Vizio | E400-B2 | User manual | Vizio E400-B2 User manual

VIZIO
USER MANUAL
Model: E400-B2 & E480-B2
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
picture settings or enabling other features will increase
power consumption that could exceed the limits necessary
to qualify for ENERGY STAR rating.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS Studio Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.

Welcome
THANK YOU FOR CHOOSING VIZIO
IMPORTANT SAFETY INSTRUCTIONS
And congratulations on your new VIZIO HDTV.
Your TV is designed and manufactured to operate within defined
design limits. Misuse may result in electric shock or fire. To prevent
your TV from being damaged, the following instructions should
be observed for the installation, use, and maintenance of your
TV. Read the following safety instructions before operating your
TV. Keep these instructions in a safe place for future reference.
To get the most out of your new VIZIO product, read these
instructions before using your product and retain them for future
reference. Be sure to inspect the package contents to ensure
there are no missing or damaged parts.
PRODUCT REGISTRATION
To purchase or inquire about accessories and installation services
for your VIZIO product, visit our website at www.VIZIO.com or call
toll free at (877) 878-4946.
We recommend that you either:
• To reduce the risk of electric shock or component
damage, switch off the power before connecting other
components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Register your VIZIO product at www.VIZIO.com
• Follow all instructions.
• Complete and mail the enclosed registration card
• Do not use this apparatus near water.
Extended Warranties
For peace of mind, and to protect your investment beyond the
standard warranty, VIZIO offers on-site extended warranty service
plans. These plans provide additional coverage during the
standard warranty period. To purchase an extended warranty
service plan, visit www.VIZIO.com.
WHEN READING THIS MANUAL
When you see this symbol, please read the
accompanying important warning or notice. It is
intended to alert you to the presence of important
operating instructions.
When you see this symbol, please read the
accompanying helpful tip.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in
any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been
dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature
to an area of high temperature, condensation may form
in the housing. Wait before turning on your TV to avoid
causing fire, electric shock, or component damage.
source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer
or local power company.
• Do not apply pressure or throw objects at your TV.
This may compromise the integrity of the display. The
manufacturer’s warranty does not cover user abuse or
improper installations.
• The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
• When connected to a power outlet, power is always
flowing into your TV. To totally disconnect power, unplug
the power cord.
• The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
• Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
• A distance of at least three feet should be maintained
between your TV and any heat source, such as a radiator,
heater, oven, amplifier etc. Do not install your TV close to
smoke. Operating your TV close to smoke or moisture may
cause fire or electric shock.
• The wall socket should be installed near your TV and
easily accessible.
• Slots and openings in the back and bottom of the
cabinet are provided for ventilation. To ensure reliable
operation of your TV and to protect it from overheating,
be sure these openings are not blocked or covered. Do
not place your TV in a bookcase or cabinet unless proper
ventilation is provided.
• Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
• Never push any object into the slots and openings on
your TV cabinet. Do not place any objects on the top of
your TV. Doing so could short circuit parts causing a fire
or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power
• Only power of the marked voltage can be used for your
TV. Any other voltage than the specified voltage may
cause fire or electric shock.
• Unplug your TV during a lightning storm or when it will not
be used for long period of time. This will protect your TV
from damage due to power surges.
• Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.

• WARNING: Keep your TV away from moisture. Do not
expose your TV to rain or moisture. If water penetrates into
your TV, unplug the power cord and contact your dealer.
Continuous use in this case may result in fire or electric
shock.
• Do not use your TV if any abnormality occurs. If any
smoke or odor becomes apparent, unplug the power
cord and contact your dealer immediately. Do not try to
repair your TV yourself.
• Avoid using dropped or damaged appliances. If your
TV is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric
shock.
• Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
• Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
• When unplugging your TV, hold the AC/DC power
adapter, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or
electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the
connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire
or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
• CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
h
• T he lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.

TELEVISION ANTENNA CONNECTION
PROTECTION
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against
voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Ground Clamp
Lightning Protection
For added protection of the TV during a lightning storm or when
it is left unattended or unused for long periods of time, unplug
the TV from the wall outlet and disconnect the antenna or cable
system.
Power Lines
Do not locate the antenna near overhead light or power circuits,
or where it could fall into such power lines or circuits. Remember,
the screen of the coaxial cable is intended to be connected to
earth in the building installation.
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Electric Service Equipment
Power Service Grounding Electrode
System
(NEC ART 250, part H)
Table of Contents
Installing the TV................................................. 3
Resetting the Picture Settings........................................... 24
Inspecting the Package Contents...................................... 3
Adjusting the Audio Settings............................................... 25
Installing the TV.................................................................... 4
Resetting the Audio Settings............................................. 26
Installing the TV Stand...................................................... 4
Activating the Sleep Timer................................................... 26
Installing the TV on a Wall................................................. 6
Setting the Auto Power Off Feature................................... 27
Setting Up the Tuner............................................................ 27
Controls and Connections............................... 7
Selecting a Tuner Input..................................................... 28
Rear Panel........................................................................... 7
Scanning for Channels..................................................... 28
Side Panel............................................................................ 8
Adding New Channels..................................................... 28
Front Panel........................................................................... 9
Skipping Channels........................................................... 29
Remote Control................................................................... 10
Changing the Audio Language....................................... 30
Replacing the Batteries.................................................... 11
Setting Up Closed Captioning............................................ 31
Connecting Your Devices.................................. 12
Changing the Appearance of Digital Closed Captions.. 31
Connecting a Device.......................................................... 12
Setting Up Devices............................................................... 33
Connecting a Device - Audio and Video Cable Types.... 13
Changing the TV Settings.................................................... 34
Connecting an Audio Device............................................. 15
Displaying System Information......................................... 34
Connecting an Audio Device - Audio Cable Types............ 16
Using the Parental Controls.............................................. 35
Connecting an Audio Device - ARC.................................... 17
Accessing the Parental Controls Menu............................ 35
Enabling or Disabling Program Ratings............................ 35
Completing the First-Time Setup....................... 18
Locking and Unlocking Channels.................................... 35
Using the On-Screen Menu............................... 19
Blocking and Unblocking Content by Rating................... 36
Navigating the On-Screen Menu........................................ 19
Changing the Parental Control Passcode....................... 36
Changing the Input Source................................................ 20
Resetting the Content Locks............................................. 36
Changing the Screen Aspect Ratio.................................... 20
Changing the On-Screen Menu Language..................... 37
Adjusting the Picture Settings............................................. 21
Setting the Time Zone....................................................... 37
Adjusting the Picture Size and Position............................ 22
Adjusting the CEC Settings............................................... 38
Adjusting the Color Temperature..................................... 22
Turning the Power Indicator On or Off.............................. 38
Adjusting the Advanced Picture Settings......................... 23
Using the Reset & Admin Menu........................................... 39
Resetting the Color Temperature Settings........................ 23
Resetting the TV Settings................................................... 39
1

Restoring the TV to Factory Default Settings..................... 40
Using the Guided Setup Menu......................................... 40
Using Guided Setup.......................................................... 40
Using the Info Window......................................................... 41
Using the USB Media Player.............................. 42
Using the USB Media Player................................................. 42
Preparing Your USB Drive to Play USB Media..................... 42
Playing USB Media............................................................ 42
Removing the USB Drive from the TV................................. 42
Troubleshooting & Technical Support............... 44
Specifications.................................................... 47
Limited Warranty................................................ 49
Legal & Compliance......................................... 50
2
1
Installing the TV
INSPECTING THE PACKAGE CONTENTS
Before installing your new TV, take a moment to inspect the
package contents. Use the images below to ensure nothing is
missing or damaged.
