Calibre UK | HQView-100S | Powerful blending and warping simplified

www.optoma.co.uk
HQView320/325/520/530
Projector edge blending and image warping
DISTRIBUITI DA:
VIA PLINIO, 43 - 20129 MILANO (MI)
T. 02 87166000, 06 92938446
F. 02 87153173
E. info@agmultivision.it
W. www.agmultivision.it
Powerful blending
and warping
simplified
The Optoma blending products, powered by industry leading technology from Calibre provides best-in-class blending
and warping projection solutions. The unique collaboration between Optoma and Calibre ensures that traditionally time
consuming and complex blending and warping projects are greatly simplified, reducing setup time.
HQView Series
Edge blending explained
Some applications call for an image that is brighter and higher resolution than can be provided by one projector. In this
situation a single image can be created from multiple projectors but unless done well the image will show visible bands where
the projected images overlap
Edge-blending technology solves this problem by eliminating the visible banding and creating a single bright, high resolution
image across the screen.
Single projector, single image
Single image, two projectors - image is bright but has
a band because the image is not blended
Single image, two blended projectors A bright, high resolution image with no band
HQView Series
Edge blending multiple projectors in an array makes it possible to create very bright, high-resolution very wide
projection displays. By using the HQView320/325 or HQView520/530 you can precisely control multiple, edge-blended
images seamlessly, quickly and easily.
HQView320/325 and HQView520/530
Designed with the end-user applications in mind, the HQView Series let’s you expertly edge-blend multiple, curved images
seamlessly, on all four sides, for an unlimited number of projectors. Precisely control edge-blended images and warp displays
to fit almost any projection surface – flat or curved.
The Optoma Advantage
Traditionally blending solutions are time-consuming and complicated to set up with many incompatibilities between blending
solutions and projectors. The Optoma blending solution removes this issue. Each Optoma ProAV projector model has been
painstakingly tested with the HQView320/325/520/530 and a series of optimised presets developed that greatly reduces the
complexity and time required to setup blending projects.
If you do require help with your blending project, uniquely, the industry leading Optoma ProAv support team is on hand
to support your complete blending project – the blending boxes and the projectors as a single system. This greatly simplifies
the support process for you and enables us to assist you get your blending projects back on track quickly and efficiently.
For more than ten years Optoma has been one of the world’s foremost projector designers and manufacturers - amongst the
very few companies that focus exclusively on projectors.
Today the Optoma range represents the evolution of projection expertise, honed and refined by manufacturing and supporting
millions of projectors the world over. This knowledge and skill has been distilled into our products and support services which
are designed specifically for demanding professional applications.
99 Higher education
99 Lecture theatres
99 Houses of worship
99 Museums
99 Auditoriums
99 Boardrooms
99 Broadcast studios
99 Large classrooms
99 Exhibitions
99 Conference rooms
99 Digital signage
99 Stage shows
99 Live events
99 Projection Mapping
99 Meeting rooms
99 Post production
99 Theatre
99 Trade shows
HQView320
HQV320
Harnessing the power of the Reon™ video processor from IDT, running state of the art HQV algorithms with expertly designed
hardware and firmware from Calibre, HQView320 is a compact yet high performance image scaler with HDMI/DVI/Component/VGA
input capability and HDMI/DVI output which provides stunning image quality for professional, broadcast and corporate AV users.
HQView320 includes 4-sided soft edge blend for seamless blending of multiple projectors and flexible geometry correction
functions able to correct image shape and projector misalignment by dragging and dropping each image corner, or by pin,
barrel, rotation, or by keystone and rotation.
Full warp mapping is also supported by HQView320. A flexible and intuitive PC application is included for easy warp map
creation, or third-party generated warp maps can also be processed from automatic image alignment systems making
HQView320 ideal for dual overlaid projector alignment in 3D projection systems.
