Cambridge Audio azur 75180 Specifications

Lettore Blu-ray
Manuale per l'utente
azur
116
651/75180
8
Cambridge Audio
Your movie+ our passion
0
z
<(
:::;
g
8
Cambridge Audio
Contents
~---------------------------------------------~,
....... 3
Introdu ct ion .. ... ... ........... .
... ..... .. .. ... ........ ............. 4
Important safety instructions
Make sure you register your purchase.
Limited wa rranty ........ .. .
Visit: www.cambridge-audio.comj care
Compatible disc types ............... .......... ...... . ..
.. .6
...... ... ... ......... ......... ....... 7
Rear pane l connections .. .... .. ..... .. ........ .. .................. .......................... .... ..... 8
By registering, you 'll be the first to know about:
• Future product releases
• Software upgrades
• News, events and exclusive offers plus
competitions!
This guide is designed to make install ing and us1ng this product as
easy as possible. Information in this document has been carefully
checked for accuracy at the time of pnnting; however. Cambridge
Aud1o 's policy •s one of continuous improvement, therefore design
and specifications are subject to change without prior notice.
Th1s document contains proprietary info rmati on protected by
copyright. All nghts are reserved. No part of this manua l may be
reproduced by any mechanical. electronic or other means. in any
for m. Without pnor written permission of the manufacturer. All
trademarks and registered trademarks are the property of their
respective owners.
Copyrigl1t Cambnclge Aud 1o Ltd 2011
Manufactured under license from Dolby Laboratories. "Do lby" and
tl1e double-D symbol are trademarks of Dolby Laboratories.
Manufactured under l1cense under U.S. Patent #'s: 5,451,942:
5.956 .674: 5.974.380: 5,978.762 : 6,226.616: 6.487.535:
7.392.195: 7.272.567; 7.333,929; 7.212,872 & other U.S. and
worldwide patents 1ssued & pending. DTS and t he Symbol are
reg1stered trademarks. & DTS-HD. DTS-HD Master Audio 1
Essential and the DTS logos are trademarks of DTS . Inc. Product
in cludes software. © DTS, Inc. Al l Rights Reserved.
"HDMI"."HDM IIogo" and "H1gh-Defmit1on Multimedia Interface" are
trademarks or registered t rademarks of HDM I Licensing LLC.
"Biu-ray Disc". "Biu-ray", "Biu-ray 3D". "BD-Live", "BONUSVIEW", and
the logos are trademarks of Blu-ray Disc Association.
HDMI connections ........... ....... ..... .......... ........ .... .... .. ...... ...... ................... ... 13
····-··-····--·······---···· -·· ·· ····· ····· · ·······-~
Setting up the player .......
Accessing the Easy Setup Wizard ......... ....... ....... .. ................................ 15
Choose the primary video output ............................... ... ... ...... .............. 15
Select the best output reso lution .................... .. ............... ........ ............ 15
Determine the disp lay aspect ration ................ .. ..
...16
........ .. ......... ...... 16
Select the audio setting ..
Operati ng instructions ........ ........ ............... .. .... ....... ..
.. ..................... 17
Pictu re- m-Picture and Secondary Audio ......... .... ......... ..... ....... .. ...... .... 18
BD-Live .. ....... ... .. .....
. ........ .. ... ... .. .. ....... ................. ... ............... .. .. ...... 18
Output resolut io n ........................................ .... .. .. .. ..... ....... .. ................ .. 19
TV system selection ... .. .............. ..... ... .... .. ...... ...... .......... .. .... ...... ............ 19
Other media playback ........... ... ................ .......... .. ......... ...... ....... ............ .. 20
Connecting a USB or a n e-Sata Drive .. ................... ........ ............ .......... 20
Using the Setup Menu Syst em ................................... .. .. .......................... 22
Playback Setup ... ...... ...... .... ... ... ................ .......... .... .. .. .. ................ .... ...... 23
Video Setup ........... .. ... ... ........ .... ... . ... .... .. ........ .. .. .. .... .. .... .. ...................... 24
.............. ... ...............................27
Aud io Format Setup .... ... ...... ...... .
DVD Logo is a trademark of DVD Format/ Logo Licensing Corp ..
registered in the U.S .. Japan and other countries.
Audio Processing setup
..29
Speaker Con figuration
.30
Designed for Windows Media. Microsoft. HDCD. and the HDCD
logo are trademarks or registered trademarks of Microsoft
Corpo rat •on in the Un1ted States and/or other countries.
"DivX" is a trademark of DivX, Inc.
"Qdeo" and "QuietVideo" are trademarks of Marvell or its affiliates.
All other tradema rks are the properti es of their respective owners.
'- ~ ...\
/
I
2
Audio connections ......................................... .. ...... ........ .... ................ .. ...... 12
Ana logue video connections .. .. .................... ......... ... .......... .... ..... .. ....... .... 13
Audio signal reference chart ...... ..
".1\VCHD" and the "AVCHD" logo are tradema rks of Panasonic
Corporation and Sony Corporation.
,'
I
Remote control ................. ..................................................... ...... ......... ..... 10
Connecting to the lnternet ........... ... ...... .............. .. .................................... 11
Java and all Java-based trademarks and logos are tra demarks or
registered trademarks of Sun Micro systems. Inc. in th e United
States and other countries.
Super Audio CD. SACD and the SACD logo are JOint t rade marks of
Sony Corporation and Philips Electro nics N.V. Direct Stream Digital
(DSD) is a trademark of Sony Corporation.
\
Front panel controls and display ........................... .. .. .. ... .. ...... .................... 9
"
'
Recommended audio format options ....
Other Audio Processi ng Settings ...
Device Setup .......................... .
Network Setup ................. ..
Picture Adj ustment... ... ....
Appendix- language code list ...
....... .......... 28
.... 29
.31
. ........................................... 31
.. .......... ...... .... ....................... ............ .... 33
..... ............ ......... ............................. ...... .34
..................... ......................... .. ...... .... 37
Techn ica l specifications ........ .. .. ... ... ... ... .................... ... ... ........... ............... 38
Troubleshooting ........... ... .... ... ...... ... ... .... .... ................... ... .. .. .. .... _... .._..... .... 39
azur
651/7518 0
Introduction
I
Thank you for purchasing this Cambridge Audio Azur Blu-ray Player. Uke
all Cambridge Audio products, our Blu-ray players adhere to our three
core principles - stunning performance, ease of use and Incredible
value.
The 651BD/751BD both features almost universal disc compatibility and
can play back CD, HDCD, DVD-Video, DVD-Audio, Super Audio CD and BtuRay discs including those with 3D content. 24/ 192kHz Digital to Analogue
converters and our usual careful audio design ensure that the
651BD/751BD can reproduce the dynamics and scale required for
modern movie soundtracks whilst also being able to reproduce a
genuinely musical performance with either stereo or multi-channel music
discs.
A full range of HDMI, digital and analogue outputs are fitted. These allow
the connection of suitably equipped TVs and AV receivers.
Twin HDMI outputs allow two screens or a screen and a projector to be
connected at the same time. Both are fully compatible with the HDMI 1.4
standard for 3D TV and deepcolour support.
The primary output also features a Marvell QDEO scaler with motion
adaptive noise reduction and a host of technologies to further improve
the picture quality for this output.
An Ethernet connection is provided for BD live and other interactive
features via the internet. Additionally the 751BD is supplied with a USB
Wi-Fi dongle.
The latest surround-sound formats are supported including decoding of
Dolby True HD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High
Resolution Audio in Stereo, 5.1 or 7.1 variants. In particular support for
the true lossless Dolby True HD and DTS HD Master Audio formats
provides unprecedented audio fidelity from Blu-ray discs.
The 651BD/ 751BD is also capable of outputting all of these formats as
bitstreams over HDMI for decoding in a suitable AV Receiver.
Both models use 24/ 192kHz Digital to Analogue converters. The 651BD
features a Cirrus Logic CS4382A 8 Channel multi-dac to create its 7.1
analog output (which can be set to Stereo mode also).
The 751BD instead uses five WM8740 stereo DACs from Wolfson
Microelectronics and features both a permanent 7.1 and a separate
Stereo output. For the 751BD all analog outputs are also up-sampled via
an Analog Devices DSP running our proprietary Q5 Upsampling and jitter
suppression algorithm from Anagram Technologies to 24 bits and
192kHz.
Both models feature an environmentally friendly low power (1W) standby
circuit.
All this proprietary engineering is housed within our low resonance,
acoustically damped chassis. An Azur Navigator remote control is also
provided, giving full remote control of your Blu-ray player and if required
a Cambridge Audio amplifier or AV receiver in an attractive and easy to
use handset.
Remember your 651BD/751BD can only be as good as the system it is
connected to. Please do not compromise on your AV receiver or speaker
package and always use good quality video and audio cabling. Naturally
we particularly recommend AV receivers such as those from the
Cambridge Audio Azur range, which has been designed to the same
exacting standards as this product. Your dealer can also supply excellent
quality Cambridge Audio interconnects to ensure your system realises its
full potential.
Thank you for taking the time to read this manual; we recommend you
keep it for future reference.
Matthew Bramble
Cambridge Audio Technical Director
and the 651BD/ 751BD design team
3
8 Cambridge Audio
Important safety instructions
For your own safety please read the following important safety
instructions carefully before attempting to connect this unit to the mains
power supply. They will also enable you to get the best performance from
and prolong the life of the unit:
1. Read these instructions.
The lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
'dangerous voltage' within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of 'important operating and maintenance
instructions in the service literature relevant to this appliance.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
lei
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet. consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.
<I
11. Only use attachments/accessories specified by the manufacturer.
12. Use with only the ca rt, stand, tripod, bracket, or t able
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart;
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the
power-supply cord or plug having been damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has
been dropped.
This product utilises a Laser. Use of controls or
adjustments or performance of procedures other than
those specified herein may result in hazardous
radiation exposure. Do not open covers and do not
repair yourself. Refer servicing to qualified personnel.
CAUTION CLASS 3ft VISIBLE NCJ IMSIBLE LASER IW>IATION WHEN OP£N.
AVOIDOIRECTEYEEXPOSURL
VORSICHT K1..ASSE 3R SICiilliAA£ UNO liNSICHT8AAE L.ASERSTIIAHLU"--G MNN
GEOFFNET. UP&ITTEL..BAAEH AUCENKONTAKT \IEIWEJDEN.
ADVARSEL SYNUG OG USYNUG LASERSTlW..JNQ Af KL.ASSE 3ft VED .As..a.
UNOGA AT Sf OKKJE PA STRAa.fN.
A.OVARSEl SY'NLG OG USVNUG ~ ll<l..ASS£ 3R NA.R DEKSa. APNEs.
UNNGA OtREKTE EKSPON€RING AV BVNENE.
VARNNG
VAROI
KLASS 3ft SYN.IG OCH OSYNJGI.ASERST~Ifr«i NAR DENNA 00. AR
OPI'No\0. UNOVIK ATT DIREKT EXf'ONERA OGore<~ FOA STRk.NiNGEN.
AVAnuNA LUOKAN 3R N.I.Kvv.UJA Jdii:YMATONT.l L.ASERsATEILVA.
YAlTA KATSEEN SUORMALnSTAMISlA.
n mr""'•••lll---..•-•u:utt<Ju
This label is located on the laser protective housing inside the product.
WARNING
- To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture.
- Batteries (battery pack or batteries Installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
The unit must be installed in a manner that makes disconnection of the
mains plug from the mains socket outlet (or appliance connector from
the rear of the unit) possible. Where the mains plug is used as the
disconnect device, the disconnect device shall remain readily operable.
Only use the mains cord supplied with this unit.
Please ensure t here is ample ventilation (at least 10cm clearance all
round). Do not put any objects on top of this unit. Do not situate it on a
rug or other soft surface and do not obstruct any air inlets or outlet grilles.
Do not cover the ventilation grilles with items such as newspapers,
tablecloths, curtains, etc.
This unit must not be used near water or exposed to dripping or splashing
water or other liquids. No objects filled with liquid, such as vases, shall be
placed on the unit.
4
The symbol on this product indicates that it is of CLASS 11
(double insulated) construction.
WEEEsymbol
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please return the
unit or contact the authorised dealer from whom you purchased this
product for more information.
(€
CE mark
This product complies with European Low Voltage
(2006/95/EC), Electromagnetic Compatibility (2004/108/EC)
and Environmentally-friendly design of Energy-related Products
(2009/125/EC) Directives when used and installed according to this
instruction manual. For continued compliance only Cambridge Audio
accessories should be used with this product and servicing must be
referred to qualified service personnel.
c
C-lick mark
This product meets the Australian Communications Authority's
Radio communications and EMC requirements.
t:P\. Gost-R Mark
....... This product meets Russian electronic safety approvals.
azur
651/7518 0
Wi-Fi information
Ventilation
IMPORTANT- The unit will become hot when in use. Do not stack multiple
units on top of each other. Do not place in an enclosed area such as a
bookcase or in a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this
happens, switch off immediately, disconnect from the mains supply and
contact your dealer for advice.
Positioning
Choose the installation location carefully. Avoid placing it in direct sunlight
or close to a source of heat. No naked flame sources, such as lighted
candles, should be placed on the unit. Also avoid locations subject to
vibration and excessive dust, cold or moisture. The unit can be used in a
moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a
sealed area such as a bookcase or in a cabinet. Do not place the unit on
an unstable surface or shelf. The unit may fall, causing serious injury to
a child or adult as well as serious damage to the product. Do not place
other equipment on top of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be located
nearby due to possible interference.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down and the sonic properties will improve over this time.
Power sources
The unit should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power-supply to
your home, consult your product dealer or local power company.
This unit can be left in Standby mode when not in use and will draw <1W
in this state. To turn the unit off, unplug it from the mains socket.
Overloading
Do not overload wall outlets or extension cords as this can result in a risk
of fire or electric shock. Overloaded AC outlets, extension cords, frayed
power cords, damaged or cracked wire insulation and broken plugs are
dangerous. They may result in a shock or fire hazard.
Be sure to insert each power cord securely. To prevent hum and noise, do
not bundle the interconnect leads with the power cord or speaker leads.
Cleaning
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an
aerosol at or near the unit.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Cambridge Audio, of Gallery Court, Hankey Place, London SE14BB,
declare under our sole responsibility that this device,
azur 651j751BD with Wi-Fi dongle
to which this declaration relates, complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The device shall be used in such a manner that the potential for human
contact during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall
be placed in such a manner to minimize the potential for human contact
during normal operation. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
Battery disposal
FCC Radiation Exposure Statement
Please dispose of any discharged batteries according to local
environmental/electronic waste disposal guidelines.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and
your body.
Connections
Before making any connections, make sure all power is turned off and
only use suitable interconnects.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Servicing
2.4GHz operation of this product in the USA is firmware-limited to
channels 1 through 11.
These units are not user serviceable. Never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem.
A serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your dealer.
Modifications
The FCC requires the user to be notified that any changes or modifications
to this device that are not expressly approved by Cambridge Audio, may
void the user's authority to operate the equipment.
II
8
Cambridge Audio
Wi-Fi information
Limited warranty
Canada-Industry Canada (IC)
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio's option) this
product or any defective parts in this product. Warranty periods may vary
from country to country. If in doubt consult your dealer and ensure that
you retain proof of purchase.
The wireless radio of this device complies with RSS 210 Industry Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth
for uncontrolled environments. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Cet appareil numerique de Ia classe B conforme
Canada.
a Ia norme NMB-003 du
Europe-European Union Notice
Radio products with the CE 0889 or CE alert marking comply with the
R&TIE Directive (1995/5/EC) issued by the Commission of the European
Community.
