APE Catalog CLICK HERE!

APE Catalog CLICK HERE!
Lead-Free Rework
printed circuit board rework and repair equipment from the rework company
Welcome…
....to the APE Rework Equipment Catalog. Many changes are taking place in our industry with the influence of RoHs
regulations and the acceptance of Lead-Free materials in equipment manufacture. There are few exceptions and generally this requirement regulates the international electronics community. Lead-Free materials require more stringent controls during production. A higher degree of manufacturing complications will result in a greater demand for quality
rework. To address these demands we have introduced several models of Vision/Reflow machines to meet every budget
while maintaining the rigorous requirements for Lead-Free manufacture. We are confident that we can provide a solution for your application and look forward to providing a personal service in caring for your rework needs.
Bill Scheu.......President and CEO
International Service and Support:
USA
Radio Products
Service Division
Singapore
Australia
A.P.E. USA Headquarters
2 North Blackwater Lane
Key Largo, FL 33037
Tel: 305-451-4722
Fax: 305-451-3374
E-mail: [email protected]
Motorola
Radio Products Service Division
1313 E. Algonquin Road
Shaumburg, IL 60196-1081
Tel: 800-442-4210
Fax: 800-622-6210
Primetec Pte Ltd
4012 Ang Mo Kio Avenue 10
#07-01 Techplace I
Singapore 569628
Tel: 65-6485-4811
Fax: 65-6481-4522
E-mail: [email protected]
Mektronics Co. PTY Ltd.
84B Industrial Drive
Braeside, Victoria
Australia, 3195
Tel: 613-958-73888
Fax: 613-958-73836
A.P.E. is proud to be a supplier to:
Canada
Maylasia
Turkey
India
A.P.E. USA Headquarters
2 North Blackwater Lane
Key Largo, FL 33037
Tel: 305-451-4722
Fax: 305-451-3374
E-mail: [email protected]
Yip In Tsoi & Jacks, Ltd.
523 Mahaprutharam Road
Bangrak, Bangkok
Thailand 10500
Tel: 662-353-8667
Fax: 665-353-8686
www.yipjacks.com
3S Electronics & Automation
Technologies Ltd.
Davutpasa Caddesi, Sercekale Sokak
10/1 Topkapi-Instanbul 34010 / Turkey
Tel: 90-212-482 8446 / 8456
Fax: 90-212-482 8456
E-Mail: [email protected]
American Tec Co. Ltd.
1010, 10th Floor, Mercantile House
15 K.G Marg, New Delhi
India 110001
Tel: 91 11 23706055
Fax: 91 11 237 06054
E-mail: [email protected]
UK
China
Brazil
Germany
Kaisertech
Unit 12, M3 Trade Park
Manor Way, Eastleigh,
Hampshire England, SO50 9YA
Tel: 44-(0)23 8065 0065
Fax: 44-(0)23 8065 0060
E-mail: [email protected]
American Tec Co Ltd
Flat A 1st Floor, Block 1
Cyber-Tech Zone, Gaoxin Ave 7 South
Nansham District, Shenzhen 518057
Tel: 86-7556-135-0555
Fax: 86-7556-135-0531
E-mail: [email protected]
KTI
Rua da Uniao, 25
Villa Mariana
Sao Paulo, Brazil, 04107-010
Tel: 551-157-59494
Fax: 551-157-50594
E-Mail: [email protected]
Microtronic GMBH
Klein Grotzing
D-84494 Newmarkt - St. Vrit
Germany
Tel: 49-722-962-030
Fax: 49-722-962-00
[email protected]
CAGE CODES: 1QWZ2 and 57216 GSA Contract # GS-07F-0483U
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Table of Contents
For your convenience we have written a Quick Description called “Overview” to introduce each of our
Hot Air Rework machines at the beginning of each page.
SMT Repair & Rework:
SMD-500 Chipper Portable Bench Hot Air Rework ................................................................................................2-3
SMT Profile Generated Repair & Rework:
SMD-1000 Chipmaster Rework & Repair System ....................................................................................................4-5
SMD-1000-Z Chipmaster-Z Axis and accessories .......................................................................................................6
Hot Plate Rework Systems:
RAD-6000-Z Chipmaster Radiant Anti-Warp Repair System ......................................................................................7
SMD-6000 Hot Plate Radiant Preheater ....................................................................................................................8
Convection Air Bottom Heaters:
SMD-2000 Dragon Focal Bottom Heater ..................................................................................................................9
SMD-2000 Komodo Panel Bottom Heater ................................................................................................................9
BGA/SMT Large Board and Ceramic & High Pin Count Rework:
Chip-Max RoHS-Rdy. Chipmaster ............................................................................................................................10
The Nozzle Page (for all systems) ............................................................................................................................11
SMD-5000-Z Flo-Master Preheat Rework Systems....................................................................................................12
SMD-5002 Flo-Master II & III Large Board Systems ..................................................................................................13
BGA/SMT Split Vision Repair & Rework:
SMD-7500 Liberty Series Split Vision Rework Systems ............................................................................................14
SMD-7500 Intruder-Lightning Split Vision Rework System ......................................................................................15
SMD-7500 Intruder-Marksman Split Vision Rework System......................................................................................16
SMD-7750 Sniper III Split Vision Rework System ......................................................................................................17
SMD-7007 Sniper-WB Wide Body for large PCBs ....................................................................................................18
BGA/SMT Rework Preparation Systems:
SMT Tool Kit & Rework Consumables ................................................................................................................20-21
SMT Contact Rework & Repair:
SMD-2000M SMT/PTH Self Contained Repair Station...............................................................................................22
EX-755 Digital SMT Solder and Tweezer System ....................................................................................................23
SMD-625 Digital Tweezer System ..........................................................................................................................23
SMT & Through-Hole Desolder Rework Systems:
EX-750 Digital Mixed Technology Repair System......................................................................................................24
CX-750 Chipper Plus Mixed Technology Repair System............................................................................................24
EX-700 Digital Solder & Desolder Station ................................................................................................................25
EX-680 Digital Desolder Station (Factory Air) ..........................................................................................................25
EX-685 Digital Solder Station ..................................................................................................................................26
EX-675 Analog Desolder Station (Factory Air) ..........................................................................................................26
Through-Hole Desoldering Accessories:
Handpiece Replacement Parts and Tips ...................................................................................................................27
PCB Track Repair Kits ..............................................................................................................................................28
Funnelets and Eyelets ............................................................................................................................................29
Gold Finger Contact Repair:
SRS-069 Plate-Master System ..................................................................................................................................30
LCD Production & Repair System:
SMD-9000 BondMaster LCD System ..................................................................................................................31-32
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
1
Chipper SMD-500 Power Rework
Overview
The Chipper is used for general low-volume standard SMT rework, prototyping, removing, and replacing components.
SMT Rework
An affordable, totally integrated system
for SMT rework and repair, the Chipper
SMD-500 is an excellent choice in
replacing older “Contact” rework tools
with the latest Low Temperature technology for reworking SMT components
without damage.
Automatic Lift Off
Nozzle Exchange
Program
The SMD-500 also includes three (3)
nozzles which can be included in a
unique A.P.E. exchange program,
allowing the User to exchange
any nozzle for up to one year from
purchase. See Nozzle List detailed on
page 11.
An automatic vacuum pick-up
assembly lifts the part from the board
once reflow temperature has been
reached and continues to hold the
part during the systems cooling cycle.
Lead-Free Rework
For Lead-Free rework the Chipper can
be used with an APE Bottom Heater
featured on page 9.
Board Holder
A standard 8" x 8" (203 x 203 mm)
Board Holder is included for most
board sizes, adjustable on every axis. A
board release mechanism allows each
board to snap into place and be quickly released when required. In addition,
an on-demand, Z-Axis clearance piston
avoids profile obstructions, when locating to, or moving from the nozzle.
2
Specifications:
Power
Current
Dimension
Board Holder
Nozzles included:
8100-0000-44
8100-1424
8100-1075
Temperature
Air Velocity
Vacuum
Air Source
Shipping
1200 Watts
10.90 Amp @ 110V, 5.45 Amp @220V
14" x 8" x 12" (203 x 180 x 305 mm)
Standard 8" x 8" (203 x 203 mm)
(User may select alternatives)
0.80" x 0.80" (20.3 x 20.3 mm)
0.71" x 0.40" (18.0 x 10.2 mm)
1.00" x 0.75" (25.4 x 19.0 mm)
Selectable Fahrenheit or Celsius
<12.7 CFM
Internal Pump
Internal Blower
24"x12" x 16", Weight 28 lb (12.73 kg)
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Chipper SMD-500 Power Rework
Automatic Vacuum Pick-up
The vacuum switch is turned on
and the vacuum pick-up assembly
with vacuum cup, is brought to the
top of the component body. The foot
pedal is then activated and the
component automatically lifts from
the circuit board when the
component passes reflow
temperature.
Cool Operation
Preparation
Preparation of the part for removal
and cleaning of the PCB component
footprint for replacement is critical
in successful rework. A.P.E. has
therefore designed a carefully
constructed SMT Tool Kit, which has
all the necessary tools and ingredients
for a professional job; see page 2021 for details.
Once the system is switched on, the
Controller carries out a “Self Test”
and the internal Blower Motor
engages to provide a constant stream
of high volume, low velocity cool air,
which will not disturb or solderball,
within the rework area.
Autotune Controller
Temperature Display registers
“Set Point” temperature in either
Celsius or Fahrenheit.
Nozzle Selection
An appropriate size nozzle is easily
installed and the correct temperature
is selected. The workpiece is mounted
in the board holder and the nozzle
placed over the component allowing
a gap of 1/8" (3 mm) above the body
of the component.
Autotune
Digital Controllers
Normal display:
Process temperature
*
NEMA 4X/IP65
sealed ‘wash
down’ fascia
Main setpoint: SP1
output indicator,
(flashing LED)
▼
Large bright
4-digit LED display
▲
CAL 3200
▼
*
Optional Accessories:
Part #
Description
8100-0598
Halogen Light 110V
8100-1097
SMT Tool Kit
▼
*
▲
CAL 3200
▲
CAL 3200
Tactile keys,
amply spaced
Adjustment of setpoint
▼
*
Second setpoint: SP2
output indicator,
(flashing indicator)
Entry to program mode
▲
CAL 3200
*
▼
▲
CAL 3200
Order Information:
Model
Part #
Description
SMD-500
4000-1000
110V 60 Hz CSA
SMD-502
4000-1002
220V 50 Hz CE
Alternating display:
Autotuning (shown),
alarm, etc.
Setpoint with unit (°C, °F, etc.)
*
▼
▲
CAL 3200
*
▼
▲
CAL 3200
*
CAL 3200
▼
▲
*
▼
▲
CAL 3200
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
3
Chipmaster SMD-1000
Overview
Chipmaster systems are reliable SMT Component Rework machines, suitable for small to medium size boards and
devices, requiring Profile Temperature Control.
Note - Lead-Free placement for BGA’s requires a
Vision/Reflow system for accurate alignment
(see pg. 14 - 18)
Wide Ranging
Covering a wide range of components, the Chipmaster SMD-1000
Rework Engine, provides a controlled
rework environment, which cares for
your repair process. The system features a simple operation with
automatic “Timed” process control
and selected thermal profiling.
Energy Reflow
What makes the Chipmaster different
from other Hot Air rework machines
is “CONVECTION POWER.” Its highpower heater reworks sensitive components at original Convection Oven
temperatures.
Lead-Free Rework
Oven Temperature Convection Rework
is critical when reworking Lead-Free
components. The component reflow
temperature is higher for Lead-Free
materials but the heat source should
be kept to an optimum convection
temperature to avoid damaging surrounding components. Replicating the
manufacturing method using a convection air reflow technology is the
safest method.
The Chipmaster requires an APE
Bottom Heater featured on pages 8-9
for Lead-Free reworking.
Solder Integrity
The following micro sections indicate
the superior quality of a solder
junction when operating at Low
Temperature using the Chipmaster.