•
•
•
•
•
•
•
•
•
•
•
•
Best in class professional image processing in a compact
affordable module
Superior de-interlacing reduces image flicker and artefacts
Remove picture noise from poor quality video sources,
improve image detail
Powerful geometry correction for off-axis projection, pin/
barrel and image rotation
4-Sided soft edge blend for tiling multiple projectors
to produce large images
Flexible warp mapping for curved screen projection,
simulation and 3D alignment
HDMI, DVI, VGA Analog, Component inputs for signals
up 1080p & WUXGA
HDMI/DVI output up to 1080p/WUXGA
Flexible color calibration controls
Gamma controls
10-bit signal inputs, 12-bit internal processing
Selectable processing versus latency: best picture and low
latency modes
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Latency as low as 0.25-frame progressive inputs,
1.25-frames interlaced inputs
USB port for in-field firmware updates
Programmable customer logo on menu
TCP/IP remote control and Web Server
Easy to navigate self-explanatory OSD menus
Motion adaptive per pixel video de-interlacing, HD & SD
Multi-directional diagonal de-interlace filter
Automatic 3:2 & 2:2 pull-down detection with automatic
film/video/video over film detection
Chroma and Luma transient improvement
Edge anti-aliasing
4-field full resolution SD & HD processing
4D Motion, Noise Adaptive HQV noise reduction for spatial
and temporal noise
Codec noise reduction for mosquito and block
compression noise
Powerful geometry correction capabilities
Image rotation, pin/barrel correction
4-Sided soft edge blend
Flexible warp mapping
HQView320
Inputs
Outputs
1x Component analog video YPbPr(S) or RGBS/RGsB
via 3 or 4 x BNC jack
1x DVI/HDMI with HDCP
1x DVI/HDMI with HDCP via DVI-I connector, supports HDMI with
HDCP, 8/10/12 bit video compatible
1x DVI/HDMI with HDCP via DVI-I connector, supports HDMI with
HDCP, 8/10/12 bit video compatible
1x VGA analog via DVI-I connector (common with DVI/HDMI input
1x VGA analog via DVI-I connector (common with DVI/HDMI input)
Supported video formats:
Supported Output formats:
HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30,
1080p30, 1080p59.94, 1080p60
Common VESA formats from 640x480 to 1920x1200, 720p, 1080p
Selectable I/O lock mode, or frame rate conversion mode
ED 480p, 576p
Selectable aspect ratio conversion, or incoming aspect ratio
preserve mode
(HDMI with deep color 8/10/12 bit support, via DVI connector.)
SD 625i (576i), 525i (480i)
Common Vesa graphics formats from 640x480 to 1920x1200
(with reduced blanking for 1920x1200 and 1600x1200 modes)
User Controls
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool.
Keypad for OSD menu access
USB port for uploading software updates and new features.
Power Requirements
12VDC@approx 1.5A, external 100-265VAC PSU included.
Warranty
3-years return to base warranty covers parts and labour,
shipping excluded.
HQView model >
320
325
520
530
Front LCD menu or OSD control
OSD
OSD
OSD
LCD
x
DVI/HDMI Inputs
x
x
x
Component Input
x
x
x
x
Composite/S-Video Inputs
-
-
x
x
VGA Analog Input
x
x
x
x
HD-SDI Input
-
-
-
-
3G-SDI Input
-
-
x
x
DVI/HDMI Output
x
x
x
x
VGA Analog Output
-
-
x
x
3G-SDI Output
-
-
x
x
3G-SDI Audio embed/de-embed
-
-
x
x
HQV Processing
x
x
x
x
PIP/POP/PAP
-
-
x
x
TCP/IP Control
x
x
x
x
Low Latency Mode
x
x
x
x
Flicker Filter for Interlaced Output Modes
-
-
x
x
Geometry Correction, 4-Corner, Rotate
x
x
x
x
Genlock (V-Lock)
-
-
x
x
Pan, Zoom, Tilt
x
x
x
x
Edge Blending
x
x
x
x
Edge Blend Black Level Correction
-
x
x
x
Auto pan/zoom/tilt of content for blending
x
x
x
x
Projection Mapping/Warp
x
x
x
x
HQView325
HQV™ Scaler with Warp Mapping
Edge Blend & HDMI/DVI In/Out
Harnessing the power of the ReonTM video processor running state of the art HQVTM algorithms with expertly designed
hardware and firmware from Calibre, HQView325 is a highly flexible warp and blend scaler for professional, broadcast and
corporate AV users.
HQView325 features 4-sided soft edge blend with multi-region black level correction for seamless blending of multiple
projectors. It also includes flexible geometry correction functions able to correct image shape and projector misalignment by
dragging and dropping each image corner, or by pin/barrel, rotation or by keystone and rotation.
Full warp mapping is also supported by HQView325. A PC application is included for easy warp map creation or third-party
generated warp maps can also be processed from automatic image alignment systems making HQView325 ideal for stacked
projector alignment and curved screen multi-projector tiling.