VIZIO LED HDTV with Stand
Remote Control
with Batteries
Quick Start Guide
Power Cord
7 x M4 14mm
Phillips Screws
(For E400-B2)
7 x M4 10mm
Phillips Screws
(For E480-B2)
PACKAGE CONTENTS
3
1
INSTALLING THE TV
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed
in two ways:
• On a flat surface, using the included stand
• On a wall, using a VESA-standard wall mount (not
included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the
TV and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly
secured
It is recommended that two people take part in the base
installation.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft surface
such as a blanket.
TV ON STAND
4
1
To install the base:
For E400-B2
For E480-B2
1. Align the neck with the base and snap it into place.
1. Align the neck with the base and snap it into place.
2. Using a Phillips screwdriver, insert three (3) M4 x 14mm
screws into the holes on the bottom of the base and tighten
them to secure it to the neck.
2. Using a Phillips screwdriver, insert three (3) M4 x 10mm
screws into the holes on the bottom of the base and tighten
them to secure it to the neck.
3. Align the neck piece with the slot in the bottom of the TV
and slide it into place as shown.
3. Align the neck piece with the slot in the bottom of the TV
and slide it into place as shown.
4. Using a Phillips screwdriver, insert four (4) M4 x 14mm screws
into the holes on the back of the TV and tighten them to
secure the neck to the TV.
4. Using a Phillips screwdriver, insert four (4) M4 x 10mm screws
into the holes on the back of the TV and tighten them to
secure the neck to the TV.
5. When you are finished, place the TV on a stable,
level surface at least eight (8) inches from the floor.
5. When you are finished, place the TV on a stable,
level surface at least four (4) inches from the floor.
5
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
E400-B2
E480-B2
Screw Size:
M4
M6
Screw Pitch:
0.7mm
1.0mm
Hole Pattern:
100mm (V) x 100mm (H)
200mm (V) x 200mm (H)
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
WALL MOUNT SCREW LOCATION - E400-B2
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV. See Appendix B - Specifications on
page 47 for the weight of this TV.
WALL MOUNT SCREW LOCATION - E480-B2
6
2
Controls and Connections
USB - Connect a USB thumb drive to view photos.
HDMI - Connect an HDMI device.
Optical Audio Out - Connect an optical/SPDIF audio device, such as
home audio receiver.
Stereo Audio Out - Connect an RCA audio device, such as sound bar.
HDMI - Connect an HDMI device.
Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Component/Composite - Connect a component or composite device.
REAR PANEL
7
2
POWER - Press and hold to turn TV off or on.
INPUT - Press to change the input source.
SIDE PANEL
8
2
FRONT PANEL
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.
To keep the power indicator on as long as the TV is on, see “Turning the Power Indicator
On or Off” on page 38.
9
FRONT PANEL
2
REMOTE CONTROL
INPUT
Change the currently-displayed input.
POWER
Turn the TV on or off.
A/V CONTROLS
Control USB media player.
INFO
Display the info window.
CLOSED CAPTIONS
Open the closed caption menu.
MENU
Display the on-screen menu.
EXIT
Close the on-screen menu.
ARROW
Navigate the on-screen menu.
OK
Select the highlighted menu option.
GUIDE
Display the info window.
BACK
Go to the previous on-screen menu.
V BUTTON
Open the USB media player.
VOLUME UP/DOWN
Increase or decrease loudness of
the audio.
CHANNEL UP/DOWN
Change the channel.
LAST
Return to the channel last viewed.
MUTE
Turn the audio off or on.
DASH
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
NUMBER PAD
Manually enter a channel.
WIDE
Switch the display mode.
REMOTE CONTROL
10
2
Replacing the Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and
(-) symbols inside the battery compartment.
3. Replace the battery cover.
11
3
Connecting Your Devices
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc.).
Cable/Satellite Box
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on. Set the TV’s input to match
the connection you used (HDMI-1, HDMI-2, etc.).
DVD/Blu-ray Player
HDMI CABLE
BEST
Game Console
• DIGITAL
• HD VIDEO (1080p)*
• HD AUDIO
COMPONENT CABLE
BETTER
COAXIAL CABLE
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
BETTER
• ANALOG
• HD VIDEO (1080i)*
• STEREO AUDIO
AV CABLE
• ANALOG
• VIDEO (480i)*
• STEREO AUDIO
GOOD
BACK OF TV
12
* Maximum Resolution
3
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
AV cables (or Composite cables) are the traditional
way of connecting your devices to your TV. Video
signals are sent over the yellow connector while audio
is sent over the red and white connectors.
Coaxial cables are the traditional way of connectiong
antennas and cable television signals to your TV.
Coaxial cables carry both audio and video signals
through a single connector.
• Video Resolutions up to 480i
• HD Video Resolutions up to 1080i
• Analog Connection
• Analog Connection
• Audio and Video Signals
• Audio and Video Signals
Y
L
R
COMPONENT VIDEO
GOOD
BETTER
13
3
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry high
definition video signals along with additional
audio connections. Colors are delivered with color
information split up three different ways over three
connectors for video (separated into Red, Blue and
Green signals) and the left and right audio connectors
(Red and White).
HDMI is the intelligent, all-digital interface that delivers
both dazzling quality and unmatched ease of use.HDMI
technology transmits crystal-clear digital video along
with multi-channel surround audio. HDMI-connected
devices have the ability to automatically adjust
themselves for optimal viewing.
• HD Video Resolutions up to 1080i
• HD Video Resolutions up to 1080p
• Analog Connection
• HD Audio
• Audio and Video Signals
• Digital Connection
• Audio and Video Signals
COMPONENT VIDEO
R
L
Pr/Cr
Pb/Cb
Y
HDMI
HDMI
BETTER
BEST
14
3
CONNECTING AN AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver
or sound bar.