Specifications:
Power
Current
Dimension
Board Holder
Nozzles included:
8100-0000-44
8100-1424
8100-1075
Temperature
Air Velocity
Vacuum
Air Source
Controller
Shipping
4
1200 Watts
10.90 Amp @ 110V, 5.45 Amp @ 220V
22.25" x 9.25" x 8.62"
(362 x 235 x 219 mm)
Standard 8" x 8" (203 x 203 mm)
(User may select alternatives)
0.80" x 0.80" (20.3 x 20.3 mm)
0.71" x 0.40" (18.0 x 10.2 mm)
1.00" x 0.75" (25.4 x 19.0 mm)
Selectable Fahrenheit or Celsius
<12.7 CFM
Internal Pump
Internal Blower
Fuzzy Logic PID
Standard 8100-1003 24" x 12" x 16"
Weight 35 lb (15.9 kg)
Chipmaster Rework
Temperature
At the original Convection Oven Temperature
integrity of solder remains intact.
Common Low Power
Rework Temperatures
With air temperatures greater than the original
Convection Oven Temperature the integrity of
solder begins to break down.
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Chipmaster SMD-1000
Safer, faster rework
The selected profile contains ramp and
soak segments of Temp & Time
Features:
• High Power: 1200 Watts providing
>100,000 Joules during a typical
rework cycle, delivering >28,000
calories of energy, which enables
the Chipmaster to work at
reduced temperatures and
with low air velocity
• Integrated Digital Timer
• Microprocessor PID Control
• Digital closed-loop
sensing
• Optimum process
repeatability <2% of
Set Point temperature
• °F and °C selectable
• Low air velocity of
12.7 CFM
• Internal vacuum pump
• Quick change
nozzle design
Time
Profile Storage Controller
• Automatic component pick-up
• Uniform heat distribution
• PID Profile Storage Control for
workshop repair conditions,
optimizing performance, providing
soak and ramp without a computer
add on
Eutectic Profile Examples
Plastic Socket
Degrees F
500
400
300
200
100
REFLOW
1
2
Time (Minutes)
BGA Rework
Temperature
Ordering information
The standard SMD-1000 Chipmaster
is a fully operational system
configured for reworking BGA/SMT
components.
SMD-1000 System includes:
Power Supply
Blower Unit
Digital Timer Controller
Chip Pick-Up Assembly
Heater: 1200 Watt
Board Holder: 8"x 8"
(203 x 203 mm)
• Nozzle Kit three (3) piece
• SMT Tool Kit 8100-1097
• Halogen Light
Part #
3
4
Degrees F
500
400
300
200
100
3
4
5
4
5
REFLOW
1
2
Time (Minutes)
Flexible Circuits
5
REFLOW
1
2
Time (Minutes)
(QFP)
5
REFLOW
Degrees F
500
400
300
200
100
Glob Top
•
•
•
•
•
•
4
Degrees F
500
400
300
200
100
1
2
Time (Minutes)
Quad Flat Pack
3
3
Degrees F
500
400
300
200
100
1
2
Time (Minutes)
REFLOW
3
4
5
Description
Pin Grid Array
SMD-1000
8100-1003-114 Standard Chipmaster
110V 60 Hz CSA
8100-1023-114 Standard Chipmaster
220V 50 Hz CE
The Standard SMD-1000 Chipmaster
includes components as shown
Information on SMT Tool Kit See page 20
“Nozzles” See page 11
(PGA)
Degrees F
500
400
300
200
100
1
2
Time (Minutes)
REFLOW
3
4
5
Lead-Free reflow requires Bottom
Heat to achieve safe temperature
conditions
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
5
Chipmaster and Chipmaster-Z Accessories
Overview
The Chipmaster-Z is similar in specification to the standard Chipmaster but includes an electric Z axis, which provides
precise control in accessing and extracting the nozzle from the component being reworked.
Automated Z Axis
The Chipmaster-Z automates the Z axis adjustment
and assists the user in clearing the area after rework.
It also helps access the component without concern
of surrounding obstructions.
New 4 Sided Frame Board Holder
A range of Frame Board Holders has been designed
for use with the Chipmaster-Z and other APE products. They include smooth action bearings and ledge
pressure PCB support (see illustration below).
Underboard Heating
The SMD-1000-Z is a good
choice for reworking
Lead-Free devices and can
be used with a Radiant
Hotplate or a Dragon series
Bottom Board Heater. (P-10).
Z Axis 0.75” (19mm)
8100-1003-114-Z:
The Chipmaster-Z, SMD-1000-Z,
system includes a Profile Storage
Controller, which enables ramp and
soak profiling to ensure optimum solder
temperatures during flux activation and reflow.
High Temperature Vacuum
Cups
Available in three different sizes High
Temperature Vacuum Cups specifically desgined for use with APE Hot Air
products. Order online at
www.ape.com
Part #
Description
8100-0003
8100-0003S
8100-0003L
8100-0003A
Vacuum Cups 0.312
Vacuum Cups 0.200
Vacuum Cups 0.520
Vacuum Cups Assorted
Frame Board Holders
8100-0812
8100-1416
8100-2024
8” x 12” (203 x 304 mm) as photo
14” x 16” (355 x 406 mm)
20” x 24” (508 x 610 mm)
Specifications:
(see page 4)
Chipmaster
Z Axis Movement 0.75 inches (19 mm)
Chipmaster-Z Axis Order Information
8100-1003-114-Z Optimum Kit
8100-1023-114-Z Optimum Kit
110V 60 Hz
220V 50 Hz
Includes:
Chipmaster-Z (110V or 220V)
Profile Storage Controller
Frame Board Holder 8” x 12” (208 x 304mm)
Three (3) Reflow Nozzles (Users Choice)
6
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Chipmaster-Z Axis Radiant RAD-6000-Z
Overview
The Chipmaster-Z Axis Radiant System will rework larger boards and larger chips,
or high metal content PCBs requiring additional heat distribution
Rework Larger PCBs Safely
Stop Board Warp Dead in its Tracks…
A common problem in reworking
larger circuit boards, typically greater
than 10" x 12" (254 x 305 mm), is
warp during the local heating
process. This problem can also be
experienced on smaller boards
depending upon layer structure and
connection distribution.
Stabilized Rework Operation
The Chipmaster-Z Axis Radiant
provides a wide area preheat
solution, which gradually and
uniformly maintains a temperature,
sufficient to stabilize the PCB prior to
and during the rework operation.
This constant total area heat
stabilization is not possible with
bottom focal heat systems.
High Mass Radiant Energy
The Chipmaster-Z Axis Radiant
delivers 144 sq. inches of digitally
controlled radiant energy accurate to
±2°F, once calibrated. Its cast
aluminum surface may be machined
for unique profiling for one or more
circuit boards.
High Energy, Low Temperature
Operation
When integrated with the High
Energy, Low Temperature technology
of the Chipmaster-Z, the system can
rework soft plastic components at
less than 410°F
(210°C), which would otherwise
distort or melt down with
conventional machines.
Articulating Board Holder
8100-2424
The 8100-2424
Frame Board Holder
is an important dual-axis
mechanism, which
positions the PCB
over the radiant
surface for rework to
the circuit board and returns
the PCB to its original cool start
location for preparation.
Part #
Description
8000-0009-Z
8000-0010-Z
Radiant Chipmaster Z-Axis System 110V 60 Hz CSA
Radiant Chipmaster Z-Axis System 220V 50 Hz CE
RAD-6000-Z System includes:
8100-1003-Z
8100-6000
8100-2424
8100-1102
8100-1103
8100-0598
8100-1097
8100-1649
Chipmaster-Z (see page 6)
Radiant Preheater 12" x 12" (305 x 305 mm)
Board Holder for Hot Plate
Chipmaster Riser Platform
Board Holder Riser Platform
Halogen Light 110V
SMD Tool Kit
Nozzle Kit three (3) piece
Specifications:
Chipmaster 8100-1003-Z
Chipmaster 8100-1023-Z
Power
Current
Dimension
Board Holder 8100-2424
Nozzles included:
8100-0000-44
8100-1424
8100-1075
Temperature
Air Velocity
Vacuum
Air Source
Controller
Hot Plate 8100-6000
Hot Plate 8100-6002
Controller
Surface Area
110V, 60 Hz CSA
220V, 50 Hz CE
1200 Watts
10.90 Amp @ 110V, 5.45 Amps @ 220V
22.25" x 9.25" x 8.62" (362 x 235 x 219 mm)
24" x 24" (610 x 610 mm)
(User may select alternatives)
0.80" x 0.80" (20.3 x 20.3 mm)
0.71" x 0.40" (18.0 x 10.2 mm)
1.00" x 0.75" (25.4 x 19.0 mm)
Selectable Fahrenheit or Celsius
<12.7 CFM
Internal Pump
Internal Blower
Fuzzy Logic PID
110V 60 Hz CSA
220V 50 Hz CE
Fuzzy Logic PID
Cast Aluminum 12" x 12" (305 x 305 mm)
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
7
Radiant Hot Plate SMD-6000
Overview
A Hot Plate system designed especially for the Electronics Industry - Soak, Preheat, Burn In, Reflow, Pull Test & other uses
Radiant Energy
The Radiant Hot Plate has been
engineered to provide an efficient
High Mass Digitally Controlled Direct
Radiant Energy source for
“in-process” or “off-line” preheat
and bake requirements of
components and circuit boards.
Large Area Stability
The Radiant Hot Plate is non-static
generating and includes 144 sq.
inches of cast aluminum, selected to
ensure stability of performance
and close tolerance over the surface
of the Hot Plate.
Digital Control
A PID Digital Closed-Loop
Programmable Controller measures
the temperature feedback via a “K”
type thermocouple. A temperature
setting may be calibrated and stored
within the Controller and once set,
will be maintained to ±2°F.
Temperature Profile Chart
Thermal Imaging of Surface
250
Four (4) Heat Shield Guards are
installed to protect the user. The
Digital Controller is preset to a
maximum of 350°F (176°C), but can
be increased upon request. It is
recommended that the Hot Plate be
placed in a zoned area and a
“Caution” notice posted that a
hot surface is present.
Temperature ° F
200
Safety First
150
100
50
0
0.15 0.25 0.35 0.50 0.75 1.00 2.00 3.00 4.00 5.00 6.00
Hours
Specifications:
Dimension:
Weight:
Power:
12" x 6-1/8" x 13" (305 x 156 x 330 mm)
17.5 lb (7.9 kg)
110V-1500 Watts, 220V-1600 Watts,
50/60 Hz
Maximum Temperature:
Standard Factory Regulated
Special Factory Regulated
Maximum Permitted Weight
on top of Hot Plate
Cord
Heating Element
Controller
Radiant Plate
Stabilizing Period
Timer
ESD Rating
Safety Shielding
Fuse
Switching
8
350°F (177°C) ±2°F
700°F (371°C) ±2°F
40 lb (17.1 kg)
Three Wire
Ceramic
PID Fuzzy Logic Digital
Cast Aluminum 12" x 12" (305 x 305 mm)
45 Minutes
Push to start, push to stop
<0.004V
Four (4) Side Guards
15 Amps
Solid-State 430 m/s
Order Information
Part #
Description
8100-6000
Hot Plate 110V 60 Hz
8100-6002
Hot Plate 220V 50 Hz
High Temperature Reflow Hot Plate
Part #
Description
8100-6100
Reflow Hot Plate 110V 60 Hz
8100-6102
Reflow Hot Plate 220V 50 Hz
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Chipmaster Bottom Heaters SMD-2000 Series
Overview
Bottom Heaters are necessary in Lead-Free rework to assist in keeping top reflow conditions to the original manufacturing
oven temperatures. The Dragon and Komodo Dragon can be used in conjunction with Chipper/Chipmaster systems.
Komodo Panel Bottom Heat Unit for Chipmaster
Panel PreHeat
Dragon Focal Bottom Heat Unit
A heavy duty 6” Round Bottom Panel Heater with a surface
area of 64” (1,615mm). A Digital Closed-Loop Temperature
Controller maintains the programmed temperature via high
capacity 1200 Watt heater. Can be used with both Frame
and Fork board holders. Also great for hand soldering.
Part #
Description
4000-1033
Komodo Dragon Bottom Heat System
110V 60 Hz
4000-1034
Komodo Dragon Bottom Heat System
220V 50 Hz
Order Information
Focused PreHeat
A Digital Closed-Loop Ttemperature Controlled Bottom
Heater for use with the Chipmaster. Includes a self-contained blower unit for constant low-velocity, high-volume air flow. Temperature may be directly focused
using standard nozzles, which are interchangeable. The
system is fully guarded throughout the length of the
heater of the heater arm.
Part #
Description
2000-1000 Dragon Bottom Heat System
110V 60 Hz
2000-1002 Dragon Bottom Heat System
220V 50 Hz
The Dragon can be used with a Chipmaster-Z Axis (P-6) and a 14”
x 16” Board Holder Upgrade.