HQView325 has digital I/O compatible with DVI and HDMI including deep colour support.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Best in class professional image processing in a compact
affordable 1U format
Improve video image quality with better detail and clarity
Powerful geometry correction for off-axis projection, pin/
barrel, image rotation
4-Sided soft edge blend for tiling multiple projectors to
produce large images
Flexible warp mapping for curved screen projection,
simulation and 3D alignment
HDMI, DVI & VGA inputs with signal compatibility up to
1080p & WUXGA
•
•
•
•
•
•
4-field full resolution SD & HD processing
•
•
•
•
•
•
•
•
4D Motion, Noise Adaptive HQV noise reduction for spatial
and temporal noise
•
HDMI/DVI multifunction output
Motion adaptive per pixel video de-interlacing, HD & SD
Multi-directional diagonal de-interlace filter
Automatic 3:2 & 2:2 pull-down detection with automatic
film, video and video over film detection
Chroma and Luma transient improvement
Edge anti-aliasing
Codec noise reduction for mosquito and block
compression noise
Direct input selection keys allow input selection without
using menu system
Flexible colour calibration controls
Gamma controls
Selectable processing versus latency: best picture and low
latency modes
Latency as low as 0.25-frame progressive inputs,
1.25-frames interlaced inputs
I/O Lock and Free Run selectable output modes
USB port for in-field firmware updates
Programmable customer logo on menu
TCP/IP remote control and Web Server
Easy to navigate self-explanatory OSD menus
Powerful geometry correction capabilities
Pan, Zoom, Tilt Image rotation, pin/barrel correction
4-Sided edge blend with 48-bit processing & multi-region
black level correction
Flexible warp mapping
HQView325
Inputs
Outputs
1x HDMI with HDCP support, 8/12 bit deep colour compatible.
Audio de-embed from HDMI of SPDIF compatible formats
1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12 bit
support, via DVI connector)
1x DVI with HDCP support
1x S/PDIF digital audio via RCA
1x VGA Analog via 15HDD
Supported Output formats:
Supported video formats:
DVI/VGA common VESA formats 640x480 to 1920x1200, 720p, 1080p
HD 720p, 1080i, 1080psf, 1080p23.97/24/25/30, 1080p30,
1080p50, 1080p59.94, 1080p60
Selectable I/O lock or frame rate conversion mode
Selectable aspect ratio conversion
ED 480p, 576p
SD 625i (576i), 525i (480i)
User Controls
Common VESA graphics formats from 640x480 to 1920x1200
(with reduced blanking for 1920x1200 and 1600x1200 modes)
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool
Keypad for direct input selection and control of common
adjustments as well as OSD menu access.
USB port for uploading software updates and new features
Power Requirements
100-264VAC, 35W typical
Warranty
3-years return to base warranty covers parts and labour.
HQView model >
320
325
520
530
Front LCD menu or OSD control
OSD
OSD
OSD
LCD
x
DVI/HDMI Inputs
x
x
x
Component Input
x
x
x
x
Composite/S-Video Inputs
-
-
x
x
VGA Analog Input
x
x
x
x
HD-SDI Input
-
-
-
-
3G-SDI Input
-
-
x
x
DVI/HDMI Output
x
x
x
x
VGA Analog Output
-
-
x
x
3G-SDI Output
-
-
x
x
3G-SDI Audio embed/de-embed
-
-
x
x
HQV Processing
x
x
x
x
PIP/POP/PAP
-
-
x
x
TCP/IP Control
x
x
x
x
Low Latency Mode
x
x
x
x
Flicker Filter for Interlaced Output Modes
-
-
x
x
Geometry Correction, 4-Corner, Rotate
x
x
x
x
Genlock (V-Lock)
-
-
x
x
Pan, Zoom, Tilt
x
x
x
x
Edge Blending
x
x
x
x
Edge Blend Black Level Correction
-
x
x
x
Auto pan/zoom/tilt of content for blending
x
x
x
x
Projection Mapping/Warp
x
x
x
x
HQView520
HQV520
Harnessing the power of the ReonTM video processor from IDT, running state of the art HQV algorithms with expertly
designed hardware and firmware from Calibre, HQView520 is a highly flexible image scaler and scan converter which provides
stunning image quality for professional, broadcast and corporate AV users.