1. Verify that your device has an audio port that matches an
available port on the TV (HDMI or RCA).
Home Audio Receiver
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and
the device.
4. Turn the TV and your device on.
VIZIO Sound Bar
HDMI CABLE
BEST
• ARC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
OPTICAL/SPDIF CABLE
BETTER
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
RCA CABLE
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
GOOD
BACK OF TV
15
3
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
OPTICAL/SPDIF CABLE
HDMI CABLE
AV cables (or Composite cables) are the
traditional way of connecting your devices to
your audio device. Audio signals are sent over
the red and white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI technology transmits crystal-clear digital
multi-channel surround audio through a single
HDMI cable. Audio Return Channel-enabled
(ARC) TVs allow audio to be sent over an already
connected HDMI cable, eliminating the need
for a separate audio cable. See Connecting an
Audio Device - ARC on page 17.
• Quality Stereo Connection
• PCM Stream (Lossless)
• 2.0 Channel
• Dolby Digital 5.1 Channel
• Analog Connection
• DTS 5.1 Channel
• Audio Signal Only
• Digital Connection
COMPONENT VIDEO
• Audio Signal Only
L
R
GOOD
Optical/SPDIF
• ARC 2-way Communication
(Auto setup)
• PCM, DTS, Dolby Digital
• 2.0-5.1 Scaleable Lossless
Digital Audio Connection
• Audio and Video Signals
HDMI
DIGITAL OPTICAL AUDIO
HDMI
BETTER
BEST
16
3
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
Built-in Tuner
Built-in Tuner
Your TV
Without an HDMI ARC setup,
your TV will transmit audio
signals from the built-in
tuner to your home audio
receiver through a separate
audio connection.
RCA (Audio)
Your TV
HDMI
HDMI
Your Home Audio Receiver
Your Home Audio Receiver
HDMI
HDMI
Your Blu-ray Player
Your Blu-ray Player
17
With an HDMI ARC setup, the
audio connection between
your TV and home audio
receiver can be removed.
The HDMI cable will transmit
audio signals to and from
your TV with an all-digital
audio/video connection.
4
Completing the First-Time Setup
The first time you turn on the TV, the Setup app will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
4. Use the OK and Arrow Up/
Down buttons on the remote to
highlight your time zone and
press OK.
5. Use the OK and Arrow Up/
Down Buttons on the remote
to set whether daylight saving
time applies in your locale.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
When you are finished,
highlight Next and press OK.
6. Use the Arrow buttons on the
remote to highlight how your TV
is receiving signal and press OK.
2. Press the Right Arrow button on
the remote to highlight Home
Use, and then press OK.
Follow the on-screen
instructions to complete the
channel scan.
7. When you have finished the channel scan, highlight Exit to
Live TV and press OK.
3. Use the OK and Arrow
Up/Down buttons on the
remote to select your
language and country.
The First-Time Setup is complete.
18
5
Using the On-Screen Menu
NAVIGATING THE ON-SCREEN MENU
Your TV features an easy-to-use on-screen menu.
To open the on-screen menu, press the MENU button on the
remote.
From this menu, you can:
• Adjust the Picture settings
TV SETTINGS
• Activate the Sleep Timer
Picture
• Adjust the Tuner settings
Audio
• Adjust TV Settings
• Access the Guided Setup
Wide
Zoom
Normal
Exit
2D
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
Timers
• Set up Closed Captioning
• Name the TV Inputs
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
VIZIO
• Adjust the Audio settings
To open the on-screen menu, press
the MENU button on the remote.
Tuner
CC
Closed Captions
Devices
System
Guided Setup
19
While navigating the on-screen menu, you can press
3D
the BACK button at any time to return to the previous
menu screen. The EXIT button will close the
ABC
on-screen
menu.
5
CHANGING THE INPUT SOURCE
CHANGING THE SCREEN ASPECT RATIO
External devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your TV. To use one of
these devices with your TV, you must first change the input
source in the on-screen menu.
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the screen aspect ratio:
To change the input device:
1. Press the INPUT button on
the remote. The input menu is
displayed.
2. Use the Up/Down Arrow
buttons or the INPUT button
on the remote to highlight the
input you wish to view and
press OK. The selected input is
displayed.
1. Press the WIDE button on the
remote.
TV
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
COMP
• Normal preserves the content’s
original aspect ratio. Since the
4:3 aspect ratio is not large
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
HDMI-1
HDMI-2
Note: Inputs may vary by TV.
Normal
Normal
Panoramic
Stretch
Wide
Wide
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
• Stretch expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 720p/1080i source.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 480i/480p source.
• Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the
display image may appear distorted. If the program
is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and
bottom of the display image.
• Zoom expands images with black bars to fit the screen.
20
5
ADJUSTING THE PICTURE SETTINGS
Your TV display can be adjusted to suit your preferences and
viewing conditions.
To adjust the picture settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Picture and
press OK. The PICTURE menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
• Standard mode sets the
various picture settings to
values that meet
ENERGY STAR® requirements.
• Calibrated mode sets the
picture settings to values
perfect for watching TV in a
brightly-lit room.
• Auto Brightness Control - The auto brightness control
detects the light levels in the room and automatically
adjusts the backlight for the best picture. Select Off, Low,
Wide
Zoom
Normal
Panoramic
Medium,
or High.
VIZIO
PICTURE
Picture Mode
Standard
Auto Brightness Control
Backlight
Brightness
Contrast
Color
Tint
Sharpness
-
Medium
+
50
+
50
+
50
+
50
+
0
+
0
4. To manually change each of the picture settings, use the
Up/Down Arrow buttons on the remote to highlight that
picture setting, then use the Left/Right Arrow buttons to
adjust the setting:
• Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted
when starting from some picture modes.
Exit
2D
Input
Wide
3D
• Brightness - Adjusts the black level of the picture. When
this setting is too low, the picture may be too dark to
ABC
distinguish details. When this setting is too high, the
picture may appear faded or washed out.
Advanced
CC
• Contrast - Adjusts the white level of the picture. When
this setting is too low, the picture may appear dark. When
this setting is too high, the picture may appear faded
Sleep or washed out. If the setting is too high or too low, detail
Picture
Audio
Timer
may be difficult to distinguish in dark or bright areas of
the picture.
Select from preset picture modes. Standard
picture mode meets ENERGY STAR®
requirements. For the best picture, use
Calibrated mode. To reduce video delay
(lag) when gaming, use Game mode.
• Color - Adjusts the intensity of the picture colors.
Settings
Help the hue of the picture. This setting is useful
• Tint
- Adjusts
in adjusting the flesh tones in the picture. If flesh appears
too orange, reduce the level of color before adjusting tint.
