
1B
1A
8xMKPS
ANT A IN
SR4500
ANT A IN
down
CASCADE B
CASCADE A
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
up
ANT B IN
PS4000W
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT A IN
CASCADE B
CASCADE A
3B
1A
4B
4A
3B
3A
2B
2A
1B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
CASCADE B
CASCADE A
2B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
down
0dB
2xMKPS
down
2A
-2dB
2B
-12dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
1B
AC POWER
1A
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV8
HUB4000Q
ETHERNET
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
12 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
DC IN (12V/1.4A)
DC IN
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
PC
DEV 8
~90-230V
CU4000
AC-CU4000 Power Supply (1.4A)
Date
Designer
DC IN (12V/1.4A)
Project
47
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
12 channel WMS4500 system
(SRA2 B/W – Antennas)
12 Channel WMS4500 System with directional antennas
units
description
comment
12
SR 4500
70
12
HT 4500 or PT4500
48
3
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
28
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
6
CU 4000
6
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
48
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
dip switches behind AKG Logo
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2xMKPS
4B
4A
3B
SR4500
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
1B
1A
8xMKPS
ANT A IN
SR4500
ANT A IN
down
CASCADE B
CASCADE A
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
up
ANT B IN
PS4000W
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT A IN
CASCADE B
CASCADE A
3B
1A
4B
4A
3B
3A
2B
2A
1B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
CASCADE B
CASCADE A
2B
ANT B IN
PS4000W
DC IN (12V/0.5A)
3A
ANT A IN
down
0dB
2xMKPS
down
2A
0dB
2B
-8dB
up
0dB
2xMKA20
(40m Cable)
up
2A
1xMKA20
(20m Cable)
1B
AC POWER
1A
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV6
DEV7
DEV5
DEV8
DEV1
DEV2
DEV3
DEV5
DEV4
▼
Mixer
DEV6
HUB4000Q
ETHERNET
AC12 Power Supply (500mA)
DC IN (12V/0.5A)
ETHERNET
AC12 Power Supply (500mA)
12 HT4500 or PT4500 charging system (optional)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DEV 1
DEV 2
DEV 3
DEV 4
DEV 6
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
DC IN (12V/1.4A)
DC IN
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 7
DHCP Switch
CU4000
AC-CU4000 Power Supply (1.4A)
DEV 5
PC
DEV 8
~90-230V
DEV7
T
PS4000W – Power Splitter
RA4000 B/W
DEV8
TA
UT
12 Channel WMS4500 System
with omni-directional antennas & 20(40)m antenna cable (66 or 132 feet)
CU4000
AC-CU4000 Power Supply (1.4A)
Date
Designer
DC IN (12V/1.4A)
Project
49
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
12 channel WMS4500 system
(RA4000 B/W – Antennas)
12 Channel WMS4500 System with omni-directional antennas
units
description
comment
12
SR 4500
70
12
HT 4500 or PT4500
48
3
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
28
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
1
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
39
comment
6
CU 4000
6
K171 Studio
AC12
1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 4
12V AC-Adapter for 1 ASU4000, AB4000, HUB4000Q or SR4500.
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
50
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
16 Channel WMS4500 System
with directional antennas & 20(40)m antenna cable (66 or 132 feet)
PS4000W – Power Splitter
SRA2 B/W
SRA2 B/W
ANT OUT
ANT OUT
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
MKA20
PSU4000
PSU4000
To PS4000W No.3
To PS4000W No.4
To HUB4000Q DC IN
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
S
S
ZAPD-21
ZAPD-21
A
B
A
B
4xMKPS
ANT A IN
4B
4A
3B
3A
2B
2A
1A
4B
4A
3B
CASCADE A
8xMKPS
ANT B IN
▼
Mixer
ANT B IN
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV8
▼
Mixer
DEV7
ANT A IN
DC IN (12V/0.5A)
SR4500
SR4500
ANT A IN
down
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
CASCADE A
3A
1A
ANT B IN
▼
Mixer
ANT A IN
ANT A IN
4 PS4000W
CASCADE B
8xMKPS
SR4500
ANT A IN
DC IN (12V/0.5A)
8xMKPS
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT B IN
1B
ANT A IN
3 PS4000W
CASCADE B
4B
4A
8xMKPS
ANT A IN
0dB
down
CASCADE A
3B
DC IN (12V/0.5A)
4B
CASCADE A
4A
2B
2A
1B
DC IN (12V/0.5A)
3A
down
-8dB
down
ANT B IN
2 PS4000W
CASCADE B
2B
ANT A IN
2xMKPS
2A
ANT B IN
3A
ANT A IN
1 PS4000W
CASCADE B
up
0dB
2xMKA20
(40m Cable)
up
1B
0dB
ANT A IN
1xMKA20
(20m Cable)
2xMKPS
1A
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
ETHERNET
CU4000
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
Date
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Designer
CU4000
CU4000
Project
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
51
DEV 1
DEV 2
DHCP Switch
CU4000
DC IN
AC-CU4000 Power Supply (1.4A)
DEV 3
DEV 4
DEV 5
DEV 6
DEV 7
PC
16 HT4500 or PT4500 charging system (optional)
DEV 8
-8dB
up
0dB
2xMKA20
(40m Cable)
up
3B
1xMKA20
(20m Cable)
2B
AC POWER
2A
~90-230V
dip switches behind AKG Logo
To PS4000W No.1
To PS4000W No.2
To HUB4000Q DC IN
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
1B
AC POWER
1A
~90-230V
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
16 channel WMS4500 system
(SRA2 B/W – Antennas)
16 Channel WMS4500 System with directional antennas
units
description
comment
16
SR 4500
70
16
HT 4500 or PT4500
48
4
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
40
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
PSU4000
60
2
ZAPD21
88
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
passive power combiner (2in 1out) or Splitter (1in 2out)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
8
8
2
1
description
CU 4000
39
K171 Studio
AC12
500mA EU/US/UK
1500mA
EU/US/UK 7
HUB4000 Q / none
50
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
52
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
16 Channel WMS4500 System
with omni-directional antennas & 20m antenna cable (66 feet)
PS4000W – Power Splitter
RA4000 B/W
RA4000 B/W
ANT OUT
Signal level adjustment
Rear View
Attenuation
ANT OUT
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
MKA20
MKA20
PSU4000
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
To PS4000W No.3
To PS4000W No.4
To HUB4000Q DC IN
S
S
ZAPD-21
ZAPD-21
A
B
A
B
4xMKPS
1xMKA20
(20m Cable)
up
1xMKA20
(20m Cable)
up
0dB
-4dB
ANT A IN
ANT B IN
4B
4A
3B
3A
2B
1B
1A
4B
4A
3B
3A
CASCADE A
8xMKPS
ANT B IN
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV8
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV8
▼
Mixer
DEV7
ANT A IN
DC IN (12V/0.5A)
▼
Mixer
▼
Mixer
ANT A IN
CASCADE A
SR4500
SR4500
ANT A IN
down
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
2B
1A
ANT B IN
▼
Mixer
ANT A IN
ANT A IN
4 PS4000W
CASCADE B
8xMKPS
SR4500
ANT A IN
ANT B IN
8xMKPS
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT A IN
3 PS4000W
CASCADE B
DC IN (12V/0.5A)
4B
8xMKPS
ANT A IN
down
CASCADE A
4A
DC IN (12V/0.5A)
4B
4A
3B
CASCADE A
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
down
ANT B IN
2A
ANT A IN
2 PS4000W
CASCADE B
1B
ANT B IN
2xMKPS
3B
ANT A IN
1 PS4000W
CASCADE B
3A
down
up
0dB
up