HQview520 features 4-sided soft edge blend for seamless blending of multiple projectors and includes flexible geometry
correction functions able to correct image shape and projector misalignment by dragging and dropping each image corner,
or by pin/barrel, rotation or by keystone and rotation.
Full warp mapping is also supported by HQView520. A PC application is included for easy warp map creation or third-party
generated warp maps can also be processed from automatic image alignment systems making HQView520 ideal for dual
overlaid projector alignment in 3D systems.
HQView520 has 3G-SDI input and out connectivity with backwards compatibility with HDSDI and SDSDI. A Genlock input
is provided for studio/staging, compatible with bi or tri-level sync or black & burst.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Best in class professional image processing in a compact
affordable 1U format
Use as a routing switcher and universal interface for
3G-SDI, HD-SDI, DVI or HDMI switching and distribution
systems, projectors and displays
Improve video image quality with better detail and clarity
Superior de-interlacing reduces image flicker and artefacts
Remove picture noise from poor quality video sources
Powerful geometry correction for off-axis projection, pin/
barrel, image rotation
4-Sided soft edge blend for tiling multiple projectors to
produce large images
Flexible warp mapping for curved screen projection,
simulation and 3D alignment
Genlock and I/O Lock for in-camera and edge blend use
3G-SDI, HDMI, DVI, VGA Analog, Component YPbPr,
RGsB/RGBS, Composite & S-Video inputs with signal
compatibility up to 1080p & WUXGA
3G-SDI, HDMI/DVI & VGA Analog outputs
Motion adaptive per pixel video de-interlacing, HD & SD
Multi-directional diagonal de-interlace filter
Automatic 3:2 & 2:2 pull-down detection with automatic
film, video and video over film detection
Chroma and Luma transient improvement
Edge anti-aliasing
4-field full resolution SD & HD processing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4D Motion, Noise Adaptive HQV noise reduction for spatial
and temporal noise
Codec noise reduction for mosquito and block
compression noise
Direct input selection keys allow input selection without
using menu system
Flexible color calibration controls
Gamma controls
10-bit signal inputs, 12-bit accurate internal processing
Selectable processing versus latency: best picture and low
latency modes
Latency as low as 0.25-frame progressive inputs,
1.25-frames interlaced inputs
I/O Lock, Genlock/Frame Sync and Free Run selectable
output modes
Flicker filter for interlaced output modes
USB port for in-field firmware updates
TCP/IP remote control and Web Server
Easy to navigate self-explanatory OSD menus
Powerful geometry correction capabilities
Pan, Zoom, Tilt
Image rotation, pin/barrel correction
4-Sided soft edge blend
Flexible warp mapping
HQView520
Inputs
Outputs
2x Composite Video CVBS (NTSC, PAL & SECAM),
1x 3G-SDI
1x via BNC jack and 1x via Cinch/RCA
1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12
bit support, via DVI connector)
1x YC/S-Video via 4 pin mini DIN
1x Component analog video YPbPr(S) or RGsB/RGBS
via 3 or 4 x BNC jack
1x VGA Analog via 15HDD
1x HDMI with HDCP, 8/10/12 bit video compatible, 10-bit internal
processing depth. Audio strip-off of SPDIF compatible formats
NB: 3G-SDI and VGA Analog outputs are disabled with HDCPencrypted input. Not all outputs are available simultaneously
1x DVI with HDCP
Supported Output formats:
1x S/PDIF digital audio via RCA
DVI/VGA common VESA formats 640x480 to 1920x1200, 720p, 1080p
1x VGA Analog via 15HDD
1 x 3G-SDI, accepts 3G, HD and SD SDI signals via BNC supports
4:2:2 and 4:4:4 formats with audio de-embed
3G-SDI in SMPTE formats 480i, 576i, 720p, 1080i, 1080p with
selectable audio embed
Selectable Genlock (V-Lock), I/O lock or frame rate conversion mode
1x Genlock (V-Lock) input via BNC, accepts bi-level, tri-level sync
or black & burst, 50/59.94/60Hz formats
Selectable aspect ratio conversion
Supported video formats:
outputs (edge blend not available in this mode)
HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30,
1080p30, 1080p50, 1080p59.94, 1080p60
User Controls
ED 480p, 576p (not via SDI)
Selectable vertical temporal filter for flicker reduction of interlaced
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool
SD 625i (576i), 525i (480i)
Keypad for direct input selection and control of common
adjustments as well as OSD menu access.