Network
• Calibrated Dark mode sets the picture settings to values
perfect for watching TV in a dark room.
• Sharpness - Adjusts the edge sharpness of picture
elements. It can be used to sharpen non-HD (high
definition) content; however, it will not produce detail that
does not otherwise exist.
• Vivid mode sets the picture settings to values that
produce a brighter, more vivid picture.
• Game mode reduces throughput delays and optimizes
the picture settings for displaying game console output.
5. When you have finished adjusting the picture settings, press
the EXIT button on the remote.
• Computer mode optimizes the picture settings for
displaying computer output.
21
5
Adjusting the Picture Size and Position
When displaying an image, the size and position of the display
image can be adjusted. The size and position adjustments
depend on signal source.
To adjust the picture size and position:
1. From the PICTURE menu, use
the Arrow buttons on the
remote to highlight Advanced,
then press OK.
2. Use the Arrow buttons on the
remote to highlight Size &
Position, then press OK. The SIZE
& POSITION menu is displayed.
SIZE & POSITION
Vertical Position
Horizontal Size
Vertical Size
-
+
32
+
16
+
0
+
0
To adjust the color temperature:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Advanced, then press OK.
2.Wide
Use the
buttons
on
ZoomArrow
Normal
Panoramic
the remote to highlight Color
Temperature, then press OK.
The COLOR TEMPERATURE menu
is displayed.
Exit
2D
3. Use the
Arrow3Dbuttons on
the remote to highlight Color
Temperature,ABC
then use the
Left/Right Arrow buttons to
change the color temperature
Input
CC
preset:Wide
• Cool produces a blue-hued
picture.
• Computer optimizes the
Sleep picture for use as a PC
Picture
Audio
Timer
monitor.
• Normal is optimized for
television viewing.
• Custom
you to
Network
Settings allows
Help
manually change each
of the color temperature
settings:
VIZIO
Horiz. Position
Adjusting the Color Temperature
Adjusting the color temperature will change the “warmness” or
“coolness” of the white areas of the picture.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• Horiz. Position - Adjusts
the horizontal (left/right)
position of the display
image.
• Vertical Position - Adjusts
the vertical (up/down)
position of the display
image.
VIZIO
COLOR TEMPERATURE
Color Temperature
Red Gain
Green Gain
Blue Gain
Red Offset
Green Offset
Blue Offset
-
Normal
+
128
+
128
+
128
+
128
+
128
+
128
Reset Color Temperature
Red/Green/Blue Gain - Adjusts the amount of each
color in the display.
• Horizontal Size - Adjusts the width of the display image.
Red/Green/Blue Offset - Adjusts the position of each
color in the display.
• Vertical Size - Adjusts the height of the display image.
4. When you have finished adjusting the size and position,
press the EXIT button on the remote.
4. When you have finished adjusting the color temperature,
press the EXIT button on the remote.
22
5
Resetting the Color Temperature Settings
Adjusting the Advanced Picture Settings
To reset the Color Temperature settings:
To adjust the advanced picture settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Advanced, and then press OK.
1. From the PICTURE menu, use the
Arrow buttons on the remote to
highlight Advanced, then press OK.
2. Use the Arrow buttons to highlight Color Temperature, and
then press OK. The COLOR TEMPERATURE menu is displayed.
3. Use the Arrow buttons to highlight Reset Color Temperature,
then press OK. The TV displays, “Select Reset to restore factory
default color temperature settings.”
4. Highlight Reset and press OK.
2. Use the Arrow buttons on the
remote to highlight Advanced
Picture, then press OK. The
ADVANCED PICTURE menu is
displayed.
VIZIO
ADVANCED PICTURE
Black Detail
Medium
Backlight Control
On
Reduce Signal Noise
Low
Reduce Block Noise
Low
Film Mode
Auto
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
5. Press the EXIT button on the remote.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Backlight Control - Dynamically improves the contrast
ratio of the picture by adjusting the backlight. The
adjustment is controlled by the content on the screen.
Select On or Off.
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
for mpeg files. Select Off, Low, Medium, or High.
• Film Mode - Optimizes the picture for watching film.
Select Auto or Off.
4. When you have finished adjusting the Advanced Picture
Settings, press the EXIT button on the remote.
23
5
Resetting the Picture Settings
To reset the picture settings to the factory default settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Advanced, then press OK.
2. Use the Arrow buttons on the remote to highlight Reset
Picture Mode, then press OK. The TV displays, “Select Reset to
restore factory default picture settings.”.
3. Highlight Reset and press OK.
4. Press the EXIT button on the remote.
24
5
ADJUSTING THE AUDIO SETTINGS
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
To adjust the audio settings:
• Digital Audio Out - Changes the type of processing for
the Optical and HDMI ARC output when connected to a
home theater audio system. Select PCM or Bitstream.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
VIZIO
• Analog Audio Out - Sets the volume control properties
Normal
Panoramic
forZoom
the analog
RCA (red/white) connectors when
connected to a home theater audio system. Select
Variable to control the external speakers’ volume from
the TV’s volume controls, or select Fixed to control the
Exit
2D
3D
external
speakers’
volume from your home theater system
controls.
AUDIO
TV Speakers
On
Surround Sound
On
Volume Leveling
Balance
Lip Sync
Wide
On
-
+
+
Digital Audio Out
PCM
Analog Audio Out
Fixed
ABC
• Equalizer Settings
- Adjusts the boost or attenuation
of different frequencies. Change the audio mode by
Flat,
Dynamic, Center, Bass Boost, or Bright.
Input selecting
Wide
CC
Equalizer Settings
Reset Audio Mode
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See Resetting the Audio Settings on
page 26.
• TV Speakers - Turns the
built-in speakers On or Off.
Sleep
Timer
Picture
Audio
Network
Settings
Help
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
• Surround Sound - DTS Studio Sound™ is a feature-rich
surround sound solution which delivers an immersive
surround sound experience from the TV’s internal
speakers. Additionally, Studio Sound completes the
entertainment experience by maintaining a steady
volume while watching programming and movies,
providing deep, rich bass, and delivering crisp details
and clear, intelligible dialog. Select On or Off.
• Volume Leveling - DTS TruVolume™ maintains consistent
volume levels during transitions between program
content, AV formats and input sources. Select On or Off.
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
25
5
ACTIVATING THE SLEEP TIMER
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
To use the sleep timer:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
3. Use the Arrow buttons to highlight Reset Audio Mode and
press OK. The TV displays, “Select Reset to restore factory
default audio settings.”
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK. The TIMERS menu is
displayed.
4. Highlight Reset and press OK.
5. Press the EXIT button on the remote.
3. Use the Arrow buttons on the
remote to highlight Sleep Timer.
4. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time
after which you want the TV to
go to sleep: 30, 60, 90, 120, or
180 minutes. If you don’t want
the sleep timer to activate,
change the setting to Off.
5. When you have finished setting
the sleep timer, press the EXIT
button on the remote.
26
VIZIO
TIMERS
Sleep Timer
Auto Power Off
Off
10 minutes
5
Setting the Auto Power Off Feature
SETTING UP THE TUNER
To help save energy, your TV is set by default to turn off after 10
minutes if no signal is being displayed on the screen. This feature
can be deactivated.
You can use the TV’s Tuner menu to:
• Select a Tuner Input
• Perform an Auto Channel Scan
To set the Auto Power Off feature:
1. From the TIMER menu, use the Up/Down Arrow buttons on
the remote to highlight Auto Power Off.
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn off
when there is no signal, change the setting to Off. Otherwise,
select 10 minutes.
3. When you have finished setting the auto power off time,
press the EXIT button on the remote.
27
VIZIO
TUNER
• Perform a Partial Channel Scan
Tuner Mode
• Manually Add Channels
Auto Channel Scan
• Select channels to skip
Partial Channel Search
• Select Analog MTS modes
• Select Digital Languages
Antenna
Add Analog Channel
Skip Channel
Analog Audio
Digital Language
Stereo
English
5
Selecting a Tuner Input
Adding New Channels
Select the type of tuner input you will be using.You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
Channel Search and Add Analog Channel options.
1. From the TUNER menu, highlight Tuner Mode and press OK.
The TUNER MODE menu displays.
To add a range of new channels:
2. Highlight Antenna or Cable and press OK. Press EXIT.
1. From the TUNER menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
Scanning for Channels
Before the TV can detect and display channels and their
associated information, you must scan for channels. A channel
scan may also be necessary when the TV has been moved to an
area where different free-to-air broadcast television channels are
available.
To perform an Auto Channel Scan:
1. From the TUNER menu, highlight
Auto Channel Scan, and press
OK. The CHANNEL SCAN begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
2. Highlight Scan Mode and select the type of channel you
are adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel where
you want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
channel.)
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace.
Use the Number Pad on the remote to enter the channel.)
VIZIO
CHANNEL SCAN
Wide
Channel Scan
Zoom
Normal
Panoramic
5. Highlight Start and press OK. The partial channel search
begins.
Digital Channels: 0
Analog Channels: 0
13% Complete
6. Exit
Wait until
the 3D
partial channel search is 100% complete.
2D
Highlight Done and press OK.
Cancel
7. Press the EXITABC
button on the remote.
If the channel scan is cancelled,the
channels
that
were
already
discovered are retained. A new
channel scan will clear all channels.
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Cancel the channel scan.
28
5
Skipping Channels
To add a single new analog channel:
1. From the TUNER menu, highlight
Add Analog Channel and
press OK. The ADD ANALOG
CHANNEL menu is displayed.
After a channel scan is completed, you may find that some
channels are too weak to watch comfortably. There may also be
some channels you do not want to view. You can remove these
Wide
Zoom
channels
from Normal
the TV’sPanoramic
memory with the Skip Channel feature.
VIZIO
ADD ANALOG CHANNEL
Enter Channel #
Add Channel
2. Highlight Enter Channel # and
use the Number Pad on the
remote to enter the number of
the channel you are adding.
Exit
3. Highlight Add Channel and
press OK. The TV scans for the
channel.
Input
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
2D entered
3D using the Number Pad. If you wish to
is
completely block a channel from being viewed, use
the parental
controls. See Locking and Unlocking
ABC
Channels on page 35.
Wide
CC
To remove a channel:
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
1. From the TUNER menu, highlight
Skip Channel, and press OK.
Sleep
Picture
Audio
Timer
The SKIP CHANNEL menu is
displayed.
2. For each channel you wish
Network
Settings use
Help
to remove,
the Up/Down
Arrow buttons on the remote
to highlight the channel and
press OK. A P appears to the
right of each channel you
select.
3. When you have selected all
of the channels you wish to
remove, press the EXIT button
on the remote.
29
VIZIO
SKIP CHANNEL
1
Test 0
1
Test 1
P
1-2
Test 2
P
2
Test 3
2-2
Test 4
2-3
Test 5
P
5
Changing the Audio Language
Some digital free-to-air, cable, and satellite channels broadcast
programs in more than one language. The Analog Audio and
Digital Language features allow you to listen to audio from
Secondary Audio Programming (SAP). SAP allows you to listen to
broadcasts in multiple languages.
• Analog Audio works with analog channels.
To use the Digital Language feature:
1. From the TUNER menu, highlight
Digital Language and press
OK. The DIGITAL LANGUAGE
menu is displayed.
2. Select your preferred language:
English, Español, or Français.
Press OK.
• Digital Language works with digital channels.
Not all programs are broadcast in multiple languages.
The Analog Audio and Digital Language features
only works when the program being viewed is being
broadcast in the language you select.
3. Press the EXIT button on the
remote.
To use the Analog Audio feature:
1. From the TUNER menu, highlight
Analog Audio and press OK.
The ANALOG AUDIO menu is
displayed.
2. Select Stereo, SAP (secondary
audio programming), or Mono.
Press OK.
VIZIO
ANALOG AUDIO
Stereo
Wide
Zoom
Normal
Exit
2D
3D
SAP
Mono
3. Press the EXIT button on the
remote.
ABC
30
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
Panoramic
VIZIO
DIGITAL LANGUAGE
English
Español
Français
5
SETTING UP CLOSED CAPTIONING
Changing the Appearance of Digital Closed Captions
Your TV can display closed captions for programs that include
them. Closed captions display a transcription of a program’s
dialogue.
Digital closed captions can be displayed according to your
preference. See the diagram on the next page for an explanation
of the parts of the closed caption area.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
The Closed Captioning menu only appears when the input is an
antenna for Over-the-Air signals, cable TV directly from the wall
(no cable box), or a device with a composite video connection.
To activate or deactivate closed
captions:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSED CAPTIONS menu is
displayed.
CLOSED CAPTIONS
Off
Analog Closed Captions
CC1
Digital Closed Captions
CS1
2. Use the Left/Right Arrow
buttons on the remote to select
Custom. The DIGITAL CLOSED
CAPTIONS STYLE menu appears
as shown.
3. Use the Up/Down Arrow
buttons on the remote to
highlight
setting
you wish
Wide
Zoom the
Normal
Panoramic
to change, then use the Left/
Right Arrow buttons to change
the setting:
VIZIO
Captions
1. From the CLOSED CAPTIONS
menu, use the Arrow buttons
to highlight Digital Closed
Captions Style and press OK.
