Samsung | SHC-740N/P | User guide | Samsung SHC-740N/P User guide

SCH-u740 Series
P O R T A B L E
A l l
D i g i t a l
M o b i l e
P h o n e
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
ZI12_PM_U740_11307_F9
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property
of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not
limited to, accessories, parts, or software relating there to (the “Phone System”), is
proprietary to Samsung and protected under federal laws, state laws, and international
treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship. You may not infringe
or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree
that you will not (and will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to create source code from the
software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), L.P.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, L.P. is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
GH68-12047A
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.
Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225;
5, 109, 390.
Printed in Korea
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY
PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS",
AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE
OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF
THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
ZI12_PM_U740_11307_F9
Table of Contents
Section 1: Getting Started ...........................................................................5
Turning Your Phone On and Off .................................................................................5
Setting Up Voicemail .................................................................................................5
Understanding this User Manual ...............................................................................6
Notes and Tips ..........................................................................................................7
Section 2: Understanding Your Phone ........................................................8
Features of Your Phone .............................................................................................8
Open View of Your Phone ..........................................................................................9
Closed View of Your Phone .....................................................................................11
Command Keys ......................................................................................................12
Understanding the Display Screen ..........................................................................14
Battery ....................................................................................................................18
Section 3: Call Functions ...........................................................................23
Making a Call ..........................................................................................................23
Answering a Call .....................................................................................................24
In-Use Menu Options .............................................................................................. 25
Recent Calls ..........................................................................................................25
Roaming .................................................................................................................29
TTY .........................................................................................................................30
VoiceSignal™ .........................................................................................................30
Section 4: Menu Navigation ......................................................................38
Menu Navigation .....................................................................................................38
Navigation Key Shortcuts ........................................................................................39
Menu Outline ..........................................................................................................39
Section 5: Entering Text ............................................................................44
Changing the Text Entry Mode ................................................................................44
Entering Text Using VoiceMode ...............................................................................45
Entering Text Using Word Mode ..............................................................................46
Entering Upper and Lower Case ..............................................................................47
Entering Symbols ....................................................................................................47
Entering Numbers ...................................................................................................48
Section 6: Understanding Your Contacts ..................................................49
Opening Contacts Menu ..........................................................................................49
Contacts Icons ........................................................................................................50
Adding a Contact ....................................................................................................50
Adding Pauses ........................................................................................................53
Contact Groups .......................................................................................................53
Finding a Contacts Entry .........................................................................................56
Editing an Existing Contact Entry .............................................................................56
Deleting a Contact Entry .........................................................................................57
Storing Numbers After a Call ...................................................................................57
Speed Dialing .........................................................................................................57
1
My Name Card ........................................................................................................59
Finding My Phone Number ......................................................................................59
Section 7: Messaging ............................................................................... 60
Types of Messages .................................................................................................60
Retrieving New Messages .......................................................................................61
Creating and Sending Text Messages ......................................................................61
Creating and Sending Picture-Video Messages .......................................................63
Creating and Sending Messages in Landscape Mode ..............................................64
Receiving Picture-Video Messages ..........................................................................64
New Sketch Messages ............................................................................................66
Postcard Message ..................................................................................................66
Message Folders .....................................................................................................68
Changing Message Settings ....................................................................................73
Wireless Sync Email ................................................................................................74
Voicemail ................................................................................................................74
E-Mail ....................................................................................................................74
Mobile IM ...............................................................................................................75
Chat .......................................................................................................................75
Section 8: Changing Your Settings .......................................................... 76
My Account ............................................................................................................76
Tools ......................................................................................................................76
Bluetooth Menu ......................................................................................................77
Sounds Settings ......................................................................................................79
Display Settings ......................................................................................................82
Phone Settings ........................................................................................................85
Call Settings ...........................................................................................................91
Memory ..................................................................................................................94
Phone Info ..............................................................................................................95
Section 9: Multimedia .............................................................................. 96
Get It Now ..............................................................................................................96
Music & Tones .......................................................................................................97
Picture & Video .....................................................................................................104
Games .................................................................................................................111
News & Info .........................................................................................................112
Tools on the Go ....................................................................................................112
Extras ..................................................................................................................113
Section 10: Tools ..................................................................................... 114
Voice Commands ..................................................................................................114
Calculator .............................................................................................................114
Calendar ...............................................................................................................116
Alarm Clock ..........................................................................................................118
World Clock ..........................................................................................................119
Stop Watch ...........................................................................................................120
Notepad ................................................................................................................120
Table of Contents
2
Section 11: Landscape Mode ..................................................................122
Opening Your Phone to a Landscape View ............................................................123
Open View of Your Phone - Landscape Mode ........................................................124
Making a Call - Landscape Mode .........................................................................125
Answering a Call - Landscape Mode ....................................................................126
VoiceSignal Commands - Landscape Mode ...........................................................126
Creating and Sending Messages - Landscape Mode ............................................127
Entering Numbers - Landscape mode ..................................................................128
Wireless Sync Email - Landscape Mode ...............................................................128
E-Mail - Landscape Mode ....................................................................................129
Mobile IM - Landscape Mode ...............................................................................130
Chat - Landscape Mode .......................................................................................130
My Account - Landscape Mode ............................................................................131
Multimedia - Landscape Mode ..............................................................................131
Mobile Web - Landscape Mode .............................................................................131
Section 12: Mobile Web ...........................................................................132
Mobile Web .........................................................................................................132
Launching Mobile Web ........................................................................................132
Exit Mobile Web ...................................................................................................133
Navigate the Web ................................................................................................133
Mobile Web Soft Keys ..........................................................................................133
Links ................................................................................................................... 134
Place a Call While Using Mobile Web ...................................................................134
Section 13: Health and Safety Information .............................................135
Health and Safety Information ...............................................................................135
UL Certified Travel Adaptor ...................................................................................137
Consumer Information on Wireless Phones ...........................................................137
Road Safety ..........................................................................................................143
Operating Environment .........................................................................................144
Using Your Phone Near Other Electronic Devices ...................................................144
Potentially Explosive Environments .......................................................................146
Emergency Calls ...................................................................................................146
FCC Notice and Cautions .......................................................................................147
Other Important Safety Information .......................................................................148
Product Performance ............................................................................................ 148
Availability of Various Features/Ring Tones ...........................................................149
Battery Standby and Talk Time .............................................................................149
Battery Precautions ..............................................................................................149
Samsung Mobile Products and Recycling ..............................................................151
Care and Maintenance ..........................................................................................151
Section 14: Warranty Information ...........................................................152
Standard Limited Warranty ...................................................................................152
Index .........................................................................................................156
The user guide gives navigation instructions according to the default Display Settings>Display
Theme (My Desk) menu. If other themes are set, navigating the phone's menus may be different.
3
Table of Contents
4
Section 1: Getting Started
Topics Covered
• Turning Your Phone On and Off
• Setting Up Voice Mail
• Understanding this User Manual
• Notes and Tips
This section allows you to start using your phone by activating your service, setting
up your voicemail, contacting customer support, or getting an understanding of how
this manual is put together.
Turning Your Phone On and Off
Turning Your Phone On
1. Open the flip, then press
.
Note: As with any other radio-transmitting device, do not touch the internal antenna as it affects call quality
and may cause the phone to operate at a higher power level than is necessary. The internal antenna is
located along the top on the back side of your phone.
2. Once the phone finds a signal, the time, date, and day appear in the
display.
3. You’re now ready to place and receive calls.
Note: If the phone is outside the Verizon Wireless coverage area the roaming icon
of the display.
appears in the top
Turn Your Phone Off
Press
for two or more seconds. Your phone powers off.
Setting Up Voicemail
Voicemail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voicemail account has been set up, you can use the Voicemail selection 6 (under the
Messaging menu) to view details of voice messages in your voicemail box.
5
Voicemail Setup*
1. In idle mode, press and hold the 1 (
) key or dial *86
(
),
from your phone or dial your wireless
phone number from any touch-tone phone.
2. When the recorded announcement begins, press # (
) to interrupt
(if applicable).
3. An easy-to-follow setup tutorial will begin. Follow the instructions to set up
your new password and record a greeting.
Listen to Voicemail
1. In idle mode, press and hold the 1 (
(
),
) key or dial *86
.
2. You are then prompted to enter your password followed by # (
) key.
3. Follow the recorded prompts to listen to messages, change administrative
options, and so on.
*airtime and long distance charges apply. IN Calling minutes do not apply to Voice Mail setup or retrievals.
Understanding this User Manual
The chapters of this manual generally follow the same order as the menus and
sub-menus in your phone. A robust index for quick reference to most features
begins on page 156.
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on
page 135.
The u740 has features and functions that can be performed only in Landscape
mode. The Landscape mode
icon will be used to denote those features and
functions.
Section 1: Getting Started
6
Notes and Tips
Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or submenu.
• Tips: Provide quick or innovative methods for performing functions related to the
subject at hand.
• Important: Points out important information about the current feature that could
affect performance, or even damage your phone.
7
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Closed View of Your Phone
• Command Keys
• Understanding the Display Screen
• Battery
This section outlines key features of your phone. It also displays the screen and the
icons that are displayed when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service (available on
participating networks).
• High speed data (CDMA 2000 1x Technology)
• EVDO 1x Technology
• Global Positioning (GPS) Technology
• Personal Organizer
• Text Messaging
• Picture Messaging
• Video Messaging
• E-mail Messaging
• Mobile IM
• V Cast
• Chat
• 1.3 Megapixel Camera
• Camcorder
• Advanced Speech Recognition
• Speakerphone
• microSD™ Memory Card Slot
• Music Player
Section 2: Understanding Your Phone
8
• QWERTY keyboard
• Bluetooth® Wireless Technology **
**The SCH-u740 supports the following Bluetooth profiles: Headset, Handsfree, Serial Port, Dial Up
Networking and ***OPP (Object Push Profile). The SCH-u740 does not support all Bluetooth OBEX profiles.
Go to www.verizonwireless.com/bluetoothchart to check vehicle/accessory compatibility.
Important: ***OPP (Object Push Profile) is limited to vCard functionality only.
Open View of Your Phone
The following illustration shows the main internal features of your phone:
15. Earpiece-Speaker (Right)
1. Internal LCD
14. Speaker (Left)
2. OK Key
3. Left Soft Key
4. Send Key
5. Camera-Camcorder Key
6. Voice Recognition Key
7. Special Function Keys
Soft key is not functional
in Portrait Mode.
13. Navigation Keys
12. Right Soft Key
11. End Key
10. CLR Key
9. Alpha-numeric Keypad
7. Special Function Keys
8. Microphone
Important: When opening the phone in Portrait Mode or Landscape Mode, it is important that you open the phone
straight up (90 degrees). Opening the phone partially in Landscape Mode and then trying to open the
phone in Portrait Mode may cuase damage to the hinge of the phone.
9
Features
1. Internal LCD: Displays all the information needed to operate your phone.
2. OK Key: Pressing when navigating through a menu accepts the highlighted
choice in a menu.
3. Left Soft Key: This key is used to navigate through menus and applications
by selecting the choice available in the Left Soft key Option.
4. Send Key: Allows you to place or receive a call. In idle mode, press the key
once to access the recent call log.
5. Camera/Camcorder Key: This key allows you to activate the camera.
Press and hold to activate the camcorder.
6. Voice Recognition Key: Press to activate VoiceSignal.
7. Special Function Keys: Enters special characters. Perform various
functions.
8. Microphone: The Microphone allows the other caller to hear you clearly
when you are speaking to them.
9. Alpha-numeric Keypad: Use these keys to enter numbers, letters, and
characters.
10. Clear Key: Deletes characters from the display when you are in text entry
mode. Press to return to the previous menu or screen when navigating
features on your phone.
11. End Key: Ends a call. If you press and hold the END key, the power goes On
or Off. When you receive an incoming call, press to ignore the call and send
the call to voicemail.
12. Right Soft Key: This key is used to navigate through menus and
applications by selecting the choice available in the Right Soft key Option.
13. Navigation Keys: These keys allow you to scroll through the phone menu
options.
14. Speaker (Left): Music, Ringtones, and Sounds are played through the
speaker. This speaker provides stereo sound for multimedia files by acting
as a left stereo speaker.
15. Earpiece-Speaker (Right): The earpiece allows you to hear the other
caller while in Portrait mode. When the phone is in a landscape orientation,
this speaker provides stereo sound for multimedia files by acting as a right
stereo speaker.
Section 2: Understanding Your Phone
10
Closed View of Your Phone
The following illustration shows the main external features of your phone:
1. Hold Key
11. Camera Lens
10. Flash
2. Power/Accessory
Connector
9. microSD™
Card Slot
8. Speakerphone
Key
3. Volume Keys
4. External LCD
5. Rewind Key
7. Fast Forward
Key
6. Play/Pause Key
Features
1. Hold Key: Allows you to lock/unlock the music keys (i.e.
Play/Pause, and
Rewind,
Fast Forward) on the front of the phone
2. Power/Accessory Connector: The power/accessory interface connector is
used to plug in the charging accessories and also connect any available
accessory cables to your phone. This connector also allows you to plug in
an optional headset for safe, convenient conversations.
3. Volume Keys: Allows you to adjust the master volume in idle mode (with
the flip open) or adjust the voice volume during a call. To mute the ringer
during an incoming call, press the volume key up or down. When the flip is
closed, press and hold the key, and sub LCD displays.
4. External LCD: External LCD shows signal and battery strength, time, day,
and date. It also displays incoming calls or messages.
5. Rewind Key: Music rewind key.
6. Play/Pause Key: Music play or pause key.
7. Fast Forward Key: Music fast forward key.
8. Speakerphone Key: Press this key to enable/disable the speakerphone
option.
11
9. microSD™ Card Slot: This expansion slot allows you to insert a
microSD™ memory card to add additional memory and storage capacity.
10. Flash: The built-in flash has manual and automatic capabilities.
11. Camera Lens: Allows you to take photos or shoot video.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
and the right soft key
.
There are two soft keys, the left soft key
Left Soft Key
Some functions of the left soft key are as follows.
• In idle mode, press the Message (left) soft key
menu.
to open the Message
• When the left soft key function is Settings, press the Settings (left) soft key
to view settings for the feature.
• When the left soft key function is Edit, press the Edit (left) soft key
a Contact or Profile setting.
to edit
Right Soft Key
Some functions of the right soft key are as follows.
• In idle mode, press the Contacts (right) soft key
list.
to open your Contacts
• When the right soft key function is Options, press the Options (right) soft key
to view more options for the current menu.
Clear Key
The CLR key
is used to erase or clear numbers, text, or symbols from the
display. You can also use
to return to a previous menu or to return to idle
mode from any menu.
• If you enter an incorrect character, briefly press
delete) the character.
to backspace (and
• To erase the previous word in a sentence, press and hold
• To back up one menu level, briefly press
.
.
• To return to idle mode from any menu, press and hold
.
Section 2: Understanding Your Phone
12
End Key
• Press and hold the End key
• Briefly press
• Press
to turn your phone on or off.
once to disconnect a call.
to return to idle mode from any menu, or to cancel the last input.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
• Press
phone.
to make a call.
in idle mode to display a list of recent calls to and from your
• Press
twice in idle mode to call the most recently dialed, received, or
missed number.
• Press
to pick up a waiting call. Press
the other call.
again to switch back to
Navigation Key
Use the directional keys on the navigation key to browse menus, sub-menus, and
lists. Each key also acts as a shortcut to launch applications. The navigation key can
be customized to launch your favorite application. See "Set Shortcut Key" on page
86 for more information.
Hold Key
Press the Hold key (
Play/Pause, and
) to lock/unlock the touch pad (i.e.
Rewind,
Fast Forward) on the front of the u740.
Note: The music touch keys are only functional when the backlight is on.
Speakerphone Key
Press the Speakerphone key (
) to switch from using the earpiece to the
speakerphone before or during a call. Use the volume keys (located on the left side
of your phone) adjust the volume. Press the speakerphone key to enable and disable
the speakerphone option.
13
The following functions are only applicable in
Landscape mode.
For more information on Landscape mode, refer to "Section 11: Landscape Mode"
on page 122.
NumLock Key
Press
in landscape mode to lock/unlock text entry 123.
Shift Key
Press
in landscape mode to cycle between upper case (ABC), lower case
(abc), or initial caps (Abc) for characters in ABC mode
Fn Key
Press
in landscape mode to dial vanity numbers. For example to dial
1-800-SAMSUNG, enter the number 1-800 using the gray numeric keys. Then press
.
, and use the QWERTY keyboard to enter SAMSUNG and press
Enter Key
Press
in landscape mode to move the insertion point to the next line in a
message. When in the main menu screen, press to access menus and sub-menu
items.
Spacebar Key
Press the Spacebar (
characters.
) in landscape mode to insert spaces between words or
Understanding the Display Screen
The top line of your phone’s display contain icons that
indicate network status, battery power, signal strength,
connection type and more.
The light blue line of the idle screen shows icons that
indicate feature and function status. The following list
contains icons that may appear in your display.
Section 2: Understanding Your Phone
14
Display icons
Signal Strength: Always appears when your phone is on and indicates
the current signal strength. More bars indicate a stronger signal.
Standalone Mode: Appears when Standalone Mode is on. When on, all
RF functions for your phone are disabled, and you cannot use your
phone to place or receive calls.
Roaming Indicator: Your phone is outside your home area. While
roaming, another wireless provider may be handling your call. The
service rate for the call may be higher than those made from within your
home area. Please refer to Verizon Wireless for roaming rates.
Digital: Appears when your phone is receiving digital data.
1X Protocol: Indicates your phone is using the CDMA 1X protocol.
EVDO: Appears when your phone is using the EVDO protocol.
EVDO/1X: The EVDO/1X protocol is capable of high-speed broadband
data (3G).
EVDO/2G: Indicates your phone is using the EVDO 2G protocol.
SSL: Indicates the secure socket layer is active transmits your
communications over the internet in an encrypted format.
Voice Privacy: Prevents eavesdropping over a CDMA traffic channel.
No service indicator: Your phone cannot find a signal because you’re
outside a service area. You cannot make or receive calls. Wait for a
signal or move to an open area to find a signal. This indicator always
appears when you first turn on your phone and disappears once service
is located.
Dormant: Indicates no incoming or outgoing data.
Voice Call: Indicates a call in progress. When dialing a number, this icon
flashes until the call connects.
15
Data Call: Indicates a call in progress. When dialing a number, this icon
flashes until the call connects.
E911: Global Positioning Service (GPS) for 911 is set to On for
emergency calls only.
Location On: Global Positioning Service is set to On for location and 911
calls.
Bluetooth: Indicates that Bluetooth wireless technology is active.
Bluetooth Active: Indicates that Bluetooth wireless technology is
connected and receiving or pushing data.
Bluetooth Connected: Indicates Bluetooth wireless technology is active
and connected.
Dial ABC Lock: Indicates that letter entry is active in the dialing screen.
Pressing the Fn key while dialing toggles this lock. (eg. Allows dialing
the lettters "SAMSUNG" in "1-555-SAMSUNG".
Number Lock: Indicates NumLock is active. The NumLock Key changes
Text Entry Mode from Abc to 123. The NumLock icon only displays
when using the Verizon Wireless Mobile Web.
Hold - Keys Lock: Indicates that music player keys are locked and are
not functional. Press again to unlock the music player keys.
Battery Level: More bars indicate a greater charge. When the battery is
low, an empty battery icon flashes and the phone sounds an alert, which
indicates your phone is about to shut down.
TTY: Indicates that TTY is enabled.
All Sounds Off: The ringer is silenced for all alerts, incoming calls, and
incoming messages.
Alarm Only: Your phone will only ring when the set alarm sounds.
Vibrate Only: Your phone vibrates upon receiving a call.
Speakerphone: Your phone switches to speakerphone instead of
earpiece.
Section 2: Understanding Your Phone
16
Missed Calls: Your phone displays this icon when calls are missed.
Message: You’ve received a new text, page or web alert message.
You’re also notified of a new message by animations and sound.
Calendar Appointment: Your phone displays this icon when you have a
calendar appointment scheduled.
Voicemail: You’ve received a voicemail message, page or web alert
message. You have one or more unread voicemail messages in your
voicemail box. (Only applicable on the Verizon Wireless Network.)
Alarm On: Indicates that your phone has a set alarm.
Auto Answer: Automatic answer is enabled. Your phone automatically
picks up calls after the designated time with the stereo headset or when
your bluetooth headset or bluetooth hands-free car kit is connected.
17
Dialogue boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “SAVE MESSAGE DRAFT?”
• Reconfirm
• Example: “ERASE ALL MESSAGES?”
• Performing
• Example: “SENDING...” “CONNECTING..”
• Completed
• Example: “MESSAGE SENT!”
• Information
• Example: “NEW MESSAGE”
• Error
• Example: “SYSTEM ERROR!”
• Warning
• Example: “BATTERY LOW,” “MEMORY FULL!”
Battery
Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
charger.
