Samsung | SCX-472x Series | User`s guide | Samsung SCX-472x Series User`s guide

User’s Guide
SCX-472x Series
SCX-470x Series
BASIC
BASIC
This guide provides information concerning installation, basic operation and
troubleshooting on windows.
ADVANCED
This guide provides information about installation, advanced configuration, operation and
troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
1. Introduction
3. Maintenance
Key benefits
5
Ordering supplies and accessories
71
Features by models
7
Available supplies
72
Useful to know
13
Available maintenance parts
73
About this user’s guide
14
Redistributing toner
74
Safety information
15
Replacing the toner cartridge
75
Machine overview
20
Monitoring the supplies life
77
Control panel overview
24
Setting the toner low alert
78
Turning on the machine
27
Cleaning the machine
79
Installing the driver locally
28
Reinstalling the driver
29
2. Menu overview and basic setup
4. Troubleshooting
Tips for avoiding paper jams
86
Clearing original document jams
87
Menu overview
31
Clearing paper jams
91
Changing the display language
40
Understanding the status LED
96
Media and tray
41
Understanding display messages
98
Basic printing
55
Basic copying
61
Basic scanning
65
Basic faxing
66
5. Appendix
Specifications
103
2
BASIC
Regulatory information
113
Copyright
126
3
1. Introduction
This chapter provides information you need to know before using the machine.
• Key benefits
5
• Features by models
7
• Useful to know
13
• About this user’s guide
14
• Safety information
15
• Machine overview
20
• Control panel overview
24
• Turning on the machine
27
• Installing the driver locally
28
• Reinstalling the driver
29
Key benefits
Environmentally friendly
Convenience
• To save toner and paper, this machine supports Eco feature.
• Easy Capture Manager allows you to easily edit and print whatever you
captured using the Print Screen key on the keyboard (see "Easy Capture
Manager" on page 255).
• To save paper, you can print multiple pages on one single sheet of paper
(see "Using advanced print features" on page 216).
• To save paper, you can print on both sides of the paper (double-sided
printing) (see "Using advanced print features" on page 216).
• To save electricity, this machine automatically conserves electricity by
substantially reducing power consumption when not in use.
Fast high resolution printing
• You can print with a resolution of up to 1,200 x 1,200 dpi effective output.
• Fast, on-demand printing.
SCX-472x Series, SCX-470x Series:
- For single-side printing, 28 ppm (A4) or 29 ppm (Letter).
- For duplex printing, 14 ppm (A4) or 15 ppm (Letter).
• Printing Status (or Smart Panel) is a program that monitors and informs you
of the machine’s status and allows you to customize the machine’s settings
(see "Using advanced print features" on page 216).
• AnyWeb Print helps you screen-capture, preview, scrap, and print the
screen of Windows Internet Explorer more easily, than when you use the
ordinary program (see "Samsung AnyWeb Print" on page 256).
• Smart Update allows you to check for the latest software and install the
latest version during the printer driver installation process. This is available
only for Windows.
Key benefits
Wide range of functionality and application support
• Supports various paper sizes (see "Print media specifications" on page 105).
• Print watermark: You can customize your documents with words, such as
“Confidential” (see "Using advanced print features" on page 216).
• Print posters: The text and pictures of each page of your document are
magnified and printed across the multiple sheets of paper and can then be
taped together to form a poster (see "Using advanced print features" on
page 216).
• You can print in various operating systems (see "System requirements" on
page 108).
• Your machine is equipped with a USB interface and/or a network interface.
Features by models
Some features and optional goods may not be available depending on model or country.
Operating System
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
SCX-470x ND Series
Windows
●
●
●
Macintosh
●
●
●
Linux
●
●
●
Unix
●
●
●
Operating System
(●: Included, Blank: Not available)
Software
Software
PCL / SPL printer drivera
PS printer driver
XPS printer driver
Direct Printing Utility
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
SCX-470x ND Series
●
●
●
Features by models
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
SCX-470x ND Series
Scan to PC settings
●
●
●
Fax to PC settings
●
●
Device settings
●
●
●
Samsung Printer Status
●
●
●
Smart Panel
●
●
●
AnyWeb Print
●
●
●
SyncThru™ Web Service
●
●
●
SyncThru Admin Web Service
●
●
●
Easy Eco Driver
●
●
●
Software
Samsung Easy
Printer Manager
Fax
Samsung Network PC
Fax
●
●
Scan
Twain scan driver
●
●
●
WIA scan driver
●
●
●
Samsung Scan Assistant
●
●
●
●
●
●
SmarThru 4
SmarThru Office
a. Depending on the operating system you use, the installed print driver may differ.
Features by models
(●: Included, Blank: Not available)
Features by models
Variety feature
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
SCX-470xND Series
Hi-Speed USB 2.0
●
●
●
Network Interface Ethernet 10/100 Base TX
wired LAN
●
●
●
Features
●
Network Interface 802.11b/g/n wireless LAN
Eco printing
●
●
●
Duplex (2-sided) printing
●
●
●
Automatic Document Feeder (ADF)
●
●
●
Handset
●
●
(SCX-472xHD Series, SCX-472xHN
Series only)
(SCX-472xHW Series only)
USB memory interface
Touch screen
Duplex Automatic Document Feeder (DADF)
Features by models
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
Multi-send
●
●
Delay send
●
●
Priority send
●
●
Secure receive
●
●
Duplex print
●
●
Send/ Receive
forward - fax
●
●
●
●
Features
Fax
SCX-470xND Series
Duplex send
Send/ Receive
forward - email
Send/ Receive
forward - server
Scan
Scanning to email
Scanning to SMB
server
Scanning to FTP
server
Duplex scan
Scan to PC
●
1. Introduction
11
Features by models
SCX-472xFD Series
SCX-472xHD Series
SCX-472xHN Series
SCX-472xFW Series
SCX-472xHW Series
SCX-470xND Series
ID card copying
●
●
●
Collation
●
●
●
Poster
●
●
●
Clone
●
●
●
2-up/ 4-up
●
●
●
Adjust background
●
●
●
●
●
●
Features
Copy
Book
Copy (Continue)
Margin shift
Edge erase
Gray enhance
Duplex copy
(●: Included, Blank: Not available)
1. Introduction
12
Useful to know
The machine does not print.
A paper jam has occurred.
• Open the print queue list and remove the document from the
list (see "Canceling a print job" on page 56).
• Open and close the front door.
• Remove the driver and install it again (see "Installing the driver
locally" on page 28).
• Check the instructions on removing jammed paper in this
manual and troubleshoot accordingly (see "Clearing paper
jams" on page 91).
• Select your machine as your default machine in your Windows.
Printouts are blurry.
Where can I purchase accessories or supplies?
• Inquire at a Samsung distributor or your retailer.
• Visit www.samsung.com/supplies. Select your country/region
to view product service information.
• The toner level might be low or uneven. Shake the toner
cartridge.
• Try a different print resolution setting.
• Replace the toner cartridge.
The status LED flashes or remains constantly on.
Where can I download the machine’s driver?
• Turn the product off and on again.
• Visit www.samsung.com to download the latest machine’s
driver, and install it on your system.
• Check the meanings of LED indications in this manual and
troubleshoot accordingly (see "Understanding the status LED"
on page 96).
About this user’s guide
This user's guide provides information for your basic understanding of the
machine as well as detailed steps to explain machine usage.
•
Read the safety information before using the machine.
•
If you have a problem using the machine, refer to the troubleshooting
chapter.
•
Terms used in this user’s guide are explained in the glossary chapter.
•
All illustrations in this user’s guide may differ from your machine depending
on its options or model you purchased.
•
The screenshots in this administrator’s guide may differ from your machine
depending on the machine’s firmware/driver version.
•
The procedures in this user’s guide are mainly based on Windows 7.
2
General icons
Icon
Text
Description
Caution
Gives users information to protect the machine from
possible mechanical damage or malfunction.
Note
Provides additional information or detailed
specification of the machine function and feature.
1
Conventions
Some terms in this guide are used interchangeably, as below:
•
Document is synonymous with original.
•
Paper is synonymous with media, or print media.
•
Machine refers to printer or MFP.
1. Introduction
14
Safety information
These warnings and precautions are included to prevent injury to you and
others, and to prevent any potential damage to your machine. Be sure to read
and understand all of these instructions before using the machine. After reading
this section, keep it in a safe place for future reference.
4
Operating environment
Warning
3
Important safety symbols
Do not use if the power cord is damaged or if the electrical outlet is
not grounded.
Explanation of all icons and signs used in this chapter
Warning
Hazards or unsafe practices that may result in severe
personal injury or death.
Caution
Hazards or unsafe practices that may result in minor
personal injury or property damage.
Do not attempt.
This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or
heavy objects, candles, lit cigarettes, etc.).
This could result in electric shock or fire.
• If the machine gets overheated, it releases smoke, makes
strange noises, or generates an odd odor, immediately turn off
the power switch and unplug the machine.
• The user should be able to access the power outlet in case of
emergencies that might require the user to pull the plug out.
This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
Stepping on or allowing the power cord to be crushed by a heavy
object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the
plug with wet hands.
This could result in electric shock or fire.
1. Introduction
15
Safety information
5
Caution
During an electrical storm or for a period of non-operation,
remove the power plug from the electrical outlet.
Operating method
Caution
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Do not forcefully pull the paper out during printing.
Burns could occur.
It can cause damage to the machine.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections and
request assistance from qualified service personnel.
Be careful not to put your hand between the machine and paper
tray.
Otherwise, this could result in electric shock or fire.
You may get injured.
If the machine does not operate properly after these instructions
have been followed, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
This machine's power reception device is the power cord.
Otherwise, this could result in electric shock or fire.
Be care when replacing paper or removing jammed paper.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
Call an electrician to change the electrical outlet, or this could
result in electric shock.
To switch off the power supply, remove the power cord from the
electrical outlet.
New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
Burns can occur.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
When removing jammed paper, do not use tweezers or sharp metal
objects.
This could result in electric shock or fire and/or injury to your pet.
It can damage the machine.
1. Introduction
16
Safety information
Do not allow too many papers to stack up in the paper output tray.
Caution
It can damage the machine.
Do not block or push objects into the ventilation opening.
This could result in elevated component temperatures which can
cause damage or fire.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
6
Installation / Moving
Before moving the machine, turn the power off and disconnect all
cords.
Then lift the machine:
•
If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
•
If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift
with 2 people.
•
If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or
more people.
The machine could fall, causing injury or machine damage.
Do not place the machine on an unstable surface.
Warning
The machine could fall, causing injury or machine damage.
Use only No.26 AWGa or larger, telephone line cord, if necessary.
Otherwise, it can cause damage to the machine.
Do not place the machine in an area with dust, humidity, or water
leaks.
This could result in electric shock or fire.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the machine, and could result
in electric shock or fire.
1. Introduction
17
Safety information
The machine should be connected to
the power level which is specified on the label.
When you are working inside the machine replacing supplies or
cleaning the inside, do not operate the machine.
If you are unsure and want to check the power level you are using,
contact the electrical utility company.
You could get injured.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
Children could get hurt.
If the machine is not well-ventilated, this could result in fire.
Do not disassemble, repair or rebuild the machine by yourself.
Do not overload wall outlets and extension cords.
It can damage the machine. Call a certified technician when the
machine needs repairing.
This can diminish performance, and could result in electric shock
or fire.
a. AWG: American Wire Gauge
Keep cleaning supplies away from children.
Keep the power cable and the contact surface of the plug clean
from dust or water.
Otherwise, this could result in electric shock or fire.
7
Maintenance / Checking
To clean and operate the machine, strictly follow the user's guide
provided with the machine.
Otherwise, you could damage the machine.
Caution
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the
machine.
• Do not remove any covers or guards that are fastened with
screws.
• Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.
• The machine should only be repaired by a Samsung service
technician.
This could result in electric shock or fire.
1. Introduction
18
Safety information
8
Supply usage
Using recycled supplies, such as toner, can cause damage to the
machine.
In case of damage due to the use of recycled supplies, a service
fee will be charged.
Caution
Do not disassemble the toner cartridge.
Toner dust can be dangerous if inhaled or ingested.
Do not burn any of the supplies such as toner cartridge or fuser
unit.
This could cause an explosion or uncontrollable fire.
When storing supplies such as toner cartridges, keep them away
from children.
Toner dust can be dangerous if inhaled or ingested.
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
Toner dust can be dangerous if inhaled or ingested.
When toner gets on your clothing, do not use hot water to wash
it.
Hot water sets toner into fabric. Use cold water.
1. Introduction
19
Machine overview
9
Accessories
Power cord
Quick installation guide
Software CDa
Handsetb
Misc. accessoriesc
a. The software CD contains the print drivers and software applications.
b. Handset model only (see "Features by models" on page 7)
c. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.
1. Introduction
20
Machine overview
10
Front view
• This illustration may differ from your machine depending on your model.
• Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7).
1
Document feeder cover
7
Manual feeder tray
13
Scanner glass
2
Document feeder guide cover
8
Front cover
14
Document feeder input tray
1. Introduction
21
Machine overview
3
Document feeder output tray
9
Output tray
15
Paper width guide on a document feeder
4
Control Panel
10
Output support
16
Document feeder output support
5
Paper level indicator
11
Paper width guide on a manual feeder
17
Handseta
6
Tray
12
Scanner lid
a. Handset model only (see "Features by models" on page 7).
1. Introduction
22
Machine overview
11
Rear view
• This illustration may differ from your machine depending on your model.
• Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7).
1
2
Network port
Extension telephone socket (EXT)
(SCX-472x Series only)
3
Telephone line socket (Line)
5
(SCX-472x Series only)
4
USB port
6
Power receptacle
Rear cover
1. Introduction
23
Control panel overview
This control panel may differ from your machine depending on its model.
There are various types of control panels.
1
Eco
Turn into eco mode to reduce toner consumption
and paper usage (see"Eco printing" on page 58).
2
(WPS)
Configures the wireless network connection easily
without a computer (see Advanced Guide).
12
A Type (SCX-472x Series)
3
4
Darkness
Adjust the brightness level to make a copy for
easier reading, when the original contains faint
markings and dark images.
ID Copy
Allows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID
card copying" on page 63).
(Power)
5
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
Switches to Fax mode.
(Fax)
6
Switches to Copy mode.
(Copy)
Switches to Scan mode.
7
(Scan)
8
(Menu)
9
Left/Right Arrows
Opens Menu mode and scrolls through the
available menus.
Scrolls through the options available in the
selected menu and increases or decreases values.
1. Introduction
24
Control panel overview
13
10 OK
Confirms the selection on the screen.
11
Sends you back to the upper menu level.
B Type (SCX-470x Series)
(Back)
12
Starts a job.
(Start)
Stops an operations at any time.
13
(Stop/Clear)
14 Status LED
Indicates the status of your machine (see
"Understanding the status LED" on page 96).
15 Numeric keypad
Dials a number or enters alphanumeric characters.
16
(On Hook Dial)
When you press this button, you can hear a dial
tone. Then enter a fax number. It is similar to
making a call using speaker phone.
Redial/Pause(-)
Redials the last number in ready mode, or inserts a
pause(-) into a fax number in edit mode.
(Address Book)
Allows you to store frequently used fax numbers or
search for stored fax numbers.
17
18
19
Display screen
Shows the current status and displays prompts
during an operation.
1
Eco
Turn into eco mode to reduce toner consumption
and paper usage (see"Eco printing" on page 58).
1. Introduction
25
Control panel overview
2
3
4
Darkness
Adjust the brightness level to make a copy for
easier reading, when the original contains faint
markings and dark images.
ID Copy
Allows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID
card copying" on page 63).
Scan to
5
6
(Power)
Display screen
7
(Menu)
Indicates the status of your machine (see
"Understanding the status LED" on page 96).
14
Adjusting the control panel
Sends scanned data (see "Basic Scanning" on page
65).
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
Shows the current status and displays prompts
during an operation.
Opens Menu mode and scrolls through the
available menus.
8
Left/Right Arrows
Scrolls through the options available in the
selected menu and increases or decreases values.
9
OK
Confirms the selection on the screen.
10
13 Status LED
Sends you back to the upper menu level.
(Back)
Starts a job.
11
(Start)
Stops an operations at any time.
12
(Stop/Clear)
1. Introduction
26
Turning on the machine
1
Connect the machine to the electricity supply first.
Turn the switch on if the machine has a power switch.
1. Introduction
27
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
Advanced Guide).
• If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced
guide.
2
Insert the supplied software CD into your CD-ROM drive.
Click Start > All programs > Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
3
Select Install Now.
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Selecting Custom Installation allows you to choose which programs to
install.
• Only use a USB cable no longer than 3 meters (118 inches).
15
Windows
1
Make sure that the machine is connected to your computer and
powered on.
If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
(SCX-470x Series does not support the Wireless Setting and
Installation menu)
4
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
5
Follow the instructions in the installation window.
1. Introduction
28
Reinstalling the driver
If the printer driver does not work properly, follow the steps below to reinstall the driver.
16
Windows
1
2
3
4
Make sure that the machine is connected to your computer and powered on.
From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Uninstall.
Follow the instructions in the installation window.
Insert the software CD into your CD-ROM drive and install the driver again (see "Installing the driver locally" on page 28).
1. Introduction
29
2. Menu overview and basic
setup
This chapter provides information about the overall menu structure and the basic setup options.
• Menu overview
31
• Changing the display language
40
• Media and tray
41
• Basic printing
55
• Basic copying
61
• Basic scanning
65
• Basic faxing
66
Menu overview
The control panel provides access to various menus to set up the machine or use
the machine’s functions.
6
7
Press OK to save the selection.
Press
(Stop/Clear) to return to the ready mode.
• An asterisk (*) appears next to the currently selected menu.
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• Some menu names may differ from your machine depending on its
options or the models.
• SCX-470x Series does not support the fax features.
SCX-472x Series
Items
Fax Featurea
Options
Darkness
Light+5- Light+1
Normal
Dark+1- Dark+5
1
Accessing the menu
Contrast
Light+5- Light+1
Normal
1
Select the Fax, Copy, or Scan button on the control panel depending on
the feature to be used.
2
Select
(Menu) until the menu you want appears on the bottom line
of the display and press OK.
3
Press the left/right arrows until the needed menu item appears and press
OK.
4
If the setting item has sub menus, repeat step 3.
Dark+1- Dark+5
Resolution
Standard
Fine
Super Fine
Photo Fax
Color Fax
Scan Size
Multi Send
Delay Send
5
Press the left/right arrows to access the required value.
2. Menu overview and basic setup
31
Menu overview
Items
Fax Featurea
Options
Priority Send
Forward
Secure Receive
Items
Fax Setupa
Options
Receiving
Receive Mode
Fax
Ring To Answer
PC
Stamp RCV Name
RCV Start Code
On
Auto Reduction
Off
Discard Size
Print
Junk Fax Setup
Add Page
DRPD Mode
Cancel Job
Fax Setupa
Sending
Duplex Print
Redial Times
Change Default
Resolution
Redial Term
Darkness
Prefix Dial
Contrast
ECM Mode
Scan Size
Send Report
Auto Report
Image TCR
Dial Mode b
On
Off
Copy Feature
Scan Size
Reduce/Enlarge
Darkness
Light+5- Light+1
Normal
Dark+1- Dark+5
2. Menu overview and basic setup
32
Menu overview
Items
Copy Feature
Options
Contrast
Original Type
Layout
Light+5- Light+1
Items
Copy Setup
Options
Change Default
Normal
Copies
Dark+1- Dark+5
Copy Collation
Text
Reduce/Enlarge
Text/Photo
Duplex
Photo
Darkness
Contrast
Normal
Original Type
2-Up
Adjust Bkgd.
4-Up
ID copy
Print Setup
Orientation
Clone Copy
Duplex
Off
Off
1 -> 2 Side Long
Auto
1 -> 2 SideShort
Enhance Lev.1
Copies
[1-999]:1
Enhance Lev.2
Resolution
600dpi-Normal
Erase Lev.1- Erase Lev.4
Duplex
Portrait
Landscape
Poster Copy
Adjust Bkgd.
Scan Size
Off
1 -> 2 Side Long
1 -> 2 SideShort
1200dpi-Best
Darkness
Normal
Light
Dark
2. Menu overview and basic setup
33
Menu overview
Items
Print Setup
Options
Clear Text
Auto CR
Emulation
Off
Items
System Setup
Options
Machine Setup
Machine ID
Minimum
Fax Numbera
Medium
Date & Time
Maximum
Clock Mode
LF
Language
LF+CR
Power Save
Emulation Type
Wakeup Event
Setup
System Timeout
Job Timeout
Altitude Adj.
Auto Continuec
Paper Mismatch
Paper Substitc
PrintBlankPage
Toner Save
Eco Settings
Paper Setup
Paper Size
Paper Type
Paper Source
Margin
2. Menu overview and basic setup
34
Menu overview
Items
System Setup
Options
Sound/Volume
Report
Key Sound
Items
System Setup
Options
Clear Setting
Alarm Sound
Print Setup
Speaker
Fax Setupa
Ringer
Copy Setup
All Report
System Setup
Configuration
Network Setup
Supplies Info.
Address Book
Address Book
Fax Senta
Fax Senda
Fax Receiveda
Fax Senta
Network
TCP/IP (IPv4)
DHCP
Fax Receiveda
BOOTP
Schedule Jobs
Static
Junk Faxa
TCP/IP (IPv6)
Network Conf.
Usage Counter
Maintenance
All Settings
IPv6 Activate
DHCPv6 Config
Ethernet Speed
Automatic
Fax Optionsa
10Mbps Half
CLR Empty Msgd
10Mbps Full
Supplies Life
100Mbps Half
Serial NO.
100Mbps Full
TonerLow Alert
2. Menu overview and basic setup
35
Menu overview
Items
Network
Options
Clear Setting
Items
Copy Feature
Options
Contrast
Normal
Network Conf.
Wirelessa
Dark+1- Dark+5
Wi-Fi ON/OFF
WPS Setting
Original Type
Text
WLAN Setting
Text/Photo
WLAN Default
Photo
WLAN Signal
a.
b.
c.
d.
Light+5- Light+1
Layout
Normal
2-Up
SCX-472x Series Only.
This setting may not be available depending on your country.
This option only appears if “paper mismatch” is enabled.
This option only appears when small amount of toner is left in the cartridge.
4-Up
ID copy
Poster Copy
SCX-470x Series
Clone Copy
Adjust Bkgd.
Items
Copy Feature
Off
Auto
Options
Enhance Lev.1
Scan Size
Enhance Lev.2
Reduce/Enlarge
Darkness
Erase Lev.1- Erase Lev.4
Light+5- Light+1
Normal
Dark+1- Dark+5
Duplex
Off
1 -> 2 Side Long
1 -> 2 SideShort
2. Menu overview and basic setup
36
Menu overview
Items
Copy Setup
Options
Change Default
Scan Size
Items
Print Setup
Options
Clear Text
Off
Copies
Minimum
Copy Collation
Medium
Reduce/Enlarge
Maximum
Duplex
Auto CR
Darkness
Contrast
Original Type
LF
LF+CR
Emulation
Emulation Type
Setup
Adjust Bkgd
Print Setup
Orientation
Portrait
Landscape
Duplex
Off
1 -> 2 Side Long
1 -> 2 SideShort
Copies
[1-999]:1
Resolution
600dpi-Normal
1200dpi-Best
Darkness
Normal
Light
Dark
2. Menu overview and basic setup
37
Menu overview
Items
System Setup
Options
Machine Setup
Items
Machine ID
System Setup
Options
Report
Date & Time
Configuration
Clock Mode
Supplies Info.
Language
Scheduled Jobs
Power Save
Network Conf.
Wakeup Event
Usage Counter
System Timeout
Maintenance
Job Timeout
CLR Empty Msgb
Supplies Life
Altitude Adj.
Serial Number
Auto Continue
a
Paper Mismatch
c
Paper Setup
All Report
Toner Low Alert
System Setup
Clear Setting
All Settings
Paper Substit
Print Setup
Print Blank Page
Copy Setup
Toner Save
System Setup
Eco Settings
Network Setup
Paper Size
Paper Type
Paper Source
Margin
2. Menu overview and basic setup
38
Menu overview
Items
Network
Options
TCP/IP (IPv4)
DHCP
BOOTP
Static
TCP/IP (IPv6)
IPv6 Activate
DHCPv6 Config
Ethernet Speed
Automatic
10Mbps Half
10Mbps Full
100Mbps Half
100Mbps Full
Network
Clear Setting
Network Conf.
a. This option only appears if “paper mismatch” is enabled.
b. This option only appears when small amount of toner is left in the cartridge.
2. Menu overview and basic setup
39
Changing the display language
To change the language that is displayed on the control panel, follow these
steps:
1
Select
(Menu) > System Setup > Machine Setup > Language on
the control panel.
It may be necessary to press OK to navigate to lower-level menus for some
models.
2
3
Select the language you want to display on the control panel.
Press OK to save the selection.
2. Menu overview and basic setup
40
Media and tray
This chapter provides information on how to load print media into your
machine.
2
1
• Using print media that does not meet these specifications may cause
problems or require repairs. Such repairs are not covered by Samsung’s
warranty or service agreements.
• Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
3
1 Tray extension guide
2 Paper length guide
3 Paper width guide
• Using inflammable print media can cause a fire.
• Use designated print media (see "Print media specifications" on page
105).
If you do not adjust the guide, it may cause paper registration, image skew,
or jamming of the paper.
The use of inflammable media or foreign materials left in the printer may
lead to overheating of the unit and, in rare cases may cause a fire.
2
Tray overview
To change the size, you need to adjust the paper guides.
2. Menu overview and basic setup
41
Media and tray
The paper quantity indicator shows the amount of paper in the tray.
1
Power
voltage
Available paper
110V
Letter, Legal, US Folio, Oficio
220V
A4
2
1 Full
2 Empty
Paper type available for duplex printing
Depending on the power voltage your machine uses, available paper types for
duplex printing differs. Refer to the below table.
2. Menu overview and basic setup
42
Media and tray
3
Loading paper in the tray
When printing using the tray, do not load paper on the manual feeder, it may cause a paper jam.
2. Menu overview and basic setup
43
Media and tray
4
Loading in manual feeder
The manual feeder can hold special sizes and types of print material, such as postcards, note cards, and envelopes (see "Print media specifications" on page 105).
Tips on using the manual feeder
• Load only one type, size and weight of print media at time in the manual feeder.
• To prevent paper jams, do not add paper while printing when there is still paper in the manual feeder.
• Print media should be loaded face up with the top edge going into the manual feeder first and be placed in the center of the tray.
• To ensure printing quality and to prevent paper jams, only load the available paper (see "Print media specifications" on page 105).
• Flatten any curl on postcards, envelopes, and labels before loading them into the manual feeder.
• When printing on special media, you must follow the loading guidelines (see "Printing on special media" on page 45).
• When papers overlap when printing using the manual feeder, open tray and remove the papers then try printing again.
• When paper does not feed well while printing, push the paper in manually until it starts feeding automatically.
• When the machine is in a power save mode, the machine does not feed paper from the manual feeder. Wake up the machine by pressing the power button before
using the manual feeder.
2. Menu overview and basic setup
44
Media and tray
5
Printing on special media
The table below shows the special media usable in each tray.
The media is also shown in the Printing Preferences. To get the higest printing quality, select the proper media type from the Printing preferences window > Paper
tab > Paper Type (see "Opening printing preferences" on page 57).
For example, if you want to print on labels, select Labels for Paper Type.
2. Menu overview and basic setup
45
Media and tray
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 105).
• Printing the special media (Face up)
If special media are printed out with curl, wrinkles, crease, or black bold
lines, open the rear cover and try printing again. Keep the rear cover
opened during printing.
Types
Tray
●
Thicker
Thin
●
●
Bond
●
●
●
Color
CardStock
To see for paper weights for each sheet, refer to "Print media specifications" on
page 105.
Manual feeder
●
●
Labels
●
Transparency
●
Envelope
●
Thick
Envelope
●
Preprinted
●
Cotton
●
Recycled
●
●
Archive
●
●
(●: Included, Blank: Not available)
Types
Tray
Manual feeder
Plain
●
●
Thick
●
●
Envelope
Printing successfully on envelopes depends upon the quality of the envelopes.
2. Menu overview and basic setup
46
Media and tray
To print an envelope, place it as shown in the following figure.
•
Do not use envelopes with clasps, snaps, windows, coated lining, selfadhesive seals, or other synthetic materials.
•
Do not use damaged or poorly made envelopes.
•
Be sure the seam at both ends of the envelope extends all the way to the
corner of the envelope.
1
2
•
Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s fusing
temperature for 0.1 second about 170°C (338 °F). The extra flaps and strips
might cause wrinkling, creasing, or jams, and may even damage the fuser.
•
For the best print quality, position margins no closer than 15 mm from the
edges of the envelope.
•
Avoid printing over the area where the envelope’s seams meet.
If envelopes are printed out with wrinkles, creases, or black bold lines, open the
rear cover and try printing again. Keep the rear cover opened during printing.
•
When selecting envelopes, consider the following factors:
2 otherwise; jams may occur.
-
Weight: should not exceed 90 g/m
-
Construction: should lie flat with less than 6 mm curl and should not
contain air.
-
Condition: should not be wrinkled, nicked, nor damaged.
-
Temperature: should resist the heat and pressure of the machine
during operation.
•
Use only well-constructed envelopes with sharp and well-creased folds.
•
Do not use stamped envelopes.
Acceptable
Unacceptable
2. Menu overview and basic setup
47
Media and tray
Transparency
To avoid damaging the machine, use only transparencies designed for use in
laser printers.
•
Must withstand the machine’s fusing temperature.
•
Place them on a flat surface after removing them from the machine.
•
Do not leave unused transparencies in the paper tray for long. Dust and dirt
may accumulate on them, resulting in spotty printing.
•
To avoid smudging caused by fingerprints, handle them carefully.
•
To avoid fading, do not expose printed transparencies to prolonged
sunlight.
•
Ensure that transparencies are not wrinkled, curled, or have any torn edges.
•
Do not use transparencies that separate from the backing sheet.
•
To prevent transparencies from sticking to each other, do not let the printed
sheets stack up as they are being printed out.
•
Recommended media: Transparency for a color laser printer by Xerox, such
as 3R 91331(A4), 3R 2780 (Letter)
2. Menu overview and basic setup
48
Media and tray
Labels
To avoid damaging the machine, use only labels designed for use in laser
printers.
•
-
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
•
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can cause
paper jams. Exposed adhesive can also cause damage to machine
components.
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the machine.
•
Do not use labels that are separating from the backing sheet or are wrinkled,
bubbled, or otherwise damaged.
When selecting labels, consider the following factors:
-
Adhesives: Should be stable at your machine’s fusing temperature.
Check your machine’s specifications to view the fusing temperature
(about 170°C (338°F)).
-
Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets that have spaces between the labels, causing
serious jams.
-
Curl: Must lie flat with no more than 13 mm of curl in any direction.
2. Menu overview and basic setup
49
Media and tray
Card stock/ Custom-sized paper
Preprinted paper
When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
•
In the software application, set the margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
•
Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second (about 170°C (338°F)).
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
2. Menu overview and basic setup
50
Media and tray
6
7
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
Preparing originals
•
Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than
216 x 356 mm (8.5 x 14 inches).
•
Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
It may be necessary to press OK to navigate to lower-level menus for some
models.
1
Select
(Menu) > System Setup > Paper Setup > Paper Size or
Paper Type on the control panel.
2
3
Select the tray and the option you want.
Press OK to save the selection.
• The settings set from the machine driver override the settings on the
control panel.
a To print from an application, open an application and start the print
menu.
b Open Printing Preferences (see "Opening printing preferences" on
page 57).
-
Carbon-paper or carbon-backed paper
-
Coated paper
-
Onion skin or thin paper
-
Wrinkled or creased paper
-
Curled or rolled paper
-
Torn paper
•
Remove all staples and paper clips before loading.
•
Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
•
Do not load originals that include different sizes or weights of paper.
•
Do not load booklets, pamphlets, transparencies, or documents with other
unusual characteristics.
c Press the Paper tab and select an appropriate paper.
• If you want to use special-sized paper such as billing paper, select the
Paper tab > Size > Edit... and set Custom Paper Size Settings in the
Printing Preferences (see "Opening printing preferences" on page 57).
2. Menu overview and basic setup
51
Media and tray
8
Loading originals
1
Lift and open the scanner lid.
You can use the scanner glass or the document feeder to load an original for
copying, scanning, and sending a fax(SCX-472x Series only).
On the scanner glass
Using the scanner glass, you can copy or scan originals. You can get the best
scan quality, especially for colored or gray-scaled images. Make sure that no
originals are in the document feeder. If an original is detected in the document
feeder, the machine gives it priority over the original on the scanner glass.