Compliance with this directive implies conformity to the following
European Norms.
• EN 60950-1 - Product Safety.
• EN 300 328 -Technical requirement for radio equipment.
• EN 301489 - General EMC requirements for radio equipment.
To determine the type oftransmitter, check the identification label on your
Cambridge Audio product.
Products with the CE marking comply with European Low Voltage
(2006/95/EC), Electromagnetic Compatibility (2004/108/EC) and
Environmentally-friendly
design
of
Energy-related
Products
(2009/125/EC) Directives issued by the Commission of the European
Community. Compliance with these directives implies conformity to the
following European Norms.
To obtain warranty service, please contact the Cambridge Audio
authorised dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your Cambridge Audio product,
it can be returned by your dealer to Cambridge Audio or an authorised
Cambridge Audio service agent. You will need to ship this product in either
its original packaging or packaging affording an equal degree of
protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which
is evidence that this product is within the warranty period, must be
presented to obtain warranty service.
This warranty is invalid if (a) the factory-applied serial number has been
altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you made a
purchase from a Cambridge Audio authorised dealer.
This warranty does not cover cosmetic damage or damage due to acts of
God, accident, misuse, abuse, negligence, commercial use, or
modification of, or to any part of, the product. This warranty does not
cover damage due to improper operation, maintenance or installation, or
attempted repair by anyone other than Cambridge Audio or a Cambridge
Audio dealer, or authorised service agent which is authorised to do
Cambridge Audio warranty work. Any unauthorised repairs will void this
warranty. This warranty does not cover products sold AS IS or WITH ALL
FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE
THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED
WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL
PURPOSE.
• EN 61000-3-2 - Power Line Harmonics.
Some countries and US states do not allow the exclusion or limitation of
incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other statutory rights, which vary from state to
state or country to country.
• EN 61000-3-3 - Power Line Flicker.
For any service, in or out of warranty, please contact your dealer.
• EN 55022 - Electromagnetic Interference.
• EN 55024- Electromagnetic Immunity.
• EN 60950-1 - Product Safety Products that contain the radio
transmitter are labeled with CE 0889 or CE alert marking and may also
carry the CE logo.
• EN 62301:2005 - Household electrical appliances. Measurement of
standby power.
• 1275/2008 - Implementing EuP Directive for Standby Power
Consumption.
Plug-fitting Instructions (UK only)
The cord supplied with this appliance is factory-fitted with a UK mains plug fitted with
a 3-amp fuse inside. If it is necessary to change the fuse, it is important that a
3-amp fuse is used . If the plug needs to be changed because it is not suitable for
your socket, or becomes damaged, it should be cut off and an appropriate plug
fitted following the wiring instructions below. The plug must then be disposed of
safely, as insertion into a mains socket is likely to cause an electrical hazard. Should
it be necessary to fit a 3-pin BS mains plug to the power cord, the wires should be
fitted as shown in this diagram. The colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings identifying the terminals
in your plug. Connect them as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked with
the letter 'N' or coloured BLACK.
GREEN/ E
YELLOW
The wire which is coloured BROWN must be
connected to the terminal which is marked with
the letter ' I.: or coloured RED.
BLUE-,.,,._.,..;·n~l
FUSE
N
The wire which is coloured GREEN/YELLOW must
be connected to the terminal which is marked
with the letter 'E' or coloured GREEN.
If a standard 13-amp (BS 1363) plug is used, a 3-amp fuse must be fitted or, if any
other type of plug is used, a 3-amp or 5-amp fuse must be fitted, either in the plug
or adaptor, or on the distribution board.
6
azur
Compatible disc types
~
.,,u._,o,.c
BD-Video
High Definition Blu-ray movie and music discs in BD-ROM ,
BD-RE and BD-R formats.
B/u-rag
Blu-ray 3D
651/75180
BD-ROM compatibility
I
Since the Blu-ray Disc specifications are new and evolving, some discs
may not play properly depending on the disc type, version and encoding.
It is possible that a Blu-ray disc manufactured after the player was
manufactured uses certain new features of the Blu-ray Disc
specifications. To ensure the best possible viewing experience, the player
may need a firmware or software update from time to time.
3Dw. Discs
supporting 3D Blu-ray content playback. 3Dcompatible displays and active shutter glasses are required for 3D
playback.
BONUS VIEW
Discs supporting BONUSVIEW that allows Virtual packages or Picture-inPicture functions to be used.
BD~
,_LIVE••
Blu-ray Discs with interactive features when the player is connected to
the Internet.
~
VIDEO"'
~
DVD-Video
DVD movie discs in DVD+RW/ DVD+R/ DVD-RW/ DVD-R
formats.
DVD-Audio
DVD format discs contain ing multi-channel or stereo high
resolution audio of up to 24/ 96 5.1 or 24/ 192 resolution
with video or still pictures. Some DVD-Audio discs also contain a DVDVideo portion.
"" 0 , 0
N
Copyright protection
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of
this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation . Reverse
engineering or disassembly is prohibited.
Region management information
This player is designed and manufactured to respond to the region
management information of DVD or BD discs. If the region number of a
BD-Video or DVD disc does not correspond to the region number of this
player, this player cannot play the disc.
BD-Video - This player plays BD·Video with marks that match the code on
the back of the unit (i.e. A, B or C).
Discs that have no region coding are also playable. These usually have all
3 region codes on the packaging in a pyramid.
60 Super Audio CD
SUPER~co High resolution audio-only discs with stereo andj or multi-
channel audio recorded in a special bitstream format called
DSD. Hybrid discs with both high resolution DSD and CO-compatible
layers are supported.
Compact Disc
DVD-Video - This player plays DVD-Video with marks that match the
region code on the back of the unit (i.e. 1, 2, 3, 4 or 5).
Compact Discs (CO-DA) and CD-R, CD-RW discs.
Discs that are encoded for All regions are also playable.
l\VCHD N
High-definition digital video camera format.
lt-OCoj
CD discs containing HDCDTM encoded material.
Discs that cannot be played
• BDs with cartridge
• DVD-RAMs
• HD DVDs
• Data portion of CO-Extras
• BD-VideojDVD-Video with a different region code to the Blu-ray player
you have purchased .
• Some Dual Discs: A Dual Disc is a two sided disc with DVD on one side
and digital audio on the other side. The digital audio side does not
generally meet the technical specifications of the Compact Disc Digital
Audio (CO-DA) format so playback is not guaranteed.
• Music discs encoded with copyright protection technologies: among
such discs, some again do not conform to the CD standard so playback
is not guaranteed.
Disc care and handling
• To keep the disc clean from scratches or fingerprints, handle the disc
by its edge. Do not touch the recording surface.
• Blu-ray Discs record data in very high density and the record layer is
very close to the disc surface. For this reason, Blu-ray Discs are more
sensitive to dust and fingerprints than DVD. Should you encounter
playback problems and see dirty spots on the disc surface, clean the
disc with a cleaning cloth. Wipe the disc from the centre out along the
radial direction. Do not wipe the disc in a circular motion.
• Do not use record cleaning sprays or solvents such as benzene, thinner
and anti-static spray.
• Do not attach labels or stickers to discs as this may cause the disc to
warp, become imbalanced or too thick, resulting in playback problems.
• Avoid exposing the discs to direct sunlight or heat sources.
• Do not use the following discs:
- Discs with exposed adhesive from removed stickers or labels. The
disc may get stuck inside the player.
- Warped or cracked discs.
- Irregularly shaped discs, such as heart or business card shapes.
7
8 Cambridge Audio
Rear panel connections
'"'
8
Cambridge Audio
__(3')_
Dooilf>od..-.I ......... ~ .._E~
3
-751BOBJu..nyot.cPI.,.,
nc
)JE'' ''(2l
"-E'thtrnet-
~@
(4)
~
(6)
(7)
(8)
~ @@ @ rn E3 ~ jg]@
...... Cr/f'l
HOM! Oul 2
Cll/PO
In
' - - VICieo Outwtl--' IA(mlttllr
I.IS8
-..s.t.-
HO!oll0u'l1
' - - OIIite!Oulcuts-'
I
I
~
8
Cambridge Audio
- - -·- -
azw65180 ~ DIIC Pl8y'M'
~~· ftl
3
_(3)_
0@
(4)
~
(6)
~c~ @@@ rn ~
"- Ettie" * -
Cb/1'1:1
HOMIOUt2 L _VIdeo Outpo.tts-
I
I
Cr/ l'r
In
III Emltleo
US8
~ .sat. -
ffl
_(8}_
~
jg]@
......
HDMI Outl
~.
"-- Df&UI~ _.
..
..
®
RS-232C
®r!J,® 0@
~~~~
Fll
511
SW
@~
·-- 1
SBR
"--------U CI>Ionne1 A\Idio Out ~ '--s-Audb OUt ___,
@
@
r
I
@~
@
?
·-- 1
®r!J,®
~~~~
®
,.,,,
r
F11
SR
sw
seA
....____ 7.1 Chenne1AucHoOut _ _ _ _ )
I
I
@ Ethernet LAN port
® e-Sata port
Used for discs supporting BD-Live that provide interactive features when
the player is connected to the Internet.
For connecting a suitable hard drive.
Future firmware updates may allow other online features to be accessed.
0
® HDMI output 2
HDMI (High-Definition Multi-Media Interface) is a purely digital connection
that can carry both audio and video. Use a dedicated HDMI cable to
connect to a TV/ Monitor or AV Receiver with a compatible HDMI input.
HOM I output 1 (primary output)
Secondary HDMI output. Both outputs 1 and 2 can be used at the same
time to send the same audio/video to two displays (with both being 3D
TV compatible) or to send audio over one HDMI link and video over the
other.
This output is the primary output and benefits from the Marvell QDEO
video processor. Both this output and output 2 are 3D TV compatible.
See later section of this manual.
® Digital outputs
®Analogue video outputs
Component- Connect to the YCbCr or YPbPr terminals of a television set
via three 75 ohm RCA/phono cables designed specifically for video use.
Composite- Connect to your television via a 75 ohms RCA/Phono cable
designed specifically for video use.
0
IR (Infra-Red) Emitter In
Allows modulated IR commands from multi-room systems or IR repeater
systems to be received by the unit.
®usa port
Optical and Coaxial digital audio outputs, normally used to connect to a
suitable Audio/Video Receiver for surround sound decoding (output must
be set for "Bitstream• - refer to the "Audio setup" section). These outputs
can also be used to connect to a separate DAC or digital recording device
(output must be set for "LPCM"- refer to the "Audio setup" section).
Tosllnk Optical- Use a high quality TOSLINK fibre optic cable.
5/ P DIF Co-Axial Digital - Use a high quality 75 ohm digital RCA/Phono
interconnect cable designed specifically for digital audio use.
@RS232C
Used for control of the 651/ 7518D in Custom Install situations. A full
protocol is available for the 651/751BD on our website.
Port for interfacing to a flash/memory card or Mass Storage Device.
@ 7.1 channel analogue audio output
Note:
If Down-mix is set to "7.1 CH' in the Speaker Setup page (Down-mix mode
section) of the 651/ 7518D's Setup menus, these sockets provide 7.1
output from the 651/7518D's built in Surround-Sound decoder. This can
be used to connect to the 7.1 aud io line-level inputs of an amplifierjAV
receiver or amplified speaker package if required. Similarly, Down-mix
can be set to "5.1 CH" to provide 5.1 output. If Down-mix is set to "LT/ RT",
"Stereo· or "V.Surround' the Left and Right outputs only are active and
provide a stereo or stereo downmixed output. Refer to the "Speaker
configuration• section ofthis manual for more information.
• This unit supports USB Mass Storage Class Bulk Transport devices only.
Most USB thumbs drives, portable hard disk drives and card readers
conform to this device class. Other USB devices such as MP3 players,
digital cameras, and mobile phones that include their own memory
management may not be compatible.
• Supported USB drives must be formatted with the FAT (File Allocation
Table), FAT32 or NTFS (New Technology File System) file system.
• In some cases, an incompatible USB device may cause the player to
stop responding. If this occurs simply turn off the power, remove the
USB device, and turn the player back on.
• The player accesses the USB drive in read-only mode. In order to
minimize the risk of data corruption, it is recommended that you only
unplug the USB device when playback has completely stopped.
@Stereo audio out (75180 only)
Permanent stereo outputs for use with Stereo material.
@ AC power socket
Once you have made all audio and video connections, plug the IEC type
AC power cable into t he rear of the unit and an appropriate mains socket
then switch on. Your 651/7518D is now ready for use.
8
azur
651/7518 0
Front panel
8 Cambridge Audio
~
0
0
S!llndby/On
....
•
g
0
0
[II
©
®
[I
0
•
©
I)
0
...
,..
©©©©
--
[II
•
g
~
~
®
0
®
®
I
Blu-ray Disc Player
!]
•
®
I)
©
0
•
11> / 11
... ...
©©©©
® ®
@
I
I
I
@
® ®
azur 651BD
~
....
0
Standby/On
•
... ...
I
8 Cambridge Audio
0
Standby/On
Switches the unit between Standby mode (indicated by a dim power LED)
and On (indicated by a bright power LED). Standby is a low power mode
where the power consumption is less than 0.5W. The unit should be left
in Standby mode when not in use.
I
azur 751BD
Blu-rayDiscPiayer
I
I
0
~-
"""
~
® ®
0
":,ft s-
®
2
I
Filter Select (75180 only)
Press to select between three different filter audio modes: linear phase,
minimum phase or steep. The corresponding LED will light up to show
which filter has been selected. See later section for details.
®Display
® IR sensor
Receives IR commands from the supplied Azur Navigator remote control.
A clear unobstructed line of sight between the remote control and the
sensor is required.
Used to display the 651/751BD's functions and playback state, etc.
Please refer to the front panel display section on right for more
information.
®Disc tray
@USB port
Use the Open/ Close button to activate.
Port for interfacing to a flash/memory card or "Mass Storage Device".
Notes:
• Only USB 2.0 certified products with the USB 2.0 logo on them are
supported by the 651/751BD. Please either consult the manufacturer
of the USB 2.0 product to make sure it is properly certified, or go to
www.usb.org for a list of approved products. We cannot be held
responsible for any incompatibility issues.
• This unit supports "USB Mass Storage Class Bulk-Only Transport"
devices only. Most USB thumb drives, portable hard disk drives and card
readers conform to this device class. Other USB devices such as MP3
players, digital cameras, and mobile phones may not be compatible.
• See rear USB port section for file system compatibility.
0
Open/Close
Allows you to open and close the disc tray for loading of discs. Pressing
Play will also close the tray and start playing a disc if one is loaded.
® Play/Pause
Plays the disc and pauses (freezes) playback.
®stop
Press once to stop playback. Pressing Play will cause the playback to be
re-started from the same position. Press Stop again to fully stop playback.
@Skip
Press once to skip between tracks/chapters.
Front panel display
2
1
I
3
2 4
5
I
I
I
I
6
7
I
I
9 10
8
I
I
I
6. Playback Status - Indicates playback status such as Play, Pause,
Repeat, Repeat All, Random/ Shuffle, and A-B Repeat.
7. Angle Icon - Indicates that the scene contains additional camera
angle(s) that can be selected.
I
11 12
!
!
13
14
1. Disc Type Indication - Indicates t he currently playing disc type.
2. Track/Chapter - When illuminated, the displayed time applies to a
track or chapter.
3. Title/ Group - When illuminated, the displayed time applies to a title
or group.