Toll Free: 1-800-VAC-TOGO (822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
9
Chip-Max RoHS Rdy Chipmaster
8300-33-RoHS-RdyChipmaster
Overview
An affordable, totally integrated system for SMT rework and repair, the Chip-Max RoHS Rdy. Chipmaster is an excellent
choice in replacing older “Contact” rework tools wit h the latest Low Temperature Hot Air technology for reworking
Lead Free SMT components without damage, at an affordable price.
Portable Benchtop Lead Free Rework
Low Temperature Operation
SMT & Through-Hole Rework
Accurate closed-loop temperature monitoring of
a APE patented High Power heater, reduces
rework temperature below 482°F (250°C). A bottom integrated heat source ensures stability of
board temperature, reducing the necessary top
reflow temperature, thereby following a more
precise profile structure for the component
undergoing rework.
A.P.E. Chip-Max Rework and manufacturing system performs surface
mount and conventional component repairs. Nozzle temperature is
electronically controlled from 450 to 900°F (232 to 482°C). Two
programmable digital controllers feature responsive closed-loop
temperature control with large LED readouts, indicating “Set”
and “Operating” temperatures.
Component Automatic Lift Off
The vacuum switch is turned on and the
vacuum pick-up assembly is contacted to
the top of component body. When the
component passes the eutectic temperature
the component automatically lifts from the
circuit.
Order Information
Part #
Description
8300-33-RoHS-Rdy RoHS Rdy. Chip-Max 110V 60 Hz
8300-34-RoHS-Rdy RoHS Rdy. Chip-Max 220V 50 Hz
8100-0485 Board Holder 8" x 8" (203 x 203 mm) (included)
8100-0812 Frame Board Holder 8" x 12" (203 x 304 mm)
8100-2024 Frame Board Holder 14" x 16" (355 x 406 mm)
10
Chipmaster RoHS Rdy. Chip-Max
Total Power
Current
Dimension
Board Holder
Reflow Nozzles included
Bottom Heater
Temperature
Reflow Air Velocity
Component Vacuum Pick-Up
Reflow Control
Bottom Controller
Range
Weight
Shipping
Includes
110V/220V 50/60 Hz 2400 Watts
16.36 Amps @ 110V, 10.91 Amp @ 220V
22.25”x 9.25” x 8.62” (362 x 235 x 219 mm)
8" x 8" (203 x 203 mm)
3 User Selected Nozzles (Optional nozzles available)
1200 Watts Forced Air Convection Heater
Celsius or Fahrenheit Selectable
12.7 CFM
Internal
On-Board Fuzzy Digital Logic
PID Fuzzy Logic
450 to 900°F (232 to 482°C)
40 lbs ( 18.14 Kilos)
Standard
Board holder 8” x 8”, SMT Tool kit,
Nozzles, Footpedal
Toll Free: 1-800-VAC-TOGO (822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
The Nozzle Page
Overview
Large selection of Hot Air nozzles available for a variety of applications ranging from BGA’s, RF shields, edge connectors, and
Preheat nozzles. Please go to our online website www.APE.com for a more detailed and complete list of nozzles.
Inches
0.25 x 0.25
Millimeters
6.3 x 6.3
Part Number
8100-0008
8100-0016J
8100-7613
8100-1603
Inches
0.75 x 1.9
0.75 x 2.0
0.75 x 2.0
0.80 x 0.80
Millimeters
19.1 x 48.3
19.1 x 50.8
19.1 x 50.8
20.3 x 20.3
Part Number
8100-1978
8100-0028J
8100-0028
8100-0000-44
0.30 x 0.40
0.30 x 0.53
0.30 x 1.6
7.6 x 10.2
7.6 x 13.5
7.6 x 40.6
0.35 x 0.5
8.9 x 12.7
8100-0020J
0.83 x 0.83
21.1 x 21.1
8100-0080Q
0.37 x 2.20
8.9 x 55.9
8100-2204
0.897 x 1.77
22.8 x 45.0
8100-0817
0.40 x 0.45
10.2 x 11.4
8100-0018J
0.90 x 0.90
22.9 x 22.9
8100-0000-52
0.40 x 0.50
10.2 x 12.7
8100-0504
0.40 x 0.71
0.40 x 0.8
0.40 x 1.7
0.40 x 2.4
0.40 x 2.6
0.45 x 0.67
0.45 x 0.96
0.45 x 2.4
10.2 x 18.0
10.2 x 20.3
10.2 x 43.2
10.2 x 61.0
10.2 x 66.0
11.5 x 17.0
11.4 x 24.4
11.4 x 61.0
8100-1424
8100-0804
8100-1704
8100-2404
8100-2604
8100-1117
8100-4596
8100-0240
0.95 x 0.95
1.00 x 1.00
1.1 x 1.1
24.1 x 24.1
25.4 x 25.4
27.9 x 27.9
8100-0100Q
8100-0110
8100-0000-68
1.2 x 1.2
30.5 x 30.5
8100-0132
1.25 x 1.25
31.8 x 31.8
8100-1250
1.25 x 3.0
1.272 x 1.99
1.3 x 1.3
1.4 x 1.4
31.8 x 76.2
32.3 x 50.6
33.0 x 33.0
35.6 x 35.6
8100-3125
8100-0199
8100-1313
8100-1414-F
0.45 x 4.0
11.4 x 101.6
8100-4045
1.4 x 1.4
35.6 x 35.6
8100-1414-C
0.47 x 0.55
0.47 x 0.79
12.0 x 14.0
12.0 x 20.0
8100-1214
8100-2012
1.4 x 2.6
1.4 x 3.0
66.0 x 35.6
35.6 x 76.2
8100-2614
8100-3014
0.47 x 0.77
12.0 x 19.5
8100-1912
1.479 x 2.87
37.6 x 72.9
8100-1479
0.5 x 4.2
0.5 x 0.5
12.7 x 106.7
12.7 x 12.7
8100-4255
8100-0000-20
1.5 x 1.5
38.1 x 38.1
8100-1515
0.5 x 0.95
12.7 x 24.1
8100-0595
1.5 x 1.5
1.5 x 1.75
38.1 x 38.1
38.1 x 44.5
8100-0196Q
8100-5175
0.5 x 0.95
0.5 x 1
0.5 x 1.35
0.5 x 4.5
0.51 x 1.06
0.53 x 0.53
0.53 x 0.63
0.55 x 0.79
0.6 x 0.6
0.6 x 0.9
0.6 x 0.7
0.65 x 1
0.7 x 1.4
0.7 x 1.525
0.7 x 2.0 x .25
0.7 x 2.3
0.7 x 2.6
0.715 x 0.715
0.72 x 1.5
12.7 x 24.1
12.7 x 25.4
12.7 x 34.3
12.7 x 114.3
13.0 x 27.0
8100-0024J
8100-0510
8100-2460
8100-4505
8100-2713
1.5 x 3.35
38.1 x 85.1
8100-1305
13.5 x 13.5
13.5 x 16.0
14.0 x 20.0
15.2 x 15.2
15.2 x 22.9
15.2 x 17.8
16.5 x 25.4
17.8 x 35.6
17.8 x 38.7
17.8 x 50.8 x 6.4
17.8 x 58.4
17.8 x 66.0
18.2 x 18.2
18.3 x 38.1
19.1 x 19.1
8100-1313C
8100-1316
8100-1420
8100-0000-28
8100-0609
8100-0000-32
8100-0640
1.57 x 2.146
1.6 x 1.6
1.625 x 1.625
1.69 x 1.69
1.75 x 1.75
1.80 x 1.80
1.82 x 1.82
1.85 x 1.85
2.0 x 2.0
2.25 x 2.25
2.5 x 2.5
2.5 x 4.5
2.75 x 2.75
3.00 x 3.00
3.25 x 3.25
3.50 x 3.50
3.75 x 3.75
1.3 x 1.3
1.5 x 1.5
39.9 x 54.5
40.6 x 40.6
41.3 x 41.3
43 x 43
44.5 x 44.5
45.7 x 45.7
46.2 x 46.2
47 x 47
50.8 x 5.8
57.1 x 57.1
63.5 x 63.5
63.5 x 114.3
69.9 x 69.9
76.2 x 76.2
82.3 x 82.3
88.9 x 88.9
95.3 x 95.3
33 x 33
38.1 x 38.1
8100-2115
8100-0161
8100-0340
8100-4343
8100-1750
0.75 x 0.75
8100-1407
8100-0157
8100-0101PA
8100-2307
8100-0267
8100-7171
8100-1572
8100-7575
8100-1818
8100-1821
8100-4747
8100-2222
8100-2225
8100-2525
8100-2545
8100-2775
8100-3030
8100-3225
8100-3535
8100-3725
8100-1313P
8100-0196P
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
11
Flo-Master-Z™ SMD-5000-Z Series
Overview
Flo-Master rework machines provide solutions to reworking large boards and larger components. They include handling
capabilities that make it easier to work with difficult PCBs.
For Gentle but Powerful
Rework
Energy Reflow with Z-Axis
The Flo-Master-Z BGA/SMT rework
and repair engine is a fully integrated dual, top and bottom heat system, including an electrically actuated Z-Axis, designed to handle LeadFree conditions, Military-type boards,
and commercial applications that
require an efficient level of energy
versus temperature.
Bottom Heat
A bottom heat source ensures stability of
board temperature, reducing the necessary top reflow temperature, thereby
following a more precise profile structure
for the component undergoing rework.
Latched Top and Bottom Control
The top reflow controller triggers the bottom heater thereby controlling the overall
rework process. Each controller is set up
independently with its own “profile” and
“process time” controls. An important
feature is the power available, optimizing
the energy performance flowing below
and into the workpiece, preventing
unnecessary overheating.
Temperature Profiles
A range of temperature profiles are pre-installed for top and bottom controllers. Each thermal profile may be custom programmed, for different
combinations of ramp & soak temperature profiling.
Lead-Free BGA Rework
Lead-Free device placement for BGA’s requires a Vision/Reflow system for
accurate alignment
Order Information
Part #
Description
5000-2000-Z
5000-2002-Z
5000-2000-ZP
5000-2002-ZP
Flo-Master-Z 110V 60 Hz Focal Bottom Heater
Flo-Master-Z 220V 50 Hz Focal Bottom Heater
Flo-Master-Z 110V 60 Hz Panel Preheater
Flo-Master-Z 220V 50 Hz Panel Preheater
8100-0812 Board Holder 8" x 12" (203 x 305 mm) (included)
8100-1416U Board Holder Upgrade 14" x 16" (355 x 406 mm)
8100-2024U Board Holder Upgrade 20" x 24" (508 x 609 mm )
12
Specifications:
Power
Current
Dimension
Board Holder Standard
Reflow Nozzles included:
8100-0000-44
8100-1424
8100-0132
8100-1414
8100-0000-20
8100-0000-68
Preheat Nozzles:
8100-2222P
8100-0340P
8100-0196P
8100-1313P
Temperature
Air Velocity (Both Heaters)
Vacuum
Air Source
Controller (Both Heaters)
4-Axis X-Y Table Built In
Operation
Maximum Board Size
Illumination
110V–1800 Watts, 220V–2400 Watts
16.36 Amp @ 110V, 10.91 Amp @ 220V
26" x 12.75" x 16" (660 x 324 x 406 mm)
8" x 12" (203 x 305 mm) included
(User may select alternatives)
0.80" x 0.80" (20.3 x 20.3 mm)
0.71" x 0.40" (18.0 x 10.2 mm)
1.20" x 1.20" (30.5 x 30.5 mm)
1.40" x 1.40" (35.6 x 35.6 mm)
0.50" x 0.50" (12.0 x 12.7 mm)
1.10" x 1.10" (28.0 x 28.0 mm)
(Fixed Selection)
2.00" x 2.00" (50.8 x 50.8 mm)
1.62" x 1.62" (41.1 x 41.1 mm)
1.50" x 1.50" (38.1 x 38.1 mm)
1.30" x 1.30" (33.0 x 33.0 mm)
Selectable Fahrenheit or Celsius
<12.7 CFM
Internal (Optional Factory Air)
Internal
Fuzzy Logic PID Profile Storage
19.0" x 15.50" (482.6 x 393.7 mm)
Pulsed or Continuous
14” x 20"
Halogen Light 8100-0598
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Flo-Master II SMD-5002 & Flo-Master III SMD-5003
Overview
The Flo-Master series includes integrated features for computer profiling of components. The Flo-Master series should be
considered for PCB’s greater than 12” x 14” (305 x 356 mm). Preheats can be configured in either a Focal preheat or Panel
preheat The standard model includes a 14” x 16” (355 x 406 mm) Board Holder, a 20” x 24” (508 x 609 mm) is available as a standard
upgrade option.