2. Menu overview and basic setup
52
Media and tray
2
Place the original face down on the scanner glass. Align it with the
registration guide at the top left corner of the glass.
• Be careful not to break the scanner glass. You may get hurt.
• Do not put hands while closing the scanner lid. The scanner lid may fall
on your hands and get hurt.
• Do not look the light from inside of the scanner while copying or
scanning. It is harmful to eyes.
In the document feeder
Using the document feeder, you can load up to 40 sheets of paper (75 g/m2, 20
lbs bond) for one job.
1
3
Flex or fan the edge of the paper stack to separate the pages before
loading originals.
Close the scanner lid.
• Leaving the scanner lid open while copying may affect copy quality and
toner consumption.
• Dust on the scanner glass may cause black spots on the printout. Always
keep it clean (see "Cleaning the machine" on page 79).
• If you are copying a page from a book or magazine, lift the scanner lid
until its hinges are caught by the stopper and then close the lid. If the
book or magazine is thicker than 30 mm, start copying with the scanner
lid open.
2. Menu overview and basic setup
53
Media and tray
2
Load the original face up into the document feeder input tray. Make sure
that the bottom of the original stack matches the paper size marked on
the document input tray.
3
Adjust the document feeder width guides to the paper size.
• Dust on the document feeder glass may cause black lines on the
printout. Always keep the glass clean (see "Cleaning the machine" on
page 79).
• To print on both sides of the paper using the ADF, from the control panel
press
(Copy) >
(Menu) > Copy Feature > Duplex > 1 -> 2 Side
Long or 1 -> 2 SideShort and print on one side of the paper, then reload
the sheet to print on the other side.
2. Menu overview and basic setup
54
Basic printing
For special printing features, refer to the Advanced Guide (see "Using
advanced print features" on page 216).
3
Select your machine from the Select Printer list.
4
The basic print settings including the number of copies and print range
are selected within the Print window.
9
Printing
If you are a Macintosh or Linux user, refer to the "Macintosh printing" on
page 224 or "Linux printing" on page 225.
The following Printing Preferences window is for Notepad in Windows 7.
1
2
Open the document you want to print.
To take advantage of the advanced printing features, click Properties or
Preferences from the Print window (see "Opening printing preferences" on
page 57).
Select Print from the File menu.
5
To start the print job, click OK or Print in the Print window.
2. Menu overview and basic setup
55
Basic printing
10
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as
follows:
•
You can access this window by simply double-clicking the machine icon
(
•
) in the Windows task bar.
You can also cancel the current job by pressing
control panel.
(Stop/Clear) on the
2. Menu overview and basic setup
56
Basic printing
11
Opening printing preferences
4
Click Properties or Preferences.
• The Printing Preferences window that appears in this user’s guide may
differ depending on the machine in use.
• When you select an option in Printing Preferences, you may see a
warning mark
or
. An
mark means you can select that certain
option but it is not recommended, and an
mark means you cannot
select that option due to the machine’s setting or environment.
1
2
3
Open the document you want to print.
Select Print from the file menu. The Print window appears.
Select your machine from the Select Printer.
You can check the machine’s current status pressing the Printer Status
button (see "Using Samsung Printer Status" on page 264).
Using a favorite setting
The Presets option, which is visible on each preferences tab except for the
Samsung tab, allows you to save the current preferences for future use.
To save a Presets item, follow these steps:
2. Menu overview and basic setup
57
Basic printing
1
2
Change the settings as needed on each tab.
12
Using help
Enter a name for the item in the Presets input box.
Click the option you want to know on the Printing Preferences window and
press F1 on your keyboard.
13
Eco printing
The Eco function reduces toner consumption and paper usage. The Eco
function allows you to save print resources and lead you to eco-friendly printing.
3
Click
saved.
(Add). When you save Presets, all current driver settings are
Select more options and click
(Update), settings will be added to the
Presets you made. To use a saved setting, select it from the Presets dropdown list. The machine is now set to print according to the settings you
have selected.
If you press the Eco button from the control panel, eco mode is enabled. The
default setting of Eco mode is Double-sided printing (Long Edge), Multiple
Pages per Side (2), Skip blank pages, and Toner Save.
Depending on the printer driver you use, Skip blank pages may not work
properly. If Skip blank pages feature does not work properly, set the
feature from the Easy Eco Driver (see "Easy Eco Driver" on page 257).
To delete saved settings, select it from the Presets drop-down list and click
(Delete).
You can also restore the printer driver’s default settings by selecting
Default Preset from the Presets drop-down list.
2. Menu overview and basic setup
58
Basic printing
Setting Eco mode on the control panel
•
• The settings set from the machine’s driver override the settings on the
control panel.
3
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Change Template: Follow the settings from Syncthru™ Web Service.
Before you select this item, you must set the eco function in
SyncThru™ Web Service> Settings tab > Machine Settings >
System > Eco > Settings.
Press OK to save the selection.
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see the eco image (
means the eco mode is currently enabled.
), that
1
Select
(Menu) > System Setup > Machine Setup > Eco Settings on
the control panel.
2
Select the option you want and press OK.
Eco options
•
Default Mode: Select this to turn on or off the eco mode. (Duplex
(long edge)/Toner save/2-up/Skip blank pages)
•
Printer Default: Follows the settings from the machine's control panel.
•
None: Disables Eco mode.
-
Off: Set the eco mode off.
•
-
On: Set the eco mode on.
Eco Printing: Enables eco mode. Activate the various Eco items you want to
use.
•
Password: If the administrator has enabled Eco mode, you have to
If you set the eco mode on with a password from the SyncThru™ Web
Service (Settings tab > Machine Settings > System > Eco > Settings), the
On force message appears. You have to enter the password to change the
eco mode status.
enter the password to change the status.
2. Menu overview and basic setup
59
Basic printing
Result simulator
Result Simulator shows the results of reduced emission of carbon dioxide, used
electricity, and the amount of saved paper in accordance with the settings you
selected.
•
The results are calculated on the basis that the total number of printed
paper is one hundred without a blank page when the Eco mode is disabled.
•
Refers to the calculation coefficient about CO2, energy, and paper from IEA,
the index of Ministry of Internal Affairs and Communication of Japan and
www.remanufacturing.org.uk. Each model has a different index.
•
The power consumption in printing mode refers to the average printing
power consupmtion of this machine.
•
The actual saved or reduced amount may differ depending on the operating
system used, computing performance, application software, connection
method, media, media size, job complexity, etc.
2. Menu overview and basic setup
60
Basic copying
15
For special printing features, refer to the Advanced Guide (see "Copy menu"
on page 179).
Changing the settings for each copy
Your machine provides default settings for copying so that you can quickly and
easily make a copy. However, if you want to change the options for each copy,
use the copy function buttons on the control panel.
14
Basic copy
1
2
Select
(copy) on the control panel.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
If you want to customize the copy settings including Reduce/Enlarge,
Darkness, Contrast, Original, and more by using the control panel
buttons (see "Changing the settings for each copy" on page 61).
4
Enter the number of copies using the arrow or number keypad, if
necessary.
5
Press
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Darkness
(Start).
If you need to cancel the copying job during the operation, press
Clear) and the copying will stop.
• If you press
(Stop/Clear) while setting the copy options, all of the
options you have set for the current copy job will be canceled and
returned to their default status. Or, they will automatically return to their
default status after the machine completes the copy in progress.
If you have an original containing faint marking and dark images, you can adjust
the brightness to make a copy that is easier to read.
(Stop/
2. Menu overview and basic setup
61
Basic copying
1
Select
(copy) >
control panel.
(Menu) > Copy Feature > Darkness on the
Or select Darkness button on the control panel.
2
3
1
Select
(copy) >
control panel.
(Menu) > Copy Feature > Original type on the
2
Select the option you want and press OK.
Select the option you want and press OK.
•
Text: Use for originals containing mostly text.
For example, the Light+5 being the lightest, and the Dark+5 being the
darkest.
•
Text/Photo: Use for originals with mixed text and photographs.
Press
If texts in the printout is blurry, select Text to get the clear texts.
(Stop/Clear) to return to ready mode.
•
Contrast
The Contrast menu lets you increase or decrease the difference between the
bright and dark areas of an image.
3
Photo: Use when the originals are photographs.
Press
(Stop/Clear) to return to ready mode.
Reduced or enlarged copy
1
2
Select
(copy) >
control panel.
(Menu) > Copy Feature > Contrast on the
Select the option you want and press OK.
You can reduce or enlarge the size of a copied image from 25% to 400% when
you copy original documents from the scanner glass.
Select Dark to heighten the contrast and select Light to reduce it.
3
Press
(Stop/Clear) to return to ready mode.
• This feature may not be available depending on model or optional
goods (see "Variety feature" on page 10).
• If the machine set to Eco mode, reduce and enlarge features are not
available.
Original
The original setting is used to improve the copy quality by selecting the
document for the current copy job.
2. Menu overview and basic setup
62
Basic copying
To select from the predefined copy sizes
1
Select
(copy) >
the control panel.
(Menu) > Copy Feature > Reduce/Enlarge on
2
3
Select the option you want and press OK.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
Press
(Stop/Clear) to return to ready mode.
• For better image quality, Select
(copy) >
(Menu) > Copy
Feature > Original Type > Photo on the control panel.
To scale the copy by directly entering the scale rate
1
Select
(copy) >
(Menu) > Copy Feature > Reduce/Enlarge >
Custom on the control panel.
2
3
4
Enter the copy size you want using the numeric keypad.
Press OK to save the selection.
Press
1
Press ID Copy on the control panel.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
3
Place Front Side and Press [Start] appears on the display.
(Stop/Clear) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
16
ID card copying
Your machine can print 2-sided originals on one sheet.
2. Menu overview and basic setup
63
Basic copying
4
Press Start.
Your machine begins scanning the front side and shows Place Back Side
and Press [Start].
5
Turn the original over and place it on the scanner glass where arrows
indicate as shown. Then, close the scanner lid.
6
Press Start.
• If you do not press the
(Start) button, only the front side will be
copied.
• If the original is larger than the printable area, some portions may not be
printed.
2. Menu overview and basic setup
64
Basic scanning
For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 230).
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC Settings.
17
Basic Scanning
3
Select the application program you want and press OK.
Default setting is My Documents.
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
You can add or delete the folder where the scanned file is saved in
Samsung Easy Printer Manager >
Scan to PC Settings.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Switch to advanced mode. >
• if you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 238).
1
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Select
(scan) > Scan to PC > Local PC on the control panel.
4
5
Select the option you want and press OK.
Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
• Documents. The saved folder may differ, depending on your operating
system or the application you are using.
2. Menu overview and basic setup
65
Basic faxing
18
• This function is not supported for SCX-470X Series (see"Control panel
overview" on page 24).
Preparing to fax
• For special faxing features, refer to the Advanced Guide (See "Fax
features" on page 241).
• You cannot use this machine as a fax via the internet phone. For more
information ask your internet service provider.
• We recommend using traditional analog phone services (PSTN: Public
Switched Telephone Network) when connecting telephone lines to use
a fax machine. If you use other Internet services (DSL, ISDN, VolP), you can
improve the connection quality by using the Micro-filter. The Micro-filter
eliminates unnecessary noise signals and improves connection quality or
Internet quality. Since the DSL Micro-filter is not provided with the
machine, contact your Internet service provider for use on DSL Microfilter.
SCX-470x Series does not support the fax features.
Before you send or receive a fax, you need to connect the supplied line cord to
your telephone wall jack (see "Rear view" on page 23). Refer to the Quick
Installation Guide how to make a connection. The method of making a
telephone connection is different from one country to another.
19
Sending a fax
• When you place the originals, you can use either the document feeder or
the scanner glass. If the originals are placed on both the document
feeder and the scanner glass, the machine will read the originals on the
document feeder first, which has higher priority in scanning.
• SCX-470x Series does not support the fax features.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
(see "Rear view" on page 23).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
2
Select
• SCX-470x Series does not support the fax features.
(fax) on the control panel.
2. Menu overview and basic setup
66
Basic faxing
3
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 68).
3
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 68).
4
5
Enter the destination fax number.
4
5
6
Press On Hook Dial on the control panel or lift the handset.
Press
(Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
Enter a fax number using the number keypad on the control panel.
Press
(Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.
• If you want to send a fax directly from your computer, use Samsung
Network PC Fax (see "Sending a fax in the computer" on page 242).
• When you want to cancel a fax job, press
machine starts transmission.
(Stop/Clear) before the
• If you used the scanner glass, the machine shows the message asking to
place another page.
Sending a fax to multiple destinations
You can use the multiple send feature, which allows you to send a fax to multiple
locations. Originals are automatically stored in memory and sent to a remote
station. After transmission, the originals are automatically erased from memory
(see "Features by models" on page 7).
Sending a fax manually
Perform the following to send a fax using (On Hook Dial) on the control
panel. If your machine is a handset model, you can send a fax using the handset
(see "Features by models" on page 7).
1
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Select
You cannot send faxes with this feature if you chosen super fine as an option
or if the fax is in color.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
2
Select
(fax) on the control panel.
(fax) on the control panel.
2. Menu overview and basic setup
67
Basic faxing
3
Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 68).
4
5
Select
20
Receiving a fax
(Menu) > Fax Feature > Multi Send on the control panel.
SCX-470x Series does not support the fax features.
Enter the number of the first receiving fax machine and press OK.
You can press speed dial numbers or select a group dial number using
the
6
(Address book) button (see Advanced Guide).
Enter the second fax number and press OK.
Your machine is preset Fax mode at the factory. When you receive a fax, the
machine answers the call on a specified number of rings and automatically
receives the fax.
The display asks you to enter another fax number to send the document.
21
7
To enter more fax numbers, press OK when Yes appears and repeat
steps 5 and 6. You can add up to 10 destinations.
Once you have entered a group dial number, you cannot enter another
group dial number.
8
When you have finished entering fax numbers, select No at the Another
No.? prompt and press OK.
The machine begins sending the fax to the numbers you entered in the
order in which you entered them.
Adjusting the document settings
SCX-470x Series does not support the fax features.
Before starting a fax, change the following settings according to your original’s
status to get the best quality.
It may be necessary to press OK to navigate to lower-level menus for some
models.
2. Menu overview and basic setup
68
Basic faxing
Resolution
•
The default document settings produce good results when using typical textbased originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
1
Select
panel.
(fax) >
(Menu) > Fax Feature > Resolution on the control
2
Select the option you want and press OK.
•
Standard: Originals with normal sized characters.
•
Fine: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
•
Super Fine: Originals containing extremely fine detail. Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
Color Fax: Original with colors.
• Memory transmission is not available in this mode.
• You can only send a color fax if the machine you are communicating with
supports color fax reception and you send the fax manually.
3
Press
(Stop/Clear) to return to ready mode.
Darkness
You can select the degree of darkness of the original document.
The darkness setting is applied to the current fax job. To change the default
setting (see "Fax menu" on page 186).
1
Select
panel.
2
3
Select a darkness level you want.
• For memory transmission, Super Fine mode is not available. The
resolution setting is automatically changed to Fine.
• When your machine is set to Super Fine resolution and the fax machine
with which you are communicating does not support Super Fine
resolution, the machine transmits using the highest resolution mode
supported by the other fax machine.
•
Press
(fax) >
(Menu) > Fax Feature > Darkness on the control
(Stop/Clear) to return to ready mode.
Photo Fax: Originals containing shades of gray or photographs.
2. Menu overview and basic setup
69
3. Maintenance
This chapter provides information about purchasing supplies, accessories and maintenance parts available for your
machine.
• Ordering supplies and accessories
71
• Available supplies
72
• Available maintenance parts
73
• Redistributing toner
74
• Replacing the toner cartridge
75
• Monitoring the supplies life
77
• Setting the toner low alert
78
• Cleaning the machine
79
Ordering supplies and accessories
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and maintenance parts.
To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine.
You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service.
3. Maintenance
71
Available supplies
When supplies reach the end of their life spans, you can order the following s of
supplies for your machine:
Type
Standard yield toner
cartridge
High yield toner
cartridge
Average yielda
Part name
Approx. 1,500 pages
MLT-D103S
Approx. 2,500 pages
MLT-D103L
Samsung does not recommend using non-genuine Samsung toner
cartridge such as refilled or remanufactured toner. Samsung cannot
guarantee non-genuine Samsung toner cartridge's quality. Service or repair
required as a result of using non-genuine Samsung toner cartridges will not
be covered under the machine’s warranty.
a. Declared yield value in accordance with ISO/IEC 19752.
Depending on the options, percentage of image area and job mode used,
the toner cartridge’s lifespan may differ.
When purchasing new toner cartridges or other supplies, these must be
purchased in the same country as the machine you are using. Otherwise,
new toner cartridges or other supplies will be incompatible with your
machine due to different configurations of toner cartridges and other
supplies according to the specific country conditions.
3. Maintenance
72
Available maintenance parts
To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service
provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its
“Average yield”.
Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which
is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met.
Average yielda
Parts
Document feeder rubber pad
Approx. 20,000 pages
Transfer roller
Approx. 100,000 pages
Fuser unit
Approx. 50,000 pages
Pickup roller
Approx. 50,000 pages
Retard roller
Approx. 50,000 pages
Forward Roller
Approx. 50,000 pages
Feed Roller
Approx. 50,000 pages
a. It will be affected by the operating system used, computing performance, application software, connecting method, media, media size and job
complexity.
3. Maintenance
73
Redistributing toner
When the toner cartridge is near the end of its life:
•
White streaks or light printing occurs and/or density variation side to side.
•
The Status LED blinks red.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still
occur even after you have redistributed the toner.
If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water: hot water sets toner into fabric.
Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
3. Maintenance
74
Replacing the toner cartridge
Click this link to open an animation about solving power problems.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• Shake the toner cartridge thorougly, it will increase the initial print quality.
• Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
3. Maintenance
75
Replacing the toner cartridge
When a toner cartridge has reached the end of life, the machine will stop printing.
3. Maintenance
76
Monitoring the supplies life
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if
necessary.
It may be necessary to press OK to navigate to lower-level menus for some models.
1
2
3
Select
(Menu) > System Setup > Maintenance > Supplies Life on the control panel.
Select the option you want and press OK.
•
Supplies Info: Prints the supply information page.
•
Total: Displays the total number of pages printed.
•
ADF Scan: Displays the number of pages printed by using the document feeder.
•
Platen Scan: Displays the number of pages scanned by using scanner glass.
Press
(Stop/Clear) to return to ready mode.
3. Maintenance
77
Setting the toner low alert
If the amount of toner in the cartridge is low, a message or LED informing the user to change the toner cartridge appears. You can set the option for whether or not
this message or LED appears.
1
2
3
Select
(Menu) > System Setup > Maintenance > Toner Low Alert on the control panel.
Select the option you want.
Press OK to save the selection.
3. Maintenance
78
Cleaning the machine
If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing
condition and use your machine longer.
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the
cabinet.
• If your machine or the surrounding area is contaminated with toner, we recommend you use a cloth or tissue dampened with water to clean it. If you use a vacuum
cleaner, toner blows in the air and might be harmful to you.
• During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner
specks or smearing. Cleaning the inside of the machine clears and reduces these problems.
1
Cleaning the outside
Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.
3. Maintenance
79
Cleaning the machine
2
Cleaning the inside
• Use a dry lint-free cloth to clean the machine.
• If your machine has a power switch, turn the power switch off before cleaning the machine.
• Before opening the front cover, close the output support first.
3. Maintenance
80
Cleaning the machine
3
Cleaning the pickup roller
• Before opening the front cover, close the output support first.
• If your machine has a power switch, turn the power switch before cleaning the machine.
3. Maintenance
81
Cleaning the machine
3. Maintenance
82
Cleaning the machine
4
Cleaning the scan unit
Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day as needed.
1
2
3
Slightly dampen a soft, lint-free cloth or paper towel with water.
Lift and open the scanner lid.
Wipe the surface of the scanner glass until it is clean and dry.
1
2
3
4
4
Scanner lid
Scanner glass
Document feeder glass
White bar
Wipe the underside of the scanner lid and white sheet until it is clean and dry.
3. Maintenance
83
Cleaning the machine
5
Close the scanner lid.
3. Maintenance
84
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Tips for avoiding paper jams
86
• Clearing original document jams
87
• Clearing paper jams
91
• Understanding the status LED
96
• Understanding display messages
98
This chapter gives helpful information for what to do if you encounter an error. If your machine
has a display screen, check the message on the display screen first to solve the error.
If you cannot find a solution to your problem in this chapter, refer to the Troubleshooting
chapter in the Advanced User's Guide.
If you cannot find a solution in the User's Guide or the problem persists, call for service.
Tips for avoiding paper jams
By selecting the correct medias, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines:
•
Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 41).
•
Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray.
•
Do not remove paper from the tray while your machine is printing.
•
Flex, fan, and straighten paper before loading.
•
Do not use creased, damp, or highly curled paper.
•
Do not mix paper s in a tray.
•
Use only recommended print media (see "Print media specifications" on page 105).
4. Troubleshooting
86
Clearing original document jams
When an original document jams in the document feeder, a warning message appears on the display.
To avoid tearing the document, remove the jammed document slowly and carefully.
To prevent document jams, use the scanner glass for thick, thin or mixed paper- originals.
4. Troubleshooting
87
Clearing original document jams
1
Original paper jam in front of scanner
4. Troubleshooting
88
Clearing original document jams
2
Original paper jam inside of scanner
4. Troubleshooting
89
Clearing original document jams
3
Original paper jam in exit area of scanner
1
2
Remove any remaining pages from the document feeder.
Gently remove the jammed paper from the document feeder.
4. Troubleshooting
90
Clearing paper jams
To avoid tearing the paper, pull the jammed paper out slowly and gently.
4
In tray
Click this link to open an animation about solving power problems.
4. Troubleshooting
91
Clearing paper jams
5
In the manual tray
Click this link to open an animation about solving power problems.
4. Troubleshooting
92
Clearing paper jams
6
Inside the machine
Click this link to open an animation about solving power problems.
The fuser area is hot. Take care when removing paper from the machine.
4. Troubleshooting
93
Clearing paper jams
7
In the exit area
Click this link to open an animation about solving power problems.
4. Troubleshooting
94
Clearing paper jams
8
In the duplex unit area
Click this link to open an animation about solving power problems.
1
1
2
2
4. Troubleshooting
95
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country.
• To resolve the error, look at the error message and its instructions from the troubleshooting part.
• You also can resolve the error with the guideline from the computers’s Printing Status or Smart Panel program window.
• If the problem persists, call a service representative.
Status
Status LED
Description
Off
Green
The machine is off-line.
Blinking
On
Red
Blinking
When the backlight blinks, the machine is receiving or printing data.
• The machine is on-line and can be used.
• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When
the problem is cleared, the machine resumes. For some models that does not support the display screen on the
control panel, this feature is not applicable.
• Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for
replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner"
on page 74).
On
• A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to replace the toner cartridge
(see "Replacing the toner cartridge" on page 75).
• The cover is opened. Close the cover.
• There is no paper in the tray. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on
page 98).
4. Troubleshooting
96
Understanding the status LED
Status
WPS LEDb
Power
Blue
On
When the machine is connected to a wireless network, WPS LED lights on blue.
Blue
On
The machine is in power save mode.
Off
The machine is in ready mode or machine’s power is off.
On
Eco mode is on. Duplex, 2-up, toner save on, skip blank page feature will automatically be applied when printing (see"Eco
printing" on page 58).
Off
Eco mode is off.
LED
Eco button
Description
Green
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages
may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size. Some amount of toner may remain in the cartridge even when red LED is
on and the printer stops printing.
b. SCX-472x Series only.
4. Troubleshooting
97
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status
or errors. Refer to the tables below to understand the messages’ and their
meaning, and correct the problem, if necessary.
Message
Meaning
Suggested solutions
• Paper Jam
in Manual Feeder
Paper has jammed in
the manual feeder.
Clear the jam (see "In the
manual tray" on page
92).
• Paper Jam
inside machine
Paper has jammed in
the inside machine.
Clear the jam (see "Inside
the machine" on page
93).
• Some messages may not appear on the display depending on the
options or models.
• Paper Jam
in exit area
Paper has jammed in
the paper exit area.
Clear the jam (see "In the
exit area" on page 94).
• [error number] indicates the error number.
• Paper Jam
bottom of duplex
Paper has jammed in
the duplex area.
Clear the jam (see "In the
duplex unit area" on
page 95).
• If a message is not in the table, reboot the power and try the printing job
again. If the problem persists, call a service representative.
• When you call for service, provide the service representative with the
contents of display message.
• [tray type] indicates the tray number.
• Paper Jam top of duplex
9
Paper Jam-related messages
Message
Meaning
Suggested solutions
• Document jam
Remove jam
The loaded original
document has
jammed in the
document feeder.
Clear the jam (see
"Clearing original
document jams" on
page 87).
• Paper Jam
in tray
Paper has jammed in
the paper feed area.
Clear the jam (see "In
tray" on page 91).
4. Troubleshooting
98
Understanding display messages
10
Toner-related messages
Message
Meaning
Suggested solutions
• Install Toner Cartridge
A toner cartridge is not installed.
Install a toner cartridge.
• Not Compatible
Toner cartridge
The toner cartridge you have installed is not for your machine.
Install a Samsung-genuine toner cartridge, designed for your
machine.
• Prepare new cartridge
Small amount of toner is left in the indicated cartridge. The
estimated cartridge life of toner is close.
Prepare a new cartridge for a replacement. You may temporarily
increase the printing quality by redistributing the toner (see
"Redistributing toner" on page 74).
4. Troubleshooting
99
Understanding display messages
Message
• Replace new cartridge
• Toner Exhausted
Meaning
A toner cartridge has reached its estimated cartridge life. The
machine stops printing.
Estimated cartridge life means the expected or
estimated toner cartridge life, which indicates the
average capacity of print-outs and is designed pursuant
to ISO/IEC 19752 (see "Available supplies" on page 72).
The number of pages may be affected by operating
environment, percentage of image area, printing
interval, media, percentage of image area, and media
size. Some amount of toner may remain in the cartridge
even when replace new cartridge appears and the
machine stops printing.
Suggested solutions
• You can choose Stop or Continue as shown on the control panel.
If you select Stop, the printer stops printing and you cannot print
any more without changing the cartridge. If you select Continue,
the printer keeps printing but the printing quality cannot be
guaranteed.
• Replace the toner cartridge for the best print quality when this
message appears. Using a cartridge beyond this stage can result in
printing quality issues (see "Replacing the toner cartridge" on
page 75).
Samsung does not recommend using a non-genuine
Samsung toner cartridge such as refilled or remanufactured.
Samsung cannot guarantee a non-genuine Samsung toner
cartridge's quality. Service or repair required as a result of
using non-genuine Samsung toner cartridges will not be
covered under the machine warranty.
• If the machine stops printing, replace the toner cartridge (see
"Replacing the toner cartridge" on page 75).
4. Troubleshooting
100
Understanding display messages
11
Message
Tray-related messages
• Wireless
Network Error
Message
Meaning
Meaning
Wireless module is not
installed.
Suggested solutions
Call for service.
Suggested solutions
13
• Output bin full
Remove paper
The output tray is full.
Remove papers from the
output tray, the printer
resumes printing.
• Paper Empty
in [tray type]
There is no paper in tray
or manual feeder.
Load paper in tray (see
"Loading paper in the
tray" on page 43, "Loading
paper in the tray" on page
43).
• Tray Paper
mismatch
• Manual Paper
mismatch
The paper size specified
in the printer properties
does not match the
paper you are loading.
Load the required size
paper.
12
Misc. messages
Message
Meaning
• Door of scanner is
open
The document feeder
cover is not securely
latched.
Close the cover until it
locks into place.
• Error [error
number]
Turn off then on
The machine unit cannot
be controlled.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
• Memory Full
Remove Job
The memory is full.
Print or remove the
received fax job in Secure
Receive (see Advanced
Guide).
• Scanner Locked
The scanner is locked.
Reboot the power. If the
problem persists, please
call for service.
Network-related messages
Message
• Network Problem:
IP Conflict
Meaning
Suggested solutions
The network IP address
you have set is being
used by someone else.
Check the IP address and
reset it if necessary (see
Advanced Guide).
Suggested solutions
4. Troubleshooting
101
5. Appendix
This chapter provides product specifications and information concerning applicable regulations.
• Specifications
103
• Regulatory information
113
• Copyright
126
Specifications
1
General specifications
The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information.
Items
Description
Dimensiona
Width x Length x Height
406 x 338 x 384mm (15.98 x 13.30 x 15.12 inches)
Weighta
Machine with consumables
10.98 Kg
Noise Levelb
Ready mode
26 dB (A)
Print mode
Less than 50 dB (A)
Copy mode
Less than 53 dB (A)
Scan mode (scanner glass)
52 dB (A)
Scan mode (document feeder)
53 dB (A)
Operation
10 to 32°C (50 to 89.6°F)
Storage (packed)
-20 to 40°C (-4 to 104°F)
Operation
20 to 80% RH
Storage (packed)
10 to 90% RH
110 volt models
AC 110 - 127 V
220 volt models
AC 220 - 240 V
Temperature
Humidity
Power ratingc
5. Appendix
103
Specifications
Items
Power consumption
Wirelesse
a.
b.
c.
d.
e.
Description
Average operating mode
Less than 400W
Ready mode
Less than 50 W
Power save mode
Less than 3.0 W
Power off mode
Less than 0.2 W (0.1 Wd)
Module
T77H262
Dimensions and weight are measured without a handset.
Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine.
For the machine that has a power switch.
Wireless models only (see "Features by models" on page 7).
5. Appendix
104
Specifications
2
Print media specifications
Print media weight/Capacitya
Type
Size
Dimensions
Manual feederb
Tray
Letter
216 x 279 mm (8.5 x 11 inches)
60 to 163 g/m2 (16 to 43 lbs bond)
Legal
216 x 356 mm (8.5 x 14 inches)
• 250 sheets of 80 g/m2 (21 lbs bond)
US Folio
216 x 330 mm (8.5 x 13 inches)
A4
210 x 297 mm (8.27 x 11.69 inches)
Oficio
216 x 343 mm (8.5 x 13.5 inches)
JIS B5
182 x 257 mm (7.17 x 10.12 inches)
ISO B5
176 x 250 mm (6.93 x 9.84 inches)
Executive
184 x 267 mm (7.25 x 10.5 inches)
A5
148 x 210 mm (5.83 x 8.27 inches)
A6
105 x 148 mm (4.13 x 5.83 inches)
60 to 220 g/m2 (16 to 59 lbs
bond)
•
1 sheet of 80 g/m2 (21 lbs
bond)
Plain paper
5. Appendix
105
Specifications
Print media weight/Capacitya
Type
Size
Dimensions
Tray
Envelope
Monarch
98 x 191 mm (3.87 x 7.5 inches)
Envelope No. 10
105 x 241 mm (4.12 x 9.5 inches)
Envelope DL
110 x 220 mm (4.33 x 8.66 inches)
Envelope C5
162 x 229 mm (6.38 x 9.02 inches)
Envelope C6
114 x 162 mm (4.49 x 6.38 inches)
Thick paper
Refer to the Plain
paper section
Thicker paper
Manual feederb
Not available in tray
60 to 220 g/m2 (16 to 59 lbs
bond)
Refer to the Plain paper section
91 to 105 g/m2 (24 to 28 lbs bond)
91 to 105 g/m2 (24 to 28 lbs
bond)
Refer to the Plain
paper section
Refer to the Plain paper section
Not available in tray
164 to 220 g/m2 (44 to 59 lbs
bond)
Thin paper
Refer to the Plain
paper section
Refer to the Plain paper section
60 to 70 g/m2 (16 to 19 lbs bond)
60 to 70 g/m2 (16 to 19 lbs bond)
Transparency
Letter, A4
Refer to the Plain paper section
Not available in tray
138 to 146 g/m2 (37 to 39 lbs
bond)
Refer to the Plain paper section
Not available in tray
Labelsc
Letter, Legal, US
Folio, A4, JIS B5,
ISO B5,
Executive, A5
120 to 150 g/m2 (32 to 40 lbs
bond)
Envelope
5. Appendix
106
Specifications
Print media weight/Capacitya
Type
Size
Dimensions
Tray
Card stock
Letter, Legal, US
Folio, A4, JIS B5,
ISO B5,
Executive, A5,
Manual feederb
Refer to the Plain paper section
121 to 163 g/m2 (32 to 43 lbs bond)
121 to 163 g/m2 (32 to 43 lbs
bond)
Refer to the Plain paper section
106 to 120 g/m2 (28 to 32 lbs bond)
106 to 120 g/m2 (28 to 32 lbs
bond)
Postcard 4x6
Bond paper
Refer to the Plain
paper section
Minimum size (custom)
• Manual feeder: 76 x 127 mm (3 x 5 inches) 60 to 163 g/m2 (16 to 43 lbs bond) d, e
• Tray: 105 x 148.5 mm (4.13 x 5.85 inches)
Maximum size (custom)
216 x 356 mm (8.5 x 14 inches)
a.
b.
c.
d.
e.
Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
1 sheet for manual feeder.
The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.
The paper types available in the manual feeder: Plan, Thick, Thicker, Thin, Cotton, Colored, Pre-printed, Recycled, Envelope, Transparency, Labels, Cardstock, Bond, Archive
The paper types available in tray: Plan, Thick, Thin, Recycled, Cardstock, Bond, Archive
5. Appendix
107
Specifications
3
System requirements
Microsoft® Windows®
Requirement (recommended)
Operating system
CPU
RAM
free HDD space
Windows® 2000
Intel® Pentium® II 400 MHz (Pentium III 933 MHz)
64 MB (128 MB)
600 MB
Windows® XP
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (256 MB)
1.5 GB
Windows Server® 2003
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (512 MB)
1.25 GB to 2 GB
Windows Server® 2008
Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)
512 MB (2 GB)
10 GB
Windows Vista®
Intel® Pentium® IV 3 GHz
512 MB (1 GB)
15 GB
Windows® 7
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
512 MB (2 GB)
10 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2008 R2
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
5. Appendix
108
Specifications
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with your machine.
• For Windows 2000, Services Pack 4 or higher is required.
Macintosh
Requirements (Recommended)
Operating system
CPU
Mac OS X 10.4
• Intel® processors
• PowerPC G4/G5
RAM
• 128 MB for a powerPC based Mac
(512 MB)
Free HDD space
1 GB
• 512 MB for an Intel-based Mac (1 GB)
Mac OS X 10.5
• Intel® processors
512 MB (1 GB)
1 GB
• 867 MHz or faster Power PC G4/
G5
Mac OS X 10.6
• Intel® processors
1 GB (2 GB)
1 GB
Mac OS X 10.7
• Intel® processors
2 GB
4 GB
5. Appendix
109
Specifications
Linux
Items
Operating system
Requirements
Redhat® Enterprise Linux WS 4, 5 (32/64 bit)
Fedora 5 ~ 13 (32/64 bit)
SuSE Linux 10.1 (32 bit)
OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32/64 bit)
Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
Debian 4.0, 5.0 (32/64 bit)
CPU
Pentium IV 2.4GHz (Intel Core™2)
RAM
512 MB (1 GB)
Free HDD space
1 GB (2 GB)
Unix
Items
Operating system
Requirements
Sun Solaris 9, 10 (x86, SPARC)
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
IBM AIX 5.1, 5.2, 5.3, 5.4
5. Appendix
110
Specifications
Items
Free HDD space
Requirements
Up to 100 MB
4
Network environment
Network and wireless models only (see "Features by models" on page 7).
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the
machine.
Items
Network interface
Specifications
• Ethernet 10/100 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN (SCX-472x Series only)
Network operating system
• Windows 2000/Server 2003 /Server 2008/XP/Vista/7/Server 2008 R2
• Various Linux OS
• Mac OS X 10.4 ~ 10.7
• Unix
5. Appendix
111
Specifications
Items
Network protocols
Specifications
• TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
Wireless security
• Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)
• Encryption: WEP64, WEP128, TKIP, AES
5. Appendix
112
Regulatory information
This machine is designed for a normal work environment and certified with
several regulatory statements.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
5
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC 608251 : 2007.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above
a Class I level during normal operation, user maintenance or prescribed service
condition.
6
Warning
Never operate or service the printer with the protective cover removed from
laser/scanner assembly. The reflected beam, although invisible, can damage
your eyes.
Ozone safety
This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.
5. Appendix
113
Regulatory information
7
9
Mercury Safety
Recycling
Contains Mercury, Dispose According to Local, State or Federal
Laws.(U.S.A. only)
Recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
8
Power saver
10
China only
This printer contains advanced energy conservation technology
that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of
time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S.
marks.
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be
on your machine. Check if your machine is ENERGY STAR
certified.
5. Appendix
114
Regulatory information
11
Correct disposal of this product (Waste electrical &
electronic equipment)
(Applicable in the european union and other
european countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these
items from other s of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
(The United States of America only)
Dispose unwanted electronics through an approved recycler. To find the nearest
recycling location, go to our website: www.samsung.com/recyclingdirect Or
call, (877) 278 - 0799
12
Correct disposal of batteries in this product
(Applicable in the European Union and other
European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment. To protect
natural resources and to promote material reuse, please separate
batteries from other s of waste and recycle them through your local,
free battery return system.
5. Appendix
115
Regulatory information
13
Taiwan only
14
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
5. Appendix
116
Regulatory information
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and
Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme sur le
matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et
Sciences Canada.
15
The FCC has set a general guideline of 20 cm (8 inches) separation between the
device and the body, for use of a wireless device near the body (this does not
include extremities). This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on. The power output of the wireless
device (or devices), which may be embedded in your printer, is well below the
RF exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
United States of America
Federal Communications Commission (FCC)
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it.
Contact manufacturer for service.
Intentional emitter per FCC Part 15
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
5. Appendix
117
Regulatory information
FCC Statement for Wireless LAN use:
17
Germany only
While installing and operating this transmitter and antenna combination
the radio frequency exposure limit of 1m W/cm2 may be exceeded at
distances close to the antenna installed. Therefore, the user must maintain
a minimum distance of 20cm from the antenna at all times. This device
cannot be colocated with another transmitter and transmitting antenna.
18
Turkey only
16
Russia only
19
Canada only
This product meets the applicable Industry Canada technical specifications. / Le
present materiel est conforme aux specifications techniques applicables
d’Industrie Canada.
5. Appendix
118
Regulatory information
The Ringer Equivalence Number (REN) is an indication of the maximum number
of devices allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five. / L’indice
d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de
terminaux qui peuvent etre raccordes a une interface telephonique. La
terminaison d’une interface peut consister en une combinaison quelconque de
dispositifs, a la seule condition que la somme d’indices d’equivalence de la
sonnerie de tous les dispositifs n’excede pas cinq.
The Telephone Company may make changes in its communications facilities,
equipment operations or procedures where such action is reasonably required
in the operation of its business and is not inconsistent with the rules and
regulations in FCC Part 68. If such changes can be reasonably expected to render
any customer terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such terminal
equipment, or otherwise materially affect its use or performance, the customer
shall be given adequate notice in writing, to allow the customer an opportunity
to maintain uninterrupted service
20
21
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone facsimile machine unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the first page of the
transmission the following information:
1 the date and time of transmission
2 identification of either business, business entity or individual sending the
message; and
3 telephone number of either the sending machine, business, business entity
or individual.
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this machine
may be found on the label located on the bottom or rear of the machine. In some
instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed
on the telephone line, and is useful for determining whether you have
“overloaded” the line. Installing several s of equipment on the same telephone
line may result in problems making and receiving telephone calls, especially
ringing when your line is called. The sum of all Ringer Equivalence Numbers of
the equipment on your telephone line should be less than five in order to assure
proper service from the telephone company. In some cases, a sum of five may
not be usable on your line. If any of your telephone equipment is not operating
properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.
5. Appendix
119
Regulatory information
The equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear of this equipment is a label that contains,
among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
FCC Regulations state that changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to
operate this equipment. In the event that terminal equipment causes harm
to the telephone network, the telephone company should notify the
customer that service may be stopped. However, where prior notice is
impractical, the company may temporarily cease service, providing that
they:
a promptly notify the customer.
b give the customer an opportunity to correct the equipment problem.
c inform the customer of the right to bring a complaint to the Federal
Communication Commission pursuant to procedures set out in FCC
Rules and Regulations Subpart E of Part 68.
You should also know that:
•
Your machine is not designed to be connected to a digital PBX system.
•
If you intend to use a computer modem or fax modem on the same phone
line as your machine, you may experience transmission and reception
problems with all the equipment. It is recommended that no other
equipment, except for a regular telephone, share the line with your
machine.
•
If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for both the power and the
telephone lines. Surge protectors can be purchased from your dealer or
telephone and electronic specialty stores.
•
When programming emergency numbers and/or making test calls to
emergency numbers, use a non-emergency number to advise the
emergency service dispatcher of your intentions. The dispatcher will give
you further instructions on how to actually test the emergency number.
•
This machine may not be used on coin service or party lines.
•
This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of
a standard modular jack, USOC RJ-11C.
22
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug
and has a 13 amp fuse. When you change or examine the fuse, you must re-fit
the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost
the fuse cover, do not use the plug until you have another fuse cover.
Contact the people from you purchased the machine.
5. Appendix
120
Regulatory information
The 13 amp plug is the most widely used in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug
sockets. You need to buy a suitable plug adaptor. Do not remove the moulded
plug.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
23
If you cut off the moulded plug, get rid of it straight away.
Declaration of conformity (European countries)
You cannot rewire the plug and you may receive an electric shock if you
plug it into a socket.
Approvals and Certifications
Important warning:
You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter “E”
or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
Hereby, Samsung Electronics, declares that this [SCX-470xND Series]
is incompliance with the essential requirements and other
relevantprovisions of Low Voltage Directive (2006/95/EC), EMC
Directive (2004/108/EC).
Hereby, Samsung Electronics, declares that this [SCX-472xFW Series,
SCX-472xHW Series, SCX-472xFD Series, SCX-472xHD Series, SCX472xHN Series, SCX-470xDN Series] is in compliance with the
essential requirements and other relevant provisions of R&TTE
Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.samsung.com, go to Support > Download center and enter
your printer (MFP) name to browse the EuDoC.
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
the member states related to low voltage equipment.
January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of
the Member States related to electromagnetic compatibility.
5. Appendix
121
Regulatory information
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity. A full declaration, defining the relevant Directives and referenced
standards can be obtained from your Samsung Electronics Co., Ltd.
representative.
EC Certification
European radio approval information (for products
fitted with EU-approved radio devices)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz band, may be present
(embedded) in your printer system which is intended for home or office use. This
section is only applicable if these devices are present. Refer to the system label
to verify the presence of wireless devices.
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal
Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European
single terminal connection to the analogue public switched telephone network
(PSTN) in accordance with Directive 1999/5/EC. The product has been designed
to work with the national PSTNs and compatible PBXs of the European
countries:
In the event of problems, you should contact the Euro QA Lab of Samsung
Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application
of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document
(EG 201 121) which contains notes and additional requirements to ensure
network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained
in this document.
Wireless devices that may be in your system are only
qualified for use in the European Union or associated
areas if a CE mark with a Notified Body Registration
Number and the Alert Symbol is on the system label.
The power output of the wireless device or devices that may be embedded in
you printer is well below the RF exposure limits as set by the European
Commission through the R&TTE directive.
European states qualified under wireless approvals:
EU countries
European states with restrictions on use:
EU
In France, the frequency range is restricted to 2454-2483.5 MHz for devices
above 10 mW transmitting power such as wireless
EEA/EFTA countries
5. Appendix
122
Regulatory information
No limitations at this time
24
Israel only
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as known at this time. Because
the wireless devices (which may be embedded into your printer) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe for use.
Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm (8
inches) from the body when wireless devices are on and transmitting.
25
Regulatory compliance statements
Wireless guidance
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in
the specific country sections (or country group sections). The wireless devices in
your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the
wireless device in, is not listed, contact your local Radio Approval agency for
requirements. Wireless devices are closely regulated and use may not be
allowed.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed below:
Radio frequency wireless communication can interfere with equipment
on commercial aircraft. Current aviation regulations require wireless
devices to be turned off while traveling in an airplane. IEEE 802.11 (also
known as wireless Ethernet) and Bluetooth communication devices are
examples of devices that provide wireless communication.
5. Appendix
123
Regulatory information
In environments where the risk of interference to other devices or
services is harmful or perceived as harmful, the option to use a wireless
device may be restricted or eliminated. Airports, Hospitals, and Oxygen
or flammable gas laden atmospheres are limited examples where use of
wireless devices may be restricted or eliminated. When in environments
where you are uncertain of the sanction to use wireless devices, ask the
applicable authority for authorization prior to use or turning on the
wireless device.
Every country has different restrictions on the use of wireless devices.
Since your system is equipped with a wireless device, when traveling
between countries with your system, check with the local Radio
Approval authorities prior to any move or trip for any restrictions on the
use of a wireless device in the destination country.
If your system came equipped with an internal embedded wireless
device, do not operate the wireless device unless all covers and shields
are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any
way. Modification to a wireless device will void the authorization to use
it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be
used. See the manufacturer System Restoration Kit, or contact
manufacturer Technical Support for additional information.
5. Appendix
124
Regulatory information
26
China only
5. Appendix
125
Copyright
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•
Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•
Microsoft, Windows, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft Corporation.
•
True, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc.
•
All other brand or product names are trademarks of their respective companies or organizations.
Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.
REV. 1.1
5. Appendix
126
User’s Guide
SCX-472x Series
SCX-470x Series
ADVANCED
ADVANCED
This guide provides information about installation, advanced configuration,
operation and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
This guide provides information concerning installation, basic operation and troubleshooting
on windows.
ADVANCED
1. Software Installation
Installation for Macintosh
131
Reinstallation for Macintosh
132
Installation for Linux
133
Reinstallation for Linux
135
2. Using a Network-Connected
Machine
Useful network programs
137
Wired network setup
138
Installing driver over the network
141
IPv6 configuration
150
Wireless network setup
153
Scan menu
190
System setup
192
Admin setup
204
Custom setup
205
4. Special Features
Altitude adjustment
207
Storing email address
208
Entering various characters
210
Setting up the fax address book
211
Registering authorized users
214
Printing features
215
Scan features
230
Fax features
241
Using shared folder features
252
Using memory/hard drive features
253
3. Useful Setting Menus
Before you begin reading a chapter
177
Print menu
178
Copy menu
179
Fax menu
186
5. Useful Management Tools
Easy Capture Manager
255
Samsung AnyWeb Print
256
Easy Eco Driver
257
128
ADVANCED
Using SyncThru™ Web Service
258
Using Samsung Easy Printer Manager
261
Using Samsung Printer Status
264
Using Smart Panel
266
Using the Linux Unified Driver Configurator 268
6. Troubleshooting
Paper feeding problems
273
Power and cable connecting problems
274
Printing problems
275
Printing quality problems
279
Copying problems
287
Scanning problems
288
Faxing problems
290
Operating system problems
292
129
1. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using
the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network
connected machine’s driver (see "Installing driver over the network" on page 141).
• Installation for Macintosh
131
• Reinstallation for Macintosh
132
• Installation for Linux
133
• Reinstallation for Linux
135
• If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see
"Installing the driver locally" on page 28).
• Only use a USB cable no longer then 3 meter (118 inches).
Installation for Macintosh
1
2
3
4
5
6
7
8
9
10
Make sure that the machine is connected to your computer and
powered on.
14
Open the Applications folder > Utilities > Print Setup Utility.
•
Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
15
Click Add on the Printer List.
•
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
16
Click Agree to agree to the license agreement.
17
For Mac OS X 10.5 -10.7, click the “+” folder icon; a display window
will pop up.
Click Default Browser and find the USB connection.
•
Read the license agreement and click Continue.
For Mac OS X 10.5 -10.7, open the Applications folder > System
Preferences and click Print & Fax.
For Mac OS X 10.5-10.7, click Default and find the USB connection.
For Mac OS X 10.4, if Auto Select does not work properly, select Samsung
in Print Using and your machine name in Model.
When the message that warns that all applications will close on your
computer appears, click Continue.
•
Click Continue on the User Options Pane.
Your machine appears on the Printer List, and is set as the default
machine.
Click Install. All components necessary for machine operations will be
installed.
18
For Mac OS X 10.5-10.7, if Auto Select does not work properly, select
Select a driver to use... and your machine name in Print Using.
Click Add.
If you click Customize, you can choose individual components to install.
To install the fax driver:
11
12
Enter the password and click OK.
13
After the installation is finished, click Restart.
Installing software requires you to restart your computer. Click Continue
Installation.
a Open the Applications folder > Samsung > Fax Queue Creator.
b Your machine appears on the Printer List
c Select machine to use and click Create button
1. Software Installation
131
Reinstallation for Macintosh
If the printer driver does not work properly, uninstall the driver and reinstall it.
1
Make sure that the machine is connected to your computer and
powered on.
2
3
4
5
6
Insert the supplied software CD into your CD-ROM drive.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Uninstaller OS X icon.
Enter the password and click OK.
When the uninstall is done, click OK.
If a machine has already been added, delete it from the Print Setup Utility
or Print & Fax.
1. Software Installation
132
Installation for Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
1
The installation program added the Unified Driver Configurator desktop icon
and the Unified Driver group to the system menu for your convenience. If you
have any difficulties, consult the on-screen help that is available through your
system menu or from the driver package Windows applications, such as Unified
Driver Configurator or Image Manager.
Installing the Unified Linux Driver
2
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type “root” in the
Login field and enter the system password.
Installing the Smart Panel
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type in root in the
Login field and enter the system password.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
3
From the Samsung website, download the Unified Linux Driver package
to your computer.
4
5
6
7
Right-click the Unified Linux Driver package and extract the package.
Double click cdroot > autorun.
When the welcome screen appears, click Next.
3
From the Samsung website, download the Smart Panel package to your
computer.
4
5
Right-click the Smart Panel package and extract the package.
Double click cdroot > Linux > smartpanel > install.sh.
When the installation is complete, click Finish.
1. Software Installation
133
Installation for Linux
3
Installing the Printer Settings Utility
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type “root” in the
Login field and enter the system password.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
3
From the Samsung website, download the Printer Settings Utility
package to your computer.
4
Right-click the Printer Settings Utility package and extract the
package.
5
Double click cdroot > Linux > psu > install.sh.
1. Software Installation
134
Reinstallation for Linux
If the printer driver does not work properly, uninstall the driver and reinstall it.
1
Make sure that the machine is connected to your computer and
powered on.
2
When the Administrator Login window appears, type “root” in the
Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer driver. If you
are not a super user, ask your system administrator.
3
Click the icon at the bottom of the desktop. When the Terminal screen
appears, type in the following.
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninstall]#./uninstall.sh
4
5
6
Click Uninstall.
Click Next.
Click Finish.
1. Software Installation
135
2. Using a NetworkConnected Machine
This chapter gives you step-by-step instructions for setting up a network connected machine and software.
• Useful network programs
137
• Wired network setup
138
• Installing driver over the network
141
• IPv6 configuration
150
• Wireless network setup
153
Supported optional devices and features may differ according to your model (see "Features by
models" on page 7).
Useful network programs
There are several programs available to setup the network settings easily in a
network environment. For the network administrator especially, managing
several machines on the network is possible.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
2
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate internet access.
•
Download this program from http://solution.samsungprinter.com.
1
3
SyncThru™ Web Service
The web server embedded on your network machine allows you to do the
following tasks (see "Using SyncThru™ Web Service" on page 258).
•
Check the supplies information and status.
•
Customize machine settings.
•
Set the email notification option. When you set this option, the machine
status (toner cartridge shortage or machine error) will be sent to a certain
person's email automatically.
•
Configure the network parameters necessary for the machine to connect to
various network environments.
SetIP wired network setup
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
•
See "IPv4 configuration using SetIP (Windows)" on page 138.
•
See "IPv4 configuration using SetIP (Macintosh)" on page 139.
•
See "IPv4 configuration using SetIP (Linux)" on page 140.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 23).
• TCP/IPv6 is not supported by this program.
2. Using a Network-Connected Machine
137
Wired network setup
4
5
Printing a network configuration report
Setting IP address
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 23).
• TCP/IPv6 is not supported by this program.
•
The machine has the display screen: Press the
(Menu) button on the
control panel and select Network > Network Config. (Network
Configuration).
•
The machine has the touch screen: Press Setup from the Main screen >
Network > Next > Network Configuration.
•
The machine does not have the display screen: Press the
(Cancel or
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Stop/Clear) button for more than 4~5 seconds on the control panel.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 192.0.0.192
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
1
Install this program from the supplied CD-ROM by double-click
Application > SetIP > Setup.exe.
2
3
4
5
Follow the instructions in the installation window.
Connect your machine to the network with a network cable.
Turn on the machine.
From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
2. Using a Network-Connected Machine
138
Wired network setup
6
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
7
Enter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this information
assigned by a network manager before proceeding.
IPv4 configuration using SetIP (Macintosh)
Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 138) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8
1
2
Connect your machine to the network with a network cable.
3
Double-click the file and Safari will automatically open, then select
Trust. The browser will open the SetIPapplet.html page that shows the
printer’s name and IP address information.
4
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
5
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Insert the Installation CD-ROM, and open the disk window, select
MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
2. Using a Network-Connected Machine
139
Wired network setup
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 138) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
6
7
Select Apply, then OK, and OK again.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 138) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
5
The machine will automatically print the Network Configuration
Report.
Quit Safari.
IPv4 configuration using SetIP (Linux)
Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
The following instructions may vary from your model or operating systems.
1
2
3
4
Open /opt/Samsung/mfp/share/utils/.
Double-click the SetIPApplet.html file.
Click to open the TCP/IP configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
2. Using a Network-Connected Machine
140
Installing driver over the network
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
3
Select Install Now.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 23).
6
Windows
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 138).
If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
• The Custom Installation allows you to select the machine’s connection
and choose individual components to install. Follow the instructions on
the window.
• SCX-470x Series does not support the Wireless Setting and Installation
menu.
4
Read License Agreement, and select I accept the terms of the License
Agreement. Then, click Next.
The program searches for the machine.
2. Using a Network-Connected Machine
141
Installing driver over the network
If your machine is not found on the network or locally, an error message
appears. Select the option you want and click Next.
5
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
The searched machines will be shown on the screen. Select the one you
wish to use and click OK.
Command- line
/s or
If the driver searched only one machine, the confirmation window appears.
6
Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Definition
Starts silent installation.
Installs machine drivers
without prompting any UIs or
user intervention.
Specifies printer port.
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port name.
/S
/p”<port name>” or
Description
/P”<port name>”
Network Port will be
created by use of
Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
For example:
•
/p”xxx.xxx.xxx.xxx” in
where, “xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”
Following table shows commands that can be used in the command window.
2. Using a Network-Connected Machine
142
Installing driver over the network
Command- line
/a”<dest_path>” or
/A”<dest_path>”
Definition
Specifies destination path
for installation.
The destination
path should be a
fully qualified path.
/i”<script filename>” Specifies customized install
or
script file for custom
/I”<script filename>” operation.
The script filename
should be a fully
qualified filename.
Description
Command- line
Definition
Description
Since machine drivers should
be installed on the OS specific
location, this command
applies to only application
software.
/n”<Printer name>”
or
Specifies printer name.
Printer instance shall be
created as specified printer
name.
With this parameter, you can
add printer instances as your
wishes.
Commands not to set the
installed driver as a default
machine driver.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers installed.
If there is no installed
machine driver on your
system, then this option
won’t be applied because
Windows OS will set installed
printer driver as a default
machine driver.
Uses existing machine
driver files to create printer
instance if it is already
installed.
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional driver.
/N”<Printer name>”
/nd or
/ND
Customized script file can be
assigned for customized
silent installation. This script
file can be created or
modified through provided
installer customizing utility or
by text editor.
This customized
script file is prior than
default installer
setting in setup
package but not prior
than command-line
parameters.
/x or
/X
2. Using a Network-Connected Machine
143
Installing driver over the network
Command- line
/up”<printer
name>” or
/UP”<printer
name>”
/d or
/D
Definition
Description
Removes only specified
printer instance and not the
driver files.
This command provides a
way to remove only specified
printer instance from your
system without effecting
other printer drivers. It will
not remove printer driver files
from your system.
Uninstalls all device drivers
and applications from your
system.
/v”<share name>” or Shares installed machine
and add other available
/V”<share name>”
platform drivers for Point &
Print.
/o or
/O
/f”<log filename>”
or
/F”<log filename>”
Opens Printers and Faxes
folder after installation.
Specifies log filename.
The default log file is
created in the system temp
folder if not specified.
This command will remove all
installed device drivers and
application software from
your system.
It will install all supported
Windows OS platform’s
machine drivers to system
and share it with specified
<share name> for point and
print.
This command will open
Printers and Faxes folder
after the silent installation.
It will create a log file to a
specified folder.
Command- line
/h, /H or /?
Definition
Description
Shows Command-line Usage.
7
Macintosh
1
Make sure that the machine is connected to your network and powered
on.
2
3
4
5
6
7
8
Insert the supplied software CD into your CD-ROM drive.
9
Click Continue on the User Options Pane.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
When the message which warns that all applications will close on your
computer appears, click Continue.
2. Using a Network-Connected Machine
144
Installing driver over the network
If you have not set the IP address yet, click Set IP address and refer to "IPv4
configuration using SetIP (Macintosh)" on page 139. If you want to set the
wireless setting, refer to "Setup using Macintosh" on page 165.
10
Click Install. All components necessary for machine operations will be
installed.
When printing a document containing many pages, printing performance
may be enhanced by choosing Socket for Printer Type option.
18
19
Enter the machine’s IP address in the Address input field.
20
For Mac OS X 10.4, if Auto Select does not work properly, select Samsung
in Print Using and your machine name in Model.
If you click Customize, you can choose individual components to install.
11
12
Enter the password and click OK.
13
14
After the installation is finished, click Restart.
Installing software requires you to restart your computer. Click Continue
Installation.
Open the Applications folder > Utilities > Print Setup Utility.
•
15
Click Add on the Printer List.
•
16
For Mac OS X 10.5-10.7, click the “+” icon. A display window will pop
up.
•
21
For Mac OS X 10.5-10.7, if Auto Select does not work properly, choose
Select Printer Software and your machine name in Print Using.
Click Add.
Your machine appears in the Printer List, and is set as the default
machine.
To install the fax driver:
a Open the Applications folder > Samsung > Fax Queue Creator.
b Your machine appears on the Printer List.
c Select machine to use and Click Create button.
For Mac OS X 10.4, click IP Printer.
•
17
For Mac OS X 10.5-10.7, open the Applications folder > System
Preferences and click Print & Fax.
Enter the queue name in the Queue input field. If you cannot determine
the queue name for your machine server, try using the default queue
first.
For Mac OS X 10.5-10.7, click IP.
Select HP Jetdirect - Socket in Protocol.
2. Using a Network-Connected Machine
145
Installing driver over the network
8
Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
To install other software:
• See "Installing the Smart Panel" on page 133.
7
8
9
10
11
12
Select network printer and click Search button.
The machine’s IP address and model name appears on list field.
Select your machine and click Next.
Input the printer description and Next.
After the machine is added, click Finish.
When installation is done, click Finish.
• See "Installing the Printer Settings Utility" on page 134.
Add a network printer
Install the Linux driver and add network printer
1
2
3
4
5
6
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
Download the Unified Linux Driver package from the Samsung website.
Extract the UnifiedLinuxDriver.tar.gz file and open the new directory.
Double-click the Linux folder > install.sh icon.
The Samsung installer window opens. Click Continue.
The add printer wizard window opens. Click Next.
1
2
3
4
5
6
7
8
Double-click the Unified Driver Configurator.
Click Add Printer.
The Add printer wizard window opens. Click Next.
Select Network printer and click the Search button.
The printer’s IP address and model name appears on list field.
Select your machine and click Next.
Enter the printer description and click Next.
After the machine is added, click Finish.
2. Using a Network-Connected Machine
146
Installing driver over the network
9
UNIX
• Make sure your machine supports the UNIX operating system before
installing the UNIX printer driver (see "Operating System" on page 7).
See administration guide of your UNIX OS for details.
4
For example, on IBM AIX, use the following commands.
• The commands are marked with “”, when typing the commands, do not
type “”.
• Some features and optional goods may not be available depending on
model or country (see "Operating System" on page 7).
“gzip -d < enter the package name | tar xf -”
5
6
The installation procedure is common for all variants of UNIX OS mentioned.
1
From the Samsung website, download and unpack the UNIX Printer
Driver package to your computer.
2
Acquire root privileges.
Go to the unpacked directory.
Run the install script.
“./install”
To use the UNIX printer driver, you have to install the UNIX printer driver
package first, then setup the printer. You can download the UNIX printer driver
package from the Samsung website ((http://www.samsung.com > find your
product > Support or Downloads).
Installing the UNIX printer driver package
Unpack the UNIX printer driver package.
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Use “chmod 755 install” command to give the permission to the
installer script.
7
8
Execute the “. /install –c” command to verify installation results.
Run “installprinter” from the command line. This will bring up the Add
Printer Wizard window. Setup the printer in this window referring to
the following procedures.
“su -”
3
Copy the appropriate driver archive to the target UNIX computer.
2. Using a Network-Connected Machine
147
Installing driver over the network
Setting up the printer
On some UNIX OS, for example on Solaris 10, just added printers may not be
enabled and/or may not accept jobs. In this case run the following two
commands on the root terminal:
“accept <printer_name>”
“enable <printer_name>”
Uninstalling the printer driver package
The utility should be used to delete the printer installed in the system.
a Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
b Select the printer to be deleted.
c Click Delete to delete the printer from the system.
d Execute the “. /install –d” command to uninstall the whole package.
e To verify removal results, execute the “. /install –c” command.
To add the printer to your UNIX system, run ‘installprinter’ from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
1
2
3
Type the name of the printer.
4
5
6
Specify any printer description in the Description field. This is optional.
7
To re-install it, use the command “. /install” to reinstall the binaries.
8
9
10
Select the appropriate printer model from the model list.
Enter any description corresponding to the type of the printer in the
Type field. This is optional.
Specify the printer location in the Location field.
Type the IP address or DNS name of the printer in the Device textbox for
network-connected printers. On IBM AIX with jetdirect Queue type,
only the DNS name is possible-numeric IP address is not allowed.
Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on Sun Solaris
OS.
Select Copies to set the number of copies.
Check the Collate option to receive copies already sorted.
Check the Reverse Order option to receive copies in the reverse order.
2. Using a Network-Connected Machine
148
Installing driver over the network
11
12
Check the Make Default option to set this printer as default.
Click OK to add the printer.
2. Using a Network-Connected Machine
149
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
7
If the machine does not work in the network environment, activate IPv6.
Refer to the next section followed by.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7 or "Menu
overview" on page 31).
• If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again using Clear Setting.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
10
From the control panel
1
2
3
Connect your machine to the network with a network cable.
4
5
6
Select Start > Control Panel > Printers and Faxes.
The Add Printer Wizard window appears. Follow the instructions in the
window.
Activating IPv6
1
2
3
4
5
Press the
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > IPv6 Activate.
Select On and press OK.
Turn the machine off and turn it on again.
Reinstall your printer driver.
Turn on the machine.
Print a Network Configuration Report that will check IPv6 addresses
(see "Printing a network configuration report" on page 138).
Click Add a printer in the left pane of the Printers and Faxes windows.
Click Add a local printer in the Add Printer windows.
2. Using a Network-Connected Machine
150
IPv6 configuration
Setting IPv6 addresses
11
From the SyncThru™ Web Service
The machine supports the following IPv6 addresses for network printing and
managements.
•
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
For models that do not have the display screen on the control panel, you
need to access SyncThru™ Web Service first using the IPv4 address and
follow the below procedure to use IPv6.
1
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
1
2
3
Press the
•
ID: admin
•
Password: sec00000
(Menu) button on the control panel.
Press Network > TCP/IP (IPv6) > DHCPv6 Config.
3
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
4
5
6
Click TCP/IPv6 on the left pane of the website.
Press OK to select the required value you want.
•
DHCPv6 Addr.: Always use DHCPv6 regardless of router request.
•
DHCPv6 Off: Never use DHCPv6 regardless of router request.
•
Router: Use DHCPv6 only when requested by a router.
Check the IPv6 Protocol check box to activate IPv6.
Check the Manual Address check box. Then, the Address/Prefix text
box is activated.
2. Using a Network-Connected Machine
151
IPv6 configuration
7
Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the
hexadecimal 0 through 9, A through F).
8
9
Choose the DHCPv6 configuration.
Click the Apply button.
Using SyncThru™ Web Service
1
Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
2
Select one of the IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Network
Configuration Report (see "Printing a network configuration report" on
page 138).
3
Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
2. Using a Network-Connected Machine
152
Wireless network setup
• Make sure your machine supports a wireless network. Wireless network
may not be available depending on the model. (see "Features by models"
on page 7).
• This features available for SCX-472xW Series only.
Wireless network name and network key
Wireless networks require higher security, so when an access point is first set up,
a network name (SSID), the type of security used, and a Network Key are created
for the network. Locate this information before proceeding with the machine
installation.
12
13
Getting started
Understanding your network type
Choosing the installation type
You can install a wireless network from the machine’s control panel or the
computer.
Typically, you can only have one connection between your computer and the
machine at a time.
From the control panel
Infrastructure mode
This is an environment generally used for homes and SOHOs
(Small Office/ Home Office). This mode uses an access point to
communicate with the wireless machine.
You can configure wireless parameters with the control panel.
•
See "Using the WPS button" on page 154.
•
See "Using the menu button" on page 157.
Ad hoc mode
This mode does not use an access point. The wireless
computer and wireless machine communicates directly.
2. Using a Network-Connected Machine
153
Wireless network setup
From the computer
If you want to use the wireless network using the infrastructure mode, make
sure that the network cable is disconnected from the machine. Using the
WPS (PBC) button or entering the PIN from the computer to connect to the
access point (or wireless router) varies depending on the access point (or
wireless router) you are using. Refer to the user's guide of the access point
(or wireless router) you are using.
From the computer, we recommend using a USB cable with the program
provided in the supplied software CD
•
See "Setup using Windows" on page 159.
•
See "Setup using Macintosh" on page 165.
•
With a USB cable: You can simply set up a wireless network using the
program on the supplied software CD. Only Windows and Macintosh
operating systems are supported (see "Setup using Windows" on page 159
or "Setup using Macintosh" on page 165).
You can also install a wireless network in Printer Settings Utility with a USB
cable after installing the driver (Windows and Macintosh operating systems
are supported).
Items to prepare
•
Check if the access point (or wireless router) supports Wi-Fi Protected
Setup™ (WPS).
•
Check if your machine supports Wi-Fi Protected Setup™ (WPS).
•
Networked computer (PIN mode only)
Choosing your type
•
With a network cable: You can set up a wireless network using the
SyncThru™ Web Service program (see "Using a network cable" on page 170).
There are two methods available to connect your machine to a wireless network
using the
(WPS) button on the control panel.
14
Using the WPS button
If your machine and an access point (or wireless router) support Wi-Fi Protected
Setup™ (WPS), you can easily configure the wireless network settings by
pressing the
The Push Button Configuration (PBC) method allows you to connect your
machine to a wireless network by pressing both the
(WPS) button on the
control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected
Setup™ (WPS)-enabled access point (or wireless router) respectively.
(WPS) button on the control panel without a computer.
2. Using a Network-Connected Machine
154
Wireless network setup
c AP SSID: After completing the wireless network connection process,
the AP’s SSID information appears on the display.
The Personal Identification Number (PIN) method helps you connect your
machine to a wireless network by entering the supplied PIN information on a WiFi Protected Setup™ (WPS)-enabled access point (or wireless router).
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
To change the WPS mode, press
WPS Setting.
(Menu) > Network > Wireless > OK >
Machines with an display screen
Connecting in PBC mode
1
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
Connecting in PIN mode
1
Press and hold the
2 seconds.
(WPS) button on the control panel for more than
2
The eight-digit PIN appears on the display.
You need to enter the eight-digit PIN within two minutes to the
computer which is connected to the access point (or wireless router).
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the wireless network.
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
c AP SSID: After completing the wireless network connection process,
the AP’s SSID information is diplayed on the LCD display.
The machine starts waiting for up to two minutes until you press the WPS
(PBC) button on the access point (or wireless router).
2
Press the WPS (PBC) button on the access point (or wireless router).
The messages are displayed on the display screen in the order below:
a Connecting: The machine is connecting to the access point (or
wireless router).
b Connected: When the machine is successfully connected to the
wireless network, the WPS LED light stays on.
2. Using a Network-Connected Machine
155
Wireless network setup
Machines without an display screen
Connecting in PBC mode
1
Press and hold the
(WPS) button on the control panel for about 2 - 4
seconds until the status LED blinks quickly.
The machine starts connecting to the wireless network. The LED blinks
slowly for up to two minutes until you press the PBC button on the
access point (or wireless router).
2
3
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
The LED blinks slowly for up to two minutes until you enter the eightdigit PIN.
The WPS LED blinks in the order below:
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Press the WPS (PBC) button on the access point (or wireless router).
a The light blinks fast on the WPS LED. The machine is connecting to
the access point (or wireless router).
b When the machine is successfully connected to the wireless
network, the WPS LED light stays on.
Re-connecting to a network
When the wireless function is off, the machine automatically tries to re-connect
to the access point (or wireless router) with the previously used wireless
connection settings and address.
Connecting in PIN mode
1
The network configuration report, including PIN, must be printed.
• The machine is turned off and on again.
In ready mode, press and hold the
(Cancel or Stop/Clear) button on
the control panel for about 5 seconds. You can find your machine’s PIN
number.
2
In the following cases, the machine automatically re-connects to the
wireless network:
• The access point (or wireless router) is turned off and on again.
Press and hold the
(WPS) button on the control panel for more than
4 seconds until the status LED stays on.
The machine starts connecting to the access point (or wireless router).
2. Using a Network-Connected Machine
156
Wireless network setup
Canceling the connection process
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over the
network" on page 141).
To cancel the wireless network connection when the machine is connecting to
the wireless network, press and release the
(Cancel or Stop/Clear) button
on the control panel. You need to wait 2 minuites to re-connect to the
wireless network.
Disconnecting from a network
To disconnect the wireless network connection, press the
the control panel for more than two seconds.
1
Select
(Menu) > Network > OK > Wireless > OK > WLAN Settings
> OK on the control panel.
2
Press the OK to select the setup method you want.
•
Wizard: The wireless network interface card in your machine
searches for wireless networks in the area and shows the results.
•
Custom: You can configure the according to your needs.
(WPS) button on
•
When the Wi-Fi network is in idle mode: The machine is immediately
disconnected from the wireless network, and the WPS LED is off.
•
When the Wi-Fi network is being used: While the machine waits until the
current job is finished, the light blinks fast on the WPS LED. Then, the
wireless network connection is automatically disconnected. The WPS LED is
Wizard mode
1
The wireless network interface card on your machine searches for
wireless networks in the area and shows the results.
2
Press Search List > OK > select the network > OK.
off.
15
You can select a network using SSID.
Using the menu button
Before starting, you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
3
Press WLAN Security > OK > None > OK.
If you see another message, go to the next step.
2. Using a Network-Connected Machine
157
Wireless network setup
4
According to the network you selected, the WLAN security encryption
type will be WEP or WPA.
•
•
5
2
Press OK to select the method of Operation Mode.
•
Ad-hoc: Allows wireless devices to communicate directly with each
other in a peer-to-peer environment. Go to step 4.
•
Infrastructure: Allows wireless devices to communicate with each
other through an access point. Go to step 5.
In case of WEP, press the Open System or SharedKey.
-
Open System: Authentication is not used, and Encryption
may or may not be used, depending on the need for data
security. Enter the WEP Key after selecting Open System.
-
SharedKey: Authentication is used. A device that has a proper
WEP Key can access the network. Enter the WEP Key after
selecting SharedKey.
In case of WPA, enter the WPA Key. The key length should be
between 8 and 63 characters long.
4
Press OK to select the method of Channel.
If you select Auto, the wireless network interface card on your machine
will automatically adjust the channels.
5
Press OK to select the method of WLAN Security.
•
None: This is used when the validation of a wireless device’s identity
and data encryption are not required for your network. Open system
is used for IEEE 802.11 authentication.
•
Static WEP: This uses the WEP (Wired Equivalent Privacy) algorithm
suggested by IEEE 802.11 standard for security. Static WEP security
mode requires a proper WEP key for data encryption, decryption,
and IEEE 802.11 authentication. Press OK to select the setup method
in Authentication
Press OK.
Custom mode
1
3
Enter the SSID when Edit SSID appears on the top line of the display, the
name that identifies a wireless network. SSID is case-sensitive so you
need to enter it carefully. Press OK.
-
Open System: Authentication is not used, and encryption may
or may not be used, depending on the need for data security.
Enter the WEP Key.
-
SharedKey: Authentication is used. Enter the WEP Key after
selecting SharedKey.
Select the type of wireless connections.
2. Using a Network-Connected Machine
158
Wireless network setup
•
WPA-PSK or WPA2-PSK: You can select WPA-PSK or WPA2-PSK to
authenticate the print server based on WPA Pre-Shared Key. This
uses a shared secret key (generally called Pre-Shared Key
passphrase), which is manually configured on the access point and
each of its clients.
a Press OK when WPA-PSK or WPA2-PSK appears of on the
display.
b Press OK to select TKIP or AES in Encryption. If you select
WPA2-PSK, press OK to select AES or TKIP + AES in Encryption.
c Enter the WPA Key.
6
Access point via USB cable
Items to prepare
•
Access point
•
Network-connected computer
•
Software CD that was provided with your machine
•
The machine installed with a wireless network interface
•
USB cable
Press OK.
Creating the infrastructure network
Disconnect the network cable (standard or crossover). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
16
Setup using Windows
1
2
3
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
Insert the supplied software CD into your CD-ROM drive.
Click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter, which represents your
CD-ROM drive and click OK.
Shortcut to Wireless Setting program without CD: If you have installed the
printer driver once, you can access the Wireless Setting program without
CD. From the Start menu, select Programs or All Programs > Samsung
Printers > your printer driver name > Wireless Setting Program.
2. Using a Network-Connected Machine
159
Wireless network setup
4
Select the Wireless Setting and Installation option.
If the search has failed, you may check if the USB cable is properly connected
between the computer and machine, and follow the instructions on the
window.
7
•
•
Install Now: If you have already set up the wireless network, click
this button to install the machine’s driver to use the wireless network
machine. If you have not set up the wireless network, click the
Wireless Setting and Installation button to set up the wireless
network before you click this button.
Wireless Setting and Installation: Configure the wireless network
settings of your machine with a USB cable then install the machine
driver. This is only for users who have not set up the wireless
connection before.
5
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
6
The software searches the wireless network.
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
If you cannot find the network name you want to choose, or if you want to
set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of access point you
want (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre- Shared Key pass phrase) which is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,
TKIP AES).
• Network Key: Enter the encryption network key value.
2. Using a Network-Connected Machine
160
Wireless network setup
• Confirm Network Key: Confirm the encryption network key value.
8
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The window shows the wireless network settings and checks if the
settings are correct. Click Next.
•
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown
in the window. If it shows Static, click Change TCP/IP to change the
assignment method to DHCP.
The wireless network security window appears when the access point has
security settings.
•
The wireless network security window appears. The window may differ
according to its security mode: WEP, or WPA.
For the Static method
If the IP address assignment method is Static, check if Static is shown
in the window. If it shows DHCP, click Change TCP/IP to enter the IP
address and other network configuration values for the machine.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer is
set to DHCP, you must contact the network administrator to get the
static IP address.
• WEP
Select Open System or Shared Key for the authentication and enter the
WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
For example:
If the computer’s network information is as shown below:
• WPA
Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key that changes
automatically at regular intervals. WPA also uses TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption Standard) for data
encryption.
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as follows:
9
-
IP address: 169.254.133.43
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
-
Gateway: 169.254.133.1
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click Next.
2. Using a Network-Connected Machine
161
Wireless network setup
10
The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Select No if you want to return to the beginning screen.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
Then, click Next.
11
12
13
14
Click Next when the Confirm Printer Connection window appears.
•
Network-connected computer
•
Software CD that was provided with your machine
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
•
The machine installed with a wireless network interface
•
USB cable
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Creating the ad hoc network in Windows
Select the components to be installed. Click Next.
Otherwise, just click Next and go to step 16.
15
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
16
17
Items to prepare
To register as a user of the machine in order to receive information from
Samsung, click On-line Registration.
Click Finish.
1
2
3
Check whether the USB cable is connected to the machine.
Turn on your computer and the wireless network machine.
Insert the supplied software CD into your CD-ROM drive.
Click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter, which represents your
CD-ROM drive and click OK.
2. Using a Network-Connected Machine
162
Wireless network setup
4
Select the Wireless Setting and Installation option.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instruction in the window.
7
•
•
Install Now: If you have set the wireless network, click this button to
install the machine’s driver to use the wireless network machine. If
you have not set the wireless network, click Wireless Setting and
Installation button to set the wireless network before you click this
button.
Wireless Setting and Installation: Configure the wireless network
settings of your machine’s with a USB cable then install the machine
driver. This only for users who have not set up the wireless
connection before.
After searching the wireless networks, a list of wireless networks your
machine has searched appears.
If you want to use the Samsung default ad hoc setting, select the last
wireless network on the list, Network Name(SSID) is portthru and
Signal is Printer Self Network.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network
from the list.
If you want to change ad hoc settings click the Advanced Setting button.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
• Operation Mode: Select ad hoc.
5
6
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The software searches the wireless network.
• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.
2. Using a Network-Connected Machine
163
Wireless network setup
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the ad hoc network
has security setting.
The wireless network security window appears. Select Open System or
Shared Key for the authentication and click Next.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
8
The window showing the wireless network setting appears. Check the
settings and click Next.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example:
If the computer’s network information is as shown follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as below:
- IP address: 169.254.133.43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
2. Using a Network-Connected Machine
164
Wireless network setup
9
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
14
If not, click No to reprint it.
If the Change PC Network Setting window appears, follow the steps in the
window.
Click Next if you are finished with the computer’s wireless network settings.
If you set the computer’s wireless network on DHCP, it will take several
minutes to receive the IP address.
If the test page prints out correctly, click Yes.
15
To register as a user of the machine in order to receive information from
Samsung, click On-line Registration.
16
Click Finish.
17
Setup using Macintosh
10
11
12
The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Items to prepare
Select No if you want to return to the beginning screen.
•
Access point
Then, click Next.
•
Network-connected computer
•
Software CD that was provided with your machine
•
The machine installed with a wireless network interface
•
USB cable
Click Next when the Confirm Printer Connection window appears.
Select the components to be installed. Click Next.
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
13
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 15.
Access point via USB cable
1
2
Check whether the USB cable is connected to the machine.
Turn on your computer, access point, and machine.
2. Using a Network-Connected Machine
165
Wireless network setup
3
4
5
6
7
8
9
10
Insert the supplied software CD into your CD-ROM drive.
11
12
Select the Wireless Network Setting.
When you set the wireless configuration manually, click Advanced Setting.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder.
Double-click the Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
When the message that warns that all applications will close on your
computer appears, click Continue.
The software searches the wireless network.
• Enter the wireless Network Name: Enter the SSID of the access point
you want with (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre- Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
If the search has failed, you may check if the USB cable is connected
between the computer and machine properly, and follow the instructions in
the window.
13
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
2. Using a Network-Connected Machine
166
Wireless network setup
The wireless network security window appears when the access point has
security setting.
14
The window shows the wireless network settings and check if settings
are right. Click Next.
The wireless network security window appears. The window may differ
according to its security mode: WEP or WPA.
•
• WEP
Select Open System or Shared Key for the authentication and enter the
WEP security key. Click Next.
WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
•
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown
in the window. If it shows Static, click Change TCP/IP to change the
assignment method to DHCP.
For the Static method
If the IP address assignment method is Static, check if Static is shown
in the window. If it shows DHCP, click Change TCP/IP to enter the IP
address and other network configuration values for the machine.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer is
set to DHCP, you must contact the network administrator to get the
static IP address.
• WPA
Enter the WPA shared key and click Next.
WPA authorizes and identifies users based on a secret key that changes
automatically at regular intervals. WPA also uses TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption Standard) for data
encryption.
For example:
If the computer’s network information is as shown follows:
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as follows:
15
-
IP address: 169.254.133.43
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
-
Gateway: 169.254.133.1
The wireless network connects according to the network configuration.
2. Using a Network-Connected Machine
167
Wireless network setup
16
17
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine.
Follow the instructions on the screen to complete the installation. After
the installation is finished, click Quit or Restart.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
•
Network-connected computer
•
Software CD that provided with your machine
•
The machine installed with a wireless network interface
•
USB cable
4
5
6
7
8
9
10
11
Double-click the CD-ROM icon that appears on your Macintosh desktop.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
When the message that warns that all applications will close on your
computer appears, click Continue.
Click Wireless Network Setting and Installation.
The software searches the wireless network devices.
If the search has failed, check if the USB cable is connected between the
computer and machine properly, and follow the instructions in the window.
Creating the ad hoc network in Macintosh
1
2
3
Check whether the USB cable is connected to the machine.
Turn on your computer and machine.
Insert the supplied software CD into your CD-ROM drive.
2. Using a Network-Connected Machine
168
Wireless network setup
12
After searching the wireless networks, a list of wireless networks your
machine has searched appears.
The wireless network security window appears when the ad hoc network
has security setting.
If you want to use the Samsung default ad hoc setting, select the last
wireless network on the list, which Network Name(SSID) is portthru
and Signal is Printer Self Network.
The wireless network security window appears. Select Open System or
Shared Key for the authentication and click Next.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network
from the list.
If you want to change ad hoc settings click the Advanced Setting button.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
13
The window showing the wireless network settings appears. Check the
settings and click Next.
• Operation Mode: Select ad hoc.
• Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
2. Using a Network-Connected Machine
169
Wireless network setup
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use Static wireless network
setting, you must contact the network administrator to get the static IP
address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
• For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example:
If the computer’s network information is as shown follows:
14
15
The wireless network connects according to the network configuration.
16
Follow the instructions on the screen to complete the installation. After
the installation is finished, click Quit or Restart.
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine.
18
Using a network cable
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 141).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as below:
- IP address: 169.254.133.43
Items to prepare
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
•
Access point
•
Network-connected computer
2. Using a Network-Connected Machine
170
Wireless network setup
•
Software CD that was provided with your machine
•
The machine installed with a wireless network interface
•
Network cable
Printing a network configuration report
You can identify the network settings of your machine by printing a network
configuration report.
See "Printing a network configuration report" on page 138.
To configure wireless parameters, you can use SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection
status.
1
Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
2
Start a web browser such as Internet Explorer, Safari or Firefox and enter
your machine’s new IP address in the browser window.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
For example,
3
4
See "Setting IP address" on page 138.
Configuring the machine’s wireless network
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
5
When the SyncThru™ Web Service window opens, click Network
Settings.
6
Click Wireless > Wizard.
2. Using a Network-Connected Machine
171
Wireless network setup
9
Wizard will help you setup the wireless network configuration. However, if
you want to set the wireless network directly, select Custom.
7
Disconnect the network cable (standard or network). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
Select the one Network Name(SSID) in the list.
•
•
SSID: SSID (Service Set Identifier) is a name that identifies a wireless
network, access points, and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case-sensitive.
Operation Mode: Operation Mode refers to the type of wireless
connections (see "Wireless network name and network key" on page
153).
-
Ad-hoc: Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
-
Infrastructure: Allows wireless devices to communicate with
each other through an access point.
If your network’s Operation Mode is Infrastructure, select the SSID of the
access point. If the Operation Mode is Ad-hoc, select the machine’s SSID.
Note that “portthru” is the default SSID of your machine.
The confirmation window appears, please check your wireless setup. If
the setup is right, click Apply.
19
Turning the Wi-Fi network on/off
You can also turn on/off the Wi-Fi from the machine’s control panel using
the Network menu.
1
Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
2
Start a web browser such as Internet Explorer, Safari or Firefox and enter
your machine’s new IP address in the browser window.
For example,
8
Click Next.
If the wireless security setting window appears, enter the registered
password (network key) and click Next.
3
Click Login on the upper right of the SyncThru™ Web Service website.
2. Using a Network-Connected Machine
172
Wireless network setup
4
Type in the ID and Password then click Login.
Connecting Failure - Not Found SSID
•
ID: admin
•
•
Password: sec00000
The machine is unable to search the network name (SSID) you have selected
or entered. Check the network name (SSID) on your access point and try
connecting again.
•
Your access point is not turned on. Turn on your access point.
5
When the SyncThru™ Web Service window opens, click Network
Settings.
6
Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.
20
Troubleshooting
Problems during setup or driver installation
Printers Not Found
•
Your machine may not be turned on. Turn on your computer and the
machine.
•
USB cable is not connected between your computer and machine. Connect
machine to your computer using the USB cable.
•
The machine does not support a wireless network. Check the machine's
user's guide included on the software CD supplied with your machine and
prepare a wireless network machine.
2. Using a Network-Connected Machine
173
Wireless network setup
Connecting Failure - Invalid Security
▪
•
Then, the machine’s network information should be as below:
You configured security incorrectly. Check the configured security on your
access point and machine.
Connecting Failure - General Connection Error
•
Your computer is not receiving a signal from your machine. Check the USB
cable and your machine’s power.
Connecting Failure - Connected Wired Network
•
Subnet Mask: 255.255.0.0
▪
IP address: 169.254.133.43
▪
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
▪
Gateway: 169.254.133.1
Other problems
If problems occur while using the machine on a network, check the following:
Your machine is connected with a wired network cable. Remove the wired
network cable from your machine.
For information on the access point (or wireless router), refer to its own
user's guide.
PC Connection Error
•
The configured network address is unable to connect between your
computer and machine.
•
Your computer, access point (or wireless router), or machine may not be
turned on.
-
•
Check the wireless reception around the machine. If the router is far from
the machine or there is an obstacle, you might have difficulty receiving the
signal.
•
Cycle the power for the access point (or wireless router), machine, and
computer. Sometimes cycling the power can recover network
communication.
For a DHCP network environment
The receives the IP address automatically (DHCP) when computer is
configured to DHCP.
-
For a Static network environment
The machine uses the static address when the computer is configured
to static address.
For example:
If the computer’s network information is as shown below:
▪
IP address: 169.254.133.42
2. Using a Network-Connected Machine
174
Wireless network setup
•
Check whether firewall software (V3 or Norton) is blocking the
communication.
•
If the computer and the machine are connected on the same network and it
cannot be found when searching, firewall software might be blocking the
communication. Refer to the user's guide for the software to turn it off and
try searching for the machine again.
•
Check whether the machine's IP address is allocated correctly. You can
check the IP address by printing the network configuration report.
•
Check whether the access point (or wireless router) has a configured
security (password). If it has a password, refer to the access point (or wireless
router) administrator.
•
Check the machine's IP address. Reinstall the machine driver and change the
settings to connect to the machine on the network. Due to the
characteristics of DHCP, the allocated IP address could change if the
machine is not used for a long time or if the access point has been reset.
•
Check the wireless environment. You might not be able to connect to the
network in the infrastructure environment where you need to type in a
user's information before connecting to access point (or wireless router).
•
This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless
communication types (e.g., Bluetooth) are not supported.
•
When using the ad hoc mode, in operating systems such as Windows Vista,
you might need to set the wireless connection setting every time you use
the wireless machine.
•
You cannot use Infrastructure mode and Ad hoc mode at the same time for
Samsung wireless network machines.
•
The machine is within the range of the wireless network.
The machine is located away from obstacles that could block the wireless
signal.
Remove any large metal objects between the access point (or wireless
router) and the machine.
Make sure the machine and wireless access point (or wireless router) are not
separated by poles, walls, or support columns containing metal or concrete.
•
The machine is located away from other electronic devices that may
interfere with the wireless signal.
Many devices can interfere with the wireless signal, including a microwave
oven and some Bluetooth devices.
2. Using a Network-Connected Machine
175
3. Useful Setting Menus
This chapter explains how to browse the current status of your machine, and the method of setting for advanced
machine setup.
• Before you begin reading a chapter
177
• Print menu
178
• Copy menu
179
• Fax menu
186
• Scan menu
190
• System setup
192
• Admin setup
204
• Custom setup
205
Before you begin reading a chapter
This chapter explains all the features available for this series' models to help users easily understand the features.
You can check the features available for each model in the Basic Guide (see "Menu overview" on page 31).
The following are tips for using this chapter
•
The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing
•
Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
•
For models that do not have the
•
Some menu names may differ from your machine depending on its options or the models.
(Menu).
(Menu) on the control panel, this feature is not applicable (see "Control panel overview" on page 24).
3. Useful Setting Menus
177
Print menu
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Print Setup on the touch screen.
Item
(Menu) > Print Setup on the control panel.
Description
Orientation
Selects the direction in which information is printed on a
page.
Copies
You can enter the number of copies using the number
keypad.
Resolution
Specifies the number of dots printed per inch (dpi). The
higher the setting, the sharper printed characters and
graphics.
Darkness
Lightens or darkens the print on the page. The Normal
setting usually produces the best result. Use the Light
toner density setting to save toner.
Darken Text
Prints text darker than on a normal document.
Emulation
Sets the emulation type and option.
3. Useful Setting Menus
178
Copy menu
1
Item
Copy feature
Description
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 62).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Reduce/Enlarge
If the machine is set Eco mode, reduce and
enlarge features are not available.
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Default Setting > Copy Default on the
touch screen.
•
(copy) >
Darkness
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 61)
Contrast
Adjusts the contrast level to scan an original that is
easier to read, when the original contains too faint or
too dark contents (see "Contrast" on page 62)
Original Type
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 62)
Original Orientation
Sets the original image’s orientation.
Layout
Adjusts the layout format such as poster, clone, ID copy,
2/4-up, booklet, etc.
(Menu) > Copy Feature on the control panel.
Or press Copy > select the menu item you want on the touch screen.
Item
• Scan Size
Description
Sets the image size.
• Original Size
Copies
You can enter the number of copies using the number
keypad.
3. Useful Setting Menus
179
Copy menu
• Collate Copy
Set the machine to sort the copy job. For example, if you
make 2 copies of a 3 page original, one complete 3 page
document will print followed by a second complete
document.
• On: Prints output in sets to match the sequence of
originals.
Item
• 2-up or 4-up
• N-up Copy
Description
Reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
1
2
3
4
2
• Copy Collation
Description
1
Item
This copy feature is available only when you
load originals into the document feeder.
• Off: Prints output sorted into stacks of individual
pages.
3. Useful Setting Menus
180
Copy menu
Item
Description
Item
Prints a single-page document onto 4 (Poster 2x2), 9
(Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the
purpose of pasting the sheets together to form one
poster-size document.
Description
Prints multiple original images on a single page. The
number of images is automatically determined by the
original image and the paper size.
Clone Copy
• This copy feature is available only when you
place originals on the scanner glass.
• You cannot adjust the copy size using
Reduce/Enlarge for the Clone Copy
feature.
Poster Copy
• This copy feature is available only when you
place originals on the scanner glass.
• Your original is divided into 9 portions. Each
portion is scanned and printed one by one in
the following order:
3. Useful Setting Menus
181
Copy menu
Item
Description
The Book Copy feature allows you to copy an entire
book. If the book is too thick, lift the cover until its
hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm,
start copying with the cover open.
Item
Description
The machine automatically prints on one or both sides
of the paper, which are then folded to produce a
booklet with all of the pages in the correct sequence.
Booklet
The machine will reduce and correctly adjust the
position of each image to fit on the selected paper.
• Off: Does not use this feature.
Book Copy
Prints an image without its background. This copy
feature removes the background color and can be
helpful when copying an original containing color in
the background, such as a newspaper or a catalog.
• Left Page: Use this option to print left page of the
book.
• Right Page: Use this option to print right page of the
book.
• Both Page: Use this option to print both pages of
the book.
Adjust Bkgd
• Off: Does not use this feature.
• Auto: Optimizes the background.
• Enhance Lev.1~2: The higher the number is, the
more vivid the background is.
This copy feature is available only when you
place originals on the scanner glass.
• Erase Lev.1~4: The higher the number is, the lighter
the background is.
3. Useful Setting Menus
182
Copy menu
Item
Description
Item
Allows you to create a binding edge for the document.
The image can be adjusted up or down on the page
and/or shifted to the right or left.
Description
Allows you to erase spots, drill holes, fold creases and
staple marks along any of the four edges of a document.
• Off: Does not use this feature.
Margin Shift copying
Edge Erase copying
• Off: Does not use this feature.
• Auto Center: Automatically copy in the center of the
paper. This feature is available only when you place
originals on the scanner glass.
• Small Original: rases the edge of the original if it is
small. This feature is available only when you place
originals on the scanner glass.
• Hole Punch: Erases the marks of bookbinding holes.
• Book Center: Erases the middle part of the paper
which is black and horizontal, when you copy a
book. This feature is available only when you place
originals on the scanner glass.
• Custom Margin: Enter the left, right, top, bottom
margin using Number keypad.
• Border Erase: Enter the left, right, top, bottom
margin using Number keypad.
Gray Enhance
copying
When you make a copy in gray scale, use this feature to
get better quality of copy-output.
3. Useful Setting Menus
183
Copy menu
Item
Watermark copying
Description
Item
The watermark option allows you to print text over an
existing document. For example, you use it when you
want to have large gray letters reading “DRAFT” or
“CONFIDENTIAL” printed diagonally across the first
page or all pages of a document.
Description
• 2->1Side
• 2->2Side
Duplex (continue)
• 2->1Side ROT2
You can set the machine to print copies on both sides of
paper.
• Off: Prints in normal mode.
• 1->2Side Short
2
Duplex
3
5
• 1->2Side Long
3. Useful Setting Menus
184
Copy menu
2
Copy Setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
Press
(copy) >
Item
Change Default
(Menu) > Copy Setup on the control panel.
Description
Resets the value or setting to the printer’s out-of-box
state.
3. Useful Setting Menus
185
Fax menu
3
Item
Fax Feature
Darkness
Adjusts the brightness level to scan an original that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 61).
Resolution
The default document settings procedure good results
when using typical text-based originals. However, if you
send originals that are of poor quality, or contain
photographs, you can adjust the resolution to produce
a higher quality fax (see "Resolution" on page 69).
Duplex
prints the received fax on both sides of paper.
• Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview"
on page 31).
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
•
(fax) >
Description
Sends a fax to multiple destinations (see "Sending a fax
to multiple destinations" on page 67).
(Menu)> Fax Feature on the control panel.
Multi Send
You cannot send a color fax using this feature.
Or press Fax > select the menu item you want on the touch screen.
Item
• Scan Size
Description
Sets the image size.
• Original Size
Contrast
Sets your machine to send a fax at a later time when you
will not be present (see "Delaying a fax transmission" on
page 243).
Adjusts the contrast level to scan an original that is
easier to read, when the original contains too faint or
too dark contents.
Delay Send
You cannot send a color fax using this feature.
3. Useful Setting Menus
186
Fax menu
4
Item
Priority Send
Forward
Description
Sending setup
Scans the original into memory and immediately
transmits it when the current operation is finished.
Priority transmission will interrupt a sending to multiple
destinations between stations (example, when the
transmission to station A ends, before transmission to
station B begins) or between redial attempts (see
"Sending a priority fax" on page 244).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Forwards the received or sent fax to other destination
by a fax or PC. If you are out of office but have to receive
the fax, this feature may be useful.
To change the menu options:
•
Press
• See "Forwarding a sent fax to another destination"
on page 244.
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
(fax) >
(Menu) > Fax Setup > Sending on the control panel.
• See "Forwarding a received fax" on page 245.
Item
Description
Stores the received fax in memory without printing out.
To print received documents, you need to enter the
password. You can prevent your received faxes from
being accessed by unauthorized people (see "Receiving
in secure receiving mode" on page 249).
Redial Times
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term
Sets the time interval before automatic redialling.
Add Page
Adds additional documents to a reserved delay fax job
(see "Adding documents to a reserved fax" on page
243).
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
Cancel Job
Cancels the delayed fax job which is saved in memory
(see "Canceling a reserved fax job" on page 244).
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
Secure Receive
3. Useful Setting Menus
187
Fax menu
Item
Description
Send Report
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
select On-Error, the machine prints a report only when
a transmission is not successful.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Toll Save
Sends faxes at a preset toll-saving time to save on call
costs. This setting may not be available depending on
your country.
Setup Wizard
Makes it easy to configure the necessary fax options
such as machine ID, fax number, etc.
To change the menu options:
•
Press
(fax) >
•
Or press Setup > Machine Setup > Default Setting > Fax Default on the
touch screen.
Item
Description
Receive Mode
Selects the default fax receiving mode.
Ring To Answer
Specifies the number of times the machine rings before
answering an incoming call.
Stamp RCV Name
Automatically prints the page number, and the date
and time of reception at the bottom of each page of a
received fax.
Rcv Start Code
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Auto Reduction
Automatically reduces an incoming fax page to fit the
size of the paper loaded in the machine.
Discard Size
Discards a specific length from the end of the received
fax.
Junk Fax Setup
Blocks any unwanted faxes that you stored in the
memory as junk fax numbers. This setting may not be
available depending on your country.
5
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
(Menu) > Fax Setup > Receiving on the control panel.
3. Useful Setting Menus
188
Fax menu
Item
Description
DRPD Mode
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 248).
Duplex Print
Prints the received fax data on both sides of the paper.
You can save the paper usage.
• Doc Box Saving
• Document Box
Saving
Stores received faxes in the common box. This menu
only appears when an optional mass storage device
(HDD) drive has been installed (see "Variety feature" on
page 10).
3. Useful Setting Menus
189
Scan menu
6
Item
Scan feature
• SMB Default
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Default Setting > Scan Default on the
touch screen.
•
(scan) >
• SMB
Sets scan destination to an SMB server. You scan the
originals and send the scanned image to an SMB server
(see "Scanning to FTP/SMB server" on page 233).
Send Report
Prints a confirmation report showing whether the
scanned image sending was successful.
Local PC
Sets scan destination to a usb-connected computer.
You scan the originals and save the scanned image to a
directory such as My Documents (see "Basic Scanning"
on page 65).
Network PC
Sets scan destination to a network-connected
computer. You scan the originals and save the scanned
image to a directory such as My Documents (see
"Scanning from network connected machine" on page
231).
Document Box
Sets scan destination to a Document Box. You scan the
originals and send the scanned image to the storage
which called Document Box in the machine.
Shared Boxes
Sets scan destination to a shared folder. You can create
and use the shared folder (see "Using shared folder
features" on page 252).
(Menu) > Scan Feature on the control panel.
Or press Scan > select the menu item you want on the touch screen.
Item
• USB Default
• USB
• Email Default
• Send Email
• Custom Email
• FTP Default
• FTP
Description
Sets scan destination to a USB. You scan the originals
and save the scanned image to a USB device.
Sets scan destination to an email. You scan the originals
and email the scanned image to destinations (see
"Scanning to email" on page 232).
Description
Sets scan destination to an FTP server. You scan the
originals and send the scanned image to an FTP server
(see "Scanning to FTP/SMB server" on page 233).
3. Useful Setting Menus
190
Scan menu
7
Item
Scan setup
Contrast
Description
Adjust the contrast level to scan lighter or darker than
the original.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
•
Press
(scan) >
(Menu) > Scan Setup on the control panel.
•
Or press Setup > Machine Setup > Default Setting > Scan Default on the
touch screen.
Item
• Scan Size
Description
Sets the image size.
• Original Size
Original Type
Sets the original document’s type.
Resolution
Sets the image resolution.
Color Mode
Sets the color mode.
File Format
Sets the file format in which the image is to be saved. If
you select BMP, JPEG, TIFF, or PDF, you can select to
scan multiple pages.
Darkness
Adjusts the brightness level to scan.
3. Useful Setting Menus
191
System setup
8
Item
Machine setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Select Form
Form overlay is images stored on the printer’s mass
storage device (HDD) as a special file format that can be
printed in layers on any document.
HDD Spooling
When On, stores documents on the mass storage device
(HDD) for network printing.
Language
Sets the language of the text that appears on the control
panel display.
Default Mode
Sets the machine’s default mode among fax mode, copy
mode, or scan mode.
Default Paper Size
You can set the default paper size to use.
To change the menu options:
•
Press
•
Or press Setup > Machine Setup > Initial Setup on the touch screen.
Item
(Menu) > System Setup > Machine Setup on the control panel.
Sets how long the machine waits before going to power
save mode.
Description
Machine ID
Sets the machine ID which will be printed at the top of
each fax page that you send.
Fax Number
Sets the fax number which will be printed at the top of
each fax page that you send.
Date & Time
Sets the date and time.
PowerSave
Selects the format for displaying time between 12 hr. and
24 hr.
• Off: Prints in normal mode.
Form Menu
• Single Form: Prints all page using the first form.
• Double Form: Prints the front page using the first
form and the back page using the second form.
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets how long the machine’s scanner part waits before
going to power save mode.
Scan PWR Save
Clock Mode
Description
System Timeout
When the scanner does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets the time that the machine remembers previously
used copy settings. After the timeout, the machine
restores the default copy settings.
3. Useful Setting Menus
192
System setup
Item
Job Timeout
Description
Sets the length of time the printer waits before printing
the last page of a print job that does not end with a
command to print the page.
You can set the condition to wake up from power-save
mode. Set the item on.
Wakeup Event
• Button Press: When you press any button except
power button, the machine wake up from the power
save mode.
• Scanner: When you insert paper in the document
feeder, the machine wake up from the power save
mode.
Item
Auto CR
Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Firmware Version
Shows the product’s firmware version.
AutoComplete
Provides suggestions while you type an email address or
fax number. This enables you to find and select the data
without typing it in completely.
• Tray Chaining
• Auto Tray Switch
• Printer: When you open or close the scan unit, the
machine wake up from the power save mode.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
• On: If a paper mismatch occurs, an error message will
display. The machine waits for about 30 second, then
automatically clear the message and continue
printing.
• Altitude Adj.
• Altitude
Adjustment
Optimize print quality according to the machine’s
altitude.
Determine whether or not the machine continues
printing when it detects the paper does not match. For
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
This option does not appear if you selected Auto
for Paper Source from printer driver.
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
Auto Continue
Description
Paper Substitution
Automatically substitutes the printer driver’s paper size
to prevent the paper mismatch between Letter and A4.
For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Paper Mismatch
Determine whether to disregard the paper mismatch
error or not. Select Off, then the machine does not stop
printing even if the paper mismatches.
3. Useful Setting Menus
193
System setup
Item
PrintBlankPage
Multi-Bin
Description
The printer detects the printing data from computer
whether a page is empty or not. You can set to print or
skip the blank page.
Item
Import Setting
Imports data stored on a USB memory stick to the
machine.
Export Setting
Exports data stored on a USB memory stick to the
machine.
Toner Save
Activating this mode extends the life of your toner
cartridge and reduces your cost per page beyond what
one would experience in the normal mode, but it reduces
print quality.
Quiet Mode
• Clean Fuser: Cleans the fuser by printing a sheet.
You can reduce the printing noise by turning this menu
on. However, the printing speed and quality may be
declined.
• CLR Empty Msg.: This option appears only when
toner cartridge is empty.
Allows you to save print resources and enables ecofriendly printing.
• Mode: Selects the multi-bin mode you want to use.
• Default Bin: Selects the bin to use as a default.
Default Source
Sets the tray to use as a default.
Address Book
Views or prints the phone book or email address list.
• Clean Drum: Cleans the OPC drum of the cartridge by
printing a sheet.
• Supplies Info.: Allows you to check how many pages
are printed and how much toner is left in the cartridge.
Maintenance
Description
• TonerLow Alert: If toner in the cartridge has run out,
a message informing the user to change the toner
cartridge appears. You can set the option for this
message to appear or not.
• Paper Stacking: If you use a machine in a humid area,
or you are using the damp print media caused by a
high humidity, the print-outs on the output tray may
be curled and may not be stacked properly. In this
case, you can set the machine to use this function to
let print-outs stacked firmly. But, using this function
will make the print speed slow.
• Default Mode: Select whether to turn the Eco mode
on or off.
Eco Settings
On force (On-Forced): Sets the Eco mode on with
password. If a user wants to turn the Eco mode
on/off, the user needs to enter the password.
• Select Template (Select Temp.): Selects the eco
template set from the SyncThru™ Web Service.
Clear Setting
Restores the machine’s factory default settings.
3. Useful Setting Menus
194
System setup
9
10
Paper setup
Sound / Volume
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
To change the menu options:
To change the menu options:
•
Press
•
Press
•
Or press Setup > Machine Setup > Paper Setup on the touch screen.
•
Or press Setup > Machine Setup > Initial Setup > Sound/Volume on the
touch screen.
(Menu) > System Setup > Paper Setup on the control panel.
Item
Paper Size
(Menu) > System Setup > Sound/Volume on the control panel.
Description
Sets the paper size as A4, Letter, or other paper sizes,
according to your requirements.
Paper Type
Chooses the type of the paper for each tray.
Paper Source
Selects from which tray the paper is used.
Margin
Sets the margins for the document.
Tray Confirm
Activates the tray confirmation message. If you open and
close a tray, a window asking you whether to set the
paper size and type for the tray just opened appears.
Item
Description
Key Sound
Turns the key sound on or off. With this option set to on,
a tone sounds each time a key is pressed.
Alarm Sound
Turns the alarm sound on or off. With this option set to
on, an alarm tone sounds when an error occurs or fax
communication ends.
3. Useful Setting Menus
195
System setup
11
Item
Description
Report
Turns on or off the sounds from the telephone line
through the speaker, such as a dial tone or a fax tone.
With this option set to Comm. which means the speaker
is on until the remote machine answers.
Speaker
You can adjust the volume level using On Hook
Dial. You can adjust the speaker volume only
when the telephone line is connected.
To change the menu options:
a Press
•
Press
•
Or press Setup > Machine Setup > Reports on the touch screen.
(fax) on the control panel.
b Press On Hook Dial. A dial tone sounds from
the speaker.
c Press the arrows until you hear the volume you
want.
d Press On Hook Dial to save the change and
return to ready mode.
Ringer
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Adjusts the ringer volume. For the ringer volume, you can
select off, low, middle, and high level.
(Menu) > System Setup > Report on the control panel.
Item
Description
Menu Map
Prints the menu map which shows the layout and
current settings of this machine.
All Reports
Prints all kinds of reports that this machine
provides.
Configuration
Prints a report on the machine's overall
configuration.
• Supplies Info.
Prints supplies’ information page.
• Supplies Information
Address Book
Prints all of the email addresses currently stored
in the machine’s memory.
3. Useful Setting Menus
196
System setup
Item
Demo Page
Fax Send
Fax Sent
Fax Received
Email Sent
• Scheduled Jobs
Description
Prints the demo page to check whether your
machine is printing properly or not.
Prints a transmission report including the fax
number, the number of pages, the elapsed time
of the job, the communication mode, and the
communication results for fax job. You can set up
your machine to automatically print a
transmission confirmation report after each fax
job.
Prints information on the faxes you have recently
sent.
Prints information on the faxes you have recently
received.
Prints information on the emails you have
recently sent.
• Fax Scheduled Jobs
Prints the document list currently stored for
delayed faxes along with the starting time and
type of each operation.
JunkFax
Prints the fax numbers specified as junk fax
numbers.
• Network Conf.
• Network Configuration
Prints information on your machine’s network
connection and configuration.
Item
• User Auth
• Local User
Authentication
Description
Prints the authorized users who are allowed to
use the email function.
PCL Font
Prints the PCL font list.
• PS Font
Prints the PS/PS3 font list.
• PS3 Font
EPSON Font
Prints the EPSON font list.
KSC5843 Font
Prints the KS5843 font list.
KSC5895 Font
Prints the KS5895 font list.
KSSM Font
Prints the KSSM font list.
• Net User Auth
Prints the users and their IDs who logged in the
domain.
• Network User
Authentication
Usage Counter
Prints a usage page. The usage page contains the
total number of pages printed.
Fax Options
Prints the information of a fax reports.
• Stored Job List
• Stored Jobs
Prints jobs currently stored in the optional
memory or on a mass storage device (HDD).
• Completed Job
Prints list of completed jobs.
• Completed Jobs
3. Useful Setting Menus
197
System setup
Item
Description
• Accounting Report
This is used only available when Job Accounting
is enabled from the SyncThru™ Web Admin
Service. You can print a report of printout counts
for each user.
• Accounting
Item
Supplies Life
Shows the supply life indicators (see "Monitoring the
supplies life" on page 77.)
TonerLow Alert
Customizes the level to alert toner low or toner empty
(see "Setting the toner low alert" on page 78).
• Serial Number
12
Maintenance
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
• Serial No.
Shows the machine’s serial number. When you call for
service or register as a user on the Samsung website, you
can find this.
Paper Stacking
Enables the automatic linking feature for trays. when one
tray is not available for paper empty or mismatch, this
option allows your printer to feed paper from another
available tray.
Color
Allows you to adjust the color setting such as contrast
level, color registration, color density, etc.
Ram Disk
Sets some part of ram disk to the job storage area. Using
the storage area activates the job manage menu (see "Job
manage" on page 199). This allows the data from your
computer to be sent to the print queue of the ram disk.
To change the menu options:
•
Press
(Menu) > System Setup > Maintenance on the control panel.
•
Or press Setup > Machine Setup > Initial Setup on the touch screen.
Item
Description
Description
CLR Empty Msg.
When toner cartridge is empty, this option appears. You
can clear the empty message.
Ignore Toner
You can set the machine to ignore the toner empty
message and continue printing except incoming faxes.
3. Useful Setting Menus
198
System setup
13
Item
Clear setting
• Scan Setup
• Scan Default
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Press
•
Or press Setup > Machine Setup > Restore Options on the touch screen.
Restores all of the scan options to the factory
default.
System Setup
Restores all of the system options to the factory
default.
Network Setup
Restores all of the network options to the factory
default. (Reboot required.)
Address Book
Clears all of the email address entries stored in
memory.
• Fax Sent
Clears all records of sent faxes.
To change the menu options:
•
Description
(Menu) > System Setup > Clear Setting on the control panel.
• Sent Report
Item
Description
Email Sent
Clears all records of sent emails.
Clears all records of received faxes.
All Setting
Clears all of the data stored in memory and resets
all of your settings to the factory default.
• Fax Received
Printer Setup
Restores all of the printer options to the factory
default.
• Rcvd Report
Paper Setup
Restores all of the paper options to the factory
default.
• Fax Setup
• Fax Default
• Copy Setup
• Copy Default
• Fax RCV Report
14
Job manage
Restores all of the fax options to the factory
default.
Restores all of the copy options to the factory
default.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
3. Useful Setting Menus
199
System setup
To change the menu options:
•
Press
16
USB setup
(Menu) > System Setup > Job Manage on the control panel.
Item
Description
Active Job
Shows the print job lists that are waiting to be printed.
Store Job
Shows the print job lists that are stored on the disk.
File Policy
If the memory already has the same name when you
entered a new file name, you can rename or overwrite it.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press USB on the touch screen.
Option
Description
15
Print From
Image overwrite
Scan to USB
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
Item
Manual
Views the file list from the File Navigation. Select a file to
print.
Sets scan destination to a USB. You scan the originals and
save the scanned image to a USB device.
File Manage
Views the file list from the File Navigation. Select a file to
delete. You can format the USB device.
Show Space
Shows the remaining space.
(Menu) > System Setup > ImageOverwrite on the control panel.
Description
You can overwrite the embedded USB memory to clear
all of the data stored in.
3. Useful Setting Menus
200
System setup
17
18
Emulation setup
Email setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
(Menu) > Print Setup > Emulation on the control panel.
Item
Emulation Type
Setup
Description
The machine language defines how the computer
communicates with the machine.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press Setup > Machine Setup > Email Setup on the touch screen.
Option
Description
SMTP Server
Sets the SMTP server configuration.
Send to Self
Sets to send the mail to yourself so that you can
back up the email or use as a reminder.
Default To Address
Sets an email destination address as a default one.
Default From
Sets a sender’s email address as a default one.
Default Subject
Sets an email’s subject as a default one.
Sets the detailed settings for the selected emulation type.
3. Useful Setting Menus
201
System setup
Doc Box Feature
19
Address book setup
•
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
panel.
(Menu) > Document Box > Doc Box Feature on the control
Option
Add From Scan
Stores scanned documents in a box. The stored file will be
named automatically as
"yearmonthdayhourminutesecond".
Task From Box
Prints a document from a box.
Press Setup > Machine Setup > Address Book on the touch screen.
Option
Description
PhoneBook
Adds, views, prints or deletes the phone book list. You
also can create a group.
Doc Box Setup
Email
Adds, views, prints or deletes the email list. You also can
create a group.
•
Press
(Menu) > Document Box > Doc Box Setup on the control panel.
Option
20
Document box setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Description
Description
Add From Scan
Sets the default options for storing the document to a
box.
Task From Box
Sets the default options for printing the document from a
box.
3. Useful Setting Menus
202
System setup
21
Option
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
Wireless
Selects this option to use the wireless network.
Clear Setting
Reverts the network settings to the default values.
(Reboot required.)
• Network Conf.
• Network
Configuration
•
Press
(Menu)> Network on the control panel,
•
Or press Setup > Machine Setup > Network Setup on the touch screen.
Option
Description
This list shows information on your machine’s network
connection and configuration.
Net. Activate
You can sets whether to use Ethernet on or off.
Http Activate
You can sets whether to use SyncThru™ Web Service or
not.
Description
Selects the appropriate protocol and configure
parameters to use the network environment.
TCP/IP (IPv4)
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 150).
Ethernet Speed
Configure the network transmission speed.
802.1x
You can selects the user authentication for network
communication. For detailed information consult the
network administrator.
3. Useful Setting Menus
203
Admin setup
Item
Description
Password Protect
Sets the password to access the Admin Setup menu. Select
On to use this option and enter the password.
Change
Password
Changes the machine’s password for accessing the Admin
Setup.
• Clean Fuser: Cleans the fuser by printing a sheet. The
printed sheet has toner debris on it.
• CLR Empty Msg.: Prevents the TonerLow Alert message
from appearing on the display.
• Supplies Info.: Allows you to check how many pages are
printed and how much toner is left in the cartridge.
Maintenance
• TonerLow Alert: If toner in the cartridge has run out, a
message informing the user to change the toner
cartridge appears. You can set the option for this
message to appear or not.
• Ram Disk: Enables/disables RAM disk to manage jobs.
Depending on the installed optional memory size, you
can set the RAM disk size to between 32 and 64 MB. This
option does not appear if you have installed mass storage
device (HDD).
3. Useful Setting Menus
204
Custom setup
This menu appears only when the XOA (eXtensible Open Architecture) web
application is installed. Contact the administrator to use this menu.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 31).
•
Press
(Menu)) > Custom on the control panel.
3. Useful Setting Menus
205
4. Special Features
This chapter explains special copying, scanning, faxing, and printing features.
• Altitude adjustment
207
• Storing email address
208
• Entering various characters
210
• Setting up the fax address book
211
• Registering authorized users
214
• Printing features
215
• Scan features
230
• Fax features
241
• Using shared folder features
252
• Using memory/hard drive features
253
• The procedures in this chapter are mainly based on Windows 7.
• It may be necessary to press OK to navigate to lower-level menus for some models.
Altitude adjustment
Print quality is affected by atmospheric pressure, which is determined by the
height of the machine above sea level. The following information will guide you
on how to set your machine for the best print quality.
Before you set the altitude value, determine the altitude where you are.
4,000 m
(13,123 ft)
• If your machine is connected to the network, you can set the altitude via
SyncThru™ Web Service (see "Using SyncThru™ Web Service" on page
258).
• You can also set the altitude in System Setup option on the machine’s
display (see "Menu overview" on page 31).
1
3,000 m
(9,842 ft)
2
2,000 m
(6,561 ft)
3
1,000 m
(3,280 ft)
4
0
1
2
3
4
High 3
High 2
High 1
Normal
You can set the altitude value from Device Settings in Samsung Easy Printer
Manager program or Machine section in Printer Settings Utility program.
•
For Windows and Macintosh users, see "Device Settings" on page 263.
•
For Linux users, see "Using Smart Panel" on page 266.
4. Special Features
207
Storing email address
You can set up address book with the email addresses you use frequently via
SyncThru™ Web Service and then easily and quickly enter email addresses by
entering the location numbers assigned to them in address book.
6
7
8
1
Click Apply.
If you make a group, click Address Book > E-mail Group > Add Group.
Select the Speed No. and enter Group Name.
Storing on your machine
You can easily add individual address if you check Yes for Add individual(s)
after this group is created.
To scan and send an image as an email attachment, you need to set up email
address using SyncThru™ Web Service.
1
2
3
4
5
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 258).
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
9
2
Searching for an email address
Searching sequentially through memory
1
Click Address Book > Individual > Add.
Select
(scan) >
(Address Book) > Search & Send > Select an
address group > All on the control panel.
Or select Setup > Machine Setup > Next > Address Book > Email >
View List > Individual or Group on the touch screen.
Select the Speed No. and enter e-mail address and fax number.
2
If you need to set SMB or FTP sever information, check SMB or FTP and set
the information.
Click Apply.
Search through the entire memory in index (numerical) order, and select
the name and address you want.
4. Special Features
208
Storing email address
Searching with a particular first letter
1
2
Select
(scan) on the control panel.
3
4
Enter the first few letters of the name you want.
Press
(Address Book) > Search & Send > Select an address group >
ID on the control panel.
Press the arrows until the name and number you want appears.
4. Special Features
209
Entering various characters
As you perform various tasks, you may need to enter names and numbers. For
example, when you set up your machine, you enter your name or your
company’s name, and the fax number. When you store fax numbers or email
addresses in memory, you may also enter the corresponding names.
3
Entering alphanumeric characters
Press the button until the correct letter appears on the display. For example, to
enter the letter O, press 6, labeled with MNO. Each time you press 6, the display
shows a different letter, M, N, O, m, n, o and finally 6. To find the letter that you
want to enter, see "Keypad letters and numbers" on page 210.
• You can enter a space by pressing 1 twice.
• To delete the last digit or character, press the left/right or up/down arrow
button.
Key
Assigned numbers, letters, or characters
1
@/.‘1
2
ABCabc2
3
DEFdef3
4
GHIghi4
5
JKLjkl5
6
MNOmno6
7
PQRSpqrs7
8
TUVtuv8
9
WXYZwxyz9
0
&+-,0
*
*%^_~!#$()[]
(These symbols are available when you type for network authentication.)
#
4
Keypad letters and numbers
#=|?":{}<>;
(These symbols are available when you type for network authentication.)
• Special character sets may differ from your machine depending on its
options or the models.
• Some of the follow key values may not appear depending on the job you
are doing.
4. Special Features
210
Setting up the fax address book
You can set up speed number with the fax numbers you use frequently via
SyncThru™ Web Service and then easily and quickly enter fax numbers by
entering the location numbers assigned to them in address book.
6
Using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number at which you stored the number you want.
5
Registering a speed dial number
1
Select
(fax) >
the control panel.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad for more than 2
seconds.
(Address Book) > New & Edit > Speed Dial on
• For a two- or three-digit speed dial number, press the first digit button(s)
and then hold down the last digit button for more than 2 seconds.
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Individual >
screen.
2
(options) > Add on the touch
• You can print the address book list by selecting
(Address Book) > Print.
Enter a speed dial number and press OK.
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
7
Editing speed dial numbers
(Back).
Enter the name you want and press OK.
Select
(fax) >
the control panel.
Enter the fax number you want and press OK.
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Individual on the touch screen.
1
3
4
5
(fax) >
Press the
(Cancel or Stop/Clear) button to return to ready mode.
2
3
(Address Book) > New & Edit > Speed Dial on
Enter the speed dial number you want to edit and press OK.
Change the name and press OK.
4. Special Features
211
Setting up the fax address book
4
5
Change the fax number and press OK.
Press
7
When you have finished, select No when Another Number? appears
and press OK.
8
Press
(Cancel or Stop/Clear) to return to ready mode.
(Cancel or Stop/Clear) to return to ready mode.
8
Registering a group dial number
9
Editing group dial numbers
1
Select
(fax) >
the control panel.
(Address Book) > New & Edit > Group Dial on
1
Or select Setup > Machine Setup > Next >Address Book > Phone
Book > View List > Group>
screen.
2
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press
(Back).
3
Search by entering the first few letters of the speed dial’s name to put in
the group.
4
5
6
Select the name and number you want and press OK.
Select Yes when Another Number? appears.
(Address Book) > New & Edit > Group Dial on
Or select Setup > Machine Setup > Next > Address Book > Phone
Book > View List > Group on the touch screen.
(options) > Add on the touch
Enter a group dial number and press OK.
Select
(fax) >
the control panel.
2
3
Enter the group dial number you want to edit and press OK.
Enter a new speed dial number to add and press OK, then Add? appears.
Enter a speed dial number stored in the group and press OK, Delete?
appears.
4
5
6
7
Press OK to add or delete the number.
Repeat step 3 to add or delete more numbers.
Select No at the Another Number? and press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
Repeat step 3 to include other speed dial numbers into the group.
4. Special Features
212
Setting up the fax address book
10
Searching address book for an entry
There are two ways to search for a number in memory. You can either scan from
A to Z sequentially, or you can search by entering the first letters of the name
associated with the number.
1
Select ct
(fax) >
(Address Book) > Search&Dial > Speed Dial
or Group Dial on the control panel.
2
3
Enter All or ID and press OK.
Press the name and number or the keypad button labeled with the letter
you want to search.
For example, if you want to find the name “MOBILE,” press the 6 button,
which is labeled with “MNO.”
4
Press
(Cancel or Stop/Clear) to return to ready mode.
11
Printing address book
You can check your
1
2
Select ct
(Address Book) settings by printing a list.
(fax) >
(Address Book) > Print on the control panel.
The machine begins printing.
4. Special Features
213
Registering authorized users
If you have connected your machine to a network and set up the network
parameters correctly, you can scan and send images over the network. To send
a scanned image through email or via network server safely, you must register
account information of authorized users to your local machine using SyncThru™
Web Service.
1
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 258).
2
3
Click Login on the upper right of the SyncThru™ Web Service website.
You can easily add individual address if you check Yes for Add individual(s)
after this group is created.
9
Click Apply.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
4
5
Click Security > User Access Control > Authentication.
6
7
8
Click OK in the confirmation pop-up window.
Select Local Authentication in the Authentication Method, and click
Apply.
Click User Profile > Add.
Enter User Name, Login ID, Password, Confirm Password, E-mail
Address, and Fax Number.
4. Special Features
214
Printing features
• For basic printing features, refer to the Basic Guide (see "Basic printing"
on page 55).
If you want to change the settings for each print job, change it in Printing
Preferences.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
13
Setting your machine as a default machine
12
Changing the default print settings
1
2
3
4
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Right-click on your machine.
1
2
3
4
Click the Windows Start menu.
Select Control Panel > Devices and Printers.
Select your machine.
Right-click your machine and select Set as Default Printer.
Select Printing preferences.
If Printing preferences has a ▶, you can select other printer drivers
connected to the selected printer.
If Printing preferences has a ▶, you can select other printer drivers
connected to the selected printer.
5
6
Change the settings on each tab.
Click OK.
4. Special Features
215
Printing features
14
Using advanced print features
1
Check the Print to file box in the Print window.
2
3
Click Print.
XPS printer driver: used to print XPS file format.
• See "Features by models" on page 7.
• The XPS printer driver can be installed only on Windows Vista OS or
higher.
• Install optional memory when an XPS job does not print because the
printer is out of memory.
• For models that provide XPS driver on the software CD:
- You can install the XPS printer driver when you insert the software CD
into your CD-ROM drive. When the installation window appears,
select Advanced Installation > Custom Installation. You can select
the XPS printer driver in the Select Software and Utilities to Install
window.
• For models that provide XPS driver from the Samsung website,
www.samsung.com > find your product> Support or downloads.
Type in the destination path and the file name, and then click OK.
For example, c:\Temp\file name.
Printing to a file (PRN)
You will sometimes need to save the print data as a file.
If you type in only the file name, the file is automatically saved in My
Documents, Documents and Settings, or Users. The saved folder may
differ, depending on your operating system or the application you are
using.
4. Special Features
216
Printing features
Understanding special printer features
You can use advanced printing features when using your machine.
To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print
settings. The machine name, that appears in the printer properties window may differ depending on the machine in use.
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Select the Help menu or click the
on page 58).
Item
Multiple Pages per
Side
button from the window or press F1 on your keyboard and click on any option you want to know about (see "Using help"
Description
Selects the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and
arranged in the order you specify. You can print up to 16 pages on one sheet.
4. Special Features
217
Printing features
Item
Poster Printing
Description
Prints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets
together to form one poster-size document.
Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab
to make it easier to paste the sheets together.
Prints your document on both sides of a sheet of paper and arranges the pages so that the paper can be folded in half after printing to produce
a booklet.
Booklet Printinga
• If you want to make a booklet, you need to print on Letter, Legal, A4, US Folio, or Oficio sized print media.
8
9
• The Booklet Printing option is not available for all paper sizes. Select the available paper Size option under the Paper tab to see what
paper sizes are available.
• If you select an unavailable paper size, this option can be automatically canceled. Select only available paper (paper without
mark).
• Double-sided
Printing
• Double-sided
Printing (Manual)a
or
Print on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented.
• You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper
• If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of
the document first. After that, a message appears on your computer.
• Skip Blank Pages feature does not work when you select the duplex option.
4. Special Features
218
Printing features
Item
Description
• Double-sided
Printing
• Printer Default: If you select this option, this feature is determined by the settings you have selected on the control panel of the machine.
This option is available only when you use the PCL/XPS printer driver.
• Double-sided
• None: Disables this feature.
a
Printing (Manual)
• Long Edge: This option is the conventional layout used in bookbinding.
• Short Edge: This option is the conventional layout used in calendars.
• Reverse Double-Sided Printing: Check this option to reverse the print order when duplex printing. This option is not available when you
use Double-sided Printing (Manual).
Paper Options
Changes the size of a document to appear larger or smaller on the printed page by entering in a percentage by which to enlarge or decrease the
document.
Watermark
The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters
reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document.
4. Special Features
219
Printing features
Item
Watermark
(Creating a
watermark)
Watermark
(Editing a watermark)
Watermark
(Deleting a
watermark)
Description
a To change the print settings from your software application, access Printing Preferences.
b Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
c Enter a text message in the Watermark Message box.
You can enter up to 256 characters. The message displays in the preview window.
a
b
c
d
e
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options.
Click Update to save the changes.
Click OK or Print until you exit the Print window.
a
b
c
d
To change the print settings from your software application, access Printing Preferences.
Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears.
Select the watermark you want to delete from the Current Watermarks list and click Delete.
Click OK or Print until you exit the Print window.
This option is available only when you use the PCL/SPL printer driver (see "Software" on page 7).
Overlaya
An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document.
Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing
exactly the same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load
preprinted letterhead paper in the machine: just print the letterhead overlay on your document.
To use a page overlay, you must create a new page overlay containing your logo or image.
• The overlay document size must be the same as the document you print with the overlay. Do not create an overlay with a watermark.
• The resolution of the overlay document must be the same as that of the document you will print with the overlay.
4. Special Features
220
Printing features
Item
Overlaya
(Creating a new page
overlay)
Description
a
b
c
d
To save the document as an overlay, access Printing Preferences.
Click the Advanced tab, and select Edit from the Text drop-down list. Edit Overlay window appears.
In the Edit Overlay window, click Create.
In the Save As window, type a name up to eight characters in the File name box. Select the destination path, if necessary (The default is
C:\Formover).
e Click Save. The name appears on the Overlay List.
f Click OK or Print until you exit the Print window.
The file is not printed. Instead, it is stored on your computer hard disk drive.
a Click the Advanced tab.
b Select the desired overlay from the Text drop-down list.
c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you
want to use.
If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window.
Overlaya
After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay
(Using a page overlay)
List box.
d If necessary, check Confirm Page Overlay When Printing box. If this box is checked, a message window appears each time you submit a
document for printing, asking you to confirm printing an overlay on your document.
If this box is not checked and an overlay has been selected, the overlay automatically prints with your document.
e Click OK or Print until you exit the Print window.
Overlaya
(Deleting a page
overlay)
a
b
c
d
e
f
In the Printing Preferences window, click the Advanced tab.
Select Edit in the Text drop down list.
Select the overlay you want to delete from the Overlay List box.
Click Delete.
When a confirming message window appears, click Yes.
Click OK or Print until you exit the Print window. You can delete page overlays that you no longer use.
4. Special Features
221
Printing features
Item
Description
•
This feature is available only if you have installed the optional memory or mass storage device (HDD) (see "Variety feature" on page
10).
• Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
• Print Mode: The default Print Mode is Normal, which is for printing without saving the printing file in the memory.
- Normal: This mode prints without storing your document in the optional memory.
Print Mode
- Proof: This mode is useful when you print more than one copy. You can print one copy first to check, then print the rest of the copies later.
- Confidential: This mode is used for printing confidential documents. You need to enter a password to print.
- Store: Select this setting to save a document in the mass storage device (HDD) without printing.
- Store and Print: This mode is used when printing and storing document at the same time.
- Spool: This option can be useful when handling large amounts of data. If you select this setting, the printer spools the document into the
mass storage device (HDD) and then prints it from the mass storage device (HDD) queue, decreasing the computer’s work load.
- Print Schedule: Select this setting to print the document at a specified time.
• User ID: This option is used when you need to find a saved file using the control panel.
• Job Name: This option is used when you need to find a saved file using the control panel.
Encrypts printing data first, and transmits it to the machine. This feature protects the printing information even though the data is snatched on
a network.
Job Encryption
Job Encryption feature is enabled only when the mass storage device (HDD) is installed. The mass storage device (HDD) is used to
decrypt the printing data (see "Variety feature" on page 10).
a. This option is not available when you use XPS driver.
4. Special Features
222
Printing features
Printing
15
Using Direct Printing Utility
There are several ways you can print using the Direct Printing Utility.
•
Direct Printing Utility may not be available depending on model or
optional goods (see "Software" on page 7).
1
• Available for Windows OS users only.
The Direct Printing Utility window appears.
2
Select your machine from the Select Printer drop-down list and click
Browse.
3
Select the file you wish to print and click Open.
What is Direct Printing Utility?
Direct Printing Utility is a program that sends the PDF files directly to your
machine to print without having to opening the file.
To install this program, select Advanced Installation > Custom Installation
and put a check mark in this program when you install the printer driver.
• Mass storage device (HDD) should be installed on your machine, to print
files using this program. (see "Variety feature" on page 10).
• You cannot print PDF files that are restricted. Deactivate the printing
restriction feature and retry printing.
• You cannot print PDF files that are restricted by a password. Deactivate
the password feature, and retry printing.
• Whether or not a PDF file can be printed using the Direct Printing Utility
program depends on how the PDF file was created.
• The Direct Printing Utility program supports PDF version 1.7 and below.
For higher versions, you must open the file to print it.
From the Start menu select Programs or All Programs > Samsung
Printers > Direct Printing Utility > Direct Printing Utility.
The file is added in the Select Files section.
4
5
Customize the machine settings for your needs.
Click Print. The selected PDF file is sent to the machine.
Using the right-click menu
1
Right-click on the PDF file to print and select Direct Printing.
The Direct Printing Utility window appears with the PDF file is added.
2
3
Select the machine to use.
Customize the machine settings.
4. Special Features
223
Printing features
4
Click Print. The selected PDF file is sent to the machine.
Changing printer settings
You can use advanced printing features when using your machine.
16
Macintosh printing
Some features may not be available depending on models or options. It
means that the features are not supported.
Open an application and select Print from the File menu. The machine name,
which appears in the printer properties window, may differ depending on the
machine in use. Except for the name, the composition of the printer properties
window is similar to the following.
Printing multiple pages on one sheet
Printing a document
When you print with a Macintosh, you need to check the printer driver settings
in each application you use. Follow the steps below to print from a Macintosh:
1
2
Open the document to print.
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft copies.
1
2
Open an application, and select Print from the File menu.
3
4
Select the other options to use.
Open the File menu and click Page Setup (Document Setup in some
applications).
3
Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
4
5
6
Open the File menu and click Print.
Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
Click Print.
The machine prints the selected number of pages to print on one sheet
of paper.
Choose the number of copies and indicate which pages to print.
Click Print.
4. Special Features
224
Printing features
Printing on both sides of the paper
Some features may not be available depending on models or options. It
means that the features are not supported (see "Variety feature" on page
10).
Using help
Click the question mark on the bottom-left corner of the window and click on
the topic you want to know about. A pop-up window appears with information
about that option's feature, which is provided from the driver.
Before printing in the duplex mode, decide on which edge you will be binding
your finished document. The binding options are, as follows:
•
Long-Edge Binding: This option is the conventional layout used in book
binding.
•
Short-Edge Binding: This option is the type often used with calendars.
1
2
3
4
5
From your Macintosh application, select Print from the File menu.
Select Layout from the drop-down list under Orientation.
17
Select a binding orientation from the Two-Sided option.
Linux printing
Select the other options to use.
Click Print and the machine prints on both sides of the paper.
Some features may not be available depending on models or options. It
means that the features are not supported.
If you print more than 2 copies, the first copy and the second copy might
print on the same sheet of paper. Avoid printing on both sides of paper
when you are printing more than 1 copy.
4. Special Features
225
Printing features
Printing from applications
There are a lot of Linux applications that allow you to print using Common UNIX
Printing System (CUPS). You can print on your machine from any such
application.
1
2
3
Open an application, and select Print from the File menu
4
Change the print job properties using the following four tabs displayed
at the top of the window.
•
5
6
7
•
General: Changes the paper size, the paper type, and the
orientation of the documents. It enables the duplex feature, adds
start and end banners, and changes the number of pages per sheet.
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
•
•
Text: Specifies the page margins and set the text options, such as
spacing or columns.
Graphics: Sets image options that are used when printing image
files, such as color options, image size, or image position.
Click Apply to apply the changes and close the Properties window.
Click OK in the LPR GUI window to start printing.
The Printing window appears, allowing you to monitor the status of your
print job.
To abort the current job, click Cancel.
Select Print directly using lpr.
In the LPR GUI window, select the model name of your machine from the
printer list and click Properties.
Advanced: Sets the print resolution, paper source, and destination.
Printing files
You can print many different types of files on your machine using the standard
CUPS, directly from the command line interface. The CUPS lpr utility allows you
to do that, but the driver’s package replaces the standard lpr tool by a much
more user-friendly LPR GUI program.
To print any document file:
1
Enter lpr <file_name> from the Linux shell command line and press
Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to print
window appears first. Just select any files you want to print and click
Open.
2
In the LPR GUI window, select your machine from the list, and change
the print job properties.
3
Click OK to start printing.
4. Special Features
226
Printing features
Configuring Printer Properties
Using the Printer Properties window provided by the Printers configuration,
you can change the various properties for your machine as a printer.
1
4
18
Unix printing
Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2
3
Click OK to apply the changes and close the Printer Properties window.
Some features may not be available depending on models or options. It
means that the features are not supported (see "Features by models" on
page 7).
Select your machine on the available printers list and click Properties.
The Printer Properties window appears.
The following five tabs display at the top of the window:
•
•
•
•
•
General: Allows you to change the printer location and name. The
name entered in this tab displays on the printer list in Printers
configuration.
Connection: Allows you to view or select another port. If you change
the machine port from USB to parallel or vice versa while in use, you
must re-configure the machine port in this tab.
Proceeding the print job
After installing the printer, choose any of the image, text, PS or HPGL files to
print.
1
For example, if you are printing “document1”
Driver: Allows you to view or select another machine driver. By
clicking Options, you can set the default device options.
Jobs: Shows the list of print jobs. Click Cancel job to cancel the
selected job and select the Show completed jobs check box to see
previous jobs on the job list.
Classes: Shows the class that your machine is in. Click Add to Class
to add your machine to a specific class or click Remove from Class
to remove the machine from the selected class.
Execute “printui <file_name_to_print>” command.
printui document1
This will open the UNIX Printer Driver Print Job Manager in which the
user can select various print options.
2
3
4
Select a printer that has been already added.
Select the printing options from the window such as Page Selection.
Select how many copies are needed in Number of Copies.
4. Special Features
227
Printing features
To take advantage of the printer features provided by your printer driver,
press Properties.
5
Press OK to start the print job.
Automatic/manual duplex printing may not be available depending on
models. You can alternatively use the lpr printing system or other
applications for odd-even printing.
•
Multiple pages: Print several pages on one side of the paper.
•
Page Border: Choose any of the border styles (e.g., Single-line hairline,
Double-line hairline)
Changing the machine settings
The UNIX printer driver Print Job Manager in which the user can select various
print options in printer Properties.
The following hot keys may also be used: “H” for Help, “O” for OK, “A” for Apply,
and “C” for Cancel.
General tab
•
Paper Size: Set the paper size as A4, Letter, or other paper sizes, according
to your requirements.
•
Paper Type: Choose the type of the paper. Options available in the list box
are Printer Default, Plain, and Thick.
•
Paper Source: Select from which tray the paper is used. By default, it is Auto
Selection.
•
Orientation: Select the direction in which information is printed on a page.
•
Duplex: Print on both sides of paper to save paper.
Image tab
In this tab, you can change the brightness, resolution, or image position of your
document.
Text tab
Set the character margin, line space, or the columns of the actual print output.
HPGL/2 tab
•
Use only black pen: To print all graphics in black.
•
Fit plot to page: Fit the entire graphic into a single page.
4. Special Features
228
Printing features
Margins tab
•
Use Margins: Set the margins for the document. By default, margins are not
enabled. The user can change the margin settings by changing the values in
the respective fields. Set by default, these values depend on the page size
selected.
•
Unit: Change the units to points, inches, or centimeters.
Printer-Specific Settings tab
Select various options in the JCL and General frames to customize various
settings. These options are specific to the printer and depend on the PPD file.
4. Special Features
229
Scan features
• For basic scanning features, refer to the Basic Guide (see "Basic scanning"
on page 65).
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• The maximum resolution that can be achieved depends upon various
factors, including computer speed, available disk space, memory, the
size of the image being scanned, and bit depth settings. Thus,depending
on your system and what you are scanning, you may not be able to scan
at certain resolutions, especially using enhanced dpi.
19
You can scan the originals with your machine via an USB cable or the network.
The following methodoloqies can be used for scanning your documents:
•
Scan to PC: Scan the originals from the control panel. Then, the scanned
data will be stored in the connected computers My Documents folder (see
"Basic Scanning" on page 65).
•
TWAIN: TWAIN is the one of a preset imaging applications. Scanning an
image launches the selected application, enabling you to control the
scanning process. This feature can be used via the local connection or the
network connection (see "Scanning from image editing program" on page
234).
•
Samsung Scan Assistant/SmarThru 4/SmarThru Office: You can use this
program to scan images or documents.
Basic scanning method
This feature may not be available depending on model or optional goods
(see "Variety feature" on page 10).
-
See "Scanning with Samsung Scan Assistant" on page 235.
-
See "Scanning with SmarThru 4" on page 236
-
See "Scanning with SmarThru Office" on page 236
•
WIA: WIA stands for Windows Images Acquisition. To use this feature, your
computer must be connected directly with the machine via an USB cable
(see "Scanning using the WIA driver" on page 235).
•
USB Memory: You can scan a document and save the scanned image onto
an USB memory device.
•
Email: You can send the scanned image as an email attachment (See
"Scanning to email" on page 232).
•
FTP/SMB: You can scan an image and upload it to an FTP/SMB server (see
"Scanning to FTP/SMB server" on page 233).
4. Special Features
230
Scan features
20
21
Setting the scan settings in the computer
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
1
Open Samsung Easy Printer Manager (see "Using Samsung Easy
Printer Manager" on page 261).
2
3
4
Select the appropriate machine from the Printer List.
5
Scanning from network connected machine
Make sure the printer driver is installed on your computer using the software CD,
since the printer driver includes the scan program (see "Installing the driver
locally" on page 28).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
2
Select
Or select Scan > Network PC on the touch screen.
Select Scan to PC Settings menu.
Select the option you want.
•
Scan Activation: Determines whether or not scanning is enabled on
the device.
•
Profile: Displays the scanning profiles saved on the selected device.
•
Basic tab: Contains settings related to general scan and device
settings.
•
Image tab: Contains settings related to image altering.
(Scan) > Scan to PC > Network PC on the control panel.
If you see Not Available message, check the port connection.
3
Select your registered computer ID, and enter the Password if
necessary.
Press OK.
4. Special Features
231
Scan features
• ID is the same ID as the registered scan ID for Samsung Easy Printer
Manager >
Switch to advanced mode > Scan to PC Settings.
Setting up an email account
1
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 258).
2
3
4
5
Select Settings > Network Settings and Outgoing Mail Server(SMTP).
6
7
Enter the SMTP server login name and password.
• Password is the 4 digit number registered password for Samsung Easy
Printer Manager >
Switch to advanced mode > Scan to PC
Settings.
4
5
Select the option you want and press OK.
Scanning begins.
Scanned image is saved in computer’s C:\Users\users
name\Pictures\folder. The saved folder may differ, depending on your
operating system or the application you are using.
Enter the IP address in dotted decimal notation or as a host name.
Enter the server port number, from 1 to 65535.
Check the box next to SMTP Requires Authentication to require
authentication.
Press Apply.
• If the authentication method of SMTP server is POP3 before SMTP, put a
check mark of SMTP Requires POP Before SMTP Authentication.
22
Scanning to email
• Enter the IP address and port number.
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
4. Special Features
232
Scan features
Scanning and sending an email
23
Scanning to FTP/SMB server
1
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Select
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
(scan) > Scan to Email on the control panel.
Or select Scan > Send Email on the touch screen.
3
4
Enter the login name and password if you configured on SyncThru™ Web
Service (see "Using SyncThru™ Web Service" on page 258).
Enter the sender’s and recipient’s email address.
You can send an email to yourself by activating the Auto Send To Self
option in the Settings > Scan > Scan To E-mail on SyncThru™ Web Service.
5
6
7
8
Enter an email subject and press OK.
Select the file format to scan, and press OK.
Enter the SMTP server login name and password.
The machine begins scanning and then sends the email.
Setting up an FTP/SMB server
1
Access the SyncThru™ Web Service (see "Using SyncThru™ Web Service"
on page 258).
2
3
4
5
6
Select Address Book > Individual > Add.
7
8
Enter the login name and password.
Check the box next to Add FTP or Add SMB.
Enter the IP address in dotted decimal notation or as a host name.
Enter the server port number, from 1 to 65535.
Check the box next to Anonymous, then the server permits the access
of unauthorized people.
Enter the domain name if your server is joined to the certain domain,
otherwise just enter your computer name which is registered to the SMB
server.
4. Special Features
233
Scan features
9
Enter the path for saving the scanned image.
24
Scanning from image editing program
• The folder to save the scanned image must be on the root.
• The folder properties need to be setup as a share.
• Your user name should have the rights to read and write the folder.
10
Press Apply.
Scanning and sending to FTP/SMB server
1
2
3
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
4
5
6
Open an application, such as Adobe Photoshop.
Make sure that your machine is connected to a network.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Select
(scan) > Scan to SMB or Scan to FTP on the control panel.
Or select Scan > SMB or FTP on the touch screen.
4
5
You can scan and import documents at the image editing software such as
Adobe Photoshop, if the software is TWAIN-compliant. Follow the steps below
to scan with TWAIN-compliant software:
Click File > Import, and select the scanner device.
Set the scan options.
Scan and save your scanned image.
Select a server and scan format you want.
The machine begins scanning and then sends the scanned image to the
specified server.
4. Special Features
234
Scan features
25
Scanning using the WIA driver
Your machine supports the Windows Image Acquisition (WIA) driver for
scanning images. WIA is one of the standard components provided by Microsoft
Windows 7 and works with digital cameras and scanners. Unlike the TWAIN
driver, the WIA driver allows you to scan and easily adjust images without using
additional software:
6
Choose your scanning preferences and click Preview to see your
preferences affect the picture.
7
Scan and save your scanned image.
26
Scanning with Samsung Scan Assistant
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
The WIA driver works only on Windows OS (not supported Windows 2000)
with a USB port.
1
2
3
4
5
Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Click Start > Control Panel > Hardware and Sound > Devices and
Printers.
Right-click on device driver icon in Printers and Faxes > Start Scan.
New Scan application appears.
• You can use the OCR (Optical Character Reader) feature from Samsung
Scan Assistant program.
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
Click Start > All programs > Samsung Printers, and start Samsung
Scan Assistant.
Select the Help menu or click the
button from the window and click on
any option you want to know about.
4. Special Features
235
Scan features
4
5
•
Set the scan options.
Print: You can print images you have saved.
Click Scan.
Select the Help menu or click the
button from the window and click on
any option you want to know about.
27
Scanning with SmarThru 4
5
6
7
8
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• You can use the OCR (Optical Character Reader) feature from SmarThru 4
program.
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
4
Double-click the SmarThru 4 icon.
The SmarThru appears.
•
Scan to: You can scan an image and save it to an application or
folder, email it, or publish it on a web site.
•
Image: You can edit an image and send it to a selected application
or folder, email it, or publish it on a web site.
Click Scan to.
Select destination among Application, E-mail, Folder, OCR, or Web.
If needed, click Settings to customize the settings.
Click Scan.
28
Scanning with SmarThru Office
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• To use SmarThru Office, you have to install the program manually from
the supplied CD. Select Advanced Installation > Custom Installation
and choose SmarThru Office to install.
• You can use the OCR (Optical Character Reader) feature from SmarThru
Office program.
4. Special Features
236
Scan features
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
4
Double-click the SmarThru Office icon.
The SmarThru Office appears.
29
Macintosh scanning
Scanning from USB connected machine
1
Make sure that the machine is connected to your computer and
powered on.
2
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
3
Start Applications and click Image Capture.
Click the Help or
button from the window and click on any option you
want to know about.
5
Click the SmarThru Office icon (
) in the tray area of the Windows
taskbar to activate the SmarThru Office launcher.
6
7
8
Click the scanning icon (
If No Image Capture device connected message appears, disconnect the
USB cable and reconnect it. If the problem continues, refer to the Image
Capture’s help.
) to open the scanning window.
The Scan Setting window opens.
Set scan settings and click Scan.
4
5
Select the option you want.
Scan and save your scanned image.
If scanning does not operate in Image Capture, update Mac OS to the latest
version. Image Capture operates properly in Mac OS X 10.4.7 or higher.
4. Special Features
237
Scan features
Scanning from network connected machine
•
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
For 10.7, select your device below SHARED.
Network or wireless model only (see "Features by models" on page 7).
1
2
3
4
5
6
Make sure that your machine is connected to a network.
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
Set the scan options on this program.
Scan and save your scanned image.
• If scanning does not operate in Image Capture, update Mac OS to the
latest version. Image Capture operates properly Mac OS X 10.4.7 or
higher.
Start Applications and click Image Capture.
• For more information, refer to the Image Capture’s help.
According to OS, follow steps below.
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
•
For 10.4
-
Click Devices > Browse Devices on Menu bar.
-
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked.
-
Click Connect.
If a warning message appears, click Change Port.. to select port,
or If TWAIN UI appears, click Change Port.. from the Preference
tab and select a new port.
•
30
Linux scanning
Scanning
1
Make sure that the machine is connected to your computer and
powered on.
2
3
Double-click the Unified Driver Configurator on your desktop.
For 10.5
-
Click Devices > Browse Devices on Menu bar.
-
Make sure that Connected checkbox is checked beside your
machine in Bonjour Devices.
Click the
button to switch to Scanners Configuration.
4. Special Features
238
Scan features
4
Select the scanner on the list.
5
6
Click Properties.
7
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 52).
From the Scanner Properties window, click Preview.
8
The document is scanned and the image preview appears in the
Preview Pane.
9
Drag the pointer to set the image area to be scanned in the Preview
Pane.
10
11
Select the option you want.
Scan and save your scanned image.
For later use, you can save as your scan settings and add it to the Job Type
drop-down list.
4. Special Features
239
Scan features
Editing an image with Image Manager
The Image Manager application provides you with menu commands and tools
to edit your scanned image.
4. Special Features
240
Fax features
32
• For basic faxing features, refer to the Basic Guide (see "Basic faxing" on
page 66).
Redialing the fax number
• This function is not supported for SCX-470x Series (see "Features by
models" on page 7).
1
2
Press
(Redial/Pause) button on the control panel.
Select the fax number you want.
Ten recently sent fax numbers with ten received Caller IDs are shown.
31
Automatic redialing
3
When the number you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number. The redial time depends on
the country's factory default setting.
When the display shows Retry Redial?, press
When an original is loaded in the document feeder, the machine
automatically begins to send.
If an original is placed on the scanner glass, select Yes to add another
page. Load another original and press OK. When you have finished,
select No when Another Page? appears.
(Start) button to redial the
33
number without waiting. To cancel the automatic redialing, press
(Cancel
or Stop/Clear).
To change the time interval between redials and the number of redial attempts.
1
Press
panel.
(fax) >
(Menu)> Fax Setup > Sending on the control
Confirming a transmission
When the last page of your original has been sent successfully, the machine
beeps and returns to ready mode.
When something goes wrong while sending your fax, an error message appears
on the display. If you receive an error message, press
2
3
Select Redial Times or Redial Term you want.
(Cancel or Stop/Clear)
to clear the message and try to send the fax again.
Select the option you want.
4. Special Features
241
Fax features
You can set your machine to print a confirmation report automatically each
time sending a fax is completed. Press
(fax) >
> Sending > Send Report on the control panel.
(Menu) > Fax Setup
4
5
Click Print or OK.
Enter the recipients’ numbers and select the option
34
Sending a fax in the computer
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
You can send a fax from your computer without going to the machine.
To send a fax from your computer, the Samsung Network PC Fax program
must be installed. This program will be installed when you installed the printer
driver.
1
2
Open the document to be sent.
Select Print from the File menu.
The Print window will be displayed. It may look slightly different
depending on your application.
3
Select the Help menu or click the
button from the window and click on
any option you want to know about.
6
Click Send.
Select Samsung Network PC Fax from the Print window
4. Special Features
242
Fax features
35
Delaying a fax transmission
8
If you set a time earlier than the current time, the fax will be sent at that time
on the following day.
You can set your machine to send a fax at a later time when you will not be
present. You cannot send a color fax using this feature.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
3
4
Press
9
The original is scanned into memory before transmission.
The machine returns to ready mode. The display reminds you that you
are in ready mode and that a delayed fax is set.
(fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs.
You can check the list of delayed fax jobs.
Press
Press
panel.
(Menu) > Fax Feature > Delay Send on the control panel.
Or select Fax > Delayed Send > To on the touch screen.
5
6
7
Enter the job name and the time.
(Menu) > System Setup > Report > Schdule Jobs on the control
Enter the number of the receiving fax machine and press OK.
The display asks you to enter another fax number to send the document.
To enter more fax numbers, press OK when Yes highlights and repeat
steps 5.
• You can add up to 10 destinations.
• Once you entered a group dial number, you cannot enter another group
dial numbers anymore.
Adding documents to a reserved fax
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
Press
panel.
3
Select the fax job and press OK.
(fax) >
(Menu) > Fax Feature > Add Pages on the control
When you have finished, select No when Another Page? appears. The
machine scans the original into memory.
4. Special Features
243
Fax features
4
Press
(Cancel or Stop/Clear) to return to ready mode.
Canceling a reserved fax job
1
2
3
Press
panel.
(fax) >
2
Press
(Fax) >
control panel.
(Menu) > Fax Feature > Priority Send on the
Or select Fax > Priority Send > To on the touch screen.
3
4
5
Select the fax job you want and press OK.
Press OK when Yes highlights.
Press
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
(Menu) > Fax Feature > Cancel Job on the control
The selected fax is deleted from memory.
4
1
(Stop/Clear) to return to ready mode.
Enter the destination fax number and press OK.
Enter the job name and press OK.
If an original is placed on the scanner glass, select Yes to add another
pages. Load another original and press OK.
When you have finished, select No when Another Page? appears.
The machine starts to scan and send a fax to destinations.
36
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of reserved
operations. The original is scanned into memory and immediately transmitted
when the current operation is finished.
37
Forwarding a sent fax to another destination
You can set the machine to forward the received or sent fax to other destination
by a fax, an email or a server. If you are out of office but have to receive the fax,
this feature may be useful.
4. Special Features
244
Fax features
38
• When you forward a fax by an email, you must first set the mail server and
IP address in SyncThru™ Web Service (see "Using SyncThru™ Web
Service" on page 258).
• Though you sent or received a color fax, the data is forwarded in
grayscale.
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
Press
(fax) >
(Menu) > Fax Feature > Forward > Fax > Send
Forward > On on the control panel.
Forwarding a received fax
You can set the machine to forward the received or sent fax to other destination
by a fax, an email or a server. If you are out of office but have to receive the fax,
this feature may be useful.
Though you sent or received a color fax, the data is forwarded in grayscale.
1
Or select Setup > Machine Setup > Fax Setup > Forward > Fax, Email,
or Server > Send Forward > On on the touch screen.
Or select Setup > Machine Setup > Fax Setup > Forward > Fax, Email,
or Server > Receive Forward > On on the touch screen.
Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
3
Enter the destination fax number, email address, or server address and
press OK.
4
Press
(Cancel or Stop/Clear) to return to ready mode.
Subsequent sent faxes will be forwarded to the specified fax machine.
Press
(fax) >
(Menu) > Fax Feature > Forward > Fax, Email, or
Server > Receive Forward > Forward on the control panel.
Forward options may not be available depending on model or optional
goods (see "Variety feature" on page 10).
2
To set the machine to print out a fax when fax forwarding has been
completed, select Forward & Print.
3
Enter the destination fax number, email address, or server address and
press OK.
4
Enter the starting tim and ending time, then press OK.
4. Special Features
245
Fax features
5
Press
(Cancel or Stop/Clear) to return to ready mode.
3
Press OK.
Subsequent sent faxes will be forwarded to the specified fax machine.
40
Receiving a fax in the computer
39
Sending faxes on both sides of paper
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• This is available only when you load originals into the document feeder.
• To use this feature, set the option on the control panel:
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
Press
(fax) >
(Menu) > Fax Feature > Forward > PC > On the
control panel.
Or select Setup > Machine Setup > Next > Fax Setup > Forward > PC
> On on the touch screen.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
Press
(fax) > Duplex on the control panel.
Or select Fax > Select the menu you want > Select Duplex from the submenus > on the touch screen.
1
2
3
4
Open the Samsung Easy Printer Manager.
Select the appropriate machine from the Printer List.
Select Fax to PC Settings menu.
Use Set Fax Receiving to change the fax settings.
•
Off: Send faxes in normal mode.
•
2 Side: Send faxes on both sides of the original.
•
Enable Fax Receiving From Device: Select whether to use or not.
•
2->1Side ROT2: Send faxes on both sides of the original and prints
each one on a separate sheet, but the information on the back side
of the printout is rotated 180°.
•
Image Type: Convert the received faxes to PDF or TIFF.
•
Save Location: Select location to save the converted faxes.
•
Prefix: Select file or folder scheme as prefix.
4. Special Features
246
Fax features
5
•
Print received fax: After receiving the fax, set prints information for
the received fax.
•
Notify me when complete: Set to show the popup window to
notify receiving a fax.
•
Open with default application: After receiving the fax, open it with
default application.
•
None: After receiving a fax, the machine does not notify the user or
opens the application.
•
To use the Ans/Fax mode, attach an answering machine to the EXT socket
on the back of your machine.
•
Press OK.
41
Changing the receive modes
1
Press
(fax) >
(Menu) > Fax Setup > Receiving > Receive Mode
on the control panel.
Or select Setup > Machine Setup > Next > Default Setting > Fax
Default > Common > Receive Mode on the touch screen.
2
Select the option you want.
•
Fax: Answers an incoming fax call and immediately goes into the fax
reception mode.
•
Tel: Receives a fax by pressing
Ans/Fax: Is for when an answering machine attached to your
machine. Your machine answers an incoming call, and the caller can
leave a message on the answering machine. If the fax machine
senses a fax tone on the line, the machine automatically switches to
Fax mode to receive the fax.
DRPD: you can receive a call using the Distinctive Ring Pattern
Detection (DRPD) feature. Distinctive Ring is a telephone company
service which enables an user to use a single telephone line to
answer several different telephone numbers. For further details, see
"Receiving faxes using DRPD mode" on page 248.
This setting may not be available depending on your country.
3
4
Press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
(On Hook Dial) and then Start.
4. Special Features
247
Fax features
42
44
Receiving manually in Tel mode
You can receive a fax call by pressing
pressing
(On Hook Dial) button and then
(Start) when you hear a fax tone. If your machine has a handset,
you can answer calls using the handset (see "Features by models" on page 7).
Receiving faxes with an extension telephone
When you are using an extension telephone connected to the EXT socket, you
can receive a fax from someone you are talking to on the extension telephone,
without going to the fax machine.
When you receive a call on the extension phone and hear fax tones, press the
keys *9* on the extension phone. The machine receives the fax.
43
Receiving in Answering Machine/Fax mode
*9* is the remote receive code preset at the factory. The first and the last
asterisks are fixed, but you can change the middle number to whatever you
want.
To use this mode, you must attach an answering machine to the EXT socket on
the back of your machine. If the caller leaves a message, the answering machine
stores the message. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.
• If you have set your machine to this mode and your answering machine
is switched off, or no answering machine is connected to EXT socket,
your machine automatically goes into Fax mode after a predefined
number of rings.
• If the answering machine has a user-selectable ring counter, set the
machine to answer incoming calls within 1 ring.
• If the machine is in Tel mode, disconnect or switch off the answering
machine with the fax machine. Otherwise, the outgoing message from
the answering machine will interrupt your phone conversation.
While you are talking over the telephone connected to the EXT socket, copy
and scan features are not available.
45
Receiving faxes using DRPD mode
Distinctive Ring is a telephone company service which enables an user to use a
single telephone line to answer several different telephone numbers. This
feature is often used by answering services who answer telephones for many
different clients and need to know which number someone is calling in on to
properly answer the phone.
4. Special Features
248
Fax features
1
Select
(fax) >
(Menu) > Fax Setup > Receiving > DRPD Mode
> Waiting Ring on the control panel.
46
Receiving in secure receiving mode
Or select Setup > Machine Setup > Next > Default Setting > Fax
Default > Common > Receive Mode > DRPD on the touch screen.
2
3
Call your fax number from another telephone.
When your machine begins to ring, do not answer the call. The machine
requires several rings to learn the pattern.
When the machine completes learning, the display shows Completed
DRPD Setup. If the DRPD setup fails, Error DRPD Ring appears.
4
This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
You may need to prevent your received faxes from being accessed by
unauthorized people. Turn on secure receiving mode, then all incoming faxes
go into memory. You can print the incoming faxes with entering the password.
Press OK when DRPD appears and start over from step 2.
To use the secure receiving mode, activate the menu from
(fax) >
(Menu) > Fax Feature > Secure Receive on the control panel.
• DRPD must be set up again if you re-assign your fax number, or connect
the machine to another telephone line.
Or select Setup > Machine Setup > Next > Fax Setup > Secure Receive on
the touch screen.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT socket.
Printing received faxes
1
Select
(fax) >
(Menu) > Fax Feature > Secure Receive > Print
on the control panel.
Or select Setup > Machine Setup > Next > Fax Setup > Secure Receive
> Print on the touch screen.
2
Enter a four-digit password and press OK.
4. Special Features
249
Fax features
3
•
The machine prints all of the faxes stored in memory.
Short Edge: Prints pages to be read by flipping like a note pad.
2
47
Printing faxes on both sides of the paper
3
5
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
3
4
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
Press OK.
Press
(Cancel or Stop/Clear) to return to ready mode.
48
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder.
2
Press
(fax) >
(Menu) > Fax Setup > Receiving > Duplex Print
on the control panel.
•
Off: Prints in Normal mode.
•
Long Edge: Prints pages to be read like a book.
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you are
making copies or printing. If you receive a fax while you are copying or printing,
your machine stores incoming faxes in its memory. Then, as soon as you finish
copying or printing, the machine automatically prints the fax.
If fax is received and being printed, other copy and print jobs cannot be
processed at the same time.
4. Special Features
250
Fax features
49
Printing sent fax report automatically
You can set the machine to print a report with detailed information about the
previous 50 communication operations, including time and dates.
1
Press
(fax) >
control panel.
2
Press
(Menu) > Fax Setup > Auto Report > On on the
(Cancel or Stop/Clear) to return to ready mode.
4. Special Features
251
Using shared folder features
This feature allows you to use the machine’s memory as a shared folder. The
advantage of this feature is that you can conveniently use the shared folder
through your computer’s window.
• This feature may not be available depending on model or optional goods
(see "Features by models" on page 7).
• You can use this feature in the models that have a mass storage device
(see "Variety feature" on page 10).
51
Using the shared folder
You can use the shared folder in the same way exactly like the normal computer.
Create, edit and delete the folder or file as a normal Windows folder. You also
store the scanned data in the shared folder. You can directly print files stored on
a the shared folder. You can print TIFF, BMP, JPEG and PRN files.
• The administrator can set the ID and password to restrict the user’ s
access and also set the maximum number of simultaneous users.
50
Creating a shared folder
1
2
Open the Windows Explore window from the computer.
3
Create a new folder under nfsroot directory.
Enter the printer’s \\[ip address] (example: \\169.254.133.42) in
the address field, and press the Enter key or click Go.
4. Special Features
252
Using memory/hard drive features
From the control panel
You can use this feature in the models that have a mass storage device
(HDD) or memory (see "Variety feature" on page 10).
If your machine has optional memory or an optional hard drive, you can use
these features from the
(Menu) button> System Setup > Job
Management.
52
Setting up the optional memory
From the printer driver
•
Active Job: All of the print jobs waiting to be printed are listed in the active
job queue in the order you sent them to the printer. You can delete a job
from the queue before printing, or promote a job to print sooner.
•
File Policy: You can choose the file policy for generating file name before
you proceed with the job through optional memory. If the optional memory
already has the same name when you entered a new file name, you can
rename or overwrite it.
•
Stored Job: You can print or delete a stored job.
After installing the optional memory, you can use advanced printing features,
such as proofing a job and specifying of printing a private job in the Print
window. Select Properties or Preference, and configure the printing mode.
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• After installing the hard drive, you can also print the predefined
document templates from the
Form Menu.
(Menu) button > System Setup >
4. Special Features
253
5. Useful Management
Tools
This chapter introduces management tools provided to help you make full use of your machine.
• Easy Capture Manager
255
• Samsung AnyWeb Print
256
• Easy Eco Driver
257
• Using SyncThru™ Web Service
258
• Using Samsung Easy Printer Manager
261
• Using Samsung Printer Status
264
• Using Smart Panel
266
• Using the Linux Unified Driver Configurator
268
Easy Capture Manager
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows OS users only (see "Software" on page 7).
Capture your screen and launch Easy Capture Manager by simply pressing the Print Screen key. Now you can easily print your captured screen as captured or edited.
5. Useful Management Tools
255
Samsung AnyWeb Print
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows and Macintosh OS users only (see "Software" on page 7).
This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. Click Start > All
programs > Samsung Printers > Samsung AnyWeb Print > Download the latest version to link to the website where the tool is available for download.
5. Useful Management Tools
256
Easy Eco Driver
• This feature may not be available depending on model or optional goods (see "Software" on page 7).
• Available for Windows OS users only (see "Software" on page 7).
With the Easy Eco Driver, you can apply Eco features to save paper and toner before printing. To use this application, Start Easy Eco Driver before printing job
checkbox in the printer properties should be checked.
Easy Eco Driver also allows you simple editing such as removing images and texts, changing fonts, and more. You can save frequently used settings as a preset.
How to use:
1 Open a document to print.
2 Print the document.
A preview window appears.
3 Select the options you want to apply to the document.
You can see the preview of the applied features.
4 Click Print.
5. Useful Management Tools
257
Using SyncThru™ Web Service
1
2
• Internet Explorer 6.0 or higher is the minimum requirement for
SyncThru™ Web Service.
• SyncThru™ Web Service explanation in this user’s guide may differ from
your machine depending on its options or models.
• Network model only (see "Software" on page 7).
Click Login on the upper right of the SyncThru™ Web Service website.
Type in the ID and Password then click Login.
•
ID: admin
•
Password: sec00000
2
SyncThru™ Web Service overview
1
Accessing SyncThru™ Web Service
1
Access a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in
the address field and press the Enter key or click Go.
2
Some tabs may not appear depending on your model.
Your machine’s embedded website opens.
Logging into SyncThru™ Web Service
Before configuring options in SyncThru™ Web Service, you need to log-in as an
administrator. You can still use SyncThru™ Web Service without logging in but
you won’t have access to Settings tab and Security tab.
Information tab
This tab gives you general information about your machine. You can check
things, such as remaining amount of toner. You can also print reports, such as an
error report.
•
Active Alerts: Shows the alerts that have occurred in the machine and their
severity.
•
Supplies: Shows how many pages are printed and amount of toner left in
the cartridge.
5. Useful Management Tools
258
Using SyncThru™ Web Service
•
Usage Counters: Shows the usage count by print types: simplex and
duplex.
•
Current Settings: Shows the machine’s and network’s information.
•
Print information: Prints reports such as system related reports, e-mail
address, and font reports.
•
User Access Control: Classifies users into several groups according to each
user’s role. Each user’s authorization, authentication and accounting will be
controlled by the group’s role definition.
Maintenance tab
Settings tab
This tab allows you to maintain your machine by upgrading firmware and
setting contact information for sending emails. You can also connect to
Samsung website or download drivers by selecting the Link menu.
This tab allows you to set configurations provided by your machine and
network. You need to log-in as an administrator to view this tab.
•
Firmware Upgrade: Upgrade your machine’s firmware.
•
Contact Information: Shows the contact information.
•
Link: Shows links to useful sites where you can download or check
information.
•
Machine Settings tab: Sets options provided by your machine.
•
Network Settings tab: Shows options for the network environment. Sets
options such as TCP/IP and network protocols.
3
Security tab
This tab allows you to set system and network security information. You need to
log-in as an administrator to view this tab.
•
System Security: Sets the system administrator’s information and also
enables or disables machine features.
•
Network Security: Sets settings for HTTPs, IPSec, IPv4/IPv6 filtering, 802.1x,
and Authentication servers.
E-mail notification setup
You can receive emails about your machine’s status by setting this option. By
setting information such as IP address, host name, e-mail address and SMTP
server information, the machine status (toner cartridge shortage or machine
error) will be sent to a certain person's e-mail automatically. This option may be
used more frequently by a machine administrator.
5. Useful Management Tools
259
Using SyncThru™ Web Service
1
Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field
and press the Enter key or click Go.
4
Setting the system administrator’s information
This setting is necessary for using the e-mail notification option.
2
3
Your machine’s embedded website opens.
From the Settings tab, select Machine Settings > E-mail Notification.
Select Enable check box to use the E-mail Notification.
2
3
4
Your machine’s embedded website opens.
5
Click Apply.
Click Add button to add e-mail notification user.
Set the recipient name and e-mail address(es) with notification items
you want to receive an alert for.
6
Start a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field
and press the Enter key or click Go.
If you have not configured outgoing server environment, go to Settings >
Network Settings > Outgoing Mail Server(SMTP) to configure network
environment before setting e-mail notification.
4
5
1
From the Security tab, select System Security > System Administrator
Enter the name of the administrator, phone number, location, and email
address.
Click Apply.
If the firewall is activated, the e-mail may not be sent successfully. In that
case, contact the a network administrator.
5. Useful Management Tools
260
Using Samsung Easy Printer Manager
• This feature may not be available depending on model or optional goods
(see "Software" on page 7).
• Available for Windows and Macintosh OS users only (see "Software" on
page 7).
Open the Applications folder > Samsung folder > Samsung Easy Printer
Manager.
The Samsung Easy Printer Manager interface is comprised of various basic
sections as described in the table that follows:
• For Windows, Internet Explorer 6.0 or higher is the minimum
requirement for Samsung Easy Printer Manager.
The screenshot may differ depending on operating system you are using.
Samsung Easy Printer Manager is an application that combines Samsung
machine settings into one location. Samsung Easy Printer Manager combines
device settings as well as printing environments, settings/actions and
launching. All of these features provide a gateway to conveniently use your
Samsung machine. Samsung Easy Printer Manager provides two different user
interfaces for the user to choose from: the basic user interface and the advanced
user interface. Switching between the two interfaces is easy: just click a button.
5
Understanding Samsung Easy Printer Manager
To open the program:
For Windows,
Select Start > Programs or All Programs > Samsung Printers > Samsung
Easy Printer Manager > Samsung Easy Printer Manager.
For Macintosh,
Printer list
1
The Printer List displays printers installed on your
computer and network printers added by network
discovery (Windows only).
5. Useful Management Tools
261
Using Samsung Easy Printer Manager
Printer
information
2
Quick links
This area gives you general information about your
machine. You can check information, such as the machine’s
model name, IP address (or Port name), and machine
status.
4
If you connect your machine to a network, the
SyncThru™ Web Service icon is enabled.
You can view the online User’s Guide.
Troubleshooting button: This button opens the
Troubleshooting Guide when an error occurs.
You can directly open the necessary section in the
user’s guide.
Application
information
3
Displays Quick links to machine specific functions. This
section also includes links to applications in the advanced
settings.
Contents area
Displays information about the selected machine,
remaining toner level, and paper. The information will vary
based on the machine selected. Some machines do not
have this feature.
Order supplies
Click on the Order button from the supply ordering
window. You can order replacement toner cartridge(s)
from online.
5
Includes links for changing to the advanced settings,
preference, help, and about.
6
The
button is used to change the user
interface to the advanced settings user interface
(see "Advanced settings user interface overview"
on page 262).
Select the Help menu or click the
button from the window and click on
any option you want to know about.
6
Advanced settings user interface overview
The advanced user interface is intended to be used by the person responsible
for managing the network and machines.
5. Useful Management Tools
262
Using Samsung Easy Printer Manager
Fax to PC Settings
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Device Settings
This menu includes settings related to the basic fax functionality of the selected
device.
•
Disable: If Disable is On, incoming faxes will not be received on this device.
•
Enable Fax Receiving from Device: Enables faxing on the device and allow
more options to be set.
You can configure various machine settings such as machine setup, paper,
layout, emulation, network, and print information.
Alert Settings (Windows only)
Scan to PC Settings
This menu includes settings related to error alerting.
This menu includes settings to create or delete scan to PC profiles.
•
Printer Alert: Provides settings related to when alerts will be received.
•
•
Email Alert: Provides options relating to receiving alerts via email.
•
Alert History: Provides a history of device and toner related alerts.
Scan Activation: Determines whether or not scanning is enabled on the
device.
•
Profile: Displays the scanning profiles saved on the selected device.
•
Basic tab: Contains settings related general scan and device settings.
•
Image tab: Contains settings related to image altering.
Job Accounting
Provides querying of quota information of the specified job accounting user.
This quota information can be created and applied to devices by job accounting
software such as SyncThru™ or CounThru™ admin software.
5. Useful Management Tools
263
Using Samsung Printer Status
The Samsung Printer Status is a program that monitors and informs you of the
machine status.
Icon
• The Samsung Printer Status window and its contents shown in this user’s
guide may differ depending on the machine or operating system in use.
Mean
Normal
The machine is in ready mode and experiencing no
errors or warnings.
Warning
The machine is in a state where an error might occur in
the future. For example, it might be in toner low status,
which may lead to toner empty status.
Error
The machine has at least one error.
• Check the operating system(s) that are compatible with your machine
(see "Specifications" on page 103).
• Available for Windows OS users only (see "Software" on page 7).
Description
7
Samsung Printer Status overview
If an error occurs while operating, you can check the error from the Samsung
Printer Status. Samsung Printer Status is installed automatically when you install
the machine software.
You can also launch Samsung Printer Status manually. Go to the Printing
Preferences, click the Basic tab > Printer Status button.
These icons appear on the Windows task bar:
Toner Level
You can view the level of toner remaining in each
toner cartridge. The machine and the number of
toner cartridge(s) shown in the above window may
differ depending on the machine in use. Some
machines do not have this feature.
Option
You can set printing job alert related settings.
1
2
5. Useful Management Tools
264
Using Samsung Printer Status
3
Order Supplies
You can order replacement toner cartridge(s) from
online.
User’s Guide
You can view the online User’s Guide.
This button opens the Troubleshooting
Guide when an error occurs. You can directly
open the troubleshooting section in the
user’s guide.
4
5
Close
Close the window.
5. Useful Management Tools
265
Using Smart Panel
Smart Panel is a program that monitors and informs you of the machine’s status,
and allows you to customize the machine’s settings. You can download Smart
Panel from the Samsung website (see "Installing the Smart Panel" on page 133).
Toner Level
You can view the level of toner remaining in each toner
cartridge. The machine and the number of toner
cartridge(s) shown in the above window may differ
depending on the machine in use. If you cannot see
this feature, it is not applicable to your machine.
Buy Now
You can order replacement toner cartridge(s) from
online.
User’s Guide
You can view the online User’s Guide.
1
• The Smart Panel window and its contents shown in this user’s guide may
differ depending on the machine or operating system in use.
• Check the operating system(s) that are compatible with your machine
(see "Specifications" on page 103).
2
• Available for Linux OS users only (see "Software" on page 7).
This button opens the Troubleshooting
Guide when an error occurs. You can directly
open the troubleshooting section in the user’s
guide.
3
8
Smart Panel overview
If an error occurs while operating, you can check the error from the Smart Panel.
You can also launch Smart Panel manually.
Double-click the Smart Panel icon(
Printer Setting
) in the Notification Area.
You can configure various machine settings in the
Printer Settings Utility window. Some machines do not
have this feature.
4
2
3
If you connect your machine to a network, the
SyncThru™ Web Service window appears
instead of the Printer Settings Utility.
4
1
5. Useful Management Tools
266
Using Smart Panel
9
Changing Smart Panel’s settings
Right-click in Linux on the Smart Panel icon and select Configure smart panel.
Select the settings you want from the Configure smart panel window.
5. Useful Management Tools
267
Using the Linux Unified Driver Configurator
The Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified Driver
Configurator (see "Installation for Linux" on page 133).
After the driver is installed on your Linux system, the Unified Driver Configurator
icon will automatically be created on your desktop.
10
Opening Unified Driver Configurator
1
Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2
Click each button on the left to switch to the corresponding
configuration window.
1 Printer Configuration
2 Port Configuration
5. Useful Management Tools
268
Using the Linux Unified Driver Configurator
Printers tab
To use the on screen help, the Help or
3
button from the window.
After changing the configurations, click Exit to close the Unified Driver
Configurator.
View the current system’s printer configuration by clicking on the machine icon
button on the left side of the Unified Driver Configurator window.
11
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
1
Switches to Printers configuration.
2
Shows all of the installed machines.
3
Shows the status, model name, and URI of your machine.
5. Useful Management Tools
269
Using the Linux Unified Driver Configurator
The printer control buttons are, as follows:
•
Refresh: Renews the available machines list.
•
Add Printer: Allows you to add a new machines.
•
Remove Printer: Removes the selected machine.
•
Set as Default: Sets the current selected machine as a default machine.
•
Stop/Start: Stops/starts the machine.
•
Test: Allows you to print a test page to ensure the machine is working
properly.
•
Properties: Allows you to view and change the printer’s properties.
Classes tab
The Classes tab shows a list of available machine classes.
1
Shows all of the machine classes.
2
Shows the status of the class and the number of machines
in the class.
•
Refresh: Renews the classes list.
•
Add Class: Allows you to add a new machine class.
•
Remove Class: Removes the selected machine class.
5. Useful Management Tools
270
Using the Linux Unified Driver Configurator
12
Ports configuration
In this window, you can view the list of available ports, check the status of each
port and release a port that is stalled in a busy state when its owner has
terminated the job for any reason.
1
Switches to Ports configuration.
2
Shows all of the available ports.
3
Shows the port type, device connected to the port, and
status.
•
Refresh: Renews the available ports list.
•
Release port: Releases the selected port.
5. Useful Management Tools
271
6. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Paper feeding problems
273
• Power and cable connecting problems
274
• Printing problems
275
• Printing quality problems
279
• Copying problems
287
• Scanning problems
288
• Faxing problems
290
• Operating system problems
292
Paper feeding problems
Condition
Suggested solutions
Paper jams during printing.
Clear the paper jam.
Paper sticks together.
• Check the maximum paper capacity of the tray.
• Make sure that you are using the correct type of paper.
• Remove paper from the tray and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
Multiple sheets of paper do not feed.
Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
Paper does not feed into the machine.
• Remove any obstructions from inside the machine.
• Paper has not been loaded correctly. Remove paper from the tray and reload it correctly.
• There is too much paper in the tray. Remove excess paper from the tray.
• The paper is too thick. Use only paper that meets the specifications required by the machine.
The paper keeps jamming.
• There is too much paper in the tray. Remove excess paper from the tray. If you are printing on special materials, use the
manual feeding in tray.
• An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine.
• There may be debris inside the machine. Open the front cover and remove any debris.
Transparencies stick together in the paper
exit.
Use only transparencies specifically designed for laser printers. Remove each transparency as it exits from the machine.
Envelopes skew or fail to feed correctly.
Ensure that the paper guides are against both sides of the envelopes.
6. Troubleshooting
273
Power and cable connecting problems
Click this link to open an animation about solving power problems.
Condition
The machine is not receiving power,
or the connection cable between the
computer and the machine is not
connected properly.
Suggested solutions
• Connect the machine to the electricity supply first. If the machine has a
(Power) button on the control, press it.
• Disconnect the machine’s cable and reconnect it.
6. Troubleshooting
274
Printing problems
Condition
The machine does not
print.
Possible cause
The machine is not receiving power.
Suggested solutions
Connect the machine to the electricity supply first. If the machine has a
(Power)
button on the control, press it.
The machine is not selected as the default
machine.
Select your machine as your default machine in Windows.
Check the machine for the following:
• The cover is not closed. Close the cover.
• Paper is jammed. Clear the paper jam (see "Clearing paper jams" on page 91).
• No paper is loaded. Load paper (see "Loading paper in the tray" on page 43).
• The toner cartridge is not installed. Install the toner cartridge (see "Replacing the toner cartridge" on page 75).
• Make sure the protect cover and sheets are removed from the toner cartridge (see "Replacing the toner cartridge" on page 75).
If a system error occurs, contact your service representative.
The connection cable between the computer and
the machine is not connected properly.
Disconnect the machine cable and reconnect it (see "Rear view" on page 23).
The connection cable between the computer and
the machine is defective.
If possible, attach the cable to another computer that is working properly and print a job.
You can also try using a different machine cable.
The port setting is incorrect.
Check the Windows printer settings to make sure that the print job is sent to the correct
port. If the computer has more than one port, make sure that the machine is attached to
the correct one.
6. Troubleshooting
275
Printing problems
Condition
The machine does not
print.
Possible cause
Suggested solutions
The machine may be configured incorrectly.
Check the Printing Preferences to ensure that all of the print settings are correct.
The printer driver may be incorrectly installed.
Uninstall and reinstall the machine’s driver.
The machine is malfunctioning.
Check the display message on the control panel to see if the machine is indicating a
system error. Contact a service representative.
The document size is so big that the hard disk
space of the computer is insufficient to access the
print job.
Get more hard disk space and print the document again.
The output tray is full.
Once the paper is removed from the output tray, the machine resumes printing.
The machine selects print
materials from the wrong
paper source.
The paper option that was selected in the
Printing Preferences may be incorrect.
For many software applications, the paper source selection is found under the Paper tab
within the Printing Preferences (see "Opening printing preferences" on page 57).
Select the correct paper source. See the printer driver help screen (see "Using help" on
page 58).
A print job is extremely
slow.
The job may be very complex.
Reduce the complexity of the page or try adjusting the print quality settings.
Half the page is blank.
The page orientation setting may be incorrect.
Change the page orientation in your application (see "Opening printing preferences" on
page 57). See the printer driver help screen (see "Using help" on page 58).
The paper size and the paper size settings do not
match.
Ensure that the paper size in the printer driver settings matches the paper in the tray.
The machine cable is loose or defective.
Disconnect the machine cable and reconnect. Try a print job that you have already
printed successfully. If possible, attach the cable and the machine to another computer
that you know works and try a print job. Finally, try a new machine cable.
The machine prints, but
the text is wrong,
garbled, or incomplete.
Or, ensure that the paper size in the printer driver settings matches the paper selection
in the software application settings you use (see "Opening printing preferences" on
page 57).
6. Troubleshooting
276
Printing problems
Condition
Pages print, but they are
blank.
Possible cause
Suggested solutions
The wrong printer driver was selected.
Check the application’s printer selection menu to ensure that your machine is selected.
The software application is malfunctioning.
Try printing a job from another application.
The operating system is malfunctioning.
Exit Windows and reboot the computer. Turn the machine off and back on again.
The toner cartridge is defective or out of toner.
Redistribute the toner, if necessary.
If necessary, replace the toner cartridge.
• See "Redistributing toner" on page 74.
• See "Replacing the toner cartridge" on page 75.
The file may have blank pages.
Check the file to ensure that it does not contain blank pages.
Some parts, such as the controller or the board,
may be defective.
Contact a service representative.
The machine does not
print PDF files correctly.
Some parts of graphics,
text, or illustrations are
missing.
Incompatibility between the PDF file and the
Acrobat products.
Printing the PDF file as an image may enable the file to print. Turn on Print As Image
from the Acrobat printing options.
The print quality of
photos is not good.
Images are not clear.
The resolution of the photo is very low.
Reduce the photo size. If you increase the photo size in the software application, the
resolution will be reduced.
Before printing, the
machine emits vapor near
the output tray.
Using damp paper can cause vapor during
printing.
This is not a problem. Just keep printing.
It will take longer to print when you print a PDF file as an image.
6. Troubleshooting
277
Printing problems
Condition
Possible cause
Suggested solutions
The machine does not
print special-sized paper,
such as billing paper.
Paper size and paper size setting do not match.
Set the correct paper size in the Custom in Paper tab in Printing Preferences (see
"Opening printing preferences" on page 57).
The printed billing paper
is curled.
The paper type setting does not match.
Change the printer option and try again. Go to Printing Preferences, click Paper tab,
and set type to Thick (see "Opening printing preferences" on page 57).
6. Troubleshooting
278
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly, there
might be a reduction in print quality. See the table below to clear the problem.
Condition
Light or faded print
Suggested solutions
• If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge (see "Replacing the
toner cartridge" on page 75).
• The paper may not meet paper specifications; for example, the paper may be too moist or rough.
• If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and turn
the toner save mode off. See the help screen of the printer driver.
• A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. Clean the inside of your machine
(see "Cleaning the machine" on page 79).
• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page
79). If these steps do not correct the problem, contact a service representative.
The top half of the paper is
printed lighter than the rest of
the paper
The toner might not adhere properly to this type of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
"Opening printing preferences" on page 57).
6. Troubleshooting
279
Printing quality problems
Condition
Toner specks
Suggested solutions
• The paper may not meet specifications; for example, the paper may be too moist or rough.
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 79).
A aB bC c
A aB bC c
A aB bC c
A aB bC c
A aB bC c
Dropouts
• The paper path may need cleaning. Contact a service representative (see "Cleaning the machine" on page 79).
If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective. Try reprinting the job.
A aBb C
A aBb C
A aBb C
A aBb C
A aBb C
• The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper.
• The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thick (see "Opening
printing preferences" on page 57).
If these steps do not correct the problem, contact a service representative.
White Spots
If white spots appear on the page:
• The paper is too rough and a lot of dirt from paper falls to the inner components within the machine, so the transfer roller may be
dirty. Clean the inside of your machine (see "Cleaning the machine" on page 79).
• The paper path may need cleaning. Clean the inside of your machine (see "Cleaning the machine" on page 79).
If these steps do not correct the problem, contact a service representative.
6. Troubleshooting
280
Printing quality problems
Condition
Vertical lines
Suggested solutions
If black vertical streaks appear on the page:
• The surface (drum part) of the toner cartridge inside the machine has probably been scratched. Remove the toner cartridge and
install a new one (see "Replacing the toner cartridge" on page 75).
If white vertical streaks appear on the page:
• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page
79). If these steps do not correct the problem, contact a service representative.
Black or color background
If the amount of background shading becomes unacceptable:
• Change to a lighter weight paper.
• Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount
of background shading.
• Remove the old toner cartridge and install a new one (see "Replacing the toner cartridge" on page 75).
• Thoroughly redistribute the toner (see "Redistributing toner" on page 74).
Toner smear
• Clean the inside of the machine (see "Cleaning the machine" on page 79).
• Check the paper type and quality.
• Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on page 75).
6. Troubleshooting
281
Printing quality problems
Condition
Vertical repetitive defects
Suggested solutions
If marks repeatedly appear on the printed side of the page at even intervals:
• The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one (see
"Replacing the toner cartridge" on page 75).
• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after
a few more pages.
• The fusing assembly may be damaged. Contact a service representative.
Background scatter
A
Background scatter results from bits of toner randomly distributed on the printed page.
• The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that
the paper does not absorb too much moisture.
• If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams
on the reverse side. Printing on seams can cause problems.
Or select Thick from the Printing Preferences window (see "Opening printing preferences" on page 57).
• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application
or in Printing Preferences (see "Opening printing preferences" on page 57). Ensure the correct paper type is selected. For example:
If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.
• If you are using a new toner cartridge, redistribute the toner first (see "Redistributing toner" on page 74).
Toner particles are around bold
characters or pictures
The toner might not adhere properly to this type of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
"Opening printing preferences" on page 57).
• Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging
can occur causing this copy quality problem.
6. Troubleshooting
282
Printing quality problems
Condition
Suggested solutions
Misformed characters
• If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try different paper.
Page skew
• Ensure that the paper is loaded properly.
A aBb
A aBb C
A aBb C
A aBb C
A aBb C
Cc
Curl or wave
• Check the paper type and quality.
• Ensure that the guides are not too tight or too loose against the paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperature and humidity can cause paper curl.
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
6. Troubleshooting
283
Printing quality problems
Condition
Wrinkles or creases
Suggested solutions
• Ensure that the paper is loaded properly.
• Check the paper type and quality.
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Back of printouts are dirty
• Check for leaking toner. Clean the inside of the machine (see "Cleaning the machine" on page 79).
Solid color or black pages
• The toner cartridge may not be installed properly. Remove the cartridge and reinsert it.
A
• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on
page 75).
• The machine may require repairing. Contact a service representative.
6. Troubleshooting
284
Printing quality problems
Condition
Loose toner
Suggested solutions
• Clean the inside of the machine (see "Cleaning the machine" on page 79).
• Check the paper type and quality.
• Remove the toner cartridge and then, install a new one (see "Replacing the toner cartridge" on page 75).
If the problem persists, the machine may require repair. Contact a service representative.
Character voids
A
Horizontal stripes
Character voids are white areas within parts of characters that should be solid black:
• If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character
voids are normal.
• You may be printing on the wrong surface of the paper. Remove the paper and turn it around.
• The paper may not meet paper specifications.
If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective. Remove the toner cartridge and install a new one (see "Replacing the toner cartridge" on
page 75).
If the problem persists, the machine may require repairing. Contact a service representative.
6. Troubleshooting
285
Printing quality problems
Condition
Curl
Suggested solutions
If the printed paper is curled or paper does not feed into the machine:
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
• Change the printer’s paper option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thin (see
"Opening printing preferences" on page 57).
• An unknown image
repetitively appears on a few
sheets
Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above.
The high altitude may affect the print quality, such as loose toner or light imaging. Change the altitude setting for your machine (see
"Altitude adjustment" on page 207).
• Loose toner
• Light print or contamination
occurs
6. Troubleshooting
286
Copying problems
Condition
Suggested solutions
Copies are too light or too dark. Adjust the darkness in copy feature to lighten or darken the backgrounds of copies (see "Changing the settings for each copy" on page
61).
If the defect still appears after
cleaning the machine.
set the Copy Feature > Adjust Background > Auto. (see "Menu overview" on page 31).
Smears, lines, marks, or spots
appear on copies.
• If the defects are on the original, adjust darkness in copy feature to lighten the background of your copies.
Copy image is skewed.
• Ensure that the original is aligned with the registration guide.
• If there are no defects on the original, clean the scan unit (see "Cleaning the scan unit" on page 83).
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 79).
Blank copies print out.
Ensure that the original is face down on the scanner glass or face up in the document feeder.
If these steps do not correct the problem, contact a service representative.
Image rubs off the copy easily.
• Replace the paper in the tray with paper from a new package.
• In high humidity areas, do not leave paper in the machine for extended periods of time.
Frequent copy paper jams
occur.
• Fan the paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if
necessary.
• Ensure that the paper is the proper type and weight (see "Print media specifications" on page 105).
• Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared.
Toner cartridge produces fewer
copies than expected before
running out of toner.
• Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other
documents that use more toner.
• The scanner lid may be left open while copies are being made.
• Turn the machine off and back on.
6. Troubleshooting
287
Scanning problems
Condition
The scanner does not work.
Suggested solutions
• Make sure that you place the original to be scanned face down on the scanner glass, or face up in the document feeder (see
"Loading originals" on page 52).
• There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works.
Try lowering the scan resolution rate.
• Check that the machine printer cable is connected properly.
• Make sure that the machine printer cable is not defective. Switch the printer cable with a known good cable. If necessary, replace
the printer cable.
• Check that the scanner is configured correctly. Check scan setting in the SmarThru Office or the application you want to use to make
certain that the scanner job is being sent to the correct port (for example, USB001).
The unit scans very slowly.
• Check if the machine is printing received data. If so, scan the document after the received data has been printed.
• Graphics are scanned more slowly than text.
• Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned
image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how
to set BIOS, refer to your computer user’s guide.
6. Troubleshooting
288
Scanning problems
Condition
Message appears on your
computer screen:
Suggested solutions
• There may be a copying or printing job in progress. Try your job again when that job is finished.
• The selected port is currently being used. Restart your computer and try again.
• Device can’t be set to the H/W
mode you want.
• The machine printer cable may be improperly connected or the power may be off.
• Port is being used by another
program.
• Ensure that the machine is properly connected and the power is on, then restart your computer.
• Port is disabled.
• The scanner driver is not installed or the operating environment is not set up properly.
• The USB cable may be improperly connected or the power may be off.
• Scanner is busy receiving or
printing data. When the
current job is completed, try
again.
• Invalid handle.
• Scanning has failed.
6. Troubleshooting
289
Faxing problems
Condition
Suggested solutions
The machine is not working,
there is no display, or the
buttons are not working.
• Unplug the power cord and plug it in again.
No dial tone.
• Check that the phone line is properly connected (see "Rear view" on page 23).
• Ensure that there is power being supplied to the electrical outlet.
• Ensure that the power is turned on.
• Check that the phone socket on the wall is working by plugging in another phone.
The numbers stored in memory
do not dial correctly.
Make sure that the numbers are stored in memory correctly. To check that, print an address book list.
The original does not feed into
the machine.
• Make sure that the paper is not wrinkled and you are inserting it in correctly. Check that the original is the right size, not too thick
or thin.
• Make sure that the document feeder is firmly closed.
• The document feeder rubber pad may need to be replaced. Contact a service representative (see "Available maintenance parts" on
page 73).
Faxes are not received
automatically.
• The receiving mode should be set to fax (see "Changing the receive modes" on page 247).
• Make sure that there is paper in the tray (see "Print media specifications" on page 105).
• Check to see if the display shows any error message. If it does, clear the problem.
The machine does not send.
• Make sure that the original is loaded in the document feeder or on the scanner glass.
• Check the fax machine you are sending to, to see if it can receive your fax.
The incoming fax has blank
spaces or is of poor-quality.
• The fax machine sending you the fax may be faulty.
• A noisy phone line can cause line errors.
• Check your machine by making a copy.
• A toner cartridge has almost reached its estimated cartridge life. Replace the toner cartridge (see "Replacing the toner cartridge"
on page 75).
6. Troubleshooting
290
Faxing problems
Condition
Suggested solutions
Some of the words on an
incoming fax are stretched.
The fax machine sending the fax had a temporary document jam.
There are lines on the originals
you sent.
Check your scan unit for marks and clean it (see "Cleaning the scan unit" on page 83).
The machine dials a number,
but the connection with the
other fax machine fails.
The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and
ask them to solve the problem on their side.
Faxes do not store in memory.
There may not be enough memory space to store the fax. If the display indicating the memory status shows, delete any faxes you no
longer need from the memory, and then try to store the fax again. Call for service.
Blank areas appear at the
bottom of each page or on
other pages, with a small strip
of text at the top.
You may have chosen the wrong paper settings in the user option setting. Check the paper size and type again.
6. Troubleshooting
291
Operating system problems
1
Common Windows problems
Condition
Suggested solutions
“File in Use” message appears
during installation.
Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall the printer driver.
“General Protection Fault”,
“Exception OE”, “Spool 32”, or
“Illegal Operation” messages
appear.
Close all other applications, reboot Windows and try printing again.
“Fail To Print”, “A printer
timeout error occurred”
message appear.
These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in ready
mode or after printing has completed, check the connection and/or whether an error has occurred.
Refer to the Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages.
6. Troubleshooting
292
Operating system problems
2
Common Macintosh problems
Condition
The machine does not print PDF files
correctly. Some parts of graphics, text, or
illustrations are missing.
Suggested solutions
Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options.
It will take longer to print when you print a PDF file as an image.
Some letters are not displayed normally
during cover page printing.
Mac OS cannot create the font while printing the cover page. The English alphabet and numbers are displayed normally on
the cover page.
When printing a document in Macintosh
with Acrobat Reader 6.0 or higher, colors
print incorrectly.
Make sure that the resolution setting in your machine driver matches the one in Acrobat Reader.
Refer to the Macintosh User’s Guide that came with your computer for further information on Macintosh error messages.
6. Troubleshooting
293
Operating system problems
3
Common Linux problems
Condition
The machine does not print.
Suggested solutions
• Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in the
Printers configuration window to look at the list of available machines. Make sure that your machine is displayed on the list. If
not, open Add new printer wizard to set up your device.
• Check if the machine is started. Open Printers configuration and select your machine from the printers list. Look at the
description in the Selected printer pane. If its status contains Stopped, press the Start button. Normal operation of the machine
should be restored. The “stopped” status might be activated when some problems in printing occur.
• Check if your application has special print options such as “-oraw”. If “-oraw” is specified in the command line parameter, then
remove it to print properly. For Gimp front-end, select “print” -> “Setup printer” and edit the command line parameter in the
command item.
Some color images come out all
black.
This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color
space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you should
upgrade Ghostscript on your system to at least GNU Ghostscript version 7.06 or later. You can find recent Ghostscript versions at
www.ghostscript.com.
Some color images come out in
unexpected color.
This is a known bug in Ghostscript (until GNU Ghostscript version 7.xx) when the base color space of the document is indexed RGB
color space and it is converted through CIE color space. Because Postscript uses CIE color space for Color Matching System, you
should upgrade Ghostscript on your system to at least GNU Ghostscript version 8.xx or later. You can find recent Ghostscript versions
at www.ghostscript.com.