4. Total - When illuminated, the displayed time is the total play time.
8. HDMI - Indicates that the HDMI output is active.
9. Network- Indicates that the unit is connected to a network.
10. Wireless - Indicates a connection to a wireless network.
11. Mute Icon - Indicates that the audio is muted.
12. Audio Channel Indication - Indicates whether the audio is 2ch stereo
or multi-{;hannel surround.
13. Main Display - Text messages and numeric display.
14. Audio Type Indication - Indicates the type of audio tracks playing.
5. Remaining - When illuminated, the displayed time is the remaining
playtime.
9
8
Cambridge Audio
Remote control
The Azur 651/75180 is supplied with a remote control.
Insert the 3 supplied AAA batteries to activate. For further
details of the various adjustment functions available, refer
to the later sections of this manual.
••••
Opens and closes the disc tray.
A-B/Repeat
•<!>
Switches the unit between On and Standby mode.
Info/Source
Press to show/hide the On Screen Information Display.
Press and Hold to go to the Source Selection menu.
0-9 Numerical buttons
Used to enter numeric values such as the number of a
desired chapter or track to go to.
Page • / Page ...
Show previous; next page.
G}
Colour buttons
These button functions vary by the content. See later
section of the manual.
@808
®888
®888
@888
@@8@
Press to go to the Home menu.
Go To
Press once to bring up an OSD bar showing (from left to
right) Playing Status, Title, Chapter, Time Counter, Progress
Indicator, and Total Time. After pressing the Go To button
for the first time, the cursor will be positioned at the Time
Counter. This is the "Time Search" mode. Each subsequent
press of the Go To button moves the cursor from Time to
Chapter to Title and back round. Use the Numerical or
Navigation button to enter the hours, minutes and seconds
for your specified search and press the Enter button.
Clear
Press to remove outstanding track programs.
Top Menu
Show BD top menu or DVD title menu.
Pop Up Menu
Show BD pop-up menu or DVD menu.
Setup
Press to enter the Setup menu. Please refer to the "Biu-ray
player setup" section of this manual for more information.
Pure Audio
~
Press and hold to access Repeat function. When pressed
for a few seconds, the Repeat function will cycle as follows:
DVD and DVD-Audio - Repeat Chapter, Repeat Title,
Repeat All, Repeat Off.
Blu-ray Disc - Repeat Chapter, Repeat Title, Repeat Off.
CD and SACD - Repeat One, Repeat All, Repeat Off.
SAP/PIP
Press to turn Secondary Audio Program on/off. Press and
hold to cycle showjhide Picture-in-Picture. Refer to later
section of the manual.
Angle/Zoom
Press to access various camera angles (if available on the
disc). Press and hold to cycle through the various zoom
magnifications (and back to normal display).
Note: These features may not be available with certain
DVD or Blu-ray discs.
ResjTVType
808@
8888
••••
@@@@
®8'®0
Turn video off/ on.
• ... •
Press to mark a segment between A and B for repeated
playback. The first press marks point A, the second press
marks point B.
Navigation
Press to switch output resolution. Press and hold to cycle
through TV system output between PAL, NTSC or Multi.
Refer to later section of this manual.
Important Information if you are using a Cambridge Audio
amplifier or AV receiver
AmpjAVR buttons
The 651/75180 remote also has buttons that allow
control of a Cambridge Audio azur amplifier or AV receiver.
Note: These buttons are by default set to transmit codes
for all current Azur AV Receivers.
The exceptions to this are the older 340R and 540R
models. For these models, simply remove the batteries,
leave the remote for a few minutes and then hold down
the Source button whilst re-Inserting the batteries.
To control an Azur stereo Amplifier, follow the same steps
as above, but hold down the Standby/On/Mute button.
Press the directional arrows to move around menus.
0
Enter
Press repeatedly to scroll through the source inputs
one by one.
Press to accept the item/function highlighted in the menu.
~Ill
Press to play or pause playback.
•
..
Press to stop current playback.
Press to return to the previous menu.
Audio/Subtitle
Press once to access alternate audio soundtracks on the disc (if available
on the disc).
Press and hold to access Subtitle function. When pressed for a few
seconds, the Subtitle function will cycle through available languages.
Source
Source
<!>!~
Standby/On/Mute
Press to switch the amplifier/AV receiver between Standby
mode and On. Press and hold to mutejun-mute the
amplifier/AV receiver.
~Volume
Press to decrease or increase the volume of the amplifier/
AV Receiver.
By default the Standby/Mute and Volume buttons on the remote control
will control a separate Cambridge Audio Amplifier or AVR.
For users who don't have a Cambridge Audio amplifier or AjV Reciever,
the 651/75180 has an optional internal volume control that can be
access via the remote control only.
.
Press and hold the G1 button on the remote whilst inserting the batteries
to enable this feature.
~~
In this mode pressing the Standby/Mute will control 651/751BD's mute
function and Vol upjVol down buttons will control 651j751BO's volume
function.
~
Scan forwards and backwards
Right Skip - Press once to skip forward by one trackjchapter on the disc.
Left Skip - Press once to skip backward by one track/chapter on the disc.
Note: The volume control will start when first enabled at maximum
volume. Ensure you turn this down to minimum before connecting and
using the 651/75180 with an amplifier.
Once enabled, the volume will always retain its last used setting at power
upjdown.
10
azur
651/7518 0
Connecting to the Internet
Ethernet connection
Using the wireless adaptor (75180 only)
The 651/751BD supports the BD-Live feature offered on some Blu-ray
Disc titles. BD-Live offers extra downloadable content and additional
online interactive programs. The available BD-Live content varies by discs
and studios, and may include additional subtitles, commentaries, movie
trailers, games, and/or online chat.
The wireless adaptor included with the 751BD has been pre-configured
to work with your player. Other wireless adaptors will not work.
Network Cable
(Ethernet)
Internet
~
WAN
~~~~
1LAN
2
43
Internet
~
WAN
Wireless Broadband
Router/ Modem
Broadband Internet
~
connection
Connecting the player to the Internet will also allow the player to obtain
firmware updates via the Internet.
In order to utilize the BD-Live feature or update firmware via the Internet,
the player needs to be connected to a broadband Internet connection. It
is not necessary to connect to the Internet if you do not intend to use the
BD-Live and online firmware updating functionality.
Wireless Broadband
Router/Modem
Broadband Internet
connection
A USB extension cable is provided with your 751BD. This can be used if
desired to move the wireless dongle to a more convenient location.
• Plug one end of a network cable (Category 5/5E straight through
Ethernet cable) into the LAN port on the back of the unit.
• Plug the other end of the network cable into a LAN port on your
broadband router or modem.
• Some network configuration may be required. Please refer to the
Network Setup section of the manual for more details.
• Make sure the broadband Internet connection is available and the
Wi-Fi function on your wireless router or access point has been turned
on, and plug the adaptor into the rear USB 2.0 port of your 751BD.
• Refer to the operating instructions supplied with the broadband router
or modem, or contact the Internet service provider for questions related
to setting up of a router or modem.
• After connecting the adaptor, some network configuration is required.
Please refer to the 'Network Setup' section of this manual.
Note: Only connect the LAN port of the player to an Ethernet port that
supports 10BASE-T or 100BASE-TX. Connecting to any other ports or
jacks, such as a phone jack, can damage the player.
11
I
8
Cambridge Audio
Audio connections
Do not plug in the mains power lead or turn the unit on until all
connections have been made.
Note: It Is also possible to make an HDMI audio/video connection which
carries both audio and video In the same cable. See later section.
Three types (two for 6518D) of audio only connection can be made
between the 7518D and your stereo/AV system:
However, when making an HDMI connection i.e. to an AV receiver, it is
also often preferable to make an additional audio connection for CD
and/ or SACD/DVD-A playback.
0
Separate Analogue Stereo
(7518D only)
® Digital Audio
In
@
In
AV receiver
~ @
0
®Analogue 2 ch/5.1/7.1
00000000
0 0 0 0 0
0
@ @
(!L®
OR
Phono cable
(2RCA-2RCA)
Front left
speaker
@
@
0
0
0
0
Surround left
speaker
Front right
speaker
Surround right
speaker
Subwoofer
Speaker diagram shown for 5.1 channel setup. For 7.1 add two rear speakers.
0
Separate analogue stereo (75180 only)
The analogue stereo outputs should be used for play back of COs, DVDs
etc in stereo through a conventional amplifier or AV receiver with analogue
stereo inputs.
Analogue stereo is also usually the best connection method for listening
to COs and other stereo discs for best possible sound quality. It is often
a good idea to connect both the analogue stereo outputs (for CD
playback) and digital audio outputs or HDMI (for surround sound
decoding) at the same time.
To connect an analogue stereo system to the 75180, use stereo phono
cables (stereo 2RCA-2RCA).
® Digital audio
The digital audio outputs should be used to decode the surround-sound
soundtracks of 8D/DVDs with an external AV Receiver (Note: Digital output
must be set to "RAW" in the Audio setup page). The 651/75180 sends an
undecoded audio bitstream to the AV Receiver for decoding into 5.1/7.1 etc.
Note: The latest HD audio types, SACD and DVD-A ldillD.Qt be output over
SPDIF/TOSiink and an HOM I connection must be used for these.
Either a 75ohm co-axial cable designed for digital audio or a TOSiink fibre
optic cable should be used (only one at a time).
Note: It is also possible to output stereo digital audio from the Digital
Outputs for recording on conventional CD-R/MD etc. machines, see
section on 651/75180 setup.
12
®Analogue 2 ch/5.1/7.1
The 651/ 7518D is also capable of decoding Surround-Sound
soundtracks itself and outputting these as analogue Stereo, 5.1 or 7.1
depending on the settings in the Speaker setup page in the 651/ 75180
setup menu.
For 5.1, connect to an AV receiver or amplified speaker system, use 6 x
phono/ RCA cables.
For 7.1, connect to an AV receiver or amplified speaker system, use 8 x
phono/ RCA cables.
azur
651/7518 0
Analogue video connections
Also note video up-conversion of content over the component connections
is limited by CSS encryption on most discs.
The 651/7518D can output video in both fully digital (HDMI) and
analogue (Composite or Component) formats. If your TV set supports
HDMI then this is the preferred format (see next section}.
The HDCP protected HDMI outputs do not suffer this limitation and offer
full up-conversion of all content.
If your TV set supports only analogue video the preferred connection is (in
declining order of quality) Component and then Composite.
(!) Component- Connect with 75 ohm Component video cables (3RCA3RCA}.
Set the Primary Output option in the setup menu to 'Analog',
see later section.
Composite -Connect with single 75 ohm video phono cable (RCA~ RCA}.
~
Note: The 651/7518D will output 8D content (including 1080p) as up to
1080i over the component connections only.
HDMI connections
Note: The Dolby Digital Plus, Dolby True HD, DTS HD High Resolution and
DTS HD Master Audio can only be passed by the 651/7518D over HDMI.
HDMI (High-Definition Multi-Media Interface) is a digital connection that
can carry both audio and video in one cable. Direct digital transfer of
video and support for various types of high definition video content make
this the best connection type for picture quality.
As HDMI can carry both digital audio and video, HDMI can be used to
connect to AV receivers that support this function for external decoding.
The 651/7518D supports two HDMI outputs, both are 3D TV compatible.
For normal use with a single TV or TV and AV Receiver use HDMI output
1 (Primary Output) as this benefits from the Marvell QDEO Video
processor, as shown below.
Set the Primary Output option in the setup menu to 'HDMI 1',
see later section.
0
Direct connection to a TV for HOM I 1
fj)\ Connection to a TV via an AV Receiver
\!:V for HDMI1.
0
000 000 00
0 0 0 0 0
0
AV receiver
HOM I cable
TV/ Monitor
with HOM I
input
~
0
HDMI cable
E3 Out
5I In
0
0
®
In E3
TV/ Monitor with HDMIInput
I
0
E:lln
13
I
8 Cambridge Audio
HDMI connection cont.
The secondary HDMI output of the 651/751BD can be used either to
allow connection of two display devices or to allow separate HDMI audio
and video outputs as shown in the two examples below.
Connecting to two displays using dual HOM I
Both outputs can pass 3D TV signals.
Set the Primary Output option in the setup menu to 'HDMI 2',
see later section.
This is necessary to allow HDMI 2 to output high resolution audio.
The 651/751BD features two HDMI outputs.
If is therefore possible to connect two TVs or a TV and Projector etc. you
should treat output 1 as the Primary highest quality output as it benefits
from the in-built Marvell QDeo scaler.
0
Secondary
TV/ Monitor
with HDMI
Input
Connection to a Primary TV/Monitor.
® Connection to a Secondary TV/Monitor.
In ES1
HDMI cable
,___:r.____
. ... ,
.
I
~~::::r.:: J
Primary
TV/Monitor
with HOM I
Input
e:;;:,
In
Connecting to a display and audio system using dual
HOM I
Set the Primary Output option in the setup menu to 'HDM11',
see later section.
If your AV Receiver cannot pass 3D TV HDMI signals it is possible to
configure the 651/751BD to output Video (inc 3D TV) via HDMI 1 directly
to a 3D compatible display and Audio via HDMI 2 directly to the AV
Receiver.
0 Connection to a TV/Monitor.
® Connection to an AV Receiver.
0
HDMI cable
B/u-ra y
3L:J
IIl
14
e:;;:,
In
00000000
0
0
0 0 0
0
~
AV Receiver with
HDMI1.3 Input.
azur
651/75180
Setting up the player
Accessing the Easy Setup Wizard
Select the best output resolution
When the player is turned on for the first time, an Easy Setup Wizard
screen will appear. This is a series of guided instructions designed to
configure the basic settings for the unit.
For the latest generation of 1080p, "Full HD" or "True HD' TV displays, the
best output resolution will naturally be 1080p. For all other digital
televisions this will likely be 720p or 1080i. These are general
recommendations that work for most users, but there can be exceptions.
Advanced users may want to try all supported resolutions and choose the
one that provides the best visual result.
Note: If the Easy Setup Wizard has previously been completed or
cancelled, it will no longer initiate when you turn on the unit. To access
Easy Setup Wizard again, press the Setup button on the remote control,
select Device Setup, then Reset Factory Default. Select "OK" to confirm
loading the factory default settings. Once the factory default settings are
loaded the Easy Setup Wizard will appear again.
To start the Easy Setup Wizard, please follow these steps:
1. Turn on the TV.
2. Turn on the player.
3. Switch the input selection on your TV so that the TV displays the signal
from the player. You should see the first step of the Easy Setup Wizard.
Easy Setup
The 651/751BD supports a special ·source Direct" output resolution on
its HDMI output. This resolution is recommended for use with external
video processors or high-end TVs with high quality scalers. In "Source
Direct" mode, the player works as a "transport". It decodes video from the
discs and then sends the raw video signal in its native resolution and
format, without extra processing, to the external video processor or TV.
The actual output resolution thus varies by content:
Source Direct Output Resolution
576i
480i
1080p 23.976Hz or 1080p 24Hz
1080i
Content
PAL DVD
NTSC DVD
Most Blu-ray Movies (film-source)
Most Blu-ray TV shows or Concerts
(video-source)
SACD and DVD-Audio
1080i
English
Step: 116
Deutsch
The Easy Setup Wizard will help you configure the
basic settings !Of this playar.
Easy Setup
FrancaiS
Espal\ol
Choose an OSO language before starting. The
language selected will be applied not only here but
Italiano
also in other OSO windows,menus etc.immediately.
Svenska
~~
Auto
Step:3J6
1080p
t080i
Nederlands
Choose the output resolution which best matches
your TV.