Digital Closed Captions Style
VIZIO
DIGITAL CLOSED CAPTIONS STYLE
Caption Style
Custom
Text Style
As Broadcast
Text Size
As Broadcast
Text Color
As Broadcast
Text Opacity
As Broadcast
Text Edges
As Broadcast
Text Edges Color
As Broadcast
Background Color
As Broadcast
Background Opacity
As Broadcast
Window Color
As Broadcast
Window Opacity
As Broadcast
2D
3D
• Caption
Style
- Choose As Broadcast to keep default
settings or Custom to manually change each setting.
Exit
3. Use the Up/Down Arrow
buttons on the remote to
highlight Captions, then use
the Left/Right Arrow buttons to
select On or Off.
• Text Style ABC
- Change the font used for the closed
captioning text.
CC
• TextWide
Size - Make
the text larger or smaller.
Input
• Text Color - Change the color of the text.
4. Use the Arrow buttons on the remote to highlight the type of
closed captions you wish to see:
• Analog Closed Captions for analog (NTSC) TV channels.
• Digital Closed Captions for digital (ATSC) TV channels.
Sleep
Timer
5. After highlighting the type of closed captions you wish to
see, use the Left/Right Arrow buttons on the remote to select
the caption channel you wish to display, then press EXIT.
Network
31
• Text Opacity - Change the transparency of the text.
Picture
Audio
• Text
Edges
- Change the effects at the edges of the text,
such as raising the edges or adding drop shadows.
• Text Edges Color - Change the color of the text edge
effects.
Settings
Help
• Background Color - Change the color of the
background directly behind the text.
5
• Background Opacity - Change the transparency of the
background directly behind the text.
Typical choices include:
• Transparent background, opaque window—The entire
window remains filled with color, while the text appears in
it. The area covered by the window stays the same until
the signal from the TV or a device moves it out of the way
of a changing picture.
• Window Color - Change the color of the closed
captioning box.
• Window Opacity - Change the opacity of the closed
captioning box
• Opaque background, transparent window—Only a strip
of background appears behind the text. There is no
window to block the picture.
4. When you are satisfied with the appearance of the closed
captions, press the EXIT button on the remote.
In the example below, the closed caption text is green, the
background is black, and the window is red.
Background (BG)
Text
Closed caption text sample
Window
CLOSED CAPTIONS SCREEN LAYOUT
32
5
SETTING UP DEVICES
To make it easier to recognize the different devices attached to
the inputs on your TV, you can rename the inputs. For example, if
you have a DVD player connected to the Component input, you
can rename that input to display “DVD Player”.
To change the name of an input:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Up/Down Arrow
buttons on the remote to
highlight Devices and press
OK. The DEVICES menu is
displayed.
If you would like to name
the input yourself, highlight
the field below Input Labels.
Wide
Normal
Panoramic
EnterZoom
your custom
label using
the on-screen keyboard and
highlight OK and press OK.
VIZIO
DEVICES
HDMI-1
4. If you would like to use a preset
input label, highlight Input
Labels and press OK. Highlight
the input label you want to use
and press OK.
Blu-ray
HDMI-2
COMP
5. When you have finished
Exit
2D
naming
your 3D
input, press the
EXIT button on the remote.
ABC
3. Use the Up/Down Arrow
buttons on the remote to
highlight the Input you wish to
name and press OK. The NAME
INPUT menu is displayed.
33
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
VIZIO
NAME INPUT
Input Labels
HDMI-1
Blu-ray_
a b
j k
s t
1 2
.@#
c d
l m
u v
3 4
.com
e
n
w
5
f g
o p
x y
6 7
Space
h
q
z
8
i
r
0
9
OK
Cancel
Select the input name from a list
of common device names (Blu-ray,
Cable Box, DVD, etc).
5
CHANGING THE TV SETTINGS
Displaying System Information
To display a summary of the TV settings:
Using the system menu, you can:
• View the System Information
• Set up Parental Controls
• Change the on-screen
menu language
VIZIO
SYSTEM
2. Use the Arrow buttons on the remote to highlight System
Wide
Zoom
Normal
Panoramic
and press OK. The SYSTEM menu is displayed.
System Information
Menu Language
• Set the time zone and local
settings
Time and Local Settings
• Adjust the CEC settings
CEC
• Adjust the Power Indicator
settings
1. Press the MENU button on the remote. The on-screen menu is
displayed.
English
3. Highlight System Information and press OK.
Parental Controls
Power Indicator
4. Exit
Use the
Arrow buttons to scroll through the system
2D Up/Down
3D
information.
Off
Reset & Admin
5. When you areABC
finished reviewing the system information,
press the EXIT button on the remote.
• Reset TV Settings & Set up
Admin Controls
34
Input
Wide
CC
Sleep
Timer
Picture
Audio
Network
Settings
Help
5
Using the Parental Controls
Enabling or Disabling Program Ratings
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
Accessing the Parental Controls Menu
To enable or disable the Program Rating feature:
To access the Parental Controls menu:
1. From the PARENTAL CONTROLS menu, highlight Locks and
press OK. The LOCKS menu is displayed.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
2. Select On or Off and press OK.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking
a channel is a good way to prevent children from viewing
inappropriate material.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
4. Enter your parental passcode. If you have not set a
passcode, enter the default, 0000. The PARENTAL CONTROLS
menu is displayed.
To lock or unlock a channel:
1. From the PARENTAL CONTROLS menu, highlight Channel
Locks and press OK. The CHANNEL LOCKS menu is displayed.
To set a custom parental passcode, see Changing
the Parental Control Passcode on page 36.
2. Highlight the channel you want to lock or unlock and press
OK.
3. When a channel is locked, the Lock icon appears locked.
The channel is not accessible unless the parental passcode
is entered.
4. When a channel is unlocked, the Lock icon appears
unlocked. The channel is accessible.
35
5
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant
for children, and at other times broadcast programs that are
meant for mature audiences. You may not want to block the
channel completely using a channel lock, but you may wish to
block certain programs from being viewed.
When this is the case, you can use the TV’s Rating Block feature
For a listbased
of content
to block content
on itsratings
rating.and their definitions, visit
www.tvguidelines.org.
To block or unblock content by its rating:
Changing the Parental Control Passcode
If you use the parental controls, you should change the passcode
to prevent children from accessing inappropriate material.
To change the parental control passcode:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
and press OK. The CHANGE PIN menu is displayed.
2. In the New PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control passcode.
3. In the Confirm PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control passcode.
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
USA TV - USA television program broadcasts.
4. Write down your new parental control passcode and save it
in a secure location.
USA MOVIE - USA movie broadcasts.
5. Press the EXIT button on the remote.
CAN-ENGLISH - Canadian English television program
broadcasts.
Resetting the Content Locks
CAN-FRENCH - Canadian French television program
broadcasts.
1. From the PARENTAL CONTROLS menu, highlight RESET LOCKS
and press OK. The TV displays, “Are you sure you want to
RESET ALL LOCKS SETTINGS to the factory defaults?”
To reset the content locks to the factory-default settings:
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
2. Highlight Yes and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating and all higher ratings
cannot be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can
be viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
36
5
Changing the On-Screen Menu Language
Setting the Time Zone
Your TV can display the on-screen menu in different languages.
To ensure the correct time is displayed when you press the GUIDE
button, set the TV’s time zone:
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
VIZIO
MENU LANGUAGE
ZoomArrow
Normal
Panoramic
2.Wide
Use the
buttons
on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
English
Español
Français
2D
3. Exit
Use the
Arrow3Dbuttons on the
remote to highlight Time and
Local SettingsABC
and press OK.
The TIME AND LOCAL SETTINGS
menu Wide
is displayed.
Input
CC
3. Use the Arrow buttons on the
remote to highlight Menu
Language and press OK. The
MENU LANGUAGE menu is
displayed.
4. Highlight Time Zone and press
OK. The TIME ZONE menu is
displayed.
4. Highlight your preferred
language (English, Español, or
Français) and press OK.
Sleep
Picture
Audio
5. Timer
Highlight your time zone and
press OK.
5. Press the EXIT button on the
remote.
6. Highlight Daylight Saving and
press Settings
OK. The Help
DAYLIGHT SAVING
Network
menu is displayed. Choose On
if your locale observes daylight
savings time, or Off if it does
not.
7. Press the EXIT button on the remote.
37
VIZIO
TIME ZONE
Alaska
Hawaii
Pacific
Mountain
Central
Eastern
Atlantic
Newfoundland
Indiana
Arizona
5
Adjusting the CEC Settings
Turning the Power Indicator On or Off
The CEC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
The Power Indicator on the front of your TV normally does not
glow when the TV is on. You can change this setting if you prefer
the light to be on.
To turn the Power Indicator Light on or off:
Not all HDMI devices support CEC. See your device’s
user manual for details.
1. Press the MENU button on the remote. The on-screen menu is
displayed.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC Function - To use CEC, you must select On.
• System Audio Control - When system audio control is on,
you can control your device’s audio using the TV’s remote
control.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the EXIT button on the remote.
38
5
USING THE RESET & ADMIN MENU
Resetting the TV Settings
To reset the TV’s picture and audio settings:
You can use the TV’s Reset & Admin menu to:
• Reset the TV settings
• Restore the TV to its factory
default settings
• Start the Store Demo
1. Press the MENU button on the remote. The on-screen menu is
displayed.
VIZIO
2. Use the Arrow buttons on the remote to highlight System
Wide
Zoom
Normal
and press
OK.
The Panoramic
SYSTEM menu is displayed.
RESET & ADMIN
Reset TV Settings
Reset TV to Factory Defaults
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
Store Demo
Exit
2D
3D
4. Highlight Reset TV Settings and press OK. The TV displays,
“Select Reset to restore video and audio settings to the
ABC
factory defaults.”
5. Input
Highlight
Reset
and press OK.
Wide
CC
6. Press the EXIT button on the remote.
39
Sleep
Timer
Picture
Audio
Network
Settings
Help
Resetting the TV settings will reset Audio and Video
settings only.
5
Restoring the TV to Factory Default Settings
USING THE GUIDED SETUP MENU
All of the on-screen menu settings can be reset to the factory
defaults.
Using Guided Setup
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
The TV’s Setup App can be used to easily set up the TV tuner.
To use guided setup:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
To restore the TV to its factory default settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
2. Highlight Guided Setup and
press OK. The GUIDED SETUP
menu is displayed.
3. Highlight the guided setup you
want to use and press OK:
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
• Tuner Setup - Set up the TV
tuner.
4. Highlight Reset TV to Factory Defaults and press OK.
4. Follow the on-screen
instructions. When finished,
press the EXIT button on the
remote.
5. Enter your parental control passcode. If you have not yet set
up a parental passcode, enter the default, 0000.
The TV displays, “Select Reset to restore all TV settings to
factory defaults.”.
6. Highlight Reset and press OK.
7. Wait for the TV to turn off. The TV will turn back on shortly
afterward and the Setup App will begin.
40
VIZIO
GUIDED SETUP
Tuner Setup
5
USING THE INFO WINDOW
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
• Press the INFO or GUIDE button one time to display
channel, input, and display information.
• Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the
start and end times of the program.
Channel/Input Information
28-1
KCET-HD
1080p Oliver’s Holiday Surprise
6:15pm
TV-PG (V)
Normal
11:00AM - 12:00PM
Dolby Digital Stereo
Oliver wakes up one morning only to discover that his pals are missing. In this hourlong holiday special, Oliver goes on a journey in search of his pals. Who knows what
he’ll encounter on the way?
Program Title
Program Description
DIGITAL EPISODE GUIDE WINDOW
41
6
Using the USB Media Player
USING THE USB MEDIA PLAYER
Playing USB Media
The USB Media Player allows you to connect a USB thumb drive to
your TV and view photos.
To play your USB media:
1. Connect your USB thumb drive to the USB port on the side of
the TV.
2. Use the Arrow buttons to highlight Yes and press the OK.
If the dialog box disappears, press the V button on
the remote to go to the next step.
3. Use the Arrow buttons to highlight your USB device in the list
and press OK.
4. Use the Arrow buttons to highlight Photo and press OK.
5. Use the Arrow buttons to highlight the photo you want to
display. Press OK. The photo displays.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
USB PORT
Preparing Your USB Drive to Play USB Media
To play USB media, you must first save your photos onto a USB
thumb drive:
• The USB thumb drive must be formatted as FAT32.
Removing the USB Drive from the TV
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
• Files on the USB thumb drive must end in a supported file
extension (.jpg or .jpeg.).
To safely remove your USB drive from the TV:
• The player is not designed to play media from external
hard drives, MP3 players, cameras, or smartphones.
1. Turn off the TV.
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
42
6
Folder Contents
Back Button
Highlight this button
and press OK to return
to the previous screen.
Connected
Sources
Displays
connected USB
devices.
VIZIO
Photo
Back Button
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
This area displays the
contents of the currently
selected folder. You can
browse files and folders
using the Arrow and OK
buttons on the remote.
