Broan QTXE110150DCSF Humidity Sensing Finish Pack Installation Guide

Broan QTXE110150DCSF is a humidity-sensing fan/light combination designed for bathrooms and other areas where moisture control is important. It features a sophisticated humidity sensor that automatically turns the fan on when humidity levels rise, helping to prevent mold and mildew growth. You can also manually control the fan and light separately, using a 2- or 3-function wall control. The fan comes with a timer that allows you to set how long it remains on after being activated, providing additional control over ventilation.

PDF Download
Document
Broan QTXE110150DCSF Humidity Sensing Finish Pack Installation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Humidity Sensing
  • Automatic Fan Activation
  • Manual Fan and Light Control
  • Timer Function
  • Quiet Operation

Frequently asked questions

The humidity sensor detects changes in humidity levels and automatically turns the fan on when the humidity reaches a preset level. This helps to prevent moisture buildup and mold growth.

Yes, you can manually control the fan and light separately using a 2- or 3-function wall control.

The timer controls how long the fan remains on after being activated. You can adjust the timer by turning off the power at the electrical service panel and rotating the MINUTES control using a small screwdriver.

You can clean the humidity sensor using a dry dustcloth, clean toothbrush, or lightly vacuuming. Do not use abrasive cloths, steel wool pads, or scouring powders. Do not use cleaning sprays, solvents, or water on or near the sensor.
Preparing document for printing…
0%