"'"'
~:::,~: ~e~::!~S:a:::~=Y~~~-:' nave
480pJ576p
rollbadl. to the previous output resolution
4801/5761
-Next
720p
Source Direct
The first step of the Easy Setup Wizard gives you the opportunity to skip
the entire wizard. If you are familiar with setting up audio/video
equipment and would like to fully customize the player settings using its
setup menu, you may use the ~ button to select the "Cancel" option,
then press the Enter button to exit the Easy Setup Wizard.
Use the .... ... buttons to select the language, then press Enter button to
continue with the Easy Setup Wizard.
Choose the primary video output
The player can output video through its HDMI and component output
terminals. Composite video output is always available but not
recommended. By setting the "Primary Video Output" option, the player
can optimize video output of the selected terminal. The choices are
"HDMI1", "HDMI2" and "Analog". If you connect the player to the TV using
an HDMI cable, please select "HDMI 1" or "HDMI 2" correspondingly. If
you connect the player to the TV using component video cables, please
select 'Analog•.
HDMI1
HOMl2
Better perfonnance will be l)fOvided over an HOMI
connection.
-Next
Depending on your selection of "Primary Video Output", the available
output resolution selections will differ. For the HDMI1 and HDMI2 output,
the following output resolutions are available:
Auto, 1080p, 1080i, 720p, 480p/576p, 480ij576i, and Source Direct. If
"Auto" is selected, the player will determine its output resolution based on
the best signal resolution that the TV can display.
For the Analog (component) output, the following output resolutions are
available: 1080p, 1080i, 720p, 480p/576p and 480i/576i.
Note: 1080p only applies to HDMI output, if it is selected for component
video outputs, it will automatically be down-scaled to 1080i. Please refer
to the specifications of your TV to find the best resolution to use.
Easy Setup
~ Step:316
Easy Setup
Choose the primary video output that you use
1m PreVious
-~
...........,
........,
........,
Ch • •
••
•• "•!
Cha
15
"''
'
Analog
-Next
Note: The best performance will be provided over the HDMI connection.
Between the two HDMI outputs, HDMI 1 should be given priority for use
since it benefits from the superior Marvell QDEO video processing
solution.
To make your selection, use the ... ... buttons to highlight the choice, and
then press the Enter button to go to the next
Auto
l
•
•••
"
•
'·
11
~.
•
YO'
.'"'
61
Direct
1m Previous
-No~
Press the ...... buttons to select the desired output resolution, then press
the Enter button. The player will apply the selected output resolution and
ask you to confirm the selection. If your TV supports the selected
resolution, you will see a dialog box with a countdown clock. Use the ~
button to highlight the "OK" option and press the Enter button to save the
resolution setting. If your TV does not support the selected resolution,
you may see a black screen or an error message. In this case please wait
for 15 seconds and the Easy Setup screen will reappear. Select a different
resolution that your TV can support.
15
I
8
Cambridge Audio
Setting up the player cont.
Note:
• In case you are not able to get a picture using the HDMI or component
output, please connect the player to the TV using the composite video
output, and then use the Setup Menu to adjust the player settings.
• Video up-conversion over the component output is only available for
unencrypted discs such as home video and consumer-created
contents. Most commercially pressed DVD discs are CSS-encrypted and
will be limited to 480ij480p resolution. This restriction applies to the
component output only. The HDMI output is protected with HDCP and
has no such restriction .
Select the audio setting
The Blu-ray disc format brings not only high resolution video, but also high
bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High
Resolution and DTS-HD Master Audio. Blu-ray Discs may also include
additional audio features such as menu click sound and Secondary Audio
Program (SAP - audio associated with the secondary video in Picture-inPicture mode). Depending on the user preferences and other audio/video
equipment connected to the player, the audio settings need to be
adjusted to achieve the best result. The Easy Setup Wizard offers two
basic selections to get you started.
Determine the display aspect ratio
Use to select the screen format to fit your TV screen.
4:3 Letterbox- Alternatively you can select
this screen when connected to a 4:3 TV
set. The full widescreen picture is
displayed on the screen with black strips
on the top and bottom of the screen.
Easy Setup
,_•••••••~
............
Step: 516
Select the audio setting.
Compatible
• Compatible: For televisions and receiv8f11 with
HOMI 1.1/1.2 orOpticaVCoaxlal connections
• Advanced: For receivers With HOMI 1.3 or higher
version only. Secondary audio program is turned
off by default.
Advonced
Audio settings can be further cu stomized in the
4:3 PanScan -You can select this screen
when connected to a 4:3 TV set. The
widescreen picture will display on the full
screen, but some parts of the video picture
will be cut off automatically.
setup IT'HilnU·
IIC:J
Previous
The "Compatible" setting configures audio output in a way that is generally
compatible with all types of equipment and content. If you connect the
player to a television directly, or to a receiver with an HDMI 1.1/1.2 or
opticaljcoaxial input, selecting the "Compatible" setting is recommended.
When menu click sound and Secondary Audio Program are presented in
the content, those will be mixed into the audio output.
16:9 Wide - Select this screen when
connected to a 16:9 widescreen TV set.
The full picture will now normally be
displayed with no picture cropping (unless
the movie itself has black bars recorded
into the video).
16:9 Wide/ Auto - 16:9 (widescreen) as well as 4:3 sources will be
displayed in their native aspect ratio. Please note that in this mode 4 :3
sources will be displayed with black borders on both sides to maintain
the correct 4:3 aspect ratio.
The "Advanced" setting configures audio output to send the original main
audio content to a connected receiver for decoding and reproducing. It
requires a receiver capable of decoding all high bit rate audio formats. If
you connect the player to a receiver supporting HDMI 1.3 and high bit
rate audio formats (such as our 650R AV Receiver), selecting the
"Advanced " setting is recommended. Menu click sound and Secondary
Audio Program are turned off by default to preserve the original quality of
the main audio content.
Press the .... "' buttons buttons to select one of the audio setting choices,
and then press the Enter button. The two basic audio setting choices may
not cover all situations. You can further customize the audio settings
using the player's Setup Menu.
Note: If you are using a plasma or widescreen CRT display you will want
to avoid leaving black bars on the screen for any length of time as you may
encounter temporary "burn-in" where the display retains memory of the
"used" part of screen and the unused (black bar) portions are clearly
defined on the screen during subsequent viewing sessions. The "16:9
Wide" mode is the best choice for these types of displays.
Complete the Easy Setup Wizard
Press the .... "' buttons to select the proper aspect ratio for your TV, then
press the Enter button.
Once you have selected the audio setting, the initial Easy Setup Wizard is
completed .
Easy Setup
Easy Setup
~Step: 416
V
step: 6/6
Choose the desired Aspect Ratio for your TV.
4:3 lettertlOK
Euy Setup Wizard completed .
• 4:3 Letterbox: FOf 4:3 TV. Wide SCI'Hn oontent
will be displayed In a letterboK.
4:3 Pan & Scan
PressltleEnter button toexlt
• 4:3 Pan & Scan: For 4:3 TV. Wide saeen
16:9 Wide
content may be aopped on the sides
• 16 :9 Wide: For 16:9 TV.
• 16:9 Wide/Auto: For 16:9 TV. 4:3 content Will be
16:9 WideiAuto
displayed withside borders .
11m Previous
- Next
lim Previous
- F l nlah
Press the Enter button to close the Easy Setup Wizard . Your player is now
ready for use. You will see a background screen with a Cambridge Audio
and Blu-ray Disc logo. Please follow the rest of the user manual for basic
and advanced operations.
16
azur
651/75180
Operating instructions
Getting started
Pause and frame by frame
Turn on the power of the 651/75180, TV, amplifier/AV receiver and any
other components which are connected to the 651/75180. Make sure
the TV and the audio receiver are set to the correct input channel.
1. During playback, press the ~ / II button to temporarily pause the
program. In this mode, a Pause icon will appear on the TV screen.
1. Press the Open/Close button to open the disc tray.
2. While a DVD or Blu-ray Disc is paused, press the
reverse or advance the video frame-by-frame.
2. Place the disc on the tray, label side facing up.
3 . Press the
3. The player will read the disc information and starts playback.
4. Depending on the content of the disc, a menu or navigation screen
may appear. Please use the ( ....... ~ ~ ) navigation and Enter button to
select the content to play.
~ / II
~
or
~
button to
button to resume normal playback.
Repeat
Note: The Repeat function is available only during playback.
5 . To stop playback, press the • button.
Press and hold the A-S/ Repeat button to access Repeat function. When
pressed for a few seconds, the Repeat function will cycle as follows:
6. To turn off the player, press the Standby/ On button.
DVD and DVD-Audio- Repeat Chapter, Repeat Title, Repeat All, Repeat Off.
Note:
Blu-ray Disc - Repeat Chapter, Repeat Tit le, Repeat Off.
• During DVD and some Blu-ray Disc playback, pressing the • button for
the first time brings the player to a pre-stop mode. You can resume
playback from the stopped point by pressing the ~ / II button. This prestop mode allows you to change the player settings and then resume
playback. To completely stop playback, press the • button twice.
CD and SACD - Repeat One, Repeat All, Repeat Off.
• Certain Blu-ray Discs with 80-Java technology do not support the prestop mode. Pressing the • button during playback of such discs will
completely stop the disc. Pressing the ~ / II button once the disc is
stopped will restart it from the very beginning.
• This unit featured an environmentally friendly low power (1W) standby
circuit. If it is not to be used for a long time, unplug it from the
household AC outlet.
• Do not put anything except a BD/ DVD/ CD sized disc into the tray,
foreign objects may damage the mechanism.
• Do not force the tray by hand during the opening and closing
operations.
• To avoid dirt and dust entering the mechanism, keep the disc tray
closed when not in use.
Note: The repeat chapter/title setting will be cleared when moving to other
chapter or title. Certain Blu-ray discs may not allow the Repeat function.
A-8 Repeat
1. Press the A-8 button at your desired starting point. 'A" appears briefly
on the TV screen.
2 . Press the A-8 button at your desired end point. "A-8" appears briefly
on the TV screen, and the repeat sequence begins.
3. To exit the sequence, press the A-8 button.
Note:
• The A-8 repeat section can only be set within the current t itle (for 80/ DVD
video) or current track (for 80/DVD audio, Video CD and Audio CD).
• A-8 repeat playback is not available with some scenes on 80/ DVD.
• A-8 repeat playback does not function during title, chapter, track or all
repeat playback.
• If the disc is seriously scratched or too dirty, the player may not be able
to read it or play it.
On-Screen Display
• Never load more than one disc into the disc tray at one time.
1. During the playback of a BD/ DVD disc, press the Info button on the
remote control to show status information; For CD and SACD, the status
information is shown automatically.
Fast Forward/Rewind search
Press repeatedly to cycle between 1X, 2X, 3 X, 4X and 5X playback speed
Press
playback.
normal
back to
and
sound)
(without
~ button for backwards playback options, or the ~~ button for forwards
playback.
Note:
• Certain Blu-ray discs utilising the 80-Java technology may have thei r
own fast forwarding and reversing control. The actual speed varies by
disc, and a progress scale may be displayed by the disc.
2. While the status information is shown, press the ... .... buttons to scroll
through several display formats. The playback time information displayed
on the front panel changes together with the on-screen display.
3. Press the Info button again to hide the on-screen display. The playback time
information display on the front panel will remain in the selected format.
In addition to the playback time, the on-screen display may also contain
the following information about the content currently playing:
Playback status - an icon indicating play, pause, and fast forward/reverse status.
Bit rate meter- an indication of the bit rate ofthe audio and video stream.
Skip playback
~
Current and total title numbers (DVD and Blu-ray Discs), title chapters
(DVD and Blu-ray Discs) and total tracks (CD and SACD).
Press~
Audio information -current and totally available number of audio t racks,
language, format, and channels.
once to skip forward by one track/ chapter on the disc. Press
and hold to skip forwards through several tracks.
1. Press
2.
once to skip backward by one track/chapter on the disc. Press
and hold to skip backwards through several tracks.
Go To
Subtitle information - current and totally available number of subtitle
tracks and language.
Video format information - encoding type, frame rate and original aspect ratio.
Press the Go To button on the remote once to access Time Search and
enter the required time from the start of the disc as H:MM:SS (Hours,
Minutes, Seconds) using the numerical keys or the ( ....... ~ ~ )
navigational buttons. Press twice to access Chapter Time Selection and
enter the required time from the start of the chapter. Press three times
to access the Display information.
Slow
When playing a 80/ DVD, press the II button to pause playback and then
press the ~ or ~ button to cycle round the various speeds of slow motion
(1/16, 1/8, 1/ 4 and 1/ 2), forwards and backwards and back to normal
speed. To exit playback, press the ~ / II button.
Note: Certain Blu-ray discs ut ilising the 80-Java technology may not
support slow playback.
17
I
8 Cambridge Audio
Operating instructions cont.
Audio language (soundtrack) selection
DVD disc menu
1. To select the audio language, press and hold the Audio/Subtitle button
on the remote control during playback.
1. Some DVD discs contain title menu or chapter menu functions.
2. Repeatedly pressing the Audio/Subtitle button cycles through all
available audio soundtracks on the disc.
Note: The availability of languages and audio soundtracks varies by disc.
Some BD/DVD-Audio discs allow audio track selection with the Audio
button, while others require the user to select from the audio setup menu
of the disc. When playing a SACD with both multi-channel and stereo
contents, the Audio button can be used to switch between the two
formats.
Subtitle selection
1. When playing a DVD, Blu-ray disc or other video programs recorded
with subtitles, press and hold the Audio/Subtitle button on the remote
control to select the desired subtitle.
2. Holding down the Audio/Subtitle button will cycle through all available
subtitles.
3 . To turn off subtitles, hold down the Audio/Subtitle button until the
subtitle is turned off.
Angle selection
1. When playing a DVD or Blu-ray Disc, an angle mark will be displayed on
the screen when the player detects scenes recorded with multiple
possible angles.
liij The angle mark is also shown on the front panel display.
2 . Press and hold the Angle/Zoom button on the remote control to select
the desired playing angle.
3. To resume normal playback, hold the Angle/Zoom button until the
default angle is displayed.
Note: This function is available only when the discs are recorded with
multiple angles. The Angle mark display shows when an alternative angle
is available. The Angle mark display on the screen can be turned off using
the Setup Menu of the player.
2. During playback, press the Top Menu button to return to the disc title
menu. Press the Pop-Up Menu button to display the chapter menu.
Depending on the disc, one or both menus may not exist.
3. Navigate the menu using the ( ... • ~ ~ ) Navigation buttons, and then
press the Enter button to make the selection.
4. Press the Return button to return to the previous menu. The return
location varies by disc.
Memory and automatic resume
The player automatically remembers the current position for a disc when
playback is interrupted. Operations such as Open/Eject or turning Power
off will cause the player to save the current playing position for that disc.
The position is memorised even after turning off the unit or changing the
disc.
When the next time the same disc is played back, the player will recognize
the saved playing position. Playback will automatically resume from this
saved position. However if you wish to cancel the automatic resume and
start playback from the beginning, you may press the • button when
prompted.
The player can remember playback position for up to five discs. When the
sixth disc is memorised, the oldest one is replaced.
Note: Some Blu-ray discs do not support resuming and will always play
from the beginning.
BONUS VIEWTM
Picture-in-Picture and Secondary Audio
Certain Blu-ray discs contain secondary video (Picture-in-Picture/PIP) and
secondary audio. This feature is often called BONUSVIEW. When such a
disc is played, a Picture-in-Picture mark (PIP Mark) and a Secondary Audio
Program Mark (SAP Mark) may be displayed on the screen to alert you to
the availability of the secondary audio/video content.
