BT | Colour Printer | User guide | BT Colour Printer User guide

User Guide
HP Officejet
100
HP Officejet 100 (L411)
Mobile Printer
User Guide
Copyright information
© 2014 Copyright Hewlett-Packard
Development Company, L.P.
Edition 2, 1/2014
Hewlett-Packard Company
notices
The information contained in this
document is subject to change without
notice.
All rights reserved. Reproduction,
adaptation, or translation of this
material is prohibited without prior
written permission of Hewlett-Packard,
except as allowed under copyright
laws.
The only warranties for HP products
and services are set forth in the
express warranty statements
accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for
technical or editorial errors or
omissions contained herein.
Acknowledgements
Bluetooth is a trademark owned by its
proprietor and used by HewlettPackard Company under license.
ENERGY STAR and the ENERGY
STAR mark are registered U.S. marks.
Microsoft, Windows, Windows XP,
Windows Vista, Windows Mobile,
Windows 7, and Windows 8 are U.S.
registered trademarks of Microsoft
Corporation.
Safety information
Always follow basic safety precautions
when using this product to reduce risk
of injury from fire or electric shock.
1. Read and understand all
instructions in the documentation that
comes with the printer.
2. Observe all warnings and
instructions marked on the product.
3. Unplug this product from wall
outlets before cleaning.
4. Do not install or use this product
near water, or when you are wet.
5. Install the product securely on a
stable surface.
6. Install the product in a protected
location where no one can step on or
trip over the line cord, and the line
cord cannot be damaged.
7. If the product does not operate
normally, see Solve a problem.
8. There are no user-serviceable parts
inside. Refer servicing to qualified
service personnel.
Contents
1
Get started
Accessibility................................................................................................................................7
Eco..............................................................................................................................................7
Understand the printer parts.......................................................................................................9
Front view.............................................................................................................................9
Back and side view.............................................................................................................10
Printing supplies area.........................................................................................................11
Control Panel......................................................................................................................11
Bottom view........................................................................................................................12
Finding the printer model number.............................................................................................12
Select print media.....................................................................................................................13
Recommended papers for printing and copying.................................................................13
Recommended papers for photo printing...........................................................................14
Tips for selecting and using media.....................................................................................15
Load media...............................................................................................................................15
Load standard-size media..................................................................................................16
Load envelopes..................................................................................................................16
Load cards and photo paper...............................................................................................17
Load custom-size media.....................................................................................................17
Install and use the battery........................................................................................................18
Battery safety......................................................................................................................18
Understand the battery.......................................................................................................19
Charge and use the battery................................................................................................19
Connect a memory device or camera.......................................................................................21
To connect a storage device..............................................................................................21
To connect a PictBridge-compatible camera......................................................................21
To transfer photos to your computer..................................................................................21
Print from mobile phones..........................................................................................................22
Maintain the printer...................................................................................................................22
Clean the printer.................................................................................................................22
Turn off the printer....................................................................................................................22
2
Print
Print documents........................................................................................................................23
Print documents (Windows)................................................................................................23
Print documents (Mac OS X)..............................................................................................24
Print brochures.........................................................................................................................24
Print brochures (Windows).................................................................................................24
Print brochures (Mac OS X)................................................................................................24
Print on envelopes....................................................................................................................25
Print on envelopes (Windows)............................................................................................25
Print on envelopes (Mac OS X)..........................................................................................25
1
Print photos..............................................................................................................................26
Print photos on photo paper (Windows).............................................................................26
Print photos on photo paper (Mac OS X)...........................................................................26
Print on special and custom-size paper....................................................................................27
Print on special or custom-size paper (Mac OS X).............................................................27
Print borderless documents......................................................................................................28
Print borderless documents (Windows)..............................................................................28
Print borderless documents (Mac OS X)............................................................................29
Print on both sides (duplexing).................................................................................................29
To perform duplexing (Windows)........................................................................................29
To perform duplexing (Mac OS X)......................................................................................30
3
Work with ink cartridges
Information about ink cartridges...............................................................................................31
Check the estimated ink levels.................................................................................................32
Handle the ink cartridges..........................................................................................................33
Replace the ink cartridges........................................................................................................33
Print with a single ink cartridge.................................................................................................36
Store printing supplies..............................................................................................................36
Ink cartridge maintenance........................................................................................................36
Align the ink cartridges.......................................................................................................36
Calibrate color.....................................................................................................................37
Clean the ink cartridges......................................................................................................37
To clean ink cartridges automatically...........................................................................38
4
Solve a problem
HP support................................................................................................................................39
Obtain electronic support....................................................................................................39
HP support by phone..........................................................................................................40
Before you call..............................................................................................................40
Phone support period...................................................................................................40
Telephone support numbers.........................................................................................41
After the phone support period.....................................................................................43
Troubleshooting tips and resources.........................................................................................43
Solve printing problems............................................................................................................43
The printer shuts down unexpectedly.................................................................................44
All printer lights are on or flashing......................................................................................44
The printer is not responding (nothing prints).....................................................................44
Printer does not accept ink cartridge..................................................................................45
Printer takes a long time to print.........................................................................................45
Blank or partial page printed...............................................................................................46
Something on the page is missing or incorrect...................................................................46
Placement of the text or graphics is wrong.........................................................................47
2
Contents
Poor print quality and unexpected printouts.............................................................................48
General tips........................................................................................................................48
Meaningless characters print..............................................................................................49
Ink is smearing....................................................................................................................50
Ink is not filling the text or graphics completely..................................................................51
Output is faded or dull colored............................................................................................51
Colors are printing as black and white................................................................................52
Wrong colors are printing...................................................................................................52
Printout shows bleeding colors...........................................................................................52
Colors do not line up correctly............................................................................................53
Streaks or lines in printouts................................................................................................53
Advanced ink cartridge maintenance.......................................................................................54
Clean the ink cartridge contacts.........................................................................................54
Clean the area around the ink nozzles...............................................................................55
Replace the ink service module..........................................................................................57
Solve paper-feed problems......................................................................................................57
Media is not supported for the printer.................................................................................57
Media is not picked up........................................................................................................58
Media is not coming out correctly.......................................................................................58
Pages are skewing.............................................................................................................58
Multiple pages are being picked up....................................................................................58
Troubleshoot installation issues...............................................................................................58
Hardware installation suggestions......................................................................................58
Software installation suggestions.......................................................................................59
Problems setting up Bluetooth wireless communication....................................................60
Check the Bluetooth settings........................................................................................60
Check the Bluetooth wireless signal.............................................................................60
Understand the printer information pages................................................................................60
Print printer information pages from the control panel........................................................61
Print printer information pages from the software...............................................................61
Clear jams.................................................................................................................................62
Clear a jam in the printer....................................................................................................62
Tips for avoiding jams.........................................................................................................63
Control panel lights reference...................................................................................................64
A
Technical information
Warranty information................................................................................................................69
Hewlett-Packard limited warranty statement......................................................................70
Ink cartridge warranty information......................................................................................71
3
Printer specifications................................................................................................................72
Physical specifications........................................................................................................72
Printer features and capacities...........................................................................................72
Processor and memory specifications................................................................................72
System requirements..........................................................................................................72
Memory device specifications.............................................................................................73
Mobile phone printing information......................................................................................73
Media specifications...........................................................................................................73
Understand specifications for supported media...........................................................74
Set minimum margins...................................................................................................75
Guidelines for two-sided (duplex) printing....................................................................76
Print resolution....................................................................................................................76
Operating environment.......................................................................................................76
Electrical requirements.......................................................................................................77
Acoustic emission specification..........................................................................................77
Regulatory information.............................................................................................................78
Regulatory model number..................................................................................................78
FCC statement....................................................................................................................79
Notice to users in Korea.....................................................................................................79
VCCI (Class B) compliance statement for users in Japan..................................................79
Notice to users in Japan about the power cord..................................................................80
Noise emission statement for Germany.............................................................................80
LED indicator statement.....................................................................................................80
Gloss of housing of peripheral devices for Germany..........................................................80
Regulatory information for wireless products.....................................................................80
Exposure to radio frequency radiation..........................................................................80
Notice to users in Brazil................................................................................................81
Notice to users in Canada............................................................................................81
Notice to users in Taiwan.............................................................................................81
European Union Regulatory Notice....................................................................................81
Environmental product stewardship program...........................................................................83
Paper use...........................................................................................................................83
Plastics...............................................................................................................................83
Material safety data sheets.................................................................................................83
Recycling program..............................................................................................................83
HP inkjet supplies recycling program.................................................................................83
Disposal of waste equipment by users in private households in the European Union.......84
Power consumption............................................................................................................85
Chemical Substances.........................................................................................................85
Battery information..............................................................................................................85
RoHS notices (China only).................................................................................................86
Third-party licenses..................................................................................................................87
HP Officejet 100 (L411) Mobile Printer...............................................................................87
B
4
HP supplies and accessories
Order printing supplies online...................................................................................................91
Accessories..............................................................................................................................91
Supplies....................................................................................................................................91
Ink cartridges......................................................................................................................91
HP media............................................................................................................................92
Contents
C
Set up the printer for Bluetooth communication
Set up a Bluetooth wireless connection....................................................................................93
Set Bluetooth security for the printer........................................................................................93
Use a passkey to authenticate Bluetooth devices..............................................................94
Set the printer to be visible or not visible to Bluetooth devices..........................................94
To reset to factory default settings.....................................................................................94
D
Printer management tools
Toolbox (Windows)...................................................................................................................95
HP Utility (Mac OS X)...............................................................................................................95
Toolbox software for PDAs (Microsoft Windows Mobile)..........................................................95
Uninstall and reinstall the HP software.....................................................................................95
Index............................................................................................................................................107
5
6
1
Get started
This guide provides details about how to use the printer and how to resolve problems.
•
•
•
•
•
•
•
•
•
•
•
Accessibility
Eco
Understand the printer parts
Finding the printer model number
Select print media
Load media
Install and use the battery
Connect a memory device or camera
Print from mobile phones
Maintain the printer
Turn off the printer
Accessibility
The printer provides a number of features that make it accessible for people with
disabilities.
Visual
The HP software provided with the printer is accessible for users with visual
impairments or low vision by using the operating system's accessibility options and
features. The software also supports most assistive technology such as screen
readers, Braille readers, and voice-to-text applications. For users who are color blind,
colored buttons and tabs used in the HP software and on the printer control panel have
simple text or icon labels that convey the appropriate action.
Mobility
For users with mobility impairments, the HP software functions can be executed
through keyboard commands. The HP software also supports Microsoft® Windows®
accessibility options such as StickyKeys, ToggleKeys, FilterKeys, and MouseKeys. The
printer doors, buttons, paper trays, and paper guides can be operated by users with
limited strength and reach.
Support
For more details about the accessibility of this printer and HP's commitment to product
accessibility, visit HP's Web site at www.hp.com/accessibility.
For accessibility information for Mac OS X, visit the Apple Web site at www.apple.com/
accessibility.
Eco
Hewlett-Packard is committed to providing quality products in an environmentally
sound manner. Design for recycling has been incorporated into this product. For more
information, seeEnvironmental product stewardship program.
Get started
7
Chapter 1
HP is committed to helping customers reduce their environmental footprint. HP has
provided these features to help you focus on ways to assess and reduce the impact of
your printing choices.
For more information about HP's environmental initiatives, visit www.hp.com/hpinfo/
globalcitizenship/environment/.
Manage power
To conserve electricity and extend the length of time you can use the printer, the
printer comes with the following features:
•
•
Sleep mode
Power usage is reduced while in Sleep mode. After initial setup of printer, the
printer will enter Sleep mode after 10 minutes of inactivity. The time to Sleep
mode cannot be changed.
Auto-Off
Auto Power-Off is automatically enabled by default when you turn on the printer.
When Auto Power-Off is enabled, the printer will automatically turn off after 15
minutes of inactivity to help reduce energy use. The feature is turned on
regardless of whether the printer is running on battery power or connected to a
power outlet. You can change the setting from the control panel. Once you
change the setting, the printer will maintain the setting that you choose. Auto
Power-Off turns the printer off completely, so you must use the power button to
turn the printer back on.
◦
To change the Auto Power-Off setting from the printer control panel
To turn off the feature, press and hold the (Bluetooth) button and the
(Cancel) button simultaneously for at least 5 seconds, and then release
the buttons. To turn it on, repeat the same.
NOTE: To find out the currently set time, when the printer is ready,
press and hold the (Cancel) button for at least 3 seconds. A page will
be printed with the time indicated. In addition, even when Auto PowerOff is turned off, the printer will enter Sleep mode after 10 minutes of
inactivity.
◦
To change the Auto Power-Off setting from the printer software
Windows: Open Toolbox. (For more information, see Toolbox (Windows).)
In the Services tab, click Power Settings, and then select the preferred
amount of time.
Mac OS X: Open HP Utility. (For more information, see HP Utility (Mac OS
X).) In the Printer Settings section, click Power Management, and then
select the preferred amount of time.
In addition, try the following:
•
•
Turn off Bluetooth when not in use. To turn off Bluetooth, press the (Bluetooth)
button on the printer’s control panel.
To maximize battery life and capacity, be sure to charge, use, and store the
battery in places that meet the recommended temperature guidelines. For more
information about using the battery, see Install and use the battery.
Conserve printing supplies
8
Get started
To conserve printing supplies such as ink and paper, try the following:
•
•
Change the print mode to a draft setting. Draft setting uses less ink.
Do not clean the ink cartridges unnecessarily. This wastes ink and shortens the
life of the cartridges.
Reduce paper usage by printing on both sides of the paper. For more information,
see Print on both sides (duplexing).
•
Understand the printer parts
•
•
•
•
•
Front view
Back and side view
Printing supplies area
Control Panel
Bottom view
Front view
1
Media width guide – Adjusts to accommodate different media sizes.
2
Input tray – Holds the media. Remove media and close this tray when the printer is not
in use.
NOTE: If you are loading larger-size media, pull to extend the tray.
3
Narrow media guide – When sliding the media width guide to the right and against
narrow or small media, this guide automatically slides to the left slightly.
4
Front access cover – Provides access to the ink cartridges and for clearing paper jams.
This cover must be closed before printing can begin.
5
Output slot – Media exits the printer here.
Understand the printer parts
9
Chapter 1
(continued)
6
Output door – Covers the output slot when the printer is not in use. Drops open
automatically when printer is turned on.
Back and side view
10
1
PictBridge/USB Host Port – Connects a PictBridge device, such as a digital camera or a
USB Flash drive.
2
Battery contact cover – Covers the battery contacts when the optional battery is not
installed.
3
USB port – Connect a USB cable here.
4
Battery slot – Install optional battery here.
5
Power connector – Connect the power cord here.
Get started
Printing supplies area
2
3
1
1
Front access cover – Provides access to the ink cartridges and for clearing paper jams.
This cover must be closed before printing can begin.
2
Print cartridge latches – Lift these latches for easy removal and insertion of print
cartridges.
3
Print cartridge cradle compartments – Holds the print cartridges.
Control Panel
1
Battery status light – Indicates battery status:
•
•
•
•
2
Red – Battery less than 10% charged
Amber – Battery 10% to 40% charged
Green – Battery 41% to 100% charged
Not lit if optional battery is not installed or detected.
Battery charging light – Lights up in amber when the battery is charging. Lights up
in red if the battery is faulty.
Understand the printer parts
11
Chapter 1
(continued)
3
Left ink cartridge light – Blinks when the left ink cartridge is absent or functioning
incorrectly. Turns on solid when the ink is low.
4
Right ink cartridge light – Blinks when the right ink cartridge is absent or functioning
incorrectly. Turns on solid when the ink is low.
5
Bluetooth button and light – Turns Bluetooth device on or off. Lights up blue
when Bluetooth is turned on.
6
(Cancel button) – Cancels the current print job. Cancel time depends on the size
of the print job. Press this button only once to cancel a queued print job.
7
Resume button and light – Resumes a print job that is waiting or has been
interrupted (for example, when adding print media to the printer).
Lights up in amber when a print job is waiting, and blinks or turns on to show status or
a need for intervention.
8
Power button and light – Turns the printer off or on.
Lights up in white when the printer is turned on, and blinks during printing, startup,
shutdown, or other activity. This light also pulses when the printer is in sleep mode.
Bottom view
1
Cover of replaceable ink service module – Provides access to the ink service module.
(See Replace the ink service module.)
2
Card holder – Holds a name card or business card.
Finding the printer model number
In addition to the model name that appears on the front of the printer, this printer has a
specific model number. You can use this number when obtaining support and to help
determine which supplies or accessories are available for your printer.
The model number is printed on a label located inside the printer, near the ink
cartridges area.
12
Get started
Select print media
The printer is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
print quality. Visit the HP Web site at www.hp.com for more information about HP
media.
HP recommends plain papers with the ColorLok logo for printing
and copying of everyday documents. All papers with the
ColorLok logo are independently tested to meet high standards
of reliability and print quality, and produce documents with crisp,
vivid color, bolder blacks and dry faster than ordinary plain
papers. Look for papers with the ColorLok logo in a variety of
weights and sizes from major paper manufacturers.
This section contains the following topics:
•
•
•
Recommended papers for printing and copying
Recommended papers for photo printing
Tips for selecting and using media
Recommended papers for printing and copying
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
HP Brochure Paper
HP Superior Inkjet
Paper
These papers are glossy-coated or matte-coated on both sides for
two-sided use. They are the perfect choice for near-photographic
reproductions and business graphics for report covers, special
presentations, brochures, mailers, and calendars.
HP Bright White Inkjet
Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp
text. It is opaque enough for two-sided color usage with no showthrough, which makes it ideal for newsletters, reports, and flyers. It
features ColorLok Technology for less smearing, bolder blacks and
vivid colors.
HP Printing Paper
HP Printing Paper is a high-quality multifunction paper. It produces
documents that look and feel more substantial than documents
printed on standard multipurpose or copy paper. It features ColorLok
Technology for less smearing, bolder blacks and vivid colors. It is
acid-free for longer lasting documents.
HP Office Paper
HP Office Paper is a high-quality multifunction paper. It is suitable for
copies, drafts, memos and other everyday documents. It features
ColorLok Technology for less smearing, bolder blacks and vivid
colors. It is acid-free for longer lasting documents
HP Office Recycled
Paper
HP Office Recycled Paper is a high-quality multifunction paper made
with 30% recycled fiber. It features ColorLok Technology for less
smearing, bolder blacks and vivid colors. It is acid-free for longer
lasting documents.
Select print media
13
Chapter 1
(continued)
HP Premium
Presentation Paper
HP Professional Paper
These papers are heavy two-sided matte papers perfect for
presentation, proposals, reports and newsletters. They are
heavyweight for an impressive look and feel.
HP Advanced Photo
Paper
This thick photo paper features an instant-dry finish for easy handling
without smudging. It resists water, smears, fingerprints, and humidity.
Your prints have a look and feel comparable to a store processed
photo. It is available in several sizes, including A4, 8.5 x 11 inch, 10 x
15 cm (4 x 6 inch), 13x18 cm (5 x 7 inch) and two finishes – glossy or
soft gloss (satin matte). It is acid-free for longer lasting documents.
HP Everyday Photo
Paper
Print colorful, everyday snapshots at a low cost, using paper
designed for casual photo printing. This affordable, photo paper dries
quickly for easy handling. Get sharp, crisp images when you use this
paper with any inkjet printer. Available in semi-gloss finish in 8.5 x 11
inch, A4, 4 x 6 inch and 10 x 15 cm. It is acid-free for longer lasting
documents.
HP Iron-On Transfers
HP Iron-on Transfers (for color fabrics or for light or white fabrics) are
the ideal solution for creating custom T-shirts from your digital photos.
To order HP papers and other supplies, go to www.hp.com/buy/supplies. If prompted,
select your country/region, follow the prompts to select your printer, and then click one
of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English
only.
Recommended papers for photo printing
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
HP Advanced Photo Paper
This thick photo paper features an instant-dry finish for easy handling without
smudging. It resists water, smears, fingerprints, and humidity. Your prints have a look
and feel comparable to a store processed photo. It is available in several sizes,
including A4, 8.5 x 11 inch, 10 x 15 cm (4 x 6 inch), 13 x 18 cm (5 x 7 inch) and two
finishes – glossy or soft gloss (satin matte). It is acid-free for longer lasting documents.
HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo
printing. This affordable, photo paper dries quickly for easy handling. Get sharp, crisp
images when you use this paper with any inkjet printer. Available in semi-gloss finish in
8.5 x 11 inch, A4, 4 x 6 inch and 10 x 15 cm. It is acid-free for longer lasting
documents.
HP Photo Value Packs
HP Photo Value Packs conveniently package original HP ink cartridges and HP
Advanced Photo Paper to save you time and take the guesswork out of printing
affordable professional photos with your HP printer. Original HP inks and HP Advanced
Photo Paper have been designed to work together so your photos are long lasting and
14
Get started
vivid, print after print. Great for printing out an entire vacation’s worth of photos or
multiple prints to share.
To order HP papers and other supplies, go to www.hp.com/buy/supplies. If prompted,
select your country/region, follow the prompts to select your printer, and then click one
of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English
only.
Tips for selecting and using media
For the best results, observe the following guidelines.
•
•
•
•
•
Always use media that conforms to the printer specifications. For more
information, see Media specifications.
Load only one type of media at a time into a tray.
When loading the tray, make sure the media is loaded correctly. For more
information, see Load media.
Do not overload the tray. For more information, see Media specifications.
To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the tray:
◦
Multipart forms
◦
Media that is damaged, curled, or wrinkled
◦
Media with cutouts or perforations
◦
Media that is heavily textured, embossed, or does not accept ink well
◦
Media that is too lightweight or stretches easily
◦
Media that contains staples or clips
Load media
This section provides instructions for loading media into the printer.
CAUTION: Use only media that is supported by the printer. For more information,
see Media specifications.
This section contains the following topics:
•
•
•
•
Load standard-size media
Load envelopes
Load cards and photo paper
Load custom-size media
Load media
15
Chapter 1
Load standard-size media
To load media
Use these instructions to load standard media.
1.
2.
Lift the input tray.
Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized media, pull the input tray to extend it.
3.
Insert the plain paper print-side up and align it squarely against the paper guide.
NOTE: Do not load paper while the printer is printing.
4.
Adjust the paper width guide so it fits snugly against the sides of the paper.
Load envelopes
To load envelopes
Use these instructions to load an envelope
1.
2.
Lift the input tray.
Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized envelopes, pull the input tray to extend
it.
16
Get started
3.
Load envelopes according to the graphic in the tray.
NOTE: Do not load envelopes while the printer is printing.
4.
Adjust the width guide so it fits snugly against the sides of the envelope.
Load cards and photo paper
To load cards and photo paper
Use these instructions to load photo paper.
1.
2.
Lift the input tray.
Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized media, pull the input tray to extend it.
3.
Insert the media print-side up and align it squarely against the paper guide. If the
photo paper has a tab along one edge, make sure the tab is pointing up.
NOTE: Do not load paper while the printer is printing.
4.
Adjust the paper width guide so it fits snugly against the sides of the paper.
Load custom-size media
To load cards and photo paper
Use these instructions to load custom-size media.
CAUTION: Use only custom-size media that is supported by the printer. For more
information, see Media specifications.
Load media
17
Chapter 1
1.
2.
Lift the input tray.
Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-sized media, pull the input tray to extend it.
3.
Insert the media print-side up and align it squarely against the paper guide.
NOTE: Do not load paper while the printer is printing.
4.
Adjust the paper width guide so it fits snugly against the sides of the paper.
Install and use the battery
The lithium-ion rechargeable battery comes with the HP Officejet 100 Mobile Printer in
some countries/regions and is available for purchase as an optional accessory in other
countries/regions. For more information, see HP supplies and accessories.
This section contains the following topics:
•
•
•
Battery safety
Understand the battery
Charge and use the battery
Battery safety
•
•
•
•
•
•
•
•
Use only the battery designed specifically for the printer. For more information,
see HP supplies and accessories and Printer specifications.
When discarding a battery, contact your local waste disposal provider regarding
local restrictions on the disposal or recycling of batteries. Though the lithium-ion
rechargeable battery is mercury-free, it might require recycling or proper disposal
at end-of-life. For more information, see Recycling program.
The battery might explode if incorrectly replaced or disposed of in fire. Do not
short-circuit the battery.
To purchase a replacement battery, contact your local dealer or HP sales office.
For more information, see HP supplies and accessories.
To avoid risk of fire, burns, or damage to the battery, do not allow a metal object
to touch the battery contacts.
Do not disassemble the battery. The battery has no serviceable parts inside.
Handle a damaged or leaking battery with extreme care. If you come in contact
with the electrolyte, wash the exposed area with soap and water. If it contacts the
eye, flush the eye with water for 15 minutes and seek medical attention.
Do not charge, store, or use the battery in places where the temperature exceeds
the limits specified in Operating environment.
Important notes
Take note of the following when charging or using the battery:
•
•
18
Charge the battery for 4 hours before using the battery for the first time. For
subsequent charges, it takes approximately 3 hours to fully charge the battery.
The battery charge light is amber when the battery is charging. If it is red, the
battery might be faulty and need to be replaced.
Get started
•
The battery status light is green when the battery is 41-100% charged, amber
when 10-40% charged, red when less than 10% charged, and blinks red when
less than 2% charged. Charge the battery when the battery status light turns
amber. If it turns red, charge the battery as soon as possible. The battery status
is also displayed in Toolbox (Windows) and HP Utility (Mac OS X). If you are
using a Microsoft Windows Mobile® device, you can use the Toolbox software for
PDAs. For more information, see Printer management tools.
If the battery is running low, either plug in the AC adapter to charge it or replace
the battery with one that is charged.
A fully charged battery can print up to approximately 500 pages, depending on
the complexity of print jobs.
By default, the printer turns itself off to conserve the battery if left idle for 15
minutes on battery power. You can configure this feature in Toolbox (Windows),
HP Utility (Mac OS X), or the Toolbox software for PDAs (Windows Mobile). For
more information, see Printer management tools.
Prior to long-term storage, fully charge the battery. Do not leave the battery in a
discharged (empty) state for more than 6 months.
To maximize battery life and capacity, charge, store, and use the battery in
places that meet the guidelines specified in Operating environment.
•
•
•
•
•
Understand the battery
1
Battery – Supplies power to the printer.
2
Battery release slider – Slides to release the battery.
Charge and use the battery
WARNING! Charge the battery for 4 hours before using the battery for the first
time. Because the battery is normally warm while it is charging, do not charge it in a
briefcase or other confined space as this might cause the battery to overheat.
NOTE: The AC adapter is normally warm to the touch when plugged into an AC
outlet.
NOTE: Bluetooth printing uses more battery power than wired printing. For
information on checking the battery charge level, see Install and use the battery.
To install the battery
NOTE: You can install the battery with the printer turned on or off.
Install and use the battery
19
Chapter 1
1.
Slide the battery into the battery slot at an angle, until the contacts on the battery
are flush with the contacts in the battery slot. The battery contact cover slides
open.
2.
3.
Push the battery into the battery slot until the battery clicks into place.
Plug in the AC adapter and turn on the printer. Allow the battery to charge for four
hours before using the battery for the first time.
NOTE: After the first charge, the battery charge light is green when the
battery is charging, and turns off when the battery is fully charged.
4.
After the battery is fully charged, you can use the printer without connecting to the
AC power supply.
To remove the battery
Follow these instructions to remove the battery.
1.
2.
20
Slide the battery release slider in the direction of the arrow.
Remove the battery.
Get started
Connect a memory device or camera
Using the USB port on the back of the printer, you can connect a USB storage device.
You can also connect and print photos from a PictBridge-compatible camera. You can
also transfer files from the storage device to your computer.
For more information about supported memory devices, see Memory device
specifications.
This section covers the following topics:
•
•
•
To connect a storage device
To connect a PictBridge-compatible camera
To transfer photos to your computer
To connect a storage device
Insert the USB storage device into the USB port on the back of the printer.
NOTE: If your USB device does not fit into this port due to size limitations, or if the
connector on the device is shorter than 11 mm (0.43 in), you will need to purchase
a USB extension cable in order to use your device with this port. For more
information on supported USB devices, see Memory device specifications.
To connect a PictBridge-compatible camera
The printer supports standard PictBridge-compliant features. See your digital camera
documentation for more information about using its PictBridge features.
1.
2.
Connect the camera to the printer with the USB cable provided with the camera.
The printer and camera compare features, and the compatible features are
displayed on the camera.
Navigate through the camera menus to execute the desired photo-printing
features.
To transfer photos to your computer
NOTE: The printer driver lets your computer read memory devices inserted into
the printer as physical disk drives when you are connected with a USB cable. You
can then access your photo files and print them with the software of your choice.
1.
2.
Insert the memory device into the USB port on the back of the printer.
Press (Cancel button) to cancel direct printing from the card. If your computer
is connected to the printer with a USB cable, the card then appears as a drive in
Windows Explorer or on the Mac OS X desktop. You can then transfer the photo
files to another drive on the computer or open and print your photographs with the
software application of your choice.
Connect a memory device or camera
21
Chapter 1
Print from mobile phones
If you have a mobile phone that supports Bluetooth, you can purchase software that
allows you to print documents and photos from your phone.
NOTE: If you are using a mobile phone running Windows Mobile, you can use the
HP software CD to install the printing software.
For a list of mobile phones and printing software, as well as information about obtaining
the software, see Mobile phone printing information.
Maintain the printer
The printer does not require scheduled maintenance, except for replacing the ink
service module. For more information, see Replace the ink service module. You should
attempt, however, to keep the printer free of dust and debris. This cleaning keeps the
printer in peak condition and might also make the diagnosis of problems easier.
WARNING! Turn off the printer and unplug the power cord before cleaning the
printer. If using the optional battery, turn off the printer, unplug the power cord and
remove the battery before cleaning.
This section covers the following topics:
•
Clean the printer
Clean the printer
When you clean the printer, follow these guidelines:
•
Clean the outside of the printer with a soft cloth moistened with mild detergent
and water.
NOTE: Clean the printer only with water or water mixed with a mild
detergent. Using other cleaners or alcohol can damage the printer.
•
Clean the inside of the front access cover with a dry, lint-free cloth.
CAUTION: Be careful not to touch the rollers. Skin oils on the rollers can
cause print quality problems.
Turn off the printer
Turn off the printer by pressing the
(Power) button located on the printer. Wait until
the power light turns off before unplugging the power cord or turning off a power strip. If
you turn the printer off incorrectly, the print carriage might not return to the correct
position causing problems with the ink cartridges and print quality issues.
22
Get started
2
Print
Most print settings are automatically handled by the software application. Change the
settings manually only when you want to change print quality, print on specific types of
paper, or use special features. For more information about selecting the best print
media for your documents, see Media specifications .
This section contains the following topics:
•
•
•
•
•
•
•
Print documents
Print brochures
Print on envelopes
Print photos
Print on special and custom-size paper
Print borderless documents
Print on both sides (duplexing)
Print documents
NOTE: With certain types of paper, you can print on both sides of a sheet of paper
(called "two-sided printing" or "duplex printing"). For more information, see Print on
both sides (duplexing).
Follow the instructions for your operating system.
•
•
Print documents (Windows)
Print documents (Mac OS X)
Print documents (Windows)
1.
2.
3.
4.
5.
6.
Load paper in the tray. For more information, see Load media.
On the File menu in the software application, click Print.
Select the printer you want to print to.
To change settings, click the button that opens the Properties dialog box.
Depending on the software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
Click a type of print task in the Printing Shortcuts list. The preset default
settings for the shortcuts are displayed.
If you change any settings on the Printing Shortcuts tab, you can save your
custom settings as a new printing shortcut:
a.
Select the shortcut, and then click Save As.
b.
To delete a shortcut, select the shortcut, and then click Delete.
TIP: You can change more options for the print job by using the features
available on the other tabs in the dialog box.
7.
8.
Click OK.
Click Print or OK to begin printing.
Print
23
Chapter 2
Print documents (Mac OS X)
1.
2.
3.
4.
Load paper in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
Change the print settings for the option provided in the pop-up menus, as
appropriate for your project.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
Click Print to begin printing.
Print brochures
Follow the instructions for your operating system.
•
•
Print brochures (Windows)
Print brochures (Mac OS X)
Print brochures (Windows)
NOTE: To set print settings for all print jobs, make the changes in the HP software
provided with the printer. For more information on the HP software, see Printer
management tools.
1.
2.
3.
4.
5.
6.
Load paper in the tray. For more information, see Load media.
On the File menu in the software application, click Print.
Select the printer you want to use.
To change settings, click the button that opens the Properties dialog box.
Depending on the software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
Select a borderless size from the Size drop-down menu. Select a brochure type
from the Paper Type drop-down menu.
Change any other print settings.
TIP: You can change more options for the print job by using the features
available on the other tabs in the dialog box.
7.
Click Print to begin printing.
Print brochures (Mac OS X)
1.
2.
3.
24
Print
Load paper in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
4.
Select Paper Type/Quality or Printer Features from the pop-up menu (located
below the Orientation setting), and then select the following settings:
•
Paper Type: the appropriate brochure paper type
•
Quality:Normal or Best
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
Select any other print settings that you want, and then click Print to begin
printing.
Print on envelopes
When selecting envelopes, avoid envelopes that have a very slick finish, self-stick
adhesives, clasps, or windows. Also, avoid envelopes with thick, irregular, or curled
edges, or areas that are wrinkled, torn, or otherwise damaged.
Make sure the envelopes you load in the printer are tightly constructed and that the
folds are sharply creased.
NOTE: For more information about printing on envelopes, see the documentation
available with the software program you are using.
Follow the instructions for your operating system.
•
•
Print on envelopes (Windows)
Print on envelopes (Mac OS X)
Print on envelopes (Windows)
1.
2.
3.
4.
5.
6.
Load envelopes in the tray. For more information, see Load media.
On the File menu in the software application, click Print.
Select the printer you want to print to.
To change settings, click the button that opens the Properties dialog box.
Depending on the software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
On the Features tab, change the orientation to Landscape.
In the Basic Options area, from the Size drop-down list, select More. Then,
select the appropriate envelope type.
TIP: You can change more options for the print job by using the features
available on the other tabs in the dialog box.
7.
Click OK, and then click Print or OK to begin printing.
Print on envelopes (Mac OS X)
1.
2.
3.
Load envelopes in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
Print on envelopes
25
Chapter 2
4.
Select the appropriate envelope size in the Paper Size pop-up menu.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
6.
Select the appropriate Orientation option for the type of envelope you are using.
Select any other print settings that you want, and then click Print to begin
printing.
Print photos
Do not leave unused photo paper in the input tray. The paper might start to curl, which
could reduce the quality of the printout. Photo paper should be flat before printing.
Follow the instructions for your operating system.
•
•
Print photos on photo paper (Windows)
Print photos on photo paper (Mac OS X)
Print photos on photo paper (Windows)
1.
2.
3.
4.
5.
6.
Load paper in the tray. For more information, see Load media.
On the File menu in the software application, click Print.
Select the printer you want to use.
To change settings, click the button that opens the Properties dialog box.
Depending on the software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
If you want to print the photo in black and white, click the Features tab, and then
select Print in Grayscale from the Color options.
Click OK, and then click Print or OK to begin printing.
Print photos on photo paper (Mac OS X)
1.
2.
3.
4.
Load paper in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
Select Paper Type/Quality or Printer Features from the pop-up menu (located
below the Orientation setting), and then select the Paper Type and Quality
settings you want to use.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
26
Print
If necessary, click the disclosure triangle next to Color Options.
Select any other print settings that you want, and then click Print to begin
printing.
6.
7.
8.
To automatically fix the image by automatically focusing the image and
moderately adjusting image sharpness, use Photo Fix. To access Photo Fix,
select Basic from the Photo Fix pop-up menu.
-OrSelect HP Real Life Technologies from the Feature Sets pop-up menu, and
then select Basic from the Photo Fix pop-up menu
If you want to print the photo in black and white, click Grayscale from the Color
pop-up menu, and then select High Quality.
-OrSelect Color Options from theFeature Sets pop-up menu, and then select High
Quality from the Grayscal Mode pop-up menu.
The High Quality option uses all available colors to print the photo in grayscale.
This creates smooth and natural shades of gray.
Select any other print settings that you want, and then click Print to begin
printing.
Print on special and custom-size paper
If your application supports custom-size paper, set the size in the application before
printing the document. If not, set the size in the print driver. You might need to reformat
existing documents to print them correctly on custom-size paper.
Use only custom-size paper that is supported by the printer. For more information, see
Media specifications.
NOTE: With certain types of paper, you can print on both sides of a sheet of paper
(called "two-sided printing" or "duplex printing"). For more information, see Print on
both sides (duplexing).
Follow the instructions for your operating system.
•
Print on special or custom-size paper (Mac OS X)
Print on special or custom-size paper (Mac OS X)
NOTE: Before you can print on custom-size paper, you must set up the custom
size in the HP software provided with the printer. For instructions, see Set up
custom sizes (Mac OS X).
1.
2.
3.
Load the appropriate paper in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
Print on special and custom-size paper
27
Chapter 2
4.
Select Paper Handling from the pop-up menu (located below the Orientation
setting), and then, under Destination Paper Size, click Scale to fit paper size,
and then select the custom size.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
Select any other print settings that you want, and then click Print to begin
printing.
Change any other settings, and then click Print to begin printing.
Set up custom sizes (Mac OS X)
1.
2.
From the File menu in the software application, click Print.
Select Manage Custom Sizes in the Paper Size pop-up menu.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
3.
4.
5.
Click the + on the left side of the screen, double-click Untitled, and type a name
for the new, custom size.
In the Width and Height boxes, type the dimensions, and then set the margins, if
desired.
Click OK.
Print borderless documents
Borderless printing lets you print to the edges of certain photo media types and a range
of standard media sizes.
NOTE: You cannot print a borderless document if the paper type is set to Plain
paper.
NOTE: Before printing a borderless document, open the file in a software
application and assign the image size. Make sure the size corresponds to the
media size on which you are printing the image.
NOTE: Not all applications or media sizes support borderless printing.
Follow the instructions for your operating system.
•
•
Print borderless documents (Windows)
Print borderless documents (Mac OS X)
Print borderless documents (Windows)
1.
2.
3.
4.
5.
28
Print
Load paper in the tray. For more information, see Load media.
On the File menu in the software application, click Print.
Select the printer you want to print to.
To change settings, click the button that opens the Properties dialog box.
Depending on the software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
Click the Features tab.
6.
7.
8.
9.
In the Size list, click More, and then select the borderless size loaded in the tray.
If a borderless image can be printed on the specified size, the Borderless check
box is selected.
In the Paper type drop-down list, click More, and then select the appropriate
paper type.
Select the Borderless check box if it is not already checked.
If the borderless paper size and paper type are not compatible, the printer
software displays an alert and allows you to select a different type or size.
Click OK, and then click Print or OK to begin printing.
Print borderless documents (Mac OS X)
1.
2.
3.
4.
Load paper in the tray. For more information, see Load media.
From the File menu in the software application, click Print.
Make sure the printer you want to use is selected.
Select Paper Type/Quality or Printer Features from the pop-up menu (located
below the Orientation setting), and then select the following settings:
•
Paper Type: The appropriate paper type
•
Quality:Best or Maximum dpi
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
5.
6.
Select a borderless paper size from the Paper Size drop-down menu.
Select any other print settings that you want, and then click Print to begin
printing.
Print on both sides (duplexing)
You can print on both sides manually using the Windows printer software.
You can print on both sides of a sheet using a Mac by first printing the odd-numbered
pages, turning the pages over, and then printing the even-numbered pages.
•
•
To perform duplexing (Windows)
To perform duplexing (Mac OS X)
To perform duplexing (Windows)
1.
2.
3.
4.
5.
6.
7.
Load the appropriate media. See Guidelines for two-sided (duplex) printing and
Load media.
With a document open, on the File menu, click Print, and then click Properties.
Click the Features tab.
Select Manually from the two-sided printing drop-down list.
To automatically resize each page to match the document's onscreen layout,
ensure Preserve Layout is selected. Clearing this option might result in
unwanted page breaks.
Select or clear the Flip Pages Up check box to match the way you want the
binding. See the graphics in the print driver for examples.
Change any other desired settings and click OK.
Print on both sides (duplexing)
29
Chapter 2
8.
9.
10.
Print the document.
After the first side of the document is printed, follow the onscreen instructions and
reload the paper into the tray to complete printing.
After reloading the paper, click Continue in the onscreen instructions to continue
the print job.
To perform duplexing (Mac OS X)
1.
2.
3.
Load the appropriate media. For more information, see Guidelines for two-sided
(duplex) printing and Load media.
With a document open, click Print on the File menu.
From the drop-down list, select Paper Handling, click Odd Only from the Pages
to Print pop-up menu and then press Print.
NOTE: Click the blue disclosure triangle next to the Printer selection to
access these options.
4.
30
Print
Flip the paper over and then print the even-numbered pages.
3
Work with ink cartridges
To ensure the best print quality from the printer, you will need to perform some simple
maintenance procedures. This section provides guidelines for handling the ink
cartridges, instructions for replacing the ink cartridges, and aligning and cleaning the
printhead.
This section contains the following topics:
•
•
•
•
•
•
•
Information about ink cartridges
Check the estimated ink levels
Handle the ink cartridges
Replace the ink cartridges
Print with a single ink cartridge
Store printing supplies
Ink cartridge maintenance
Information about ink cartridges
The following tips help maintain HP ink cartridges and ensure consistent print quality.
•
If you need to replace an ink cartridge, wait until you have the new ink cartridge
available to install before removing the old cartridge.
CAUTION: Do not leave untaped ink cartridges outside of the product for an
extended period of time. This can result in damage to the ink cartridge.
•
•
•
•
•
Keep all ink cartridges in the original sealed packages until they are needed.
(Power) button located on the product.
Turn off the printer by pressing the
Wait until the power light turns off before unplugging the power cord or turning off
a power strip. If you improperly turn off the printer, the print carriage might not
return to the correct position causing problems with the ink cartridges and print
quality issues. For more information, see Turn off the printer.
Store ink cartridges at room temperature (15-35° C or 59-95° F).
You do not need to replace the cartridges until print quality becomes
unacceptable, but a significant decrease in print quality may be the result of one
or more depleted cartridges. Possible solutions include checking the estimated
ink levels remaining in the cartridges, and cleaning the ink cartridges. Cleaning
the ink cartridges uses some ink. For more information, see Clean the ink
cartridges.
Do not clean ink cartridges unnecessarily. This wastes ink and shortens the life of
the cartridges.
Work with ink cartridges
31
Chapter 3
•
•
Handle ink cartridges carefully. Dropping, jarring, or rough handling during
installation can cause temporary printing problems.
If you are transporting the product, do the following to prevent ink leaking from
the print carriage or other damage from occurring to the product:
◦
Make sure you turn off the product by pressing the
(Power) button.
◦
The print carriage should be parked on the right side in the service station.
Make sure you leave the ink cartridges installed.
Related topics
Check the estimated ink levels
•
Clean the ink cartridges
•
Check the estimated ink levels
You can check the estimated ink levels from Toolbox (Windows), HP Utility (Mac OS
X), or the Toolbox software for PDAs. For information about using these tools, see
Printer management tools. You can also print the Printer Status page to view this
information (see Understand the printer information pages).
NOTE: Ink level alerts and indicators provide estimates for planning purposes
only. When you receive a low-ink alert, consider having a replacement cartridge
available to avoid possible printing delays. You do not have to replace the
cartridges until the print quality is unacceptable.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge
that has been used in another printer, the ink level indicator might be inaccurate or
unavailable.
NOTE: Ink from the cartridges is used in the printing process in a number of
different ways, including in the initialization process, which prepares the product
and cartridges for printing, and in printhead servicing, which keeps print nozzles
clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge
after it is used. For more information, see www.hp.com/go/inkusage.
32
Work with ink cartridges
Handle the ink cartridges
Before you replace or clean an ink cartridge, you should know the part names and how
to handle the ink cartridges.
1
Copper-colored contacts
2
Plastic tape with pink pull tab (must be removed before installing)
3
Ink nozzles under tape
Hold the ink cartridges by their black plastic sides, with the label on top. Do not touch
the copper-colored contacts or the ink nozzles.
NOTE: Handle the ink cartridges carefully. Dropping or jarring cartridges can
cause temporary printing problems, or even permanent damage.
Replace the ink cartridges
Follow these instructions when the ink level is low.
NOTE: When the ink level for an ink cartridge is low, a message appears on the
display. You can also check the ink levels by using Toolbox (Windows), HP Utility
(Mac OS X) or the Toolbox software for PDAs. For more information about using
these tools, see Printer management tools.
NOTE: Ink from the cartridges is used in the printing process in a number of
different ways, including in the initialization process, which prepares the device and
cartridges for printing. In addition, some residual ink is left in the cartridge after it is
used. For more information see www.hp.com/go/inkusage.
Ink level warnings and indicators provide estimates for planning purposes only. When
you receive a low-ink warning message, consider having a replacement cartridge
Replace the ink cartridges
33
Chapter 3
available to avoid possible printing delays. You do not need to replace the ink
cartridges until print quality becomes unacceptable.
For more information about ordering ink cartridges for the device, see Order printing
supplies online.
To replace the ink cartridges
Use these instructions to replace an ink cartridge.
1.
2.
Remove the new ink cartridge from its package and then pull the colored tab to
remove the protective film from the cartridge.
1
Copper-colored contacts
2
Plastic tape with pink pull tab (must be removed before installing)
3
Ink nozzles under tape
With the printer turned on, open the front access cover. Wait for the carriage to
stop moving. This should take only a few seconds.
CAUTION: Only remove or install ink cartridges when the ink cartridge
carriage stops moving.
34
Work with ink cartridges
3.
Lift the ink cartridge latch open and gently remove the ink cartridge from its cradle
compartment.
4.
Insert the new ink cartridge into its cradle compartment at the same angle at
which you removed the old ink cartridge. Check the symbol on the latch against
the symbol on the ink cartridge to make sure you are inserting the correct ink
cartridge.
5.
Close the ink cartridge latch. If the cartridge is inserted correctly, closing the latch
gently pushes the cartridge into its cradle compartment. Press the latch to make
sure it is seated flat on the cartridge.
6.
Close the front access cover.
Replace the ink cartridges
35
Chapter 3
7.
Wait for the carriage to complete the ink cartridge initialization routine and return
to the home position at the left side of the printer before using the printer.
NOTE: Do not open the front access cover until the ink cartridge initialization
is complete.
8.
Align the ink cartridges. For more information, see Align the ink cartridges.
Print with a single ink cartridge
If one of the ink cartridges runs out of ink before you can replace it, you can still print
with a single ink cartridge.
Removed cartridge
Cartridges used
Output
Black
Prints with only the tri-color ink
cartridge
Color and grayscale
Tri-color
Prints with only the black or photo ink
cartridge
All documents print in
grayscale
Photo
Prints with only the tri-color ink
cartridge
Color and grayscale
NOTE: Printing with one ink cartridge might be slower and the print quality might
be affected. It is recommended to print with both ink cartridges. For borderless
printing, the tri-color ink cartridge must be installed.
Store printing supplies
Ink cartridges can be left in the device for extended periods of time. However, to
assure optimal ink cartridge health, be sure to turn off the device properly. For more
information, see Turn off the printer.
Ink cartridge maintenance
This section contains the following topics:
•
•
•
Align the ink cartridges
Calibrate color
Clean the ink cartridges
Align the ink cartridges
Whenever you install a new ink cartridge, you should align the ink cartridges for the
best possible print quality. If the printout is grainy, has stray dots, jagged edges, or the
ink is bleeding into another color, you can realign them through Toolbox or print driver
(Windows), HP Utility (Mac OS X), or the Toolbox software for PDAs (Windows
Mobile). For information about using these tools, see Printer management tools.
36
Work with ink cartridges
NOTE: Load unused white paper into the paper tray before aligning the ink
cartridges. An alignment page is printed during the alignment process.
•
•
Toolbox (Windows): Open Toolbox. For more information, see Toolbox
(Windows). Click the Services tab, and then click Align the Print Cartridges
and follow the onscreen instructions.
HP Utility (Mac OS X): Open HP Utility. For more information, see HP Utility
(Mac OS X). Click Align and follow the onscreen instructions.
Calibrate color
If you are not satisfied with the appearance of colors, you can calibrate the colors
manually to ensure the best print quality.
NOTE: Calibrate the color only when the tri-color and photo ink cartridges are
installed together. The photo ink cartridge is available for purchase as an optional
accessory. For more information, see HP supplies and accessories.
TIP: If you are using a Windows Mobile device, you can calibrate the color using
the Toolbox software for PDAs. For more information, see Toolbox software for
PDAs (Microsoft Windows Mobile).
Color calibration balances color tints on printed pages. It is only necessary if:
•
•
Printed colors have visibly shifted toward yellow, cyan or magenta.
There is a color tinge in the gray shades.
Low ink levels in the ink cartridges might also produce incorrect colors.
•
•
Toolbox (Windows): Open Toolbox. For more information, see Toolbox
(Windows). Click the Services tab, and then click Calibrate Color and follow the
onscreen instructions.
HP Utility (Mac OS X): Open HP Utility. For more information, see HP Utility
(Mac OS X). Click Calibrate Color and follow the onscreen instructions.
Clean the ink cartridges
If printed characters are incomplete, or if dots or lines are missing from the printouts,
you might need to clean the ink cartridges. These are symptoms of clogged ink
nozzles, which can result from prolonged exposure to air.
NOTE: Before you clean the ink cartridges, make sure the ink cartridge ink levels
are not low. Low ink levels can also cause incomplete characters, missing lines, or
dots on the printouts. Check the ink cartridge lights to make sure they are not on.
For more information, see Control panel lights reference. You can also check the
status of the ink cartridges from the Printer Status tab in Toolbox (Windows), HP
Utility (Mac OS X), or Toolbox software for PDAs. Replace any low ink cartridges.
For more information, see Replace the ink cartridges.
This section contains the following topics:
•
To clean ink cartridges automatically
Ink cartridge maintenance
37
Chapter 3
To clean ink cartridges automatically
NOTE: Clean the ink cartridges only when print quality is poor. Cleaning uses ink
and shortens the life of the ink cartridges. There are three levels of cleaning
available. After one level of cleaning, perform the next level of cleaning only if the
results are not satisfactory.
Control panel
(Power button).
1.
Press and hold down
2.
While holding down the button, do one of the following. Perform the next level of
cleaning only if results from the previous level are not satisfactory.
a.
For level 1 cleaning: Press (Cancel button) twice.
b.
For level 2 cleaning: Press (Cancel button) twice and
(Resume
button) once.
c.
For level 3 cleaning: Press (Cancel button) twice and
(Resume
button) twice.
3.
Release
(Power button).
The printer begins the cleaning process.
Toolbox (Windows)
1.
Open Toolbox. For more information, see Toolbox (Windows).
2.
Click the Services tab, click Clean the Print Cartridges, and then follow the
onscreen instructions.
HP Utility (Mac OS X)
1.
Open HP Utility. For more information, see HP Utility (Mac OS X).
2.
Click Clean and follow the onscreen instructions.
38
Work with ink cartridges
4
Solve a problem
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
HP support
Troubleshooting tips and resources
Solve printing problems
Poor print quality and unexpected printouts
Advanced ink cartridge maintenance
Solve paper-feed problems
Troubleshoot installation issues
Understand the printer information pages
Clear jams
Control panel lights reference
HP support
If you have a problem, follow these steps
1.
Check the documentation that came with the printer.
2.
Visit the HP online support Web site at www.hp.com/go/customercare. HP online
support is available to all HP customers. It is the fastest source for up-to-date
printer information and expert assistance and includes the following features:
•
Fast access to qualified online support specialists
•
Software and driver updates for the HP printer
•
Valuable troubleshooting information for common problems
•
Proactive printer updates, support alerts, and HP newsgrams that are
available when you register the HP all-in-one
For more information, see Obtain electronic support.
3.
Call HP support. Support options and availability vary by printer, country/region,
and language. For more information, see HP support by phone.
Obtain electronic support
To find support and warranty information, go to the HP Web site at www.hp.com/go/
customercare. If prompted, select your country/region, and then click Contact HP for
information on calling for technical support.
This Web site also offers technical support, drivers, supplies, ordering information and
other options such as:
•
•
•
•
Access online support pages.
Send HP an email message for answers to your questions.
Connect with an HP technician by using online chat.
Check for HP software updates.
Solve a problem
39
Chapter 4
You can also obtain support from the HP software (Windows) or HP Utility (Mac OS X),
which provide easy, step-by-step solutions to common printing problems. For more
information, see Printer management tools or HP Utility (Mac OS X).
Support options and availability vary by printer, country/region, and language.
HP support by phone
The phone support numbers and associated costs listed here are those in effect at time
of publication and are applicable only for calls made on a land line. Different rates
might apply for mobile phones.
For the most current HP list of telephone support numbers and call costs information,
see www.hp.com/go/customercare.
During the warranty period, you can obtain assistance from the HP Customer Care
Center.
NOTE: HP does not provide telephone support for Linux printing. All support is
provided online at the following web site: https://launchpad.net/hplip. Click the Ask
a question button to begin the support process.
The HPLIP Web site does not provide support for Windows or Mac OS X. If you are
using these operating systems, see www.hp.com/go/customercare.
This section contains the following topics:
•
•
•
•
Before you call
Phone support period
Telephone support numbers
After the phone support period
Before you call
Call HP support while you are in front of the computer and the HP All-in-One. Be
prepared to provide the following information:
•
•
•
•
Model number (for more information, see Finding the printer model number)
Serial number (located on the back or bottom of the printer)
Messages that appear when the situation occurs
Answers to these questions:
◦
Has this situation happened before?
◦
Can you re-create it?
◦
Did you add any new hardware or software to the computer at about the
time that this situation began?
◦
Did anything else occur prior to this situation (such as a thunderstorm, HP
All-in-One was moved, etc.)?
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin
America (including Mexico).
40
Solve a problem
Telephone support numbers
In many locations, HP provides toll free telephone support during the warranty period.
However, some of the support numbers might not be toll free.
HP support
41
Chapter 4
For the most current list of telephone support numbers, see www.hp.com/go/
customercare.
www.hp.com/support
$IULFD(QJOLVKVSHDNLQJ
$IULTXHIUDQFRSKRQH
$OJ«ULH
$UJHQWLQD%XHQRV$LUHV
$UJHQWLQD
$XVWUDOLD
$XVWUDOLDRXWRIZDUUDQW\
˜VWHUUHLFK
‫ﺍﻟﺠﺰﺍﺋﺮ‬
0DGDJDVFDU
0DJ\DURUV]£J
‫ﺍﻟﺒﺤﺮﻳﻦ‬
3HDN+RXUV೼P/RZ+RXUV
೼P
&HQWUDO$PHULFD7KH
&DULEEHDQ
&KLOH
Ё೑
Ё೑
&RORPELD%RJRW£
&RORPELD
&RVWD5LFD
ÎHVN£UHSXEOLND
+8)SHUFYH]HW«NHVWHOHIRQUD
3HDN+RXUV೼SP
/RZ+RXUV೼SP
%UDVLO6DR3DXOR
%UDVLO
&DQDGD
KS
LQYHQW
ZZZKSFRPODVRSRUWH
0DOD\VLD
0DXULWLXV
0«[LFR&LXGDGGH0«[LFR 0«[LFR
0DURF
1HGHUODQG
೼0LQ
1HZ=HDODQG
1LJHULD
1RUJH
VWDUWHUS§.USHUPLQ
GHUHWWHU.USHUPLQ
)UDPRELOWHOHIRQJMHOGHU
PRELOWHOHIRQWDNVWHU
3DQDP£
3DUDJXD\
3HU¼
3KLOLSSLQHV
3ROVND
3RUWXJDO
2SNDOGNUSUPLQ
3UPLQPDQOºU
3UPLQºYULJHWLGVSXQNWHU
(FXDGRU$QGLQDWHO
(FXDGRU3DFLILWHO
℡
℡
)UDQFH
೼SP
'HXWVFKODQG
˃˨˨˙ˡ˞
ˈ˺˭ˮˬ˯
*XDWHPDOD
佭␃⡍߹㸠ᬓऔ
,QGLD
,QGLD
,QGRQHVLD
೼0LQDXVGHPGHXWVFKHQ
)HVWQHW]EHL$QUXIHQDXV
0RELOIXQNQHW]HQN¸QQHQDQGHUH
3UHLVHJHOWHQ
‫ﺍﻟﻴﻤﻦ‬
FRVWRWHOHIRQLFRORFDOH
-DPDLFD
㡴㦻
42
Solve a problem
&+)PLQ
㟎☷
&DOOVFRVW&RVWFHQWSHDN
FHQWRIISHDNSHUPLQXWH
,WDOLD
‫ﺍﻟﺴﻌﻮﺑﻴﺔ‬
NUPLQ
‫ﺍﻟﻌﺮﺍﻕ‬
‫ﺍﻟﻜﻮﻳﺖ‬
‫ﻟﺒﻨﺎﻥ‬
‫ﻗﻄﺮ‬
,UHODQG
&XVWRF¬QWLPRVQRSULPHLUR
PLQXWRHF¬QWLPRVUHVWDQWHV
PLQXWRV
̷͕͘͘͏̳͕͉͇ͦ͑͘
̷͕͘͘͏̸̶͇͔͙͙͈͚ͦ͑͌͌͗͗͊ 6LQJDSRUH
6ORYHQVN£UHSXEOLND
6RXWK$IULFD56$
6XRPL
6YHULJH
6ZLW]HUODQG
3XHUWR5LFR
5HS¼EOLFD'RPLQLFDQD
5HXQLRQ
5RP¤QLD
‫ﻣﺼﺮ‬
(O6DOYDGRU
(VSD³D
‫ُﻋﻤﺎﻥ‬
.RV]WSRĄÇF]HQLD]WHO
VWDFMRQDUQHJRMDN]DLPSXOVZJ
WDU\I\RSHUDWRUD]WHO
NRPµUNRZHJRZJWDU\I\RSHUDWRUD
&=1PLQ
'DQPDUN
೼0LQ
%HOJLTXH
‫ﺍﻷﺭﺩﻥ‬
೼PLQ
/X[HPEXUJ'HXWVFK
GRSSHOWHU2UWVWDULI
%HOJL­
뼑霢
/X[HPERXUJ)UDQ©DLV
ࡷࡎ࡙
‫ܡ‬䊏
7ULQLGDG7REDJR
7XQLVLH
7¾UNL\HòVWDQEXO$QNDUD
ò]PLU%XUVD
̺͇͔͇͑͗ͭ
8QLWHG.LQJGRP
‫ﺗﻮﻧﺲ‬
<HUHOQXPDUD
‫ﺍﻹﻣﺎﺭﺍﺕ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﻤﺘﺤﺪﺓ‬
8QLWHG6WDWHV
8UXJXD\
9HQH]XHOD&DUDFDV
9HQH]XHOD
9L¬W1DP
eSP
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help
might also be available at the HP online support Web site: www.hp.com/go/
customercare. Contact your HP dealer or call the support phone number for your
country/region to learn more about support options.
Troubleshooting tips and resources
Use the following tips and resources to resolve printing problems.
•
•
•
•
•
•
•
•
•
•
•
•
•
For a paper jam, see Clear jams.
For paper-feed problems, such as the paper skew and paper pick, see Solve
paper-feed problems.
Make sure the printer is in the ready state. If lights are on or blinking, see Control
panel lights reference.
Power cord and other cables are working, and are firmly connected to the printer.
Make sure the cable is connected firmly to a functioning alternating current (AC)
power outlet, and the printer is turned on. For voltage requirements, see Electrical
requirements.
Media is loaded correctly in the tray and is not jammed in the printer.
Ink cartridges are installed correctly in their correct slots. Press the latch to make
sure it is seated flat on the cartridge. Ensure you have removed the protective
tape from each ink cartridge.
All covers are closed.
All packing tapes and materials are removed.
The printer can print a self-test diagnostic page. For more information, see
Understand the printer information pages.
The printer is set as the current or default printer. For Windows, set it as the
default in the Printers folder. For Mac OS X, set it as the default in Print & Fax.
See the computer's documentation for more information.
Pause Printing is not selected if you are using a computer running Windows.
You are not running too many programs when you are performing a task. Close
programs that you are not using or restart the computer before attempting the
task again.
Any necessary software is installed in the host device if using a Bluetooth
connection. Make sure the Bluetooth settings are correct. For more information,
see Set up the printer for Bluetooth communication.
Some problems can be resolved by resetting the printer.
Solve printing problems
This section contains the following topics:
•
•
•
•
The printer shuts down unexpectedly
All printer lights are on or flashing
The printer is not responding (nothing prints)
Printer does not accept ink cartridge
Solve printing problems
43
Chapter 4
•
•
•
•
Printer takes a long time to print
Blank or partial page printed
Something on the page is missing or incorrect
Placement of the text or graphics is wrong
The printer shuts down unexpectedly
Check the power and power connections
•
Make sure the power cord is connected firmly to a functioning alternating current
(AC) power outlet. For voltage requirements, see Electrical requirements.
•
If you are using the battery, make sure it is installed correctly.
All printer lights are on or flashing
A non-recoverable error has occurred
Disconnect all cables (such as power cord, network cable, and USB cable), remove the
battery, wait about 20 seconds, reconnect the cables and battery, and then press any
control panel button. If the problem persists, visit the HP Web site (www.hp.com/go/
customercare) for the latest troubleshooting information, or printer fixes and updates.
The printer is not responding (nothing prints)
Check the print queue
A print job might be stuck in the print queue. To fix, open the print queue, cancel the
printing of all documents in the queue, and then reboot the computer. After the
computer reboots, try printing again. See the operating system help for information on
opening the print queue and canceling print jobs.
Check the printer setup
For more information, see Troubleshooting tips and resources.
Check the printer software installation
If the printer is turned off when printing, an alert message should appear on the
computer screen; otherwise, the printer software might not be installed correctly. To
resolve this, uninstall the software completely, and then reinstall the printer software.
For more information, see Uninstall and reinstall the HP software.
Check the cable connections
Make sure both ends of the USB cable are secure.
Check any personal firewall software installed on the computer
The personal software firewall is a security program that protects a computer from
intrusion. However, the firewall might block communication between the computer and
the printer. If there is a problem communicating with the printer, try temporarily
44
Solve a problem
disabling the firewall. If the problem persists, the firewall is not the source of the
communication problem. Re-enable the firewall.
If disabling the firewall allows you to communicate with the printer, you might want to
assign a static IP address to the printer and re-enable the firewall.
Check the Bluetooth wireless connection
Printing larger files using a Bluetooth wireless connection can sometimes cause the
print job to fail. Try printing a smaller file. For more information, see Problems setting
up Bluetooth wireless communication.
Printer does not accept ink cartridge
Check the ink cartridge
•
Remove and reinstall the ink cartridge.
•
Make sure the ink cartridge is inserted into its correct slot. Make sure the
protective tape has been completely removed from the ink cartridge. For more
information, see Replace the ink cartridges.
Clean the ink cartridge manually
Complete the ink cartridge cleaning procedure. For more information, see Advanced
ink cartridge maintenance.
Turn off the printer after removing the ink cartridge
After removing the ink cartridge, turn off the printer, wait about 20 seconds, and turn it
on again without the ink cartridge installed. After the printer has restarted, reinsert the
ink cartridge.
Printer takes a long time to print
Check the system resources
•
Make sure the computer has enough resources to print the document in a
reasonable amount of time. If the computer meets only the minimum system
requirements, documents might take longer to print. For more information on
minimum and recommended system requirements, see System requirements.
•
If the computer is too busy running other programs, documents can print more
slowly. Try closing some programs, and then print the document again.
Check the printer software settings
Print speed is slower when Best or Maximum dpi is selected as the print quality. To
increase the print speed, select different print settings in the print driver. For more
information, see Print.
Check for radio interference
If the printer is connected using Bluetooth wireless communication and is printing
slowly, then the radio signal might be weak. For more information, see Problems
setting up Bluetooth wireless communication.
Solve printing problems
45
Chapter 4
Check the Bluetooth wireless connection
Printing larger files using a Bluetooth wireless connection can sometimes cause the
print job to fail. Try printing a smaller file. For more information, see Problems setting
up Bluetooth wireless communication.
Blank or partial page printed
Clean the ink cartridge
Complete the ink cartridge cleaning procedure. For more information, see Clean the ink
cartridges.
Check the media settings
•
Make sure you select the correct print quality settings in the print driver for the
media loaded in the trays.
•
Make sure the page settings in the print driver match the page size of media
loaded in the tray.
Check the Bluetooth wireless connection
Printing larger files using a Bluetooth wireless connection can sometimes cause the
print job to fail. Try printing a smaller file. For more information, see Problems setting
up Bluetooth wireless communication.
More than one page feeds through the printer
For more information on paper-feed problems, see Solve paper-feed problems.
There is a blank page in the file
Check the file to make sure there is no blank page.
Something on the page is missing or incorrect
Check the ink cartridges
•
Check to make sure that both cartridges are installed and functioning correctly.
•
Ink cartridges might be very low on ink. For more information, see Clean the ink
cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. For more
information, see Replace the ink cartridges.
Check the margin settings
Make sure the margin settings for the document do not exceed the printable area of the
printer. For more information, see Set minimum margins.
Check the color print settings
Make sure Print in Grayscale is not selected in the print driver. Open the printer
Properties dialog box, click the Features tab, and then make sure that Print in
Grayscale is not selected in the Color options.
46
Solve a problem
Check the printer location and length of USB cable
High electromagnetic fields (such as those generated by monitors, motors, fans, TVs,
and other such devices) can sometimes cause slight distortions to printouts. Move the
printer away from the source of the electromagnetic fields. Also, it is recommended that
you use a USB cable that is less than 3 meters (9.8 feet) long to minimize the effects of
these electromagnetic fields.
Check the PictBridge settings
If printing using a PictBridge device, make sure the media settings in the printer are
correct or are defaulting to the current printer settings. To check the current printer
settings, see Understand the printer information pages.
Check the borderless print settings
If printing using a PictBridge device, make sure the media settings in the printer are
correct or are defaulting to the current printer settings. To check the current printer
settings, see Understand the printer information pages.
Check the Bluetooth wireless connection
Printing larger files using a Bluetooth wireless connection can sometimes cause the
print job to fail. Try printing a smaller file. For more information, see Problems setting
up Bluetooth wireless communication.
Check the mobile phone font
Boxes might appear when trying to print Asian fonts from a mobile phone on devices
purchased outside Asia. Asian fonts for Bluetooth mobile phone printing are supported
only by models purchased in Asia.
Placement of the text or graphics is wrong
Check how the media is loaded
Make sure the media width and length guides fit snugly against the edges of the stack
of media, and make sure the trays are not overloaded. For more information, see Load
media.
Check the media size
•
Content on a page might be cut off if the document size is larger than the media
that you are using.
•
Make sure the media size selected in the print driver match the size of media
loaded in the tray.
Check the margin settings
If the text or graphics are cut off at the edges of the page, make sure the margin
settings for the document do not exceed the printable area of the printer. For more
information, see Set minimum margins.
Solve printing problems
47
Chapter 4
Check the page-orientation setting
Make sure the media size and page orientation selected in the application match the
settings in the print driver. For more information, see Print.
Check the printer location and length of USB cable
High electromagnetic fields (such as those generated by monitors, motors, fans, TVs,
and other such devices) can sometimes cause slight distortions to printouts. Move the
printer away from the source of the electromagnetic fields. Also, it is recommended that
you use a USB cable that is less than 3 meters (9.8 feet) long to minimize the effects of
these electromagnetic fields.
If the above solutions do not work, the problem might be caused by the inability of the
application to interpret print settings correctly. See the release notes for known
software conflicts, refer to the application's documentation, or contact the software
manufacturer for specific help.
Poor print quality and unexpected printouts
This section covers the following topics:
•
•
•
•
•
•
•
•
•
•
General tips
Meaningless characters print
Ink is smearing
Ink is not filling the text or graphics completely
Output is faded or dull colored
Colors are printing as black and white
Wrong colors are printing
Printout shows bleeding colors
Colors do not line up correctly
Streaks or lines in printouts
General tips
Check the ink cartridges
•
Check to make sure that both cartridges are installed and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Whenever you install a new ink cartridge, you should align the ink cartridges for
the best possible print quality. If the printout is grainy, has stray dots, jagged
edges, or the ink is bleeding into another color, you can realign them through the
Toolbox or print driver (Windows), HP Utility (Mac OS X), or the Toolbox software
for PDAs (Windows Mobile). For more information, see Align the ink cartridges.
•
Dropping or subjecting the ink cartridges to impact might cause temporary print
quality problems. To resolve this problem, leave the ink cartridge in the printer for
2 to 24 hours.
48
Solve a problem
•
•
Use the appropriate ink cartridge for the project. For best results, use the HP
black ink cartridge to print text documents and use the HP photo or gray photo ink
cartridges to print color or black and white photos.
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Check the paper quality
The paper might be too moist or too rough. Make sure the media meets HP
specifications, and try to print again. For more information, see Media specifications.
Check the type of media loaded in the printer
•
Make sure the tray supports the type of media you have loaded. For more
information, see Media specifications.
•
Make sure you have selected the tray in the print driver that contains the media
that you want to use.
Check the rollers in the printer
The rollers in the printer might be dirty, causing lines or smudges to appear on the
printout. Turn off the printer, remove the battery, and then disconnect the power cord.
Clean the output rollers in the printer with a lint-free cloth lightly dampened with water,
and then try to print again.
Check the printer location and length of USB cable
High electromagnetic fields (such as those generated by monitors, motors, fans, TVs,
and other such devices) can sometimes cause slight distortions to printouts. Move the
printer away from the source of the electromagnetic fields. Also, it is recommended that
you use a USB cable that is less than 3 meters (9.8 feet) long to minimize the effects of
these electromagnetic fields.
Check the Bluetooth wireless connection
Printing larger files using a Bluetooth wireless connection can sometimes cause the
print job to fail. Try printing a smaller file. For more information, see Problems setting
up Bluetooth wireless communication.
Meaningless characters print
If an interruption occurs to a job that is printing, the printer might not recognize the rest
of the job.
Poor print quality and unexpected printouts
49
Chapter 4
Cancel the print job and wait for the printer to return to the ready state. If the printer
does not return to the ready state, cancel all jobs and wait again. When the printer is
ready, resend the job. If prompted by the computer to retry the job, click Cancel.
Check the cable connections
If the printer and computer are connected with a USB cable, the problem might be due
to a poor cable connection.
Make sure the cable connections at both ends are secure. If the problem persists, turn
off the printer, disconnect the cable from the printer, turn on the printer without
connecting the cable, and delete any remaining jobs from the print spooler. When the
Power light is on and not flashing, reconnect the cable.
Check the document file
The document file might be damaged. If you can print other documents from the same
application, try printing a backup copy of the document, if available.
Check the mobile phone font
Boxes might appear when trying to print Asian fonts from a mobile phone on printers
purchased outside Asia. Asian fonts for Bluetooth mobile phone printing are supported
only by models purchased in Asia.
Ink is smearing
Check the print settings
•
When you print documents that use a lot of ink or less adsorbent media, allow
more time to dry before handling the printouts. In the print driver, select the Best
print quality, and also increase the ink drying time and reduce the ink saturation
using the ink volume under the advanced features (Windows) or ink features
(Mac OS X). However, note that decreasing ink saturation might give printouts a
"washed-out" quality.
•
Color documents that have rich, blended colors can wrinkle or smear when
printed using the Best print quality. Try using another print mode, such as
Normal, to reduce ink, or use HP Premium Paper designed for printing vivid color
documents. For more information, see Print.
Check the media size and type
•
Do not allow the printer to print media that is smaller than the print job. If you are
doing borderless printing, make sure the correct media size is loaded. If you are
using the incorrect size, ink smears might appear on the bottom of subsequent
pages.
•
Some types of media do not accept ink well. For these types of media, ink dries
more slowly and smearing might occur. For more information, see Media
specifications.
Check the ink service module
Remove the ink service module and check to see if it is full. If it is not full, reinstall the
module. If it is full, replace it with a new one. For information on removing and
replacing the ink service module, see Replace the ink service module.
50
Solve a problem
Clean the ink cartridges
Ink cartridges might need to be cleaned. For more information, see Clean the ink
cartridges.
Ink is not filling the text or graphics completely
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Check the media type
Some media types are not suitable for use with the printer. For more information, see
Media specifications.
Output is faded or dull colored
Check the print mode
The Draft or Fast mode in the print driver allows you to print at a faster rate, which is
good for printing drafts. To get better results, select Normal or Best. For more
information, see Print.
Check the paper type setting
When printing on special media, select the corresponding media type in the print driver.
For more information, see Print on special and custom-size paper.
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Poor print quality and unexpected printouts
51
Chapter 4
Colors are printing as black and white
Check the print settings
Make sure Print in Grayscale is not selected in the print driver. Open the printer
Properties dialog box, click the Features tab, and then make sure that Print in
Grayscale is not selected in the Color options.
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Wrong colors are printing
Check the print settings
Make sure Print in Grayscale is not selected in the print driver. Open the printer
Properties dialog box, click the Features tab, and then make sure that Print in
Grayscale is not selected in the Color options.
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Printout shows bleeding colors
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
52
Solve a problem
•
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Check the media type
Some media types are not suitable for use with the printer. For more information, see
Media specifications.
Colors do not line up correctly
Check the ink cartridges
•
Check to make sure that both the black and tri-color ink cartridges are installed
and functioning correctly.
•
Ink cartridges might need to be cleaned. See Clean the ink cartridges.
•
Ink cartridges might be very low on ink. Replace any low cartridges. Try removing
and reinstalling the cartridges, making sure they snap firmly into place. For more
information, see Replace the ink cartridges.
•
Whenever you install a new ink cartridge, you should align the ink cartridges for
the best possible print quality. If the printout is grainy, has stray dots, jagged
edges, or the ink is bleeding into another color, you can realign them through the
Toolbox or print driver (Windows), HP Utility (Mac OS X), or the Toolbox software
for PDAs (Windows Mobile). For more information, see Align the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Check the graphics placement
Use the zoom or print preview feature of the printer software to check for gaps in the
placement of graphics on the page.
Streaks or lines in printouts
Check the print mode
Try using the Best mode in the print driver. For more information, see Print.
Poor print quality and unexpected printouts
53
Chapter 4
Check the ink cartridges
•
Clean the ink cartridges. For more information, see Clean the ink cartridges.
•
Whenever you install a new ink cartridge, you should align the ink cartridges for
the best possible print quality. If the printout is grainy, has stray dots, jagged
edges, or the ink is bleeding into another color, you can realign them through the
Toolbox or print driver (Windows), HP Utility (Mac OS X), or the Toolbox software
for PDAs (Windows Mobile). For more information, see Align the ink cartridges.
•
Make sure ink cartridges have not been tampered with. Refilling processes and
the use of incompatible inks can disrupt the intricate printing system and result in
reduced print quality and damage to the printer or ink cartridge. HP does not
guarantee or support refilled ink cartridges. For ordering information, see HP
supplies and accessories.
Advanced ink cartridge maintenance
This section contains the following topics:
•
•
•
Clean the ink cartridge contacts
Clean the area around the ink nozzles
Replace the ink service module
Clean the ink cartridge contacts
Before cleaning the ink cartridge contacts, remove the ink cartridge and verify that
nothing is covering the ink cartridge contacts, then reinstall the ink cartridge.
Make sure you have the following materials available:
•
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come
apart or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning ink cartridges.
•
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the ink cartridges).
CAUTION: Do not use platen cleaners or alcohol to clean the ink cartridge
contacts. These can damage the ink cartridge or the printer.
To clean the ink cartridge contacts
1.
Turn on the device and open the front access cover.
The print carriage moves to the center of the printer.
2.
Wait until the print carriage is idle and silent, and then unplug the power cord
from the back of the device.
3.
Lift the ink cartridge latch open and gently remove the ink cartridge from its cradle
compartment.
4.
Inspect the ink cartridge contacts for ink and debris buildup.
5.
Dip a clean foam rubber swab or lint-free cloth into distilled water, and squeeze
any excess water from it.
6.
Hold the ink cartridge by its sides.
54
Solve a problem
7.
8.
9.
10.
11.
12.
Clean only the copper-colored contacts. Allow the ink cartridges to dry for
approximately ten minutes.
1
Copper-colored contacts
2
Ink nozzles (do not clean)
Insert the ink cartridge into its cradle compartment at the same angle at which
you removed the old ink cartridge.
Close the ink cartridge latch. If the cartridge is inserted correctly, closing the latch
gently pushes the cartridge into its cradle compartment. Press the latch to make
sure it is seated flat on the cartridge.
Repeat if necessary for the other ink cartridge.
Close the front access cover and plug the power cord into the back of the device.
Wait for the carriage to complete the ink cartridge initialization routine and return
to the home position at the left side of the printer before using the printer.
NOTE: Do not open the front access cover until the ink cartridge initialization
is complete.
13.
Align the ink cartridges. For more information, see Align the ink cartridges.
Clean the area around the ink nozzles
If the printer is used in a dusty environment, a small amount of debris might
accumulate inside the printer. This debris can include dust, hair, carpet, or clothing
fibers. When debris gets on the ink cartridges, it can cause ink streaks and smudges
on printed pages. Ink streaking can be corrected by cleaning around the ink nozzles as
described here.
NOTE: Clean the area around the ink nozzles only if you continue to see streaks
and smudges on your printed pages after you have already cleaned the ink
cartridges by using the software you installed with the printer. For more information,
see Clean the ink cartridges.
Advanced ink cartridge maintenance
55
Chapter 4
Make sure you have the following materials available:
•
Dry foam rubber swabs, lint-free cloth, or any soft material that will not come
apart or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning ink cartridges.
•
Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the ink cartridges).
CAUTION: Do not touch the copper-colored contacts or ink nozzles.
Touching these parts can result in clogs, ink failure, and bad electrical
connections.
To clean the area around the ink nozzles
1.
Turn on the printer and open the front access cover.
The print carriage moves to the center of the printer.
2.
Wait until the print carriage is idle and silent, and then unplug the power cord
from the back of the device.
3.
Lift the ink cartridge latch open and gently remove the ink cartridge from its cradle
compartment.
NOTE: Do not remove both ink cartridges at the same time. Remove and
clean each ink cartridge one at a time. Do not leave an ink cartridge outside
the printer for more than 30 minutes.
4.
5.
6.
Place the ink cartridge on a piece of paper with the ink nozzles facing up.
Lightly moisten a clean foam rubber swab with distilled water, and squeeze any
excess water from it.
Clean the face and edges around the ink nozzle area with the swab, as shown
below.
1
Nozzle plate (do not clean)
2
Face and edges around the ink nozzle area
CAUTION: Do not clean the nozzle plate.
7.
56
Insert the ink cartridge into its cradle compartment at the same angle at which
you removed the old ink cartridge.
Solve a problem
8.
9.
10.
11.
Close the ink cartridge latch. If the cartridge is inserted correctly, closing the latch
gently pushes the cartridge into its cradle compartment. Press the latch to make
sure it is seated flat on the cartridge.
Repeat if necessary for the other ink cartridge.
Close the front access cover and plug the power cord into the back of the device.
Wait for the carriage to complete the ink cartridge initialization routine and return
to the home position at the left side of the printer before using the printer.
NOTE: Do not open the front access cover until the ink cartridge initialization
is complete.
12.
Align the ink cartridges. For more information, see Align the ink cartridges.
Replace the ink service module
The replaceable ink service module holds waste ink from the black ink cartridge. When
the ink service module is almost full, the printer lights prompt you to replace it. For
more information, see Control panel lights reference. When you are notified by the
control panel that the ink service module is full, contact HP support to obtain a new
module. For more information, see HP support. If you have a new ink service module,
install it immediately by following the instructions that came with the module.
TIP: When the ink service module is full, the printer stops printing. However, until
the replacement arrives, you can continue printing by removing the black ink
cartridge and printing with just the tri-color ink cartridge. Color results and print
speeds, though, might be affected. For more information about printing with a
single ink cartridges, see Print with a single ink cartridge.
CAUTION: Allowing the ink service module to fill completely can result in black ink
spillage. Take care to avoid spilling the ink in the ink service module. Ink can
permanently stain fabric and other materials.
Solve paper-feed problems
For information on resolving jams, see Clear jams.
This section contains the following topics:
•
•
•
•
•
Media is not supported for the printer
Media is not picked up
Media is not coming out correctly
Pages are skewing
Multiple pages are being picked up
Media is not supported for the printer
Use only media that is supported for the printer and the tray being used. For more
information, see Media specifications.
Solve paper-feed problems
57
Chapter 4
Media is not picked up
•
•
•
•
Make sure media is loaded in the tray. For more information, see Load media.
Fan the media before loading.
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
Make sure media in the tray is not curled. Uncurl paper by bending it in the
opposite direction of the curl.
Make sure to fully extend the input tray extension if your printer model has an
extension.
Media is not coming out correctly
Remove excess media from the output area. If printed media stacks up outside the
output slot, it can prevent media from coming out of the printer correctly.
Pages are skewing
•
•
•
Make sure the media loaded in the trays is aligned to the paper guides.
Load media into the printer only when it is not printing.
Make sure to fully extend the input tray extension if your printer model has an
extension.
Multiple pages are being picked up
•
•
•
•
Fan the media before loading.
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
Make sure the tray is not overloaded with paper.
Use HP media for optimum performance and efficiency.
Troubleshoot installation issues
If the following topics do not help, see HP support for information about HP support.
•
•
•
Hardware installation suggestions
Software installation suggestions
Problems setting up Bluetooth wireless communication
Hardware installation suggestions
Check the printer
•
Make sure that all packing tape and material have been removed from outside
and inside the printer.
•
Make sure that the printer is loaded with paper.
58
Solve a problem
•
•
Make sure that no lights are on or blinking except the Power light, which should
be on. If a light other than the Power light is on or blinking, there is an error. For
more information, see Control panel lights reference.
Make sure that the printer can print a self-test diagnostic page.
Check the hardware connections
•
Make sure that any cords and cables that you are using are in good working
order.
•
Make sure that the power cord is connected securely to both the printer and to a
working power outlet.
Check the ink cartridges
•
Whenever you install a new ink cartridge, the printer aligns the ink cartridges
automatically. If the alignment fails, check to make sure the cartridges are
installed correctly, and start the ink cartridge alignment. For more information,
see Align the ink cartridges.
•
Make sure that all latches and covers are closed correctly.
Software installation suggestions
Check the computer system
•
Make sure that the computer is running one of the supported operating systems.
•
Make sure that the computer meets at least the minimum system requirements.
•
In the Windows device manager, make sure that the USB drivers have not been
disabled.
•
If you are using a computer running Windows, and the computer cannot detect
the printer, run the uninstallation utility (util\ccc\uninstall.bat on the Starter CD) to
perform a clean uninstallation of the print driver. Restart the computer, and
reinstall the print driver.
Verify installation preliminaries
•
Make sure to use the Starter CD that contains the correct installation software for
your operating system.
•
Before installing software, make sure that all other programs are closed.
•
If the computer does not recognize the path to the CD-ROM drive that you type,
make sure that you are specifying the correct drive letter.
•
If the computer cannot recognize the Starter CD in the CD-ROM drive, inspect
the Starter CD for damage. You can download the print driver from the HP Web
site (www.hp.com/go/customercare).
NOTE: After correcting any problems, run the installation program again.
Troubleshoot installation issues
59
Chapter 4
Problems setting up Bluetooth wireless communication
If you have problems printing using a Bluetooth wireless connection, try the following
suggestions. For more information on configuring wireless settings, see Set up the
printer for Bluetooth communication.
Windows
▲ Check the Bluetooth wireless settings. For more information, see Set up the
printer for Bluetooth communication.
Mac OS X
▲ Delete and re-add the printer in Print & Fax.
Check the Bluetooth settings
•
Check the Bluetooth settings. For more information, see Set up the printer for
Bluetooth communication.
•
To configure Bluetooth settings or monitor printer status (such as ink levels) using
the Toolbox (Windows), you must connect the printer to the computer with a USB
cable.
Check the Bluetooth wireless signal
Wireless communication can be interrupted or unavailable if there is signal
interference, distance or signal strength problems, or if the printer is not ready .
•
•
Make sure the printer is within range of the Bluetooth sending device. Bluetooth
printing allows wireless printing up to 10 meters (30 feet).
If a document doesn't print, there could be signal interruption. If a message
appears on the computer explaining that there is a signal problem, cancel the
print job and then resend it from the computer.
Understand the printer information pages
The printer information pages contain detailed printer information, including firmware
version number, serial number, service ID, print cartridge information, default page
settings, and printer media settings.
The Bluetooth configuration page contains Bluetooth connectivity information.
NOTE: The printer must not be processing any print jobs while you print the
configuration and diagnostic pages.
If you need to call HP, it is useful to print diagnostic and configuration pages before
calling.
60
Solve a problem
Print printer information pages from the control panel
You can print the following printer information pages from the control panel on the
printer, without being connected to the printer.
To print a diagnostic page
Press and hold (Cancel button) for three seconds.
Use the diagnostic page to view current printer settings, ink supply status, print
cartridge health, and to troubleshoot printer problems.
To print a configuration page
Press and hold
(Resume button) and (Bluetooth button) for three seconds.
Use the configuration page to view default page settings, printer media settings, and
LED state descriptions.
To print a Bluetooth configuration page
Press and hold (Bluetooth button) for three seconds.
Use the Bluetooth configuration page to view Bluetooth information such as Bluetooth
device name.
Print printer information pages from the software
You can print the following printer information pages from the printer software.
To print a test page from Toolbox (Windows)
1.
Open Toolbox. For more information, see Toolbox (Windows).
2.
Click the Services tab.
3.
Click Print a Configuration Page.
NOTE: If you are using a Windows Mobile device, you can use the Toolbox
software for PDAs. For more information, see Toolbox software for PDAs
(Microsoft Windows Mobile).
To print a configuration page from the print driver (Windows)
1.
Open the print driver.
2.
Click Properties.
3.
Click the Services tab.
4.
Click Print Configuration Page.
To print a test page from HP Utility (Mac OS X)
1.
Open HP Utility. See HP Utility (Mac OS X)
2.
On the Test panel, click Print Test Page.
Understand the printer information pages
61
Chapter 4
Clear jams
Occasionally, media becomes jammed during a job. Try the following remedies to
reduce jams.
•
•
•
Make sure that you are printing with media that meets specifications. For more
information, see Media specifications.
Make sure that you are printing with media that is not wrinkled, folded, or
damaged.
Make sure that the input tray is loaded correctly and is not too full. For more
information, see Load media.
This section contains the following topics:
•
•
Clear a jam in the printer
Tips for avoiding jams
Clear a jam in the printer
To clear a jam
Follow these instructions to clear a paper jam.
1.
2.
3.
Turn off the printer.
Unplug the printer from the power source.
Remove media that is not jammed from the input tray and the output slot.
NOTE: Do not put your hands inside the input tray. Use tweezers instead
and be careful not to scratch the inside of the printer.
4.
5.
Locate the media jam.
If the media is visible from the output slot, gently pull it out from the slot. If the
media is not visible, open the front access cover and clear jammed media.
NOTE: Remove jammed media slowly and steadily to prevent media tear.
62
Solve a problem
6.
If the print carriage is obstructing the jam, gently push it to one side and then
remove the media.
7.
If the jammed media is not visible in the print area inside the printer, remove what
is visible in the input tray.
After you clear the jam, close the front access cover, turn on the printer, and then
(Resume button) to continue the print job.
press
The printer continues the print job on the next page. Resend the page or pages
that were jammed in the printer.
8.
Tips for avoiding jams
•
•
•
•
•
•
•
•
Make sure that nothing is blocking the paper path.
Do not overload the trays. For more information, see Media specifications.
Load paper correctly and when the printer is not printing. For more information,
see Load media.
Do not use media that is curled or crumpled.
Always use media that conforms with specifications. For more information, see
Media specifications.
Make sure media is aligned against the right side of a tray.
Make sure the media guides are adjusted snugly against the media, but do not
crinkle or bend it.
Make sure to remove paper clips, staples, pins, or other attachments from the
paper.
Clear jams
63
Chapter 4
Control panel lights reference
For more information, visit the HP Web site (www.hp.com/go/customercare) for the
latest troubleshooting information, or printer fixes and updates.
Light description/Light pattern
Explanation and recommended action
Power light is on.
If using AC power: Printer is turned on and
idle.
If using battery power: Battery status light
indicates power level.
No action required.
Power light is slowly pulsing white.
Printer is in sleep mode.
No action is required.
Battery status light is green.
Battery is 41–100% charged and printer is
turned on and idle. Power cord not plugged
in.
No action is required.
Battery status light is amber.
Battery is 10-40% charged and printer is
turned on and idle. Power cord not plugged
in.
Plug in the power cord to begin recharging
the battery. See Install and use the battery.
Battery status light is red.
Battery is less than 10% charged and printer
is turned on and idle. Power cord not
plugged in.
Plug in the power cord to begin recharging
the battery. See Install and use the battery.
Battery status light is blinking red.
Battery is less than 2% charged and printer
is turned on and idle. Power cord not
plugged in.
Plug in the power cord to begin recharging
the battery. See Install and use the battery.
64
Solve a problem
(continued)
Light description/Light pattern
Explanation and recommended action
Battery charging light is amber; battery status
light is green, amber, or red.
Battery is charging. Battery status light
indicates charge level.
NOTE: When the battery is fully charged,
the battery charging light turns off.
No action required.
Battery charging light is red.
Power cord is plugged in and battery is
detected but faulty.
Replace the battery. See HP supplies and
accessories.
Power light blinks.
Printer is printing, turning on or off, or
waiting for ink to dry.
No action required.
Power light is on and Bluetooth light is blue.
Bluetooth wireless is turned on.
No action is required.
Power light is on and Resume light blinks.
Printer is paused either out of paper or
media width mismatch.
If out of paper, load paper. If media width
mismatch, load correct paper. After
appropriate action, press
(Resume
button) to continue the print job.
Resume and Power lights on.
Printer cover or door is open.
Close printer cover and doors.
Control panel lights reference
65
Chapter 4
(continued)
Light description/Light pattern
Explanation and recommended action
Right or left ink cartridge blinks and Power light
is on.
Borderless print error; missing or failed
cartridge; cartridge in wrong slot; missinstalled cartridge. Right or Left ink cartridge
lights indicate whether the problem is with
the Tri-color or Black/Photo ink cartridge.
Follow the instructions provided in the HP
software messages displayed on your
computer.
Right or left ink cartridge light blinks, Resume
light blinks, Power light is on.
Ink cartridge is very low or the cartridge is
counterfeit or previously used. Right or left
ink cartridge lights indicate whether the
problem is with the Tri-color or Black/Photo
ink cartridge.
Replace cartridge. For more information,
see Replace the ink cartridges.
If this cartridge was sold to you as a new,
original HP cartridge, it may be a counterfeit.
Contact the store where this cartridge was
purchased or visit HP at: www.hp.com/go/
anticounterfeit for more information or to
report suspected fraud.
Note:
HP's ink cartridge warranty does not
•
•
•
cover non-HP ink or non-HP
cartridges.
HP's printer warranty does not cover
repairs or service due to use of nonHP cartridges or non-HP ink.
HP does not guarantee the quality or
reliability of non-HP ink.
NOTE:
Information about ink levels will not be
available.
Right or left ink cartridge light is on, Power light
is on.
Ink cartridge is low on ink. Right or Left ink
cartridge lights indicate whether the problem
is with the Tri-color or Black/Photo ink
cartridge.
You can continue to print, but you need to
replace the cartridge soon. For more
information, see Replace the ink cartridges.
Right or left ink cartridge light blinks, Power light
blinks.
Tri-color or right ink cartridge needs
attention. Right or Left ink cartridge lights
indicate whether the problem is with the Tricolor or Black/Photo ink cartridge.
Reinstall the ink cartridge and try to print. If
the error persists, replace the cartridge. For
more information, see Replace the ink
cartridges.
66
Solve a problem
(continued)
Light description/Light pattern
Explanation and recommended action
Power light blinks, Resume light blinks.
Media jam or carriage stall.
Clear the jammed paper. For more
information, see Paper Jam. After clearing
the jam, press
(Resume button) to
continue the print job.
If no paper jam exists, press
(Resume
button). If this does not work, try turning the
printer off and then on again, and resend the
print job.
Power light is off, Resume light blinks.
An unsupported USB device is connected to
the printer.
Remove the USB device. For more
information on supported devices, see
Memory device specifications.
Power light is off, Resume light is on.
An unsupported hub is connected to the
printer.
Remove the hub. For more information on
supported devices, see Memory device
specifications.
Power light blinks, Resume light blinks. After
pressing and holding the (Cancel button) for
three seconds, the left and right ink cartridge
lights are on or blinking.
Service station stall. This can be caused by
several conditions, including:
•
•
Cartridge latches unsecured (left and
right cartridge lights on).
Paper jams.
Make sure all cartridge latches are secured
and no paper is jammed in the printer.
If no paper jam exists, press
(Resume
button). If this does not work, try turning the
printer off and then on again, and resend the
print job.
Power light blinks, Resume light blinks. After
pressing and holding the (Cancel button) for
Ink service module is almost full.
The replaceable ink service module holds
waste ink from the black ink cartridge. When
the ink service module is almost full, contact
HP support to obtain a new module. For
more information, see HP support.
If you have a new ink service module, install
it immediately by following the instructions
that came with the module.
For more information, see Replace the ink
service module.
Control panel lights reference
67
Chapter 4
(continued)
Light description/Light pattern
Explanation and recommended action
three seconds, the left ink cartridge light is on,
and right ink cartridge light is blinking.
Power light blinks, Resume light blinks. After
pressing and holding the (Cancel button) for
three seconds, the left and right ink cartridge
lights are blinking.
Ink service module is full.
The replaceable ink service module holds
waste ink from the black ink cartridge. The
ink service module is now full. The printer
will not be able to print with the black ink
cartridge until the ink service module is
replaced . Contact HP support to obtain a
new module. For more information, see HP
support.
If you have a new ink service module, install
it immediately by following the instructions
that came with the module.
TIP: When the ink service module is full,
the printer stops printing. However, until the
replacement arrives, you can continue
printing by removing the black ink cartridge
and printing with just the tri-color ink
cartridge. Color results and print speeds,
though, might be affected. For more
information about printing with a single ink
cartridges, see Print with a single ink
cartridge.
For more information, see Replace the ink
service module.
68
Solve a problem
A
Technical information
This section contains the following topics:
•
Warranty information
•
Printer specifications
•
Regulatory information
•
Environmental product stewardship program
•
Third-party licenses
Warranty information
This section contains the following topics:
•
Hewlett-Packard limited warranty statement
•
Ink cartridge warranty information
Technical information
69
Appendix A
Hewlett-Packard limited warranty statement
HP product
Duration of limited warranty
Software Media
90 days
Printer
1 year
Print or Ink cartridges
Until the HP ink is depleted or the “end of warranty” date printed
on the cartridge has been reached, whichever occurs first. This
warranty does not cover HP ink products that have been refilled,
remanufactured, refurbished, misused, or tampered with.
Printheads (only applies to products with customer
replaceable printheads)
1 year
Accessories
1 year unless otherwise stated
A. Extent of limited warranty
1. Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from defects
in materials and workmanship for the duration specified above, which duration begins on the date of purchase by the
customer.
2. For software products, HP’s limited warranty applies only to a failure to execute programming instructions. HP does not
warrant that the operation of any product will be interrupted or error free.
3. HP's limited warranty covers only those defects that arise as a result of normal use of the product, and does not cover
any other problems, including those that arise as a result of:
a. Improper maintenance or modification;
b. Software, media, parts, or supplies not provided or supported by HP;
c. Operation outside the product's specifications;
d. Unauthorized modification or misuse.
4. For HP printer products, the use of a non-HP cartridge or a refilled cartridge does not affect either the warranty to the
customer or any HP support contract with the customer. However, if printer failure or damage is attributable to the use of
a non-HP or refilled cartridge or an expired ink cartridge, HP will charge its standard time and materials charges to
service the printer for the particular failure or damage.
5. If HP receives, during the applicable warranty period, notice of a defect in any product which is covered by HP's
warranty, HP shall either repair or replace the product, at HP's option.
6. If HP is unable to repair or replace, as applicable, a defective product which is covered by HP's warranty, HP shall,
within a reasonable time after being notified of the defect, refund the purchase price for the product.
7. HP shall have no obligation to repair, replace, or refund until the customer returns the defective product to HP.
8. Any replacement product may be either new or like-new, provided that it has functionality at least equal to that of the
product being replaced.
9. HP products may contain remanufactured parts, components, or materials equivalent to new in performance.
10. HP's Limited Warranty Statement is valid in any country where the covered HP product is distributed by HP. Contracts
for additional warranty services, such as on-site service, may be available from any authorized HP service facility in
countries where the product is distributed by HP or by an authorized importer.
B. Limitations of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS MAKES ANY
OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE.
C. Limitations of liability
1. To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and
exclusive remedies.
2. TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN
THIS WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON
CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
D. Local law
1. This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary
from state to state in the United States, from province to province in Canada, and from country to country elsewhere in
the world.
2. To the extent that this Warranty Statement is inconsistent with local law, this Warranty Statement shall be deemed
modified to be consistent with such local law. Under such local law, certain disclaimers and limitations of this Warranty
Statement may not apply to the customer. For example, some states in the United States, as well as some governments
outside the United States (including provinces in Canada), may:
a. Preclude the disclaimers and limitations in this Warranty Statement from limiting the statutory rights of a consumer
(e.g., the United Kingdom);
b. Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or
c. Grant the customer additional warranty rights, specify the duration of implied warranties which the manufacturer
cannot disclaim, or allow limitations on the duration of implied warranties.
3. THE TERMS IN THIS WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT
EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS
APPLICABLE TO THE SALE OF THE HP PRODUCTS TO SUCH CUSTOMERS.
HP Limited Warranty
Dear Customer,
You will find below the name and address of the HP entity responsible for the performance of the HP Limited Warranty in your
country.
You may have additional statutory rights against the seller based on your purchase agreement. Those rights are not
in any way affected by this HP Limited Warranty.
Ireland: Hewlett-Packard Ireland Limited, 63-74 Sir John Rogerson's Quay, Dublin 2
United Kingdom: Hewlett-Packard Ltd, Cain Road, Bracknell, GB-Berks RG12 1HN
Malta: Hewlett-Packard International Trade B.V., Malta Branch, 48, Amery Street, Sliema SLM 1701, MALTA
South Africa: Hewlett-Packard South Africa Ltd, 12 Autumn Street, Rivonia, Sandton, 2128, Republic of South Africa
70
Technical information
Ink cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP printer.
This warranty does not cover HP ink products that have been refilled, remanufactured,
refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the
end of warranty date has not been reached. The end of warranty date, in YYYY/MM format, can
be found on the product as indicated:
Warranty information
71
Appendix A
Printer specifications
This section contains the following topics:
•
Physical specifications
•
•
Printer features and capacities
Processor and memory specifications
•
System requirements
•
•
Memory device specifications
Mobile phone printing information
•
Media specifications
•
•
Print resolution
Operating environment
•
Electrical requirements
•
Acoustic emission specification
Physical specifications
Size (width x depth x height)
•
Printer: 347.9 x 175.5 x 84.4 mm (13.70 x 6.91 x 3.32 inches)
•
Printer with battery: 347.9 x 197.5 x 84.4 mm (13.70 x 7.78 x 3.32 inches)
Weight (does not include printing supplies)
•
Printer: 2.3 kg (5.1 lb)
•
Printer with battery: 2.5 kg (5.5 lb)
Printer features and capacities
Feature
Capacity
Connectivity
•
•
•
USB 2.0-compliant high-speed device
PictBridge/USB 2.0 high-speed host
port
Bluetooth 2.0 Enhanced Data Rate,
backward compatible with 1.0
(Bluetooth Profiles supported: HCRP,
BIP, OPP, SPP)
Ink cartridges
Black, tri-color, and photo ink cartridges
Supply yields
Visit www.hp.com/pageyield/ for more
information on estimated ink cartridge yields.
Printer languages
HP PCL 3 GUI
Processor and memory specifications
Processor: 220 MHz ARM9 core
Memory: 64 MB DDR2
System requirements
NOTE: For the most current information about supported operating systems and system
requirements, visit www.hp.com/support.
72
Technical information
NOTE: For support information on Microsoft® Windows® 8, visit www.hp.com/go/
printerinstall.
Operating system compatibility
•
Mac OS X v10.6, OS X Lion, OS X Mountain Lion
•
Microsoft® Windows® 8, Windows® 7, Windows Vista®, Windows® XP (32-bit) Service
Pack 2
•
Linux (For more information, see http://hplipopensource.com/hplip-web/index.html).
Minimum requirements
•
Microsoft® Windows® 7: 1 GHz 32-bit (x86) or 64-bit (x64) processor; 1.1 GB hard disk
space; CD-ROM/DVD drive or Internet connection; USB port
•
Microsoft® Windows® Vista: 800 MHz 32-bit (x86) or 64-bit (x64) processor; 1.0 GB hard
disk space; CD-ROM/DVD drive or Internet connection; USB port
•
Microsoft® Windows® XP (32-bit) Service Pack 2: Intel® Pentium® II , Celeron® or
compatible processor; 233 MHz or higher; 600 MB hard disk space; CD-ROM/DVD drive or
internet connection; USB port
Memory device specifications
USB flash drives
NOTE: The printer can only read memory devices that have been formatted using the FAT,
FAT32, or EX_FAT file system.
HP has fully tested the following USB flash drives with the printer:
•
Kingston: Data Traveler 100 USB 2.0 flash drive (4 GB, 8 GB, and 16 GB)
•
Lexar JumpDrive Traveler: 1 GB
•
Imation: 1 GB USB Swivel
•
Sandisk: Cruzer Micro Skin USB Flash Drive (4 GB)
•
HP: HI-SPEED USB Flash Drive v100w (8 GB)
NOTE: You might be able to use other USB flash drives with the printer. However, HP
cannot guarantee that they correct functionality with the printer because they have not been
fully tested.
Mobile phone printing information
The following printing software for this printer is available for these mobile phones:
Mobile phone
Software
Web site
Windows Mobile*
Westtek JETCET
http://www.westtek.com/
pocketpc/jetcet/
Blackberry
Repligo Professional
http://www.cerience.com/
products/pro
* The printing software for Windows Mobile is available on the HP software CD.
Media specifications
Use the Understand supported sizes and Understand supported media types and weights tables
to determine the correct media to use with your printer, and to determine what features work with
the media you plan to use. See the Set minimum margins section for information about the
printing margins used by the printer, see the Guidelines for two-sided (duplex) printing section for
guidelines that should be followed when printing on both sides of a page.
Printer specifications
73
Appendix A
Understand specifications for supported media
Always use the correct media-type setting in the print driver, and configure the trays for the correct
media type. HP recommends testing any paper before buying it in large quantities.
•
Understand supported sizes
•
Understand supported media types and weights
Understand supported sizes
Media size
Standard media sizes
U.S. Letter (216 x 279 mm; 8.5 x 11 inches)
U.S. Legal (216 x 356 mm; 8.5 x 14 inches)
A4 (210 x 297 mm; 8.3 x 11.7 inches)
U.S. Executive (184 x 267 mm; 7.25 x 10.5 inches)
B5 (JIS) (182 x 257 mm; 7.17 x 10.12 inches)
A5 (148 x 210 mm; 5.8 x 8.3 inches)
A6 (105 x 148 mm; 4.13 x 5.83 inches)
U.S. Statement (140 x 216 mm; (5.5 x 8.5 inches)
Envelopes
U.S. #10 Envelope (105 x 241 mm; 4.12 x 9.5 inches)
C6 Envelope (114 x 162 mm; 4.5 x 6.4 inches)
Japanese Envelope Chou #3 (120 x 235 mm; 4.7 x 9.3 inches)
Japanese Envelope Chou #4 (90 x 205 mm; 3.5 x 8.1 inches)
Monarch Envelope (3.88 x 7.5 inches)
A2 Envelope (111 x 146 mm; 4.37 x 5.75 inches)
DL Envelope (110 x 220 mm; 4.3 x 8.7 inches)
Cards
Index card (76.2 x 127 mm; 3 x 5 inches)
Index card (102 x 152 mm; 4 x 6 inches)
Index card (127 x 203 mm; 5 x 8 inches)
Photo media
4 x 6 (102 x 152 mm; 4 x 6 inches)*
5 x 7 (13 x 18 cm; 5 x 7 inches)
8 x 10 (8 x 10 inches)
13 x 18 cm (5 x 7 inches)
(10 x 15 cm)*
74
Technical information
(continued)
Media size
(10 x 15 cm) tab *
Photo L (89 x 127 mm; 3.5 x 5 inches)*
2L (178 x 127 mm; 7.0 x 5.0 inches)
3.5 x 5 (88.9 x 127 mm)*
3 x 5 (76.2 x 127 mm)*
8.5 x 13 (215.9 x 330.2 mm)
4 x 6 tab (102 x 152 mm; 4 x 6 inches)*
4 x 8 tab (10 x 20 cm)*
Other media
Custom-size media between 76.2 to 216 mm wide and 101 to 355.6 mm long (3 to 8.5 inches
wide and 4 to 14 inches long)
* Borderless printing supported.
Understand supported media types and weights
Type
Weight
Capacity
Paper
64 to 90 g/m
2
(16 to 24 lb bond)
Photo media
250 g/m
2
Up to 50 sheets of plain
paper
(5 mm or 0.2 inch stacked)
Up to 5 sheets
(66 lb bond)
Envelopes
75 to 90 g/m2
Up to 3 envelopes
(20 to 24 lb bond envelope)
Cards
Up to 200 g/m2
Up to 5 cards
(110 lb index)
Set minimum margins
The document margins must match (or exceed) these margin settings in portrait orientation.
Printer specifications
75
Appendix A
Media
(1) Left
margin
(2) Right
margin
(3) Top
margin
(4) Bottom
margin
A4
3.3 mm (0.13
inches)
3.3 mm (0.13
inches)
3 mm (0.12
inches)
3 mm (0.12
inches)*
6.35 mm
(0.25 inches)
6.35 mm
(0.25 inches)
3 mm (0.12
inches)
3 mm (0.12
inches)*
2 mm (0.08
inches)
2 mm (0.08
inches)
3 mm (0.12
inches)
3 mm (0.12
inches)
3.3 mm (0.13
inches)
3.3 mm (0.13
inches)
14.2 mm
(0.56 inches)
14.2 mm
(0.56 inches)
U.S. Executive
U.S. Statement
B5
A5
U.S. Letter
U.S. Legal
Custom-size media
8.5 x 13 inches
Cards
Photo media
A6
Envelopes
* If you are using a computer running Windows, you can enable the printer to use a minimum
margin of 3.0 mm (0.12 inches). To achieve this margin, click the Advanced tab in the print driver,
and select Minimize Margins.
Guidelines for two-sided (duplex) printing
•
•
Always use media that conforms to the printer specifications. For more information, see
Media specifications.
Specify duplex options in the application or in the print driver.
•
Do not print on both sides of envelopes, photo paper, glossy media, or paper lighter than 18
lb bond (75 g/m2). Jams might occur with these media types.
•
Several kinds of media require a specific orientation when you print on both sides of a page,
such as letterhead, preprinted paper, and paper with watermarks and prepunched holes.
When you print from a computer running Windows, the printer prints the first side of the
media first. When you print from a computer using the Mac OS X, the printer prints the
second side first. Load the media with the front side facing down.
Print resolution
Black print resolution
Up to 600 dpi rendered black (when printing from a computer)
Color print resolution
Up to 4800 x 1200 optimized dpi color on select HP photo papers with 1200 input dpi. Photo
papers include the following:
◦
HP Premium Plus Photo
◦
HP Premium Photo
◦
HP Advanced Photo
Operating environment
Operating environment
Recommended relative humidity: 15 to 90% noncondensing
Recommended operating temperature: 15° to 32° C (59° to 90° F)
76
Technical information
Maximum operating temperature: 0° to 55° C (32° to 131° F)
Battery charging temperature: 2.5° to 40° C (36.5° to 104° F)
Battery usage temperature: -5° to 50° C (23° to 122° F)
Storage environment
Storage relative humidity: Up to 90% noncondensing at a temperature of 65° C (150° F)
Storage temperature: -40° to 60° C (-40° to 140° F)
Battery storage temperature: -20° to 60° C (-4° to 140° F)
Electrical requirements
Power supply
Universal power adapter (external)
Power requirements
Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3Hz)
Output voltage: 18.5 Vdc at 3.5 A
Power consumption
15.2 watts printing (Fast Draft Mode)
Acoustic emission specification
Print in Draft mode, noise levels per ISO 7779
Sound pressure (bystander position)
LpAm 51 (dBA)
Sound power
LwAd 6.5 (BA)
Printer specifications
77
Appendix A
Regulatory information
The printer meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
•
Regulatory model number
FCC statement
•
Notice to users in Korea
•
•
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
•
Noise emission statement for Germany
•
•
LED indicator statement
Gloss of housing of peripheral devices for Germany
•
Regulatory information for wireless products
•
European Union Regulatory Notice
Regulatory model number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRC-1003-01. This regulatory number should
not be confused with the marketing name (HP Officejet 100 (L411) Mobile Printer) or product
number.
78
Technical information
FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
•
Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by HP may void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
䈖䈱ⵝ⟎䈲䇮䉪䊤䉴Bᖱႎᛛⴚⵝ⟎䈪䈜䇯䈖䈱ⵝ⟎䈲䇮ኅᐸⅣႺ䈪૶↪䈜䉎䈖䈫䉕⋡⊛䈫䈚䈩
䈇䉁䈜䈏䇮䈖䈱ⵝ⟎䈏䊤䉳䉥䉇䊁䊧䊎䉳䊢䊮ฃାᯏ䈮ㄭធ䈚䈩૶↪䈘䉏䉎䈫䇮ฃା㓚ኂ䉕ᒁ䈐
⿠䈖䈜䈖䈫䈏䈅䉍䉁䈜䇯ขᛒ⺑᣿ᦠ䈮ᓥ䈦䈩ᱜ䈚䈇ข䉍ᛒ䈇䉕䈚䈩ਅ䈘䈇䇯
VCCI-B
Regulatory information
79
Appendix A
Notice to users in Japan about the power cord
Noise emission statement for Germany
Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19
LED indicator statement
Gloss of housing of peripheral devices for Germany
Regulatory information for wireless products
This section contains the following regulatory information pertaining to wireless products:
•
Exposure to radio frequency radiation
•
Notice to users in Brazil
•
Notice to users in Canada
•
Notice to users in Taiwan
Exposure to radio frequency radiation
Exposure to radio frequency radiation
Caution
The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. This
product and any attached external antenna, if supported, shall be placed in such a
manner to minimize the potential for human contact during normal operation. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20 cm (8 inches) during normal
operation.
80
Technical information
Notice to users in Brazil
Aviso aos usuários no Brasil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência
a sistemas operando em caráter primário. (Res.ANATEL 282/2001).
Notice to users in Canada
Notice to users in Canada/Note à l'attention des utilisateurs canadiens
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise
emissions from the digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications. The internal wireless radio complies with RSS
210 and RSS GEN of Industry Canada.
Utiliser à l'intérieur. Le présent appareil numérique n'émet pas de bruit radioélectrique
dépassant les limites applicables aux appareils numériques de la classe B prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada. Le composant RF interne est conforme a la norme RSS-210 and RSS GEN
d'Industrie Canada.
Notice to users in Taiwan
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
•
Low Voltage Directive 2006/95/EC
•
EMC Directive 2004/108/EC
•
Ecodesign Directive 2009/125/EC, where applicable
CE compliance of this product is valid only if powered with the correct CE-marked AC adapter
provided by HP.
If this product has telecommunications functionality, it also complies with the essential
requirements of the following EU Directive:
R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for
Regulatory information
81
Appendix A
this product or product family and available (in English only) either within the product
documentation or at the following web site: www.hp.com/go/certificates (type the product number
in the search field).
The compliance is indicated by one of the following conformity markings placed on the product:
For non-telecommunications
products and for EU harmonized
telecommunications products, such
as Bluetooth® within power class
below 10mW.
For EU non-harmonized
telecommunications products (If
applicable, a 4-digit notified body
number is inserted between CE
and !).
Please refer to the regulatory label provided on the product.
The telecommunications functionality of this product may be used in the following EU and EFTA
countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland, and United Kingdom.
The telephone connector (not available for all products) is intended for connection to analogue
telephone networks.
Products with wireless LAN devices
Some countries may have specific obligations or special requirements about the operation of
Wireless LAN networks such as indoor use only or restrictions of the channels available. Please
make sure that the country settings of the wireless network are correct.
France
For 2.4-GHz Wireless LAN operation of this product, certain restrictions apply: This product may
be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For
outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be used. For
the latest requirements, see www.arcep.fr.
The point of contact for regulatory matters is:
Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen,
GERMANY
82
Technical information
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been
kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have
been designed to separate easily. Fasteners and other connections are easy to locate, access,
and remove using common tools. High priority parts have been designed to access quickly for
efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html
This section contains the following topics:
•
Paper use
•
Plastics
•
Material safety data sheets
•
Recycling program
•
HP inkjet supplies recycling program
•
Disposal of waste equipment by users in private households in the European Union
•
Power consumption
•
Chemical Substances
•
Battery information
•
RoHS notices (China only)
Paper use
This printer is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at:
www.hp.com/go/msds
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/
regions, and partners with some of the largest electronic recycling centers throughout the world.
HP conserves resources by reselling some of its most popular products. For more information
regarding recycling of HP products, please visit:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used ink cartridges and ink cartridges
free of charge. For more information, go to the following Web site:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Environmental product stewardship program
83
Appendix A
84
English
Français
Deutsch
Italiano
Español
Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es
responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos
en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los
lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la
tienda donde adquirió el producto.
Česky
Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé
zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným
sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete
vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt
zakoupili.
Dansk
Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr
ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på
tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere
om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.
Nederlands
Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur
af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte
apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over
waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product
hebt aangeschaft.
Eesti
Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete
utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme
ostsite.
Suomi
Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite
toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös,
että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen
jälleenmyyjältä.
Ελληνικά
Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.
Magyar
A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata,
hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az
egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon
a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.
Latviski
Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces,
to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde
palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var
nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.
Lietuviškai
Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją
į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga
yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio
atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za
dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów
przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można
uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.
Português
Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo
smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio
separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate
nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza,
il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.
Descarte de equipamentos por usuários em residências da União Européia
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos
a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do
descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais
informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que
adquiriu o produto.
Slovenčina
Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei
den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom
mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a
zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade,
vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.
Slovenščina
Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer
que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter
votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem
mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili,
da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini,
v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.
Svenska
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Polski
Disposal of waste equipment by users in private households in the European Union
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation
för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både
människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar
kasserade produkter för återvinning.
Technical information
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is
qualified to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for
imaging equipment. The following mark appears on ENERGY STAR qualified imaging products:
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR
partner, HP has determined that this product meets ENERGY STAR guidelines for energy
efficiency.
Additional ENERGY STAR qualified imaging product model information is listed at:
www.hp.com/go/energystar
Chemical Substances
HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council). A chemical information report for this
product can be found at: www.hp.com/go/reach
Battery information
The printer comes with a lithium-ion rechargeable battery. This battery might require special
handling and disposal.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries. For more information about recycling programs, go to www.hp.com/
recycle.
For more information, see the user guide. (The user guide is available on your computer after you
install the software.)
Attention California users
The battery supplied with this product may contain perchlorate material. Special handling may
apply. For more information, go to the following web site: www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Environmental product stewardship program
85
Appendix A
RoHS notices (China only)
Toxic and hazardous substance table
86
Technical information
Third-party licenses
This section contains the following topics:
•
HP Officejet 100 (L411) Mobile Printer
HP Officejet 100 (L411) Mobile Printer
Third-party licences
Zlib
--------Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or
implied warranty. In no event will the authors be held liable
for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software
3. This notice may not be removed or altered from any source
distribution.
Jean-loup Gailly Mark Adler
jloup@gzip.org madler@alumni.caltech.edu
The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files ftp://
ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt
(deflate format) and rfc1952.txt (gzip format).
Independent JPEG Group's free JPEG software
------------------------------------------* Copyright (C) 1991-1998, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying
README file.
Third-party licenses
87
Appendix A
Readme File
Independent JPEG Group's free JPEG software
------------------------------------------This package contains C software to implement JPEG image encoding, decoding, and
transcoding. JPEG is a standardized compression method for full-color and gray-scale images.
The distributed programs provide conversion between JPEG "JFIF" format and image files in
PBMPLUS PPM/PGM, GIF, BMP, and Targa file formats. The core compression and
decompression library can easily be reused in other programs, such as image viewers. The
package is highly portable C code; we have tested it on many machines ranging from PCs to
Crays.
We are releasing this software for both noncommercial and commercial use. Companies are
welcome to use it as the basis for JPEG-related products.
We do not ask a royalty, although we do ask for an acknowledgement in
product literature (see the README file in the distribution for details). We hope to make this
software industrial-quality --- although, as with anything that's free, we offer no warranty and
accept no liability.
For more information, contact jpeg-info@uc.ag
LIBTIFF
---------Copyright (c) 1991-1996 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby
granted without fee, provided that (i) the above copyright notices and this permission notice
appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler
and Silicon Graphics may not be used in any advertising or publicity relating to the software
without the specific, prior written permission of Sam Leffler
and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY
KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF
ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
DATA OR PROFITS,WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
88
Technical information
DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
TIFF Library.
Rev 5.0 Lempel-Ziv & Welch Compression Support
This code is derived from the compress program whose code is
derived from software contributed to Berkeley by James A. Woods,
derived from original work by Spencer Thomas and Joseph Orost.
The original Berkeley copyright notice appears below in its
entirety.
Copyright (c) 1985, 1986 The Regents of the University of
California.All rights reserved.
This code is derived from software contributed to Berkeley by
James A. Woods, derived from original work by Spencer Thomas
and Joseph Orost.
Redistribution and use in source and binary forms are permitted
provided that the above copyright notice and this paragraph are
duplicated in all such forms and that any documentation,
advertising materials, and other materials related to such
distribution and use acknowledge that the software was developed
by the University of California, Berkeley. The name of the
University may not be used to endorse or promote products
derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED ``AS IS AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Third-party licenses
89
Appendix A
90
Technical information
B
HP supplies and accessories
This section provides information on HP supplies and accessories for the printer. The information
is subject to changes, visit the HP Web site (www.hpshopping.com) for the latest updates. You
can also make purchases through the Web site.
This section contains the following topics:
•
Order printing supplies online
•
Accessories
•
Supplies
Order printing supplies online
To order supplies online or create a printable shopping list, open the HP software that came with
the printer. For Windows, open the Toolbox, select the Estimated Ink Level tab, and then click
Shop Online. For Mac, click Shopping, and then select Shop for Supplies Online. With your
permission, the HP software uploads printer information, including model number, serial number,
and estimated ink levels. The HP supplies that work in your printer are pre-selected. You can
change quantities, add or remove items, and then print the list or purchase online at the HP Store
or other online retailers (options differ by country/region). Cartridge information and links to online
shopping also appear on ink alert messages.
You can also order online by visiting www.hp.com/buy/supplies. If prompted, select your country/
region, follow the prompts to select your printer, and then select the supplies you need.
NOTE: Ordering cartridges online is not supported in all countries/regions. However, many
countries/regions have information on ordering by telephone, locating a local store and
printing a shopping list. In addition, you can select the 'How to Buy' option at the top of the
www.hp.com/buy/supplies page to obtain information about purchasing HP products in your
country.
Accessories
The following accessories can be used with your HP Officejet Mobile Printer:
HP Battery for Officejet Mobile Printer
CQ775A
HP Mobile Printer and Notebook Case
Q6282A
Supplies
This section covers the following topics:
•
Ink cartridges
•
HP media
Ink cartridges
Ordering cartridges online is not supported in all countries/regions. However, many countries/
regions have information on ordering by telephone, locating a local store and printing a shopping
list. In addition, you can select the 'How to Buy' option at the top of the www.hp.com/buy/supplies
page to obtain information about purchasing HP products in your country.
HP supplies and accessories
91
Appendix B
You can find the ink cartridge number in the following places:
•
On the label of the ink cartridge you are replacing.
•
On the printer status page (see Understand the printer information pages).
•
In the cartridge details feature in the HP software. Different cartridge numbers are sold in
each country/region. To get the complete list of the cartridge numbers sold in each country/
region, select Travelling Information in Toolbox (Windows) or Travel Info in HP Utility
(Mac OS X). For more information, see Printer management tools.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only.
When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace cartridges until print
quality becomes unacceptable.
HP media
To order media such as HP Premium Paper, go to www.hp.com.
HP recommends plain papers with the ColorLok logo for printing
and copying of everyday documents. All papers with the
ColorLok logo are independently tested to meet high standards
of reliability and print quality, and produce documents with crisp,
vivid color, bolder blacks and dry faster than ordinary plain
papers. Look for papers with the ColorLok logo in a variety of
weights and sizes from major paper manufacturers.
92
HP supplies and accessories
C
Set up the printer for Bluetooth
communication
The printer allows you to print documents from Bluetooth devices without a cable connection.
Simply print from a Bluetooth device such as a PDA or camera phone. You can also use
Bluetooth technology to print from a computer to the printer.
Set up a Bluetooth wireless connection
This section describes how to set up and configure the device for a Bluetooth wireless connection.
You can configure Bluetooth wireless settings during software installation, or you can configure
settings later using Toolbox (Windows), HP Utility (Mac OS X), or the Toolbox software for PDAs
(Windows Mobile). For more information, see Printer management tools.
To connect the printer using Bluetooth communication (Windows)
NOTE: If you are using an external Bluetooth adapter for your computer, specific instructions
for adding the printer might be different. For more information, see the documentation or utility
provided with the Bluetooth adapter.
1.
If you are using an external Bluetooth adapter for your computer, make sure your computer
is started and then attach the Bluetooth adapter to a USB port on the computer.
If your computer has Bluetooth built in, just make sure the computer is started and that
Bluetooth is turned on.
2.
On the Windows taskbar, click Start, click Control Panel, click Hardware and Sound, and
then click Add a printer.
- Or Click Start, click Printer or Printers and Faxes, and then double-click the Add Printer icon
or click Add a printer.
3.
Follow the onscreen instructions to finish the installation.
To connect the printer using Bluetooth communication (Mac OS X)
1.
If you are using an external Bluetooth adapter for your computer, make sure your computer
is started and then attach the Bluetooth adapter to a USB port on the computer.
If your computer has Bluetooth built in, just make sure the computer is started and that
Bluetooth is turned on.
2.
Click System Preferences in the Dock, and then click Print & Fax.
3.
Click + (Add).
4.
Select the entry for the printer in the list with Bluetooth beside its name, and then click
Add.
5.
Follow the onscreen instructions to finish the installation.
Set Bluetooth security for the printer
You can enable the following printer security settings:
•
•
•
Require passkey authentication prior to someone printing to the printer from a Bluetooth
device.
Make the printer visible or invisible to Bluetooth printers that are within range.
To enable these settings, you can use Toolbox (Windows), HP Utility (Mac OS X), or the
Toolbox software for PDAs (Windows Mobile). For more information, see Printer
management tools.
Set up the printer for Bluetooth communication
93
Appendix C
Use a passkey to authenticate Bluetooth devices
You can set the security level of the printer to either High or Low.
•
Low: The printer does not require a passkey. Any Bluetooth device within range can print to
it.
NOTE: The default security setting is Low. Low level security does not require
authentication.
•
High: The printer requires a passkey from the Bluetooth device before allowing the printer
to send a print job to it.
NOTE: The printer ships with a predefined passkey that is set to six zeroes "000000".
Set the printer to be visible or not visible to Bluetooth devices
You can set the printer to be either visible to Bluetooth devices (public) or not visible to any
(private).
•
Visible: Any Bluetooth device within range can print to the printer.
•
Not visible: Only Bluetooth devices that have stored the device address of the printer can
print to it.
NOTE: The printer ships with a default accessibility level of Visible.
To reset to factory default settings
NOTE: Using the following instructions will reset only the device’s Bluetooth settings.
1.
Press and hold down
2.
While holding down
(Power button).
(Power button), press
(Resume button) 6 times.
3.
94
Release
(Power button).
Set up the printer for Bluetooth communication
(Cancel button) 4 times, then press
D
Printer management tools
This section contains the following topics:
•
Toolbox (Windows)
•
HP Utility (Mac OS X)
•
Toolbox software for PDAs (Microsoft Windows Mobile)
•
Uninstall and reinstall the HP software
Toolbox (Windows)
Toolbox provides maintenance information about the printer.
NOTE: Toolbox can be installed from the HP software CD by selecting the full installation
option if the computer meets the system requirements.
Open Toolbox
You can open Toolbox using one of the following methods:
•
Click Start, select Programs or All Programs, click HP, click the folder for your printer, and
then click Toolbox.
•
Right-click the HP Digital Imaging Monitor in the taskbar, point to Printer Model Name, and
then click Display Printer Toolbox.
•
From the printer preferences, click the Features tab, and then click Printer Services.
HP Utility (Mac OS X)
HP Utility contains tools to configure print settings, calibrate the printer, order supplies online, and
find website support information.
NOTE: The features available in HP Utility vary depending on the selected printer.
Ink level warnings and indicators provide estimates for planning purposes only. When you
receive a low on ink message, consider having a replacement cartridge available to avoid
possible printing delays. You do not need to replace cartridges until prompted to do so.
Open HP Utility
To open HP Utility, double-click the HP Utility icon. This icon is located in the Hewlett-Packard
folder in the Applications folder at the top level of the hard disk.
Toolbox software for PDAs (Microsoft Windows Mobile)
The Toolbox software for PDAs running Windows Mobile allows you to view status and
maintenance information about the printer. You can view ink levels and battery charge level, align
the print cartridges, and configure Bluetooth settings for wireless printing.
See the Toolbox software documentation for more information on using the Toolbox, or visit
www.hp.com/go/customercare.
Uninstall and reinstall the HP software
If the installation is incomplete, or if you connected the USB cable to the computer before
prompted by the HP software installation screen, you might need to uninstall and then reinstall the
HP software that came with the printer. Do not simply delete the printer application files from the
Printer management tools
95
Appendix D
computer. Make sure to remove them correctly using the uninstall utility provided when you
installed the HP software.
There are three methods to uninstall the HP software on a Windows computer, and one method to
uninstall on a Macintosh computer.
To uninstall from a Windows computer, method 1
1.
Disconnect the printer from your computer. Do not connect the printer to your computer until
you are prompted to do so by the HP software during the reinstall.
2.
On the Windows taskbar, click Start, select Programs or All Programs, select HP, select
the printer name, and then click Uninstall.
3.
4.
Follow the onscreen instructions.
If you are asked whether you would like to remove shared files, click No.
Other programs that use these files might not work correctly if the files are deleted.
5.
Restart the computer.
6.
To reinstall the HP software, insert the HP software CD into the computer's CD drive, follow
the onscreen instructions.
Connect the printer when the HP software prompts you to connect it to the computer.
7.
8.
Press the Power button to turn the printer on.
After connecting and turning on the printer, you might have to wait several minutes for all of
the Plug and Play events to complete.
9.
Follow the onscreen instructions.
When the HP software installation is complete, the HP Digital Imaging Monitor icon appears in
the Windows system tray.
To uninstall from a Windows computer, method 2
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
1.
Disconnect the printer from the computer.
NOTE: It is important that you disconnect the printer before restarting your computer.
Do not connect the printer to your computer until you are prompted to do so by the HP
software during the install.
2.
On the Windows taskbar, click Start, select Settings, select Control Panel, and then click
Add/Remove Programs.
- Or Click Start, click Control Panel, and then double-click Programs and Features.
3.
Select the printer name, and then click Change/Remove or Uninstall/Change.
Follow the onscreen instructions.
4.
Restart the computer.
5.
Insert the HP software CD into the computer's CD drive and then start the Setup program.
6.
Follow the onscreen instructions.
To uninstall from a Windows computer, method 3
NOTE: Use this method if Uninstall is not available in the Windows Start menu.
96
1.
Insert the HP software CD into the computer's CD drive, and then start the Setup program.
2.
Disconnect the printer from your computer. Do not connect the printer to your computer until
you are prompted to do so by the HP software during the reinstall.
3.
Select Uninstall and follow the onscreen directions.
4.
Restart the computer.
5.
Start the Setup program for the printer again.
Printer management tools
6.
7.
Select Install.
Follow the onscreen instructions.
To uninstall from a Macintosh computer, method 1
1.
Open HP Utility. For instructions, see Open HP Utility.
2.
Click the Application icon on the toolbar.
3.
Double click HP Uninstaller.
Follow the onscreen instructions.
4.
After the HP software is uninstalled, restart the computer.
5.
To reinstall the HP software, insert the HP software CD into the computer's CD drive.
6.
On the desktop, open the CD, and then double-click HP Installer.
7.
Follow the onscreen instructions.
To uninstall from a Macintosh computer, method 2
1.
Open the Finder.
2.
Double-click Applications.
3.
4.
Double-click Hewlett-Packard.
Double-click HP Uninstaller.
5.
Select the printer, and then double-click Uninstall.
Uninstall and reinstall the HP software
97
Appendix D
98
Printer management tools
E
How do I?
•
Get started
•
Print
•
Work with ink cartridges
•
Solve a problem
How do I?
99
Appendix E
100
How do I?
F
Errors (Windows)
This list represents some of the errors you might see on the computer screen (Windows) and how
to fix the errors.
Printer Disconnected
•
•
Ink Alert
•
•
Cartridge Problem
Paper Mismatch
•
The cartridge cradle cannot move
•
•
Paper Jam
The printer is out of paper
•
Printer Offline
•
•
Printer Paused
Document failed to print
•
The ink service module is almost full
•
•
Replace the ink service module immediately
Printer battery low
Printer Disconnected
The computer cannot communicate with the printer because one of the following events has
occurred:
•
The printer has been turned off.
•
The USB cable connecting the printer has been disconnected.
To solve this problem, try the following solutions:
•
Make sure the printer is turned on and that the
(Power) light is on.
•
Make sure the power cord and other cables are working and are firmly connected to the
printer.
•
Make sure the power cord is connected firmly to a functioning, alternating current (AC)
power outlet.
Ink Alert
The ink cartridge identified in the message is low on ink.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive
a low-ink warning message, consider having a replacement cartridge available to avoid possible
printing delays. You do not need to replace the ink cartridges until print quality becomes
unacceptable.
For information about replacing ink cartridges, see Replace the ink cartridges.
For information about ordering ink cartridges, see HP supplies and accessories.
For information about recycling used ink supplies, see HP inkjet supplies recycling program.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways,
including in the initialization process, which prepares the printer and cartridges for printing. In
addition, some residual ink is left in the cartridge after it is used. For more information see
www.hp.com/go/inkusage.
Errors (Windows)
101
Appendix F
Cartridge Problem
The ink cartridge identified in the message is missing, damaged, inserted into the wrong slot in the
printer, or not making full electrical contact with the printer.
To solve this problem, try the following solutions. Solutions are listed in order, with the most likely
solution first. If the first solution does not solve the problem, continue trying the remaining
solutions until the issue is resolved.
•
Solution 1: Make sure the ink cartridges are installed correctly
Solution 2: Turn the printer off and on
•
Solution 3: Clean the electrical contacts
•
Solution 4: Replace the ink cartridge
•
Solution 1: Make sure the ink cartridges are installed correctly
1.
Make sure the printer is turned on.
CAUTION: If the printer is turned off when you open the front access door to access
the ink cartridges, the printer cannot release the cartridges for changing. You might
damage the printer if the ink cartridges are not docked safely when you try to remove
them.
102
2.
Open the front access door.
The print carriage moves to the far right side of the printer.
3.
Wait until the print carriage is idle and silent, and then lift up the ink cartridge latch to
release the ink cartridge.
Errors (Windows)
4.
Pull the ink cartridge toward you, out of its slot.
CAUTION: Do not touch the copper-colored contacts or ink nozzles. Doing so can
result in clogs, ink failure, and bad electrical connections.
5.
Hold the ink cartridge with the HP logo on top, and reinsert the ink cartridge. Make sure you
push the ink cartridge in firmly until it snaps into place.
6.
Close the front access door and check if the error message has gone away.
If the problem persists, try the next solution.
Solution 2: Turn the printer off and on
Turn off the printer, and then turn it on again.
If the problem persists, try the next solution.
Solution 3: Clean the electrical contacts
Clean the electrical contacts on the ink cartridge. For more information, see Clean the ink
cartridge contacts.
If the problem persists, try the next solution.
Solution 4: Replace the ink cartridge
Replace the indicated ink cartridge. For more information, see HP supplies and accessories.
NOTE: If the cartridge is still under warranty, contact HP support for service or replacement.
For more information about ink cartridge warranty, see Ink cartridge warranty information.
If the problem persists after you replace the cartridge, contact HP support. For more information,
see HP support.
Paper Mismatch
The paper size or type selected in the print driver does not match the paper loaded in the printer.
Paper Mismatch
103
Appendix F
To solve this problem, try one of the following:
•
Load the correct paper in the printer, and then press
(Resume button). For more
information, see Load media
•
Press the (Cancel button) on the printer’s control panel, select a different paper size in
the print driver, and then print the document again.
The cartridge cradle cannot move
Something is blocking the ink cartridge cradle (the part of the printer that holds the ink cartridges).
To clear the obstruction, press the
printer for jams.
(Power) button to turn off the printer, and then check the
For more information, see Clear jams.
Paper Jam
Paper has become jammed in the printer.
Before you try to clear the jam, check the following:
•
Make sure that you have loaded paper that meets specifications and is not wrinkled, folded,
or damaged. For more information, see Media specifications.
•
•
Make sure that the printer is clean. For more information, see Clean the printer.
Make sure that the trays are loaded correctly and are not too full. For more information, see
Load media.
For instructions on clearing jams, as well as more information about how to avoid jams, see Clear
jams.
The printer is out of paper
The default tray is empty. Load more paper, and then press OK.
For more information, see Load media.
Printer Offline
The printer is currently offline. While offline, the printer cannot be used.
To change the printer's status, complete the following steps.
1.
2.
Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or Click Start, click Control Panel, and then double-click Printers.
If the printers listed in the dialog box are not being displayed in Details view, click the View
menu, and then click Details.
3.
If the printer is Offline, right-click the printer, and click Use Printer Online.
4.
Try using the printer again.
Printer Paused
The printer is currently paused. While paused, new jobs are added to the queue but are not
printed.
104
Errors (Windows)
To change the printer's status, complete the following steps.
1.
Click Start, point to Settings, and then click Printers or Printers and Faxes.
- Or Click Start, click Control Panel, and then double-click Printers.
2.
If the printers listed in the dialog box are not being displayed in Details view, click the View
menu, and then click Details.
3.
If the printer is Paused, right-click the printer, and click Resume Printing.
4.
Try using the printer again.
Document failed to print
The printer could not print the document because a problem occurred in the printing system.
For information about solving printing problems, see Solve printing problems.
The ink service module is almost full
The replaceable ink service module holds waste ink from the black ink cartridge. When the ink
service module is almost full, contact HP support to obtain a new module. For more information,
see HP support.
If you have a new ink service module, install it immediately by following the instructions that came
with the module.
For more information, see Replace the ink service module.
Replace the ink service module immediately
The replaceable ink service module holds waste ink from the black ink cartridge. The ink service
module is now full. The printer will not be able to print with the black ink cartridge until the ink
service module is replaced . Contact HP support to obtain a new module. For more information,
see HP support.
If you have a new ink service module, install it immediately by following the instructions that came
with the module.
TIP: When the ink service module is full, the printer stops printing. However, until the
replacement arrives, you can continue printing by removing the black ink cartridge and
printing with just the tri-color ink cartridge. Color results and print speeds, though, might be
affected. For more information about printing with a single ink cartridges, see Print with a
single ink cartridge.
For more information, see Replace the ink service module.
Printer battery low
The battery status light is green when the battery is 41-100% charged; amber when 10-40%
charged, red when less than 10% charged; and blinks red when less than 2% charged. Charge
the battery when the battery status light turns amber. If it turns red, charge the battery as soon as
possible.
The battery status is also displayed in the Toolbox (Windows). If you are using a Windows Mobile
device, you can use the Toolbox software for PDAs. For more information, see Printer
management tools.
Plug in the power cord to begin recharging the battery. See Install and use the battery.
Printer battery low
105
Appendix F
106
Errors (Windows)
Index
A
accessibility 7
accessories
warranty 70
acoustic emissions 77
after the support period 43
aligning ink cartridges 36
B
battery
charging 19
installing 18
recycling 18
removing 20
safety 18
battery slot 10
black and white pages
troubleshoot 52
blank pages, troubleshoot
print 46
Bluetooth
security settings 93
setup 93
troubleshooting 60
both sides, print on 29
C
calibrate color 37
camera 21
capacity
tray 75
cards
sizes supported 74
tray supporting 75
cartridges. See ink cartridges
clean
ink cartridge contacts 54
ink cartridge ink nozzle
area 55
cleaning
ink cartridges 37
color, calibrate 37
colors
bleeding 52
faded or dull 51
print black and white,
troubleshoot 52
troubleshoot 53
wrong 52
connections
Bluetooth 93
connectors, locating 10
control panel
locating 9
custom-size media
sizes supported 75
custom-size paper
Mac OS 27, 28
print on 27
customer support
electronic 39
cut-off pages, troubleshoot 47
H
Hewlett-Packard Company
notices 3
HP software
uninstall from Mac OS X 97
uninstall from Windows 96
HP Utility (Mac OS X)
opening 95
humidity specifications 76
I
firewalls, troubleshoot 44
ink cartridge
troubleshoot 45
ink cartridge door, locating 11
ink cartridge latch, locating 11
ink cartridges
aligning 36
check ink levels 32
clean contacts 54
clean ink nozzle area 55
cleaning 37
handle 33
locating 11
ordering online 91
part names 33
part numbers 91
replace 33
supported 72
tips 31
warranty 70
yields 72
ink levels, check 32
ink smearing, troubleshoot 50
installation
troubleshoot 58
G
J
D
double-sided printing 29
driver
warranty 70
duplexing 29
E
electrical specifications 77
envelopes
sizes supported 74
tray supporting 75
environmental specifications 76
environmental sustainability
program 83
F
graphics
ink not filling in 51
missing lines or dots 53
graphics placement,
troubleshoot 47
jams
clear 62
media to avoid 15
prevent 63
L
language, printer 72
107
load
photo 17
tray 16
load cards 17
load envelopes 16
load media 16
M
Mac OS
custom-size paper 27, 28
Print borderless 29
Print photos 26
print settings 24
Mac OS X
HP Utility 95
uninstall HP software 97
maintenance
check ink levels 32
replace ink cartridges 33
margins
setting, specifications 75
media
clear jams 62
duplexing 29
load tray 15
print on custom-size 27
selecting 15
specifications 73, 74
supported sizes 74
types and weights
supported 75
memory device 21
missing lines or dots,
troubleshoot 53
missing or incorrect information,
troubleshoot 46
multi-feeds, troubleshoot 58
N
network
printer information 60
networks
firewalls, troubleshoot 44
noise information 77
O
operating environment
specifications 76
operating systems
supported 72
output tray
locating 9
108
P
Q
paper
ordering 92
paper-feed problems,
troubleshoot 57
part numbers, supplies and
accessories 91
passkey authentication,
Bluetooth 93
PCL 3 support 72
phone support 40
phone support period
period for support 40
photo media
sizes supported 74
PictBridge 47
PictBridge device
connection 10
ports, specifications 72
power
specifications 77
power input, locating 10
print
Bluetooth 93
double-sided 29
slow 45
troubleshoot 43
Print borderless
Mac OS 29
Windows 28
Print brochures
print 24
print driver
warranty 70
Print envelope 25
Print envelopes
Mac OS 25
Print photos
Mac OS 26
Windows 26
print quality
troubleshoot 48
print-carriage access door,
locating 11
printer information pages
printing, understanding 60
printer software (Windows)
about 95
printheads
ordering online 91
part numbers 91
processor specifications 72
quality, troubleshoot
print 48
R
radio interference
regulatory information 80
recycle
ink cartridges 83
regulatory information 78, 80
regulatory model number 78
replace ink cartridges 33
S
security
Bluetooth 93
Security lock 10
setup
Bluetooth 93
skewed pages, troubleshoot 58
slow print, troubleshoot 45
software
warranty 70
sound pressure 77
specifications
acoustic emissions 77
electrical 77
media 73, 74
operating environment 76
physical 72
processor and memory 72
storage environment 77
system requirements 72
speed
troubleshoot print 45
storage environment
specifications 77
streaks or lines, troubleshoot 53
supplies
ordering online 91
yields 72
support 39
system requirements 72
T
temperature specifications 76
text
troubleshoot 47, 51, 53
text placement, troubleshoot 47
Toolbox (Windows)
about 95
opening 95
Index
tray
capacity 75
media sizes supported 74
media types and weights
supported 75
trays
capacities 75
load media 15
locating 9
media sizes supported 74
paper guides illustration 9
troubleshoot
blank pages printed 46
bleeding colors 52
Bluetooth 60
Bluetooth wireless
communication
devices 60
colors 51, 53
cut-off pages, incorrect text
or graphics placement 47
firewalls 44
ink cartridge 45
ink not filling text or
graphics 51
ink smearing 50
installation 58
lights are on or flashing 44
meaningless characters
print 49
media not coming out
correctly 58
media not picked up 58
media not supported 57
missing lines or dots 53
missing or incorrect
information 46
multiple pages are picked
up 58
nothing prints 44
paper-feed problems 57
print 43
print quality 48
printer shuts down 44
skewed pages 58
slow print 45
streaks or lines 53
tips 43
troubleshooting resources
printer information pages 60
two-sided printing 29
U
uninstall HP software
Mac OS X 97
Windows 96
USB connection
port, locating 10
specifications 72
V
voltage specifications 77
W
warranty 70
Web sites
accessibility information 7
customer support 39
environmental programs 83
order supplies and
accessories 91
supply yield data sheet 72
Windows
borderless 28
duplexing 29
print brochures 24
Print photos 26
print settings 23
system requirements 72
uninstall HP software 96
wireless communication
Bluetooth 93
regulatory information 80
wireless communication
devices
troubleshooting 60
109
110
Download PDF