Sumake ST-6343 Owner's Manual

Add to My manuals
5 Pages

advertisement

Sumake ST-6343 Owner's Manual | Manualzz
SUMAKE PNEUMATIC TOOLS
Air Riveting Nut Tool
- With Screw Type Nose Head
ST-6343
Specification:
Blind Rivet Setting
Capacity
Free Speed
Noise and Vibration:
M3, M4, M5, M6
(#6-32, #8-32, #10-24, #10-32,
1/4"-20)
1200 r/min
Air Consumption
8 CFM (226 L/min)
Overall Length
7.28” (185 mm)
Air Inlet (PT)
1/4” (6.35 mm)
Air Hose (I.D.)
3/8” (10 mm)
Air Pressure
90 psi (6.3 bar)
Net Weight
2.09 lbs (0.95 kg)
Noise
Vibration
EN ISO 20643
EN ISO 15744
Remark
Sound Pressure Level
No load: 88 dB(A)
Please always
wear ear
protector at
environment
noise level >
80 dB(A) due
to risk of
impaired
hearing!
Load:
< 2.5 m/s²
Sound power level
No load: 99 dB(A)
Uncertainty
K= 1.5 m/s²
Uncertainty
K= 3dB
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
ST-6343-S-1512B-FPF
EC DECLARATION OF CONFORMITY
We: SUMAKE INDUSTRIAL CO., LTD.
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan
declare in sole responsibility that the equipment
Equipment: AIR RIVETING NUT TOOL - WITH SCREW TYPE NOSE HEAD
Model/ Serial No.:ST-6343
to which this declaration applies, complies with these normative documents:

Machinery Directive: 2006/42/EC
and conforms to the following EN standard,

EN ISO 12100: 2010

EN ISO 11148-1:2011
Name and Signature/Position
Date and Place
2012/6/25
Mike Su – Managing Director
Taipei, Taiwan
ST-6343-D-1311A-FPF
OPERATION MANUAL
I. AIR SUPPLY :
(A) Tool in the range generally operate at a maximum pressure of 90 psi a (see specifications) and this should be
controlled via a combined regulator/oil /water separator which with proper maintenance will ensure a constant
supply of dry air and lubricating oil at all times. See Fig.1 below. Always check machine operating pressure before use.
Water in the compressor tank will cause serious corrosion to your air tools and should be drained daily to avoid
excessive water in your air supply. Dirty wet air rapidly shortens the life of your air tool.
If you are using an air tool on a hose over 25ft. Long it is advisable to increase the bore of the hose to the next
larger size available ie.1/4" increased 3/8". This will ensure adequate pressure and volume of air to power the machine.
Ⅱ. RECOMMENDED AIR SUPPLY :
Ⅲ. OPERATION :
Some air tools have inbuilt regulators which can be used to control speed/torque performance, on machines without
inbuilt regulators this can be done by varying the pressure on your air supply regulator
Ⅳ. MAINTENANCE :
Every day, bdfore use, remove the tool from the air line, use an oil can and pour the equivalent of a tablespoon
of suitable oil into the machine (through the air intake). Operate at low speed to ensure lubrication of all moving parts.
If machine is in constant use or is to be used for long periods of time a combination filter / lubricator must be fitted in
the system. At all times the system must be fitted with an air filter.
Recommended oil are Shell Tellus 22, Duckams Zircom 32 or Castrol AWS32. Do not use normal engine oil or similar.
Please note : failure to comply with the above Maintenance/Operationg Instructions could invalidate the Guarantee.
SAFETY RULES FOR AIR TOOLS PRODUSTS
1. Always wear safety goggles or glassed.
2. Always ensure machine is switched off before connecting to air supply.
3. Disconnect any machine from the air supply before changing blades or discs, and before servicing any type of machine.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion and possible failure.
5. Do not wear watches, rings, bracelets or loose clothing when using air tools.
6. Using only light weight coil hoses from a tool to the wall or compressor coupling.
Do not fit quick change couplings onto the machine as vibration can cause the coupling to fail.
7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency.
8. Do not increase the air pressure above the manufacturer's recommended level, as excessive overload can
cause the machine casing to split. Also this creates excessive wer on moving parts an possible failure.
9. In the interests of safety and possible damage to the machine / operator, always ensure that the machine
has spopped before putting it down after use.
10.Always ensure that the workpiece is firmly secured leaving both hands free to control the machine.
11.Always ensure that accessories such as blades, discs, sockets, etc. are rated/designed for use with the machine.
Also correctly and securely fastened before connection the machine to the air suply.
ST-6343-I-1311A-FP
ST-6343
AIR RIVETING NUT TOOL WITH COMPOSITE HANDLE
Quick Change Head Ass'y For Any Size
( M3, M4, M5, M6, #6-32, #8-32, #10-24, #10-32, 1/4"-20 )
#48, #43, #41, #40, #39, #38, #37
ST-6343-P-1704B-FP
ST-6343
AIR RIVETING NUT TOOL WITH COMPOSITE HANDLE
PARTS LIST
No.
Parts No.
1
6343-01
2
6343-02
3
6343-03
4
6343-04
5
6343-05
6
6343-06
7
6343-07
8
6343-08
9
6343-09
12
6343-12
24
6343-24
27
6343-27
28
6343-28
31
6343-31
33
6343-33
34
6343-34
37
6343-37
6343-38-1
6343-38-2
6343-38-3
6343-38-4
38
6343-38-8
6343-38-9
6343-38-10A
6343-38-10B
6343-38-11
6343-39-1
6343-39-2
6343-39-3
6343-39-4
39
6343-39-8
6343-39-9
6343-39-10A
6343-39-10B
6343-39-11
6343-40-1
6343-40-2
6343-40-3
6343-40-4
40
6343-40-8
6343-40-9
6343-40-10A
6343-40-10B
6343-40-11
41
6343-41
42
6343-42
43
6343-43
48
6343-48-1
Description
Motor Housing
Spring Pin
Ball Bearing
Rear Plate
Cylinder
Blade
Rotor (7T)
Front Plate
Ball Bearing
Motor Gasket
Needle Bearing
Planet Pin
Planet Gear (18T)
Planet Cage
Ball Bearing
Screw Housing
Spring
Hexagon Bit M3
Hexagon Bit M4
Hexagon Bit M5
Hexagon Bit M6
Hexagon Bit #6-32
Hexagon Bit #8-32
Hexagon Bit #10-24
Hexagon Bit #10-32
Hexagon Bit 1/4"-20
Bolt M3
Bolt M4
Bolt M5
Bolt M6
Bolt #6-32
Bolt #8-32
Bolt #10-24
Bolt #10-32
Bolt 1/4"-20
Bushing M3
Bushing M4
Bushing M5
Bushing M6
Bushing #6-32
Bushing #8-32
Bushing #10-24
Bushing #10-32
Bushing 1/4"-20
Washer
Internal Gear
Needle Bearing
Nut Anvil M3
Q'ty
1
1
1
1
1
6
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
No.
48
49
50
51
52
54
55
56
57
58
59
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
83
84
85
86
39
60
82
Parts No.
6343-48-2
6343-48-3
6343-48-4
6343-48-8
6343-48-9
6343-48-10A
6343-48-10B
6343-48-11
6343-49
6343-50
6343-51
6343-52
6343-54
6343-55
6343-56
6343-57
6343-58
6343-59
6343-61
6343-62
6343-63
6343-64
6343-65
6343-66
6343-67
6343-68
6343-69
6343-70
6343-71
6343-72
6343-73
6343-74
6343-75
6343-76
6343-77
6343-78
6343-79
6343-80
6343-81
6343-83
Description
Q'ty
Nut Anvil M4
1
Nut Anvil M5
1
Nut Anvil M6
1
Nut Anvil #6-32
1
Nut Anvil #8-32
1
Nut Anvil #10-24
1
Nut Anvil #10-32
1
Nut Anvil 1/4"-20
1
Sleeve Bushing
2
O-Ring (Φ3x1.5)
2
Sleeve
2
Pin
1
Throttle Bushing
2
O-Ring (Φ11.5x2)
4
O-Ring (Φ7x1.8)
8
O-Ring
2
Valve stem
2
Screw
1
O-Ring (Φ5X2)
2
Plug
2
O-Ring (Φ5X1.5)
2
Washer (Φ8x6.5x1.6)
2
Screw
2
Washer
1
Screw
1
Screw
1
Bushing
4
Tube
2
Handle
1
Roll Pin
2
Screw
2
O-Ring (Φ13.8x2.4)
1
Air Inlet Bushing
1
Diffuser Exhaust
1
Pin
1
Trigger
1
Nut
1
O-Ring (Φ5x1.5)
2
Plug
2
Gasket
1
***ACCESSORIES ***
6343-84
Air Regulator (T1010B)
1
6343-85
Wrench 34mm
1
6343-86
Wrench 38mm
1
6343-39
Any size Bolt
1
*** OPTIONAL ACCESSORY ***
6343-60
Rubber Cap
1
6343-82
Rubber Cover for Housing
1
ST-6343-P-1704B-FP

advertisement

Key Features

  • Screw type nose head
  • Composite handle
  • Quick change head assembly
  • Blind rivet setting
  • Various sizes
  • Air pressure 90 psi
  • Free speed 1200 r/min

Related manuals

Frequently Answers and Questions

What are the sizes of the rivets that can be used with this tool?
The tool can be used with rivets of sizes M3, M4, M5, M6, #6-32, #8-32, #10-24, #10-32, and 1/4"-20.
What is the maximum air pressure that this tool can handle?
The maximum air pressure for the Sumake ST-6343 is 90 psi.
What is the free speed of the tool?
The free speed of the tool is 1200 r/min.
What is the air consumption of the tool?
The air consumption of the tool is 8 CFM (226 L/min).
Download PDF

advertisement