2xMKPS
2A
-4dB
2B
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
AC12 Power Supply (500mA)
ETHERNET
AC12 Power Supply (500mA)
CU4000
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
HUB4000Q - Network Concentrator (optional)
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
Date
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
Designer
CU4000
CU4000
Project
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
53
DEV 1
DEV 2
DHCP Switch
CU4000
DC IN
AC-CU4000 Power Supply (1.4A)
DEV 3
DEV 4
DEV 5
DEV 6
DEV 7
PC
16 HT4500 or PT4500 charging system (optional)
DEV 8
AC POWER
dip switches behind AKG Logo
To PS4000W No.1
To PS4000W No.2
To HUB4000Q DC IN
2A
~90-230V
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
1B
AC POWER
1A
~90-230V
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
16 channel WMS4500 system
(RA4000 B/W – Antennas)
16 Channel WMS4500 System with omni-directional antennas
units
description
comment
16
SR 4500
70
16
HT 4500 or PT4500
48
4
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
40
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
PSU4000
60
2
ZAPD21
88
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
passive power combiner (2in 1out) or Splitter (1in 2out)
Optional Components
units
description
39
comment
8
CU 4000
8
AC12 1500mA EU/US/UK7
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
AC12 500mA EU/US/UK 7
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
2
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
54
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
PSU4000
ANT OUT
To PS4000W No.1
To PS4000W No.2
To PS4000W No.3
MKA20
PSU4000
To PS4000W No.4
To PS4000W No.5
To PS4000W No.6
ZAPD-21
A
B
A
B
0dB
1xMKA20
(20m Cable)
8xMKPS
ANT A IN
ANT B IN
2xMKPS
ANT A IN
ANT B IN
ANT A IN
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
3A
2B
ANT B IN
ANT A IN
▼
Mixer
ANT B IN
ANT A IN
▼
Mixer
ANT B IN
ANT A IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
ANT A IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
DEV1
DEV2
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
▼
Mixer
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
ETHERNET
PC
DEV 8
DC IN (12V/0.5A)
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV3
ANT A IN
▼
Mixer
DEV4
ANT B IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV5
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV6
ANT B IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
▼
Mixer
24 channel WMS4500 system
(SRA2 B/W – Antennas)
▼
Mixer
SR4500
SR4500
Project
ANT B IN
SR4500
DEV7
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
1.0
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
MCS0802001
ANT B IN
DEV8
ANT B IN
SR4500
Ref.No.
▼
Mixer
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Wolfgang Fritz
ANT B IN
SR4500
SR4500
▼
Mixer
Revision
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
55
DEV 1
ANT A IN
SR4500
15.01.2012
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Designer
▼
Mixer
▼
Mixer
▼
Mixer
Date
ANT B IN
SR4500
ANT B IN
SR4500
To HUB4000Q DC IN
To HUB4000Q DC IN
To HUB4000Q DC IN
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
PSU4000
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
▼
Mixer
▼
Mixer
SR4500
8xMKPS
ANT B IN
SR4500
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
DC IN (12V/0.5A)
8xMKPS
ANT A IN
▼
Mixer
ANT A IN
ANT A IN
6 PS4000W
CASCADE B
CASCADE A
8xMKPS
ANT B IN
SR4500
ANT B IN
ANT B IN
5 PS4000W
CASCADE B
DC IN (12V/0.5A)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500
ANT A IN
ANT A IN
down
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2xMKPS
ANT B IN
SR4500
▼
Mixer
AC POWER
down
0dB
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500
ANT A IN
ANT A IN
4 PS4000W
CASCADE B
DC IN (12V/0.5A)
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
2A
down
▼
Mixer
ANT A IN
ANT B IN