Important: Although the phone can be used while the battery is charging, the battery must be fully charged
before first use, otherwise you could damage the battery.
Section 2: Understanding Your Phone
18
Using A Non-Supported Battery
Samsung handsets do not support the use of a
non-supported battery.
When using a non-supported battery you will hear a
series of beeps and you will see a warning message
that indicates “NON SUPPORTED BATTERY SEE USER
GUIDE” If you receive this warning, battery charging
has been disabled.
Samsung charging accessories (i.e. travel adapter, and
cigarette lighter adapter) will only charge a Samsung
approved battery.
To continue use of your handset press
.
Note: When using a non-supported battery the handset can only be used for the duration of the life of the
battery and cannot be recharged.
Important: Using a non-supported battery may cause damage to your phone. Use a Samsung supported
battery only.
Install the Battery
1. Slide the battery cover down and lift up to remove it.
19
2. Insert the top end of the battery into the phone housing by using the
direction of the arrow printed on the battery. The gold contacts on the top of
the battery should match up with those on the phone.
3. Push the bottom end of the battery down until it snaps into place.
4. Slide the battery cover up until it snaps into place.
Remove the Battery
1. Slide the battery cover down and lift up to remove it.
Section 2: Understanding Your Phone
20
2. Use your finger to lift the battery (bottom end first) up and away from the
phone.
Charge the Battery
Your phone is powered by a rechargeable standard Li-ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.
21
Travel Charger
The travel charger is a convenient, light-weight charger that rapidly charges your
phone from any 120/ 220 VAC outlet.
1. Plug the large end of the travel charger into a standard 120/220 VAC wall
outlet.
2. Insert the smaller end of the travel charger into the charger/ accessory
connector on the left side of the phone.
Note: You can use your phone while charging, however, the battery charges faster if the phone is turned
off.
Battery Indicator
The battery indicator
in the upper-right corner of the display indicates battery
power level. Four bars indicate a full charge, while an empty icon
indicates an
almost empty battery. Two to three minutes before the battery becomes too low to
operate, a blinking empty battery icon
appears and a tone sounds. If you
continue to operate the phone without charging, it shuts down.
Section 2: Understanding Your Phone
22
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• In-Use Menu Options
• Recent Calls
• Roaming
• TTY
• VoiceSignal®
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
1. At the idle screen, enter the number you want to call using the gray
numeric keypad.
2. Press
.
In Landscape mode
Note: In landscape mode, you can only make calls using the speakerphone.
• For more detailed procedures, refer to "Making a Call - Landscape Mode" on
page 125.
Making Calls Using Contacts
Contacts are entries that you create to store names, numbers, and other information
for people or groups of interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily. See "Adding a Contact" on
page 50 for information on creating contacts.
1. At the idle screen, press the right soft key
Contacts.
2. Press the navigation up and down keys until the contact that you want to
call is highlighted.
23
Tip: To quickly locate a name, press (or multi-press) any key on the keypad that corresponds to the first,
second, and/or third letters of the contact’s name.
3. When the desired contact is highlighted, press
VIEW. Details for the
contact appear in the display.
4. If the entry contains more than one number, use the up or down navigation
key to highlight the desired number.
5. Press
to call the number.
In Landscape mode
Note: In landscape mode, you can only make calls using the speakerphone.
• For more detailed procedures, refer to "Making Calls Using Contacts - In
Landscape Mode" on page 125.
Answering a Call
When you receive an incoming call, press the
key to answer the call or right
soft key
Ignore to send the call to voicemail, or left soft key
Quiet to
silence the ringer.
In Landscape mode
Note: To change the answer options, see "Answer Options" on page 92.
• For more detailed procedures, refer to "Answering a Call - Landscape Mode"
on page 126.
Answering Call-Waiting Calls
• When you receive a new call while on a call, press
call or let the new call go to your voicemail.
• If you press
to answer the new
and answer the incoming call, the original caller is placed
on hold. To return to your original call press
.
Section 3: Call Functions
24
In-Use Menu Options
Access numerous menus and features even while in a call.
Note: If the call is disconnected while accessing the In-Use Option, the In-Use Option disappears from the
display and the phone eventually returns to idle mode.
1. While in a call, press the right soft key
Options. The following menu
items appear in the display.
• Messaging: Open the Messages menu.
• Contact List: Open the contacts to view.
• Recent Calls: Displays your recent incoming, missed and outgoing calls.
• Bluetooth Menu: Displays the Bluetooth menu.
• Main Menu: Displays the Main menu.
• Notepad: Displays the Notepad menu.
• Voice Record: Record a voice memo.
2. Use the navigation key to highlight a menu. Press
to open the
highlighted menu or to activate the feature.
Recent Calls
When you place, miss, or receive a call, a record of the call is saved in Recent Calls,
which is a listing of the different types of calls you can either receive or make. These
types of calls are listed below.
• Missed: Displays any missed calls.
• Received: Displays any received calls that were answered.
• Dialed: Displays all outgoing calls made from your phone.
• All: Displays all missed, received, and outgoing calls made from your phone.
25
Viewing Call Information
Recent Calls retains information such as the duration, date and time, and whether
the call was received, dialed, or missed.
1. At the idle screen, press the
key.
Or press
MENU then press the right navigation key to highlight
Recent Calls and press
. Use the navigation key to select a category
and press
. Continue to step 3.
2. Press the left or right navigation key to highlight the call log that contains
the number you want to view and press
.
3. Press the down navigation key to highlight the desired number.
4. Once the desired number is highlighted, press
OPEN.
5. The following information appears in the display:
• Call Type: The title bar displays if the call is a missed, dialed, or received.
• Name: If the caller is in your Contacts list, their name is listed here. This option
only appears if the caller is in your Contacts list.
• Number: Displays the telephone number as well as the appropriate icon to
indicate mobile, work, or home number.
• Time: The time of the call.
• Date: The date of the call.
• Duration: The duration of the calls made or receive.
6. Press the right soft key
Options to display the following options:
• Save: Save the number to your Contacts list.
• Details: Displays details about the caller if entered in Contacts.
• Erase: Delete the call from Call History.
• Lock/Unlock: locks or unlocks the entry to prevent accidental deletion.
• Erase All: Delete all calls from Call History.
• View Timers: Select to view the call timers for your phone.
7. Press the down navigation key to highlight an option. Press
to enter
the highlighted option’s sub-menu.
Section 3: Call Functions
26
Call History Icons
When you view Recent Calls, an icon to the left of the number indicates the type of
call.
Indicates a Missed call
Indicates a Dialed call
Indicates a Received call
Making Calls Using Call History
1. At the idle screen, press
then press up or down navigation key until
the desired number is highlighted.
2. Press
then press
to call the highlighted number. Or, you can press
to call the highlighted number.
OPEN,
Creating or Updating Contacts Using Call History
1. At the idle screen, press
then press up or down navigation key until
the desired number is highlighted.
2. Press the right soft key
Options. Save is highlighted. Press
.
3. Use the up or down navigation keys to highlight Create New Contact or
Update Existing. Press
.
4. If you selected Create New Contact, the following types are available.
•
Mobile 1
•
Mobile 2
•
Home
•
Work
•
Fax
5. If you selected Update Existing, proceed to step 11.
6. Use the up/down navigation keys to highlight the desired entry type
(mobile, home, work, etc.) then press
.
7. Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.
27
8. To assign a Speed Dial location, use the up/down navigation key to
highlight the number you would like to assign to a Speed Dial location and
Options. Highlight Set Speed Dial and
press the right soft key
press
.
Highlight an unassigned location and press
SET. A confirmation
message appears in the display, Yes is highlighted, press
to add
Contact to the speed dial location.
Note: Voicemail is assigned to Speed Dial location 1.
Note: You can assign a speed dial location to each number associated with the contact (Home, Work,
Mobile 1, Mobile 2, and Fax.).
9. When you’re finished entering information for the entry, press
SAVE.
The entry is saved to your Contacts.
10. If you selected Update Existing, the Contact List opens in Search mode.
Use the navigation key to browse through entries, or enter the name of the
entry using the keypad. Once you’ve highlighted the entry you wish to add
the number, press
.
11. An UPDATE EXISTING pop-up screen with a selection list of entry types
displays. Use the up or down navigation keys to highlight the desired type
then press
. The number is added to the selected entry and saved to
your Contacts.
Delete Call History Entries
1. At the idle screen, press
then press up or down navigation key until
the desired number is highlighted.
2. Press the right soft key
Options. A pop-up menu appears in the
display.
3. Press the down navigation key to highlight Erase and press
. Select
Yes or No at the ERASE ENTRY? pop-up screen.
4. Press
.
Section 3: Call Functions
28
Delete All Call History Entries
1. At the idle screen, press
2. Press the right soft key
.
Options. A pop-up menu appears in the
display.
3. Press the down navigation key to highlight Erase All and press
. Select
Yes or No at the ERASE ALL ENTRIES? pop-up screen.
4. Press
.
Roaming
What is Roaming?
Your phone can roam on other digital networks. Roaming occurs when you travel
outside a pre-designated coverage area. The roaming icon displays when roaming is
active and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming.
Roaming Options
The following roaming options are available:
• Home Only - Your phone is available for normal operation only in the designated
coverage area.
• Automatic: The preferred roaming list is used to acquire service.
Note: Contact your service provider for information regarding preferred systems.
To change your Roaming option, follow these steps:
1. Press
MENU. Use the right navigation key to highlight
Tools and press
.
2. Press 6 (
) Phone Settings.
3. Press 7 (
) System Select.
Settings &
4. Use the up or down navigation keys to choose the setting you want, and
press
29
.
TTY
Your phone is fully TTY compatible. Connect the TTY equipment to the headset jack,
which is located on the left side of the phone. Before you can use your phone with a
TTY device, you’ll need to enable TTY functions in the phone.
1. Press
MENU. Use the right navigation key to highlight
Tools and press
.
2. Press 7 (
) Call Settings.
3. Press 3 (
) TTY Mode. The TTY Mode screen displays.
Settings &
4. A warning appears in the display stating “ENABLING TTY WILL DISABLE
HEADSET AUDIO. CONTINUE?”
Use the up or down navigation key to highlight Yes and press
proceed to TTY MODE screen.
to
Use the up or down navigaton key to highlight No and press
to Call Settings menu.
to return
5. Use the up or down navigation keys to select one of the following:
• TTY Full
• TTY + Talk (VCO)
• TTY + Hear (HCO)
• TTY Off
6. Press
to make your selection. The TTY MODE SET screen displays.
VoiceSignal™
VoiceSignal is advanced speech recognition software that can be used to activate a
wide variety of functions on your phone. VoiceSignal software automatically voice
activates all contacts for voice dialing and searching, no pre-recording or training
needed. Speak phone numbers naturally to dial, and use voice commands to launch
applications and navigate phone menus.
VoiceSignal Settings
You can adjust the settings and preferences for VoiceSignal by opening Voice
Commands menu. Using this menu, you can change the following Voice Command
features:
• Tips for adapting Digit Dial
• Digit Dial Adaptation
• Reset Digit Dial Adaptation
• Call Digit Dialing
• Call Name Dialing
Section 3: Call Functions
30
• Send Text Message.
• Send Video Message.
• Send Picture
• Name Lookup
• Opening Apps
• Checking Phone Status
To access the VoiceSignal Settings menu, follow these steps:
1. At the idle screen, press
highlight
2. Press 2 (
2(
MENU. Use the right navigation key to
Settings & Tools and press
.
) Tools, then 1 (
) Voice Settings.
) Voice Commands, and
3. Use the navigation keys to select the setting you want to change. The
following options are available:
• Choice Lists: If VoiceSignal is not absolutely confident that it has correctly
•
•
31
identified a name or number, it can display a choice list of up to three
possibilities, and prompt you to confirm the correct one. You can control when
choice lists appear by changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not confident it has
identified the correct choice from among multiple alternatives.
• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.
• Always Off: VoiceSignal never displays a choice list. Instead, the application picks
the best from among the possible choices.
Sensitivity: In VoiceSignal, sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize names, numbers,
or commands, and rejecting too little, which means it frequently recognizes
something even if nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match found.” If you
frequently experience these messages, you might be able to get better
recognition by adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a wrong match), you
might be able to get better performance by adjusting the Sensitivity setting
toward Reject More.
Digit Dialing: Use the Digit Dialing menu to adapt digit dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone
numbers. Adaptation takes about 180 seconds.
• Reset Digits: Erases any digit adaptation you have done and resets digit
recognition to the factory default. If you have not adapted digits, this option is
grayed out.
• Sound: You can customize the VoiceSignal user interface by turning playback on
•
•
or off for prompts, names, and numbers. You can also change the speed and
volume of name playback.
• Prompts: Turns playback on or off for prompts such as
“Say a command.”
• Digits: Turns playback on or off for digits, for example, when confirming a phone
number.
• Names: Turns playback on or off for names.
• Name Settings: Adjusts the speed and volume of name playback.
VoiceMode: Lets you adapt words, which can improve voice recognition in the
Picture messaging and Video messaging clients. See "Entering Text Using
VoiceMode" on page 45, for detailed information.
• Adapt VoiceMode: Lets you Adapt VoiceMode to your voice, which improves voice
recognition of VoiceMode. You must use the adapt VoiceMode feature in a quiet
room for best results.
• Reset VoiceMode: Resets Voicemode to default setting.
• Tutorial: Displays the VoiceMode tutorial.
About: Displays information about VoiceSignal including version number, build
number, and device number.
You can also access the VoiceSignal Settings menu by following these steps:
1. In idle mode, press the
key.
2. Press the right soft key
Settings.
3. Use the navigation keys to select the setting you want to change.
Adapting VoiceSignal
Voice dialing works well for most people without special adaptation. However,
people with strong accents or unique voice characteristics may receive better results
after adapting the system to match their voices.
You should adapt Digit Dial only if the system is frequently unable to recognize your
speech. After you adapt Digit Dial, your phone is customized to your voice, and your
voice only. Others will not be able to use it unless they reset the phone to factory
defaults.
Adaptation involves recording several digit sequences to adapt the system to the
unique properties of your voice. The adaptation process takes about three minutes.
Tips for adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
Section 3: Call Functions
32
• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
• Only adapt digits if you regularly have problems with digit dialing. Once
adapted, digit dialing will not work as well for other people using your phone.
• Adapt Digit Dial to your voice.
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. At the idle screen, press
highlight
MENU. Use the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, then 1 (
3. Press 2 (
) Voice Settings, then 3 (
4. Adapt Digits is highlighted. Press
) Voice Commands.
) Digit Dialing.
.
5. A short description of the Adapt Digits displays.
6. Read the description until you are comfortable to proceed, then press
.
7. Your phone displays the first digit sequence and “Please say” plays through
the speaker followed by the four digits appearing in the display.
Wait for the beep and repeat the digits using your normal tone of voice.
8. After a moment, the phone plays back the recording and prompts “Did the
recording sound ok?” If the recording was good, say “Yes.” If you need to
re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then re-record. Repeat this step until you’re satisfied with
the recording.
9. After confirming that the recording sounds ok, repeat the recording process
with the next set of digits. After ten sets of digits, the phone indicates that
adaptation is complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to its original state.
1. At the idle screen, press
highlight
MENU. Use the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, then 1 (
3. Press 2 (
) Voice Settings, then 3 (
4. Highlight 2 (
) Voice Commands.
) Digit Dialing.
) Reset Digits and press
. The Reset Digit
Adaptation screen displays requesting confirmation of reset.
33
Note: If you have not performed the Adapt Digits function, the Reset Digits option will not be accessible.
5. Press
to proceed. Digit Adaptation Reset is completed.
VoiceSignal Commands
The following is a list of functions that you can perform using VoiceSignal speech
recognition on your phone.
• Call <Name or #>: Dial by saying a Name in your Contacts List or a Name and
a Location (home, work, mobile).
• Send <Message Type>: Send a picture, text, or video, message to a number
or to someone in your Contacts List.
• Lookup <Name>: Open the contact record for any name in your Contacts List.
• Go to <Menu>: Open any application installed on your device.
• Check <Item>: Provides details of your phone status, voicemail, missed calls,
time, battery level, signal strength and master volume level.
• My Account: Provide helpful information on how to use VoiceSignal. See "My
Account - Landscape Mode" on page 126.
• Help Guide: Provides a helpful tutorial on how to use VoiceSignal.
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply speaking the digits into the
phone. No training is necessary, and Digit Dial is programmed to understand natural
speech.
1. In idle mode, press the
key.
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Say a command” plays through the earpiece or
speakerphone--if it is enabled.
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.
4. “Say the name or number” plays through the earpiece.
5. To use Digit Dialing, say the area code and number that you want to dial
into the microphone, clearly and naturally.
6. The number that you said is repeated through the earpiece and your phone
dials the number.
7. If VoiceSignal is not sure of the number that you said, a list of possible
matches appears in the display.
8. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
Section 3: Call Functions
34
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your Contacts list.
See page 50 for information on creating a Contacts list.
1. In idle mode, press the
key.
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Say a command” plays through the earpiece.
3. Say “Call” at a distance of 3-12 inches from the phone in a natural voice.
4. “Say the name or number” plays through the earpiece or speakerphone--if
it is enabled.
5. To use Name Dialing, say the name of the contact that you want to dial.
6. The name that you said is repeated through the earpiece and your phone
dials the number.
7. If VoiceSignal is not sure of the number that you said, a list of possible
matches appears in the display.
8. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
9. The location is repeated through the earpiece and your phone dials the
number.
Send Text MSG
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
3. Say “Send Text” at a distance of 3-12 inches from the microphone.
“Say the name or number” plays through the earpiece or speakerphone.
4. Say the name exactly as it is displayed in your Contacts list, first name
followed by last name.
5. The contact name appears in the To: field. See "Creating and Sending Text
Messages" on page 61 for more information.
Send Picture
Send Picture allows you to access Picture message, you can use entries stored in
My Pictures or you can take a picture of an image using the camera.
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
35
3. Say “Send Picture ” at a distance of 3-12 inches from the microphone.
“Say the name or number” plays through the earpiece or speakerphone.
4. Say the name exactly as it is displayed in your Contacts list, first name
followed by last name.
5. The contact name appears in the To: field. See "Creating and Sending
Picture-Video Messages" on page 63 for more information.
Name Lookup
To perform a name lookup, you’ll need to have some entries in your Contacts list.
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
3. Say “Lookup” at a distance of 3-12 inches from the microphone. “Say the
name or number” plays through the earpiece or speakerphone.
4. Say the name exactly as it is displayed in your Contacts list, first name
followed by last name.
5. The contact name appears in the display with other information that you’ve
entered for that contact.
Opening Applications
To open any application on your phone using VoiceSignal perform the following.
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
3. Say “Go To” at a distance of 3-12 inches from the microphone. A list of
options displays and a prompt of “Please choose” plays through the
earpiece or speakerphone.
4. The menu option spoken opens.
Checking Phone Status
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Say a
command” plays through the earpiece or speakerphone--if it is enabled.
3. Say “Check” at a distance of 3-12 inches from the microphone. “Please
choose” plays through the earpiece or speakerphone. Valid “Check”
commands are:
• "Check Status" — Displays and announces all of the available status indicators in
sequence through the earpiece or speakerphone—if it is enabled.
Section 3: Call Functions
36
• "Check Voicemail" — Displays the number of new voicemail messages.
• "Check Messages" — Displays and announces the number of new voicemail,
TXT, and Picture messages through the earpiece or speakerphone—if it is
enabled.
• "Check Missed Calls" — Displays the missed call log.
• "Check Time" — Displays and announces the current time through the earpiece
or speakerphone—if it is enabled.
• "Check Battery" — Displays and announces the current battery level through the
earpiece or speakerphone—if it is enabled.
• "Check Signal Strength" — Displays and announces the current EVDO and 1x
signal strength levels through the earpiece or speakerphone—if it is enabled.
• "Check Volume" — Displays and announces the current master volume setting
through the earpiece or speakerphone—if it is enabled.
4. The option spoken opens.
My Account
Using VoiceSignal, you can check your Verizon Wireless account status by voice
command.
Note: This features launches the browser to your account page and requires a data plan and is subject to
Verizon Wireless data coverage.
• For more detailed procedures, refer to "My Account - Landscape Mode" on
page 126.
Help Guide
Provides helpful information on how to use VoiceSignal.
1. In idle mode, press the
key.
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through them earpiece or speakerphone—if it is
enabled.
3. Say, "Help Guide" at a distance of 3-12 inches from the phone in a natural
voice.
4. The tutorial appears in the displays.
37
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Navigation Key Shortcuts
• Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Access menus using the navigation keys, two soft keys
shortcut.
1. In idle mode press
, or use a
MENU. The first of several menus appear in the
display.
2. Use the navigation keys to browse phone menus.
3. Press
to enter the menu or sub-menu presently appearing in the
display.
Return to the Previous Menu
Press
to return to the previous menu.
Navigate Using Shortcuts
You can also access menus and sub-menus using menu numbers. This method is
often called a “shortcut.” To shortcut to a menu or sub-menu, press
MENU,
then enter the menu and/or sub-menu number(s) for the feature in question. Use
"Navigation Key Shortcuts" on page 39, for looking up the menu shortcut number.
1. In idle mode, press
MENU. The
CONTACTS menu is launched.
2. Press the number of the menu. Example, press 3 (
2(
) Groups,
) Business.
Section 4: Menu Navigation
38
Navigation Key Shortcuts
In idle mode, press a navigation key (as illustrated below) to launch its
corresponding application.
The Navigation key can be customized to select other functions. See "Set Shortcut Key" on page 86 for
detailed information on how to customized your Navigation key.
Note: Mobile Web and Get Now applications can only be accessed in Landscape mode.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings, 2 (
shortcut key list displays.
) Set Shortcut Key. The
3. Use the navigation key to change the setting and press
to save your
selection.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
GET IT NOW
1: Music & Tones
1: V CAST Music
2: Get New Ringtones
1: Get New App.
3: My Ringtones
1: Get New Ringtones
1: Get New App.
39
4: My Music
5: My Sounds
1: Record New
6: Sync Music
2: Picture & Video
1: V CAST Videos
2: Get New Pictures
1: Get New App.
3: My Pictures
4: My Videos
5: PIX Place
6: Take Pictures
7: Record Videos
3: Games
1: Get New App.
4: News & Info
5: Tools on the Go
1: Get New App.
6: Extras
1: Get New App.
MESSAGING
1: New Message
1: TXT Message
2: Picture Message
3: Video Message
4: Sketch Message
5: Postcard Message
6: Email Message
2: Inbox
3: Sent
4: Drafts
5: Wireless Sync Email
6: Voicemail
7: E-mail
8: Mobile IM
9: Chat
CONTACTS
1: New Contact
Section 4: Menu Navigation
40
2: Contact List
3: Groups
1: No Group
2: Business
3: Colleague
4: Family
5: Friends
4: Speed Dials
5: My Name Card
RECENT CALLS
1: Missed
2: Received
3: Dialed
4: All
5: View Timers
SETTINGS & TOOLS
1: My Account
2: Tools
1: Voice Commands
1: Voice Dial
2: Voice Settings
3: Menu Readout
2: Calculator
1: Normal
2: Tip
3: Converter
3: Calendar
4: Alarm Clock
5: World Clock
6: Stop Watch
7: Notepad
3: Bluetooth Menu
1: Add New Device
4: Sounds Settings
1: Master Volume
2: Call Sounds
1: Call Ringtone
1: Get New Ringtones
41
2: Call Vibrate
3: Alert Sounds
1: TXT Message
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
2: Picture-Video Message
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
3: Voicemail
1: Tone
1: Get New Ringtones
2: Vibrate
3: Reminder
4: Device Connect
4: Dial Sounds
5: Keypad Volume
6: Earpiece Volume
7: Service Alerts
1: ERI
2: Minute Beep
3: Call Connect
8: Power On/Off
1: Power On
2: Power Off
5: Display Settings
1: Banner
1: Personal
2: ERI Banner
2: Backlight
1: Display
1: Duration
2: Brightness
2: Keypad
3: Contrast
4: Wallpaper
Section 4: Menu Navigation
42
1: Main Screen
2: Front Screen
5: Display Themes
6: Dial Fonts
7: Clock Format
6: Phone Settings
1: Standalone Mode
2: Set Shortcut Key
3: Flip Duration
4: Language
5: Location
6: Security
7: System Select
8: NAM Selection
9: Quick Search
7: Call Settings
1: Answer Options
2: Auto Retry
3: TTY Mode
4: One Touch Dial
5: Voice Privacy
6: Call Restrictions
1: Outgoing
2: Incoming
3: Contacts
7: Data Settings
8: DTMF Tones
8: Memory
1: Save Options
2: Phone Memory
3: Card Memory
9: Phone Info
1: My Number
2: SW Version
3: Icon Glossary
43
Section 5: Entering Text
Topics Covered
• Changing the Text Entry Mode
• Entering Text Using VoiceMode
• Entering Text Using Word Mode
• Entering Upper and Lower Case
• Entering Symbols
• Entering Numbers
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Entry Mode
1. While composing a message in the Text area, press the right soft key
Options to display the following options:
• Save As Draft: Save the message to your Draft folder.
• Add Graphic: Lists preloaded and downloaded graphics to add to the message.
• Add Animation: Lists preloaded and downloaded animations to add to the
message.
• Add Sound: Lists preloaded and downloaded sounds to add to the message.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
• Add Name Card: Select from My Name Card or Contacts to add to the message.
• Edit Text Format: Change font size, text alignment, style, background and color.
• Priority Level: Save the message with a High or Normal priority.
• Callback #: Provides the option to send a callback number with the message.
• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.
• Cancel Message: Cancels the message and returns you to the New Message
menu
Section 5: Entering Text
44
2. While composing a message, press left soft key
Abc to display a
pop-up menu with the following Text Entry Mode options:
• VoiceMode
• Word*
• Abc
• ABC
• 123
• Symbols
Note: *Word is only available in Portrait mode.
Entering Text Using VoiceMode
VoiceMode dictation software allows you to convert your speech to text when
sending a Text or Picture-Video message. Combining VoiceMode with the Send Text,
Send Picture and Send Video voice commands, you can address, compose, and send
a text message using just your voice and a few keys.
Entering Text
1. In idle mode, press the left soft key
1(
2. Press 1 (
3(
Message, then press
) New Message.
) TXT Message, 2 (
) Video Message.
) Picture Message, or
3. Enter the phone number or email address of the recipient, then press the
down navigation key to move to the Text field.
4. Press the left soft key
Abc to display a pop-up menu containing text
entry mode options.
5. Abc is highlighted by default. Use the up/down navigation keys to highlight
VoiceMode, then press
Abc to Voice.
. The text entry mode indicator changes from
6. Press and hold
. A pop up “YOU NEED TO ADAPT VOICEMODE. ADAPT
NOW?” screen displays.
7. Yes is highlighted, press
twice to Adapt VoiceMode. This will take
about 3 minutes to complete.
8. After Adapting VoiceMode is complete, then begin speaking your text slowly
and clearly into the microphone to add text to your message.
9. Release the key when you are finished speaking or to take a break. Press
and hold when you are ready to resume speaking.
45
Tips for Text Entry Using VoiceMode
• Use VoiceMode in a quiet place.
• Make sure you press and hold the
key before starting to speak.
• Speak clearly, and say each word distinctly.
• Pause for a second between each word.
• If you make a mistake or VoiceMode misunderstands you while dictating a
message, complete the sentence or message, then correct any errors using the
navigation and 0 (
) keys.
Correcting Errors
VoiceMode recognizes the most frequently used word that matches the word you
spoke into the microphone. To correct a VoiceMode error, do the following:
1. Use the navigation keys to highlight the word to be changed.
2. Press 0 (
) to display other words from the VoiceMode dictionary, if
available, or to enter the correct word, if it is not in the dictionary.
3. Use the navigation keys to highlight the desired word, then press
to
enter the selected word in your message.
Entering Text Using Word Mode
Word recognizes the most commonly used word for any sequence of key presses
and inserts that word into your message. It’s much faster than the traditional method
of text entry (Abc) and requires only one key press per letter of the word that you’re
spelling.
1. In idle mode, press the left soft key
press 1 (
) New Message, 1 (
new text message.
Message, then
) TXT Message to compose a
2. Enter the phone number or email address of the recipient, then press the
down navigation key to move to the Text field.
3. Press the left soft key
Abc to display a pop-up menu containing text
entry mode options.
4. Abc is highlighted by default. Use the up/down navigation keys to highlight
Word, then press
.
Section 5: Entering Text
46
Now, for practice, enter the word “Hello” into your message by pressing
each of the following keys only once:
H
E
L
L
O
Word recognizes that the most frequently used word for the sequence of numbers
entered. The word you just entered is “HELLO.” If more than one word shares the
same sequence, Word provides the most common of the two. Press 0 (
) to
display other words in the dictionary, if available.
Entering Upper and Lower Case
• Enter characters while in ABC mode by pressing the key that contains the
desired characters. Press 4 (
) for “G”.
• Press the key repeatedly to cycle through other available characters for that
key.
• Pause briefly when the desired character appears in the display to accept the
character and therefore insert it into the message.
• Press # (
) to enter a space.
• To cycle between uppercase, lower case, and initial caps for characters in ABC
).
mode, briefly press * (
In Landscape mode
• Enter characters while in ABC mode by using the QWERTY keyboard.
• Press the left soft key
Abc to select a text entry option.
• Press
to cycle between upper, lower case, or initial caps for characters
in ABC mode.
• Press the Spacebar (
) to enter a space.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % into a text message.
1. In idle mode, press the left soft key
1(
) New Message, 1 (
text message.
47
Message, then press
) TXT Message to compose a new
2. Enter the phone number or email address of the recipient, then press the
down navigation key to move to the Text field.
3. Press the left soft key
Abc to display a pop-up menu containing the
text entry mode options.
4. Abc is highlighted by default. Use the up/down navigation keys to highlight
Symbols, then press
appears in the display.
5. Press
Prev or
. The first of three screens containing symbols
Next to page through the other symbols, if
necessary.
6. Enter the key that corresponds with the symbol that you wish to enter. For
example, press 4 (
symbols.
) for an exclamation point (!) on the first page of
7. Repeat steps 3 through 6 to insert as many symbols into your message as
desired.
Entering Numbers
Enter numbers into a text message while in number mode (123). See "Changing the
Text Entry Mode" on page 44 for instructions on changing text entry modes.
1. In idle mode, press the left soft key
press 1 (
) New Message, 1 (
new text message.
Message, then
) TXT Message to compose a
2. Enter the phone number or email address of the recipient, then press the
down navigation key to move to the Text field.
3. Press the left soft key
Abc to display a pop-up menu containing the
text entry mode options.
4. Abc is highlighted by default. Use the up/down navigation keys to highlight
123, then press
.
5. Enter the key that corresponds with the number that you wish to enter. For
example, press 4 (
) for the number 4.
6. When you are finished adding numbers, press the left soft key
select a different method of text entry or press
message.
123 to
SEND to send your
In Landscape mode
• For more detailed procedures, refer to "Entering Numbers - Landscape mode"
on page 128.
Section 5: Entering Text
48
Section 6: Understanding Your Contacts
Topics Covered
• Opening Contacts Menu
• Contacts Icons
• Adding a Contact
• Adding Pauses
• Contact Groups
• Finding a Contact Entry
• Editing an Existing Contact Entry
• Deleting a Contact Entry
• Storing Numbers After a Call
• Speed Dialing
• My Name Card
• Finding My Phone Number
This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry,
or group.
Opening Contacts Menu
The Contacts menu provides access to powerful features such as adding Groups,
creating and sending V-cards, and viewing the phone number assigned to your
phone by Verizon Wireless.
1. In idle mode, press
MENU, Contacts is highlighted, press
.
• New Contact: Add a number, or e-mail address to your Contacts.
• Contact List: Find a phone number by Name.
• Groups: Add new or rename one of your five default groups.
• Speed Dials: Set a speed dial for a contact.
• My Name Card: Create a business card, which can then be sent to others as an
attachment
2. Use the navigation key to highlight the
Contacts sub-menu of your
choice, then press
49
.
Contacts Icons
You can assign multiple entries to a contact. The icons in the following table
represent all available entry types
Mobile 1 icon. Enter a mobile number for the entry in this field.
Home icon. Enter a home number for the entry in this field.
Work icon. Enter the work number for the entry in this field.
E-mail 1 icon. Enter an e-mail address for the entry in this field.
Group icon. Select an available group to associate with the entry in this
field.
Picture icon. Select an available pre-loaded image or downloaded image
from Picture ID to associate with the contact.
Ringtone icon. Select a ringtone to associate with the entry in this field.
Mobile 2 icon. Enter a secondary mobile number for the entry in this
field.
Fax icon. Enter a fax number for the entry in this field.
E-mail 2 icon. Enter a secondary e-mail address for the entry in this
field.
Notes icon. Enter a note for the entry in this field.
Adding a Contact
When you add information to your Contacts, you can add it as a new entry or as an
existing entry.
Method 1
Storing a number from idle mode
1. In idle mode, press
MENU, Contacts is highlighted, press
2. Press 1 (
) New Contact to enter the contact information.
3. Enter a name for the entry using the keypad.
.
4. Use the navigation key to highlight the appropriate type (Mobile, Home,
Work, E-mail, etc.). Once highlighted, use the keypad to enter required
information.
Section 6: Understanding Your Contacts
50
Use the navigation key to highlight other type fields, if desired. Enter
information using the keypad.
5. To assign a Speed Dial location after entering the number, press the right
soft key
Options. Highlight Set Speed Dial and press
.
Highlight an unassigned location and press
SET. A confirmation
message appears in the display, Yes is highlighted, press
to add the
Contact to the speed dial location.
Note: Voicemail is assigned to Speed Dial location 1.
Note: You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile
1, Mobile 2, and Fax.).
6. When you’re finished entering information for the entry, press
SAVE to
save the entry to your Contacts.
Method 2
Storing a number from idle mode
You can add new numbers to the Contacts by simply entering the number while the
phone is in idle mode, then following the necessary prompts to complete the
process.
1. In idle mode, enter the number that you wish to save using the keypad,
then press the left soft key
Save. You’re prompted to select from
Create New Contact or Update Existing.
2. Press 1(
press 2 (
Note: Press 3 (
) to enter the number as a Create New Contact, or
) to add the number to Update Existing.
) to save the entry to Notepad.
3. If you selected Create New Contact, the following types are available.
•
Mobile 1
•
Mobile 2
•
Home
•
Work
•
Fax
4. If you selected Update Existing, proceed to Step 9.
5. Use the up/down navigation keys to highlight the desired entry type
(mobile, home, work, etc.) then press
51
.
6. Enter a name for the entry using the keypad. Press the left soft key
Abc if you wish to select a different method of text entry, such as Word,
Abc, ABC, 123, or Symbols.
7. To assign a Speed Dial location, use the up/down navigation key to
highlight the number you would like to assign to a Speed Dial location and
press the right soft key
Options. Highlight Set Speed Dial and press
.
Highlight an unassigned location and press
SET. A confirmation
message appears in the display, Yes is highlighted, press
to add
Contact to the speed dial location.
Note: Voicemail is assigned to Speed Dial location 1.
Note: You can assign a speed dial location to each number associated with the contact (Home, Work, Mobile
1, Mobile 2, and Fax.).
8. When you’re finished entering information for the entry, press
SAVE.
The entry is saved to your Contacts.
9. If you selected Update Existing, the Contact List opens in Search mode.
Use the navigation key to browse through entries, or enter the name of the
entry using the keypad. Once you’ve highlighted the entry you wish to
update, press
.
10. An UPDATE EXISTING pop-up screen with a selection list of entry types
displays. Use the up or down navigation keys to highlight the desired type
then press
. The number is added to the selected entry and saved to
your Contacts.
Method 3
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of the caller to your Contact
List.
Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.
1. After you press
to end your call, the call time, length of call and
phone number appears in the display.
Section 6: Understanding Your Contacts
52
2. Press the right soft key
Save. You’re prompted to confirm this as a
Create New, or Update Existing.
3. Follow the on-screen prompts to designate other information.
Adding Pauses
Calls to automated systems often require a password or account number. Instead of
manually entering numbers each time, store the numbers to your Contacts along
with special characters called pauses.
1. In idle mode, enter the number.
2. Press
Options use the navigation key to highlight Wait (A “W”
appears in the display.) or 2-sec Pause (A “P” appears in the display.) and
press
.
• Wait: A hard pause stops the calling sequence until further input from you.
• 2-sec pause: A two-second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
3. When you’re finished entering information for the entry, press
SAVE.
4. Continue with Step 2, Method 2 of Adding a Contact.
Note: Entering multiple two-second pauses extends the length of a pause. For example, two consecutive
two-second pauses cause a total pause time of four seconds. Keep in mind pauses count as digits towards
the 48-digit maximum.
Contact Groups
You can place Contact entries into categories, called “Groups.” Groups allow you to
search your Contacts faster, quickly send messages to one or more group members,
and more.
Note: By default, new entries to your Contacts are placed into the No Group unless another group is
specified.
View Groups
1. In idle mode, press
MENU, Contacts is highlighted, press
.
2. Press 3 (
) Groups. The following groups appear in the display.
• No Group
• Business
• Colleague
• Family
• Friends
53
3. Use the navigation key to highlight the desired group, then press
to
access the group and view its contents.
Move an Entry to Another Group
1. In idle mode, press the right soft key
Contacts. Use the navigation
key to highlight the contact you wish to move.
2. Press the left soft key
Edit. Use the up/down navigation key to scroll
to the Group option.
3. Press the left soft key
Set. Choose from the following groups:
• No Group
• Business
• Colleague
• Family
• Friends
4. Use the navigation key to highlight the group containing the entry that you
wish to move, then press
5. Press
.
SAVE. The selection has been saved to the designated group.
Create a New Group
In addition to the five groups already in your phone, you can create additional groups
(a maximum of 25). New groups can be named anything you like as long as their
names are within the 32-character limit.
1. In idle mode, press
2. Press 3 (
MENU, Contacts is highlighted, press
.
) Groups. Your existing groups appear in the display.
3. Press the left soft key
New. A NEW GROUP pop-up menu displays
with the “Enter New Name” field highlighted.
4. Enter the Groups name.
5. Press
SAVE to save. The Groups list now displays the new group
added.
Send a Text Message to Members of a Group
Use Send Message in the Group feature to send a message to as many as 10
members of a group at once.
Note: Text messaging availability varies when roaming off the Verizon Wireless Network.
1. In idle mode, press
2. Press 3 (
MENU, Contacts is highlighted, press
.
) Groups. Your existing groups appear in the display.
Section 6: Understanding Your Contacts
54
3. Highlight the desired group name and press the right soft key
Options. Highlight Send TXT Message and press
.
4. Use the down navigation key to highlight the contacts in the group you want
to send a message. Press
to send messages to.
5. Press the left soft key
to place a checkmark next to each selection
Done after selecting up to 10 contacts.
Note: You can mark up to 10 members of a group for message distribution. If you try and mark an 11th
member, you’ll be notified that “MAXIMUM RECIPIENTS IS 10”.
6. Press the down navigation key to place the cursor in the Text field.
7. Enter the content of your message using the keypad.
8. To send the text message, press
SEND.
Send a Picture Message to Members of a Group
Note: Only available within Verizon Wireless Enhanced Services Area.
1. In idle mode, press
2. Press 3 (
MENU, Contacts is highlighted, press
.
) Groups. Your existing groups appear in the display.
3. Highlight the desired group name and press the right soft key
Options. Highlight Send Picture Message and press
.
4. Use the down navigation key to highlight the contacts in the group to which
you want to send a message. Press
selection to send messages to.
5. Press the left soft key
to place a checkmark next to each
Done after selecting up to 10 contacts.
6. Press the down navigation key to move the cursor into the following entry
fields:
• Text: Add text to the Picture Message.
• Picture: Add an image from the My Pictures to the message.
• Sound: Add sound to the Picture Message.
• Subject: Add a subject to the Picture Message.
• Name Card: Attach a Name Card or an entry in your Contacts to the message.
7. Once you’ve finished adding the desired content to your Picture Message,
press
SEND to send the Picture Message to the intended recipients.
55
Send a Video Message to Members of a Group
Note: Only available within Verizon Wireless Enhanced Services Area.
1. In idle mode, press
2. Press 3 (
MENU, Contacts is highlighted, press
.
) Groups. Your existing groups appear in the display.
3. Highlight the desired group name and press the right soft key
Options. Highlight Send Video Message and press
.
4. Use the down navigation key to highlight the contacts in the group to which
you want to send a message. Press
selection to send messages to.
5. Press the left soft key
to place a checkmark next to each
Done after selecting up to 10 contacts.
6. Press the down navigation key to move the cursor into the following entry
fields:
• Text: Add text to the Video Message.
• Video: Add an image from the My Video to the message.
• Subject: Add a subject to the Video Message.
• Name Card: Attach a Name Card or an entry in your Contacts to the message.
7. Once you’ve finished adding the desired content to your Video Message,
press
SEND to send the Video Message to the intended recipients.
Finding a Contacts Entry
From idle mode, you can quickly open the Contacts list. Contacts is a quick way of
viewing entries you’ve stored in the Contacts list.
1. In idle mode, press the right soft key
Contacts. The Contact List
displays.
2. In the Go To field, enter the first and second letters of the name you wish to
search until it is highlighted.
Editing an Existing Contact Entry
1. In idle mode, press
2. Press 2 (
MENU, Contacts is highlighted, press
.
) Contact List.
3. Use the navigation key to highlight the contact list entry and press the left
soft key
Edit.
4. Use the navigation key to highlight the name, number, e-mail address, or
other field that you wish to edit.
5. Press
to backspace and delete numbers, text, or symbols.
Section 6: Understanding Your Contacts
56
6. Press and hold
to erase all numbers in the highlighted field.
7. Use the keypad to re-enter numbers, text, or symbols.
8. When you’re finished editing the entry, press
SAVE. Your changes are
saved.
Deleting a Contact Entry
1. In idle mode, press
2. Press 2 (
MENU, Contacts is highlighted, press
.
) Contact List.
3. Use the navigation key to display the contact list entry and press
VIEW.
4. Press the left soft key
Erase.
5. A pop-up “ERASE ENTRY?” screen displays.
6. Highlight Yes or No, then press
.
Storing Numbers After a Call
Once you’ve finished a call, you can store the number of the caller to your Contact
List.
Note: If the call was incoming and Caller ID information was unavailable, then the store option is also
unavailable.
1. After you press
to end your call, the call time, length of call and
phone number appears in the display.
2. Press the right soft key
Save. You’re prompted to confirm this as a
Create New, or Update Existing.
3. Follow the on-screen prompts to designate other information.
Store a number in idle mode
Store a phone number by entering the number in idle mode, then press
Save. Follow the screen prompts to assign number types and other
information.
Speed Dialing
Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contact List quicker.
Speed dialing allows you to press and hold a key (or keys) to dial the number
associated with those key(s). There are three types of speed dialing; 1-touch,
2-touch, and 3-touch dialing.
57
Note: Memory location 001 is reserved for voicemail.
1-touch dialing
Call phone numbers assigned to memory locations 002 - 009 by pressing and
holding the any of the 2 - 9 keys. For example, to speed dial the number assigned to
location 2, press and hold 2 (
) until the name and number appear in the
display and the number is dialed.
2-touch dialing
Call phone numbers assigned to keys 010 through 099 by briefly pressing the first
key, then pressing and holding the second key. For example, to speed dial the
number assigned to 013, briefly press 1 (
), then press and hold 3 (
)
until the number dials.
3-touch dialing
Call phone numbers assigned to memory locations 100 through 999 by briefly
pressing the first and second keys, then pressing and holding the third key. For
example, to dial location number 113, briefly press 1 (
), 1 (
), then
press and hold 3 (
) until the number dials.
Assign a speed dial location
1. In idle mode, press
MENU, Contacts is highlighted, press
.
2. Press 4 (
) Speed Dials. The Speed Dials screen displays with the
first available number highlighted.
3. Use the navigation keys to highlight the number you wish to assign or enter
the speed dial location using the keypad, press
SET.
4. The SET SPEED DIAL screen displays.
5. Use the navigation keys to highlight the entry you want, then press
.
6. At the pop-up screen, use the navigation key to highlight Yes or No and
press
.
7. Continue to assign speed dial entries or press the
key to return to
idle mode.
Section 6: Understanding Your Contacts
58
My Name Card
My Name Card allows you to create a virtual business card. Once completed, you
can send the card to recipients as a V-card attachment.
1. In idle mode, press
2. Press 5 (
MENU, Contacts is highlighted, press
.
) My Name Card.
3. My Name Card opens with the Name field highlighted.
4. Enter information in each of the fields as desired. Use the navigation key to
move between fields, then use the keypad to enter information.
5. When finished, press
to save the Name Card.
Finding My Phone Number
My Number displays the ten-digit number assigned to your phone.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 9 (
) Phone Info.
) My Number. The mobile device, phone number, and
mobile identification number are displayed.
3. Press 1 (
59
Section 7: Messaging
Topics Covered
• Types of Messages
• Retrieving New Messages
• Creating and Sending Text Messages
• Creating and Sending Picture-Video Messages
• Creating and Sending Messages in Landscape Mode
• Receiving Picture-Video Messages
• New Sketch Messages
• Postcard
• Message Folders
• Changing Message Settings
• Wireless Sync Email
• Voicemail
• E-Mail
• Mobile IM
• Chat
This section allows you to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone is capable of sending email, text, picture, video, sketch, post cards and
voicemail messages. Send email, text, picture, and video messages by simply
entering the email address or the phone number of the recipient in the To: <.........>
or Send To field when creating a new message.
Section 7: Messaging
60
Retrieving New Messages
While text messages from other phones are delivered directly to your phone, Picture
and Video messages and emails will be stored in the Inbox of the message server
and the server will alert you to new messages. Therefore you need to retrieve new
messages to your phone and read them on the phone.
Retrieving a Text Message
When you receive a message in idle mode, the message ringer sounds, (unless
turned off), and New Text Message appears in the display along with the closed
envelope icon
. The date and time of the message also appear in the display.
1. Press
to View now, or press the down navigation key to highlight
View later and press
. The message is saved to your inbox where you
can view it later.
2. With the message open, press the right soft key
Options to Forward,
Reply w/copy, Save Quick Text, Lock, Add To Contacts or Message Info.
Press the left soft key
Erase to erase the message.
3. With the message open, press
REPLY to return a message to the
sender.
Note: When viewing a Text message, you can view the previous Text message by pressing the left
navigation key and view the next Text message by pressing the right navigation key.
Creating and Sending Text Messages
You can send text messages to another mobile phone or to an email address.
1. In idle mode, press the left soft key
Message.
2. Press 1 (
) New Message.
3. Press 1 (
) TXT Message to compose a new text message.
4. Enter the phone number or email address of the recipient. At any point
while entering your recipient(s) phone number or email address, press the
123 or
Add soft keys to display additional options.
• Press the left soft key
123 to change Text Entry Mode. Choose Word, Abc,
ABC, 123, Symbols and Shortcuts modes of text entry.
• Press the right soft key
Add to add a recipient From Contacts, Groups, or
Recent Calls.
Note: If you do not select an option press the
61
to return to your message.
5. Press the down navigation key or
key to move to the Text field. In the
text field, compose your message using the keypad. At any point while
composing a message, press the
Abc or
Options soft keys to
display additional options.
• Press the left soft key
Abc to change Text Entry Mode. Choose
VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.
• Press the right soft key
Options to display a pop-up menu with the
options listed:
• Save As Draft: Save the message to your Draft folder.
• Add Graphic: Lists preloaded and downloaded graphics.
• Add Animation: Lists preloaded and downloaded animations.
• Add Sound: Lists preloaded and downloaded sounds.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
• Add Name Card: Attach My Name Card information or information from one of
your Contacts.
• Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.
• Priority Level: Save the message with a High or Normal priority.
• Callback #: Provides the ability to send a callback # with the message.
• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
Note: If you do not select an option press the
to return to your message.
6. Use the navigation key to highlight an option. Press
to perform the
function for the option, or to enter its sub-menu.
7. To send the message, press
SEND.
Section 7: Messaging
62
Creating and Sending Picture-Video Messages
Note: Only available within Verizon Wireless Enhanced Services Area.
Picture-Video Message combines text, picture, video and sound creating an
message intuitive message You can add sounds and attach a Name Card or Contact
entry to your Picture-Video Message. This is also known as Multimedia Messaging
(MMS).
1. In idle mode, press the left soft key
2. Press 1 (
Message.
) New Message.
3. Press 2 (
) Picture Message or 3 (
compose a new message.
) Video Message to
4. Enter the phone number or email address of the recipient. At any point
while entering your recipient(s) phone number or email address, press the
123 or
Add soft keys to display additional options.
• Press the left soft key
123 to change Text Entry Mode. Choose Word,
Abc, ABC, 123, Symbols and Shortcuts modes of text entry.
• Press the right soft key
Add to add a recipient From Contacts, Groups,
Recent Calls, or To PIX Place.
Note: If you do not select an option press the
to return to your message.
5. Press the down navigation key or
key to move to the Text field. In the
text field, compose your message using the keypad. At any point while
composing a message, press the
Abc or
Options soft keys to
display additional options.
• Press the left soft key
Abc to change Text Entry Mode. Choose
VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.
• Press the right soft key
Options to display a pop-up menu with the
options listed:
• Preview: Shows the message before it is sent.
• Save As Draft: Save the message to your Draft folder.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
• Priority Level: Save the message with a High or Normal priority.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
63
Note: If you do not select an option press the
to return to your message.
6. Press the down navigation key to highlight the Picture-Video field. Press
the left soft key
the prompts. Press
My Pic-My Video to add a Picture/Video, and follow
to attach the highlighted object.
7. If creating a Picture message, press the up/down navigation key to
highlight the Sound field. Press the left soft key
sound.
Sounds to select a
Press the up/down navigation key to highlight the desired sound or
highlight Record New to record a sound and press
.
8. Press the down navigation key to highlight the Subject field. Press the left
soft key
Abc to change entry mode. Press the right soft key
Options to Add Quick Text. Press the up/down navigation key to
highlight the desired Quick Text phrase, and press
.
9. Press the down navigation key to add Name Card. Press the left soft key
Add to select My Name Card or an entry from your Contacts list.
Follow the prompts and press
to insert.
10. Once all fields are complete, press
to send the message to the
intended recipient(s).
Creating and Sending Messages in Landscape Mode
• For more detailed procedures, refer to "Creating and Sending Messages Landscape Mode" on page 127.
Receiving Picture-Video Messages
When you receive a new Picture-Video Message, NEW PIC-VIDEO MSG appears in
the display along with the options View Now, or View Later.
Note: For the option Reject to appear in the display when you receive a Picture-Video Message, Auto
Receive mode must be set to Off in the Message Settings menu.
1. When you receive a new Picture-Video Message, press
View Now.
Loading... appears in the display.
2. After loading, the image (and text if any) contained in the
Picture-Video Message appear in the display.
3. Use the navigation keys to scroll through the message or view the entire
picture if necessary.
Section 7: Messaging
64
4. Press the
Mute/Unmute/Play (to play the attached sound byte or
video) or
Options soft keys to display the following options:
• Play Again: Replays the sound in the message.
• Forward: Forward the message to another recipient.
• Erase: Deletes the message.
• Save Picture: Saves the picture in a Picture-Video message to My Picture
• Save Sound: Saves the sound received with the message.
• Save As Ringtone: Saves the sound as a ringtone.
• Save Quick Text: Saves the text received in the message to the Quick Text list.
• Lock/Unlock: Locks the message to prevent deletion.
• Add To Contacts: Save the number of the sender to your Contacts as a new entry
or add to an existing entry.
• Message Info: Provides the following information: From and Callback Number,
Priority, Message Type, Size and if a Graphic, Sound or Name Card were included
in the message.
Note: When viewing a Picture-Video message, you can view the previous Picture-Video message by
pressing the left navigation key and view the next Picture-Video message by pressing the right navigation
key.
Receive Messages While in a Call
1. When you receive a message while in a call, the NEW TXT MESSAGE or
NEW PIC-VIDEO MESSAGE(S) dialog box appears in the display.
Note: Text messages can only be viewed during a call. Picture-Video messages can not be downloaded
during a call.
2. You can view the message without disconnecting your call by pressing
Options and then select Messaging.
3. Press 2 (
) Inbox, use the up/down navigation keys to highlight the
message you want to view and press
OPEN to view the message.
View a Picture-Video Message Later
1. When you receive a new Picture-Video message that you would like to view
later, highlight View Later and press
.
2. To view the message, press the left soft key
Message, 2 (
)
Inbox.
3. Use the navigation key to highlight the unopened message, then press
OPEN. The INBOX screen appears first with information about the message.
Press
DOWNLOAD to view Picture-Video message.
65
New Sketch Messages
You can convert a picture to a black and white sketch drawing that can be sent with
a message. For information on taking a picture see "Take Pictures" on page 108. For
information on sending the message, see "Receiving Picture-Video Messages" on
page 64.
Postcard Message
Allows you send pictures saved in your phone or take new pictures with your camera
and send as a postcard. A postcard message merges handwritten notes with
pictures you have taken with your phone. Please note that downloaded photos that
have DRM protection can not be used with this feature.
Creating and Sending a Postcard
1. In idle mode, press the left soft key
2. Press 1 (
Message.
) New Message.
3. Press 5 (
) Postcard Message to compose a new message.
MY PICTURES appear in the display.
4. Use the navigation key to select a photo and press
. The camera is
activated.
5. Press
TAKE to capture an image of your handwritten note. A merged
picture of your note and picture will be Shown.
6. Press the right soft key
Options to customize the image. The
following options appear in the display:
• Ink Color: Allows you to choose the outline color of the image.
• Shadow: Allows you to turn shadow On or Off.
• Rotate: Allows you to rotate the image. Press the right or left navigation to rotate
the image.
• Zoom: Allows you adjust the zoom on the image. Press the left or right navigation
key to adjust the zoom.
• Move: Allows you to move the image. Press the navigation key to move the
image.
Press the left soft key
Erase to erase the image and return to camera
mode.
7. Press
SEND.
8. Enter the phone number or email address of the recipient. At any point
while entering your recipient(s) phone number or email address, press the
123 or
Add soft keys to display additional options.
Section 7: Messaging
66
• Press the left soft key
123 to change Text Entry Mode. Choose Word,
Abc, ABC, 123, Symbols and Shortcuts modes of text entry.
• Press the right soft key
Add to add a recipient From Contacts, Groups,
Recent Calls, or To PIX Place.
Note: If you do not select an option press the
to return to your message.
9. Press the down navigation key or
key to move to the Text field. In the
text field, compose your message using the keypad. At any point while
composing a message, press the
Abc or
Options soft keys to
display additional options.
• Press the left soft key
Abc to change Text Entry Mode. Choose
VoiceMode, Word, Abc, ABC,123, and Symbols modes of text entry.
• Press the right soft key
Options to display a pop-up menu with the
options listed:
• Preview: Shows the message before it is sent.
• Save As Draft: Save the message to your Draft folder.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
• Priority Level: Save the message with a High or Normal priority.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
Note: If you do not select an option press the
to return to your message.
10. Press the down navigation key to highlight the Picture field. Press the left
soft key
My Pic to change picture.
11. Press the down navigation key to highlight the Sound field. Press the left
soft key
Sounds to select a sound.
Press the up/down navigation key to highlight the desired sound or
highlight Record New to record a sound and press
.
12. Press the down navigation key to highlight the Subject field. Press the left
soft key
Abc to change entry mode. Press the right soft key
Options to Add Quick Text. Press the up/down navigation key to
highlight the desired Quick Text phrase, and press
.
13. Press the down navigation key to add Name Card. Press the left soft key
Add to select My Name Card or an entry from your Contacts list.
Follow the prompts and press
to insert.
67
14. Once all fields are complete, press
SEND to send the message to the
intended recipient(s).
Message Folders
Your phone provides default message folders for your Text and Picture-Video
messages.
Note: To quickly view all messages in the Inbox, Sent, or Drafts folders, open one message and then press
the right navigation key to view the next message or press the left navigation key to view the previous
message.
Inbox
Received messages of all types are stored in the Inbox folder.
1. In idle mode, press the left soft key
2. Press 2 (
Message.
) Inbox.
3. Use the navigation key to highlight the message that you wish to view.
4. Press
OPEN to view contents of the highlighted message.
5. While viewing a message press the right soft key
Options to display
the options listed.
• Play Again: Replays a Picture-Video message.
• Forward: Forward the message to another recipient.
• Erase: Deletes the message. Only displays in menu when a sound byte isn’t
attached to the message that was sent.
• Save Picture: Saves the picture-video sent in a Picture-Video message to My
Pictures or My Video.
• Save Sound: Saves the sound byte received with the message in My Sounds.
• Save As Ringtone: Saves the sound byte received with the message a ringtone.
• Save Quick Text: Saves the text received in the message to the Quick Text list.
• Save Name Card: Saves the name card received in the message.
• Lock/Unlock: Secures/Unsecures the message to prevent deletion.
• Add To Contacts: Save the number of the sender to your Contacts as a new entry
or add to an existing entry.
• Message Info: Provides the following information: From (also provides the date
and time the message was sent), Callback Number, Priority, Message Type, Size
and if a Picture, Sound or Name Card were included in the message.
Note: If no sound byte or video is attached to the message, press the left soft key
Erase to delete the
message or press the left soft key
Mute/Unmute/Play to play or mute/unmute the sound byte
attached to the message.
Section 7: Messaging
68
6. Press
REPLY to return a message to the sender.
Note: When Auto Erase is turned on, the oldest read Text message is replaced by an incoming Text message
when 50 Text messages are stored in the Inbox, and the oldest read Picture-Video message is replaced by
an incoming Picture-Video message when 80 Picture-Video messages are stored in the Inbox. See
‘Changing Message Settings” on page 73 for information on how to set Auto Erase and Auto Receive.
Sent
Your phone stores messages in the Sent folder, regardless of whether the message
was successfully transmitted. Verify if and when a message or e-mail was
successfully transmitted by enabling the Enh. Delivery Ack feature in Message
Settings.
Note: Enh. Delivery Ack can't be set for Picture-Video message.
Review Messages in the Sent Folder
1. In idle mode, press the left soft key
2. Press 3 (
Message.
) Sent.
3. Use the navigation key to highlight the message you wish to review, then
press
OPEN.
4. While viewing the message, press the right soft key
Options to
display options listed:
• Play Again: Replays a Picture-Video message.
• Forward: Forwards the message to another recipient.
• Erase: Deletes the message. Only displays in menu when a sound byte isn’t
attached to the message that was sent.
• Lock/Unlock: Locks the message to prevent deletion.
• Save Quick Text: Saves the text sent in the message to the Quick Text list.
• Add To Contacts: Adds the sender’s information to your contact list.
• Message Info: Provides the following information: Send To Number (also provides
the date and time the message was sent), Priority, Message Type, Size,
Attachments (if a Graphic, Sound or Name Card were included in the message),
Status, and Error Code.
Note: If no sound byte or video is attached to the message, press the left soft key
Erase to delete the
message or press the left soft key
Mute/Unmute/Play to play or mute/unmute the sound byte
attached to the message.
5. Use the navigation key to highlight the desired option.
6. Press
69
to perform the function for the highlighted option.
7. Press
RESEND to send the message to the recipeint again.
8. From the Sent menu, press the left soft key
Erase to delete the
message from the Sent folder. Highlight Yes to delete, or No to return to the
Sent menu.
Drafts
Draft messages are those that have been composed but never sent. You can return
to the Drafts folder at any time to view, edit, or send a draft message.
Create a Draft Text Message
1. In idle mode, press the left soft key
2. Press 1 (
Message.
) New Message.
3. Select the type of message you want to create.
4. Enter the phone number of the recipient, then press the down navigation
key.
5. Compose your message using the keypad, then press the right soft key
Options. A pop-up menu appears in the display.
6. Scroll down with the navigation key until Save As Draft is highlighted, then
press
. A confirmation message appears in the display and your
message is saved to the Drafts folder.
View and Edit Draft Messages
1. In idle mode, press the left soft key
2. Press 4 (
Message.
) Drafts.
3. Use the navigation key to highlight the message you wish to view, then
press
EDIT. The message opens in the Text field with the message
text displayed.
4. Press
to backspace and delete any characters in the display, if
desired. Press and hold
to erase all characters in the field.
5. Press the right soft key
Options. A pop-up menu appears in the
display with the options listed.
• For Text Messages the following options appear in the display:
•
•
•
•
•
Save As Draft: Save the message to your Draft folder.
Add Graphic: Lists preloaded and downloaded graphics.
Add Animation: Lists preloaded and downloaded animations.
Add Sound: Lists preloaded and downloaded sounds.
Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
additional messages by pressing the right soft key
New and erase
messages by pressing the left soft key
Erase.
Section 7: Messaging
70
• Add Name Card: Attach My Name Card information or information from one of
your Contacts.
• Edit Text Format: Allows you to edit the text size, alignment, style, color, and
background color.
• Priority Level: Save the message with a High or Normal priority.
• Callback #: Provides the ability to send a callback # with the message.
• Enh. Delivery Ack: Displays a pop-up screen notifying the message sent has been
received.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
• For Picture-Video Messages the following options appear in the display:
• Preview: Allows you to preview the message.
• Save As Draft: Save the message to your Draft folder.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
New and erase
additional messages by pressing the right soft key
messages by pressing the left soft key
Erase.
• Priority Level: Save the message with a High or Normal priority.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
6. Use the navigation key to highlight the desired option. Press
to perform
the function for the highlighted option.
7. Press the down navigation key to highlight the following fields for Picture-
Video Messages and press the right soft key
following options:
Options to display the
• Picture-Video: Insert a picture-video clip.
Note: Press the left soft key
My Pic-My Video to add a new picture or video clip.
•
•
•
•
•
•
Preview: Allows you to preview the message.
Save As Draft: Save the message to your Draft folder.
Priority Level: Save the message with a High or Normal priority.
Remove Picture-Video: Deletes the attached Picture-Video file.
Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
Sound: Insert a sound byte.
Note: Press the left soft key
Sounds to add a new sound byte.
• Preview: Allows you to preview the message.
• Save As Draft: Save the message to your Draft folder.
• Priority Level: Save the message with a High or Normal priority.
71
•
• Remove Sound: Deletes the attached sound byte file.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
Subject: Insert the subject of your message.
Note: Press the left soft key
•
Abc to change text entry mode.
• Preview: Allows you to preview the message.
• Save As Draft: Save the message to your Draft folder.
• Add Quick Text: Choose from up to 12 pre-loaded messages. You can add 10
New and erase
additional messages by pressing the right soft key
messages by pressing the left soft key
Erase.
• Priority Level: Save the message with a High or Normal priority.
• Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
Name Card: Insert and name card.
Note: Press the left soft key
Add to add a name card.
•
•
•
•
Preview: Allows you to preview the message.
Save As Draft: Save the message to your Draft folder.
Priority Level: Save the message with a High or Normal priority.
Cancel Message: Cancels the message and allows you to save it in the Drafts
folder.
8. Use the navigation key to highlight the desired option. Press
to
perform the function for the highlighted option.
9. Once you’ve returned to the message composer, press
to send the
message, if desired.
Erase Options
You can erase unlocked messages in your Inbox, Drafts folder, or Sent folder.
Locked messages are not erased.
To erase messages:
1. In idle mode, press the left soft key,
2. Press the right soft key
Message.
Options.
3. The following options are available:
• Erase Inbox: Erases unlocked messages in your Inbox.
• Erase Sent: Erases unlocked messages in your Sent folder.
• Erase Drafts: Erases unlocked messages in your Drafts folder.
Section 7: Messaging
72
• Erase All: Erases unlocked messages in all message folders
(Inbox, Drafts and Sent).
Changing Message Settings
This menu allows you to define settings for messages sent or received on your
phone. To access your message settings, use the following steps:
1. In idle mode, press the left soft key,
2. Press the left soft key
Message.
Settings.
3. Select the message type you would like to change and press
. Choose
from the following options:
• All Messages:
•
73
Allows you make a broadcast change to all message settings.
• Auto Save: Saves all messages sent. Use the navigation keys to select On, Off, or
Prompt.
• Auto Erase: Erases the oldest message of the same type (Text or Picture-Video)
when the maximum number of received messages of that type is exceeded in the
Inbox. For example, the oldest read Text message is replaced by an incoming Text
message when 50 Text messages are stored in the Inbox, and the oldest read
Picture-Video message is replaced by an incoming Picture-Video message when
80 Picture-Video messages are stored in the Inbox. Choose from On or Off.
• Quick Text: Displays the Quick Text pre-defined entries for Text Message and
Picture-Video Message. Press the right soft key
New to add to the Quick
Text list. Enter your new text and press
. The new Quick Text item shows in
the first position of the list.
• Voice Mail #: Enter the speed dial entry set for your voicemail.
• Entry Mode: Sets the default entry mode for messaging. Choose from Word, Abc,
ABC, or 123.
• Callback #: Displays the callback number in the text message. Choose from On or
Off.
• Signature: Adds the signature text to each message sent. Choose from None or
Custom.
TXT Message: Allows you to customize Text Message settings.
• Auto View: Automatically displays the text message when received. Choose from
On or Off.
• Block / Unblock: Allows the user to block/unblock message received from a
specific phone number. Choose from Set Block, Set Unblock, and View Blocked
List.
• Signature: Adds the signature text to each message sent. Choose from None or
Custom.
• Picture-Video Message: Allows you to customize Picture-Video Message
settings.
• Auto Receive: Automatically receives messages into your Inbox. Choose from On
or Off.
• Signature: Adds the signature text to each message sent. Choose from None or
Custom.
Wireless Sync Email
Wireless Sync from Verizon Wireless provides wireless synchronization of email,
calendar and contact information with your mobile device. Wireless Sync can
synchronize your business email, personal email or both. Wireless Sync supports
Microsoft Exchange, Lotus Domino, POP3 and IMAP email systems. Visit
www.wsync.com for more information on options for configuring Wireless Sync and
to create your account.
*Airtime is required for use.
• For more detailed procedures, refer to "Wireless Sync Email - Landscape
Mode" on page 128.
Voicemail
New voicemail alerts are sent via Text message. These message indicate how many
new and urgent voicemails are in your box. Open the text message to view the
number of new and urgent voice messages in your voice mailbox. If a caller leaves a
callback number, this number will also be sent via Text message.
Receive Voicemail Messages
When you receive a new voicemail message you’ll hear a sound and an Text
message appears in the display.
1. Press the up/down navigation keys to select Listen Now or Listen Later.
2. Press
.
View Voicemail Messages in the Inbox Folder
1. In idle mode, press the left soft key,
2. Press 6 (
3. Press
Message.
) Voicemail.
CALL to dial voicemail and retrieve your message(s).
E-Mail
• For more detailed procedures, refer to "E-Mail - Landscape Mode" on page
129.
Section 7: Messaging
74
Mobile IM
• For more detailed procedures, refer to "Mobile IM - Landscape Mode" on page
130.
Chat
• For more detailed procedures, refer to "Chat - Landscape Mode" on page 130.
75
Section 8: Changing Your Settings
Topics Covered
• My Account
• Tools
• Bluetooth Menu
• Sounds Settings
• Display Settings
• Phone Settings
• Call Settings
• Memory
• Phone Info
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
My Account
The My Account menu connects to the Verizon Wireless Mobile Web. You can setup
Favorites or choose from the available applications.
• For more detailed procedures, refer to "My Account - Landscape Mode" on
page 131.
Tools
The Tools menu provides the ability to access the following menus:
• Voice Commands: For more information see, "VoiceSignal™" on page 30.
• Calculator: For more information see, "Calculator" on page 114.
• Calendar: For more information see, "Calendar" on page 116.
• Alarm Clock: For more information see, "Alarm Clock" on page 118.
• World Clock: For more information see, "World Clock" on page 119.
• Stop Watch: For more information see, "Stop Watch" on page 120.
• Notepad: For more information see, "Notepad" on page 120.
Section 8: Changing Your Settings
76
Bluetooth Menu
About Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
Note: When connected to your Bluetooth headset, press the headset send key to use VoiceSignal’s Voice
Dial feature.
Bluetooth Service Profiles
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
Your phone supports the following profile service:
• HSP: Headset profile
The HSP describes how a Bluetooth enabled headset should communicate
with a computer or other Bluetooth enabled device such as a mobile
phone. When connected and configured, the headset can act as the
remote device’s audio input and output interface.
• HFP: Hands-free profile*
HFP describes how a gateway device can be used to place and receive
calls for a hand-free device. A typical configuration is an automobile using
a mobile phone for a gateway device. In the car, the stereo is used for the
phone audio and a microphone is installed in the car for sending outgoing
audio of the conversation. HFP is also used for a personal computer to act
as a speakerphone for a mobile phone in a home or office environment.
• SPP: Serial Port profile
SPP defines how to set-up virtual serial ports and connect two Bluetooth
enabled devices.
77
• DUN: Dial Up Networking
DUN provides a standard to access the Internet and other dial-up services
over Bluetooth wireless technology. The most common scenario is
accessing the Internet from a laptop by dialing up on a mobile phone,
wirelessly.
• OPP: Object Push Profile (vCard only)
* For vehicle/accessory compatibility, go to www.verizonwireless.com/bluetooth chart. Phone does not
support all Bluetooth OBEX profiles.
The following Bluetooth options are available:
On/Off
When the Bluetooth radio is turned on, you can use the Bluetooth features available.
When the Bluetooth radio is turned off, you cannot send or receive information via
Bluetooth. To save battery life or in situations where radio use is prohibited, such as
airline traveling, you can turn off the Bluetooth wireless technology.
1. In idle mode, press
highlight
2. Press 3 (
MENU key and use the right navigation key to
Settings & Tools and press
.
) Bluetooth Menu. The Bluetooth menus are listed in the
display.
3. Press the left soft key
Note: If Bluetooth is turned on, the
to turn Bluetooth On or Off.
Bluetooth icon displays in the top line of the display.
Search
This option searches for a recognized Bluetooth wireless technology device.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 3 (
) Bluetooth Menu. The Bluetooth menus are listed in the
display.
3. Add New Device is highlighted, press
twice.
Note: If you have NOT already activated Bluetooth on the phone, the message “TURN BLUETOOTH ON?”
displays. Highlight Yes to activate or No to exit and press
.
4. A list of found Bluetooth devices will be displayed. Use the Up and Down
navigation keys to highlight a Bluetooth device. Press
devices.
to pair the
Section 8: Changing Your Settings
78
5. Enter the passkey (0000 for most devices) and press
to pair with the
device you selected.
6. Select Yes to pair the devices. Once connected the Bluetooth Connected
icon
appears in the upper half of the display.
Bluetooth Settings
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 3 (
) Bluetooth Menu. The Bluetooth menus are listed in the
display.
3. Press the right soft key
Settings. The Bluetooth menu displays with
the following options:
• My Phone Name: allows you enter a customized name.
• Discovery Mode: allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Note: After selecting On, users have one minute to see your accessibilty. After which Discovery Mode will
automatically default back to off.
• My Phone Info: shows the handset information.
Sounds Settings
The Sounds menu provides the ability to access the following menus:
Master Volume
1. Locate the volume keys
located on the left side of the phone.
2. Use these keys to adjust the volume (High, Medium High, Medium, Medium
Low, Low, Vibrate Only, Alrm Only, All Sounds Off.)
3. Press the
Play soft key to hear a sample audio file played at the
currently selected Master Volume level.
4. Press
79
SET to save the new volume setting.
Call Sounds
Ringer Settings
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 2 (
) Call Sounds.
4. Press 1 (
) Call Ringtone.
• Call Ringtone: Get new ringtones from “Get It Now” (Get New App.) or choose
from pre-loaded ringtones. Get New Ringtones, can only be accessed in
Landscape Mode.
- or Press 2 (
5. Press
) Call Vibrate to turn Call Vibrate On or Off.
to save the setting.
Alert Sounds
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 3 (
) Alert Sounds. For the following options, you can set the
tone for the message alerts. You can also set vibration on and set a
reminder.
• TXT Message: allow you to set a notification for TXT message.
• Picture-Video Message: allow you to set a notification for Pic-Video message.
• Voicemail: allow you to set a notification for Voicemail Message.
• Device Connect: allow you to set a notification when you connect to a device.
Dial Sounds
Select the sound of the keypad when pressed.
1. In idle mode, press
MENU, use the navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 4 (
) Dial Sounds.
4. Use the navigation key to to select Default or Xylophone.
5. Press
to set the new dial sound.
Section 8: Changing Your Settings
80
Keypad Volume
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 5 (
) Keypad Volume.
4. Use the navigation key or volume key to adjust the keypad volume.
5. Press
SET to save.
Earpiece Volume
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 6 (
) Earpiece Volume.
4. Use the Up and Down navigation keys to adjust the keypad volume.
5. Press
SET to save.
Service Alerts
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 7 (
) Service Alerts. For the following options, you can turn
the Service Alert On or Off.
• ERI: Sounds an alert when you go into and out of your coverage areas.
• Minute Beep: While on a call your phone beeps after every minute of usage.
• Call Connect: Sounds an alert when a call is connected and when a call has
ended.
Power On/Off
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 4 (
) Sounds Settings. The Sounds Settings menus are listed
in the display.
3. Press 8 (
) Power On/Off. You can set the sounds for Power On and
Power Off to either On or Off.
81
Display Settings
The Display menu affects the menu style, idle mode animation, backlight settings,
and more.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
• Banner: Create your own personalized greeting that appears in the display when
your phone is in idle mode or choose the ERI Banner which displays the network in
which you have subscribed.
• Backlight: Choose settings for the LCD and/or Keypad.
• Contrast: Choose contrast settings for the Front Display.
• Wallpaper: Choose Pictures from My Pictures or Videos from My Videos to use as
the background display for your Main Screen. Choose Pictures from My Pictures
to use as the background display for your Front Screen.
• Display Themes: Choose from 5 preset colors used for menu display.
• Dial Fonts: Choose a dialing font style and size.
• Clock Format: Choose digital or analog format for time display.
3. Use the navigation key to highlight the display menu that you wish to edit,
then press
.
4. Use the navigation key to select an option and press
.
Banner
Banner allows you to create your own personalized greeting that appears in the
display while your phone is in idle mode. Or you can display the network to which
you are subscribed.
To create a personal banner:
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display. Press 1 (
) Banner.
3. Press 1 (
) Personal to create a customized banner for your
handset.
Note: Press and hold
to erase an existing banner, if necessary.
Section 8: Changing Your Settings
82
4. Enter a word or short phrase (18 characters or less) to appear in your
phone’s display when the phone is in idle mode and press
new banner.
to save the
To turn on an ERI banner:
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display. Press 1 (
) Banner.
3. Press 2 (
) to set the ERI Banner for your handset.
4. Select On or Off and press
.
Backlight
Set the backlight for the display or keypad to remain on for a specified period of
time or to remain on as long as the flip is open.
Note: Prolonged backlight use drains your battery faster.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 2 (
) Backlight. The menus listed appear in the display.
• Display: The following options are for the Main LCD.
• Duration: Can be set to 7 seconds, 15 seconds, 30 seconds, Always On, or
Always Off.
• Brightness: Use the navigation key or volume key to adjust the brightness.
• Keypad: The following options are for the keypad.
• 7 Seconds: The keypad is on for 7 seconds.
• 15 Seconds: The keypad is on for 15 seconds.
• 30 Seconds: The keypad is on for 30 seconds.
• Always On: The keypad is always on.
• Always Off: The keypad is always off.
4. Use the navigation key to highlight a menu.
5. Press
desired.
83
to enter the highlighted option’s menu and change settings as
Contrast
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 3 (
) Contrast.
4. Press the left navigation key for a darker setting or press the right navigtion
key for a lighter setting.
5. Press
.
Wallpaper
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 4 (
) Wallpaper.
4. Press 1 (
) Main Screen or 2 (
) Front Screen.
• Main Screen: Choose My Picture (allows you to select an image from the
My Picture folder.) or My Video (allows you to select a video from the My Video
folder.)
• Front Screen: Choose My Pictures (allows you to select an image from the My
Picture folder.)
5. Use the navigation key to highlight your selection, the press
to select
the wallpaper that will appear in the main or front LCD display while your
phone is in idle mode.
Display Themes
Choose from 5 preset themes used for the menu display.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 5 (
) Display Themes.
4. Use the navigation key to select an option and press
.
Section 8: Changing Your Settings
84
Dial Fonts
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 6 (
) Dial Fonts. Press 1 (
) Style or 2 (
) Size
and press
.
• Style: Choose Normal, Rainbow, Quill Pen, or Sticky.
• Size: Choose Normal or Large
4. Use the navigation keys to select a dialing font preference, then press
.
Clock Format
This menu allows you to have time displayed in digital or analog format.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 5 (
) Display Settings. The Display Settings menus are listed
in the display.
3. Press 7 (
) Clock Format. The Clock Format menus are listed in the
display.
4. Press 1 (
) Main Clock or 2 (
) Front Clock.
5. The following options appear in the display. Highlight one of the following
options and press
to save.
• Digital: Time appears in digital format, for example, 12:54pm.
• Analog: Time appears in clock format. Digital format is still present in the display.
• Off: No time is displayed.
Phone Settings
The Phone Settings menu provides the ability to access the following menus:
Standalone Mode
With Standalone Mode on, all RF functions for your phone are disabled, and you
cannot use your phone to place or receive calls.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 1 (
Off and press
85
) Standalone Mode. Use the navigation key to select On or
.
Set Shortcut Key
Shortcut Key allows you to select from up to 23 applications that appear in the
display when you press the left/right/up/down directional keys on the navigation key
in idle mode.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 2 (
) Set Shortcut Key.
4. Use the navigation key to select the directional key you want to change and
press
.
Note: Press 5 (
) Reset All to return to the navigation key defaults settings. For default settings see
"Navigation Key Shortcuts" on page 39
5. Select a menu item and press
.
Flip Duration
Flip Duration settings allows you to change the time interval for the Portrait to
Landscape mode. For example, when composing a message in Portrait mode, and
you want to change to Landscape mode, you can retain the previously entered text
depending on the setting selected, (3 or 6 seconds) by closing the handset and
reopening to Landscape mode.
Note: If not re-opened the message will be automatically saved to the draft folder.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 3 (
) Flip Duration.
4. Use the navigation key to select 3 Seconds or 6 Seconds and press
Section 8: Changing Your Settings
86
.
Language
Change the display language from English to Spanish or vice versa using the
Language menu.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 4 (
) Language.
4. Use the navigation key to select a language and press
.
Location
Note: This feature is only available on the Verizon Wireless network.
The Location (GPS) setting identifies your location to the network. You can fully
enable this setting or set GPS to work only in the case that you dial 911 from your
phone.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 5 (
) Location. The following options appear in the display:
• Location On: GPS location setting is on wherever the feature is available.
• E911 Only: GPS location setting is on whenever you dial 911 only.
4. Use the navigation key to highlight an option.
5. Press
to select the highlighted setting.
Security
The Security menu allows you to lock your phone, set restrictions, and other
security options.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
87
2. Press 6 (
) Phone Settings.
3. Press 6 (
) Security.
4. Enter the lock code (factory settings are the last four digits of your
telephone number). The following options appear in the display:
• Lock Mode: Allows you to lock the Device or Location.
• Edit Code: Allows you to change the Lock Code for the Device or Location.
• Reset Settings: All settings (except Contacts) are reset to factory default settings.
Lock Phone
Lock Phone restricts the use of your phone with the exception of outgoing calls to
911. Lock Phone allows you to answer calls, but to place calls (except to emergency
numbers) you have to unlock the phone.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 (
) Security. You’re prompted to enter the lock code. The
default lock code is the last four digits of your telephone number.
4. Enter the Lock Code. Several security menus appear in the display.
5. Press 1 (
) Lock Mode. Use the navigation key to highlight Device.
Press
. The following options display:
• Lock: Your phone returns to idle mode. The the Lock Code is required immediately
to access any functions.
• Unlock: If locked, unlocks the device or phone, depending on your selection.
• On Power Up: The Lock Code is required whenever you power up the phone.
6. Use the navigation key to select an option and press
.
Lock Location
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 (
) Security. You’re prompted to enter the lock code. The
default lock code is the last four digits of your telephone number.
4. Enter the Lock Code. Several security menus appear in the display.
5. Press 1 (
) Lock Mode. Use the navigation key to highlight
Location. Press
. The following options display:
• Lock: Your phone returns to idle mode. The the Lock Code is required immediately
to access any functions.
• Unlock: If locked, unlocks the device or phone, depending on your selection.
6. Use the navigation key to select an option and press
.
Section 8: Changing Your Settings
88
Edit Lock Code
The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 (
) Security. You’re prompted to enter the lock code. The
default lock code is the last four digits of your telephone number.
4. Press 2 (
) Edit Code.
5. At the “ENTER NEW LOCK CODE” prompt, enter the new lock code.
6. You’re prompted to confirm the new lock code.
7. At the “CONFIRM LOCK CODE” prompt, re-enter lock code.
8. “DEVICE CODE SET” message appears in the display confirming that your
lock code has been changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Resetting Your Phone
Reset Settings returns all setup options to their factory default.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 6 (
) Security, and enter the lock code.
4. Press 3 (
) Reset Settings. A prompt appears in the display asking if
you wish to restore default settings (except for the Contacts).
5. Press Yes to restore default settings or press No to return to the Security
list.
89
Call Emergency Numbers in Lock Mode
In Lock Mode, you can dial 911 to place an emergency call.
Note: If you dial 911, your phone dials the emergency number immediately (no prompt).
System Select
The System Select menu allows you to set your roaming options. For information on
roaming options, see "Roaming Options" on page 29.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 7 (
) System Select. The following options appear in the
display:
• Home Only
• Automatic
4. Make your selection and press
.
NAM Selection
Your phone provides the option of selecting between two NAMs (Number Assignment
Modules) or phone numbers. Select either NAM1 or NAM2.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 8 (
) NAM Selection. The following options appear in the
display:
• NAM1
• NAM2
4. Make your selection and press
.
Quick Search
Quick Search is an easy way to locate contacts in your Address Book and Menu
items.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
Section 8: Changing Your Settings
90
2. Press 6 (
) Phone Settings. The Phone Settings menus are listed in
the display.
3. Press 9 (
) Quick Search.
4. Press the right soft key
Info to display detail information about Quick
Search.
5. Select On or Off and press
.
Searching for a Contact
1. In idle mode, press the first three numeric keys that correspond to the
letters of the contacts name.
For example, to search for “Sally” you would enter
S
A
L
L
Y
2. Press the Up navigation key. The contact name is highlighted.
3. Press the
key to call the contact.
Searching for a Menu Item
1. In idle mode, press the first three numeric keys that correspond to the
letters of the Menu item name.
For example, to search for “Inbox” you would enter
I
N
B
O
X
2. Press the Down navigation key. The menu item is highlighted.
3. Press the
key to access the content of the menu item.
Call Settings
The Call Settings menu allows you to select the method for answering incoming
calls, setting redial options, setting data rates for data calls, voice privacy, and more.