Multiple Profile Storage
The Flo-Master series Reflow Controller uses a state of the art OnBoard-Computer, which rapidly calculates a temperature environment.
The Computer Controller stores sixteen (16) profiles each with sixteen
(16) segments for temperature ramp and soak instructions. Profiles
may be programmed directly using the keypad. Alternatively, unlimited
profiles can be generated with an external computer and “uploaded”
by the optional Windows-compatible Graphical Display Program.
Simple Operation
Underboard Heating
A profile pattern can be run by simply selecting
the “Run” key on the Controller. The entire
process is controlled by the controller so that
the operator need not be
in attendance during
the reflow process.
The Flo-Master series underboard heater is automatically controlled
by the top Reflow Controller. An output signal starts the bottom
heat cycle and automatically switches it off after the reflow cycle.
Available both in a focal or panel pre-heat version.
Thermocouples placed
for profile development
Flo-Master II & III Series Specification:
Power Top Heater
Power bottom Heater
Current
Dimension
Standard Board Holder
Reflow Nozzles included
Temperature
Reflow Air Velocity
Component Pick Up
Controller
Weight
110–220V 1200 Watts
1200 Watts - 2400 Watts
25 Amps @ 110V, 15 Amps @ 220V
21.75" x 29.12" (552 x 740 mm)
Frame 8" x 12" (203 x 304 mm)
Three Nozzles of Choice
Select Celsius or Fahrenheit
Internal Motor <12.7 CFM
Internal Pump -Shop Air option
On Board PID Computers/ Optional
Windows PC graphical Software
125 lb (56.81kg)
Part #
Description
5000-1500
Flo-Master II Focal Bottom Heat 110V 60 Hz
5000-1502
Flo-Master II Focal Bottom Heat 220V 50 Hz
5000-6002
Flo-Master II Panel Bottom Heat 220V 50 Hz
5003-1002
Flo-Master III Panel Bottom Heat 220V 50 Hz
Board Holders:
8100-2024
20”x 24” (508 x 610 mm)
(upgrade) Included with Flo-Master III
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
13
APE NEW PRODUCTS Liberty Split Vision Rework Systems
The Liberty series Bandit (110V) and Sharpshooter (220V) are, simple to operate, Vision Placement rework machines that
include a Temperature Profile Controller. Machines may be configured as a single Top Heater reflow system or with an
integrated Bottom Heater. The Liberty series is designed for flexibility and for a budget conscious user. The system is also
available as a Vision Placement system only. Systems configured with a Bottom Heater are suitable for Lead-free rework.
Liberty Series
The Bandit 110V and Sharpshooter 220V are
identical machines that include a manual component placement arm with a final precision
touch-down stage. The Liberty series is
designed for board sizes up to 14” x 16.”
XY Table
The basic model 7500-1000 is equipped with a
free standing 8” x 12” Frame Board Holder
with a Teflon coated base for easy positioning
(see below). The model 7500-1500 includes
the same Frame Board Holder but mounted on
linear rails, (see Sharpshooter photo adjacent).
Profile Storage Controller
A dual system of Microprocessor Profile
Storage Controllers is provided for high
throughput repair conditions, optimizing performance and providing soak/ramp without a
computer accessory.
These Top Reflow and Bottom Pre-Heat
Controllers are electrically coupled and include
Integrated Digital Timers, Digital Closed-Loop
sensing and an optimum process with repeatability <2% of set point temperature °F and °C
selectable
Order Information
Liberty series
Part #
7500-1500 Pb
(Pb = Lead-Free compliant)
Description
Bandit Top/Bottom Heat 110V 60Hz
7500-1502 Pb
Sharpshooter Top/Bottom Heat 220V 50Hz
7500-1000
Bandit Top Heat only 110V 60Hz
7500-1002
Sharpshooter Top Heat only 220V 50Hz
7500-0250
Bandit vision system only 110V 60Hz
7500-0252
8100-1416
14
Degrees F
500
400
300
200
100
1
2
Time (Minutes)
REFLOW
3
5
Liberty Series Specification:
Power Top Heater
Power bottom Heater
Current
Optional Frame Board Holder 14” x 16”
Dimension
Standard Board Holder
Reflow Nozzles included
Preheat Nozzles included
Temperature
Reflow Air Velocity
Component Pick Up
Controller
Monitor for Lightning
Board Alignment
Basic Free Standing
Reflow Operation
Board Holder supplied
Weight
with 7500-1000 and
7500-1002 machines
Sharpshooter vision system only 220V 50Hz
4
110–220V 1200 Watts
600 Watts
25 Amps @ 110V, 15 Amps @ 220V
21.75" x 29.12" (552 x 740 mm)
Frame 8" x 12" (203 x 304 mm)
Three Nozzles of Choice
Two included
Select Celsius or Fahrenheit
Internal Motor <12.7 CFM
Internal Pump -Shop Air option
On Board PID Computers
13” Color Display
Micrometer Controls
Close Loop
125 lb (56.81kg)
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
APE NEW PRODUCTS Intruder Lightning Split Vision
There are two variations in the Intruder series, both are suitable for Lead-Free rework: The Intruder-Lightning model
7500-5000 (as shown) has a Focal Bottom Heater whereas the Intruder-Marksman 7500-7500 has a Panel Heater. Each
machine includes a manual component placement arm with a final precision touch-down stage. Programming and
reflow functions are identical to the Sniper series of systems.
Thermocouples placed
for profile development
Thermocouple (TC) Bank
Profile Pattern Generation
The Intruder-Lightning includes an OnBoard-Computer, which is programmed
and operated using an integral
keypad. Alternatively the system can
be controlled via an RS232 connection
with an external computer.
Graphical Display Window
(GDW) 7000-1250
External Computer software is optional
on the Intruder-Lightning. The software operates in a Windows-based
environment. Profile Pattern Recipes
are easily created, stored, recalled, and
edited using a Graphical Display
Window (GDW). Programs are automatically uploaded to the Intruder
controller. Any number of profiles may
be stored for future recall.
The integrated TC Bank provides 4
Thermocouple outputs, which can
be used to develop a profile pattern, when used with the external
computer software 7000-1250
(optional with the IntruderLightning). Note that the TC Bank
is used for development and need
not be used in production.
Order Information
Part #
7500-5000
Description
Intruder Lightning 110V 60Hz
7500-5002
Intruder Lightning 220V 50Hz
7000-1250
Optional Computer Software
Intruder-Lightning Specification:
Power
Current
Dimension
Board Holder Lightning
Board Holder Upgrade
Reflow Nozzles included
Bottom Nozzles
Temperature
Reflow Air Velocity
Component Pick Up
Profile Controller
External Profile Generation
Monitor
Program Development
Board Alignment
Reflow Operation
Maximum Board Size
Weight
Communication
Operational Software
110–220V 1800 Watts
25 Amps @ 110V, 15 Amps @ 220V
21.75" x 29.12" (552 x 740 mm)
Frame 8" x 12" (203 x 304 mm)
Frame 14" x 16" (355 x 406 mm)
Three Nozzles of Choice
Two included
Select Celsius or Fahrenheit
Internal Motor <12.7 CFM
Internal Pump -Shop Air option
On-Board-Computer 16 profiles
Pentium IV with 17” Monitor (option)
13” Color Display
Thermocouple Bank (4 x TC)
Micrometer Controls
Close Loop
14" x 16"(355 x 406 mm)
125 lb (56.81kg)
RS232 Sniper II Only
Option 7000-1250
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
15
APE NEW PRODUCTS Intruder Marksman Split Vision
The Intruder-Marksman 7500-7500 has a Panel Bottom Heater and is recommended for larger boards, particularly when
assemblies are manufactured using Lead-Free materials. The machine includes a manual component placement arm with
a final precision touch-down stage. Programming and reflow functions are identical to the Sniper series of systems, generating “Ramp-Soak” Profile Patterns using graphical software supplied.
On-Board-Computer
Profile Pattern Generation
The Intruder-Marksman includes an
On-Board-Computer, which is programmed and operated using an integral keypad. The system can also be
controlled via an RS232 connection
with an external computer.
Graphical Display Window
(GDW) 7000-1250
External Computer software is included with Intruder-Marksman. The software operates in a Windows-based
environment. Profile Pattern Recipes
are easily created, stored, recalled, and
edited using a Graphical Display
Window (GDW). Programs are automatically uploaded to the Intruder
controller. Any number of profiles may
be stored for future recall.
16
Thermocouple (TC) Bank
The integrated TC Bank provides 4
Thermocouple outputs, which can
be used to develop a profile pattern, when used with the external
computer software 7000-1250
(optional with the IntruderLightning). Note that the TC Bank
is used for development and need
not be used in production.
Order Information
Part #
7500-7500
Description
Intruder Marksman 110V 60Hz
7500-7500
Intruder Marksman 220V 50Hz
Intruder-Marksman Specification:
Total Power
Current
Dimension
Board Holder Lightning
Board Holder Marksman
Reflow Nozzles included
Bottom Heater
Temperature
Reflow Air Velocity
Component Pick Up
Profile Controller
External Profile Generation
Program Development
Board Alignment
Reflow Operation
Maximum Board Size
Weight
Communication
Operational Software
110–220V 2100 Watts
25 Amps @ 110V, 15 Amps @ 220V
21.75" x 29.12" (552 x 740 mm)
Frame 8" x 12" (203 x 304 mm)
Frame 14" x 16" (355 x 406 mm)
Three Nozzles of Choice
Panel Heater 1200 Watts
Select Celsius or Fahrenheit
Internal Motor <12.7 CFM
Internal Pump -Shop Air option
On-Board-Computer 16 profiles
Pentium IV with 17” Monitor
Thermocouple Bank (4 x TC)
Micrometer Controls
Close Loop
14" x 16"(355 x 406 mm)
125 lb (56.81kg)
RS232
7000-1250 included
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
APE Sniper III Split Vision Rework System
Overview
The Sniper III is a rigidly constructed automatic placement system designed for high production rework environments.
One station of the Sniper III removes the device, the other station places a new component. A monitor reflects the
image of the bottom of the chip and the footprint on the board. These are then adjusted to exactly overlay each other
and the component placed automatically. The part is then reflowed.
Energy Reflow
Precision
Programming and Operation
The Sniper III Rework system combines the unique Energy Reflow
operation of the Flo-Master with the
latest technology in optic engineering and alignment design. These features provide absolute control in
positioning ultrafine pitch, Micro
BGA, QFP, and CSP’s (Chip Scale
Packages), together with large
ceramic or plastic BGA devices.
Once aligned, the component is
automatically positioned by
pneumatic control, lifting the camera
system clear of the placement vector.
A Vertical Placement Drive (VPD)
accurately orients the component to
the contact land pattern.
The Sniper III includes an On-Board
Computer and an external Pentium IV
computer with color monitor.
Programs are generated using
Graphical Display Window Software
(GDW). Programs are uploaded to the
On-Board-Computer.
Vacuum Pick-Up
A Venturi Vacuum Pick-Up system
supports the component during
alignment and automatically snap
releases the component during
placement.
Order Information
Part #
Description
7750-0033
Sniper III 110V 60Hz
7500-0034
Sniper III 220V 50Hz
Stand alone Sniper unit available as Sniper II
unit no PC and software.
Sniper III Specification:
Power
Current
Dimension
Board Holder Standard
Reflow Nozzles included
Preheat Nozzles included
Temperature
Reflow Air Velocity
Component Pick Up
Factory Air
Reflow Operation
Maximum Board Size
Maximum component size
Air Flow
Weight
Communication
Controller
Profile Generation
Operational Software
Profile Pattern Development
110–220V 1800 Watts
25 Amps @ 110V, 15 Amps @ 220V
21.75" x 29.12" (552 x 740 mm)
12" x 16" (305 x 406 mm)
See Flo-Master Page 12
See Flo-Master Page 12
Select Celsius or Fahrenheit
Internal Motor <12.7 CFM
Venturi Generator Reflow & Imaging
60-80 psi for Placement System
Close Loop
16" x 20"(406 x 508 mm)
2” x 2” (50.8 x 50.8mm)
Up to 1 CFM
165 lb (75 kg)
RS232 Sniper III Only
On-Board-Computer
Pentium IV with Monitor included
On-Board-Computer and Specview Graphic Display
Thermocouple Bank with 4 Thermocouples
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
17
Sniper-WB “Wide Body” Split Vision Rework System SMD-7007
Overview
The Sniper-WB is a higher-powered machine designed to handle large PCBs with components requiring special attention.