CASCADE A
8xMKPS
SR4500
ANT A IN
ANT A IN
3 PS4000W
CASCADE B
DC IN (12V/0.5A)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
up
DEV8
ANT A IN
0dB
4B
4A
3B
1A
4B
4A
3B
3A
2B
2A
1B
1A
ANT B IN
CASCADE A
1B
ANT A IN
2 PS4000W
CASCADE B
DC IN (12V/0.5A)
1A
ANT B IN
CASCADE A
3A
ANT A IN
1 PS4000W
CASCADE B
DC IN (12V/0.5A)
down
~90-230V
2xMKA20
(40m Cable)
up
-8dB
2xMKPS
0dB
2B
up
2A
-8dB
2xMKPS
2xMKA20
(40m Cable)
1B
1xMKA20
(20m Cable)
up
4xMKPS
DEV 2
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
S
ZAPD-21
DEV 3
AC POWER
MKA20
S
DEV 4
~90-230V
24 Channel WMS4500 System
with directional antennas &
20(40)m antenna cable (66 or 132 feet)
DEV 6
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
ANT OUT
DEV 7
AC POWER
SRA2 B/W
DEV 5
~90-230V
SRA2 B/W
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
DHCP Switch
DC IN
HUB4000Q - Network Concentrator (optional)
24 Channel WMS4500 Charging System
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
If you don’t want to use PSU4000 for optional components, you can also use
12x AC-CU4000 Power Supply for CU4000's and
3x AC12 Power Supply for the HUB4000Q’s
PS4000W Technical Information
PS4000W – Power Splitter
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
dip switches behind AKG Logo
Date
Designer
Project
56
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
24 channel WMS4500 charging system
24 Channel WMS4500 System with directional antennas
units
description
comment
24
SR 4500
70
24
HT 4500 or PT4500
48
6
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
60
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
PSU4000
60
2
ZAPD21
88
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
passive power combiner (2in 1out) or Splitter (1in 2out)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
12
CU 4000
39
5
PSU4000
60
3
HUB4000 Q / none
50
1
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
57
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
RA4000 B/W
PSU4000
MKA20
To PS4000W No.1
To PS4000W No.2
To PS4000W No.3
PSU4000
To PS4000W No.4
To PS4000W No.5
To PS4000W No.6
A
B
A
B
1xMKA20
(20m Cable)
ANT A IN
ANT B IN
ANT A IN
SR4500
HUB4000Q
4B
4A
3B
3A
1B
1A
4B
4A
3B
3A
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV5
DEV6
DEV7
DEV8
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
ETHERNET
PC
DEV 8
DC IN (12V/0.5A)
2B
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
2A
▼
Mixer
ANT B IN
SR4500
ANT B IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV7
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
24 channel WMS4500 system
(RA4000 B/W – Antennas)
ANT B IN
▼
Mixer
▼
Mixer
Project
▼
Mixer
SR4500
ANT B IN
ANT B IN
SR4500
DEV8
ANT A IN
SR4500
1.0
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
MCS0802001
ANT B IN
▼
Mixer
▼
Mixer
Ref.No.
▼
Mixer
SR4500
ANT B IN
ANT B IN
SR4500
58
DEV 1
ANT A IN
SR4500
Wolfgang Fritz
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Revision
ANT B IN
▼
Mixer
▼
Mixer
15.01.2012
▼
Mixer
SR4500
ANT B IN
ANT B IN
SR4500
DEV 2
ANT A IN
SR4500
Designer
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
Date
ANT B IN
▼
Mixer
▼
Mixer
To HUB4000Q DC IN
To HUB4000Q DC IN
To HUB4000Q DC IN
▼
Mixer
SR4500
ANT B IN
ANT B IN
SR4500
DEV 3
ANT A IN
SR4500
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
PSU4000
ANT B IN
DEV 4
ANT B IN
▼
Mixer
ANT A IN
▼
Mixer
▼
Mixer
SR4500
8xMKPS
ANT B IN
SR4500
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
6 PS4000W
CASCADE B
DC IN (12V/0.5A)
8xMKPS
ANT A IN
▼
Mixer
ANT A IN
ANT B IN
CASCADE A
8xMKPS
ANT B IN
SR4500
ANT B IN
ANT A IN
2xMKPS
5 PS4000W
CASCADE B
DC IN (12V/0.5A)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
SR4500
ANT A IN
down
ANT B IN
CASCADE A
DEV 6
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT A IN
4 PS4000W
CASCADE B
DC IN (12V/0.5A)
8xMKPS
ANT B IN
▼
Mixer
ANT A IN
2B
down
SR4500
ANT A IN
ANT B IN
CASCADE A
8xMKPS
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT A IN
2xMKPS
3 PS4000W
CASCADE B
DC IN (12V/0.5A)
4B
4A
3B
8xMKPS
ANT A IN
up
3A
0dB
CASCADE A
3A
2B
1A
4B
4A
3B
3A
2B
2A
1B
1A
ANT B IN
2 PS4000W
CASCADE B
DC IN (12V/0.5A)
1B
ANT A IN
2xMKPS
1A
ANT B IN
CASCADE A
2A
ANT A IN
1 PS4000W
CASCADE B
DC IN (12V/0.5A)
1B
down
ANT A IN
down
up
-4dB
2xMKPS
2B
up
2A
-4dB
AC POWER
up
2A
1xMKA20
(20m Cable)
~90-230V
0dB
4xMKPS
DEV 7
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
ZAPD-21
DEV 5
AC POWER
S
ZAPD-21
DEV1
~90-230V
MKA20
S
DEV2
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DEV3
AC POWER
ANT OUT
DEV4
~90-230V
24 Channel WMS4500 System
with omni-directional antennas &
20m antenna cable (66 feet)
RA4000 B/W
ANT OUT
DHCP Switch
DC IN
HUB4000Q - Network Concentrator (optional)
24 Channel WMS4500 Charging System
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
If you don’t want to use PSU4000 for optional components, you can also use
12x AC-CU4000 Power Supply for CU4000's and
3x AC12 Power Supply for the HUB4000Q’s
PS4000W Technical Information
PS4000W – Power Splitter
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
dip switches behind AKG Logo
Date
Designer
Project
59
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
24 channel WMS4500 charging system
24 Channel WMS4500 System with omni-directional antennas
units
description
comment
24
SR 4500
70
24
HT 4500 or PT4500
48
6
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
60
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
PSU4000
60
2
ZAPD21
88
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
passive power combiner (2in 1out) or Splitter (1in 2out)
Optional Components
units
description
12
CU 4000
39
5
PSU4000
60
3
HUB4000 Q / none
50
1
DHCP Net Switch + CAT5 Cable
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
60
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L
PSU4000
1xMKA20
(20m Cable)
ANT OUT
MKA20
2xMKA20
(40m Cable)
up
-12dB
2B
1A
2A
DC IN (12V/0.5A)
To PS4000W No.7
To PS4000W No.8
To PS4000W No.9
CASCADE A
down
8xMKPS
up
up
0dB
2xMKPS
▼
Mixer
ANT B IN
ANT A IN
SR4500
▼
Mixer
ANT B IN
ANT A IN
SR4500
ANT B IN
ANT A IN
SR4500
15.01.2012
Revision
1.0
Designer
Wolfgang Fritz
Ref.No.
MCS0802001
Project
32 channel WMS4500 system
(SRA2 B/W – Antennas)
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
To HUB4000Q DC IN
To HUB4000Q DC IN
To HUB4000Q DC IN
61
4B
4A
3B
1B
1A
4B
4A
3B
3A
2B
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
PC
PSU4000
2A
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
DC IN (12V/0.5A)
ANT B IN
SR4500
HUB4000Q
ETHERNET
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4A
3B
3A
2B
2A
4B
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
Date
ANT B IN
SR4500
HUB4000Q
DC IN (12V/0.5A)
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV8
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
AC12 Power Supply (500mA)
To HUB4000Q DC IN
DEV 1
SR4500
▼
Mixer
DEV 2
ANT A IN
ANT B IN
SR4500
DEV1
ANT B IN
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV 3
▼
Mixer
ANT B IN
SR4500
DHCP Switch
DC IN
DEV1
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV2
ANT B IN
SR4500
▼
Mixer
DEV2
ANT A IN
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DEV 4
ANT B IN
SR4500
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV3
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV4
ANT A IN
▼
Mixer
DEV5
ANT B IN
SR4500
ANT B IN
SR4500
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV3
ANT A IN
ANT B IN
SR4500
DEV 5
ANT B IN
▼
Mixer
DEV6
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
SR4500
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
3A
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DEV4
ANT A IN
▼
Mixer
DEV 6
ANT B IN
SR4500
ANT A IN
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
▼
Mixer
ANT B IN
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV5
▼
Mixer
ANT B IN
SR4500
SR4500
CASCADE A
▼
Mixer
DEV 7
ANT A IN
DC IN (12V/0.5A)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
9 PS4000W
CASCADE B
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT A IN
8xMKPS
ANT A IN
DEV 8
ANT B IN
8xMKPS
ANT B IN
SR4500
▼
Mixer
SR4500
DC IN (12V/0.5A)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
ANT B IN
8 PS4000W
CASCADE B
CASCADE A
8xMKPS
ANT A IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DC IN (12V/0.5A)
ANT A IN
down
7 PS4000W
CASCADE B
CASCADE A
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DC IN (12V/0.5A)
ANT B IN
DEV6
ANT A IN
ANT A IN
DEV7
ANT B IN
ANT B IN
6 PS4000W
CASCADE B
CASCADE A
▼
Mixer
SR4500
ANT A IN
DC IN (12V/0.5A)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
5 PS4000W
CASCADE B
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT A IN
DEV8
ANT A IN
SR4500
ANT A IN
2xMKPS
ANT B IN
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT A IN
DEV7
8xMKPS
2B
1A
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT B IN
4 PS4000W
CASCADE B
CASCADE A
3B
2B
2A
1A
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
ANT A IN
down
3 PS4000W
CASCADE B
CASCADE A
3A
2 PS4000W
CASCADE B
DC IN (12V/0.5A)
ANT B IN
2A
ANT A IN
1B
ANT B IN
1B
ANT A IN
3A
0dB
2B
AC POWER
ANT B IN
1 PS4000W
CASCADE B
2A
~90-230V
MKA20
ANT A IN
-2dB
PSU4000
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
32 Channel WMS4500 System
with directional antennas &
20(40)m antenna cable (66 or 132 feet)
4B
To PS4000W No.4
To PS4000W No.5
To PS4000W No.6
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
AC POWER
SRA2 B/W
ANT OUT
4A
PSU4000
~90-230V
SRA2 B/W
3B
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
3A
To PS4000W No.1
To PS4000W No.2
To PS4000W No.3
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
AC POWER
1B
~90-230V
ETHERNET
HUB4000Q - Network Concentrator (optional)
32 Channel WMS4500 Charging System
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
DC IN (12V/1.4A)
If you don’t want to use PSU4000 for optional components, you can also use
16x AC-CU4000 Power Supply for CU4000's and
8x AC12 Power Supply for the HUB4000Q’s and HPA4000's
PS4000W Technical Information
PS4000W – Power Splitter
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
dip switches behind AKG Logo
Date
Designer
Project
62
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
32 channel WMS4500 charging system
32 Channel WMS4500 System with directional antennas
units
description
comment
32
SR 4500
70
32
HT 4500 or PT4500
48
9
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
2
SRA 2 B/W
72
External directional active "paddle" antenna with amplifier (2 req.)
80
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
3
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
Additional parts for 40m(132feet) Antenna Cable
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
16
CU 4000
39
1
AC12 1500mA EU/US/UK7
6
PSU4000
1
AC12 500mA EU/US/UK 4
60
4
HUB4000 Q / none
1
DHCP Net Switch + CAT5 Cable
50
comment
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 (you can also use a PSU4000
output)
Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to
12AC-Adapter
receivers viaforPS
4000,
Mains
Cable HUB 4000, HPA 4000 or SR 4000.
12V
1 PS
4000,
ASU4000,
Network concentrator without AC-Adapter; of 8 systems
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
63
01 / 2012
description
WMS450/470
units
PSU4000
RA4000 B/W
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
MKA20
2xMKA20
(40m Cable)
MKA20
ANT A IN
0dB
ANT B IN
1 PS4000W
CASCADE B
DC IN (12V/0.5A)
1A
PSU4000
To PS4000W No.7
To PS4000W No.8
To PS4000W No.9
CASCADE A
down
8xMKPS
up
up
0dB
2xMKPS
▼
Mixer
ANT B IN
ANT A IN
SR4500
▼
Mixer
ANT A IN
ANT B IN
ANT A IN
SR4500
15.01.2012
Revision
1.0
Designer
Wolfgang Fritz
Ref.No.
MCS0802001
32 channel WMS4500 system
(SRA2 B/W – Antennas)
4B
4A
3B
3A
1B
1A
4B
4A
3B
3A
2B
2A
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
DC IN (12V/0.5A)
ANT B IN
SR4500
HUB4000Q
ETHERNET
1B
1A
4B
4A
3B
3A
2B
2A
1B
1A
4A
3B
3A
2B
2A
1B
4B
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV7
DEV8
Date
ANT B IN
SR4500
HUB4000Q
DC IN (12V/0.5A)
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV8
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
HUB4000Q
ETHERNET
DC IN (12V/0.5A)
ETHERNET
PC
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
To HUB4000Q DC IN
To HUB4000Q DC IN
To HUB4000Q DC IN
64
AC12 Power Supply (500mA)
To HUB4000Q DC IN
DEV 1
▼
Mixer
▼
Mixer
DEV 2
ANT A IN
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DEV1
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV 3
▼
Mixer
ANT B IN
SR4500
DEV1
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV2
ANT B IN
SR4500
▼
Mixer
DEV2
ANT A IN
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DEV 4
ANT B IN
SR4500
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV3
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV4
ANT A IN
▼
Mixer
DEV5
ANT B IN
SR4500
ANT B IN
SR4500
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV3
ANT A IN
ANT B IN
SR4500
DEV 5
ANT B IN
▼
Mixer
DEV6
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
SR4500
Project
1A
4B
4A
3B
3A
2B
2A
1B
1A
4B
4A
3B
3A
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT B IN
SR4500
DEV4
ANT A IN
▼
Mixer
DEV 6
ANT B IN
SR4500
ANT A IN
ANT A IN
ANT B IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
▼
Mixer
ANT B IN
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DEV5
▼
Mixer
ANT B IN
SR4500
SR4500
CASCADE A
▼
Mixer
DEV 7
ANT A IN
DC IN (12V/0.5A)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
9 PS4000W
CASCADE B
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT A IN
8xMKPS
ANT A IN
DEV 8
ANT B IN
8xMKPS
ANT B IN
SR4500
▼
Mixer
SR4500
DC IN (12V/0.5A)
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT B IN
ANT B IN
8 PS4000W
CASCADE B
CASCADE A
8xMKPS
ANT A IN
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
DC IN (12V/0.5A)
ANT A IN
down
7 PS4000W
CASCADE B
CASCADE A
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
DC IN (12V/0.5A)
ANT B IN
DEV6
ANT A IN
ANT A IN
DEV7
ANT B IN
ANT B IN
6 PS4000W
CASCADE B
CASCADE A
▼
Mixer
SR4500
ANT A IN
DC IN (12V/0.5A)
SR4500
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
5 PS4000W
CASCADE B
CASCADE A
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
▼
Mixer
ANT A IN
ANT A IN
DEV8
ANT A IN
SR4500
ANT A IN
2xMKPS
ANT B IN
8xMKPS
ANT B IN
DATA
DC IN (12V/0.5A) LOGIC OUT
XLR
¼“ TS
AUDIO OUT
AUDIO OUT
ANT A IN
ANT A IN
DEV7
8xMKPS
2B
1A
DC IN (12V/0.5A)
4B
4A
8xMKPS
ANT A IN
ANT B IN
4 PS4000W
CASCADE B
CASCADE A
3B
2B
2A
1A
4B
4A
3B
3A
2B
2A
1B
1A
DC IN (12V/0.5A)
ANT A IN
down
3 PS4000W
CASCADE B
CASCADE A
3A
2 PS4000W
CASCADE B
DC IN (12V/0.5A)
ANT B IN
2A
ANT A IN
1B
ANT B IN
1B
ANT A IN
2B
0dB
2A
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
4B
up
-8dB
4A
AC POWER
1xMKA20
(20m Cable)
2B
~90-230V
To PS4000W No.4
To PS4000W No.5
To PS4000W No.6
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
2A
AC POWER
ANT OUT
3B
PSU4000
~90-230V
32 Channel WMS4500 System
with omni-directional antennas &
20(40)m antenna cable (66 or 132 feet)
RA4000 B/W
ANT OUT
3A
To PS4000W No.1
To PS4000W No.2
To PS4000W No.3
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
AC POWER
1B
~90-230V
DHCP Switch
DC IN
HUB4000Q - Network Concentrator (optional)
32 Channel WMS4500 Charging System
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
PSU4000
DC IN (12V/1.4A)
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
CU4000
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
CU4000
AC-CU4000 Power Supply (1.4A)
DC IN (12V/1.4A)
DC IN (12V/1.4A)
CU4000
PSU4000
~90-230V
AC POWER
DC OUT 1 (2.5A)
DC OUT 2 (2A)
DC OUT 3 (2A)
DC IN (12V/1.4A)
CU4000
DC IN (12V/1.4A)
If you don’t want to use PSU4000 for optional components, you can also use
16x AC-CU4000 Power Supply for CU4000's and
8x AC12 Power Supply for the HUB4000Q’s and HPA4000's
PS4000W Technical Information
PS4000W – Power Splitter
Signal level adjustment
Rear View
Attenuation
Antenna A cascade output
Antenna A input
(DC power)
Ant. B
4x Antenna A output
(DC power)
dip switches behind AKG Logo
Date
Designer
Project
65
15.01.2012
Wolfgang Fritz
Revision
Ref.No.
1.0
MCS0802001
32 channel WMS4500 charging system
32 Channel WMS4500 System with omni-directional antennas
units
description
comment
code
32
SR 4500
70
32
HT 4500 or PT4500
48
9
PS4000 W
59
Half-rack receiver without AC-Adapter; (frequency range 500 to 863 MHz); 2 UHF antennas; RMU
4000 rack mounting kit
Hand-held transmitter or Bodypack transmitter; (frequency range 500 to 863 MHz); SA 63 stand
adapter; 2 AA size dry batteries
Do not forget microphone head headset or other microphone !!
Wide band antenna multi coupler (4+1 out) without AC-Adapter
3000Z00..
2
RA4000 B/W
66
External omni-directional active dipoleantenna with amplifier (2 req.)
2632Z0030
80
MK PS
54
Connecting cable for PS to SR 2.15ft (65cm)
6000H0206
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
6000H0205
3
PSU4000
60
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W, Mains Cable
2997Z000…
2
MKA 20
55
66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58
2
BNC I-connector
3001Z00..
3002Z00..
2996Z0008
Additional parts for 40m(132feet) Antenna Cable
6000H0205
EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
Optional Components
units
description
16
CU 4000
1
AC12 1500mA EU/US/UK7
6
PSU4000
1
4
AC12 500mA EU/US/UK 4
1
DHCP Net Switch + CAT5 Cable
HUB4000 Q / none
39
60
50
comment
code
Twin charger + 2 BP 4000 for HT 4000 & PT 4000; with AC Adapter. Please specify one of the
AC- CU4000
12V AC-Adapter (EU-Version) power supply CU4000 (you can also use a PSU4000 output)
Central Power supply unit for powering up to three HUB4000Q, CU4000 or up to 12 receivers via
PS4000W,
MainsforCable
12V AC-Adapter
1 ASU4000, AB4000, HUB4000Q or SR4500.
Network concentrator without AC-Adapter; of 8 systems
2887Z0004
7801H000…
2997Z000…
7801H000…
2955Z0014
EXTERNAL !! Not available at AKG - for 4 input to 1 output (e.g. D-Link)
66
01 / 2012
WMS450/470
Do not forget microphone head, headset or other microphone !!
HT4500: e.g. D5 WL-1, D7 WL-1, C5 WL-1, C535 WL-1
PT4500: e.g. C544L, C555L, C520L, C516ML, C518ML, C519ML, HC577 WR-L, CK77 WR-L, CK99L, C411L, C417L