The machine does not print
whole pages, and output is
printed on half the page.
It is a known problem that occurs when a color machine is used on version 8.51 or earlier of Ghostscript, 64-bit Linux OS, and has been
reported to bugs.ghostscript.com as Ghostscript Bug 688252.The problem is solved in AFPL Ghostscript v. 8.52 or above. Download
the latest version of AFPL Ghostscript from http://sourceforge.net/projects/ghostscript/ and install it to solve this problem.
6. Troubleshooting
294
Operating system problems
Condition
I cannot scan via Gimp Frontend.
Suggested solutions
Check if Gimp Front-end has Xsane:Device dialog. on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detailed information,
refer to the Help for Linux distribution CD or Gimp Front-end application.
If you wish to use another kind of scan application, refer to application’s Help.
“Cannot open port device file”
error message appears when
printing a document.
Avoid changing print job parameters (e.q., via LPR GUI) while a print job is in progress. Known versions of CUPS server break the print
job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks the port
while printing, the abrupt termination of the driver keeps the port locked and unavailable for subsequent print jobs. If this situation
occurs, try to release the port by selecting Release port in the Port configuration window.
The machine does not appear
on the scanners list.
• Ensure your machine is attached to your computer, connected properly via the USB port, and is turned on.
• Ensure the scanner driver for your machine is installed in your system. Open Unified Linux Driver configurator, switch to Scanners
configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the
window.
• Ensure the port is not busy. Since functional components of machine (printer and scanner) share the same I/O interface (port), the
situation of simultaneous access of different user applications to the same port is possible. To avoid possible conflicts, only one of
them at a time is allowed to gain control over the device. The other user will encounter “device busy” response. This usually
happens when starting a scan procedure. An appropriate message box appears.
To identify the source of the problem, open the Ports configuration and select the port assigned to your scanner, port's symbol /
dev/mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1, and so on. USB ports start
at /dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane, you can
see if the port is occupied by another application. If this is the case, you should either wait for completion of the current job or
press the Release port button, if you are sure that the present port application is not functioning properly.
The machine does not scan.
• Ensure a document is loaded into the machine, ensure your machine is connected to the computer.
• If there is an I/O error while scanning.
6. Troubleshooting
295
Operating system problems
Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages.
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
The PostScript file cannot be
printed
Possible cause
The PostScript driver may not be installed
correctly.
Solution
• Install the PostScript driver (see "Software Installation" on page 130).
• Print a configuration page and verify that the PS version is available for
printing.
• If the problem persists, contact a service representative.
Limit Check Error report prints
The print job was too complex.
You might need to reduce the complexity of the page or install more memory.
A PostScript error page prints
The print job may not be PostScript.
Make sure that the print job is a PostScript job. Check to see whether the software
application expected a setup or PostScript header file to be sent to the machine.
The optional tray is not
selected in the driver
The printer driver has not been configured to
recognize the optional tray.
Open the PostScript driver properties, select the Device Options tab, and set the
tray option.
When printing a document in
Macintosh with Acrobat Reader
6.0 or higher, colors print
incorrectly
The resolution setting in the printer driver may
not be matched with the one in Acrobat Reader.
Make sure that the resolution setting in your printer driver matches the one in
Acrobat Reader.
6. Troubleshooting
296
Contact SAMSUNG worldwide
If you have any comments or questions regarding Samsung products, contact
the Samsung customer care center.
Country/Region
Customer Care Center
Web Site
ALBANIA
42 27 5755
ARGENTINE
0800-333-3733
ARMENIA
0-800-05-555
AUSTRALIA
1300 362 603
www.samsung.com
AUSTRIA
0810-SAMSUNG (7267864, €
0.07/min)
www.samsung.com
AZERBAIJAN
088-55-55-555
BAHRAIN
8000-4726
BELARUS
810-800-500-55-500
02-201-24-18
BELGIUM
BOSNIA
BRAZIL
www.samsung.com
www.samsung.com
www.samsung.com/be
(Dutch)
www.samsung.com/
be_fr (French)
05 133 1999
0800-124-421
www.samsung.com
4004-0000
BULGARIA
07001 33 11
www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
www.samsung.com
Country/Region
Customer Care Center
Web Site
CHILE
800-SAMSUNG (726-7864)
www.samsung.com
CHINA
400-810-5858
www.samsung.com
COLOMBIA
01-8000112112
www.samsung.com
COSTA RICA
0-800-507-7267
www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
www.samsung.com
800-SAMSUNG (800-726786)
www.samsung.com
CZECH REPUBLIC
Samsung Zrt., česká organizační složka, Oasis Florenc,
Sokolovská394/17, 180 00, Praha 8
DENMARK
70 70 19 70
www.samsung.com
DOMINICA
1-800-751-2676
www.samsung.com
ECUADOR
1-800-10-7267
www.samsung.com
EGYPT
0800-726786
www.samsung.com
EIRE
0818 717100
www.samsung.com
EL SALVADOR
800-6225
www.samsung.com
ESTONIA
800-7267
www.samsung.com
FINLAND
030-6227 515
www.samsung.com
FRANCE
01 48 63 00 00
www.samsung.com
GERMANY
01805 - SAMSUNG (726-7864 €
0,14/min)
www.samsung.com
.
297
Contact SAMSUNG worldwide
Country/Region
GEORGIA
Customer Care Center
8-800-555-555
IT and Mobile : 80111-SAMSUNG
(80111 7267864) from land line,
local charge/ from mobile, 210
6897691
GREECE
Web Site
www.samsung.com
Cameras, Camcorders,
Televisions and Household
Appliances
From mobile and fixed
2106293100
GUATEMALA
1-800-299-0013
www.samsung.com
HONDURAS
800-27919267
www.samsung.com
(852) 3698-4698
www.samsung.com/hk
HONG KONG
HUNGARY
INDIA
INDONESIA
IRAN
ITALY
www.samsung.com/
hk_en/
Country/Region
Customer Care Center
Web Site
JAMAICA
1-800-234-7267
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
JORDAN
800-22273
www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM:7799) www.samsung.com
KOSOVO
+381 0113216899
KUWAIT
183-2255
www.samsung.com
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
LATVIA
8000-7267
www.samsung.com
LITHUANIA
8-800-77777
www.samsung.com
LUXEMBURG
261 03 710
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
MACEDONIA
023 207 777
06-80-SAMSUNG (726-7864)
www.samsung.com
MEXICO
01-800-SAMSUNG (726-7864)
3030 8282
www.samsung.com
MOLDOVA
00-800-500-55-500
MONTENEGRO
020 405 888
MOROCCO
080 100 2255
www.samsung.com
NIGERIA
080-SAMSUNG(726-7864)
www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864)
(€ 0,10/min)
www.samsung.com
1800 3000 8282
0800-112-8888
www.samsung.com
021-5699-7777
021-8255
800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
.
298
Contact SAMSUNG worldwide
Country/Region
Customer Care Center
Web Site
Country/Region
Customer Care Center
Web Site
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
RUSSIA
8-800-555-55-55
www.samsung.com
NICARAGUA
00-1800-5077267
www.samsung.com
SAUDI ARABIA
9200-21230
www.samsung.com
NORWAY
815-56 480
www.samsung.com
SERBIA
0700 SAMSUNG (0700 726 7864)
www.samsung.com
OMAN
800-SAMSUNG (726-7864)
www.samsung.com
SINGAPORE
1800-SAMSUNG (726-7864)
www.samsung.com
PANAMA
800-7267
www.samsung.com
SLOVAKIA
0800-SAMSUNG (726-7864)
www.samsung.com
PERU
0-800-777-08
www.samsung.com
SOUTH AFRICA
0860 SAMSUNG (726-7864)
www.samsung.com
1800-10-SAMSUNG (726-7864)
www.samsung.com
SPAIN
902-1-SAMSUNG(902 172 678)
www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
www.samsung.com
www.samsung.com/ch
SWITZERLAND
0848-SAMSUNG (7267864, CHF
0.08/min)
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
TAIWAN
0800-329-999
www.samsung.com
1800-29-3232
www.samsung.com
PHILIPPINES
1-800-3-SAMSUNG (726-7864)
1-800-8-SAMSUNG (726-7864)
02-5805777
POLAND
0 801 1SAMSUNG (172678)
www.samsung.com
022-607-93-33
PORTUGAL
80820-SAMSUNG (726-7864)
www.samsung.com
PUERTO RICO
1-800-682-3180
www.samsung.com
THAILAND
RUMANIA
08010 SAMSUNG (08010 726
7864) only from landline, local
network Romtelecom - local tariff
/
021 206 01 10 for landline and
mobile, normal tariff.
www.samsung.com
www.samsung.com/
ch_fr/
02-689-3232
TRINIDAD &
TOBAGO
1-800-SAMSUNG (726-7864)
www.samsung.com
TURKEY
444 77 11
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
.
299
Contact SAMSUNG worldwide
Country/Region
Customer Care Center
Web Site
U.K
0330 SAMSUNG (726-7864)
www.samsung.com
U.S.A
1-800-SAMSUNG (726-7864)
www.samsung.com
0-800-502-000
www.samsung.com/ua
UKRAINE
www.samsung.com/
ua_ru
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
VENEZUELA
0-800-100-5303
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
.
300
Glossary
ADF
The following glossary helps you get familiar with the product by
understanding the terminologies commonly used with printing as well as
mentioned in this user’s guide.
802.11
802.11 is a set of standards for wireless local area network (WLAN)
communication, developed by the IEEE LAN/MAN Standards Committee (IEEE
802).
802.11b/g/n
802.11b/g/n can share same hardware and use the 2.4 GHz band. 802.11b
supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150
Mbps. 802.11b/g/n devices may occasionally suffer interference from
microwave ovens, cordless telephones, and Bluetooth devices.
An Automatic Document Feeder (ADF) is a scanning unit that will automatically
feed an original sheet of paper so that the machine can scan some amount of the
paper at once.
AppleTalk
AppleTalk is a proprietary suite of protocols developed by Apple, Inc for
computer networking. It was included in the original Macintosh (1984) and is
now deprecated by Apple in favor of TCP/IP networking.
BIT Depth
A computer graphics term describing the number of bits used to represent the
color of a single pixel in a bitmapped image. Higher color depth gives a broader
range of distinct colors. As the number of bits increases, the number of possible
colors becomes impractically large for a color map. 1-bit color is commonly
called as monochrome or black and white.
Access point
Access Point or Wireless Access Point (AP or WAP) is a device that connects
wireless communication devices together on wireless local area networks
(WLAN), and acts as a central transmitter and receiver of WLAN radio signals.
BMP
A bitmapped graphics format used internally by the Microsoft Windows
graphics subsystem (GDI), and used commonly as a simple graphics file format
on that platform.
.
301
Glossary
BOOTP
Coverage
Bootstrap Protocol. A network protocol used by a network client to obtain its IP
address automatically. This is usually done in the bootstrap process of
computers or operating systems running on them. The BOOTP servers assign
the IP address from a pool of addresses to each client. BOOTP enables 'diskless
workstation' computers to obtain an IP address prior to loading any advanced
operating system.
It is the printing term used for a toner usage measurement on printing. For
example, 5% coverage means that an A4 sided paper has about 5% image or text
on it. So, if the paper or original has complicated images or lots of text on it, the
coverage will be higher and at the same time, a toner usage will be as much as
the coverage.
CSV
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan job. CCD
Locking mechanism is also used to hold the CCD module to prevent any damage
when you move the machine.
Comma Separated Values (CSV). A type of file format, CSV is used to exchange
data between disparate applications. The file format, as it is used in Microsoft
Excel, has become a de facto standard throughout the industry, even among
non-Microsoft platforms.
Collation
DADF
Collation is a process of printing a multiple-copy job in sets. When collation is
selected, the device prints an entire set before printing additional copies.
A Duplex Automatic Document Feeder (DADF) is a scanning unit that will
automatically feed and turn over an original sheet of paper so that the machine
can scan on both sides of the paper.
Control Panel
Default
A control panel is a flat, typically vertical, area where control or monitoring
instruments are displayed. They are typically found in front of the machine.
The value or setting that is in effect when taking a printer out of its box state,
reset, or initialized.
.
302
Glossary
DHCP
DPI
A Dynamic Host Configuration Protocol (DHCP) is a client-server networking
protocol. A DHCP server provides configuration parameters specific to the DHCP
client host requesting, generally, information required by the client host to
participate on an IP network. DHCP also provides a mechanism for allocation of
IP addresses to client hosts.
Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and
printing. Generally, higher DPI results in a higher resolution, more visible detail
in the image, and a larger file size.
DIMM
Distinctive Ring Pattern Detection. Distinctive Ring is a telephone company
service which enables a user to use a single telephone line to answer several
different telephone numbers.
Dual Inline Memory Module (DIMM), a small circuit board that holds memory.
DIMM stores all the data within the machine like printing data, received fax data.
DRPD
Duplex
DLNA
The Digital Living Network Alliance (DLNA) is a standard that allows devices on
a home network to share information with each other across the network.
A mechanism that will automatically turn over a sheet of paper so that the
machine can print (or scan) on both sides of the paper. A printer equipped with
a Duplex Unit can print on both sides of paper during one print cycle.
DNS
Duty Cycle
The Domain Name Server (DNS) is a system that stores information associated
with domain names in a distributed database on networks, such as the Internet.
Duty cycle is the page quantity which does not affect printer performance for a
month. Generally the printer has the lifespan limitation such as pages per year.
The lifespan means the average capacity of print-outs, usually within the
warranty period. For example, if the duty cycle is 48,000 pages per month
assuming 20 working days, a printer limits 2,400 pages a day.
Dot Matrix Printer
A dot matrix printer refers to a type of computer printer with a print head that
runs back and forth on the page and prints by impact, striking an ink-soaked
cloth ribbon against the paper, much like a typewriter.
.
303
Glossary
ECM
EtherTalk
Error Correction Mode (ECM) is an optional transmission mode built into Class 1
fax machines or fax modems. It automatically detects and corrects errors in the
fax transmission process that are sometimes caused by telephone line noise.
A suite of protocols developed by Apple Computer for computer networking. It
was included in the original Macintosh (1984) and is now deprecated by Apple
in favor of TCP/IP networking.
Emulation
FDI
Emulation is a technique of one machine obtaining the same results as another.
Foreign Device Interface (FDI) is a card installed inside the machine to allow a
third party device such as a coin operated device or a card reader. Those devices
allow the pay-for-print service on your machine.
An emulator duplicates the functions of one system with a different system, so
that the second system behaves like the first system. Emulation focuses on exact
reproduction of external behavior, which is in contrast to simulation, which
concerns an abstract model of the system being simulated, often considering its
internal state.
Ethernet
Ethernet is a frame-based computer networking technology for local area
networks (LANs). It defines wiring and signaling for the physical layer, and frame
formats and protocols for the media access control (MAC)/data link layer of the
OSI model. Ethernet is mostly standardized as IEEE 802.3. It has become the most
widespread LAN technology in use during the 1990s to the present.
FTP
A File Transfer Protocol (FTP) is a commonly used protocol for exchanging files
over any network that supports the TCP/IP protocol (such as the Internet or an
intranet).
Fuser Unit
The part of a laser printer that fuses the toner onto the print media. It consists of
a heat roller and a pressure roller. After toner is transferred onto the paper, the
fuser unit applies heat and pressure to ensure that the toner stays on the paper
permanently, which is why paper is warm when it comes out of a laser printer.
.
304
Glossary
Gateway
IEEE
A connection between computer networks, or between a computer network
and a telephone line. It is very popular, as it is a computer or a network that
allows access to another computer or network.
The Institute of Electrical and Electronics Engineers (IEEE) is an international
non-profit, professional organization for the advancement of technology
related to electricity.
Grayscale
IEEE 1284
A shades of gray that represent light and dark portions of an image when color
images are converted to grayscale; colors are represented by various shades of
gray.
The 1284 parallel port standard was developed by the Institute of Electrical and
Electronics Engineers (IEEE). The term "1284-B" refers to a specific connector
type on the end of the parallel cable that attaches to the peripheral (for example,
a printer).
Halftone
Intranet
An image type that simulates grayscale by varying the number of dots. Highly
colored areas consist of a large number of dots, while lighter areas consist of a
smaller number of dots.
Mass storage device (HDD)
Mass storage device (HDD), commonly referred to as a hard drive or hard disk, is
a non-volatile storage device which stores digitally-encoded data on rapidly
rotating platters with magnetic surfaces.
A private network that uses Internet Protocols, network connectivity, and
possibly the public telecommunication system to securely share part of an
organization's information or operations with its employees. Sometimes the
term refers only to the most visible service, the internal website.
IP address
An Internet Protocol (IP) address is a unique number that devices use in order to
identify and communicate with each other on a network utilizing the Internet
Protocol standard.
.
305
Glossary
IPM
ITU-T
The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM
rate indicates the number of single-sided sheets a printer can complete within
one minute.
The International Telecommunication Union is an international organization
established to standardize and regulate international radio and
telecommunications. Its main tasks include standardization, allocation of the
radio spectrum, and organizing interconnection arrangements between
different countries to allow international phone calls. A -T out of ITU-T indicates
telecommunication.
IPP
The Internet Printing Protocol (IPP) defines a standard protocol for printing as
well as managing print jobs, media size, resolution, and so forth. IPP can be used
locally or over the Internet to hundreds of printers, and also supports access
control, authentication, and encryption, making it a much more capable and
secure printing solution than older ones.
ITU-T No. 1 chart
Standardized test chart published by ITU-T for document facsimile
transmissions.
IPX/SPX
JBIG
IPX/SPX stands for Internet Packet Exchange/Sequenced Packet Exchange. It is a
networking protocol used by the Novell NetWare operating systems. IPX and
SPX both provide connection services similar to TCP/IP, with the IPX protocol
having similarities to IP, and SPX having similarities to TCP. IPX/SPX was
primarily designed for local area networks (LANs), and is a very efficient protocol
for this purpose (typically its performance exceeds that of TCP/IP on a LAN).
Joint Bi-level Image Experts Group (JBIG) is an image compression standard with
no loss of accuracy or quality, which was designed for compression of binary
images, particularly for faxes, but can also be used on other images.
ISO
JPEG
Joint Photographic Experts Group (JPEG) is a most commonly used standard
method of lossy compression for photographic images. It is the format used for
storing and transmitting photographs on the World Wide Web.
The International Organization for Standardization (ISO) is an international
standard-setting body composed of representatives from national standards
bodies. It produces world-wide industrial and commercial standards.
.
306
Glossary
LDAP
MH
The Lightweight Directory Access Protocol (LDAP) is a networking protocol for
querying and modifying directory services running over TCP/IP.
Modified Huffman (MH) is a compression method for decreasing the amount of
data that needs to be transmitted between the fax machines to transfer the
image recommended by ITU-T T.4. MH is a codebook-based run-length
encoding scheme optimized to efficiently compress white space. As most faxes
consist mostly of white space, this minimizes the transmission time of most
faxes.
LED
A Light-Emitting Diode (LED) is a semiconductor device that indicates the status
of a machine.
MMR
MAC address
Media Access Control (MAC) address is a unique identifier associated with a
network adapter. MAC address is a unique 48-bit identifier usually written as 12
hexadecimal characters grouped in pairs (e. g., 00-00-0c-34-11-4e). This address
is usually hard-coded into a Network Interface Card (NIC) by its manufacturer,
and used as an aid for routers trying to locate machines on large networks.
Modified Modified READ (MMR) is a compression method recommended by ITUT T.6.
Modem
A device that modulates a carrier signal to encode digital information, and also
demodulates such a carrier signal to decode transmitted information.
MFP
MR
Multi Function Peripheral (MFP) is an office machine that includes the following
functionality in one physical body, so as to have a printer, a copier, a fax, a
scanner and etc.
Modified Read (MR) is a compression method recommended by ITU-T T.4. MR
encodes the first scanned line using MH. The next line is compared to the first,
the differences determined, and then the differences are encoded and
transmitted.
.
307
Glossary
NetWare
OSI
A network operating system developed by Novell, Inc. It initially used
cooperative multitasking to run various services on a PC, and the network
protocols were based on the archetypal Xerox XNS stack. Today NetWare
supports TCP/IP as well as IPX/SPX.
Open Systems Interconnection (OSI) is a model developed by the International
Organization for Standardization (ISO) for communications. OSI offers a
standard, modular approach to network design that divides the required set of
complex functions into manageable, self-contained, functional layers. The layers
are, from top to bottom, Application, Presentation, Session, Transport, Network,
Data Link and Physical.
OPC
Organic Photo Conductor (OPC) is a mechanism that makes a virtual image for
print using a laser beam emitted from a laser printer, and it is usually green or
rust colored and has a cylinder shape.
An imaging unit containing a drum slowly wears the drum surface by its usage
in the printer, and it should be replaced appropriately since it gets worn from
contact with the cartridge development brush, cleaning mechanism, and paper.
Originals
The first example of something, such as a document, photograph or text, etc,
which is copied, reproduced or translated to produce others, but which is not
itself copied or derived from something else.
PABX
A private automatic branch exchange (PABX) is an automatic telephone
switching system within a private enterprise.
PCL
Printer Command Language (PCL) is a Page Description Language (PDL)
developed by HP as a printer protocol and has become an industry standard.
Originally developed for early inkjet printers, PCL has been released in varying
levels for thermal, dot matrix printer, and laser printers.
PDF
Portable Document Format (PDF) is a proprietary file format developed by
Adobe Systems for representing two dimensional documents in a device
independent and resolution independent format.
.
308
Glossary
PostScript
Protocol
PostScript (PS) is a page description language and programming language used
primarily in the electronic and desktop publishing areas. - that is run in an
interpreter to generate an image.
A convention or standard that controls or enables the connection,
communication, and data transfer between two computing endpoints.
PS
Printer Driver
See PostScript.
A program used to send commands and transfer data from the computer to the
printer.
Print Media
The media like paper, envelopes, labels, and transparencies which can be used
in a printer, a scanner, a fax or, a copier.
PSTN
The Public-Switched Telephone Network (PSTN) is the network of the world's
public circuit-switched telephone networks which, on industrial premises, is
usually routed through the switchboard.
RADIUS
PPM
Pages Per Minute (PPM) is a method of measurement for determining how fast
a printer works, meaning the number of pages a printer can produce in one
minute.
Remote Authentication Dial In User Service (RADIUS) is a protocol for remote
user authentication and accounting. RADIUS enables centralized management
of authentication data such as usernames and passwords using an AAA
(authentication, authorization, and accounting) concept to manage network
access.
PRN file
Resolution
An interface for a device driver, this allows software to interact with the device
driver using standard input/output system calls, which simplifies many tasks.
The sharpness of an image, measured in Dots Per Inch (DPI). The higher the dpi,
the greater the resolution.
.
309
Glossary
SMB
TCP/IP
Server Message Block (SMB) is a network protocol mainly applied to share files,
printers, serial ports, and miscellaneous communications between nodes on a
network. It also provides an authenticated Inter-process communication
mechanism.
The Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of
communications protocols that implement the protocol stack on which the
Internet and most commercial networks run.
TCR
SMTP
Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions
across the Internet. SMTP is a relatively simple, text-based protocol, where one
or more recipients of a message are specified, and then the message text is
transferred. It is a client-server protocol, where the client transmits an email
message to the server.
SSID
Service Set Identifier (SSID) is a name of a wireless local area network (WLAN). All
wireless devices in a WLAN use the same SSID in order to communicate with
each other. The SSIDs are case-sensitive and have a maximum length of 32
characters.
Transmission Confirmation Report (TCR) provides details of each transmission
such as job status, transmission result and number of pages sent. This report can
be set to print after each job or only after failed transmissions.
TIFF
Tagged Image File Format (TIFF) is a variable-resolution bitmapped image
format. TIFF describes image data that typically come from scanners. TIFF
images make use of tags, keywords defining the characteristics of the image that
is included in the file. This flexible and platform-independent format can be
used for pictures that have been made by various image processing
applications.
Toner Cartridge
Subnet Mask
The subnet mask is used in conjunction with the network address to determine
which part of the address is the network address and which part is the host
address.
A kind of bottle or container used in a machine like a printer which contains
toner. Toner is a powder used in laser printers and photocopiers, which forms
the text and images on the printed paper. Toner can be fused by by a
combination of heat/pressure from the fuser, causing it to bind to the fibers in
the paper.
.
310
Glossary
TWAIN
Watermark
An industry standard for scanners and software. By using a TWAIN-compliant
scanner with a TWAIN-compliant program, a scan can be initiated from within
the program. It is an image capture API for Microsoft Windows and Apple
Macintosh operating systems.
A watermark is a recognizable image or pattern in paper that appears lighter
when viewed by transmitted light. Watermarks were first introduced in Bologna,
Italy in 1282; they have been used by papermakers to identify their product, and
also on postage stamps, currency, and other government documents to
discourage counterfeiting.
UNC Path
WEP
Uniform Naming Convention (UNC) is a standard way to access network shares
in Window NT and other Microsoft products. The format of a UNC path is:
\\<servername>\<sharename>\<Additional directory>
URL
Uniform Resource Locator (URL) is the global address of documents and
resources on the Internet. The first part of the address indicates what protocol to
use, the second part specifies the IP address or the domain name where the
resource is located.
Wired Equivalent Privacy (WEP) is a security protocol specified in IEEE 802.11 to
provide the same level of security as that of a wired LAN. WEP provides security
by encrypting data over radio so that it is protected as it is transmitted from one
end point to another.
WIA
Windows Imaging Architecture (WIA) is an imaging architecture that is originally
introduced in Windows Me and Windows XP. A scan can be initiated from within
these operating systems by using a WIA-compliant scanner.
USB
WPA
Universal Serial Bus (USB) is a standard that was developed by the USB
Implementers Forum, Inc., to connect computers and peripherals. Unlike the
parallel port, USB is designed to concurrently connect a single computer USB
port to multiple peripherals.
Wi-Fi Protected Access (WPA) is a class of systems to secure wireless (Wi-Fi)
computer networks, which was created to improve upon the security features of
WEP.
.
311
Glossary
WPA-PSK
WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or
home users. A shared key, or password, is configured in the wireless access point
(WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique
key for each session between a wireless client and the associated WAP for more
advanced security.
WPS
The Wi-Fi Protected Setup (WPS) is a standard for establishing a wireless home
network. If your wireless access point supports WPS, you can configure the
wireless network connection easily without a computer.
XPS
XML Paper Specification (XPS) is a specification for a Page Description Language
(PDL) and a new document format, which has benefits for portable document
and electronic document, developed by Microsoft. It is an XML-based
specification, based on a new print path and a vector-based deviceindependent document format.
.
312
A
copy
general setup
address book
copy button
emulation
179
24, 26
editing
211
general setup
202
group editing
212
basic copying
61
group registering
212
reducing or enlarging copies
62
registering
211
using
211
address book setup
211
administrator’s setup
204
AnyWeb Print
256
authorized users
registering
214
copying
custom setup
default settings
tray setting
79
pickup roller
scan unit
convention
14
F
57
51
adding documents to a reserved fax
243
automatic redialing
241
202
changing the receive modes
247
202
delaying a fax transmission
243
147
forwarding a received fax to another
destination
245
forwarding a sent fax to another destination
244
E
83
24
98
document box
email
control panel
error message
244
81
79
210
canceling a reserved fax job
eco printing
cleaning a machine
entering character
223
Unix
outside
201
direct printing utility
cleaning
80
emulation setup
fax
driver installation
inside
201
favorites settings, for printing
D
general setup
C
205
general setup
general setup
58
general setup
186
printing faxes on both sides of the paper
250
201
Printing sent fax report automatically 251
email address
208
receiving a fax in the computer
246
searching
208
receiving faxes in memory
250
storing
208
receiving in Answering Machine mode 248
313
receiving in DRPD mode
248
general settings
192
printer properties
227
receiving in Fax mode
248
glossary
301
printing
225
receiving in secure mode
249
scanning
238
receiving in Tel mode
248
I
system requirements
110
receiving with ext. telephone
248
id copy
unifled driver configurator
268
redialing the last number
241
ID copy button
using SetIP
140
sending a fax in the computer
242
sending a priority fax
244
J
sending faxes on both sides of paper
246
jam
fax feature
241
67
adjusting darkness
69
adjusting resolution
69
preparing to fax
66
receiving in Fax mode
68
loading
clearing original document
87
paper in manual feeder/multi-purpose tray
44
clearing paper
91
paper in the tray1
43
tips for avoiding paper jams
86
special media
45
5
M
LCD display
browsing the machine status 179, 185, 186,
191, 196
Linux
common Linux problems
print media feature
105
driver installation for network connected
146
294
G
driver installation for USB cable connected
133
general icons
driver reinstallation for USB cable connected
135
14
machine information 179, 185, 186, 191, 196
machine setup
machine status
176
21
52
L
machine features
front view
238
loading originals
faxing
features
24, 25
linux scanning
fax sending
multi sending
63
179, 185, 186, 191, 196
Macintosh
common Macintosh problems
293
driver installation for network connected
144
driver installation for USB cable connected
131
driver reinstallation for USB cable connected
314
132
introducing network programs
137
preparing originals type
printing
224
IPv6 configuration
150
print
scanning
237
SetIP program
system requirements
109
wired network setup
138
using SetIP
139
wireless network setup
153
macintosh scanning
maintenance parts
237
loading
memory/hard drive feature
menu overview
n-up printing
Macintosh
73
manual feeder/multi-purpose tray
44
252, 253
31
138, 139, 140, 171
on hook dial button
using special media
45
25
optional memory
setting up the optional memory
44
253
optional tray
loading paper
43
overlay printing
create
221
network
delete
221
print
221
general setup
installing environment
146
144
147
141
202, 203
111
178
print media
card stock
50
envelope
46
labels
49
105
preprinted paper
50
setting the paper size
51
setting the paper type
51
special media
45
transparency
48
print menu
178
print resolution set
N
driver installation
Linux
Macintosh
UNIX
Windows
general setup
output support
O
multi-purpose tray
tips on using
224
51
Linux
226
printer preferences
Linux
227
printer status
P
general information
placing a machine
adjusting the altitude
Printing
207
postScript driver
troubleshooting
264, 266
296
55
printing
changing the default print settings
215
Linux
225
315
Macintosh
224
multiple pages on one sheet of paper
224
Macintosh
printing a document
Windows
55
printing problems
275
Scanning with Samsung Scan Assitant 235
printing quality problems
279
Scanning with SmarThru 4
scanning problems
288
R
printing on both sides of paper
Macintosh
225
redial/pause button
printing to a file
216
regulatiory information
setting as a default machine
215
reports
special printer features
217
UNIX
227
using direct printing utility
223
rear view
23
basic information
230
Linux scanning
238
Macintosh scanning
237
Scanning from image editing program 234
113
Scanning from network connected machine
231
resolution
faxing
scanning
25, 26
machine information 179, 186, 187, 188,
191,
192, 193, 196, 197
printing a document
236
69
Scanning to email
232
Scanning to FTP/SMB server
233
Scanning using the WIA driver
235
Scanning with SmarThru Office
236
service contact numbers
297
Linux
225
Macintosh
224
S
SetIP program
UNIX
227
safety
SmarThru 4
236
printing feature
215
problem
operating system problems
292
problems
information
15
SmarThru Office
236
symbols
15
Special features
206
specifications
103
print media
105
Samsung Printer Status
264
scan
copying problems
287
faxing problems
290
paper feeding problems
power problems
138, 171
general setup
190
status
Scan Assitant
235
Storing
273
scan feature
230
supplies
274
Scanning
available supplies
25, 26
208
72
316
monitoring the supplies life
77
ordering
72
replacing toner cartridge
75
SyncThru Web Service
system requirements
usb
general setupusb
110
Infrastructure mode
153
200
installation
153
200
USB cable
159
WPS
disconnectiong
PBC mode
155
155
USB cable
general information
258
driver installation
SyncThru™ Web Service
258
driver reinstallation
28, 29, 131, 133
using help
T
132, 135
58, 225
W
toner cartridge
redistributing toner
74
watermark
replacing the cartridge
75
create
220
delete
220
220
tray
adjusting the width and length
41
edit
changing the tray size
41
Windows
loading paper in manual
feeder/multi-purpose tray
44
setting the paper size and type
51
common Windows problems
WPS (the machine does not have a display
screen)
156
PBC
156
PIN
wireless network
network cable
170
292
driver installation for network connected
141
driver installation for USB cable connected
28,
29
U
understanding the status LED
96
using SetIP
UNIX
driver installation for network connected
147
printing
Unix
system requirements
227
108
138, 171
wireless
ad hoc mode
153
computer
154
control panel
153
317
Download PDF