Zoom
The disc menu usually features interactive controls to turn on/off the
Picture-in-Picture video and Secondary Audio Program. Please use those
controls to select the desired secondary audio/video content.
To change the zoom level, press and hold the Angle/Zoom button on the
remote control . Holding down the Angle/Zoom button will switch the zoom
level in the following sequence: 2x, 3x, 4x, 1/2, 1/3, 1/4 then back to
normal.
There is also a PIP button on the remote control. If the disc menu does
not offer interactive Picture-in-Picture controls, please use this button to
turn on; off Picture-in-Picture or select from multiple secondary video
programs.
The zoom level is reset to 1:1 when the disc is ejected, or when the player
is turned off.
Similarly there is a SAP button on the remote control. If the disc menu
does not offer interactive secondary audio controls, please use this
button to turn onjoff Secondary Audio Program or select from multiple
secondary audio tracks. Secondary Audio Programs are generally only
available when Picture-in-Picture is shown.
Note: The Zoom feature may not be available when certain DVD or Blu-ray
Discs are played because the disc author chooses to disable Zoom.
Blu-ray disc menu
Note:
1. Blu-ray discs usually contain a top menu and a pop-up menu. The top
menu normally appears at the beginning of the playback, after the
previews and copyright messages. The Pop-up Menu can be accessed
during playback without interruption.
• This function is available only when the discs are recorded with
secondary video and audio programs.
2. During playback, press the Pop-up Menu button to access the pop-up
menu. Press the Top Menu button to access the top menu.
3. Navigate the menu using the ( ... • ~ ~ ) Navigation buttons, and then
press the Enter button to make the selection.
• Discs may not always be played back according to the PIP and SAP
remote buttons. Certain discs can ignore or override the remote control
commands.
• The PIP and SAP Marks on the screen (which alert the user to the
presence of these functions on the disc) can be turned off using the
Setup Menu of the player.
4. Some menus make use of the colour buttons. You can select menu
functions by pressing the corresponding Colour button on the remote
control.
Some Blu-ray disc titles are released with the BD-Live feature. BD-Live
offers extra downloadable contents and additional online interactive
programs. The available BD-Live content varies by disc and studio, and
may include additional subtitles, commentaries, preview trailers, games,
and online chat. The player needs to be connected to the Internet in order
to play BD-Live contents.
18
azur
Depending on how the studios organise their BD-Live contents, some Blu-ray
discs may start downloading BD-Live content when playback starts; some
have a BD-Live selection on its main menu; some may show a prompt to ask
whether you would like to start downloading; and some may ask you to sign
up for a membership or a=unt. Please follow the instructions that come with
the disc to enjoy BD-Live contents.
Your Internet connection speed, the overall Internet traffic situation and
the capacity of the BD-Live content servers can all affect how fast SOLive content can be downloaded. If you encounter slow downloading or
intermittent playback, please play the disc without accessing the BD-Live
features, or try again at a different time.
When you use the BD-Live feature, the player or disc ID and your IP
(Internet Protocol) address may be sent to the content provider via the
Internet. Generally, no personally identifiable information is sent. However
technologies exist to match your IP address to a certain geographical area
or service provider. Your Internet service provider also has the knowledge
of who is using which IP address. If the BD-Live content provider requires
you to login using a membership or account, the content provider will
have access to your membership or account information. Please check
with your Internet service provider and the BD-Live content providers for
their privacy policy.
You can also choose to restrict BD-Live access using the player"s Setup Menu.
Output resolution
If you would like to change the output resolution, you may do so by
pressing the Res/TV Type button on the remote control:
1. Make sure the video cable is properly connected.
2. Turn on the TV. Make sure the correct input is selected.
3. Make sure that the player is turned on. Although the output resolution
can be changed •on the fly", it is recommended that you stop playback
and take out the disc before changing the output resolution. Press the
Res/TV Type button. A "Resolution Setting" menu appears on the TV
screen. In case the TV does not support the current resolution and you
cannot see the ' Resolution Setting" menu, the current resolution is
also displayed on the front panel.
4 . Use the .... ..,. buttons to select the new output resolution. Pressing
the ResjTV Type button cycles through the available output resolutions.
The new resolution is displayed on the front panel just in case you
cannot see the "Resolution Setting• menu (if it is incompatible with your
TV).
5. Press the Enter button to apply the selected output resolution. Or, if
you do not want to change the output resolution, press the .. button.
The following output resolutions are available:
PAL output via HDMI1 or 2- Auto, 1080p, 1080i, 720p, 576p, 576i, Source
Direct.
NTSC output via HDMI1 or 2 - Auto, 1080p, 1080i, 720p, 480p, 480i, Source
Direct.
PAL output via Analog (component) - 1080p*, 1080i, 720p, 576p, 576i.
NTSC output via Analog (component) - 1080p*, 1080i, 720p, 480p,
480i.
* When 1080p Is selected with Analog output selected as the primary
video output, HDMI output resolution will be 1080p and component
output resolution will be 10801.
651/7 5180
TV system selection
The 651/75180 can be set to output all video as PAL or NTSC or output
the video in the same format it was recorded in (Multi). Some TVs only
support PAL or NTSC and not both so forcing the output type to one or the
other can be useful.
Press and hold the ResjTV Type button on the remote control to cycle the
video output to PAL, NTSC or "Multi" system. The TV screen displays the
selected system name.
Some points to keep in mind:
• When the video output is set to PAL or NTSC, the player will convert the
disc content if different to the selected system.
• When the video output is set to "Multi", the player will not perform
system conversion and will output the video in its native format on the
disc. The "Multi' mode should only be used if your TV supports both
NTSC and PAL systems.
• Some TV sets only support one of the PAL or NTSC systems. If the wrong
output is selected, the TV may not display a picture. In this case keep
holding the Res/TV Type button until a supported system is selected.
• The output system selected with the ResjTV Type button will be
remembered when the player is turned off. The output system selection
can also be done by setting the "TV System" item in the "Video Setup"
section of the player's Setup Menu.
Viewing pictures on DVD-Audio discs
Some DVD-Audio discs contain static pictures, such as photos of the band
or narration of the album. When a DVD-Audio track is playing, you may use
the Page .... and Page ..,. buttons to select the picture.
Note: Availability of static pictures depends on the DVD-Audio disc.
Pure Audio mode
You can enjoy higher quality audio by turning off the video processing and
output. The Pure Audio mode reduces any potential interference between
the video and audio signals.
1. Press the Pure Audio button on the remote control to turn off video
and enter Pure Audio mode. Video output will be turned off.
2. Press the Pure Audio button again to resume video and cancel Pure
Audio mode.
Note:
• Pure Audio mode is automatically cancelled when the unit is switched
off or when playback is stopped.
• Since HDMI carries audio together with video, the HDMI output cannot
be completely turned off. A black screen (inactive video but sync is still
present) is transmitted instead to minimize any potential interference.
Shuffle
When playing a CD or SACD, press the Blue button on the remote control
to activate the Shuffle and Random modes. Each press of the Blue button
switches the playback mode in the following sequence: Shuffle , Random
and Normal.
Note:
• Some TV sets do not support one more output resolutions (particularly
1080p). If an incompatible output resolution is selected, you will get a
blank screen or an error message. In this case please select an output
resolution that is supported by the TV.
• In case you are not able to get a picture using the HDMI or component
output, please connect the player to the TV using the composite video
output, then use the Setup menu to adjust the player settings.
• Video up-conversion over the component output is only available for
unencrypted discs such as home video and consumer-creat ed
contents. Most commercially pressed DVD discs are CSS-encrypted and
will be limited to 480i/480p resolution. This restriction applies to the
component output only. The HDMI output is protected with HDCP and
has no such restriction.
11
I
ft Cambridge Audio
Other media playback
As well as normal CO's, SACD's, DVD's and BD's the 651/751BD can play
some music, movies and photo files either from optical datadiscs (such
as CD-R, DVD-R etc.) or external memory such as USB flash-drives/thumbdrives or e-Sata hard-drives.
Connecting a USB or an e-Sata Drive
The 651/751BD is equipped with two USB 2.0 ports, one on the front of
the unit and the other on the back, and also an e-Sata port at the back.
You may use either USB port to plug in a USB drive or use the e-Sata port
with an e-Sata drive loaded with digital music, movies and photo files.
Playing music files
To play digital music files stored on an optical disc or external drive, select
"Music" f rom the Home Menu. A file browser will appear to assist you in
navigating the files and folders.
The first step is to select the "Data Disc" or external device that contains
the music files. The player will take a moment to read the disc and list the
folders and music files.
Music
The USB ports are rated to provide a maximum of 5V, 1A power to the
attached device. This is usually sufficient to bus power (i.e. self power)
USB flash drives and flash memory card readers, but may not be sufficient
for USB hard disks.
-l,t. DataOioc
...;..USB1
ft HDD1
To use the e-Sata port, an external power supply is needed to power up
the e-Sata drive. Note that the e-Sata port does not support "hotplugging" To avoid damaging your e-Sata drive always plug-in/ unplug
the e-Sata drive when the 651/751BD is turned off
Note:
C'LJ-
• This unit supports Mass Storage Class Bulk Transport devices only.
Most USB thumbs drives, portable hard disk drives and card readers
conform to this device class. Other devices such as MP3 players, digital
cameras, and mobile phones that include their own memory
management may not be compatible.
• Supported USB drives must be formatted with the FAT (File Allocation
Table), FAT32 or NTFS (New Technology File System) file system.
• In some cases, an incompatible device may cause the player to stop
responding. If this occurs simply turn off the power, remove the device,
and turn the player back on.
USB1
.(.J01 High
All Music
J?
02 You're Beautiful
t;l
03Wisemen
,() 04 Goodbye My Lover
Playlist
, ...-~ o
BrCM'Ser
-·....
Now Playing
.0 05 Tears & Rain
..rJ
06 Out Of My Mind
..rJ 07 So Long Jimmy
• The player accesses the USB drive in read-only mode. In order to
minimize the risk of data corruption, it is recommended that you only
unplug the USB device when playback has completely stopped.
• DO NOT attempt to plug In a USB drive Into the e-Sata port, or plug In
an e-Sata drive into the USB port, as this could damage both the drive
and the port.
In the music browser, you can perform the following operations:
Press the ........ buttons or Page ........ buttons to move the cursor and
select music files.
· The Home Menu
When a drive or an optical disc stored with media files is inserted, the
player presents a "Home menu" to assist you in navigating and playing
the files. You can also bring up the Home menu with the G button on the
remote control. The Home menu is the starting point for accessing media
files.
111111
II
8 Cambridge Audio
Depending on what type of media files that you intend to play, you can
choose from "Music", "Movie" and "Photo" categories. The ·setup Menu"
selection will bring you to the player's Setup Menu just like pressing the
Setup button on the remote control.
Two further menu items are provided for future features.
The Internet menu may be used in the future for online streaming
audio/video services. The My Network menu may allow the 651/ 751BD
to access content over a network via UPnP AV from suitable servers.
Both features are experimental works in progress and not guaranteed
parts of the 651j751BDs functionality. See the 651/ 751BD support page
at www.cambridgeaudio.com for the latest details on these menus and
any software updates available from Cambridge Audio.
Note streaming services are usually regional so any services that may be
made available will usually vary from country to country also.
20
Note: The 651j751BD can play WMA and MP3 files only. The 651j751BD
cannot play AAC files.
When a music file is highlighted by the cursor, press the Enter or
~I II button to start playback.
Press the Green colour button to add the currently highlighted music file
to the Playlist. A Green check mark will appear in front of the file name,
and the Playlist count in the lower left corner of the screen will increase
by one.
Press the 4 button to move the cursor to the selection menu in the lower
left corner of the screen. This menu contains the following choices:
All Music - List all music files in a flat view without any directory structure.
Playlist - List only music files added to the Playlist.
Browser - List folders and music files according to the original directory
structure on the disc or USB drive.
Now Playing- Show the status of the currently playing music file. Press
the ~ button to move the cursor back to the file listing.
If a music file starts playing and there is no other user operation, the "Now
Playing" screen will appearatter a few seconds. You can also get to this
screen using the "Now Playing" menu. This screen can show the following
information:
Playback status - ~ 1 II , •
Playback mode - Shuffle, Random, Repeat One, Repeat All
Playback progress - Track and time
Other embedded information - If the music file contains supported
album art image and tags, those will be displayed.
651/75 180
azur
Viewing photo files
To view digital photo files stored on an optical disc or external drive, select
"Photo" from the Home Menu. A file browser will appear to assist you in
navigate the files and folders.
. .,_ _
01 Hlgh.mp3
~
.:....__
01:50/04.03
1 / 10
Tile:
Photo
High
James Bioot
AIO...-.:Badc ToBedlam
Artis~ :
o.nr.: Pop
"'t-
Data Disc:
~
USB1
Q!!l HOD1
The following operations are available while the "Now Playing• screen is
shown:
Normal playback control - • I II , •, ~/ ... ~ , and .. .
Special playback mode - Repeat and Shuffle/Random (Blue colour
button).
Return to the Browser without stopping the music - Return
Stop playback and return to the Browser - Press • twice.
--
The first step is to select the "Data Disc" or USB device that contains the
photo files. The player will take a moment to read the disc and list the
folders and photo files.
In the photo browser, you can perform the following operations:
Playing movie files
To play movie files stored on an optical disc or external drive, select
"Movie" from the Home Menu. A file browser will appear to assist you in
navigating the files and folders.
The first step is to select the "Data Disc" or external device that contains
the movie files. The player will take a moment to read the disc and list the
folders and movie files.
• Press the .... 1 ...- or Page .... 1 ...- buttons to move the cursor and select
photo files.
• When a photo file is highlighted by the cursor, press the Enter or • 1 II
button to start playback in a full screen slideshow fashion.
....
,_ Photo
. . .,
USBt
...
0.27M
~1024>1:158
o..n-.: 2007*17
Movie
•
~ Oata Oisc
.....;. U$81
mJH001
--
-
Backgrounds
c
Beaches
r- Firewortts
WSunset01
w s unset02
WSunset 03
--
W Sunset04
The following operations are available during the photo slideshow:
Show the help screen - Display
In the movie browser, you can perform the following operations:
1. Press the .... 1 ...- or Page .... 1 ...- buttons to move the cursor and select
movie files.
Normal playback control - • 1 11 and
Adjust slideshow speed -
~
~
...
and ..
Zoom - Zoom. Once in a zoom mode the .... ...can be used to pan the photo.
~
• navigational buttons
Reflect - .... button.
Movie
... .
US81
Mirror- ...- button .
Rotate left (counterclockwise) -
t:J TVSeries
,- KidsMovies
t-
HolidayVIdeo
~
Night In Town
Zoo
~
Dance Lesson 01
button
Repeat - Repeat button
41 Summer Play '09
,
~
Rotate right (clockwise) - • button
--
2. When a movie file is highlighted by the cursor, press the Enter or •
button to start playback.
Show photos in "Digest" mode - Red colour button. The "Digest" mode
shows the nine photo thumbnails in a screen to make visual navigation
easy.
Show EXIF Information - Green colour button
1 II
Once a movie file starts playing, the normal playback control functions
are available. To stop the movie and return to the file browser, press STOP
twice. You can also press the Q button at any time to get back to the
Home Menu.
Play in random/shuffle sequence - Blue colour button
Change slideshow transition effect- Yellow colour button.
Adding background music
You can add background music to the photo slideshow. To do so, you will
need to prepare some digital music files. The music files can be stored on
the same disk as the photos, or on a different drive. Start music playback
first by selecting "Music" from the home menu. Once the music is playing,
press the Q button to get back to the home menu, and start the photo
slideshow by selecting "Photo" in the usual manner.
21
I
8
Cambridge Audio
Setup Menu
eject the disc before trying to change these setup items. If you still cannot
access the setup item, please check for configuration conflicts and
consistency. For example, if "Video Setup > 1080p24 Output" is set to
"Off", the "DVD 24p conversion" menu items "Auto" and •source Direct"
will be grayed-out. Setting "1080p24 Output• to "On' will enable the "DVD
24p conversion" menu items "Auto" and "Source Direct" to be set.
.........
1. Press the Setup button on the remote control, and the TV screen
displays the following:
*Setup Menu
To access the player's Setup Menu simply press the Setup button on the
remote control. Since some Setup Menu options can become
inaccessible when the player is playing a disc, it is recommended that
you operate the Setup Menu when playback is fully stopped or when there
is no disc in the player.
The Setup Menu presents many setup and configuration options. For
most users, the default configuration will be sufficient and will often not
require changes to the settings.
However if you wish to configure the player to perfectly match your home
theatre settings and viewing preferences, please refer to the following
sections for details about each configuration option.
Using the Setup Menu System
When performing menu adjustments, we will use the following
terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection
SACDPriorlty
Video Setup
DVO-Audio Mode
Audio Format Setup
Audio Processing
I
PBC
Parental Control
Exit
Language
(~
Off
Audio Format Setup
Auto Play Mode
Audio Processing
Auto Resume
Device Setup
PBC
Network Setup
Parental Control
Exit
Language
2. Press the .... I ... buttons to select the section. There are six sections:
Playback Setup, Video Setup, Audio Format Setup, Audio Processing,
Device Setup, and Network Setup. Press the Enter button or the ~
button to enter the selected section.
3. Press the .... I ... buttons to select the setup item to be changed, and
press the Enter or ~ button to change the setting. When the scroll icon
is shown at the top or bottom of the Setup Menu, it indicates that there
are more menu items that can be accessed by scrolling with the .... I ...
buttons.
4. To select a value from the list of available settings, press the .... 1 ...
buttons and then press the Enter button to confirm. For example, to
select "On" for "Auto Play Mode", use the .... ; ... buttons to highlight
the "On" selection and press the Enter button.
Playbacl< Setup
SACD Priority
• Multi-Channel
Video Setup
OVD-Audio Mode
•DVD-Audlo
Audio Format Setup
Auto Play Mode
•On
Audio Processing
Auto Resume
Device Setup
PBC
Network Setup
Parental Control
Exit
language
'sini>P Exit
.....
Playback starts when the PLAY button is pressed
SE1\JP
Exk
Setup Menu Section is the uppermost Setup Menu level. With the
651/751BD there are six Setup Menu sections listed in the left column
of the Setup Menu screen. They are: Playback Setup, Video Setup, Audio
Format Setup, Audio Processing, Device Setup, and Network Setup.
Menu Item is the parameter to be adjusted which appears in the centre
column of the Setup Menu. Once you enter a Setup Menu Section, the list
of Menu Items and their current value are displayed in a box.
Selection is the actual numeric or descriptive element that represents
the change being made to the selected parameter. It is the item located
to the right of its corresponding Menu Item.
A scroll icon appears at the top or bottom of the menu when there are
more Menu Items or Selections than what can fit in a screen. You may use
the .... and ... buttons to scroll the display in order to access additional
items.
Note: It is possible that some setup items are greyed-out and
inaccessible. This can be caused by a disc still being played back or
interlocking with mutually exclusive setup items. Please stop playback or
22
• Multi-Channel
• DVO.Audio
Auto Resume
Device Setup
JJlgJr!J
eon
Auto Play Mode
Network Setup
1. .\
SACDPnority
DVD-Audio Mode
*Setup Menu
*Setup Menu
Playback Setup
Playback Setup
VIdeo Setup
5. To exit the Setup menu at any time, press the Setup button on the
remote control or select Exit from the Setup Menu sections.
The settings are permanently saved when the player is turned off using
either the front panel Standby/On button or the same button on the
remote control. If the AC power is interrupted before the player enters
standby status, the settings will not be saved.
azur
651/75 180
5. PBC - Play Back Control
Playback Setup
To enable/disable Play Back Control. Play Back Control is a primitive form
of disc menu. The options are:
On - If the disc contains Play Back Control, show the menu.
*Setup Menu
Off - Play back the contents by sequence.
Playback Setup
SAGO Priority
Ill Multi-Channel
Video Setup
DVD-Audio Mode
llil DVD-Audio
6. Parental Control
Audio Format Setup
Auto Play Mode
ooon
This is used to set parental control ratings in order to prevent minors from
watching inappropriate content This function does depend on the disc
being properly rated and encoded.
Audio Processing
Auto Resume
Device Setup
PBC
Network Setup
Parental Control
Exit
Language
won
Press the Enter button to bring up the rating selection menu.
Cl'loose which SACD layer to play
f SiTUP I Exit
To adjust the parental control settings, you must enter the current
parental control password. If you have not set a parental control password
yet, the default password is "0000'.
The parental control menu contains the following sub-items:
The ' Playback Setup" section is designed to configure playback
preferences for various contents. The setup items in this section are:
Menus
Settings
SACD Priority ................................... •• ••.... ..... Multi-Channel
Stereo
CD Mode
DVD-Audio Mode .................................. ........ DVD-Audio
DVD-Video
Auto Play Mode ..................................... ....... On
Off
Auto Resume ................................................ On
Off
PBC ...............................................................On
Off
Parental Controi ...........................................BD Ratings
(default password: "OOOO") ..............•..... ......DVD Ratings
Area Code
Change Password
Language .............................................. ........ Piayer Language
Disc Menu Language
Audio Language
Subtitle Language
BD Ratings- Press the .... 1,.. buttons to select the rating allowed for Blu-
ray Discs. "Off" means no ratings control and all discs are allowed to play.
Numbers 1 to 21 corresponds to the age limit. Discs encoded with an
age limit that is equal to or above the selected age will be allowed, and
any rating below the selected age will be blocked.
DVD Ratings - Press the .... 1.... buttons to select the rating to allow for
DVD. The available ratings are Kid, G, PG, PG-13, PGR, R, NC17, Adult
and Off. The selected rating and below will be allowed, and any rating
above will be blocked. If "Off" is selected, all discs are allowed to play.
Area Code - Some Blu-ray Discs may have different parental control
ratings for different geographical areas. At this time the player only
supports the parental control ratings used in the United Kingdom .
Change Password -To change the parental control password, enter a 4digit number as the new password. Enter the new password again to
confirm . If the two entries are matching, the new password replaces the
old parental control password.
7.Language
This is used to configure language preferences:
Player Language - To choose the display language for the player's
Setup Menu and onscreen display.
Disc Menu Language - To choose the preferred language for displaying
To select which audio layer to play by default for SACD (Super Audio CD)
discs which often have multiple soundtracks. The options are:
DVD and Blu-ray Disc menus. If a disc menu of the selected language is
available, that menu will be shown instead of the default disc menu.
Audio Language -To choose the preferred audio language for DVD and
Blu-ray Discs. If an audio track of the selected language is available on
the disc, the Audio track will be played back.
Multi-Channel - Play the DSD multi-channel surround audio layer.
Subtitle language -To choose the preferred subtitle language for DVD.
1. SACD Priority
Stereo - Play the 2-channel DSD stereo audio layer.
CD Mode - Play the 2 channel PCM CD layer of a hybrid SACD disc.
If a subtitle of the selected language is available on the disc, it will be
displayed. When "Auto" is selected, the subtitle display is decided by the
disc.
Note: If your preferred language is not listed in the Audio, Subtitle or
2. DVD-Audio Mode
To select which portion of a DVD-Audio disc to play. The options are:
Disc Menu options, select "Other" and enter the Language Code found
on the later section of this manual.
DVD-Audlo - Play the DVD-Audio portion of the disc with high-resolution
audio.
DVD-Video - Play the DVD-Video portion of the disc with Dolby Digital or
DTS audio.
3. Auto Play Mode (onjoff)
To select whether the player willl start playing an audio CD or SACD
automatically. When auto 'play mode is turn on, these discs will start
playing upon insertion into the player. When auto play mode is turned off,
the player will wait for the user to start playback by pressing the PLAY
button.
4. Auto Resume (on/off)
To select whether the disc playback shall start from the previously saved
point or not This setting applies to CD, SACD, DVD and certain Blu-ray
disc. When auto resume is turned on, the playback automatically starts
from the previously saved point when auto resume is turned off ,the
playback starts from the beginning.
23
I
8
Cambridge Audio
Setup menu continued
Video Setup
*Setup Menu
Playback Setup
Picture Adjustment
Video Setup
Primary Output
Audio Formal Setup
30 Mode
liif Auto
Audio Processing
3D TV Size
.. 46
IIi HDMI1
Device Setup
TV Aspect Ratio
•
Network Setup
TV System
111 NTSC
Ex~
Output Resolution
16:9Wide
111 Auto
"''Il"
Adjust picture control paremetenl
SEllJP i Exit
The "Video Setup" section of the Setup Menu system allows you to
configure various video output options. The menu items in this section
are:
Menus
Settings
Display Options ............................................Subtitle Shift
-5 to +5
OSD Postion
0-5
OSD Mode
Normal
Silent
Remaining
Angle Mark
On
Off
PIP Mark
On
Off
SAP Mark
On
Off
Screen Saver
On
Off
Energy Saver
1. Picture Adjustment
Picture Adjustment ...................................... HDMI 1
HDMI 2 & Analog
This is used to adjust picture control parameters. The 651/ 751BD
provides a wide array of picture controls. Please refer to the "Picture
Adjustment" section of this manual for details of each control.
Primary Output ............................................. HDMI1
HDMI2
Analog
To select the primary video output method. The options are:
3D Mode ............................ ...........................Auto
Forced
Off
3D TV Size ....................................................46
TV Aspect Ratio .......................................... ..4:3 Letterbox
4:3 Pan & Scan
16:9Wide
16:9 Wide/ Auto
TV System ..................................................... PAL (default)
NTSC
Multi-system
Output Resolution .................... ....................Auto
1080p
1080i
720p
480p/576p
480ij576i
Source Direct
1080p24 Output.. ........................................ Auto (default)
On
Off
HDMI Option .................................................Colour Space (1&2)
Auto
RGB Video Level
RGB PC Level
YCbCr 4:4:4
YCbCr4:2:2
Deep Colour (1&2)
36 Bits
30 Bits (Dithered)
30 Bits
Off (Dithered)
Off (default)
Demo Mode
On
Off (default)
Video Only
Yes
No (default)
24
2. Primary Output
HDMI1- Use HDMI1 as the primary video output port. This setting will
ensure that the HDMI 1 output gets the best possible picture quality. The
dedicated Marvell QDEO video processor will be used unless "Source
Direct" for output resolution is selected, in which case the QDEO DE2750
video processor is bypassed. Component and composite video output
may not be available or may be limited to a lower resolution based on
content source limitations.
HDMI 2 - Use HDMI 2 as the primary video output port. Similar to "HDMI
1", this setting ensures that the HDMI 2 output gets the best possible
picture quality, except that it utilizes the video decoder in the Mediatek
Chipset to perform necessary video processing, not the QDEO video
processor.
Analog - Use component video as the primary video output port. This
setting will ensure that the component output is always available and
displays proper video signals. The video decoder in the player performs
any necessary format conversion , and the QDEO video processor is
completely bypassed.
Note: Copyright control mechanisms encoded on the disc may limit the
output resolution of the component video output. For DVD, if CSS
encryption is in use the output resolution is limited to no more than
480p/576p; for Blu-ray Discs, the output resolution is limited to no more
than 1080i, and could be lower if the disc contains an Image Constraint
Token.
3. 3D Mode
To choose the video output mode for available 3D content at the HDMI
output ports. The options are:
Auto - Output 3D if supported both by the disc content and the display.
The player automatically checks for the existence of 3D content on the
disc and the 3D compatibility of the TV or projector. If both are qualified,
the player sends 3D video from its HDMI output terminals, otherwise only
2D video is sent out. Active shutter 3D-compatible glasses are required
compatible with your TV.
Forced - Always output 3D video format for 3D Blu-ray discs. You might
experience a black screen (no video output) if your TV is not 3D
compatible.
Off - Always output 2D video format, even when 3D video exists on the
disc. This can guarantee the video quality in case that your TV is not 3D
compatible, or some necessary part (such as the 3D glasses) is missing.
azur
651/7518 0
4. 3D TV Size
9. HDMI Options
To enter the diagonal screen size of your HDTV. This option applies to 3D
mode, to facilitate the player adjusts the 3D image for better visual
quality.
To configure video options that apply only to the HDMI output. This item
contains a sub-menu of the Video Setup menu allowing configuration of
some video settings that are unique to the HDMI outputs. To enter this
sub-menu. select "HDMI Options" from the Video Setup menu.
The diagonal size of your TV screen, by default it is 46 inches.
5. TV Aspect Ratio
To set the aspect ratio of the player's output image. The options are:
4:3 Letterbox - Choose this when the display is standard 4:3. A
widescreen image is displayed in "letterbox" format with black borders on
top and bottom.
4:3 Pan & Scan - Choose this when the display is standard 4:3. A
widescreen image will be stretched.
16:9 Wide - Choose this when the display is widescreen 16:9. 16:9
materials will be displayed in its native aspect ratio, and 4:3 materials
will be stretched horizontally.
16:9 Wide/Auto - Choose this when the display is widescreen 16:9. 16:9
materials will be displayed in its native aspect ratio, and 4:3 materials
will be displayed with black borders on both sides in order to maintain
the original 4:3 aspect ratio.
6. TV System
To choose the output video standard (PAL/NTSC) to match your TV. The
options are:
PAL - When playing PAL-encoded discs, no system conversion is
performed. NTSC-encoded contents are converted to PAL output. Blu-ray
discs encoded with 24Hz frame rate are converted to 50Hz frame rate if
neither 1080p24 Output nor Source Direct output resolution is enabled.
To exit this sub-menu, press the ~ button or the ~ key. Options are
present for HDMI1 (using the Marvell QDEO scaler) and HDMI2 (using
the scaler built into the Mediatek chipset).
The following HDMI options are available:
Colour Space (HDMI 1) - Used select the colour space for the HDMI 1
output.
The Marvell QDEO scaler can perform various conversions for this output.
The available options are:
Auto (Recommended) - The player checks with the display device to
automatically determine what colour spaces it can support and uses
those. Usually avoids extra colour space conversion.
RGB Video Level - Forces the HDMI output to use RGB colour space
and normal signal range suitable for TV type displays.
RGB PC Level - Forces the HDMI output to use RGB colour space and
expands the signal range that to suitable for personal computer (PC)
type displays.
Mostly used for TVs with DVI inputs designed to be also used as PC
monitors, these can expect signal in expanded RGB range when the DVI
input is selected. For these displays if t he video signal uses t he normal
RGB range, the black-white contrast will be reduced. You can set the
player to use the RGB PC Level output and restore proper contrast.
YCbCr 4:4:4 -The HDMI output is forced to use the YCbCr 4:4:4 colour
space.
NTSC- When playing NTSC-encoded discs, no system conversion is
performed. PAL encoded contents are converted to NTSC output. Blu-ray
discs encoded with 24Hz frame rate are converted to 60Hz frame rate if
neither 1080p24 Output nor Source Direct output resolution is enabled.
YCbCr 4:2:2 - The HDMI output is forced to use YCbCr 4:2:2 colour
space. Generally this is the colour space that is closest to the colour
space encoded on the discs. (Discs are generally encoded in YCbCr
4:2:0 colour space, and the video decoder decodes it into YCbCr 4:2:2.)