Large PCBs and larger SMT components require careful underboard heating, covering a wide area to avoid warping.
The Sniper-WB includes a 3600 watt convection Hot Air Panel Heater and a total of 4800 watts including reflow.
Sniper-WB
The Sniper-WB Wide Body will rework
PCBs as small as 2” x 2” and as large
as 20” x 24” (508 x 610 mm) {larger
on special request}. Its powerful
under board heater stabilizes the
entire PCB and gently neutralizes the
warping of large PCB surface areas.
This is achieved by a 3600 Watt high
energy convection Panel Heater and a
1200 Watt Reflow Heater, total
energy is 4800 Watts.
Low Temperature Benefits
The high energy capacity of the
Sniper-WB reduces the temperature
required to reflow. This feature is
important in reworking TBGA
components. The surface of these
components are often metal and can
warp if exposed to high temperatures
for extended periods. Once the chip
is warped it cannot recover.
Many other components can benefit
from this feature, CCBGA, PBGA and
large QFP packages all demand
simultaneous collapse and moderate
reflow temperatures.
Thermocouple (TC) Bank
The integrated TC Bank provides 4
Thermocouple outputs, which can be
used to develop a profile pattern,
when used with the external computer software (7000-1250) provided.
Note that the TC Bank is used for
development and need not be used
in production.
Programming and Operation
The Sniper-WB includes an On-Board
Computer and an external Pentium IV
computer with 17” color monitor.
Programs are generated using the
Graphical Display Window Software
(GDW) included. Programs are
uploaded to the On-Board-Computer.
Rework patterns can either be run
from the computer or from the OnBoard-Computer.
18
Axis Adjustment
Micrometer XYZ adjustment is provided on the Board Holder with a motorized
Theta axis switch control. Theta in this manner is always “true” and referenced
to the component not the PCB.
Order Information
Part #
Description
7007-7007
Sniper-WB 220V 50/60Hz (220V Model only)
Sniper-WB Specifications:
Total Power
Current
Dimension
Board Holder
Reflow Nozzles included
Bottom Heater
Temperature
Reflow Air Velocity
Component Vacuum Pick-Up
Factory Air
Reflow Control
Bottom Controller
Alignment
Component Theta
Air Flow
Weight
Optional Features
220V 50/60 Hz 4800 Watts
22 Amps, Operational 30 Amps
32.63”x 22.75” x 33” (828.80 x 577.85 x 838.20 mm)
20" x 24" (508 x 610 mm)
See Flo-Master Page 12
2400 Watts Forced Air Convection Panel Heater
Celsius or Fahrenheit Selectable
12.7 CFM
Venturi
80 psi Dry Regulated
On-Board-Computer 16 Profiles
PID Fuzzy Logic 4 Profiles
XY Table with Z-Axis
Motorized
1 CFM per operation
120 lbs ( 54.55 Kilos)
Nitrogen Preheat and Pen Cam
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: sal[email protected]
Sniper II, Sniper III & Sniper Wide-Body Split Vision Rework System features
Look Up Look Down
On-Board Computer
The DABIS Prism permits the contact
array of the component to be
viewed from the underside and
superimposed over an image of the
contact land pattern on the PCB.
All systems can be operated without
an external computer directly from
the On-Board-Computer. This controller can run pre-programmed
Profile Patterns. The Bottom Heater is
automatically controlled by the onboard computer ensuring complete
process control.
Component Alignment
Precision Micrometers align the two
lead patterns; the camera’s zoom and
focus are adjusted to comfortably
align and view the PCB and
component on the monitor.
Focus and Split
Using a prism simplifies the alignment
procedure and ensures repeatability
during continuous operation. It is also
possible to view many different types
of components without additional
setup. To view the diagonal corners of
very large components, an optional
Macro Imager 7000-2500 can be
inserted when required.
Rotary/Staged Vacuum
Board Holder
Sniper II and Sniper III machines
include a standard 12" x 16" (305 x
406 mm) vacuum actuated Board
Holder, which quickly glides to position. Precision micrometers adjust in
X- and Y-axis and the Rotary/Staged
feature of the table provides “Theta.”
Optional Board Holder Kits are
available for smaller and larger board
types.
The On-Board-Computer stores up to
sixteen (16) multi-segment (Ramp &
Soak) profiles. Any number of profiles
may be stored on the PC. Programs
can be created and entered directly
on the Top Reflow Controller keypad
or created using the PC and
Graphical Display software (included).
Data Logging of events is provided in
PDF format. The rework cycle is automatically controlled and shut off after
completion.
Graphical Display Window
(GDW)
Vertical Placement Drive (VPD)
When placing delicate components to
fine tolerances, emphasis on stability
of engineering is a priority, the
reinforced VPD provides a stable final
positioning operation, and is
adjustable in the Z-axis for pressure
sensing.
Profile Control
The computer software provided
operates in a Windows-based
environment. Profile Pattern Recipes
are easily created, stored, recalled,
and edited using a Graphical Display
Window (GDW).
Thermocouple (TC) Bank
Sniper III & Sniper
WideBody only
Thermocouples are used to develop a
Rework Thermal Profile. Placing thermocouples strategically in and around
the component environment during
the creation of a profile will assure an
optimum profile pattern for the
rework process. Note that the TC
Bank is used for development and
need not be used in production.
Nitrogen Preheat & Pencam
An optional Nitrogen Preheat injecNitrogen & Pencam (Sniper options) tion system is available. Nitrogen is
preheated and injected into the
Nitrogen Preheat
7000-NITR
selected reflow cycle for a nitrogen
7000-PCAM Reflow Pen Cam
rich atmosphere. Optional Pencam
can be installed to watch solder balls
reflow and collapse. Can also be
used for inspection during the job
and after completion of the work for
visual inspections.
P300-00
129.1
0.0
1:1
Client/Job #:
APE
00:01
-5.0
Seg 1 Temp: 225.0
Seg 1 Time: 00:28
Seg 2 Temp: 325.0
Seg 2 Time: 00:28
Seg 3 Temp: 400.0
Seg 3 Time: 00:45
Seg 4 Temp: 425.0
Seg 4 Time: 00:28
Seg 5 Temp: 450.0
Seg 5 Time: 01:00
Seg 6 Temp: 425.0
Seg 6 Time: 00:28
Seg 7 Temp: 375.0
Seg 7 Time: 00:45
Seg 8 Temp: 0.0
Seg 8 Time: 00:00
Segments 1-8
Mon Dec 20 Click: Label for Scale, Chart for Cursor
P300-00.PV P300-00.SP
130.1
0.0
600.0
[Setup]
Seg 11 Temp: 0.0
Seg 11 Time: 00:00
Seg 12 Temp: 0.0
Seg 12 Time: 00:00
350.0
Seg 13 Temp: 0.0
Seg 13 Time: 00:00
Seg 14 Temp: 0.0
Seg 14 Time: 00:00
225.0
100.0
[Help]
Seg 9 Temp: 0.0
Seg 9 Time: 00:00
Seg 10 Temp: 0.0
Seg 10 Time: 00:00
475.0
14:15
14:16
14:17
14:18
APE South
305.451.4722
WWW.APECORP.COM
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
14:19
14:20
Seg 15 Temp: 0.0
Seg 15 Time: 00:00
Seg 16 Temp: 0.0
Seg 16 Time: 00:00
Segments 9-16
19
Essential Supplies for Rework and Repair
Aids for Rework and Repair
A key ingredient to successful repair is to use a system of high quality cleansing and preparation materials to remove
and replace a component. APE SMT products have been specifically formulated for rework and their use will assist in a
professional reconstruction.
Rework SMT Tool Kit 8100-1097
The 8100-1097 SMT Tool Kit has been especially formulated for Motorola,
and includes a special blend of tools and materials, providing the highest
quality rework possible.
Kit includes:
Part #
Description
8100-1097
SMT Tool Kit
• Dental quality probes
• SMD pad prep cleaner pen
• Tweezers for efficient
component handling
• Assorted flux and fluid
dispensing needles
• Solder wick gun
• No-clean BGA wetting
solution
• No-clean rework
formulated flux
• Double sided flux and
prep brush
Consumable Rework Materials:
No-clean Flux Paste Kit
APE No-Clean Flux is a high-quality especially formulated material and is the choice
of many professionals to ensure a successful rework procedure. Ideal for Lead-Free
processes.
Part #
Description
8200-1310
8200-1325
8200-1327
Flux Paste Kit with 8 x 5cc syringes
Flux Paste Kit with 25 x 5cc syringes
Flux Paste Kit with 100 x 5cc syringes
20
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Essential Supplies for Rework and Repair
No-Clean Liquid Flux Wetting Solution Kit
Wetting Solution Kit
•
•
•
•
BGA Preparation
BGA Installation
Oxidation Removal
Hot Air Reflow
Part #
Description
8200-1330
8200-1331
8200-1335
BGA Wetting Solution with 6 – 1 oz. bottles
BGA Wetting Solution with 8 pen kit
BGA Wetting Solution with 48 – 1 oz. bottles
PCB Pad-Prep Pen Kit
Pad Prep Kit
• Pad Cleaning
• Conformal Coating
Removal
• General Cleaning
Part #
Description
8200-1350
8200-1361
Pad Prep Pen Kit (organic) with 8 pens
Cleaning Solution (organic) with 8 – 1/2 oz. bottles
No-Clean Solder Paste kit
No-clean Solder Paste Kit
• QFP, PLCC, LCC
Pad Prep
• Tin BGA Pads
• PA Pad Prep
Part #
Description
8200-1320
8200-1322
8200-1323
No-clean Solder Paste Kit with 8 – 5cc syringes
No-clean Solder Paste Kit with 25 – 5cc syringes
No-clean Solder Paste Kit with 100 – 5cc syringes
Wick Gun Kit
General Consumables Kit
• BGA, C-5 Pad Prep
• General Light
Desoldering
• General Assortment
of Kit Supplies
Part #
Description
Part #
Description
8200-1305
8200-1306
Wick Gun Kit with 5 cartridges
Wick Gun Only
8100-2300
General Consumable Kit
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
21
SMD-2000M SMT/PTH Self Contained Repair System
Overview
The APE SMD-2000M Self Contained SMT/PTH Repair & Desolder system is the ideal station for sensitive expensive electronic circuit repair. The SMD-2000 is a surface mount and conventional component repair and rework station. This allin-one station is capable of electroplating, drilling/grinding, conventional soldering, desoldering, paste dispensing, hot
wire stripping, conformal coating removal and many other uses. One station for all of your circuit board repair needs.
Standard System Includes:
1700-0060
1700-6700
2200-0130
2900-0132
3550-0602
3550-6000
4000-8402
6000-2400A
6000-2500
5000-8404
6000-0286
6730-3803
6910-2700
8000-0100
SMT & Through-Hole Rework
SMD-2000M Rework and manufacturing system performs surface
mount and conventional repairs. Temperature is electronically
controlled from 450 to 900F (232 to 482C). Two programmable
digital controllers feature responsive closed-loop temperature control with large LED readouts, indicating “Set” and “Operating”
temperatures.
Track and Trace Repair
Precision Drilling, Grinding, Cutting and sanding circuit boards
capable with optioinal Cirk Grind System. It removes coating,
cuts circuits, cuts leads, drills holes, cuts slots, shapes FR4 and
performs many other procedures using various interchangeable
bits.
Gold Contact Repair
Optional:
0690-0002
2300-0132
2400-0133
2700-0001
6000-2600
6000-5000
6000-5001
6000-5002
6000-5200
6000-6780
6700-1394
6700-8717
6700-8719
6910-4229
7300-0060
Repair Gold finger contacts on circuit boards, but the optional
Quick Plate Kit can be used to electroplate a variety of materials,
e.g., lead, tin, copper to nickel, aluminum, and gold. Cleans and
electroplates printed circuit board connector contacts and other
electronic assemblies
Model
Part #
Description
SMD-2000EM
SMD-2000EM
SMD-2000DM
SMD-2000DM
SMD-2000EMP
SMD-2000EMP
SMD-2000M
SMD-2000M
6200-0003
6200-2005
6200-0005
6200-2004
6200-0008
6200-2008
6200-0009
6200-2009
(EM) Domestic Version Complete (110V)
(EM) Domestic Version Complete (220V)
(DM) Domestic Version Complete (110V)
(DM) Domestic Version Complete (220V)
(EMP) Domestic Version Complete (110V)
(EMP) Domestic Version Complete (220V)
(M) Domestic Version Complete (110V)
(M) Export Version Complete (220V)
Safety Rating:
USA
USA
USA
EUROPE
22
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
SMD Hot Air Jet Reflow tool
EX-1700 Desolder Handpiece
Resistive Tweezer with Tips
Thermal Parting Unit
Dual Holder Assembly
SMD Thermal Holder
Power Cord (110V)
Thermal Tweezer Handpiece 24V
Vacuum Pick and Place Wand
Electric Foot Pedal w/ plug
Cushion Grip Desolder Extractor
MTD Cleaning Unit Assembly
SMT/PTH Solder Iron w/ Tip (24v, 5wire)
Power Cord (220V)
Quick Plate Kit
Conductive Tweezers with Tips
Thermal Strippers with Tips
Therm-Tool Kit
SMD ThermoVac Tool
Solder Paste Kit
Tip Holder
Solder Paste Holder
Assortment Kit
Drill Kit Assortment (Cirk Grind)
Starter Consumable Kit
Spare Kit
One Year Consumable Kit
Dispensor Kit
Cirk Grind System, Complete w/
Accesories
Before
After
Specifictions:
Total Power
Current
Dimension
Temperature
Range
Weight
Internal Vacuum Supply
110V/220V 50/60 Hz 2400 Watts
16.36 Amps @ 110V, 10.91 Amp @ 220V
15”x 12.5” x 6” (381 x 304 x 152 mm)
Celsius or Fahrenheit Selectable
450 to 900°F (232 to 482°C)
29 lbs ( 13.15 Kilos)
4” to 20” Hg.
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
SMT Solder and Tweezer System EX-755
Dual Operation
An advanced compact digital
controlled production soldering and
SMD component rework system,
suitable for high-capacity soldering
and temperature-regulated
installation and removal of
PLCC/SOIC types, together with chip
resistors and capacitors.
Autotune
Programmable digital Autotune
controllers provide continuous
regulated temperature control for the
soldering and “Chip Tweez” modules,
with operating temperatures easily
visible in large clear LED displays.
System Includes:
6910-2700
6000-2400A
3550-0600
3550-6000
6000-0286
1212-2311A
1212-2701
0700-0700
Sensor Soldering Iron
60 Watt, 24V
Thermal Tweezer Handpiece
Cleaning Station Holder
Tweezer Holder
Handpiece Insulator
Tweezer Chip Tip
Iron Tip 1/32" Conical
Manual
Specifications:
Model Part #
Dimension 10.20" x 8.50" x 4.75"
(25.90 x 21.60 x 12.00 cm)
Weight
14.5 lb (6.58 Kg)
Range
450 to 900°F (232 to 482°C)
Idle
2°F
Switching Zero Voltage Thyristor
EX-755 0755-0002 Dual System 60 Hz 110V
EX-755 0755-2000 Dual System 50 Hz 220V
Description
Safety Rating:
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
Digital Tweezer System SMD-625
Thermal Control
The SMD-625 is a closed loop
thermal control SMT “Chip Tweez”
rework system providing digital
controlled installation and removal
of small PLCC/SOIC type components
together with chip resistors and
capacitors.
System Includes:
SMD-625
Power Source
6000-2400A Thermal Tweezer Handpiece
6000-0286A Tweezer Handle Insulator
3550-6000 Tweezer Holder
1212-2311A Tip Pair for Chip Devices
Model
Part #
Description
SMD-625 0625-2400 Chip Tweez
60 Hz 110V
SMD-625 0625-2402 Chip Tweez
50 Hz 220V
Optional Tips:
Specifications:
1212-2311A Tip Pair for Chip
Component (Included)
1212-2310A Tip Pair SOT 23/143
1212-2308A Tip Pair SOIC 8
1212-2314A Tip Pair SOIC 14
1212-2316A Tip Pair SOIC 16
1212-2320A Tip Pair SOIC 20
1212-2324A Tip Pair SOIC 24
Dimension 6.00" x 5.00" x 2.75"
(15.24 x 12.70 x 6.98 cm)
Weight
3.5 lb (1.58 Kg)
450 to 900°F (232° to 482°C)
Range
Idle
2°F
6000-7700
Tip Retaining Screw,
Pack of 10
Safety Rating:
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
23
SMT & Through-Hole Rework System EX-750
Vacuum Pick
and Place Wand
The EX-750 Rework and manufacturing system performs
surface mount and conventional component repairs. Tip
temperature is electronically controlled from 450 to
900°F (232 to 482°C). Two programmable digital
controllers feature responsive closed-loop temperature
control with large LED readouts, indicating “Set”
and “Operating” temperatures.
Conventional Through-Hole Operation
Conventional Desoldering is enabled through an instantrise, high-volume internal vacuum pump connected to
the Desolder Handpiece. A “Cool Sleeve” is supplied
to ensure operator comfort. A new Stop Clog filter
removes flux fumes and solids, preventing
contamination of the vacuum pump.
BGA Site Preparation
Thermal Chip
Tweezer
SMT Through-Hole
Soldering Iron
Part #
Description
EX-750
0750-0002
EX-750
0750-2002
Mix Tech System
60 Hz 110V
Mix Tech System
50 Hz 220V
Optional:
6000-2500 Vacuum Pick and Place Wand
6700-8717 Spares Kit
2570-0025 Standard Track Repair Kit
6700-1394 Starter Consumable Kit
6700-8719 One Year Consumable Kit
Specifications:
Thermal
Quad-Pack Tweezer
The Desolder Handpiece may also be used to remove
residue solder from reworked spheres on BGA patterns.
Model
EX-750 Includes:
6910-2700 Sensor Soldering Iron
60 Watt, 24V
6000-2400A Thermal Tweezer Handpiece
3550-0600 Cleaning Station Holder
3550-6000 Tweezer Holder
3550-0602 Dual Tool Holder
1700-6700 Desolder Handpiece 24V, 60 Watt
1700-0060 Hot Air Handpiece 24V, 60 Watt
5000-0531 Internal Pump 110V
5000-0631 Internal Pump 220V system only
6000-0286 Tweezer Handpiece Insulator
1212-2311A Tweezer Chip Component Tip
1212-2701 Solder Iron tip 1/32" Conical
6700-0112 Desolder Heater Cleaning Brush
6700-0010 Glass Tube Cleaning Brush
6700-4223 Desolder Tip Kit
3000-5002 Fixed Stop-Clog Filter Assembly
0700-0700 Manual
5000-8404 Foot Pedal
Dimension 10.20" x 8.50" x 4.75",
(25.90 x 21.60 x 12.00 cm)
Weight
14.5 lb (6.58 kg)
Range
450 to 900°F (232 to 482°C)
Idle
2°F
Switching Zero Voltage Thyristor
Safety Rating:
Desolder Tool
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
For replacement Desolder Tips and Solder Tips, see page 29.
Chipper Plus CX-750
A combination system, which
includes the EX-750 and the new
Chipper Hot Air SMT Rework System
featured on pages 2 and 3.
Mixed Technology
These two products provide an
economic versatile solution to mixed
technology applications, requiring
Through-Hole, Contact and Hot Air
SMT features.
Model
Part #
Description
CX-750
0750-0003
CX-750
0750-2003
Plus System
60 Hz 110V
Plus System
50 Hz 220V
24
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Digital Solder & Desolder Station EX-700
Closed-Loop Digital Control
EX-700 Includes:
Model
Part #
Description
A Digital Closed-Loop Sensor
controlled Solder & Desolder Station
with SMT upgrade features,
represents an ideal manufacturing
and rework system for sensitive
components.
6910-2700
EX-700
0700-0002
EX-700
0700-2000
50 Hz 220V
Rework System
60 Hz 110V
Rework System
Desoldering
3550-0602
1212-2701
6700-0112
6700-0010
6700-4223
3000-5002
0700-0700
5000-8404
Desoldering is enabled through an
instant-rise, high volume internal
vacuum pump connected to the
Desolder Handpiece. A “Cool Sleeve”
is supplied to ensure operator
comfort. A new Stop Clog filter
removes flux fumes and solids,
preventing contamination of the
vacuum pump.
Upgrading
The standard Through-Hole Desolder
Tool and Soldering Iron may be
interchanged with optional SMD
Tweezers, Hot Jet Flow, or Vacuum
Pick and Place Wand.
1700-6700
5000-0531
5000-0631
Sensor Soldering Iron
60 Watt, 24V
Desolder Handpiece
60 Watt, 24V
Vacuum Pump 110V
Vacuum Pump 220V
system only
Dual Iron Holder
Solder Iron Tip 1/32" Conical
Desolder Heater Cleaning Brush
Glass Tube Cleaning Brush
Desolder Tip Kit
Fixed Stop-Clog Filter Assembly
Manual
Foot Pedal
Optional:
6000-2500
6000-2400A
3550-6000
6000-0286
1700-0060
6700-8717
2570-0025
6700-1394
6700-8719
Vacuum Pick and Place Wand
Thermal Tweezer Handpiece
Tweezer Holder
Tweezer Insulator
Hot Air Jet Tool 24V, 60 Watts
Spares Kit
Standard Track Repair Kit
Starter Consumable Kit
One Year Consumable Kit
Time required
to reach the
maximum
vacuum
Specifications:
Dimension 11.50" x 8.50" x 6.75"
(29.10 x 21.60 x 17.14 cm)
Weight
12.5 lb (5.6 kg)
Range
450 to 900°F (232 to 482°C)
Idle
2°F
Switching Zero Voltage Thyristor
Safety Rating:
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
A.P.E. Systems offer
quick vacuum response,
which is the most
critical factor
Before
After
Multilayer Desoldering
Digital Desolder Station (Factory Air) EX-680
Digital Temperature Control
Specifications:
Safety Rating:
A powerful and economic
Desoldering system for leaded
components, featuring a large LED
display for temperature set, operation
and operator lock out. Vacuum is
achieved through an in-house air
supply, filtered and regulated from
60 to 120 psi; a PNEU-VAC foot
pedal activates a Venturi system
for an instant vacuum force of
20 to 23" Hg.
EX-680 Includes:
1700-6700 Desolder Handpiece 24V,
60 Watts
9000-0053 PNEU-VAC Foot Pedal Venturi
3550-0600 Cleaning Station Holder
6700-4223 Tip Kit
6700-0112 Desolder Heater Wire Cleaning
Brush
6700-0010 Glass Tube Cleaning Brush
3000-5002 Fixed Stop-Clog Filter Assembly
0680-0680 Manual
Dimension 6.00" x 5.00" x 2.75"
(15.24 x 12.70 x 6.98 cm)
7.00 lb (3.18 kg)
Weight
Range
450 to 900°F (232 to 482°C)
Idle
2°F
Switching Zero Voltage
Thyristor
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
Model
Part #
Description
EX-680
0680-0000
EX-680
0680-2000
Desolder System
60 Hz 110V
Desolder System
50 Hz 220V
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
25
Digital Solder Station EX-685
Closed-Loop Digital Control
A Sensor controlled digital soldering
system for heavy duty, fast response
manufacturing and rework
applications. A closed-loop sensor
provides constant feedback with
sensitivity of 2°F.
Designed for Comfort
EX-685 Includes:
Safety Rating:
6910-2700 Sensor Soldering Iron
24V, 60 Watt
1212-2701 Solder Iron Tip 1/32" Conical
6730-3803 Iron Holder & Cleaning Assembly
0685-0685 Manual
4000-8402 Power Cord 110V
8000-0100 Power Cord 220V system only
The Soldering Iron handpiece has
been ergonomically designed for
constant use without operator
fatigue. A quick release element
cover allows easy tip change.
Model
Part #
Description
EX-685
0685-0000
EX-685
0685-2000
Soldering System
60 Hz 110V
Soldering System
50 Hz 220V
Performance
Specifications:
Zero voltage switching and MIL spec
grounding ensure minimal leakage
of less than 2mV.
Dimension 6.00" x 5.00" x 2.75",
15.24 x 12.70 x 6.98 cm
Weight
6.00 lb (3.18 kg)
Range
450 to to 900°F
(232 to 482°C)
Idle
2°F
Switching Zero Voltage Thyristor
Easy View
Large LED Displays register set point
and operating temperature. The
controller also features an operator
Lock Out for process control.
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
Analog Desolder Station (Factory Air) EX-675
Economy Desoldering
System
Model
Part #
Description
EX-675
0675-0000
An economic Desoldering System for
high volume production, touchup,
and repair. Vacuum is achieved
through an in-house air supply,
filtered and regulated from 60 to120
psi; a PNEU-VAC foot pedal activates
a Venturi system for an instant
vacuum force of 20 to 23"Hg.
EX-675
0675-2000
Desoldering System
60 Hz 110V
Desoldering System
50 Hz 220V
EX-675 Includes:
1500-6700
9000-0053
3550-0600
6700-4223
6700-0112
6700-0010
3000-5002
0675-0675
26
Specifications:
Safety Rating:
USA
USA
USA
EUROPE
MIL-STD-2000-A
MIL-S-45743E
WS-6536E
CE
Dimension 2.75" x 4.875" x 2.75"
(6.98 x 12.38 x 6.98 cm)
Weight
5.00 lb (2.27 kg)
Range
380 to 850°F (193 to 454°C)
Idle
2°F
Switching Zero Voltage Thyristor
Desolder Handpiece 110V,
35 Watts
PNEU-VAC Foot Pedal Venturi
Cleaning Station Holder
Tip Kit
Desolder Heater Wire
Cleaning Brush
Glass Tube Cleaning Brush
Fixed Stop-Clog Filter Assembly
Manual
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Parts for Desolder Handpiece
Parts for Desolder Handpiece
The Desolder Handpiece includes consumable parts which
require replacement from time to time. This section lists
the parts which are appropriate for the EX-1700 (24V) and
EX-1500 (110V) Desolder Handpiece models featured
in this catalog.
The following columns list the parts for each of the Desolder
Handpiece assemblies, which may be referenced from the
exploded detail.
Handpiece
EX-1700 (1700-6700)
For EX-750, 700, 680 Sensor
Handpiece
EX-1500 (1500-6700)
For EX-675, Non-Sensor
1 Desolder Tips (see below)
2 6700-1724
Heater & Seal Assy 24V, 37 Watt
3 6700-1760
Heater & Seal Assy 24V, 60 Watt (AirJet)
4 6700-3200
Glass Tube
5 6700-4100
“S” Baffle
6 6700-0100-P25 Glass Tube Filter Felts
7 6700-3813-P2
Heater Insulator
8 6700-7017-P3
Heater Retaining Screws
9 6700-7700-P10 Set Screws
10 6700-7201
Forward Seal
11 6700-7200
Rear Seal
12 6700-7302
End Cap Retaining Clip
13 6700-7300
End Cap Assembly
14A 7000-8790
Tubing 5 feet length
14B 7000-8701
Tubing 12 feet length (EX-680, EX-675)
15 6700-0287
Handpiece Replacement Assembly
16 4000-8417
24V Power Cord (Din)
17 6700-0112-P5
Desolder Tube Wire Brush
18 6700-0010-P5
Glass Tube Cleaning Brush
19 6700-2002-P5
Hose Clamps for Tubing
20 3000-5002
Filter Fixed Stop Clog
21 3000-5003
Filter Replaceable Stop Clog
22 3000-5001-P10 Replaceable Filter Element
23 6700-8799
Quick Disconnect
24 6700-0286
Handpiece Insulator
Complete Handpiece Assembles:
1700-6700 Desolder Sensor Handpiece 24V, 60 Watt
1500-6700 Desolder Handpiece 110V, 40 Watt
1 Desolder Tips (see below)
2 6700-0045
Heater & Seal Assy 110V, 40 Watt
3 6700-0060
Heater & Seal Assy 110V, 60 Watt
4 6700-3200
Glass Tube
5 6700-4100
“S” Baffle
6 6700-0100-P25 Glass Tube Filter Felts
7 6700-3813-P2
Heater Insulator
8 6700-7017-P3
Heater Retaining Screws
9 6700-7700-P10 Set Screws
10 6700-7201
Forward Seal
11 6700-7200
Rear Seal
12 6700-7302
End Cap Retaining Clip
13 6700-7300
End Cap Assembly
14A 7000-8790
Tubing 5 feet length
14B 7000-8701
Tubing 12 ft length (EX-680, EX-675)
15 6700-0287
Handpiece Replacement Assembly
16B 6700-4000
110V Power Cord
17 6700-0112-P5
Desolder Heater Wire Brush
18 6700-0010-P5
Glass Tube Cleaning Brush
19 6700-2002-P5
Hose Clamps for Tubing
20 3000-5002
Filter Fixed Stop Clog
21 3000-5003
Filter Replaceable Stop Clog
22 3000-5001-P10 Replaceable Filter Element
23 6700-8799
Quick Disconnect
24 6700-0286
Handpiece Insulator
Tips for Desolder Handpiece
Replacement Tips for APE Desolder Extractor Handpiece and other manufacturers of similar Desoldering equipment.
Standard Desoldering Tips
Part #
1212-0225
1212-0440
1212-0550
1212-0660
I.D. Nominal
mm
in.
0.025 0.630
0.036 0.910
0.050 1.270
0.060 1.520
O.D. Reference
mm
in.
0.060 1.520
0.072 1.830
0.085 2.160
0.085 2.160
2" Long Desoldering Tips
Part #
1212-2025
1212-2040
1212-2060
I.D. Nominal
mm
in.
0.025 0.630
0.036 0.910
0.060 1.520
O.D. Reference
mm
in.
0.060 1.520
0.072 1.830
0.085 2.160
Angle Desoldering Tips:
Part #
1212-2125
1212-2136
1212-2160
I.D. Nominal
in.
mm
0.025 0.630
0.036 0.910
0.060 1.520
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
O.D. Reference
in.
mm
0.060 1.520
0.072 1.830
0.085 2.160
27
PCB Track Repair Kits
Overview
Carefully designed and convenient kits for the repair of printed circuit board tracks. A.P.E. Kits were originally designed
for “on the spot” circuit repairs by the National Guard and are regularly used in military repair operations and by
manufacturers in rework applications.
Master Track Repair Kit 2570-4000
Standard Track Repair Kit 2570-0025
Part #
7293-2850
2000-0002
5000-0117
2570-0111
5301-0118
2570-2570
Part #
7293-3522
2000-0000
2590-1524
2570-0111
2580-1394
2570-2570
Qty
1
1
1
1
1
1
Description
Master Frame Kit
Master Funnelet/Eyelet Kit
Abrasive Stick
Setting Tool
Bonding Kit
Manual
Qty
2
6
1
1
1
1
Description
Master Frames
Funnelet/Eyelet Kits
Track Tool Set
Setting Tool
Consumable Kit
Manual
Basic Track Repair Kit 2570-0010
Part #
7293-3522
2000-0000
2570-0111
2570-2570
Qty
2
6
1
1
Description
Master Frames
Funnelet/Eyelet Kits
Setting Tool
Manual
Track Frames
Master Frame
7293-3522
28
Frame A-Y
7103-2936
Frame A.B.C.
7114-0934(A)
Conductor Frame
7113-2634
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Thru-Hole Repair
Funnelets and Eyelets
Precision thru-hole layer connectors
for repair of PCB route connections,
available in Funnelet or Eyelet designs
(see chart). Many other sizes available
upon request.
A.P.E.
Part
Number
Outside
Diameter
of Barrel
Length
Under
Flange
Flange
Diameter
at Pierce
in. (mm)
in. (mm)
in. (mm)
Minimum
Inner
Diameter
in. (mm)
Range
Style
Type
Board
Thickness
in. (mm)
2000-0003*
2000-0010
2000-0014
2000-0018
2000-0023
2000-0025
2000-0038
2000-0043*
2000-0046
2000-0048
2000-0053*
2000-0055
2000-0058
2000-0098
2000-0203
2000-0205
2000-0206
2000-0207
2000-0208
2000-0210
2000-0222*
2000-0225
2000-0230
2000-0235
2000-0240
2000-0246
2000-0258
2000-0478*
2000-0858
2000-0865
2000-1083
2000-1084
2000-1088
.040 (1.016)
.068 (1.727)
.030 (.7620)
.046 (1.168)
.059 (1.498)
.038 (.9652)
.047 (1.193)
.121 (3.073)
.60 (1.524)
.047 (1.193)
.152 (3.860)
.040 (1.016)
.047 (1.193)
.059 (1.498)
.030 (.7620)
.047 (1.193)
.046 (1.168)
.047 (1.193)
.030 (.7620)
.046 (1.168)
.048 (1.219)
.059 (1.498)
.047 (1.193)
.030 (.7620)
.030 (.7620)
.046 (1.168)
.030 (.7620)
.152 (3.860)
.030 (.7620)
.030 (.7620)
.078 (1.981)
.031 (.7874)
.039 (.9906)
.093 (2.362)
.102 (2.590)
.073 (1.854)
.052 (1.320)
.093 (2.362)
.047 (1.193)
.093 (2.362)
.093 (2.362)
.088 (2.235)
.118 (2.997)
.093 (2.362)
.075 (1.905)
.085 (2.159)
.127 (3.225)
.094 (2.387)
.125 (3.125)
.100 (2.540)
.062 (1.574)
.174 (4.419)
.075 (1.930)
.155 (3.937)
.127 (3.225)
.062 (1.574)
.174 (4.419)
.120 (3.048)
.088 (2.235)
.028 (.7112)
.120 (3.048)
.054 (1.371)
.088 (2.235)
.115 (2.920)
.088 (2.235)
.051 (1.295)
.060 (1.524)
.114 (2.895)
.046 (1.168)
.082 (2.082)
.105 (2.667)
.065 (1.651)
.082 (2.0828)
.200 (5.080)
.095 (2.413)
.080 (2.032)
.245 (6.223)
.062 (1.574)
.072 (1.828)
.095 (2.413)
.046 (1.168)
.080 (2.032)
.076 (1.930)
.080 (2.032)
.046 (1.168)
.076 (1.930)
.074 (1.879)
.095 (2.413)
.080 (2.032)
.046 (1.168)
.046 (1.168)
.080 (2.032)
.046 (1.168)
.245 (6.223)
.046 (1.168)
.046 (1.168)
.110 (2.794)
.055 (1.397)
.062 (1.575)
.026 (.6604)
.058 (1.473)
.021 (.5334)
.035 (.8890)
.046 (1.168)
.026 (.6604)
.035 (.8890)
.096 (2.438)
.046 (1.168)
.035 (.8890)
.132 (3.352)
.026 (.6604)
.036 (.9144)
.046 (1.168)
.021 (.5334)
.036 (.9144)
.034 (.8636)
.036 (.9144)
.021 (.5334)
.034 (.8636)
.034 (.8636)
.046 (1.168)
.036 (.9144)
.021 (.5334)
.022 (.5588)
.034 (.8636)
.021 (.5334)
.137 (3.479)
.021 (.5334)
.021 (.5334)
.066 (1.676)
.021 (.5334)
.027 (.6858)
Eyelet
Eyelet
Eyelet
Funnelet
Eyelet
Funnelet
Funnelet
Eyelet
Funnelet
Funnelet
Eyelet
Funnelet
Funnelet
Funnelet
Eyelet
Eyelet
Eyelet
Eyelet
Eyelet
Eyelet
Eyelet
Funnelet
Funnelet
Eyelet
Eyelet
Funnelet
Eyelet
Eyelet
Eyelet
Eyelet
Funnelet
Funnelet
Funnelet
.062 (1.588) 1/16
.062 (1.588) 1/16
.046 (1.910) 3/64
.062 (1.588) 1/16
.062 (1.588) 1/16
.031 (0.794) 1/32
.062 (1.588) 1/16
.062 (1.588) 1/16
.062 (1.588) 1/16
.093 (2.381) 3/32
.062 (1.588) 1/16
.062 (1.588) 1/16
.046 (1.910) 3/64
.093 (2.381) 3/32
.062 (1.588) 1/16
.093 (2.381) 3/32
.062 (1.588) 1/16
.031 (0.794) 1/32
.125 (3.175) 1/8
.046 (1.910) 3/64
.125 (3.175) 1/8
.093 (2.381) 3/32
.031 (0.794) 1/32
.125 (3.175) 1/8
.093 (2.381) 3/32
.046 (1.910) 3/64
.010 (0.254) 1/100
.093 (2.381 3/32
.015 (0.397) 1/64
.062 (1.588) 1/16
.093 (2.381) 3/32
.062 (1.588) 1/16
.0156 (.0397) 1/64
2000-1815
2000-1925
.059 (1.498)
.046 (1.168)
.093 (2.362)
.092 (2.336)
.090 (2.286)
.076 (1.930)
.046 (1.168)
.034 (.8636)
Eyelet
Eyelet
.062 (1.588)
.062 (1.588)
1/16
1/16
* Available in Brass Only. All Dimensions are in inches + 10%
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
29
Plate-Master Gold Contact Repair SRS-069
Overview
The Plate-Master System cleans and electroplates printed circuit board connector contacts and other electronic
assemblies.
