E024U Loop Detector
Interface
FAAC International Inc.
Headquarter & East Coast Operations
3160 Murrell Road
Rockledge, FL 32955
Tel. 800 221 8278
www.faacusa.com
FAAC International Inc.
West Coast Operations
357 South Acacia Avenue
Fullerton, CA 92831
The 2670.1 loop detector interface allows to connect up to three plug-in detectors associated with standard functions. The board is designed to fit in the FAAC standard 16” x 14”
enclosure on the existing DIN rail. To connect the interface board:
1)
Connect the 2EASY BUS from the E024U to the interface board (no polarity)
2)
Connect pin 8 on the E024U board (+24V) to the +24 input on the interface board
3)
Connect pin 7 on the E024U board (GND) to the GND input on the interface board
4)
Connect the loops to the interface board as in Fig. 1 below
E024U CONTROL BOARD
SHADOW
REVERSE
OPEN
A
B
OPEN
STP CL OP
FSW
LED
SHADOW
REVERSE
OPEN
Fig. 1
Turn the power on on the E024U board. The LED on the interface board will blink briefly and
then will stay ON solid if the BUS connection is working correctly.
IMPORTANT: Briefly press the SW1 button on the E024U board to make it aware of the presence of the additional interface board.
To make sure the board is working properly you can check the behaviour of BUS LED on the
E024U board. It will be normally on when none of the loop detectors is active. If any of the
detectors is activated the LED will turn off.
L o o p De tec tor Inter fa ce
2
LIMITED WARRANTY
To the original purchaser only:
FAAC International, Inc., warrants, for twentyfour (24) months from the date of invoice, the
gate operator systems and other related systems and equipment manufactured by FAAC
S.p.A. and distributed by FAAC International,
Inc., to be free from defects in material and
workmanship under normal use and service for
which it was intended provided it has been properly installed and operated.
FAAC International, Inc.’s obligations under
this warranty shall be limited to the repair or
exchange of any part of parts manufactured by
FAAC S.p.A. and distributed by FAAC International, Inc. Defective products must be returned
to FAAC International, Inc., freight prepaid by
purchaser, within the warranty period. Items
returned will be repaired or replaced, at FAAC
International, Inc.’s option, upon an examination
of the product by FAAC International, Inc., which
discloses, to the satisfaction of FAAC International, Inc., that the item is defective. FAAC
International, Inc. will return the warranted item
freight prepaid. The products manufactured by
FAAC S.p.A. and distributed by FAAC International, Inc., are not warranted to meet the
specific requirements, if any, of safety codes
of any particular state, municipality, or other
jurisdiction, and neither FAAC S.p.A. or FAAC
International, Inc., assume any risk or liability whatsoever resulting from the use thereof,
whether used singly or in combination with other
machines or apparatus.
Any products and parts not manufactured by
FAAC S.p.A. and distributed by FAAC International, Inc., will carry only the warranty, if any, of
the manufacturer. This warranty shall not apply to any products or parts thereof which have
been repaired or altered, without FAAC International, Inc.’s written consent, outside of FAAC
International, Inc.’s workshop, or altered in any
way so as, in the judgment of FAAC International, Inc., to affect adversely the stability or
reliability of the product(s) or has been subject
to misuse, negligence, or accident, or has not
been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions
or has been operated under conditions more
severe than, or otherwise exceeding, those set
forth in the specifications for such product(s).
Neither FAAC S.p.A. nor FAAC International,
Inc., shall be liable for any loss or damage
whatsoever resulting, directly or indirectly, from
the use or loss of use of the product(s). Without
L o o p De tec tor Inter fa ce
limiting the foregoing, this exclusion from liability
embraces a purchaser’s expenses for downtime
or for making up downtime, damages for which
the purchaser may be liable to other persons,
damages to property, and injury to or death of
any persons.
FAAC S.p.A. or FAAC International, Inc., neither
assumes nor authorizes any person to assume
for them any other liability in connection with
the sale or use of the products of FAAC S.p.A.
or FAAC International, Inc. The warranty herein
above set forth shall not be deemed to cover
maintenance parts, including, but not limited to,
hydraulic oil, filters, or the like. No agreement to
replace or repair shall constitute an admission
by FAAC S.p.A. or FAAC International, Inc., of
any legal responsibility to effect such replacement, to make such repair, or otherwise. This
limited warranty extends only to wholesale customers who buy directly through FAAC International, Inc.’s normal distribution channels. FAAC
International, Inc., does not warrant its products
to end consumers.
Consumers must inquire from their selling dealer
as to the nature and extent of that dealer’s warranty, if any. This warranty is expressly in lieu of
all other warranties expressed or implied including the warranties of merchantability and fitness
for use. This warranty shall not apply to products or any part thereof which have been subject to accident, negligence, alteration, abuse,
or misuse or if damage was due to improper
installation or use of improper power source, or
if damage was caused by fire, flood, lightning,
electrical power surge, explosion, wind storm,
hail, aircraft or vehicles, vandalism, riot or civil
commotion, or acts of God.
© 2018, FAAC International, Inc. - All Rights Reserved
Published in May 2018
3
">