ALLEN&HEATH
®
®
PC SOFTWARE RELEASE NOTES
X96_PCSRN_v4670_2
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 1 of 6
DRIVER INSTALLATION (PC)
This release updates, ASIO compatible, Microsoft Windows® PC system Device Drivers for XONE:96
Xone Product
Device Driver (PC)
Xone:96
X96_v4670.zip
[X96_v4670.exe]
Microsoft Windows®
11
Microsoft Windows®
10
Refer to page 6 for details of software changelogs.
Supported OS:
Installing XONE Device Software
In order to access all internal dual-soundcard channels of the Xone:96 for use with Windows® PC, you will
need to install the dedicated, ASIO® compatible, Device Drivers.
Check you have downloaded the current Device Software bundle, available for download from the Allen &
Heath website: www.allen-heath.com/xone96
PLEASE FOLLOW INSTALL INSTRUCTIONS CAREFULLY
NOTE: Please ensure you are logged on to the PC with Administrator access enabled
•
When the driver package has downloaded, extract the installer to your computer desktop.
Follow the on-screen instructions as detailed below and overleaf.
The installer will also guide you through the steps necessary to install this software.
Double-click on the XONE:96 Driver Setup application, X96_v4670 to begin.
•
•
•
Click Yes on the User Account Control if prompted to confirm and continue installation.
Click Next to run the installer application.
•
Click on the Install tab to pre-install the Device Drivers to the default system folder.
A series of messages will be displayed…
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 2 of 6
DRIVER INSTALLATION (PC) continued
•
•
This may take some time to complete.
Please wait while XONE:96 v4.67.0 software is installed…
•
•
Click Install If promoted to install Allen&Heath Sound, video and game controllers software.
Click Install if prompted to install Allen&Heath XONE:96 Audio Devices software.
•
Connect the XONE:96 mixer to your PC via the USB 1, or USB 2 port and power the unit ON*.
•
•
Click Next to continue once the pre-installation process has completed.
Click Finish to complete the Device Driver installation.
NOTE:
It is possible to run the XONE:96 Device Driver pre-installation process without connecting the
XONE:96 mixer to your computer.
In this case you will be prompted to “...disconnect and reconnect the device to complete driver
installation.”
If the mixer cannot be connected, click Yes on the prompt to close the application.
To complete installation, connect the XONE:96 to your PC via USB, power the mixer ON.
Wait a few moments for the PC to enumerate the mixer before opening your software application.
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 3 of 6
DRIVER INSTALLATION (PC): DEVICE CHECK
Confirming Driver Installation and Hardware Device connection
Microsoft Windows®
When first connecting the XONE:96 to a PC computer after the Device Drivers are installed, check the mixer is recognised
correctly before opening your Digital DJ, or DAW, software application.
•
•
•
Connect the XONE:96 to your PC via USB 1 or 2
The corresponding USB 1/ 2 ACTIVE indictor illuminates BLUE
when the mixer is powered ON.
Click the Show hidden icons tab on the Taskbar
Check XONE:96 Control Panel icon is displayed
•
•
Next, click on the Windows Start icon.
The XONE:96 Control Panel icon should be displayed under
Recently added apps
•
•
•
•
•
•
Open the XONE 96 Control Panel
Status view displays: XONE:96 USB 1 (or USB 2) and Current Sample Rate
Format view Input and Output sections display:
12 channels and the currently selected bit depth.
Sample Rate is selectable from 44.1 to 96kHz.
Bit depth is selectable between 16bits and 32bits
Device Settings can be adjusted as required to suit applications, or host
system’s CPU capacity.
Adjustment is implemented via DAW host audio prefs (ASIO),
or system Sound dialogue (WDM)
See p.5 for supported buffer sizes. See p.6 for updated WDM Audio options
•
Next, open the Hardware Device Manager dialogue. Navigate to:
START / Settings / Devices / Device Manager
•
•
With the Device Drivers for the internal soundcards correctly installed, XONE:96 is listed as a hardware device under
three device trees.
Expand (click on >) the Audio inputs and outputs tree to display:
Aux 1 (Xone 96 USB n) + Aux 2/ Main Mix (Xone 96 USB n) + Input 1 - 4 (Xone 96 USB n)
and Output 1 - 4 (Xone 96 USB n) + Output A - B (Xone 96 USB n)
•
Expand Sound, Video and Game Controllers and XONE 96 Audio Devices to display: Xone 96 USB n
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 4 of 6
DUAL INTERNAL SOUNDCARD SPECIFICATIONS, USB 1 - USB 2
Digital Architecture (USB) Specification
Hi-Speed USB2.0 [USB B] ¦ macOS Class Compliant ¦ PC ASIO compatible [see p.2]
Analogue/Digital Line-up
0dBu = - 14dBFS
Audio Channels:
2 x 24 Channel ¦ 12 in / 12 out [6 x Stereo pairs]
2 x 6: [CH 1- 4 ¦ SEND1 ¦ MST/SEND2]
USB Audio Inputs [USB 1 and USB 2]:
USB Audio Outputs [USB 1 or USB 2]:
2 x 6: USB1 / USB2 [CH 1- 4 ¦ CH A - D]
Supported Variable Buffer Sizes:
32 / 64 / 128 / 256 / 512 / 1024 / 2048 / 4096 / 8192 samples
Supported Sample Rates:
44.1 kHz / 48kHz / 88.2kHz / 96kHz
Supported Bit depth:
16 bit / 32 bit
USB MIDI Channels:
2 x MIDI IN / 2 x MIDI OUT [USB 1 and USB 2]
XONE:96 soundcard channels are arranged in stereo pairs and will be displayed in your chosen Digital DJ, or
DAW, software as follows:
USB AUDIO ROUTING
Mixer Channel outputs to Computer [USB1 and USB2]
Soundcard Input
XONE:96 Outputs
DAW Input
USB 1 / USB 2_1
CH1 L (RIAA or LINE)
Ch 1 L
Ch 1 R
USB 1 / USB 2_2
CH1 R (RIAA or LINE)
Ch 2 L
USB 1 / USB 2_3
CH2 L (RIAA or LINE)
USB 1 / USB 2_4
CH2 R (RIAA or LINE)
Ch 2 R
Ch 3 L
USB 1 / USB 2_5
CH3 L (RIAA or LINE)
Ch 3 R
USB 1 / USB 2_6
CH3 R (RIAA or LINE)
USB 1 / USB 2_7
CH4 L (RIAA or LINE)
Ch 4 L
Ch 4 R
USB 1 / USB 2_8
CH4 R (RIAA or LINE)
Send 1 L
USB 1 / USB 2_9
SEND 1 L (PRE or POST)
Send 1 R
USB 1 / USB 2_10
SEND 1 R (PRE or POST)
USB 1 / USB 2_11
SEND 2 L or MST L
Send 2 L / MST L
Send 2 R / MST R
USB 1 / USB 2_12
SEND 2 R or MST R
Mixer Channel inputs from Computer [USB1 or USB2]
Soundcard Output
XONE:96 Inputs
DAW Output
USB 1 / USB 2_1
CH 1 USB 1 or USB 2_L
Ch 1 L
Ch 1 R
USB 1 / USB 2_2
CH 1 USB 1 or USB 2_R
Ch 2 L
USB 1 / USB 2_3
CH 2 USB 1 or USB 2_L
USB 1 / USB 2_4
CH 2 USB 1 or USB 2_R
Ch 2 R
Ch 3 L
USB 1 / USB 2_5
CH 3 USB 1 or USB 2_L
Ch 3 R
USB 1 / USB 2_6
CH 3 USB 1 or USB 2_R
USB 1 / USB 2_7
CH 4 USB 1 or USB 2_L
Ch 4 L
Ch 4 R
USB 1 / USB 2_8
CH 4 USB 1 or USB 2_R
Ch A L
USB 1 / USB 2_9
CHA USB 1 or USB 2_L
USB 1 / USB 2_10
CHA USB 1 or USB 2_R
Ch A R
Ch B L
USB 1 / USB 2_11
CHB USB 1 or USB 2_L
Ch B R
USB 1 / USB 2_12
CHB USB 1 or USB 2_R
XONE:96 is also fully Traktor Scratch Certified so the internal soundcards
brings support for DVS control of Native Instruments’ flagship TRAKTOR PRO 3
DJ software straight out of the box.
For more details on configuring the XONE:96 for use with timecode and Traktor,
please refer to p.30 of the XONE:96 User Guide (AP11645): www.allen-heath.com/xone96/
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 5 of 6
DEVICE SOFTWARE CHANGELOGS
Xone Product
Device Driver (PC)
Xone:96
X96_v4670.zip
[X96_v4670.exe]
Operating System:
Compatible
Support Active
Windows® 11
Windows® 10
Windows® 8.1
Windows® 7
Updated
12/2021
Software changelogs:
Xone:96 Device Drivers. v4.6.70
!
Windows®11 support is confirmed.
Updates full ASIO support for Microsoft Windows® PC.
Implements new options for WDM Audio operation with all five (stereo) channels
now displayed and selectable for WDM supported applications.
Playback and Recording default is CH1; Output 1 (Xone 96 USB n) / Input 1(Xone 96 USB n)
To re-route USB audio via different soundcard channels for playback;
Go to: Start > Settings > System > Sound. Output. Choose your output device
Select the required channel for USB playback to the mixer:
eg: For USB playback with applications supporting WDM audio only via Xone:96 CHA
Select: Output A (Xone 96 USB n)
Set the top panel CH A source select switch to the corresponding USB port (USB 1 or USB 2)
To re-route USB audio via different soundcard channels for recording, VST-FX, etc;
Go to: Start > Settings > System > Sound. Input.
Choose your input device
Select the required channel for USB output from the mixer:
eg: For USB recording with applications supporting WDM audio only;
Select: Aux 2 / Main (Xone 96 USB n)
Set the top panel USB 11/12 switch UP to MST
Direct support closed for legacy Microsoft Windows® Operating Systems
For more information, please visit: https://support.microsoft.com/
Minor bug fixes and improvements
Known Issues:
XONE96-26:
Clicks in Ableton Live 9 at high sample rates
Audible interruptions in the audio stream, manifest as ‘clicks’, when running Ableton Live 9
at high sample rates (88.2 and 96KHz), with XONE:96 ASIO Buffer Size set to Auto and
USB Streaming Mode set to Reliable.
This is a local DAW software application issue; resolved as follows:
In the XONE:96 Control Panel > Buffer Settings, adjust the ASIO Buffer Size to a fixed sample
rate, compatible with the capacity of your computer’s CPU.
Where necessary, adjust or reset the USB Streaming Mode option.
If you experience any other problem when installing Xone:96 Device Software, please contact
Allen&Heath Product Support http://support.allen-heath.com
ALLEN&HEATH
DECEMBER 2021
XONE:96_PC Software Release Notes
v4.6.70
Page 6 of 6
">