Common VESA graphics formats from 640x480 to 1920x1200
(with reduced blanking for 1920x1200 and 1600x1200 modes)
USB port for uploading software updates and new features
Multi standard support for CVBS & YC in PAL, NTSC, SECAM
formats with selectable 3D comb for composite
Power Requirements
100-264VAC, 35W typical
Note: PIP and edge blend are mutually exclusive so cannot
be used simultaneously
Warranty
3-years return to base warranty covers parts and labor,
shipping excluded.
HQView model >
320
325
520
530
Front LCD menu or OSD control
OSD
OSD
OSD
LCD
x
DVI/HDMI Inputs
x
x
x
Component Input
x
x
x
x
Composite/S-Video Inputs
-
-
x
x
VGA Analog Input
x
x
x
x
HD-SDI Input
-
-
-
-
3G-SDI Input
-
-
x
x
DVI/HDMI Output
x
x
x
x
VGA Analog Output
-
-
x
x
3G-SDI Output
-
-
x
x
3G-SDI Audio embed/de-embed
-
-
x
x
HQV Processing
x
x
x
x
PIP/POP/PAP
-
-
x
x
TCP/IP Control
x
x
x
x
Low Latency Mode
x
x
x
x
Flicker Filter for Interlaced Output Modes
-
-
x
x
Geometry Correction, 4-Corner, Rotate
x
x
x
x
Genlock (V-Lock)
-
-
x
x
Pan, Zoom, Tilt
x
x
x
x
Edge Blending
x
x
x
x
Edge Blend Black Level Correction
-
x
x
x
Auto pan/zoom/tilt of content for blending
x
x
x
x
Projection Mapping/Warp
x
x
x
x
HQView530
Universal HQV™ Scaler–Switcher-Scan Converter with Warp Mapping, Edge Blend & 3G-SDI In/Out and
LCD display for fast easy set-up in the field.
Harnessing the power of the Reon™ video processor running state of the art HQVTM algorithms with expertly designed
hardware and firmware from Calibre, HQView530 is a universal image scaler and scan converter which provides stunning
image quality for professional, broadcast and corporate AV users.
HQView530 features 4-sided soft edge blend with multi-region black level correction for seamless blending of multiple
projectors and includes flexible geometry correction functions able to correct image shape and projector misalignment by
dragging and dropping each image corner, or pin/barrel, rotation or keystone and rotation.
Full warp mapping is also supported by HQView530. A PC application is included for easy warp map creation or third-party
generated warp maps can also be processed from automatic image alignment systems.
HQView530 has 3G-SDI input and out connectivity with backwards compatibility with HDSDI and SD-SDI. For in-camera use
a Genlock input is provided for compatible with bi or tri-level sync or black & burst.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Best in class professional image processing in a compact
affordable 1U format
Front panel jog-wheel and LCD display for fast easy set-up
in the field
Use as a routing switcher and universal interface for
3G-SDI, HD-SDI, DVI or HDMI switching and distribution
systems, projectors and displays
Improve video image quality with better detail and clarity
Superior de-interlacing reduces image flicker and artefacts
Remove picture noise from poor quality video sources
Powerful geometry correction for off-axis projection, pin/
barrel, image rotation
4-Sided soft edge blend for tiling multiple projectors to
produce large images Flexible warp mapping for curved
screen projection, simulation and 3D alignment
Genlock and I/O Lock for in-camera and edge blend use
3G-SDI, HDMI, DVI, VGA Analog, Component YPbPr,
RGsB/RGBS, Composite & S-Video inputs with signal
compatibility up to 1080p & WUXGA
3G-SDI, HDMI/DVI & VGA Analog outputs
Motion adaptive per pixel video de-interlacing, HD & SD
Multi-directional diagonal de-interlace filter
Automatic 3:2 & 2:2 pull-down detection with automatic
film, video and video over film detection
Chroma and Luma transient improvement
Edge anti-aliasing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4-field full resolution SD & HD processing 4D Motion, Noise
Adaptive HQV noise reduction for spatial and temporal
noise
Codec noise reduction for mosquito and block
compression noise
Direct input selection keys allow input selection without
using menu system
Flexible colour calibration controls
Gamma controls 10-bit signal inputs, 12-bit accurate
internal processing
Selectable processing versus latency: best picture and low
latency modes
Latency as low as 0.25-frame progressive inputs,
1.25-frames interlaced inputs
I/O Lock, Genlock/Frame Sync and Free Run selectable
output modes
Flicker filter for interlaced output modes
USB port for in-field firmware updates
TCP/IP remote control and Web Server
Easy to navigate self-explanatory front panel menus
Powerful geometry correction capabilities
Pan, Zoom, Tilt Image rotation, pin/barrel correction
4-Sided edge blend with 48-bit processing & multi-region
black level correction Flexible warp mapping
HQView530
Inputs
Outputs
1 x HDMI with HDCP, 8/10/12 bit video compatible, 10-bit internal
processing depth. Audio strip-off of SPDIF compatible formats.