91
Answer Options
The Answer Options menu allows you to select the method for answering incoming
calls.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
) Call Settings. The Call Settings menus are listed in the
display.
3. Press 1 (
) Answer Options. The following options appear in the
display:
• Flip Open: Calls are answered when the flip is opened.
• Any Key: Calls are answered when any key (other than
) is pressed.
• Send Only: Calls are answered only when the
key is pressed.
• Auto Answer: Calls are answered automatically with a 1, 3 or 5 second delay.
4. Use the navigation key to highlight the method you wish to use for
answering calls, then press
.
Auto Retry
Auto Retry automatically redials busy numbers after a preset period of time.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
) Call Settings. The Call Settings menus are listed in the
display.
3. Press 2 (
) Auto Retry. The following options appear in the display:
• Off
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
4. Use the navigation key to select an option and press
.
TTY Mode
Before you can use your phone with a TTY device, you’ll need to enable TTY
functions in the phone. See "TTY" on page 30 for more information.
One Touch Dial
You can use this option to enable or disable the speed dialing feature.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
1. Press 7 (
) Call Settings. The Call Settings menus are listed in the
Section 8: Changing Your Settings
92
display.
2. Press 4 (
) One Touch Dial. Select On or Off and press
.
See "Speed Dialing" on page 57 for more information.
Voice Privacy
Note: This feature is only available on the Verizon Wireless network.
Voice Privacy (at the Enhanced setting) allows you to prevent those you call from
seeing your number in their display when receiving your call. Voice privacy options
are Standard and Enhanced.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
) Call Settings. The Call Settings menus are listed in the
display.
3. Press 5 (
) Voice Privacy. The following options appear in the
diplay:
• Standard
• Enhanced
4. Use the navigation key to select an option and press
.
Call Restrictions
Call Restriction allows you to restrict outgoing and incoming calls. You can also
restrict access to your Contacts list.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
) Call Settings. The Call Settings menus are listed in the
display.
3. Press 6 (
) Call Restrictions.
4. Use the navigation key to select Outgoing, Incoming, or Contacts, then
press .
5. Use the navigation key to select On or Off, then press
.
Data Settings
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
display.
93
) Call Settings. The Call Settings menus are listed in the
3. Press 7 (
) Data Settings. The following options appear in the
display:
• Data Off: Phone operates in normal voice call mode.
• Data For Next Call: Data call is enabled for next call only. Phone will reset to
Data Off mode after call.
• Data Until Powered Off: Phone will remain in Data Mode until phone is
powered off.
4. Use the navigation key to select an option and press
.
DTMF Tones
Use this menu to set DTMF settings to Normal, or Long.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 7 (
) Call Settings. The Call Settings menus are listed in the
display.
3. Press 8 (
) DTMF Tones. The following options appear in the display:
• Normal: Select for a normal tone.
• Long: Select for an extended tone.
4. Use the navigation key to select an option and press
.
Memory
The Memory menu allows you to manage your Save Options (for Pictures, Videos,
and Sounds) on your Phone Memory or Card Memory. You can also set the
memory usage for pictures, videos, music, sounds, and ringtones on your phone and
microSD™ card.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 8 (
) Memory. The Memory menus are listed in the display.
The following options are available:
• Save Options: You can set your Pictures, Videos, and Sounds to be saved to
either phone memory or card memory.
• Phone Memory: Allows you to see the memory usage for everything stored on
your phone. The following options are available:
• Phone Memory Usage: Displays the current memory usage and allocation figures
for the various applications and folders stored on the phone. These include: Total
Used, Available, My Pictures, My Videos, Ringtones, My Music, My Sounds,
Applications, and Picture/Video Msg.
• My Pictures: Pictures you have saved from a Picture message, downloaded via
the “Get It Now” application, or taken using your phone.
Section 8: Changing Your Settings
94
• My Videos: Video Clips you have saved from a Video message, downloaded via
the “Get It Now” application, or taken using your phone.
• My Ringtones: Ringtones you have downloaded via the “Get It Now” application.
• My Music: Music you have downloaded directly from the V CAST Music catalog or
music you have transferred from your PC using Sync Music.
• My Sounds: Sounds you have recorded using your phone or saved from a Picture
message with Sound attached.
Note: Your phone does not come with the microSD™ memory card and must be purchased as an
accessory. See your service provider for more information.
• Card Memory: Allows you to see memory usage of everything stored on your
microSD™ card. The following file options are available for the removable
microSD™ memory card:
• Memory Usage: Displays the current memory usage and allocation figures for the
various applications and folders stored on the card. These include: Total Used,
Available, My Pictures, My Videos, Ringtones, My Music, My Sounds,
Applications, and Picture/Video Msg.
• My Pictures: Pictures you have saved from a Picture message or taken using your
phone.
• My Videos: Video Clips you have saved from a Video message or taken using your
phone.
• My Music: Music you have downloaded directly from the V CAST Music catalog or
music you have transferred from your PC using Sync Music.
• My Sounds: Sounds you have recorded using your phone or saved from a Picture
message with Sound attached.
Phone Info
The Phone Info menu allows you to view the software and hardware information,
your assigned number, and an icon glossary for your phone.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools and press
.
2. Press 9 (
) Phone Info.
3. My Number is highlighted. Press 1 (
) My Number to display the
Mobile Device and Identification numbers.
4. Press 2 (
) SW Version to view the software, PRL, ERI, Browser, Get
it Now, and Hardware versions available on your phone.
5. Press 3 (
) Icon Glossary to view the list of icons with a brief
description.
6. Press
to return to the Phone Info menu.
95
Section 9: Multimedia
Topics Covered
• Get It Now
• Music & Tones
• Picture & Video
• Games
• News & Info
• Tools on the Go
• Extras
The topics covered in this section are audio and video, graphics, voice command,
games, calendar, schedule events, set an alarm, and perform simple math
calculations.
Note: This feature is only available for use while the phone is in a lanscape orientation. See "Section 2:
Understanding Your Phone" on page 8 for more information on setting your phone to landscape mode.
Get It Now
The Get It Now menu provides sub-menus to Music & Tones, Picture & Video,
Games, News & Info, Tools on the Go and Extras. You can also view memory info to
see how much space you’ve used (and have left) for stored media. Use the following
steps for each GET IT NOW sub-menu.
1. Open your handset in Landscape mode.
2. Access the GET IT NOW menu by pressing the right navigation key while in
idle mode.
3. Press the right soft key
Info.
4. Press 1 (
) App. Memory to display the memory available. Press the
key to return.
Section 9: Multimedia
96
5. Press 2 (
) Content Memory to view the memory used for the
following items. Press the
key to return.
• My Ringtones
• My Music
• My Sounds
• My Pictures
• My Videos
• Applications
• Picture-Video Msg
6. Press 3 (
) View Log to see the file transfer activity.
7. Press the
key to return.
8. Press 4 (
) Help to display a list of frequently asked questions. Use
the navigation key to highlight an item and press
to display help text.
9. Press the
key to return.
Music & Tones
This menu allows you to get new tunes and tones, record new sounds, and set tunes
and tones as your ringtone. It also allows you to access your music files.
V CAST Music
You can use the V CAST Music option to download music from the V CAST Music
catalog directly to phone memory or to a removable memory card*. Before
downloading music to your microSD™ memory card, be sure to format it as
described below.
Formatting microSD™ Card using your PC
For best playback of songs stored to the microSD™ memory card, you should
reformat your memory card with PC format FAT32.
Note: Any contents currently stored on the microSD™ memory card will be lost after this procedure is
performed.
*Memory Card sold seperately.
1. Insert the microSD™ memory card into an SD card adapter.
2. Insert the SD card adapter into the SD card reader slot.
3. Plug the SD card reader into a USB port on your PC.
4. On your PC, go to your My Computer directory and highlight the drive that
represents the SD card reader.
5. Right click and select the Format option.
97
6. Under the File System option, select FAT32 and click the Start button.
7. Your microSD™ memory card will be reformatted.
8. Remove the microSD™ card from the SD card reader and insert it back into
your phone. The My Music directory will automatically be created on the
microSD™ memory card the first time you insert it into the phone.
Formatting microSD™ Card using your u740
1. Open your u740 in Landscape mode.
2. In idle mode, press the
Settings & Tools and press
MENU, use the navigation key to highlight
.
3. Press 8 (
) Memory.
4. Press 3 (
) Card Memory.
5. Press the right soft key
Options.
6. The Format Card option is highlighted. Press
7. Highlight Yes and press
.
to format microSD™ card.
Downloading Music from the V CAST Music Catalog
1. Open your handset in Landscape mode.
2. In idle mode, press the
Get It Now and press
press
.
3. Press 1 (
MENU, use the navigation key to highlight
. The Music & Tones menu is highlighted,
) V CAST Music to open the V CAST Music catalog.
4. Browse or search the catalog to preview the songs you want.
5. Highlight the music (song or album) that you want to purchase. Press
BUY to purchase.
6. The CONFIRM PURCHASE screen will display the price and items you
selected to purchase. Press
BUY to accept the terms.
7. You’ll receive confirmation that your purchase was successful and your
music is available for download. Press
to continue.
8. Highlight Phone Memory or Memory Card for storage location (Memory
Card is recommended). Press
to begin downloading. Wait for the
phone to acquire the content license. Press
when download is
complete.
9. Press the right soft key
Play to play the downloaded song immediately.
Or, You can press the left soft key
downloaded songs and albums.
10. To return to idle mode, press the
Library to go to your Music Library of
key.
Section 9: Multimedia
98
Get New Ringtones
You can use this option to download new ringtones from the Internet.
1. Open your handset in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
. The Music & Tones menu is highlighted,
press
.
3. Press 2 (
) Get New Ringtones.
4. Press 1 (
) Get New App.
5. You are connected to the web server and presented with available provider
ringtone applications.
6. To return to idle mode, press the
key.
My Ringtones
1. Open your handset in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW. The Music & Tones menu is highlighted, press
.
3. Press 3 (
) My Ringtones.
4. Press 1 (
) Get New Ringtones to access the web to download new
ringtones. Or if you have already downloaded ringtones, highlight your
selection and press
.
5. To return to idle mode, press the
key.
My Music
The Music Player can be used to play music files that you have downloaded from the
V CAST Music catalog or that you have transferred from your PC using Sync Music.
You can play your music with the flip open or closed.
99
Playing Music with the Flip Closed
The external keys which you will use are labeled below.
Rewind Key
Fast Forward Key
Play/Pause Key
Note: The music player keys are only functional when the backlight is active. Press and hold the Volume
key on the left side of the phone or the Speakerphone key on the right to activate the backlight. To lock the
touch sensative keys, press
on the left side of the phone
1. In idle mode, with your flip closed, press and hold the Play/Pause (
)
key. If you have already downloaded music to your phone or memory card,
Play Music? Y:
N:
appears in the display.
Note: To create a playlist, see ‘Creating a Playlist” on page 102 for more information.
2. Press the Play/Pause (
Forward (
) key to play the songs or press the Fast
) key to elect not to play music.
3. You can use the Fast Forward (
) and Rewind (
another song track. Press and hold the Fast Forward (
(
) keys to forward or rewind the current song.
) keys to skip to
) and Rewind
Playing Music with the Flip Open
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
. The Music & Tones menu is highlighted,
press
.
3. Press 4 (
) My Music.
Section 9: Multimedia 100
4. The Music Library screen appears in the display. The following options
appear in the display:
• Genres: This option organizes your songs by music type (genre). For example,
Folk, Rock, Country, Classical, Soul, Unknown and so on. Each folder will contain
all songs within that genre.
• Artists: This option organizes your songs by artist.
• Albums: This option organizes your songs by album title. Even if you only have one
song from an album, a folder for the album will display.
• Songs: This option organizes your songs by song title. To add a song to a playlist,
press the right soft key
Options and select Add to playlist to place the song
into one of your playlists.
• Playlists: Any playlists that you have created are displayed in this option. Press the
right soft key
Create to create a new playlist. With a playlist highlighted,
press the right soft key
Options to play, edit, rename, or erase the playlist, or
to create a new playlist.
• Inbox: This repository is where alert notifications are received when new music
from a selected artist is available for download.
• Play All: This option will play all of your songs in list order.
• Shuffle: This option will re-sort a playlist order.
5. You can press the left soft key
Catalog to go to the V CAST Music
catalog.
6. Use the navigation key to select Songs and press
press 4 (
or
) Songs
7. Scroll down to a song and press the right soft key
Options, to select
from the following options:
• Add to playlist: Add song to playlist.
• Move song: Moves the images from the microSD™ card to the phone and from
the phone to the microSD™ card. Displays when microSD™ card is inserted.
• Erase song: Erases the selected file.
• Song Info: Displays Title, Artist, Album, Genre, Copyright, Length, Size, Bit Rate
and Date.
• Reinitialize library database: refreshes library database.
8. Press the up/down navigation keys to highlight the song you want to listen
to and press
PLAY to play the song.
9. During song playback, press the right soft key
Options to switch to one
of the following functions:
• Play All: Selects all songs for playback.
• Shuffle: Re-sorts the current playlist order.
• Get V CAST Music: Connects you to the V CAST Music catalog to download more
songs.
101
• Buy music by (Artist Name): Allows you to buy music of the artist currently
playing.
10. During song playback, press the right navigation key to advance to the next
song track in the current playlist, or press the left navigation key to skip to
the previous song track.
Creating a Playlist
1. Open your handset in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
. The Music & Tones menu is highlighted,
press
.
3. Press 4 (
) My Music.
4. Press 5 (
) Playlists.
5. If playlist(s) already exist on the phone, press the right soft key
Options.
6. Press 4 (
) Create playlist.
7. Enter a title for the playlist in the text box and press
.
8. Press the
key to return to the Music Library menu. You can select
songs to add to the playlist by browsing through Genres, Artists, Albums, or
Songs in the Manage Music library.
9. Highlight a song, press the right soft key
Options and press 1 (
Add to playlist. Highlight the appropriate playlist and press
Add.
10. To return to idle mode, press the
)
key.
Editing a Playlist
1. Open your handset in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
. The Music & Tones menu is highlighted,
press
.
3. Press 4 (
) My Music.
4. Press 5 (
) Playlists.
5. Highlight the playlist you would like to edit and press the right soft key
Options. Highlight 2 (
) Edit playlist and press
.
6. To remove a song from the playlist, highlight the song and press the right
soft key
Remove.
Section 9: Multimedia 102
7. To change the order of the songs in your playlist, highlight a song and press
Move. Then use the Up or Down navigation keys to move the song up
or down in the playlist order. When you are finished, press
Save.
8. To return to idle mode, press the
key.
My Sounds
1. Open your handset in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
3. The Music & Tones menu is highlighted, press
4. Press 5 (
5. Record New is highlighted. Press
6. Press
soft key
7. Press
.
) My Sounds.
to launch the RECORD NEW screen.
REC to begin recording. Press
STOP to stop. Press the left
Pause to pause and resume the recording appropriately.
to save sound.
Sync Music
This option allows you to transfer music files from your PC. In order to use this
option, you must load Windows MediaTM Player 10 on your PC. Windows MediaTM
Player 10 is only compatible with Windows XP® operating systems.
For setup of Windows MediaTM Player 10, refer to the following resources:
• To download the Windows MediaTM Player 10:
http://www.microsoft.com/windows/windowsmedia/mp10/default.aspx
• Tips on getting started:
http://www.microsoft.com/windows/windowsmedia/mp10/usingplayer.aspx
• Common questions:
http://www.microsoft.com/windows/windowsmedia/mp10/troubleshooting.aspx
• Troubleshooting error messages:
http://www.microsoft.com/windows/windowsmedia/mp10/errors.aspx
Note: The file name is limited to 36.3 characters (thirty-six to left of “.”, three to right of “.”)
Only songs with English or Spanish filenames can be successfully transferred to the phone for play back.
Note: Before transferring files, be sure to format your microSDTM memory card with PC format FAT32. See
‘Formatting microSD™ Card using your PC” on page 97 for more information.
1. Plug in the USB cable (sold separately) to your phone and connect it to a
USB port on your PC.
103
2. Open your handset in Landscape mode.
3. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
. The Music & Tones menu is highlighted,
press
.
4. Press 6 (
) Sync Music.
5. Your phone should display the message, Connected.
6. Open Windows Media Player 10 on your PC and select the SYNC option.
7. The left-hand side of the Windows Media Player will display the files on
your PC. Check the songs you want to download.
8. On the right-hand side of the Windows Media Player, select whether you
want to download the music to Removable storage card or Phone
internal memory.
9. Press the Start Sync button on the upper left-hand side of the Windows
Media Player.
10. A Synchronization Complete message will appear on the phone when
downloading is complete.
11. Disconnect the USB cable (sold separately).
12. To return to idle mode, press the
key.
Picture & Video
This menu allows you to get new Pictures and Videos via a wireless Internet
connection (Mobile Web) or take new Pictures or Videos using your phone’s camera.
You can also view the saved pictures.
V CAST Video
V CAST, the next generation wireless technology that unveils a whole new
multimedia experience at your fingertips, provides access to vibrant, full-color
content from some of the biggest names in entertainment. V CAST is your link to
video on demand, which allows you to view or download video clips that contain
breaking news, sports highlights, weather and more.
For additional information regarding V CAST Videos and its use, see
www.verizonwireless.com.
Note: To access and download videos, you must have the
icon displayed.
Section 9: Multimedia 104
Browsing, Selecting and Playing Video Clips
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
3. Press 2 (
) Picture & Video.
4. The V CAST Videos option is highlighted. Press
.
5. Use the navigation keys to highlight the V CAST Videos category you want.
6. After choosing the category you want press
. Choose a sub category, if
applicable, by using the navigation keys or by entering the short-cut key
number and press
.
7. Use the navigation key to highlight a video. You may press the right soft key
Options to read the description of the video clip.
8. To view the highlighted video, press
VIEW.
9. Highlight Yes to accept charges, if applicable, and then press
. After
connection and buffering occurs, the video clip begins.
Downloading a Video Clip
1. Open your u740 in Landscape mode.
2. Launch V CAST Videos and select a video you want to save. For
information about launching your video player and choosing a video clip,
review steps 1-5 of the previous section, “Browsing, Selecting and Playing
Video Clips” above.
3. To download and save the highlighted video, press
SAVE. The video
clip will be saved to My Video.
4. Highlight Yes to accept charges, if applicable, and then press
. The
video download begins.
5. Once the download is completed, “Download Complete. Play video
now?” appears in the display.
6. Select Yes and press
to view the video, or select No to return to the
V CAST Videos menu.
Note: Not all video content available can be downloaded to your phone; however, all content is available for
viewing.
105
Deleting Video Clips
1. Open your u740 in Landscape mode.
2. Launch V CAST Videos.
3. Press the right soft key
4. Press
Options. My Clips is highlighted.
. The clips you have downloaded are listed.
5. Use the navigation key to highlight the video you want to erase and press
the right soft key
6. Press
press
Options. Erase is highlighted.
. Highlight Yes when the confirmation screen displays, then
.
Configure Alerts for New Video Clips
1. Open your u740 in Landscape mode.
2. Launch V CAST Videos.
3. Use the right and left navigation keys to select the V CAST Videos
categories you want to configure an alert.
4. Choose a sub category if applicable, then press the right soft key
Options.
5. Highlight Alerts and press
.
6. Highlight Configure alerts and press
.
7. Select the alert content you want, and press
.
8. After reading terms, highlight Save to accept and press
Cancel to decline and press
, or highlight
.
Note: Fees apply for text messages/alerts both sent and received.
Get New Pictures
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
3. Press 2 (
) Picture & Video.
4. Press 2 (
) Get New Pictures.
5. Press 1 (
) Get New App. You are connected to the internet. Follow
the on-screen prompts.
Section 9: Multimedia 106
My Pictures
My Pictures allows you to review the pictures taken with the camera feature or
downloaded and stored into your phone and/or microSD TM card
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
3. Press 2 (
) Picture & Video.
4. Press 3 (
) My Pictures.
5. Use the navigation key to select a photo, and press
VIEW to view
the highlighted picture. Press the right soft key
Options to select from
the following options:
• Send: Launches the Create Picture-Video Message screen.
• Set As: Set the picture as the Main Wallpaper, or Picture ID.
• To PIX Place: Transfers the file to the online gallery.
• Take Pictures: Activates the camera.
• Get New Pictures: Launches the internet to get online pictures.
• Create Postcard: Adds text to a picture selected from the PIX Gallery.
• Edit: Allows you to edit the image.
• Slide Show: Allows you to view in a series of pictures.
• Rename: Allows you to rename the picture.
• Move: Moves the images from the microSD™ card to the phone and from the
phone to the microSD™ card.
• Lock/UnLock: Locks/unlock the picture to prevent deletion.
• Erase All: Erases all pictures from the gallery exept the locked images.
• File Info: Provides the date, time, resolution, size and rights to the selected picture.
6. Use the navigation key to make your selection and press
.
My Videos
My Videos allows you to review videos taken with the camcorder feature or
downloaded and stored into your phone and/or microSD TM card. Video clips you
save are stored in My Videos. You can access video clips without launching the
V CAST Videos application and delete your saved video clips directly.
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
107
3. Press 2 (
) Picture & Video.
4. Press 4 (
) My Videos.
5. Use the navigation key to select a video, and press
PLAY to play the
highlighted video.
6. Press the left soft key
Erase to erase the selected video.
7. Press the right soft key
Options to select from the following options:
• Send: Launches the Create Picture-Video Message screen.
• Record Videos: Activates the camcorder.
• To PIX Place: Transfers the file to the online gallery.
• V Cast Videos: Launches the internet to get online videos. You can only access
this feature in Landscape mode.
• Set As Wallpaper: Sets the selected video as wallpaper for the main display.
• Rename: Allows you to rename the video.
• Lock/Lock: Secures/Unsecures the video to prevent deletion.
• Erase All: Erases all videos from the gallery exept the locked images.
• File Info: Provides the Name, Date, Time, Duration and Size of the selected video.
8. Use the navigation key to make your selection and press
.
PIX Place
Sends pictures to your online album.
Note: You must first setup your account on the Verizon Wireless website: www.verizonwireless.com before
establishing a connection.
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the left navigation key to highlight
GET IT NOW and press
.
3. Press 2 (
) Picture & Video.
4. Press 5 (
) PIX Place. The PIX Place sign-on screen displays.
5. Enter your Mobile Number and Password. Use the navigation key to
highlight LOGIN and press
album.
. You are now connected to your online
Take Pictures
This menu launches the camera.
1. Open your u740 in Landscape mode.
Tip: Alternatively to launch the camera, press
. Press and hold
to launch camcorder.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
.
Section 9: Multimedia 108
3. Press 2 (
) Picture & Video.
4. Press 6 (
) Take Pictures. The camera is now active.
5. Press the right soft key
Options, to choose the specific camera
settings. Use the right/left navigation keys to advance to each setting
category, and the up/down navigation keys to make selections within each
category. The following categories are available:
Settings: Allows you to customize your image settings.
• Color Effects: Normal, Black & White, Sepia, Antique, Negative, Green, Aqua,
Cool, Warm, Sketch
• White Balance: Auto, Sunny, Cloudy, Tungsten, Fluorescent, Manual
• Metering: Average, Center, Spot
• Memory: Allows you to select the location for saved pictures and videos. Save to
phone or microSD™ card.
• Auto Save: Turn Auto Save Off or On
• Icon Display: Allows you to hide or view the camera icons in the display. Select
Display All, Partial, Guideline, No Icons
• Ready Sound: The sound you hear before you capture the image. Select Off,
Say Cheese!, Look here, 1,2,3,!
• Shutter Sound: Allows you to select a shutter sound. Select Off, Shutter, OK,
DingDong
• Reset Settings: Return camera options to default settings.
Flash: Off, Always On, Auto, Only This Shot
Self Timer: Off, 2 Sec., 5 Sec., 10 Sec.
Quality: Economy, Normal, Fine
Resolution: (1280X960), (640X480), (320X240), (160X120) and
Picture ID
Multi Shot: Series Shot, Divided Shot, Auto/Manual
Camcorder: Switches from Camera to Camcorder
6. Press
TAKE to capture a picture. Press the right soft key
Erase to
delete it or press the left soft key
Save. The picture is now saved to the
gallery.
7. To exit the camera, press the
109
key.
Record Video
This menu launches the camcorder.
1. Open your handset in Landscape mode.
Tip: Alternatively to launch the camera, press
2. In idle mode, press
GET IT NOW and press
. Press and hold
to launch camcorder.
MENU, use the left navigation key to highlight
.
3. Press 2 (
) Picture & Video.
4. Press 7 (
) Record Videos. The camcorder is now active.
5. Press the right soft key
Options, to choose the specific video settings.
Use the right/left navigation keys to advance to each setting category, and
the up/down navigation keys to make selections within each category. The
following categories are available:
Settings: Allows you to customize your image settings.
• Color Effects: Normal, Black & White, Sepia, Antique, Negative, Green, Aqua,
Cool, Warm
• White Balance: Auto, Sunny, Cloudy, Tungsten, Fluorescent, Manual
• Memory: Allows you to select the location for saved pictures and videos. Save
to phone or microSD™ card.
• Auto Save: Set to automatically save files to a dedicated location. Select Off or
On
• Icon Display: Allows you to hide or view the camera icons in the display when
taking a photo. Select Display All, Partial, No Icons
• Start Sound: Set the start sound you will hear when you capture a video. Select
Off, Look here, 1,2,3!
• End Sound: Set the end sound you will hear when you finished capturing a
video. Select Off, OK, Melody
• Reset Settings: Return camera options to default settings.
Recording Mode: Limit for MMS, Normal
• MMS (Multimedia Messages) are limited to 15 seconds. Normal
recording is limited by the available memory on the target medium
(phone or card).
Flash: Off, Always On, Auto
Timer: Off, 2 Sec., 5 Sec., 10 Sec.
Quality: Economy, Normal, Fine
Section 9: Multimedia 110
Camera: Switches from Camcorder to Camera
6. Press
to save the settings.
7. Press
REC to begin recording. Press the left soft key
Pause or
STOP.
8. Press the right soft key
Erase or the left soft key
9. To exit the camcorder, press the
Save.
key.
Note: If you receive an incoming call while using your camcorder, the video recording is stopped. You will
be presented with the call Ignore / Accept screen. If you ignore the call, then you are given the choice to
Save, Send or Erase the video. If you accept the call, then your video is auto-saved and the camcorder
application exits in the background.
Note: If the battery level becomes too low while you are recording, the recording is stopped and the video is
auto-saved. The low battery indicator will be displayed and you will exit from the camcorder application. If
your battery is too low then the phone will power down without saving the video.
Note: If you receive a text message, a multi-media message or a voice mail while you are recording, the
video recording is stopped. You are given the choice to View Now or View Later. If you choose later, you are
given the chance to Save, Send or Erase the video. If you want to view the message now, the video is autosaved and the camera application exits in the background.
Games
Select from several fun and interesting applications or a broad category of games
that you can play on your phone.
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
.
3. Press 3 (
) Games.
4. Press 1 (
) Get New App.
5. Use the navigation keys to make a selection and press
.
6. Choose the charge Either Subscription or Unlimited, then press
in screen prompts to apply.
111
. Follow
News & Info
1. Open your u740 in Landscape mode.
Tip: Alternatively to launch the Verizon Wireless Mobile Web, press the Up arrow navigation key.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
.
3. Press 4 (
) Get News & Info.
4. The browser is launched and a pop up screen with available applications is
displayed.
5. Use the navigation key to browse the categories.
6. Once the desired category is highlighted, press
to enter the category
list.
When you use Get News & Info, some of the keys operate differently than during a
normal phone call.
It presents on-screen items in any of the following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can utilize the options or links by using the soft keys.
Tools on the Go
Download applications that keep you in touch with the world, keep you organized,
and help you find the coolest spots.
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
.
3. Press 5 (
) Tools on the Go.
4. Get New App. is highlighted. Press
.
5. Highlight the application you wish to download and press
6. Follow on screen subscription prompts and press
.
. The download
process begins.
7. At the “App installed successfully. Would you like to run it?” prompt, press
Yes to launch application, or No to return to category list.
Section 9: Multimedia 112
Note: The Tools on the Go menu will display all downloaded applications, with the most current download
first.
Extras
Extras is paid application which, after installation, acts as a backup assistant for
your Address Book. Get Extras saves your address book entries to a database to
protect them in the event that your phone is damaged and allows them to be
retrieved at a later date.
1. Open your u740 in Landscape mode.
2. In idle mode, press
MENU, use the navigation key to highlight
GET IT NOW and press
.
3. Press 6 (
) Extras.
4. Get New App. is highlighted.
5. Press
.
6. Highlight the application you wish to download and press
7. Follow on screen subscription prompts and press
.
. The download
process begins.
8. At the “App installed successfully. Would you like to run it?” prompt, press
Yes to launch application, or No to return to category list.
113
Section 10: Tools
Topics Covered
• Voice Commands
• Calculator
• Calendar
• Alarm Clock
• World Clock
• Stop Watch
• Notepad
The topics covered in this section allow you to schedule appointments, view the
calendar, set an alarm, view time zones, take notes, and perform simple math
calculations
Voice Commands
For more information see, "VoiceSignal™" on page 30.
Calculator
You can perform calculations, including addition, subtraction, multiplication and
division using your phone.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 2 (
Calculator opens.
) Calculator, 1 (
) Normal. The
3. Enter the first number in your equation using the keypad. (Numbers can be
up to nine digits long.)
4. Press the right soft key
Operator to display a pop-up menu which
allows you to enter a Parenthesis or Power if desired. Press the left soft key
Clear or
to clear all data entered.
5. Press # (
6. Press the * (
) to change the sign for a number to a negative.
) to add a decimal point.
Section 10: Tools 114
7. Use the navigation keys to set the type of calculation that you wish to
perform. Your choices are as follows:
• Up key: [+] Addition
• Down key: [-] Subtraction
• Right key: [x] Multiplication
• Left key: [÷] Division
8. Use the keypad to enter the second number into your equation.
9. Press
to perform the calculation and view the result.
Tip
Calculates the tip and determine how much each person should pay for the meal.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 2 (
Calculator opens.
) Calculator, 2 (
) Tip. The Tip
3. Populate the following fields:
• Bill: enter the amount of the bill.
• Tip: enter the tip percentage.
• # Paying: enter the amount of people paying.
Note: Press the * (
) key to enter a decimal point.
4. The tip is automatically calculated in the section below.
Converter
The Conversion menu provides the following conversion categories:
• Temperature
• Length
• Weight
• Area
• Volume
• Currency
To convert any of the above categories, do the following:
1. Scroll to the conversion feature you wish to use and press the
key.
2. Use the Left or Right navigation keys to select the From units of money or
measure for the quantity you want converted.
3. Enter the quantity you want converted in the text box.
115
Note: Press the * (
) key to enter a decimal point.
Use the Left or Right navigation keys to select the To units of money or measure for
the quantity you want converted.
Calendar
Schedule up to eight events for any day by indicating each event’s start and end
time. Set alarms for events so that you can be alerted before an event takes place.
Events scheduled for future dates automatically appear on your Today events
schedule for the present day.
Add a new event
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 3 (
) Calendar. The calendar appears in the
display with the current date highlighted.
3. To view available options, press the right soft key
Options. A pop-up
menu appears in the display that contains the menu items.
• Weekly: View the current week.
• Go To Date: Go to any date that you specify.
• Go to Today: View today’s events.
• Erase Old: Select a past event to delete.
• Erase All: Delete all events in your calendar
4. Press the left soft key
Add to add a new event.
5. The Appointment name field is highlighted. Enter the name and use the
down navigation key to move to the following fields:
• Start Date: Enter the start date for the event.
• End Date: Enter the end date for the event.
• Start Time: Enter the start time for the event.
• am/pm: Select from am or pm for the start time.
• End Time: Enter the end time for the event.
• am/pm: Select from am or pm for the end time.
• Recurrence: Select the frequency of the event.
• Alert: Sets the alarm for the event. Select from Tone, Vibrate, or Light Only.
• Reminder: Set a reminder up to one day before the event.
• Alert Time: Set the Alert Time to sound before the event takes place.
Section 10: Tools 116
6. Fill in and select event details using the navigation keys and the alpha-
numeric keypad.
7. Press
. The event is saved.
View an event
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tool and press
.
2. Press 2 (
) Tools, 3 (
) Calendar.
3. A calendar appears in the display with the current date highlighted.
4. Use the navigation keys to highlight the date containing the event that you
wish to view. Press the right soft key
Options.
Tip: Use the volume key to move between months in the calendar.
5. In the pop-up menu that appears in the display, use the navigation key to
highlight Go To Date, then press
.
6. Enter the desired date in the box, then press
. The month that you
entered appears in the display with the event date highlighted.
7. Press
VIEW to view event details for the date.
8. To edit the event, press the left soft key
press
Edit. Make changes, then
SAVE.
9. Press the right soft key
Options. A pop-up menu appears in the
display.
10. To erase the current event, press 3 (
appears with Yes highlighted. press
) Erase. A pop-up menu
to erase, or highlight No to cancel.
11. To see the selected date in a month view, press 1 (
12. To see the selected date in a week view, press 2 (
117
) Monthly.
) Weekly.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or recur daily at a
specific time. Once set, the alarm clock is easy to change or turn off.
Set An Alarm
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 4 (
) Alarm Clock. The Alarm Clock menu
displays with the Alarm 1 highlighted.
3. The following options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
4. Use the navigation key to highlight the alarm that you wish to enable, then
press
. The Set Alarm (1, 2, or 3 depending on your selection) screen
appears in the display.
5. The Alarm field is highlighted. Use the left/right navigation keys to select On
or Off.
6. Press the down navigation key to highlight the Time field, then enter the
time that you wish for the alarm to sound.
7. Press the down navigation key once to highlight the am/pm field. Use the
left/right navigation keys to select am or pm.
8. Press the down navigation key once to highlight the Frequency field. Use
the left/right navigation keys to set the frequency (occurrence) of the alarm.
Below lists and defines the options for this field.
• Once: The alarm sounds only once, at the time specified.
• Daily: The alarm sounds every day at the time specified.
• Mon-Fri: The alarm sounds Monday through Friday at the time specified.
• Weekends: The alarm sounds Saturday through Sunday at the time specified.
9. Press the down navigation key once to highlight the first Ringer field. Use
the left/right navigation keys to set the ringer to Tone, Vibrate, or Light Only.
10. If you selected Tone, press the down navigation key again to highlight the
second field. Use the left/right navigation keys to set the alert tone to VZW
Default Tone, or select a tone from your My Ringtones or My Sounds
folders.
11. When all fields have correct information entered, press
SAVE to save
your settings.
Section 10: Tools 118
Disable an alarm before it sounds
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 4 (
) Alarm Clock. The Alarm Clock menu
displays with the Alarm 1 highlighted.
3. Use the navigation keys to highlight the alarm you wish to disable, then
press the right soft key
display.
4. Press 1 (
Options. A pop-up menu appears in the
) Off to turn the highlighted alarm off.
Press 2 (
) Reset Alarm to reset the highlighted alarm or
Press 3 (
) Reset All to reset all of the alarms.
Snooze
When an alarm sounds, a menu screen displays that allows you to either turn the
alarm off or to have the alarm ring again after 5 minutes. This is called Snooze.
To use this feature follow these steps:
1. Set one of your phone’s 3 alarms. For more information about setting an
alarm, see "Set An Alarm" on page 118.
2. When an alarm sounds, use the up/down navigation key to highlight
Snooze or Dismiss. To snooze, highlight Snooze and press
to set it to
ring again after 5 minutes. Or, highlight Dismiss to turn the alarm off
completely. The alarm turns off and the idle screen displays.
World Clock
World Clock allows you to view the time of day or night in any part of the world.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 5 (
3. Use the left soft key
) World Clock.
Cities to display the 45 supported cities. Press
to save your entry.
4. Press the right soft key
Options to view the following options:
• Set As Local Time: Sets the time according to the city chosen in the Cities field.
• DST On: Sets the Daylight Savings time option.
5. You can scroll through other cities by pressing the navigation keys.
6. Press
119
to return to idle mode.
Stop Watch
This feature allows you to use a stopwatch. Press the
START to start the
stopwatch. Press
STOP to stop stopwatch. Press the right soft key
Reset to erase recorded stopwatch time.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 6 (
) Stop Watch. The Stop Watch appears
in the display.
3. Press the
4. Press
START to start the stopwatch.
STOP to stop stopwatch.
5. Press the right soft key
Reset to erase recorded stopwatch time.
Notepad
Create and store notes in Notepad. Return to Notepad anytime to review and edit
your notes.
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 7 (
) Notepad.
3. If you have any stored notes, they appear as a list in the display. If this is
your first time in Notepad, No Note displays.
4. To add a new memo, press the left soft key
Add, then enter the
memo using the keypad.
5. While entering a memo, press the left soft key
Abc, to display a popup menu with the following text entry modes
• Word
• Abc
• ABC
• 123
• Symbols
6. Use the navigation keys to select a text entry modes and press
or
press
to exit the pop-up menu.
7. When you’re finished entering details for the note, press
. The note is
saved.
Section 10: Tools 120
Review, Edit, and Erase Memos
1. In idle mode, press
MENU, then press the right navigation key to
Settings & Tools and press
.
2. Press 2 (
) Tools, 7 (
) Notepad. The Notepad menu opens. If
you have any stored notes, they appear as a list in the display.
3. With a memo highlighted, press the right soft key
Options. A pop-up
menu with the options listed in the following table appears in the display:
• Edit: Edit the note currently highlighted or appearing in the display.
• Erase: Erase the note currently highlighted or appearing in the display.
• Erase All: Erase all notes.
• Lock/Unlock: Locks messages. When a message is locked it cannot be deleted
until it is unlocked.
4. Use the navigation keys to highlight an option or press
to exit the
pop-up menu.
5. Press
121
to perform the highlighted option’s function.
Section 11: Landscape Mode
Topics Covered
• Opening Your Phone to a Landscape View
• Open View of Your Phone - Landscape Mode
• Making a Call - Landscape Mode
• Answering a Call - Landscape Mode
• VoiceSignal Commands - Landscape Mode
• Creating and Sending Messages - Landscape Mode
• Wireless Sync Email - Landscape Mode
• E-Mail - Landscape Mode
• Mobile IM - Landscape Mode
• Chat - Landscape Mode
• My Account - Landscape Mode
• Multimedia - Landscape Mode
• Mobile Web - Landscape Mode
This section covers the functions associated with Landscape mode.
Section 11: Landscape Mode 122
Opening Your Phone to a Landscape View
The following illustration shows how to properly open the phone to a Landscape
orientation:
1. Close the phone.
2. Carefully grab the outer LCD section of the phone and turn it to the right.
Note: Be careful not to try and twist/turn the LCD into a Landscape orientation while the phone is in a
Portrait orientation (step 1 above), as this can damage the LCD.
123
Open View of Your Phone - Landscape Mode
The following illustration shows the main internal features of your phone, as
available in Landscape mode:
1. Alpha-numeric Keypad
Short Press: ABC
Long Press: 123, Symbols and
Special Characters
Soft key is not functional
in Landscape Mode
11. Backspace Key
Menus: Go back 1 menu
Messaging: Clear Characters
2. Navigation Keys
10. Enter Key
3. Clear Key
Menus: Select Menu Item
Messaging: Start a new line
Menus: Go Back 1 Menu
Messaging: Clear Characters
9. Right Soft Key (Landscape)
8. Fn Key
4. Left Soft Key (Landscape)
Toggle from 123 to ABC when dialing
7. Shift Key
Toggle between Abc-ABC-abc mode
5. NumLock Key
Toggle between 123 and ABC
6. Spacebar Key
Add spaces between characters and words
Features
1. Alpha-numeric Keypad: Use these keys to enter numbers, letters, and
characters.
2. Navigation Keys: These keys allow you to scroll through the phone menu
options.
3. Clear Key: Deletes characters from the display when you are in text entry
mode. Press to return to the previous menu or screen when navigating
features on your phone.
4. Left Soft Key (Landscape): This key is used to navigate through menus
and applications by selecting the choice available in the Left Soft key
Option.
5. NumLock Key: Use this key to toggle among the different text input
metthods. The currently selected input method can be shown at either the
upper-right or lower-left corners of the display, depending on the currently
application.
Section 11: Landscape Mode 124
6. Spacebar Key: Allows you to add spaces between words and characters.
7. Shift Key: Allows you to toggle the casing for Alphabet characters between
lowercase and uppercase.
8. Fn Key: Activates functions when pressed in conjuction with certain keys.
9. Right Soft Key (Landscape): This key is used to navigate through menus
and applications by selecting the choice available in the Right Soft key
Option.
10. Enter Key: Press to perform the function highlighted in the menu or
submenu.
11. Backspace Key: Erases or clears letters, numbers, or other characters
from a display field.
Making a Call - Landscape Mode
Note: In landscape mode, you can only make calls using the speakerphone.
1. Open your u740 in Landscape mode.
2. At the idle screen, enter the number you want to call using the gray
numeric keypad.
3. Press
.
Making Calls Using Contacts - In Landscape Mode
Contacts are entries that you create to store names, numbers, and other information
for people or groups of interest. If you’ve already entered information into your
Contacts list, you can recall and dial the contact easily.
Note: In landscape mode, you can only make calls using the speakerphone.
1. Open your u740 in Landscape mode.
2. At the idle screen, press the right soft key
Contacts.
3. Press the navigation up and down keys until the contact that you want to
call is highlighted.
4. When the desired contact is highlighted, press
VIEW. Details for the
contact appear in the display.
5. If the entry contains more than one number, use the navigation key to
highlight the desired number.
6. Press
125
to call the number.
Answering a Call - Landscape Mode
When you receive an incoming call, the Incoming screen appears in the display.
1. Press the
key to answer the call or the right soft key
Ignore to
send the call to voicemail or the left soft key
Quiet to silence the ringer.
Note: To change the answer options, see "Answer Options" on page 92.
VoiceSignal Commands - Landscape Mode
The following is a list of functions that you can perform using VoiceSignal speech
recognition on your phone.
• Call <Name or #>: Dial by saying a Name in your Contacts List or a Name and
a Location (home, work, mobile).
• Send <Message Type>: Send a picture, text, or video, message to a number
or to someone in your Contacts List.
• Lookup <Name>: Open the contact record for any name in your Contacts List.
• Go to <Menu>: Open any application installed on your device.
• Check <Item>: Provides details of your phone status, voicemail, missed calls,
time, battery level, signal strength and master volume level.
• My Account: Provide helpful information on how to use VoiceSignal. See "My
Account" on page 76.
• Help Guide: Provides a helpful tutorial on how to use VoiceSignal.
My Account - Landscape Mode
Using VoiceSignal, you can check your Verizon Wireless account status by voice
command.
Note: This features launches the browser to your account page and requires a data plan and is subject to
Verizon Wireless data coverage.
1. Open your u740 in Landscape mode.
2. In idle mode, press the
key.
3. A list of commands appears in the display and the audio prompt “Please
say a command” plays through them earpiece or speakerphone—if it is
enabled.
4. Say, "My Account" at a distance of 3-12 inches from the phone in a natural
voice.
Section 11: Landscape Mode 126
The phone's mobile web browser will launch and display your account information.
See Section 11, "Mobile Web" on page 132, for details about configuring and using
your mobile web browser.
Creating and Sending Messages - Landscape Mode
1. Open your u740 in Landscape mode.
2. Press the left soft key
3. Press 1 (
Message.
) New Message.
4. Press the number associated with the message type you would like to
create and send:
• 1(
) TXT Message
• 2(
) Picture Message
• 3(
) Video Message
• 4(
) Sketch Message
• 5(
) Postcard Message
• 6(
) Email Message
5. Enter the phone number or email address of the recipient. At any point
while entering your recipient(s) phone number or email address, press the
123 or
Add soft keys to display additional options.
6. Press
or
to highlight the Text: field.
7. Use the QWERTY keyboard and special function keys to create your
message.
• Press the Backspace key (
) to delete characters behind the blinking cursor.
• Press and hold keys to enter the symbols or numbers located on the top of the
key.
• For example to enter a period (.), press and hold
• Press
127
to lock/unlock text entry mode 123.
.
• Press
to cycle between upper case (ABC), lower case (abc), or initial
caps (Abc) for characters in ABC mode.
• Press
to dial a vanity number.
• For example to dial 1-800-SAMSUNG, enter the number 1-800 using the gray
numeric keys. Press
, using the QWERTY keyboard enter SAMSUNG
and press
.
Note: This feature is only functional in idle mode.
• Press
to move the insertion point to the next line in a message.
• Press the Spacebar (
) to insert spaces between words or
characters.
8. Complete applicable fields and press
SEND.
Entering Numbers - Landscape mode
1. In idle mode, press the left soft key
press 1 (
) New Message, 1 (
new text message.
Message, then
) TXT Message to compose a
2. Enter the phone number or email address of the recipient, then press the
down navigation key to move to the Text field.
3. Press the left soft key
Abc to display a pop-up menu containing the
text entry mode options.
4. Abc is highlighted by default. Use the up/down navigation keys to highlight
123, then press
or press
to enter numeric characters.
5. Enter the key that corresponds with the number that you wish to enter. For
example, press 4 (
) for the number 4.
6. When you are finished adding numbers, press
to return to Abc text
entry mode or press the left soft key
123 to select a different method of
text entry or press
SEND to send your message.
Wireless Sync Email - Landscape Mode
Wireless Sync from Verizon Wireless provides wireless synchronization of email,
calendar and contact information with your mobile device. Wireless Sync can
synchronize your business email, personal email or both. Wireless Sync supports
Microsoft Exchange, Lotus Domino, POP3 and IMAP email systems. Visit
www.wsync.com for more information on options for configuring Wireless Sync and
to create your account.
Section 11: Landscape Mode 128
Note: This service is a paid service which must be pre-registered and then activated through your service
provider prior to usage.
To Get Started
1. In idle mode, press the left soft key,
2. Press 5 (
Message.
) Wireless Sync Email.
3. When you finish reading the Wireless Sync Terms and Conditions press
to continue.
4. Select subscription and press
to continue the installation.
5. Press the
button to select Next to confirm and complete the
installation process.
6. From Internet Explorer on your computer navigate to
www.wirelesssync.vzw.com to setup your account and complete your
installation.
E-Mail - Landscape Mode
This menu allows you to send and receive E-Mail using Mobile Web. To use your
E-Mail, follow these steps:
1. Open your u740 in Landscape mode.
2. In idle mode, press the left soft key,
3. Press 7 (
Message.
) E-Mail.
4. Using the up and down navigation keys, select one of the following E-Mail
providers and press
.
• MSN® Hotmail
• AOL® Mail
• Yahoo!® Mail
• Find More
5. Use the on-screen application specific functions and options to use the
E-Mail applications.
129
Mobile IM - Landscape Mode
The Instant Messaging function allows you to send and receive instant messages
using one of the following communities:
• AOL® Instant Messenger TM
• MSN® Messenger Service
• Yahoo!® Messenger
Note: You must first create the Instant Message account before accessing it on your phone.
Using Mobile IM
1. Open your u740 in Landscape mode.
2. In idle mode, press the left soft key,
3. Press 8 (
Message.
) Mobile IM.
4. Select your instant message community using the left and right navigation
keys and press
.
5. Use the on-screen application specific functions and options to use the
instant message applications.
Chat - Landscape Mode
You have the ability to join wireless chat rooms from your phone. Send messages
including text and icons to many chat room participants or launch one-on-one
(private) chat rooms.
To access a chat room from the browser:
1. Open your u740 in Landscape mode.
2. In idle mode, press the left soft key,
3. Press 9 (
Message.
) Chat.
4. Mobile Web is launched. Using the up and down navigation keys, select one
of the following chat rooms and press
• UPOC CHAT
• LAVALIFE
• FRIENDZ
• LIFESTYLE
• POWER CHAT
• FIND MORE
.
Section 11: Landscape Mode 130
5. Use the on-screen application specific functions and options to use the
Chat applications.
My Account - Landscape Mode
The My Account menu connects to the Verizon Wireless Mobile Web. You can setup
Favorites or choose from the available applications.
1. In idle mode, press
MENU, use the right navigation key to highlight
Settings & Tools. Press 1 (
) My Account. The menus are listed
in the display.
2. Use the navigation keys to make your selection and press
. Follow the
on-screen instructions.
Multimedia - Landscape Mode
All Multimedia operations such as: Get It Now, Music & Tones, Picture & Video,
Games, News & Info, Tools on the Go, and Extras can be found within "Section 9:
Multimedia" on page 96.
Mobile Web - Landscape Mode
All Mobile Web operations can be found within "Section 12: Mobile Web" on page
132.
131
Section 12: Mobile Web
Topics Covered
• Mobile Web
• Launching Mobile Web
• Exit Mobile Web
• Navigate the Web
• Mobile Web Soft Keys
• Links
• Place a Call While Using Mobile Web
This section outlines the mobile web options available only while the phone is in a
landscape mode.
Mobile Web
Mobile Web allows you to surf the web from your wireless phone.
If you receive a call while using Mobile Web, the web session is suspended during
the call. Once the call ends, your Mobile Web session resumes where you left off.
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
Any time the service indicator icon is visible, you are connected to the Internet and billed accordingly. Rates
and prices vary according to your service contract. For further information on billing contact Verizon
Wireless.
Launching Mobile Web
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
1. Open your u740 in Landscape mode.
2. In idle mode, press the up navigation key. Mobile Web and a list of
categories (representing one or more web sites) appears in the display.
3. Use the navigation key to browse the categories.
Section 12: Mobile Web 132
4. Once the desired category is highlighted, press
to enter the category
list.
Exit Mobile Web
To exit the Mobile Web, press the
key.
Navigate the Web
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
When you use Mobile Web, some of the keys operate differently than during a
normal phone call.
Mobile Web presents on-screen items in any of the following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be numbered)
• Simple text
You can act on the options or links by using the soft keys.
Mobile Web Soft Keys
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
At the bottom of the Mobile Web display contains the browser commands. The
left
and right
soft keys on the keypad are used to perform the commands in
the display. These are called “soft keys” because their function changes depending
where you are in the application.
How Mobile Web keys work
The following table lists Mobile Web keys and functions.
Navigation Key: Use the navigation key to browse lists and
highlight options.
CLR Key: A browser back-up key. Press once to back up one page.
Press and hold to go back to Mobile Web home page.
Press to clear the last number, letter, or symbol entered. Press and
hold to completely clear the display.
133
Shift Key: Press before entering text to enable upper case
characters (in Abc mode).
Spacebar: Press to insert a space when entering text.
Numbers 1 - 9: Use the number keys to select items in a menu if
they are numbered.
END Key: Press to exit Mobile Web and return the phone to idle
mode.
Left Soft Key: Press the left soft key to go to the highlighted web
link and/or perform the function above it in the display.
Right Soft Key: The right soft key is the Menu key. Press this key to
display a pop-up menu with several options.
SEND Key: Press to dial a highlighted number.
Links
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
Links can serve several purposes, such as jumping to a different page, to a different
site, or initiating a phone call. Links are underlined (__). Normally, the left soft key
is used to select a highlighted link.
Place a Call While Using Mobile Web
Note: This feature is currently unavailable outside of the United States. Only available within the Verizon
Wireless Enhanced Services Area.
You can place a call while using Mobile Web if the website supports this feature.
Press the appropriate soft key to call the number. In most cases you can also press
to call the number. The Internet connection terminates when you initiate the
call. After you end the call, your phone returns to idle mode.
Section 12: Mobile Web 134
Section 13: Health and Safety Information
Topics Covered
• Health and Safety Information
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
135
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of 1.5
cm from the body. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
• Head: 0.684 W/kg
• Body-worn: 0.496W/kg
SAR information on this and other model phones can be viewed on-line at
www.fcc.gov/oet/fccid. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone. Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID number for a particular phone,
follow the instructions on the website and it should provide values for typical or
maximum SAR for a particular phone. Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/sar.
Section 13: Health and Safety Information 136
UL Certified Travel Adaptor
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG
ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
137
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user
that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
Section 13: Health and Safety Information 138
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
139
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible health effects of
wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research
will include both laboratory studies and studies of wireless phone users. The CRADA
will also include a broad assessment of additional research needs in the context of
the latest research developments around the world.
What steps can I take to reduce my exposure to radio frequency energy
from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since
the exposure level drops off dramatically with distance. For example, you could
use a headset and carry the wireless phone away from your body or use a
wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But
if you are concerned about the RF exposure from these products, you can use
Section 13: Health and Safety Information 140
measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce risks from exposure to RF
emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand,
if the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield the head from RF
radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user
from RF absorption use special phone cases, while others involve nothing more than
a metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
141
forced to boost its power to compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference occurs when a person uses
a compatible phone and a compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
Section 13: Health and Safety Information 142
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation/
• US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional layer
of convenience and safety to your wireless phone with one of the many
hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away from
your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergeny
number in the case of fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
143
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site www.wowcom.com
Provided by the Cellular Telecommunications & Internet Association
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches)
be maintained between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Section 13: Health and Safety Information 144
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from their
pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize potential interference.
If you have any reason to suspect that interference is taking place, switch your
phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
with their hearing devices. Not all phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled.
M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet
FCC requirements and are likely to be more usable with a hearing device’s telecoil
(“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of
the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing
devices may also be measured for immunity to this type of interference. Your
hearing device manufacturer or hearing health professional may help you find results
for your hearing device. The more immune your hearing aid is, the less likely you are
to experience interference noise from mobile phones.
145
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices requireyou to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
Section 13: Health and Safety Information 146
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911 or
other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this document
could void your warranty for this equipment, and void your authority to operate this
equipment. Only use approved batteries, antennas and chargers. The use of any
unauthorized accessories may be dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
147
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a
vehicle. Faulty installation or service may be dangerous and may invalidate
any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted
and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with
great force. Do not place objects, including both installed or portable wireless
equipment in the area over the air bag or in the air bag deployment area. If
wireless equipment is improperly installed and the air bag inflates, serious
injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to idle mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Section 13: Health and Safety Information 148
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to
the phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less power; talk
and idle time are greatly affected by the signal strength on the cellular
network and the parameters set by the network operator.
149
• Follow battery usage, storage and charging guidelines found in the user’s
guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When the operation time (talk
time and idle time) is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from
the power source. Do not leave the battery connected to a charger for more
than a week, since overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web sites
and second-hand dealers, not associated with reputable manufacturers and
carriers, might be selling incompatible or even counterfeit batteries and
chargers. Consumers should purchase manufacturer or carrier recommended
products and accessories. If unsure about whether a replacement battery or
charger is compatible, contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or
winter conditions, as you will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room temperature. A phone with a hot or cold
battery may temporarily not work, even when the battery is fully charged. Liion batteries are particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the +
and - terminals of the battery (metal strips on the battery), for example when
you carry a spare battery in a pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this
can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas,
the disposal of batteries in household or business trash may be prohibited.
For safe disposal options for Li-Ion batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not dispose of batteries in a
fire.
Section 13: Health and Safety Information 150
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to:
http://www.samsungwireless.com/recycling.htm
for more information.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years
• Keep the phone and all its parts and accessories out of the reach of small
children's.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that
will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may
damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal
circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a
stove or a radiator. The phone may explode when overheated.
• If your phone has an external antenna, use only the supplied or an approved
replacement antenna. Unauthorized antennas or modified accessories may
damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it
to your nearest qualified service facility. The personnel there will assist you,
and if necessary, arrange for service.
151
Section 14: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants to the
original purchaser (“Purchaser”) that SAMSUNG's Phones and accessories
(“Products”) are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
Batteries
Leather Case/ Pouch
Holster
Other Phone Accessories
1 Year
1 Year
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada. This Limited Warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks, and this Limited Warranty does not cover
any battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
Section 14: Warranty Information 152
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
153
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO
STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES
IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED
AS THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
Section 14: Warranty Information 154
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America, L.P. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Printed in Korea
155
Index
Numerics
1-touch dialing 58
2-touch dialing 58
3G protocol icon 15
3-touch dialing 58
A
Adding a New Contact Entry 50
Alarm clock
icon 17
snooze 119
turn off the alarm 119
Answer options 92
Auto answer icon 17
Auto retry 92
B
Backup to last menu 38
Battery 18
charging 21
indicator 22
installing 19
removing 20
strength icon 16
Bluetooth 77
about 77
icons 16
C
Calendar
add a new event 116
Call Functions 23
answering a call 24
Recent Calls 25
roaming 29
Call history
calls using 27
definition 25
deleting entry 28
icons 27
new contact 27
updating existing
contact 27
Call restriction 93
Camcorder
camcorder key 10
recording video 110
Camera
camera key 10
taking pictures 108
Change lock code 89
Changing Message Settings 73
Clear key 12
Clock Format 85
Command Keys 12
Contact List
finding a contact entry 56
Contacts
adding a new contact
entry 50
deleting a contact entry 57
editing an existing contact
entry 56
speed dialing 57
wait pause & 2-second
pause 53
Creating and Sending Messages in
Landscape Mode 64 127
Creating and Sending PIC-VIDEO
Messages 63
Creating and Sending TXT
Messages 61
,
156
Finding My Phone Number 59
Fn Key 14
Folder
inbox 68
D
Dialing
one-touch 58
three-touch 58
two-touch 58
Dialing Font 85
Disable alarm 119
Display 82
backlight 83
banner 82
language 87
screen icons 15
Display Theme 84
Downloading Music 98
Drafts folder 70
G
E
End key 13
Enter Key 14
Entering Text 44
changing text entry
mode 44
entering numbers 48
entering symbols 47
entering upper and lower
case 47
using VoiceMode 45
using Word Mode 46
F
Feature Specific to Landscape
Mode
Chat 75 130
E-Mail 74 129
Get It Now 96
Mobile IM 75 130
Wireless Sync Email 74
,
,
,
128
Finding a Contacts Entry 56
157
,
Get It Now 96
Get New PIX 106
Get Pictures & Videos 104
Getting Started 5
understanding this user
manual 6
GPS icons 16
Groups
creating 54
move entries from/to 54
send messages to 54
send PIX/FLIX msg to 55
viewing 53
H
Hard pause 53
Health and Safety Information 135
I
Icons
alarm on 17
alarm only 16
battery strength 16
display 15
dormant 15
signal strength 15
silent mode 16
TTY 16
Inbox folder 68
Indicator
calendar appointment 17
missed calls 17
new message 17
no service 15
roaming 15
signal strength 15
speakerphone 16
stand alone 15
Installing battery 19
Instant Messaging 130
In-use menu 25
L
Language setting 87
Left soft key 12
Links 134
Lock code, changing 89
Lock Mode 90
placing an emergency
call 90
Lock phone 88
M
,
Making a call 23 125
Memos, editing 121
Menu Navigation 38
menu outline 39
Menu shortcuts 38
Menu, in-use option 25
Message folder
drafts 70
erase options 72
inbox 68
Sent 69
Messages, receive in call 65
Messaging 60
types of messages 60
microSD/TransFlash Card
formatting 97
Mobile Web 132
exit 133
launch Mobile Web 132
links 134
navigate the web 133
soft keys 133
Mode
call answer 92
Multimedia 96
Music
downloading 98
playing with flip
closed 100
playing with flip open 100
transferring from PC 103
Music & Tones 97
My Music 99
My Name Card 59
N
Navigation key 13
Navigation key shortcuts 39
New message icon 17
News & Info 112
No service indicator 15
Non-Supported Battery 19
Notes and tips 7
Notes, description 7
P
Phone Info 95
Phone Settings 85
Shortcut Key 86
Standalone Mode 85
PIC messages
view later 65
Place a call while using Mobile
Web 134
Playlist
creating a playlist 102
editing a playlist 102
Postcard 66
Powering off 5
158
Powering on 5
R
Receive messages in call 65
Receive text messages 61
Receiving PIC-VIDEO Messages 64
Removing battery 20
Reset phone 89
Restrict calls 93
Retrieving a Message 61
Return to last menu 38
Reviewing sent 69
Right soft key 12
Ringer ID 94
Roaming
definition 29
options 29
Roaming indicator 15
S
Safe Use of your phone 137
Security
call restriction 93
edit lock code 89
lock phone 88
voice privacy 93
Security settings 87
Send key 13
Sent, reviewing messages 69
Set an alarm 118
Settings 76
backlight 83
banner 82
display settings 82
edit lock code 89
language 87
lock phone 88
My Account 76 131
resetting your phone 89
,
159
ringer settings 80
security settings 87
Sound Settings 76 131
Tools 76
Shift Key 14
Shortcut to menus 38
Signal strength icon 15
Silent mode icon 16
Sketch messages 66
Snooze 119
Sounds 79
Alert Sounds 80
Call Sounds 80
Earpiece Volume 81
Keypad Volume 81
Master Volume 79
Power On/Off 81
Service Alerts 81
Spacebar Key 14
Speakerphone Key 13
Speed dial, assigning 58
Standard Limited Warranty
Standard Limited
Warranty 152
Store numbers, shortcuts 50 51
,
, ,
57
,
Storing numbers after a call 52 57
Sync Music 103
T
Take PIX 108
Take Video 110
Text messages, receiving 61
Tip
find a name 24
Tip, description 7
Tools 76
Alarm Clock 76 118
,
,
Calculator 76 114
Calendar 76 116
converter 115
Notepad 76 120
Stop Watch 76 120
Tip, calculator 115
view an event 117
Voice Commands 76 114
World Clock 76 119
Travel Charger 22
TTY Mode 30 92
Turning Your Phone On and Off 5
Two-second pause 53
Two-touch dialing 58
,
,
,
,
,
,
U
Understanding Your Address book
Using Contacts List 49
Understanding Your Contacts 49
Understanding Your Phone 8
display screen 14
features of your phone 8
Voicemail 74
listening to 6
setting up 5
viewing messages 74
voicemail icon 17
VoiceSignal
description 34
digit dial 34
features 34 126
name dial 35
name lookup 36
open apps 36
phone status 36
send picture 35
send text 35
settings 30
,
W
Wallpaper 84
Warranty Information 152
V
V CAST Video
browsing/playing clips 105
configuring alerts 106
deleting clips 106
description 104
downloading clips 105
Vibrate mode icon 16
Video clips 104
View an event, calendar 117
View PIC Msg Later 65
Voice Call Icon 15
Voice Commands
menu, speech recognition,
voice commands 30
Voice privacy 93
160
Download PDF