Multi-system - No system conversion is performed. The output video
system is the same as that encoded on the disc. Blu-ray discs encoded
with 24Hz frame rate are converted to 60Hz frame rate if neither
1080p24 Output nor Source Direct output resolution is enabled. This
mode requires a TV that supports both NTSC and PAL systems.
Colour Space (HDMI 2) - To select the colour space for the HDMI 2
output. The Mediatek decoders own in-built scaler is used for this output.
The available options are the same as those for HDMI 1.
Note: Do not select "Multi-system" if your TV does not support both PAL
and NTSC systems. The TV display may become a black screen upon
inserting a disc encoded in a different system than your TV supports.
Should this happen, you can press the OPEN button to eject the disc tray,
and then use the Setup Menu to correct the "TV System" setting.
7. Output Resolution
HDMI Deep Colour (HDMI1) - To select Deep Colour modes for the HDMI
1 output. Deep Colour is an OPTION for some TVs or projectors that
feature HDMI v1.3 or higher input.
Normally, each pixel of the video image is transmitted using 24-bit data
(8-bit per channel for R, G, B or Y, Cb, Cr). If Deep Colour is supported on
your TV each pixel of the video image can be transmitted using 30-bit
(10-bit per channel) or 36-bit (12-bit per channel) data. The increased bit
depth should result in smoother colour transitions and better gradients
for better picture quality.
To choose the output resolution that best matches your television's native
resolution. For a detailed description on how to choose a proper output
resolution, please refer to the "Select the Best Output Resolution" section
of this manual.
For BD discs with native deep colour on them the extra information will
be passed to the TV. For up-scaled content such as DVDs the deep colour
output will be interpolated but can still result in a smoother picture. The
dithering/limiting options allow discs with deep colour content to be sent
to TVs with limited deep colour support.
8. 1080p24 Output
Dithering is a way to softly limit any extra colour information in the source
material that the display cannot handle by adding 'noise' to prevent an
abrupt step in the levels.
This option only applies to the HDMI output at 1080p resolution. Many
Blu-ray discs that originated from theatrical movies are encoded using
24Hz frame rate, the same number of frames per second as the original
theatrical film. If your TV properly supports 1080p 24Hz, smoother motion
can be achieved by enabling 1080p24 output for such discs. The
available options are:
Auto (default)- Video encoded in 24Hz frame rate will be output as
1080p 24Hz if the TV informs the player that it can support the 1080p24
signal.
On - Video encoded in 24Hz frame rate will be output as 1080p 24Hz
without regard to whether the TV can support the 1080p24 signal or not.
This is useful if the TV can actually support 1080p24 but does not
properly state its capability. Please note that if the TV cannot support
1080p24, selecting this option will result in no video.
Off - Video encoded in 24Hz frame rate will be converted to 50Hz (PAL)
or 60Hz (NTSC)
25
8 Cambridge Audio
Setup menu continued
The available options are:
36 Bits - Always use the maximum 36-bit per pixel Deep Colour mode
for the output.
30 Bits (Dithered) - Use the 30-bit per pixel Deep Colour mode with
dithering of any over 30 bit content.
30 Bits - Use the 30-bit per pixel Deep Colour mode and hard limit
output at 8 bits per colour.
Off (Dithered) - Do not use Deep Colour, dithering any over 24 bit
content.
Off (default) - Do not use Deep Colour, hard limit output at 8 bits per
colour.
HDMI Deep Colour (HDMI2)- Select the Deep Colour mode forthe HDMI
2 output. The available options are the same as those for HDMI 1.
Note: Since the Deep Colour feature is OPTIONAL and may not be
supported by all TVs, enabling Deep Colour while connected to a TV
without this feature may result in no effect or no video.
At the time of writing, no BD discs are yet encoded with Deep Colour.
Demo Mode - To enable a special split-screen demonstration mode. This
is designed for the demonstration of the QDEO video processing
technology. It can also be used as an aid for setting picture control
adjustments for Noise Reduction, Colour Enhancement and Contrast
Enhancement. It should NOT be used for normal movie watching. The
available options are:
On - The video screen will be split in half. The left side shows video
without the help of QDEO video processing, and the right side
demonstrates the result of QDEO video processing.
Off (default) - Normal viewing mode.
Note: The demo mode is cancelled automatically whenever the player is
turned off.
VIdeo Only (HOlM 1) - To choose whether to only send video signal (no
audio signal) to HOlM 1 terminal or not. The available options are:
Yes - Only video signal is sent to HDMI 1 terminal. This can be useful
if you use HDMI1 only for video display, no need to lower the volume or
mute the HDTV connected to it.
No (default) - Both video and audio signals are sent to HDMI1 terminal.
10. Display Options
To configure the options for displaying on-screen information. The
following display options are available:
Subtitle Shift - To set the display position for subtitles. When the "Subtitle
Shift" is set at 0 (default), subtitles are displayed at the original position
as specified on the disc. When it is set at a value between 1 and 5,
subtitles are shifted up. When it is set at a value between -1 and -5,
subtitles are shifted down. This feature is helpful for instance to
customers using a 2.35:1 "Constant Image Height" video projection
system. Subtitles can be shifted to the active video area so they do not
get cut off.
OSD Position - To set the display position for on-screen display (OSD).
When the ·oso Position" is set at 0, OSD is shown at the top and bottom
of the video screen. When it is set at a value between 1 and 5, OSD is
shifted towards the vertical center line of the video screen. Similar to the
subtitle shift setting above, the "OSD Position" feature is helpful to
customers using a 2.35:1 "Constant Image Height" video projection
system.
OSD Mode - To select how long the on-screen display information, such
as elapsed or remaining time, stays on the TV screen. The available
options are:
Normal - On-screen display information stays on the TV screen until
the user cancels it.
Silent- On-screen display information shows on the TV screen for a few
seconds and then disappears. The front panel display still maintains
the selected display information.
Remaining- On-screen display information stays on the TV screen until
the user cancels it. By default display remaining time instead of elapsed
time.
28
Angle Mark (on/off)- To turn on/off the display of an angle mark when
a DVD or Blu-ray Disc with multiple available angles is played. Keeping
the angle mark off avoids distraction from normal movie watching.
PIP Mark (on/off) - To turn on;off the display of a Picture-in-Picture mark
when a Blu-ray Disc with secondary video is played. Keeping the PIP mark
off avoids distraction from normal movie watching.
SAP Mark (on/off) - To turn on/ off the display of a Secondary Audio
Program mark when a Blu-ray Disc with secondary video and audio is
played. Keeping the SAP mark off avoids distraction from normal movie
watching.
Screen Saver- To turn on/off the screen saver function. The screen saver
is designed to minimize burn-in concerns for plasma and CRT display
devices. The available options are:
On - After about 3 minutes of inactivity, the player will show an
animated Cambridge Audio logo moving on a black background. This
allows most areas of the screen to rest and gives all areas an equal
opportunity to refresh.
Off- The screen saver will not be activated. Use this option if your TV
does not have a burn-in issue.
Energy Saver - Video output will be turned off after 3 minutes of
inactivity. Many projectors and LCD TVs will go into a standby or sleep
mode and turn off their projection lamp or LCD backlight lamp, thus
saving energy and prolonging the lamp life. When you press any button
on the remote control or the player's front panel, the screen saver will
be cancelled and video output will be restored. If your TV Js already in
standby or sleep mode, you may need to wake up the TV by pressing a
button on its remote or control panel.
azur
Bltstream - Digital audio output via HDMI will be in bitstream format.
This option is recommended when connecting the HDMI output to an A/ V
receiver or processor that supports advanced audio decoding of Dolby
TrueHD and DTS-HD Master Audio etc.
Audio Format Setup
*Setup Menu
Off - No digital audio output via HDMI.
Playback Selup
Secondary Audio
II Off
VIdeo Setup
HDMIAudio
Ill LPCM
Audio Format Setup
Coaxial/Optical Output
1111
Audto Processing
LPCM Rate Limit
II 48k
Device Setup
SACDOutpul
W PCM
Network Setup
HDCD Decoding
• On
LPCM
Exit
Set the secondcwy audfo program mixing option
SETUP
Exit
The "Audio Format Setup" section of the Setup Menu system allows you
to configure preferences for audio output formats. The menu items in this
section are:
Menus
651/75 180
Settings
Secondary Audio ................................. .........On
.................................. ....................................Off
HDMI Audio ................................. ..................Auto
LPCM
8itstream
Off
Coaxial/Optical Output ............................. ... LPCM
8itstream
LPCM Rate Limit... ....................................... .48K
96K
192K
SACD Output ................................................. PCM
DSD
HDCD Decoding ...........................................On
Off
1. Secondary Audio
To set the Secondary Audio Program mixing option. Some 81u-ray discs
contain a secondary audio and video program, such as a director's
commentary. Some 81u-ray Discs have a sound effect when you make
menu choices. This Setup Menu item allows you to decide whether to mix
the Secondary Audio Program and menu clicking sound into the primary
audio. The options are:
On - The Secondary Audio Program and menu clicking sound are mixed
into the primary audio. Usually this will cause the primary audio volume
to be slightly reduced. High resolution primary audio will be converted to
a normal resolution in order to mix with the secondary audio.
Off - The Secondary Audio Program and menu clicking sound are not
mixed into the primary audio and you cannot hear the secondary audio
or menu clicking sound. This setting preserves the highest possible audio
quality for the primary audio.
2. HDMI Audio
To select digital audio output format from the HDMI output. The options
are:
Auto (default) - The player checks with the device connecting to HDMI
output to automatically determine which audio format to use.
LPCM - Digital audio output via HDMI will be multi-channel Linear PCM
format. When th is option is selected, compressed audio bit streams will
be decoded by the player and then sent as multi-channel PCM. This
setting is recommended when connecting the HDMI output directly to a
TV or to a receiver without advanced audio decoding capabilities.
Note: If you use HDMI to connect audio to an HDMI A/ V receiver or audio
processor, It Is Important that you choose 720p or higher HDMI output
resolution when playing high resolution audio content (DVD-Audio,
SACD, Dolby TrueHD and DT5-HD Master Audio). According to the HOM I
specification, the bandwidth available for audio is proportional to the
total bandwidth used by video. At 480p/ 576p resolution, the HDMI
specification can only support 2 channels of audio with high sample rate
(up to 192kHz), or 8 channels of audio with standard sample rate (up to
48kHz). If you play high resolution audio content at the 480p/ 576p
resolution, you may get reduced audio resolution, incomplete audio
channels, or even no audio/ video output at all. Choosing a higher output
resolution such as 720p or above allows enough bandwidth for all high
sample rate audio channels.
3. Coaxial/Optical Output
Used to set the output format for the coaxial/optical digital audio outputs.
The options are:
LPCM - Forces down-mixed 2-channel digital audio output. Choose this
setting if your receiver/ amplifier or DAC only supports stereo digital (PCM)
audio.
Bitstream - Passes audio as compressed bitstream format to the
receiver/ amplifier. Choose this setting if your receiver/ amplifier is capable
of decoding Dolby Digital and/ or DTS etc.
4. LPCM Rate Limit
To set the maximum Linear PCM output frequency for the coaxial/optical
digital output. This menu item is intended to ensure that the aud io output
is compatible with equipment that cannot support high sample rates. It
sets an upper limit to decide whether the player shall down-sample audio.
The options are:
Note: When using the Stereo or 7.1 Analog Audio outputs the LPCM rate
limit should always be set to 192kHz to allow the internal playback engine
to feed the up-sampler with the maximum sample-rate the content
supports.
48kHz - Supported by most equipment. Higher sample rate material will
be downsampled to 48kHz.
96kHz- Allows a higher sampling rate and frequency response. If using
an externally connected AV receiver or DAC via coaxial or optical, ensure
that the receiver/ amplifier can support it. Higher sample rate material
will be downsampled to 96kHz.
192kHz - Allows the highest sampling rate and frequency response. If
using an externally connected AV receiver or DAC via coaxial or optical,
ensure that the receiver/ amplifier can support it.
5. SACD Output
To select audio output format for SACD. The options are:
PCM - SACD Direct Stream Digital (DSD) data is decoded by the player
and converted into multi-channel, high resolution PCM data. The HDMI
output can be sent to an external AV receiver capable of receiving multi
channel PCM (HDMI1.1 or higher inputs are required). The 651/7518D's
own audio outputs are also active and playback of SACD material is
possible by the 651/ 7518D itself.
DSD - SACD DSD data is output over HDMI without any conversion. For
decoding by an external AV receiver capable of receiving DSD (HDMI1.2a
or higher inputs are required and the receiver must actually include
support for DSD as it is not a mandatory requirement of the HDMI spec).
27
I
8 Cambridge Audio
Setup menu continued
6. HDCD Decoding
To set the audio decoding option for HDCD (High Definition Compatible
Digital) discs. The options are:
On - HDCD is decoded by the 651/7518D. For HDCD discs, this gives
expanded dynamic range and improved audio resolution.
Off - HDCD is treated as regular CD and output as a native bitstream
preserving the hidden encoding. This is useful when the 651/7518D is
connected to an HDCD-capable NV receiver via a digital audio output
link (Coaxial, Optical, or HDMI) the output is unprocessed so the A/V
receiver can perform HDCD decoding instead.
Audio signal reference chart
81u-ray Discs may contain many types of audio signal formats, some of
those are of the high resolution lossless types such as Dolby TrueHD and
DTS-HD Master Audio. Blu-ray Discs also have many optional audio
components such as the Secondary Audio Program and the menu clicking
sound. The player's Audio Format Setup menu allows you to configure the
audio output to meet your specific preference. The following chart
provides a reference to what type of audio signal can be expected.
When ·secondary Audio' is set to ' Off":
8itstream
LPCM 2ch
- LPCM 2ch
I
LPCM 2~h ---··--
LPCM 2ch
PC_M_ 2_c_h- -- - - !f 2c_h_ ·- ---
-LPCM 5.1ch
LPCM 5.1ch - ·
[ LPCM 5.1ch
LPCM 2ch
PCM 2ch
5.1ch
LPCM 7.1ch
LPCM 7.1ch
I
LPCM 7.1ch
LPCM 2ch
! LPCM 2ch
7.1ch
Dolby Digital Plus
I LPCM up to 7.1ch_ _
r-~olb~_Digit~_l_____ ~~Iby Digital ____j LPCM5.1ch - ----=:~olby Di~tal . - - - - ---+L_P_C_M_ 2_c_h_ _ __
Dolby Digital Plus
1
Dolby True HD
I
1
Dolby True HD
DTS
DTS
LPCM 2_c_h_____r U_p_to_ 7._
1 c_h_ _ _--1
LPCM up to 192kHz
24-blt 7.1ch
Dolby Digital
LPCM 2ch
1
LPCM up to 7.1ch
DTS
LPCM 2ch
f---------------~---------------T'--------
+-5_._1_c_h_ _ _ _ _---1
Dolby Digital
.
1
i
··--
------------~f---------------~
I
Up to 7.1ch
Up to 7.1ch
----------r--------------~
DTS-HD
LPCM up to 7.1ch
~ DTS (core)
LPCM 2ch
Up to 7.1ch
H1gh Resolution
I
DTS-HD
-----r-LPCM up~96kHz- - - -DT
- S- (c-o-re-) -----~i~ -L-P_C_M2c_h_ ____+-U-p_t_o_7_.1_c_h_ _ _ _~
! DT5-HD High Resolution
I
DTS-HD Master Aud10
I
L____________j
-=~ter A~dlo __ll~~~:~~~b~;
_____
2ch____ -
L____________
_ j __
_
_ _ _ __
'---- -
__
-
-
-
-
-
_j
When "Secondary Audio' is set to "On' and the player encounters a disc with secondary audio track or menu clicking sound:
HDMI Ou;~-u~------ -1
Output Type c:>
-----~
.