VIZIO_2GB\Photo\root
USB1:
Current Folder
root
Start Fullscreen
Slideshow
A.jpg
B.jpg
C.jpg
D.jpg
E.jpg
F.jpg
H.jpg
I.jpg
Start Slideshow
Sort by Name or Date
Sort:
Name A-Z
View Thumbnails/Folders
View:
Thumbnails
Adjust Slideshow Settings
Settings
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
G.jpg
Page 1 of 1
Photo Information
Page Information
Displays the name,
resolution, and file
size of the currently
selected photo.
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information
is displayed here.
PHOTO VIEWER
43
Troubleshooting & Technical Support
A
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web:
www.VIZIO.com/support
Hours of operation: Monday - Friday: 5 AM TO 8 PM (PST)
Saturday - Sunday: 7 AM TO 4 PM (PST)
We speak English • Se habla Español • Nous parlons Français
44
A
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
different input source.
There is no sound.
• Press Volume Up on the remote control.
• Press the MUTE button on the remote to ensure mute is
off.
• If you are using cable TV, satellite, or an antenna
connected directly to the TV, scan for channels. See
Scanning for Channels on page 28.
• Check the audio settings. See Adjusting the Audio
Settings on page 25.
• Ensure the speakers are set to On.
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Check the audio connections of external devices
(Blu-ray player, game console, cable/satellite box) that
are connected to the TV.
• Ensure the power cable is securely attached to the TV.
• Press the Power/Standby button on the remote or on
the side of the TV to turn the TV on.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices
differ; see your device’s user manual for details.
The sound is flat or dialog is not audible.
• Turn off Volume Leveling. See Adjusting the Audio
Settings on page 25.
• Adjust Brightness, Contrast, or Backlight. See Adjusting
the Picture Settings on page 21.
• Press the INPUT button on the remote to select a
different input source.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu.
See Adjusting the Picture Settings on page 21.
• Reset the picture settings. See Resetting the Picture
Settings on page 24.
• Check all cables to ensure they are securely attached.
45
A
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a
digital broadcast signal, the signal is up-converted
(improved) to match your TV’s display capabilities. This
up-converting can sometimes cause irregularities in the
image.
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a
button.
• Replace the remote batteries with new ones. See
Replacing the Batteries on page 11.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The image quality is not good.
• For the best image quality, view high-definition
programs using digital sources. Connect your devices
with HDMI cables.
When I change input source, the volume changes.
• The TV remembers the volume level on each input
source. If the volume level on the new input source is
higher or lower than the level on the source you switch
from, the difference may be noticeable.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
• Use the Volume Up/Down buttons on the remote to
adjust the volume.
The picture is distorted.
• Nearby electrical devices may be interfering with the TV.
Move the TV away from electrical appliances, cars, and
fluorescent lights.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• Set the TV image mode so that the picture fills the
screen. Press the WIDE button on the remote until the
screen is filled, and then press OK.
• See Changing the Screen Aspect Ratio on page 20.
The TV has pixels (dots) that are always dark or always lit.
• Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
46
B
Specifications
E400-B2
E480-B2
40” Class
48” Class
40”
48”
36.13” x 22.87” x 7.48”
36.13” x 21.19” x 2.48”
42.54” x 26.67” x 8.27”
42.54” x 24.86” x 2.48”
17.18 lbs
15.42 lbs
24.23 lbs
20.93 lbs
TV Type:
D-LED
D-LED
Refresh Rate:
120 Hz
120 Hz
1920 x 1080 (1080p)
1920 x 1080 (1080p)
0.461 mm (H) x 0.461 mm (V)
0.549 mm (H) x 0.549 mm (V)
200,000:1
200,000:1
8 ms
8 ms
300 nits
300 nits
178° (H) / 178° (V)
178° (H) / 178° (V)
HDMI Inputs:
2
2
Component Video Inputs:
1
1
Composite Inputs:
1 (Shared with Component)
1 (Shared with Component)
RF Antenna Input:
1
1
USB 2.0 Ports:
1
1
RCA Analog Stereo Output,
Optical Digital
RCA Analog Stereo Output,
Optical Digital
Screen Size:
Viewable Area:
Dimensions w/ Stand:
w/o Stand:
Weight w/ Stand:
w/o Stand:
Maximum Resolution:
Pixel Pitch:
Dynamic Contrast Ratio:
Response Time:
Brightness:
Viewing Angle:
Audio Outputs:
47
B
E400-B2
E480-B2
English, Spanish, French
English, Spanish, French
XRT010
XRT010
Certifications:
UL/cUL, FCC Class B,
HDMI 1.4 (CEC, ARC), Dolby Digital
UL/cUL, FCC Class B,
HDMI 1.4 (CEC, ARC), Dolby Digital
Compliance:
Energy Star 6.0
Energy Star 6.0
120V @ 60 Hz
120V @ 60 Hz
40.41W
49.95W
Standby Power:
<1W
<1W
Zero Bright Pixel Guarantee:
Yes
Yes
OSD Language:
Remote Control Model:
Voltage Range:
Power Consumption:
48
C
Limited Warranty
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1)
year of non-commercial usage and ninety (90) days of commercial
use. If a Product covered by this warranty is determined to be defective
within the warranty period, VIZIO will either repair or replace the Product
at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946)
from 5:00AM to 8:00PM Monday through Friday and 7:00AM to 4:00PM
Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO
SERVICE CENTER. Proof of purchase in the form of a purchase receipt or
copy thereof is required to show that a Product is within the warranty
period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are
warranted for the remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain
warranty service. VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer. PREAUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO
SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection. VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship. This warranty does not cover, for example: cosmetic
damage, normal wear and tear, improper operation, improper voltage
supply or power surges, signal issues, damages from shipping, acts of
God, any type of customer misuse, modifications or adjustments, as well
as installation and set-up issues or any repairs attempted by anyone
49
other than by a VIZIO authorized service center. Products with unreadable
or removed serial numbers, or requiring routine maintenance are not
covered. This one year limited warranty does not cover Products sold
“AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR
DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET
FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH
DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR
LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this
occurs, your product will be restored to you configured as originally
purchased. You will be responsible for restoring all applicable data and
passwords. Recovery and reinstallation of user data is not covered under
this Limited Warranty. In order to protect your personal information, VIZIO
recommends that you always clear all personal information from the
unit before it is serviced, regardless of the servicer.
Zero Bright Pixel Defect Guarantee
This policy covers “zero bright pixel” defects for the duration of the limited
“ONE YEAR WARRANTY” on select new product purchases. To determine
if this guarantee applies to your product, refer to the “DETAILS” tab of
the model’s product information page (www.VIZIO.com) or look for the
“zero bright pixel” guarantee on the box.
D
Legal & Compliance
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used
in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such
interference.
FCC warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Other
Image(s) used under license from Shutterstock.com
50
© 2014 VIZIO INC. ALL RIGHTS RESERVED.
140127OC-NC
Download PDF