Radio Shack | Weatheradio | User`s guide | Radio Shack Weatheradio User`s guide

Digital AM/FM/WX Radio
Thank you for purchasing your Digital
AM/FM/WX (Weather) Radio from RadioShack.
It provides excellent AM and FM radio reception
and local weather information. You can store up to
20 radio stations and access them with the touch
of a button.
STATION PRESETS — To hear a preset station, press the
STATION PRESET button corresponding to a frequency
saved in that location. Press the button twice to
access stations 6-10.
The clock is the default display. PM appears for
afternoon time.
1. Hold down MEMORY SET until you hear a beep.
The hour digits flash.
2. Rotate TUNER/SEEK to adjust the hour, and press
MEMORY SET to confirm. The minutes flash.
3. Rotate TUNER/SEEK to adjust the minutes, and
then press MEMORY SET to confirm. A beep
sounds to confirm the time is set.
You can power your radio with AC power or with
batteries. The attached AC power cord’s plug is
polarized and fits into AC power outlets only one
way. If the plug does not fit your outlet, turn the
plug over and try reinserting it. If it still does not
fit, contact a qualified electrician to change your
outlet, or use a different AC outlet.
1. Remove
the battery
2. Extend the AC
power cord and
plug it into a
standard 120V
AC outlet. Or,
insert four size C batteries according to the
polarity markings in the compartment.
RADIO/CLOCK — Press to toggle
between radio and clock mode.
DYNAMIC BASS — Press to activate the dynamic bass
(DBS). DBS appears on the display when DBS is on.
VOLUME — Turn clockwise until it clicks to turn on the
radio. Then, rotate to your desired listening level.
TUNER/SEEK — Rotate to adjust the hour and minutes
in clock mode. Rotate to search for a radio station in
radio mode.
BAND — Press to listen to
AM, FM, or WX radio.
MEMORY SET — Hold down to enter clock setting mode. Then, press to confirm your
hour and minutes settings. In radio mode, tune to the desired frequency, and then
hold down MEMORY SET to save the frequency in a desired location (1-10).
Please read this user’s guide before
installing, setting up and using your new product
3. Replace the cover.
WARNING: To reduce the risk of fire or shock hazard, do not
expose this product to rain or moisture.
This symbol is intended to alert you to the presence of
uninsulated dangerous voltage within the product’s enclosure
that might be of sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
This symbol is intended to inform you that important
operating and maintenance instructions are included in the
literature accompanying this product.
Note: Actual product may vary
from the images found in this
user’s guide
You can use headphones (not supplied) to listen to
your radio privately. Insert the headphone’s plug into
the jack on the side of your radio.
Listening Safely
Follow these guidelines when you use headphones.
• Set volume to its lowest level before listening. After
you begin listening, adjust volume to a comfortable
listening level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to
permanent hearing loss.
• Once you set the volume, do not increase it. Over
time, your ears adapt to the volume, so a volume
level that does not cause discomfort might still
damage your hearing.
1. Turn on your radio. The display lights blue if
you are using AC power. The display lights for
a few seconds if using battery power.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Digital AM/FM/WX Radio
Responsible Party:
100 Throckmorton
Fort Worth, TX 76102
The FCC Wants You to Know
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
presetting stations
1. Turn on your radio.
2. Press BAND to select AM or FM band.
Extend the antenna and adjust for best
3. Tune to the desired station.
4. Hold down MEMORY SET until a beep sounds. A
Press BAND to select AM or FM or WX band.
number (1-10) flashes on the display.
Rotate VOLUME to a comfortable listening level.
5. Press a STATION PRESET button to save the station
Rotate TUNER/SEEK to tune to a radio station. Or,
in that location.
hold down TUNER/SEEK until a beep sounds to
automatically search for stations (AM/FM only). 6. Press MEMORY SET. A beep sounds to confirm. If
no button is pressed within 15 seconds of the
STEREO appears on the display when you tune to
beep, the station will not be stored.
an FM station broadcasting in stereo.
Rotate VOLUME counterclockwise until it clicks to 6. To listen to preset stations, press the
corresponding STATION PRESET button.
turn off the radio.
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult your local RadioShack store or an experienced radio/TV
technician for help.
If you cannot eliminate the interference, the FCC requires that you
stop using your radio. Changes or modifications not expressly
approved by RadioShack may cause interference and void the
user’s authority to operate the equipment.
Frequency range:
AM ............................................................ 530 to 1710Khz
FM ......................................................... 87.5 to 108.1MHz
Weather (Wx) ....................................162.4 to 162.55 MHz
Power supply: ............................................120V AC 60Hz
DC6V (4 C size batteries)
Headphone: ............................................ 3.5mm diameter
Speaker max. output: .......................250mW per channel
This product is warranted by RadioShack against manufacturing defects in material
and workmanship under normal use for ninety (90) days from the date of purchase
from RadioShack company-owned stores and authorized RadioShack franchisees
and dealers. For complete warranty details and exclusions, check with your local
RadioShack store.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
©2004. RadioShack Corporation.
All rights reserved. RadioShack and are trademarks
used by RadioShack Corporation.
Printed in China
Download PDF