Epson PowerLite Cinema 500 Specifications

Epson PowerLite Cinema 500 Projector
Projector Parts
Projector Specifications
General
Vertical lens shift knob
Control panel
Horizontal lens
shift knob
Lamp cover
Lens cover
Infrared
receiver
Ventilation slots
Adjustable foot
Input A port
Video port
HDMI
Poly-silicon Thin Film Transistor (TFT)
active matrix with Micro Lens Array
Size of LCD panels
Diagonal: 0.7 inches (18 mm)
Lens
F=2.1 to 4.3 mm, f=21.4 to 31.7 mm
Zoom ratio
1:1.5
Resolution
1280 × 720 pixels (720p)
Brightness
1000 ANSI lumens max. (Dynamic or
Living Room color mode)
Contrast ratio
1200:1
Image size
30 to 300 inches (0.76 to 7.6 m)
Projection distance
2.9 to 44 feet (0.9 to 13.4 m)
Optical aspect ratio 16:9
Keystone correction ± 15 ° vertical
angle
S-Video port
TM
Type of display
USB port
Noise level
Network port
port
D4 port (used
mainly in Japan)
Infrared
receiver
36 dB (Dynamic or Living Room color
mode); 27 dB (all other color modes)
Lamp
Type
UHE (Ultra High Efficiency)
Power consumption 200 W
Kensington®
lock port
AC power inlet
Input B port
Trigger out port
Menu button
(displays on-screen menu)
Part number
V13H010L28
Range
30 feet (10 meters)
Battery
AA × 2
Dimensions
Source button
(switches input source)
Menu navigation
buttons
1700 hours (Dynamic or Living
Room color mode)
3000 hours (all other color modes)
Remote Control
Control (RS-232C) port
Select button
(selects menu options)
Lamp life
(approximate)
Height
4.7 inches (119 mm)
Zoom button
Width
17.7 inches (450 mm)
Indicator
lights
Depth
13.6 inches (345 mm)
Weight
13.8 lb (6.2 kg)
Aspect button
(switches aspect ratio)
Power
button
Focus button
Esc button
(exits current menu item)
Keystone correction buttons
(correct shape of non-rectangular images)
2/04
Epson PowerLite Cinema 500 Projector - 1
Epson PowerLite Cinema 500 Projector
Electrical
Image Size and Projection Distance
Rated frequency
50/60 Hz
Power supply
100 to 120 V: 3.3 A
200 to 240 V: 1.5 A
The maximum size of the image is determined by the distance
from the projector’s lens to the screen. Depending on how you
use the Zoom and other settings, the actual size may be smaller.
Power consumption Operating: 290 W max.
Standby: 0.7 W
Environmental
Temperature
(non-condensing)
Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
Operating: 20 to 80% RH,
non-condensing
Storage: 10 to 90% RH, non-condensing
Safety
United States
FCC Part 15B Class B
UL1950 Rev. 3
Canada
ICES-003 Class B
CSA C22.2 No. 950-95 (cUL)
CE Marking
Directive 89/336/EEC
EN 55022, 1998 Class B
EN 55024, 1998
Projection
distance
Maximum diagonal image size
(16:9)
2.9 feet
30 inches (26 × 14 inches)
3.9 feet
40 inches (34 × 19 inches)
5.9 feet
60 inches (52 × 29 inches)
7.9 feet
80 inches (69 × 39 inches)
9.9 feet
100 inches (87 × 49 inches)
19.9 feet
200 inches (174 × 98 inches)
29.9 feet
300 inches (261 × 147 inches)
Projecting a Square Image
For best image quality, place the projector at a height where its
lens is between the top and bottom of the screen. This lets you
keep the projector level and use the vertical lens shift knob to
position the image.
Positioning the Projector
You can install the projector for these viewing setups:
If you place the projector above or below screen level, you’ll
have to tilt it up or down to aim the image at the screen; this
distorts (or “keystones”) the shape of the image, but you can
correct it using the projector’s Keystone function (see page 5).
Front/Ceiling
Rear/Ceiling
Front
Rear
When projecting from a rear or overhead position, reorient the
image by selecting the correct Projection option (see page 5).
2 - Epson PowerLite Cinema 500 Projector
2/04
Epson PowerLite Cinema 500 Projector
When connecting video equipment to the Input A or Input B
port, connect the component video cable to the three terminals
on the left. Be sure to match the corresponding colors between
the cable and the terminals.
If you place the projector off to the side, aim it straight ahead
(rather than at the center of the screen), then use the horizontal
lens shift knob to center the image. Do not place the projector
farther to the left or right than the edge of the screen, or you
will not be able to project a square (or rectangular) image.
Video connection:
Computer connection:
Vertical lens shift knob
Horizontal lens
shift knob
Projector’s
Input A or B port
RCA
adapters
Component video
cable
Adjustable
feet
VGA-to-BNC
monitor cable
Tip: You can display a test pattern to help you center the image on
the screen. Press the Pattern button on the remote control, then
select Cross-hatching. You can use the feet to correct the angle of
the image if it’s tilted.
When connecting a computer, use a VGA-to-BNC monitor
cable, and attach RCA adapters to each of the five BNC
connectors. Use the markings on the connectors to match them
to the correct terminals on the projector.
Cable Connections
Making Other Connections
Depending on how you plan to use the projector, you may need
to connect these additional cables:
You can connect up to five pieces of video equipment to the
projector, using the ports listed below (cables are not included):
❏ Control (RS-232C),
Port
Required Cable
Supported video formats
Video
RCA video cable
Analog TV (NTSC, PAL, SECAM)
S-Video
S-video cable
Analog TV (NTSC, PAL, SECAM)
Input A*
For video, use a 3connector component
video cable.
For a computer, use a 5connector VGA-to-BNC
monitor cable and attach
RCA adapters to each of
the five BNC connectors.
Digital TV (SDTV and HDTV)
Analog TV (NTSC, PAL, SECAM)
Various computer monitor
formats (see table on page 4)
Input B*
Same as Input A
Same as Input A
HDMI
HDMI cable
Digital TV (SDTV and HDTV)
Various computer monitor
formats (see table on page 4)
USB, or
network port
Connect a computer to one of these ports to use the
Cinema Color Editor software (see page 10). A USB cable
is included.
Caution: Be sure to install the Cinema Color Editor software
before connecting the USB cable (see the User’s Guide).
❏ Trigger out port
This port outputs a
12-volt DC signal when
the projector is turned on,
and can be used to raise
or lower a projection
screen automatically.
Connect a 3.5-mm mini
jack to the port, as shown.
* For video, select YCbCr, YPbPr, or RGB-Video as the Input Signal
setting in the projector’s menu system (see page 5). For a computer
connection, select RGB.
For best results, connect your video equipment to the
HDMI (High-Definition Multimedia Interface) port. If your
equipment doesn’t support HDMI, connect it to one of the
following ports (highest quality listed first): Input A or B (for
component video), S-Video, or Video (composite video).
2/04
Epson PowerLite Cinema 500 Projector - 3
Epson PowerLite Cinema 500 Projector
Compatible Video Formats
Turning the Projector On and Off
The projector supports NTSC, PAL, and SECAM, as well as
the digital video and computer monitor formats listed below.
1. Connect the power cord to the projector and a grounded
electrical outlet.
Digital video formats
Format
Signal name
Resolution
Aspect ratio
SDTV
480i
480p*
575i
575p
640 × 480
640 × 480
768 × 576
768 × 576
4:3
4:3
4:3
4:3
HDTV
720p
1080i
1280 × 720
1920 × 1080
16:9
16:9
2. Press the On button on the remote control, or press the
P Power button on the projector.
* Not available for RGB Video.
The projector takes about 30 seconds to warm up. If you
don’t see an image, you may need to select the image source
(see page 5).[]
If you’re projecting from a computer in analog RGB format, set
the computer’s video card at a refresh rate (vertical frequency)
that’s compatible with one of the following monitor formats.
The frequencies of some computers may not allow images to
display correctly.
Turning Off the Projector
To turn off the projector, press the Off button on the remote
control (or press the P Power button on the projector twice).
Let the projector cool while the Ppower light flashes (about 30
seconds). Once the light stops flashing and stays on, it’s safe to
unplug the projector.
Computer monitor formats (4:3)
Format
Resolution
Refresh rate (Hz)
VGA
640 × 480
60
VESA
640 × 480
72, 75, 85
SVGA
800 × 600
60, 72, 75, 85
XGA
1024 × 768
43, 60, 70, 75
MAC13”
MAC16”
MAC19”
640 × 480
832 × 624
1024 × 768
67
75
75
Caution: Turn the projector off when not in use. Continuous
24-hour-a-day use may reduce its overall life. Never unplug the
projector without pressing the Off button and letting it cool, or you
could damage it and reduce lamp life.
Locking the Projector
You can lock the projector to prevent the image from being
accidentally changed once it’s adjusted, and to keep children
from using the projector without adult supervision.
1. Press the Menu button on the remote control.
2. Use the menu navigation buttons to open the Setting menu,
then open the Operation menu and select Lock Setting.
3. Choose from these options:
❏ Focus Lock to prevent the focus from being changed.
❏ Zoom Lock to prevent the picture size from being
changed.
❏ Key Lock to disable all the buttons on the projector’s
control panel. To operate the projector, you have to use
the remote control.
4 - Epson PowerLite Cinema 500 Projector
2/04
Epson PowerLite Cinema 500 Projector
Inverting and Mirroring the Image
Basic Image Adjustments
If the image is upside-down or backwards, use the Projection
function to adjust it:
Once the projector is turned on, use these functions to adjust
the image.
1. Press the Menu button on the remote control.
2. Use the menu navigation buttons to open the Setting menu,
then open the Screen menu and select Projection.
Selecting the Image Source
If you don’t see the image you want, press the Source button
on the remote control that corresponds to the port to which
your video equipment is connected. For example:
To select the image source
connected to the Video port . . .
3. Choose from these options:
❏ Front if the projector is located in front of the screen (for
example, on a table).
❏ Front/Ceiling if the projector is located in front of the
screen and mounted overhead.
. . . press the Video
button
❏ Rear if the projector is located behind the screen.
❏ Rear/Ceiling if the projector is located behind the screen
and mounted overhead.
Selecting the Input Signal
If you’re using the projector’s Input A or B port, select the
correct setting for the type of video equipment you’ve
connected to it:
1. Press the Menu button on the remote control.
Focusing and Zooming the Image
2. Use the menu navigation buttons to open the Setting menu,
then open the Input Signal menu and select Input A or
Input B (depending on the port to which you’ve connected
your equipment).
To adjust the sharpness or size of the image:
Note: Before starting, you may want to display a test pattern to
facilitate adjustment. Press the Pattern button on the remote
control, then select Cross-hatching.
3. Choose from these options:
❏ YCbCr for a video player that outputs an NTSC signal.
1. Press the Focus or Zoom button on the projector or remote
control.
❏ YPbPr for a video player that outputs an HDTV signal.
❏ RGB-Video if your video player outputs an RGB video
signal.
You see this screen:
❏ RGB if your image is coming from a computer.
Performing Keystone Correction
If the projected image looks like
function to correct its shape.
2. Use the
or
, use the Keystone
Note: If the image is shaped like
or
, the projector has been
placed off to the side of the screen and angled toward it. Face the
projector straight ahead (instead of at the center of the screen), then
use the horizontal lens shift knob to center the image.
arrow buttons to adjust the image.
Note: If you use the remote control, you can stand close to the
screen while focusing the image. This lets you adjust the picture
more precisely.
To perform keystone correction:
1. Press the Menu button on the remote control.
3. Press ESC when done.
2. Use the menu navigation buttons to open the Setting menu,
then open the Screen menu and select Keystone.
3. Use the
arrow buttons to adjust the shape of the image.
4. Press the Menu button when done.
2/04
Epson PowerLite Cinema 500 Projector - 5
Epson PowerLite Cinema 500 Projector
Choosing the Color Mode
Choosing the Aspect Ratio
You can change the Color Mode to adjust the brightness,
contrast, and color, letting you quickly optimize the image for
various lighting environments.
Depending on the port to which your equipment is connected,
your image can be automatically sized to fit on the screen when
Auto is selected as the Aspect setting. If the image doesn’t fit the
way you like (as, for example, when using the Input A or B
port), you may need to set the aspect ratio yourself.
1. Select the image source you want to adjust (a different Color
Mode can be saved with each image source).
2. Press the Color Mode button on the remote control. Then
choose from these settings:
4:3 image using Normal setting
16:9 image using Zoom setting
❏ Dynamic for projecting images with vivid color in
brightly lit rooms.
❏ Living Room for projecting images with vivid color
under ordinary room lighting.
❏ Natural for projecting in subdued lighting; increases
contrast and makes flesh tones appear more natural.
Press the Aspect button, then choose from these settings:
❏ Normal for standard TV broadcasts, computer images, or
images having a 4:3 aspect ratio.
❏ Theatre for projecting in subdued lighting; enhances the
appearance of movies with dark scenes.
❏ Zoom for images recorded in 16:9 (wide-screen) format.
❏ Theatre Black for projecting in fully darkened rooms.
❏ Wide if you want to expand a 4:3 image to 16:9 so it fills the
whole screen. This stretches only the right and left sides of
the image; the central part is unchanged.
❏ sRGB for projecting computer images that conform to
the sRGB color standard.
❏ Squeeze for recordings made in a compressed (anamorphic)
16:9 format, sometimes called “Squeeze Mode.”
Note: You can fine-tune the color and other image quality settings
using the projector’s menu system or the Cinema Color Editor
software. See the User’s Guide for details.
❏ Through if your image is smaller than 1280 × 720 pixels
and you want to display it at its original pixel size without
resizing it to fit on the screen.
❏ Squeeze Through if your image is recorded in Squeeze
Mode, is smaller than 1280 × 720 pixels, and you want to
display it at its original pixel size.
6 - Epson PowerLite Cinema 500 Projector
2/04
Epson PowerLite Cinema 500 Projector
When you select an Aspect setting, the resolution at which the image displays depends on the currently active picture source. The
resolutions for all video formats and aspect ratio settings are listed below.
Analog TV
Aspect setting
Format
Normal
Zoom
Squeeze/Wide
Through
Squeeze
Through
NTSC
960 × 720
1280 × 720
1280 × 720
596 × 446
794 × 446
PAL or SECAM
960 × 720
960 × 720
960 × 720
708 × 528
944 × 528
Digital component video
Aspect setting
Signal
name
Normal
Zoom
Squeeze/Wide
Through
Squeeze
Through
SDTV
480i
480p
575i
575p
960 × 720
960 × 720
960 × 720
960 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
596 × 446
596 × 446
708 × 528
708 × 528
794 × 446
794 × 446
944 × 528
944 × 528
HDTV
720p
1080i
1280 × 720
1280 × 720
—
—
—
—
1176 × 664
—
—
—
Format
Digital RGB video
Aspect setting
Signal
name
Normal
Zoom
Squeeze/Wide
Through
Squeeze
Through
SDTV
480i
480p
575i
575p
960 × 720
960 × 720
960 × 720
960 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
640 × 480
640 × 480
768 × 576
768 × 576
853 × 480
853 × 480
1024 × 576
1024 × 576
HDTV
720p
1080i
1280 × 720
1280 × 720
—
—
—
—
1280 × 720
—
—
—
Format
Computer monitor formats (analog RGB)
Aspect setting
Format
Normal
Zoom
Squeeze/Wide
Through
Squeeze
Through
VGA
960 × 720
1280 × 720
1280 × 720
640 × 480
853 × 480
VESA
960 × 720
1280 × 720
1280 × 720
640 × 480
853 × 480
SVGA
960 × 720
1280 × 720
1280 × 720
800 × 600
1066 × 600
XGA
960 × 720
1280 × 720
1280 × 720
—
—
MAC13 inch
MAC16 inch
MAC19 inch
960 × 720
960 × 720
960 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
1280 × 720
640 × 480
832 × 624
—
853 × 480
1109 × 624
—
2/04
Epson PowerLite Cinema 500 Projector - 7
Epson PowerLite Cinema 500 Projector
Projector Status Lights
Cleaning and Replacing the Air Filter
If your projector isn’t working correctly, first turn it off, wait for
the warning light to turn a steady orange, and unplug it. Then
plug the power cord back in and turn on the projector. If this
doesn’t solve the problem, check the lights on top of the
projector. They alert you to possible problems.
Clean the air filter on the bottom of the projector after every
100 hours of use. If it’s not cleaned periodically, it can become
clogged with dust, preventing proper ventilation. This can cause
overheating and damage the projector.
1. Turn off the projector and wait for the P power light to stop
flashing.
Lamp light
Power light
2. Unplug the power cord and disconnect any cables.
3. Turn the projector over. Then use a small vacuum cleaner
designed for computers and other office equipment to clean
the filter. If you don’t have one, gently clean the filter using a
very soft brush, such as an artist’s paintbrush.
Temperature light
Light
Status
Action
P
off
Make sure the power cable is connected
securely at both ends, then press the
P Power button to turn on the projector. If
you’ve just replaced the lamp, make sure the
cover is securely fastened.
P
orange
The projector is in standby mode. You can
unplug it to turn it off or press the P Power
button to turn it on.
P
flashing
green
The projector is warming up. Wait about 30
seconds for a picture to appear.
P
green
The projector is operating normally.
P
flashing
orange
You’ve turned off the projector and it’s cooling
down. Wait until the light stops flashing, then
unplug the projector (or press the P Power
button to turn it back on). Never unplug the
projector when the light is flashing orange.
flashing
orange
High-speed cooling is in progress. If the
projector gets too hot again, it turns off
automatically. Make sure nothing is blocking
the air filter. If it continues to overheat, clean
the air filter; see instructions at right.
red
The projector is too hot and the lamp has
turned off. Wait 5 minutes, then unplug the
projector. Make sure nothing is blocking the air
filter. If it continues to overheat, clean the air
filter; see instructions at right.
flashing
orange
The lamp will need to be replaced soon. Make
sure you have a spare lamp handy.
red
The lamp needs to be replaced (see page 9).
If you just replaced the lamp, the cover may
be loose. Make sure it’s securely fastened.
flashing red
If the lamp and/or temperature light is flashing
red, there may be an internal problem. Turn off
the projector, wait for the P power light to
stop flashing, then unplug it from the electrical
outlet and contact Epson for help.
8 - Epson PowerLite Cinema 500 Projector
If the dirt is difficult to remove or the filter is broken, replace
it. Contact your dealer or call Epson at (800) 873-7766 and
ask for part number V13H134A04. In Canada, call (800)
463-7766 for dealer referral.
4. If you need to replace the filter, release the tab and lift open
the cover.
5. Remove the old filter and replace it with a new one.
6. To replace the cover, insert the tabs and press down until the
cover clicks into place.
2/04
Epson PowerLite Cinema 500 Projector
4. Loosen the two screws securing the lamp.
Replacing the Lamp
The projection lamp lasts for up to 3000 hours (in low
brightness mode) or 1700 hours (in high brightness mode). You
can use the Info menu to check how long it’s been in use. It’s
time to replace the lamp when:
❏ The projected image gets darker or starts to deteriorate.
❏ The projector’s lamp light is red.
❏ The message Replace the lamp appears on the screen when
you start projecting.
5. Grasp the lamp as shown and pull it straight out.
Note: Lamp life results will vary depending on the selected mode,
environmental conditions, and usage.
Contact your dealer or call Epson at (800) 873-7766 in the
United States for a replacement lamp. Request part number
V13H010L28. In Canada, call (800) 463-7766 for dealer
referral.
Warning: Let the lamp cool fully before replacing it. In the unlikely
event that the lamp has broken, small glass fragments may be
present and should be removed carefully to avoid injury.
6. Fully insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp assembly.
Touching the glass could result in premature lamp failure.
The lamp component contains mercury. Please consult your state
and local regulations regarding proper disposal or recycling, and do
not place in the trash.
7. Replace the cover and tighten its screws. (The projector
won’t work if the lamp cover is open or loose.)
Caution: Never touch the lamp with your bare hands; the invisible
residue left by the oil on your hands may shorten the lamp life. Use
a cloth or glove to handle the new lamp.
8. Reset the lamp usage timer, as described in the next section.
Follow these steps to replace the lamp:
Resetting the Lamp Timer
1. Turn off the projector and wait for the P power light to stop
flashing, then unplug the power cord.
After installing a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used.
2. If the projector has been on, let it cool for about an hour.
1. Press the Menu button on the projector or remote control.
3. Loosen the two screws securing the lamp cover (they don’t
come all the way out), and then remove the cover.
2. Use the menu navigation buttons to open the Reset menu,
then select Lamp-Hours Reset.
3. When you see a confirmation prompt, highlight Yes and
press the Select button.
4. When you’re finished, press the Menu button to exit.
The lamp usage timer doesn’t register until you’ve used the
lamp for at least 10 hours.
2/04
Epson PowerLite Cinema 500 Projector - 9
Epson PowerLite Cinema 500 Projector
Adjusting the Picture Quality
Using Cinema Color Editor
You can use Cinema Color Editor in place of the projector’s
menu system to adjust the image.
Cinema Color Editor is a program that lets you use your
computer to operate the projector in place of the remote
control, and to make fine custom color adjustments.
1. Click the Picture Quality tab.
First, select
Picture Quality
Note: See the User’s Guide for instructions on installing Cinema
Color Editor and connecting the projector to your computer.
Remote Control Operations
You can use Cinema Color Editor to change the image source,
adjust the aspect ratio, or turn the power off—just as you would
from the remote control.
Then click one of
these buttons to
access additional
settings
1. Open Cinema Color Editor, then click the Remote Control
tab.
Select Remote Control
Turn off the power
2. Click one of the buttons shown above to access these
settings:
Change the image source
(see page 5)
Button
Available adjustments
Input Adjustment
Brightness
Color Intensity
Tint
Sharpness
Color Temp. and Flesh Tone
Tracking
Sync
Adjust the aspect ratio
(see page 6)
Color Mode
Color Adjustment (see next section)
2. Click one of the buttons for the options shown above.
EPSON Super White
Progressive
Motion Detection
Output Scaling
Setup Level
Noise Reduction
DVI-Video Level
Auto Setup
Note: See the User’s Guide for details on using these settings.
10 - Epson PowerLite Cinema 500 Projector
2/04
Epson PowerLite Cinema 500 Projector
Adjusting the Color
Optional Accessories
You can use the Color Adjustment settings to fine-tune the
color of the image.
Epson provides the following optional accessories:
1. Select Picture Quality, then click Adjustment of image.
Product
Part number
❏ RGB: Adjusts the offset, gamma, and gain for each signal
color. Use Offset to adjust darker shades, Gamma for
intermediate shades, and Gain for the lightest shades.
Replacement lamp (ELPLP28)
V13H010L28
Air filter replacement (ELPAF04)
V13H134A04
Ceiling mount
ELPHB01
❏ RGBCMY: Adjusts the hue and saturation for each of six
colors, as shown on the color palette below. After moving
a slider bar, click Apply.
Kensington security lock
ELPSL01
Macintosh adapter set (includes monitor
adapter and desktop adapter)
ELPAP01
S-video cable
ELPSV01
2. Select one of the following modes, then click Adjust.
You can purchase these accessories from your dealer, by calling
Epson at (800) 873-7766, or by visiting the Epson Store at
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Adjust
the hue
(red,
green,
blue,
cyan,
magenta,
yellow)
SM
Related Documentation
CPD-17304
EPSON PowerLite Cinema 500
User’s Guide
CPD- 17303
EPSON Extra Care Home Service
warranty
Adjust the saturation
Saving and Recalling Picture Settings
Once you’ve adjusted the picture to your liking, you can save
your settings in the projector’s memory. Then you can use the
remote control (or Cinema Color Editor) to recall them for
future use. You can also rename or delete memory settings
stored on the projector.
SM
Note: Setup instructions are provided in the User’s Guide. There is
no setup sheet.
1. Select Picture Quality, then click Memory management.
Use these
settings to
select,
register, or
edit a
memory
setting
2. Click one of the following:
❏ Select to use a memory setting stored on the projector
❏ Register to create a new memory setting
❏ Edit to change the name of an existing setting
See the User’s Guide for details.
2/04
Epson PowerLite Cinema 500 Projector - 11
Epson PowerLite Cinema 500 Projector
12 - Epson PowerLite Cinema 500 Projector
2/04