I
Setting
-----------~
8itstream
_ [LPCM
l
Coaxlaf/Optlcal Outputs
i
I
8itstream
I
DTS*
DTS*
/ LPCM
Analogue Outputs
I
'
Source Format -------------~
LPCM 2ch
DTS* 2ch
f--L
- P_C_M- 5.-1-ch- -- - + -D-TS-*
i LPCM 2ch
I LPCM 5.1ch
i 2ch
-_j_
---+, -5-.1-c_h_
LPCM 2ch
LPCM 2ch
-··--·----------- --- · - ·- - - - - - - - - - - - --L - - - - - - - - - - - - - - - - r-- - - - - - - - - - - - L - - - - - - -
DTS*
I LPCM 2ch
' 7.1ch
LPCM 5.1ch
DTS*
LPCM 2ch
5.1ch
DTS*
I LPCM 2ch
- -----1--LPCM 2ch
DTS*
Dolby Digital
DTS*
1
Dolby Digital Plus
DTS*
i
Dolby TrueHD
DTS*
~----------------+-----
-
I LPCM 7.1ch
LPCM 7.1ch
LPCM up to 7.1ch
- -- - - ------+- - -- - - - - -,----
- ----
I
LPCM up to 192kHz
24-bit 7.1ch
DTS*
_ _ __ ---1
·---
- --
Up to 7.1ch
Up to 7.1ch
- - - -- --+- -- - - -- + - - - - -- --t--- - - - - -- + - - - -- - -+--- - --- -
DTS
DTS*
i LPCM up to 7.1ch
DT5-HD High Resolution
DTS*
1LPCM up to
3~S-H':_ M~ster ~u~io _ --~~S*________
I
7.~h_ _ _-l DTS*
LPCM up to 7.1ch
Note: All audio output signals are mixed with primary, second audio and
menu clicking sound.
28
DTS*
h
LPCM 2ch
-
[ LPCM 2ch
TS_*__________ _ __-+1-L-PC
- -M
~ch
-
1
Up to 7.1ch
I
Up to 7.1ch
---
· - t _u_p_t_o_7_.1_c_h______
* Denotes mixed audio re-encoded into DTS bitstream format.
___J
azur
Recommended audio format options
Depending on your specific audio/ video connection method, the audio
format options of the 651/7518D may need to be adjusted to match your
configuration. Please refer to the video and audio connection methods
described previously in this guide and the following audio setup
guidelines.
Audio connection directly to TV
If the player is connected directly to the TV through HDMI, through DVI
and analogue L/R audio cables, or through component video and
analogue L/R audio cables, it is recommended that you use the following
audio format options:
Secondary Audio:
HDMIAudio:
SACD Output:
HDCD Output:
Coaxial Optical Output:
LPCM Rate Limit:
On
LPCM
PCM
On
(any- not in use)
(any- not in use)
651/7518 0
Multi-channel digital audio to Receiver through Coaxial
or Optical SPDIF
If your receiver only supports Coaxial/Optical, Dolby Digital and DTS
decoding, the following audio format setup options are recommended:
Off (or On if you need secondary audio)
Secondary Audio:
Off
HDMI Audio:
(any- SACD is not available through
SACD Output:
the opticaljcoaxial output)
On (or Off if the receiver can decode
HDCD Decoding:
HDCD)
8itstream
Coaxial Optical Output:
48k (or higher if supported by the
LPCM Rate Limit:
receiver)
Stereo analogue audio to Receiver
Multi-channel digital audio to Receiver through HOM I
If your receiver/ amp only offers stereo audio connections, you will need
to use analogue RCA-style cables to connect to it. For the 7518D use the
dedicated Left and Right stereo outputs, for the 6518D use the FL (Front
Left) and FR (Front Right) and set the unit to downmix all content to Stereo
(see appropriate section in this manual). The following audio format
options are recommended:
If your receiver supports HDMI v1.3 with decoding capability for high
resolution lossless audio formats such as Dolby TrueHD and DTS-HD
Master Audio, please set these audio format options:
Secondary Audio:
HDMIAudio:
SACD Output:
Secondary Audio:
HDMI Audio:
SACD Output:
HDCD Decoding:
Coaxial Optical Output:
LPCM Rate Limit:
Off (or On if you need secondary audio)
8itstream
PCM (or DSD if the receiver supports
DSD over HDMI)
On (or Off if the receiver can decode
HDCD)
(any - not in use)
(any - not in use)
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but
not high resolution lossless audio formats such as Dolby TrueHD and DTSHD Master Audio, please set these audio format options:
Secondary Audio:
HDMI Audio:
SACD Output:
HDCD Decoding:
Coaxial Optical Output:
LPCM Rate Limit:
HDCD Decoding:
Coaxial Optical Output:
LPCM Rate Limit:
Off (or On if you need secondary audio)
Off
PCM (the internal DACs need to use
PCM created from the SACDs DSD
stream to acheive SACD playback)
On
(any - not in use)
(any - not in use)
Audio Processing setup
The "Audio Processing Setup" section of the Setup Menu system allows
you to configure how the player will process audio signals before sending
them to the output.
Off (or On if you need secondary audio)
LPCM
PCM (or DSD if the receiver supports
DSD over HDMI)
On (or Off if the receiver can decode
HDCD)
(any- not in use)
(any - not in use)
*Setup Menu
Playback Setup
Speaker Configuration
Video Setup
Crossover Frequency
• 80Hz
Audio Fonnat Setup
Dynamic Range Control
• Auto
Audio Processing
Multi-channel analogue audio to Receiver
Device Setup
If the player is connected to an A/V receiver t hrough the 7.1ch or 5.1ch
analogue audio jacks using 8 or 6 RCA/Phono cables, you can still play
all the supported audio formats and let the 651/7518D decode them
and then listen them via your A/V receiver and surround-sound system.
The following audio format setup options are recommended :
Network Setup
Secondary Audio:
HDMIAudlo:
SACD Output:
HDCD Decoding:
Coaxial Optical Output:
LPCM Rate Limit:
Off (or On if you need secondary audio)
Off
PCM (the internal DACs need to use
PCM created from the SACDs DSD
stream to acheive SACD playback)
On
(any- not in use)
(any - not in use)
Exit
(,:)
:!)(~(!) Configure speaker arrangemenl for the analog audiO output
~
Menus
SE.T\JP 1 Exit
Settings
Speaker Configuration
Crossover ......................................................40Hz- 250Hz
Dynamic Range Controi ...............................Auto
On
Off
Also set Speaker Configuration in the "Audio Processing" menu:
Set Down Mix to "7.1Ch" or "5.1Ch".
Set the speaker size and subwoofer properly according to your actual
audio hardware as detailed on the following pages.
Enable or select the multi-channel analog inputs on your receiver.
29
I
8
Cambridge Audio
Setup menu continued
Speaker Configuration (7.1 channel
analogue audio output only)
5.1Ch -This mode enables 5.1ch decoded audio output. The number of
actual output channels depends on the disc. If the source content has
more channels, the surround back channels will be mixed into the
surround channels.
The following settings determine how the 651/751BD's internal
surround-5ound decoder operates. They do not affect audio transmitted
over HOM I or S/P DIFjTOSLINK.
1:1ch - This mode enables 7.1ch decoded audio output. The number of
actual output channels depends on the disc.
In the Speaker Configuration menu you can configure speaker settings
such as down-mix mode, number of speakers, their distance, size and
trim level. The Speaker Configuration menu shows an illustration of the
speaker placements to assist you on properly configuring the speaker
parameters.
Upon entering this menu, the cursor is positioned on the front left
speaker. You may use the ~ 1 • buttons to move the cursor. The •
button moves the cursor in clockwise sequence, and the ~ button moves
the cursor in counterclockwise sequence.
When the cursor is over the "Down Mix" or "Exit' options, you can also use
the ... ; ... buttons to highlight these options.
Test Tone
Test tone is a special group of artificially-created sounds that are used to
test your audio speaker system and help to identify any wiring faults. By
default the Test Tone is set to ' Off', with the status is displayed in the
lower left corner of the screen.
To begin the test, press the ... ; ... buttons to highlight the "Test Tone•
option, press the Enter button to change the test tone status to "On".
Then press ARROW buttons to select a speaker, you will hear the test
sounds. To stop the test process, press ... ; ... buttons to highlight the
"Test Tone" option and press the Enter button to switch the status back
to "Off". Please note these test tones only apply on multi-channel audio
outputs.
Speaker Settings
Size:
Large
Distance:
12.00ft
Trim:
O.OdB
Next Speaker
ExH
For each speaker in the home theatre system, you can set its size,
distance and trim level. To configure a speaker, move the cursor to
highlight the speaker and press the Enter button. The Speaker Settings
menu on the right side of the screen will be activated. In the Speaker
Settings menu, use the ... ; ... buttons to select a parameter, and then
press the Enter button to change it. To exit the Speaker Settings menu
and return to the Speaker Configuration illustration, press the ~ button
or select the "Exit" option. You can also move on to configure the next
speaker by selecting the "Next Speaker" option.
The following speaker parameters can be configured :
4oC t
Configure the frOnt left speakM
Down Mix Mode
Down mix is the process of converting multi-channel audio to a lesser
number of channels. For example, converting a 5.1ch source to stereo or
converting a 7.1ch source to 5.1ch. Down mixing allows the audio output
from the player to match the exact number of speakers available in your
home theatre system.
Size:
Large
Distance:
12.001t
Trim:
O.OdB
Next Speaker
The current down mix mode is displayed in the lower right corner of the
speaker placement illustration.
ExH
To change the audio down mix setting, press the Enter button while the
cursor is over the "Down Mix" option. The following down mix modes are
available:
Configure f1e front left speaker
1.Size
LT/RT
Stereo
5.1Ch
7.1Ch
The speaker size parameter sets bass filtering control for the speakers.
The bass frequency is set in the "Crossover Frequency" option of the
"Audio Processing" section of the Setup menu:
Large - Bass frequencies are passed to the speakers.
Small - Bass frequencies are not passed to the speakers to reduce
possible distortion. If a subwoofer is available, bass frequencies are
redirected to a subwoofer.
On (for subwoofer only) - Specify that a subwoofer is available.
4 :~·
Chose down mix mode
LT/RT - Left Total/Right Total. The centre and surround channels are
decoded and then Matrix encoded into the two front channels. A Dolby
Pro Logic receiver can then decode the two channel audio that is output
back into surround audio.
Stereo- This mode down-mixes multi-channel audio to 2-channel stereo
output. For original stereo content the output will not change. For original
multi-channel content the surround and centre channels will be mixed
with the left and right front channels. Recommended for use with TV sets
or stereo receiver; amplifiers (without Prologic decoding).
30
Off - Speaker for the corresponding position does not exist. Audio for the
missing speaker is redirected to other speakers or discarded if redirection
is not possible.
Note: The front, surround and surround back speakers are configured as
pairs. Changes to the size of one speaker will automatically change the
other speaker of the pair.
651/75 180
azur
Other Audio Processing Settings
2. Distance
The speaker distance parameters sets delay control for the corresponding
audio channel. This delay is used to compensate for the audio
propagation time difference caused by the placement of speakers of
different distances from the listening position.
Speaker distance delay is only applied if the player is decoding multichannel audio. If you use bitstream audio output to your A/V receiver, the
bitstream audio is not adjusted for speaker distance delay.
Since the delay is calculated based on the distance difference from each
speaker to the listener's position, it is important to set the distance for the
front speakers first and then the other speakers. Anytime you change the
distance of the front speakers, the distance of the other speakers will be
automatically adjusted to maintain the same distance difference.
1. Crossover Frequency
When the speaker size is set to "Small" in "Speaker Configuration", bass
frequencies are not passed to the speakers to reduce possible distortion,
bass frequencies will instead be redirected to the subwoofer. The
available options are:
40Hz/ 60Hz/ 80Hz/ 90Hz/ 100Hz/ 110Hz/ 120Hz/ 150Hz/ 200Hz
1250Hz- These are the available crossover frequencies. You can press
the .... I ... buttons and the Enter buttons to select it. This option applies
to all speakers (center, front, surround , and surround back speakers). By
default the crossover frequency is 80Hz.
2. Dynamic Range Control
Distances:
1 - Listener to Front
2 - Listener to Centre
3- Listener to Surround Left
Speaker Icons:
FL - Front Left
FR - Front Right
C- Centre
SW - Subwoofer
SL- Surround Left
SR- Surround Right
SBL - Surround Back Left
SBR- Surround Back Right
To set the Dynamic Range Compression (DRC). DRC can smooth out the
sonic peaks and valleys common with wide-range digital audio. Enabling
DRC may make low level audio more audible during low-level listening.
Turning off DRC restores the sonic energy present in the original
recording. The available options are:
Auto - Play at the dynamic range specified by the disc. This option applies
to Blu-ray Discs only. For other disc types no dynamic range compression
is applied.
On - Turn on dynamic range compression.
Off- Turn off dynamic range compression.
Device Setup
For example, in the above diagram, measure the distance (in feet) from the
primary listening position to the Front Left or Front Right Speaker. Your
Front Right and Left speakers must be the same distance from the
listener. Enter the distance of the Front Speakers (1. in the above picture)
into the "Speaker Configuration" menu.
The "Device Setup" section of the Setup Menu system allows you to
configure additional player options related to the hardware and control
functions. The menu items in this section are:
*Setup Menu
Next, measure the distance (in feet) from the centre speaker (2) to the
listening position. Move the cursor to highlight the Centre speaker in the
Channel Delay setup page, and enter the distance (as close as possible)
in feet. Repeat for each speaker in the system (Centre, Surround Left,
Surround Right, Surround Back Left, Surround Back Right and Subwoofer)
as available. The player will insert appropriate delay to the center,
subwoofer and surround channels to make sure sound waves from
different speakers arrive at the listener at the same time.
Notes:
-The distance between the surround speakers and the listener must be
shorter than or equal to that between the front speakers and the
listener.
-The front, surround and surround back speakers are configured as
pairs. Changes to the distance of one speaker will automatically change
the other speaker of the pair.
3. Trim
The speaker trim level parameters sets the volume of each individual
channel. For most accurate results, it is recommended that you use test
tones from a calibration disc, such as Digital Video Essentials HD Basics,
and a SPL (Sound Pressure Level) meter. The trim level can be set to+/10dB in 0.5dB increments.
Playback Setup
Firmware Information
Video Setup
Firmware Upgrade
Audio Format Setup
Firmware Notification
w
Audio Processing
HOM I CEC
Iii Off
Device Setup
Front Panel Display
• Standard
Network Setup
Persistent Storage
On
Exit
VMtW CUTt:m\ firmware version and system information
Menus
SETUP 1 Exil
Settings
Firmware Information
Firmware Upgrade ........................................Via Disc
Via USB
Via Network
Firmware Notification ........ ........................... On
Off
HDMI CEC ..................................................... HDMI 1
HDMI 1 (Limited)
HDMI2
HDMI 2 (Limited)
Off
Front Panel Display ......................................Standard
Dim
Off
Persistent Storage .......................................Storage Device
I nterna I Flash
USB Drive
Total Space
Available Space
Erase BD-Video Data
DivXVOD DRM
Easy Setup
Reset Factory Defaults
31
I
8 Cambridge Audio
Setup menu continued
1. Firmware Information
6. