PDQ 6EW Installation Instruction

6EW Exit Device Trim Installation Instruction
For cylinder installation or door adjustment, see page 2.
1. Hand trim (1). Install lever drive spindle (2).
2
1
2. Install trim (1) and exit device head cover (3).
1
3
Key/Cylinder Parts
a. Cylinder Lock Nut (P/N 88644)
b. Cylinder Lock Plate (P/N 88608)
c. Collar (Refer to Cylinder Length Chart for P/N)
d. Mortise Cylinder
e. Wave Spring (P/N 88657)
d
a
b
e
c
Cylinder Length Chart
Cylinder Length
1-1/8” and 1-1/4"
1-1/2”
2754 Creek Hill Road
Leola, PA 17540-2005
Customer Service: 1-800-441-9692
Part Number
I5503
I5504
Cylinder Installation
1. Remove back plate (4). Install wave spring (e) and cylinder (d) into the collar (c). Install
cylinder and collar assembly. Secure with cylinder locking plate (b) and locknut (a).
d
a
4
c
b
e
2. Align drive pin (5). Install and secure back plate (4).
5
4
Adjust for Door Thickness
Trim is factory preset for a 1 ¾“.
1. Remove screw (6) from drive pin (5).
2. Move pin 2 to 2 ¼“.
3. Reinstall screw.
5
6
P/N 629903 Rev 0