Accurate Deposition
Cleaning and plating electrolysis is
accomplished by the use of a plating
point probe. The solutions are
accurately deposited using easy-tohandle brush tipped applicators.
Electroplating Control settings are
simple to select by reference to a
predetermined chart.
Plate-Master
The Plate-Master is used most
commonly to repair Gold Finger
Contacts on circuit boards, but the
system may be used to electroplate a
variety of materials, e.g., lead, tin,
copper to nickel, aluminum, and
gold.
Cont’d
Voltage Control
The SRS-069 is a low power system
with a precision voltage source where
the output voltage controls the
activation of the plating solution. This
voltage is controlled to within three
percent by the internal regulator.
Current Control
The current control is a precision
source that determines the rate and
the amount of plating that is
deposited, ensuring a uniform plating
thickness when set, preventing the
possibility of burning or arcing. The
control setting changes the gain of
an operational amplifier, and when
proportional, prevents further current
from being applied.
Before and After
These Before and After photographs
indicate the finished result possible
using the SRS-069, combined with
the EX-680 Desolder System.
Application Examples:
Gold Plating
PC Board Edge
Connectors and other
device contacts for
excellent conductivity
without corrosion
Nickel Plating
Between base copper
and overplate of gold
to prevent copper
migration; overplating
on mild steel
Operational
Plating
Fast buildup over
0.0003 to 0.0005 in.
thick copper
Copper
High Speed
alkaline
Copper
Alkaline
Thin buildup over
aluminum or mild
steel
Tin-Lead,
Tin Plating
Directly over base
copper materials, alone
for solderable surfaces
or underplating for
tin-lead
Consumable Solutions:
6911-1321
1 oz.
6911-3321
3 oz.
6911-1336
1 oz.
Toll Free: 1-800-VAC-TOGO(822-8646) Phone:
Before
30
After
6911-3336
6911-1330
6911-3330
6911-1324
6911-3324
6911-1326
6911-3326
6911-0823
3028-3029
3 oz.
1 oz.
3 oz.
1 oz.
3 oz.
1 oz.
3 oz.
3
2
Gold
Nickel
Nickel
Copper
Copper
Copper Alkaline
Copper Alkaline
Brush Applicator
Brush Holding Screws
SRS-069 Includes:
0690-0001
0690-2001
Power supply 110V
Power Supply 220V
system only
Brush Pk/3
Handle Assembly
Rinse Bottle 1 oz.
Electroclean 1/2 oz.
Nickel Solution 1/2 oz.
Gold Solution 1/2 oz.
Manual
MSDS
6911-0823
4100-6100
6911-8799
6911-1321-A
6911-1330-A
6911-1336-A
0690-0690
0000-0000
Model
Part #
Description
SRS-069
0690-0000 Plate-Master System
60 Hz 110V
SRS-069
0690-2000 Plate-Master System
50 Hz 220V
Specifications:
Dimension
6.75" x 7.37" x 5.25"
(17.14 x 18.00 x 13.33 cm)
5.00 lb (2.27 kg)
High Gain Op Amp
DC Output
Weight
Electroclean
Current
Electroclean
Voltage
Gold
305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
BondMaster LCD Production & Repair SMD-9000
Overview
A proven bonding repair and production system for Liquid Crystal Displays, which are bonded by Heat Seal Connector
contacts (HSC) or Reflow Solder contacts, as used in Pagers, Portable Radios, PCMCIA, and PCS devices.
Automatic Control
Bonding Lock
A closed-loop system continually
compensates for “Set Point” of
temperature drop and overshoot,
which is accomplished by a centrally
located, low mass (fast response)
thermocouple sensor, located directly
within the Hot Bar.
Once the subject is in place under the
Bond Head and the pressure adjusted
by the Thumb Wheel, the Bond Head
is placed in position by a Locking
Lever, which will remain until the
bond time is completed.
VISION AWARD
Winner for the best new
product in the category
of rework and repair.
The close tolerance temperature
control eliminates thermal stress,
delamination and heat degradation,
providing a major advantage in the
reliability of the bonded components.
Bonding Head
The BondMaster uses a self-aligning,
free-floating Bond Head (Hot Bar
Thermode), which is optimized by a
Temperature Controller providing
accurate and reliable temperaturetime cycle control.
Bonding Thermal Stability
Uniform heat distribution throughout
the Hot Bar is critical in ensuring a
reliable bond.
Ingredients for a
Successful Bond:
•
•
•
•
Time
Temperature
Profile
Pressure
Time, Temperature, and Profile are
controlled by the PID Controller,
which stores the correct program for
the bond.
Bonding Surface Thermal Stability
1
High Thermal
Mass Heater
Reservoir
“Super Flat”
Non-distortion
bond ±0.0005"
2
3
4
5
Embedded Thermocouple Test
(bottom view) in Bonding Head
Test Results
Precision
Microprocessor
Controlled
Thermocouple
Pressure
Pressure is applied by a calibrated
tension, maintained by a Bearing
Carriage and determined by a Thumb
Wheel Adjuster. A Locking Pin
protects against intervention.
Precise and Repeatable Bonding
of HSC and Mylar Solder Materials
Precise and Repeatable Bond Pressures
Free-Floating, Self-Aligning Head
Coplanar Triple Chrome Plated
“Super Flat” Bonding Head
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
31
BondMaster LCD Production & Repair SMD-9000
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HSC, Mylar, PCMCIA, Flexible Circuit connections
Microprocessor controlled
Self-contained, no PC or factory air required
Linear pressure control
Precise temperature control and profiling
Repeatable process control
Continuous or pulse operation
Pre-stored profile groups
User programmable
Floating and self-aligning Bond Head
Thermal bonding reservoir
“Super Flat” bonding surface
Thermal stability throughout bonding cycle
No silicone barrier required
Process Control Programmable
Features:
•
•
•
•
Ramp rate degrees/sec
Ramp rate time vs. temp
Programmable set point Celsius or Fahrenheit
Ramp time 15 (continuous) sec to 3 minutes
BondMaster Fixturing
Applications
•
•
•
•
•
•
•
•
•
•
•
LCD Repair
Pager Repair
Hot Bar Bonding
Flex Panels
OLED displays
Reflow Soldering
Heat Staking
Hot Bar Soldering
ACF Bonding
Flex Circuits
Ribbon Cables
•
•
•
•
•
•
•
•
•
•
•
Gold Wire Bonding
Anistropic Conductive Adhesives
TFT Modules
Heat Sealing
Radio Repair
Solar Cell Production
TAB Soldering
Conductive Adhesives
HSC Bonding
Mobile Phones
Thermocompression Bonding
The BondMaster has been engineered to enable
rapid interchange of differing product assemblies,
not only for Pager products listed but also for production assembly of LCD and Flexible Circuits.
Fixturing:
We are pleased to offer advice in developing a
Fixture. However in order to keep costs to a
minimum we suggest that our customers use
either in-house or local facilities to fabricate
fixture requirements.
Order Information
APE
Part #
Motorola
Part #
Description
9000-1000
9000-1002
9000-1010
9000-2000
9000-0899
8200-1370
8200-1360
R1346A
R1347A
0180304E22
0180304E24
0180302E51
0180304E25
0180304E72
BondMaster 60Hz 110V
BondMaster 50Hz 220V
Universal Bonding Fixture
X-Y Table and Microscope
MasterLens 110V
HSC Bond Tape, 3 pack
HSC Bond Tape, 6 Pack
32
Specifications:
Electrical
Power
Mechanical
Dimension
Weight
Temperature
Pressure
Time
110V/220V, 50/60Hz
200 Watts
Aluminum Plate Construction
15" x 12" x 12" (381 x 305 x 305 mm)
14 Ibs. (6.36 Kg)
Ambient up to 550°F (288°C)
0–100 Ibs. (45.45 Kg) Adjustable
Programmable 1 sec to 3 minutes
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
Reference Data Page
Overview
This page is an important aid in developing thermal profiles for reworking components. Lead-free alloys require higher
melting temperatures. A glossary of commonly used terms is also listed.
Solder Joint Comparison
Good
Good
Inferior
Inferior
Melting Range of Common Solder Alloys
Good
Inferior
Alloy Composition
Photographs, courtesy of Soldering Technology International Inc.
Glossary of terms
Anosotropic
APC
BGA
Bumped
BQFP
CBGA
CCBGA
Column
Dummy
DIP
Eutectic
Flip Chip
JLEAD
LCC
Micro BGA
Monosotropic
Perimiter BGA
Planar
PLCC
PCMCIA
QFP
TSOP
SMT
TBGA
Flexible Circuit APC Conductive particles suspended in
adhesive material
Additive Polymer Conductive
Ball Grid Array
Solder Sphere Contacts on BGA or Flip Chip
Bumpered Quad Flat Pack (Corner Bumpers)
Ceramic Ball Grid Array
Column Ceramic Ball Grid Array
Non eutectic solder CBGA connections
Component without active circuit
Dual Inline Package
Lowest possible temperature of solidification
Die technology with bumped contacts
PLCC contact leads on edge of package in J shape
Leadless Chip Carrier
Tessera package, high pin count, low physical size
Flexible Circuit dense pitch APC
Spheres constructed around circumference of BGA for
Computer Board compatability
Term used for Flexible Circuit Soldered Connections
Plastic Leaded Chip Carrier
Personal Computer Memory Card International Association
Quad Flat Pack
Thin Small Outline Package
Surface Mount Technology
Thin Ball Grid Array
70Sn/30Pb
63Sn/37Pb
60Sn/40Pb
50Sn/50Pb
40Sn/60Pb
30Sn/70Pb
25Sn/75Pb
10Sn/90Pb
5Sn/95Pb
62Sn/36Pb/2Ag
10Sn88Pb/2Ag
5Sn/92.5Pb/2.5Ag
5Sn/90.5Pb/1.5Ag
5Sn/93.5Pb/1/5Ag
2Sn/95.5Pb/2.5Ag
1Sn/97.5Pb/1.5Ag
96.5Sn/3.5Ag
95Sn/5Sb
42Sn/58Bi
43Sn/43Pb/14Bi309
52Sn/38In
701n/30Pb
601n/40Pb
70Sn/18Pb/12In
90Pb/5n/5Ag
92.5Pb/5In/2.5Ag
97.5Pb/2.5Ag
Melting Range
Solidus
Melting Range
Liquidus
°C
183
183
183
183
183
185
183
268
308
179
268
292
287
296
299
309
221
235
138
144
118
160
174
162
290
300
303
°C
193
183
190
216
238
255
266
302
312
179
290
292
296
301
304
309
221
240
138
163
131
174
185
162
310
310
303
°F
361
361
361
361
361
365
361
514
586
355
514
558
549
564
570
588
430
455
281
291
244
320
345
324
554
572
578
°F
380
361
375
420
460
491
511
575
594
355
554
558
564
574
579
588
430
464
281
325
268
435
365
324
590
590
578
Mushy
Range
°C
10
0
7
33
55
70
83
34
4
0
22
0
9
5
5
0
0
5
0
19
13
14
1
0
20
10
0
°F
19
0
14
59
99
126
150
61
8
0
40
0
15
10
9
0
0
9
0
34
24
25
20
0
36
18
0
Order Online www.APE.com or go to:
Fahrenheit to Celsius Conversion
Fahrenheit to Celsius:
Celsius to Fahrenheit:
(°F – 32) / 1.8 = °C
(°C x 1.8) + 32 = °F
GSA Contract # GS-07F-0483U
Toll Free: 1-800-VAC-TOGO(822-8646) Phone: 305-451-4722 Fax: 305-451-3374 e-mail: [email protected]
33
Lead-Free Rework
2 North Blackwater Lane • Key Largo, FL 33037 • Tel. 305.451.4722 • Fax 305.451.3374 • Web Site: www.ape.com • E mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement