BUTURE JR600 Stick Vacuum Cleaner User Manual

USER MANUAL
BUTURE JR600 Stick Vacuum Cleaner
[email protected]
[Read this user manual carefully before first use. Keep this manual for further guidance in case]
[email protected]
1. WARNING
Thank you for purchasing the BUTURE JR600 stick vacuum cleaner.
Please read the user manual carefully before using the product and take safety protection
measures to avoid malfunctions caused by accidental operation. If the product is given to
another person, please make sure to also include this user manual.
The product provides a free 2-year warranty by default. To extend the warranty to 3 year,
please contact [email protected] in time to activate.
If you have any questions, please contact [email protected].
Personal Safety
01.
Store it indoors in a dry place and out of the reach of children.
02. This product is suitable for children 10 years old and above. Users with reduced
physical functions, sensory or intellectual abilities, or lack of experience and knowledge
are advised to use the product safely supervision or guidance and to be aware of the
hazards involved.
03. Please pay attention to safety when children or pets near the vacuum cleaner.
04. Children should not clean or use the product without supervision.
05. Use only manufacturer’s recommended attachments as described in this manual;
misuse or use of any accessory or attachment other than those recommended may
present a risk of personal injury.
06. Take extra care when cleaning stairs.
07. Keep the appliance and accessories away from the hot surface.
08. Do not block the appliances' openings or hinder airflow, keep openings free of any
objects including dust, lint, clothing, fingers (and all parts of the body).
Electrical Safety
01.
Only use batteries and chargers supplied by the manufacturer.
02. Never modify the charger in any way.
03. Do not pull the cord to disconnect it from a socket, grasp the plug and pull to
disconnect it.
04. Keep the charger cord away from hot surfaces and sharp edges.
05. The supply cord cannot be replaced. If the cord is damaged the charger should be
discarded and replaced.
06. Do not handle the charger or the appliance with wet hands.
07. Do not store, or charge the appliance outdoors.
08. The charger must be removed from the socket before removing the battery, cleaning,
or maintaining the appliance.
1
EN
[email protected]
Battery Safety
01.
This appliance includes Li-ion batteries, do not incinerate batteries or expose them to
high temperatures, as they may explode.
02. Liquid ejected from the battery may cause irritation or burns.
03. In an emergency contact professional help immediately.
04. Leaks from the battery cells can occur under extreme conditions. Do not touch any
liquid that leaks from the battery. If the liquid gets on the skin, wash immediately with
soap and water. If the liquid gets into the eyes, flush them immediately with clean
water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle
the battery and dispose of it immediately in accordance with local regulations.
05. When the battery pack is not in use, keep it away from paper clips, coins, keys, nails,
screws, or other small metal objects that could make a connection from one terminal
to another.
06. When you dispose of the appliance remove the battery and dispose of the battery
safely in accordance with local regulations.
2. CONTENT OF PACKAGE
Please check and confirm the accessories and parts according to the following sheet before
using. If any part is missing or defective, please contact [email protected] for customer
service in time.
Main Body
Motor
Air Filter
Stainless steel Filter +
Sponge + HEPA Filter
Dust Cup
EN
2
Battery Pack (not installed
on the main unit)
[email protected]
Accessories List
Main Body*1
Adapter*1
Wall Mount*1 (with
screw*3, expansion
tube*3)
Battery Pack*1
2 in 1 Brush*1
Electric Floor Brush*1
Crevice Brush*1
Telescopic Tube*1
Extra HEPA*1
Extra Sponge Filter*1
Cleaning Brush*1
User Manual*1
3
EN
[email protected]
3. KNOW YOUR PRODUCT
3.1 Product Details
Battery Pack
ON/OFF Button
Charging Port
Digital Display
Dust Cup Release Button
Battery Release button
Suction Adjustment Knob
Dust Cup
Dust Cup Cover Release Button
Tube Release Button
Telescopic Tube
Length Adjustment Button
Floor Brush Release Button
Electric Floor Brush
Anti-winding Roller
3.2 Digital LED Screen
Gear Indicator
AUTO Mode
Dust Full Indicator
EN
4
Battery Indicator
MAX Grade
Floor Brush Tangle
Indicator
Tip: The" " " "
icon will only be
displayed when
the vacuum is
blocked.
[email protected]
3.3 Accessory Usage
1. Crevice Brush
Suitable for cleaning small gaps such as
doors and windows, corner of stairs, etc.
2. 2 in 1 Brush
Suitable for cleaning sofas, seats, etc.
3. Floor Brush
Suitable for cleaning floor tiles, floors, as
well as short and medium hair carpets.
4. Cleaning Brush
Remove hair, rubbish, and micro dust from
the accessories or filters.
5. Install the Wall Mount
Snap the main unit into the wall mount from the middle position, and snap the flat suction
and sofa suction into the hanger slot from the bottom.
5
EN
[email protected]
4. ASSEMBLING
4.1 Install the Battery
• Slide forward in the direction of the arrow, and the lock is fastened on the rack.
4.2 Install the Dust Cup
• Align the protruding part of the main unit with the recessed part of the dust box, push it
forward.
4.3 Install the Machine
• 1: Connect the main body to the telescopic tube first, then install the brush.
Ka da
Ka da
• 2: Connect the main body to the brush directly.
Ka da
Ka da
EN
6
Ka da
[email protected]
5. CHARGING
5.1 Two Charging Ways
Note: Due to long-distance transportation, the power of the battery pack is
consumed, please fully charge it before using it for the first time.
1. The battery is installed on the vacuum cleaner. Plug the adapter to charge.
* When charging, the battery indicator on the display flashes green.
When the battery is fully charged, the battery indicator is always on green.
2. The battery could be charged separately without installing it in the vacuum cleaner. Plug
the adapter to charge.
* When charging, the lights on the battery pack flash blue.
When the battery is fully charged, the lights are always on blue.
3. Battery Power Indicator
25%
50%
75%
100%
7
EN
[email protected]
5.2 Low Battery Reminder
1. During the running process, the battery indicator flashes in red, reminding that the
battery power is low and the vacuum will be shut down later. Please charge in time.
2. After turning off the vacuum, the battery indicator flashes in orange, then flashes
slowly for 5s and goes out, indicating that the power is less than 25%, please charge it in
time.
5.3 Charging with Wrong Adapter
If a wrong adapter is being used, the battery indicator flashes red and goes out after 60s.
The input voltage/current does not match, which will cause damage to the battery pack.
Please replace the original adapter in time.
EN
8
[email protected]
6. USING
6.1 Start the Vacuum Cleaner
In the OFF state, press the ON/OFF button to start the vacuum cleaner.
6.2 Change Suction Grade
Rotate Clockwise after Power On or in AUTO Mode
Press the ON/OFF button to turn on the vacuum, AUTO will
display blue light. The vaccum works in AUTO mode, it can
automatically adjust the power according to the amount of
dust.
Turn the knob clockwise, and AUTO will display white light.
The vacuum enters the manual mode.(10 gears to choose in
manual mode)
When turn clockwise to the MAX mode, MAX will displays red
light.
When the vacuum is on MAX mode turn the knob
counterclockwise, the suction power reduces. When the
suction power back to lowest, it will be back into AUTO mode.
AUTO displays blue light.
9
EN
[email protected]
Rotate Counterclockwise after Power On or in AUTO Mode
Press the ON/OFF button to turn on the vacuum, AUTO will
display blue light. The vaccum works in AUTO mode, it can
automatically adjust the power according to the amount of
dust.
Adjust the knob counterclockwise, the vacuum enters the MAX
mode, and MAX will display red light.
In the MAX mode, continue to adjust counterclockwise, the
suction power reduces will in turn (10 gear can be adjusted).
When the vacuum is on MAX mode, turn the knob clockwise,
the suction power back to lowest, it will be back into AUTO
mode. AUTO displays blue light.
6.3 Adjust the Length of the Tube according to Different Needs
Press the button behind the tube and pull out the tube at the same time to extend the
tube.
Press the button and pull the tube back to shorten the tube.
EN 10
[email protected]
7. MAINTENANCE
7.1 Clean the Motor
Wipe the motor with a soft dry cloth.
7.2 Clean the Dust Cup and Filter
*It is recommended to clean once a week and replace it once every 2 months.
1. When the dust reaches the "MAX" mark
of the dust cup, please clean it up as soon
as possible, or it will affect the vacuuming
effect.
2. Press the dust cup cover release button
to open the cover and dump the garbage
into the trash can.
MAX
3. Pull back the button to remove the dust
cup.
4. Grab the HEPA filter handle to remove
the HEPA filter, sponge and stainless steel
filters.
5. Scrape the HEPA filter with a cleaning
brush.
6. Rotate the metal filter clockwise to
remove it from the filter holder.
7. Clean the dust cup, sponge and stainless
steel filter with water.
8. Leave it to completely dry before
installing to the vacuum.
1min
1min
11 EN
[email protected]
9. Rotate the HEPA filter, sponge and metal
filter counterclockwise into the dust cup.
10. Align the convex part of the main unit
with the concave part of the dust box, push
it forward, and hear a click "kada", finish
installation.
7.3 Clean the Air Filter
*It is recommended to clean once every six months and replace it once a year.
1.Rotate the air filter
counterclockwise to
remove it from the main
unit.
2.Scrape the HEPA filter
with a cleaning brush.
3.Rotate the air filter
clockwise to install it back
to the main unit.
7.4 Clean the Floor Brush
*Before removing the roller, please make sure that the floor brush has been separated from
the main unit, so as to avoid personal injury caused by accidentally starting the machine.
1.Push the switch up to the "unlocked" side, 2.Use the small cleaning tool to sweep
rotate the plug, and remove the roller brush. away and remove hairs and debris from the
rollers.
3.Put the left side of roller brush into the 4.After inserting the roller, press down the
floor brush first, then press the right side in. latch, hear a click "kada", finish installation.
EN 12
[email protected]
8. TROUBLESHOOTING
If there is any problem during use, please check the following troubleshooting table.
If the problem can't be solved, please contact the after-sales email: [email protected].
Warning:
Turn off the vacuum cleaner before maintenance. Otherwise it may
cause electric shock or other personal injury.
*When the vacuum cleaner does not work properly, the icon on the screen will light up in
red.
8.1 Air Channel/Dust Sensor Blocked
When the aluminum tube or dust cup is blocked, the vacuum stops working, cannot be
turned on within 10s, and the "
"shows red.
Solution: Clean the aluminum tube and the filters in the dust cup.
8.2 Brush Roller Tangled
If the floor brush inhales large foreign objects or entangles too much hair, it may cause the
drum to stop rotating, the LED lights on it flashe 3 times, and the "
" on screen shows
red.
Solution: Remove the floor brush and clean up the foreign matter wrapped around the
roller. Please ensure that the brush head has been detached from the main unit to prevent
accidental starting of the machine and cause personal injury.
13 EN
[email protected]
8.3 Common Trouble
Common Trouble
Possible Causes
Solutions
Vacuum can not work
1.Low battery power
2.Automatic protection
triggered by excessive
temperature due to blockage
3.Battery damaged
1.Charge before use
2.Clean the floor brushes,
dust suction ports or air
inlet filters, and restart after
cooling down
3.Replace a battery
Suction reduced
1.The dust cup is full of dust
2.The filters are full of dust
3.The telescopic tube or
brush inlet blocked
4.Low battery power
1.Empty the dust cup
2.Clean or change the filter
3.Remove blockage in tube
and brush inlet
4.Charge before use
Insufficient use time after
charging
1.Insufficient charging time
2.Battery aging
3.The dust cup is full of dust
4.The filters are full of dust
5.The telescopic tube or
brush inlet blocked
6.Always use the highest
speed to clean the whole
house
1. Recharge the battery
2.Change a battery
3.Empty the dust cup
4.Clean or change the filter
5.Remove blockage in tube
and brush inlet
6.For simple cleaning, it
is recommended to use
the lowest speed or the
medium speed. Only larger
garbage needs the highest
speed, which can effectively
prolong the battery life.
If the house is larger,
contact customer service
to get additional spare
batteries.
Battery indicator does not
light up when charging
1.Battery damaged
2.Screen damaged
3.Adaptor incorrectly
connected or damaged
1.Change a battery
2.Change the motor unit
3.Change the adaptor or
fully insert the charging
terminal into the battery
charging terminal
Not charging
1.Battery temperature is too
high or too low
2.The charger power light is
not on.
1.Please wait for the battery
temperature to return to
normal before charging
2.Charger not plugged in
EN 14
[email protected]
9. WARRANTY
BuTure cordless vacuum cleaner has a two-year warranty. You can contact our email via
[email protected] for after-sales support, we will reply you within 1 working day.
The warranty includes: free maintenance of the cordless stick vacuum, free replacement of
defective parts, including battery, filter, floor brush, dust container, charger and motor.
If any problems or malfunctions during use, please send your question and order number to
[email protected].
BuTure support specialist will answer you within 1 working day.
E-mail: [email protected]
15 EN
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CAN ICES-003 (B) / NMB-003 (B)
Cordless Stick Vacuum Cleaner
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Declaration of Conformity
We (Manufacturer is responsible for this declaration)
Ekoo Electronic Co., Ltd.
(Company name)
B09, block B, f2, bldg.b, runfeng Pioneer Park, no.973, minzhi Avenue, Minzhi St.,
Longhua, Shenzhen, CN
(Company address)
declare under our sole responsibility that the product
Trade name: BUTURE
Equipment: Vacuum Cleaner
Model No. : JR600
to which this declaration relates is in conformity with the essential requirement set
out in the Council Directive on the Approximation of the laws of the Member States
relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/
EU) product is responsible to affix CE marking, the following standards were applied:
EN 60335-2-2:2010+A11:2012+A1:2013
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN 62233:2008
EN 55014-1:2021
EN 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A2019
IEC62321-3-1:2013
IEC62321-4:2013
IEC62321-5:2013
IEC62321-6:2015
IEC62321-7-1:2015
IEC62321-7-2:2017
IEC62321-8:2017
Full Name: George.wang
Position: Approbation Manager
Signature: George.wang
Place/Date: Shenzhen,China/JUL.22-2022