DV8 OFFROAD SRBR-01 4 Door Rock Sliders Instruction manual

DV8 OFFROAD SRBR-01 is a set of high-quality 4-Door Rock Sliders designed specifically for the 2021+ Ford Bronco. These sliders provide superior protection for your vehicle's rocker panels and undercarriage from rocks, obstacles, and other off-road hazards. Constructed from durable steel, they feature a rugged design that can withstand even the most extreme conditions. DV8 Offroad's rock sliders are engineered to seamlessly integrate with your Bronco's body, offering a perfect fit and maximum protection without compromising ground clearance.

With DV8 OFFROAD SRBR-01, you can confidently tackle any terrain, knowing that your Bronco is shielded from damage. Whether you're navigating rocky trails, crawling over obstacles, or simply exploring the great outdoors, these rock sliders will provide the peace of mind you need to push your off-road adventures to the limit.

PDF

Document

6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
PRODUCT
INSTALLATION MANUAL
4-Door Rock Sliders
2021+ FORD BRONCO
SRBR-01
TOOLS REQUIRED
SKILL LEVEL
TIME REQUIRED
- 15mm Socket
- 10” Socket Extension
- Novice/Intermediate
- 2 people
- 1 Hour
Some skill level required.
Additional help will be needed for
this install
Time to install this should
take about an hour
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit — Read and understand all
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner’s manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
NEED HELP?
855-680-9595
INSTALLATION MANUAL
STEP 1
Begin by unpacking all items and
inspecting for missing pieces or
damage. If you have any concerns,
please contact the company the
product was purchased from.
STEP 2
Remove any factory sliders, steps,
or rock rails if equipped since they
cannot be used with our sliders.
Broncos with factory equipped
rock sliders will have brackets for
mounting on the underside of the
vehicle, these can remain on or be
removed with our sliders using a
13mm socket.
STEP 3
On the front body mount, use a 15mm
socket to remove the two bolts just
outside of the main body mount bolt.
When bolt bolts are removed, and
small metal plate will become free.
Remove this plate and set off to the
side since it will not be reused.
NEED HELP?
855-680-9595
INSTALLATION MANUAL
STEP 4
Remove the two outside bolts on
the rear body mount using a 15mm
socket.
STEP 5
With additional help, hold the slider
up to the body mounts so that slider
is positioned over the studs. (Large
mount on slider will be used on
the rear mount) Using the factory
hardware tighten the nuts to 50ft lbs.
Note: You will need to use at minimum a
10” extension to reach to the nuts on the
rear mount.
NEED HELP?
855-680-9595
INSTALLATION MANUAL
STEP 6
Double check all hardware is secure,
and the sliders are tight.
NEED HELP?
855-680-9595
">

Hello! I am an AI chatbot specifically trained to assist you with the DV8 OFFROAD SRBR-01 Instruction manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts