KICHLER 19 1 2 Inch High Outdoor Wall Light Instruction manual

Wall Light Installation Instructions
C
A
B
D
Option 1
Option 2
Option 1 - In-line switch and plug.
Ensure the electrical supply is turned OFF at the fuse board.
1.
Identify if there are any hidden pipes or electrical cables in the wall to avoid causing damage or risk of
electrical shock during installation. Mark the wall where the light needs to be positioned and drill two holes
where you have marked (A). Determine the fixing method appropriate to the wall structure and secure the
back plate to the wall using the screws provided, concealing the screws with the wooden plugs provided
(B). Screw in your chosen light bulb and plug the light into the nearest outlet. The light has been designed
to work with an E27 LED light bulb, up to a maximum of 25 Watts.
2.
Turn the power supply on to complete installation.
Option 2 - Hard wired.
Only qualified persons should assemble the luminaire. If in doubt, consult a suitably qualified person.
Installation MUST be carried out in accordance and compliance with current building regulations.
Ensure the electrical supply is turned OFF at the fuse board.
Using the connection box provided, connect the light to the isolated electricity supply (C) (220-240V
1.
AC 50-60Hz). Push the flex from the bottom of the light into the slot on the bottom of the back plate to
ensure it sits flat against the wall (D). Coil the remaining cable and connection block into the recess
of the back plate.
2.
Attach the light to the wall in same way as detailed for option 1 and screw in your chosen light bulb. The
3.
Turn the power supply on to complete installation.
light has been designed to work with an E27 LED light bulb, up to a maximum of 25 Watts.
FOR INDOOR USE ONLY
*** If any part of the assembly is damaged it must be returned to the seller for repair or replacement***
*** If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his
service agent or a similar qualified person in order to avoid a hazard. ***
For more information on the installation of your product:
[email protected]
+44 (0)1326 722725