1x 3G-SDI
1 x DVI with HDCP
1x DVI/HDMI with HDCP (HDMI with deep colour 8/10/12 bit
support, via DVI connector)
1 x VGA Analog via 15HDD
1x VGA Analog via 15HDD
1 x 3G-SDI, accepts 3G, HD and SD SDI signals via BNC supports
4:2:2 and 4:4:4 formats with audio de-embed
1x S/PDIF digital audio via RCA
2 x Composite Video CVBS (NTSC, PAL & SECAM),
1 x via BNC jack and 1x via Cinch/RCA
NB: 3G-SDI and VGA Analog outputs are disabled with HDCPencrypted input. Not all outputs are available simultaneously
Supported Output formats:
1 x YC/S-Video via 4 pin mini DIN
DVI/VGA common VESA formats 640x480 to 1920x1200, 720p, 1080p
1 x Component analog video YPbPr(S) or RGsB/RGBS via
3 or 4 x BNC jack
3G-SDI in SMPTE formats 480i, 576i, 720p, 1080i, 1080p with
selectable audio embed
Supported video formats:
Selectable Genlock (V-Lock), I/O lock or frame rate conversion mode
HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30,
1080p30, 1080p50, 1080p59.94, 1080p60
Selectable aspect ratio conversion
ED 480p, 576p (not via SDI)
SD 625i (576i), 525i (480i)
Common VESA graphics formats from 640x480 to 1920x1200 (with
reduced blanking for 1920x1200 and 1600x1200 modes)
Selectable vertical temporal filter for flicker reduction of interlaced
outputs (edge blend not available in this mode)
Note: PIP and edge blend are mutually exclusive so cannot be used
simultaneously
User Controls
Front panel jog-wheel and LCD menu display for fast set-up.
Multi standard support for CVBS & YC in PAL, NTSC, SECAM
formats with selectable 3D comb for composite
Keypad for direct input selection.
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool
USB port for uploading software updates and new features
Power Requirements
100-264VAC, 35W typical
Warranty
3-years return to base warranty covers parts and labour.
HQView model >
320
325
520
530
Front LCD menu or OSD control
OSD
OSD
OSD
LCD
x
DVI/HDMI Inputs
x
x
x
Component Input
x
x
x
x
Composite/S-Video Inputs
-
-
x
x
VGA Analog Input
x
x
x
x
HD-SDI Input
-
-
-
-
3G-SDI Input
-
-
x
x
DVI/HDMI Output
x
x
x
x
VGA Analog Output
-
-
x
x
3G-SDI Output
-
-
x
x
3G-SDI Audio embed/de-embed
-
-
x
x
HQV Processing
x
x
x
x
PIP/POP/PAP
-
-
x
x
TCP/IP Control
x
x
x
x
Low Latency Mode
x
x
x
x
Flicker Filter for Interlaced Output Modes
-
-
x
x
Geometry Correction, 4-Corner, Rotate
x
x
x
x
Genlock (V-Lock)
-
-
x
x
Pan, Zoom, Tilt
x
x
x
x
Edge Blending
x
x
x
x
Edge Blend Black Level Correction
-
x
x
x
Auto pan/zoom/tilt of content for blending
x
x
x
x
Projection Mapping/Warp
x
x
x
x
HQView320/325/520/530
Automatic Geometric Alignment
The HQView320/325/520/530 are Scalable Ready certified meaning that they can be used
with Scalable Display Technologies products for automatic geometric alignment of displays.
This software-driven, camera-based system automatically aligns displays with unsurpassed
accuracy and speed, further simplifying the setup of blending and warping projects.
Worldwide technical and commercial support
Optoma Europe
Optoma Scandinavia
Optoma Europe Ltd.
Optoma Scandinavia
42 Caxton Way
The Watford Business Park
Watford
Hertfordshire
WD18 8QZ
UK
Tel: +44 (0) 1923 691 800
Fax: +44 (0) 1923 691 888
Lerpeveien 25
Postboks 9515 Åskollen
3038 Drammen
Norway
Tel: +47 32 98 89 90
Fax: +47 32 98 89 99
Optoma Deutschland GmbH
Optoma USA Headquarters
WIESENSTRASSE 21
D40549 Düsseldorf
Germany
Tel: +49 (0) 211 506 6670
Fax: +49 (0) 211 506 66799
3178 Laurelview Ct.
Fremont, CA 94538
Tel: (510) 897-8600
Fax: (510) 897-8601
Optoma USA
Atlanta Sales Office
Optoma France
Batiment E
81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt
France
Tel. : +33 (0) 1 41 46 12 20
Fax: +33 (0) 1 41 46 94 35
Optoma Spain
C/ José Hierro,36 Of. 1C
28529 Rivas VaciaMadrid
Madrid
Spain
Tel: +34 91 499 06 06
Fax: + 34 91 670 08 32
Optoma Benelux
Optoma Benelux BV
Randstad 22-123
1316 BW Almere
The Netherlands
T: +31 (0) 36 820 0252
F: + 31 (0)36 548 9052
Local Representatives
Turkey
UAE
Poland
Russia
Italy
7000 Central Park NE, Suite 570,
Atlanta, GA 30328
Tel: (678) 281-2228
Fax: (770) 399-3035
Canadian Sales Office
2420 Meadowpine Blvd, Suite 105,
Mississauga, ON L5N 6S2, CANADA
Tel: (905) 285-0685
Optoma Asia
Taiwan
Optoma Corporation
Taipei Office
5F., No. 108, Minchiuan Rd. , Shindian City, Taipei
Taiwan 231, R.O.C.
Tel::+886-2-2218-2360
Fax::+886-2-2218-2313
http://www.optoma.com.tw
Taichung Office
7F-5, No.3, Lane 2, 1st Rd, Taichung Industrial
Park, Xitun Dist., Taichung City, 40767, Taiwan,
R.O.C.
Tel::+886-4-3505-0336
Fax::+886-4-3505-0338
Kaohsiung Office
Rm. D, 7F, No.108, Zhonghua 3rd Rd., Qianjin
Dist., Kaohsiung City 80145, Taiwan, R.O.C.
Tel::+886-7-952-5689
Fax::+886-7-241-2197
China
Shanghai Office
5F, No. 1205 Kaixuan Road, Changning District ,
Shanghai
Tel: +86-21-6294-7376
Fax: +86-21-6294-7375
http://www.optoma.com.cn
Beijing Office
20D apartment 3, Build No.3, Yindu Tower, No 48
ZhiChun road, HaiDian district, Beijing
Tel: +86-10-5873-1919
Fax: +86-10-5873-1919 *8018
ShenYang Office
Room1201, building C3, Wulihe Tower, No 4-1
WenTi road, HePing district, ShenYang
Tel::+86-024-3188-7018
Fax::+86-024-3188-7018-808
Xi’an Office
Room 1310, building B, ShiMao tower,
GuanDongZheng street, Xi’an
Tel: +86-029-8228-2428
Fax: +86-029-8228-2428
GungZhou Office
Room 602, NanTie Tower, No.57 No.1ZhongShan
road, YueXiu district, GungZhou
Tel: +86-20-6128-0990 / 6128-1025
Fax: +86-20-6128-1027
ChongQing Office
Room 9-2, building 19 HuaYuMingDu, ShiQiaoPu,
ChongQing
Tel: +86-23-6879-7626
Fax: +86-23-6879-7725
ChengDu Office
Room A3 floor 20, building A Time digital square,
No.1 South RenMin road, ChengDu
Tel: +86-28-8523-1553 / 8631-7092
Hong Kong Office
Unit A, 27/F., Dragon Centre, 79 Wing Hong Street,
Cheung Sha Wan, Kowloon, Hong Kong
Tel::+852-2396-8968
Fax::+852-2370-1222
http://www.optoma.com.hk
www.optoma.co.uk
V2 - 31/10/12
Copyright © 2012, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. DLP®, BrilliantColor™ and the DLP logo
are registered trademarks of Texas Instruments. Some images may be simulated. All images of products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some
product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves the right to amend or alter actual product or product images without notice. All specifications are subject to change without notice.
Errors and omissions excepted
Download PDF

advertising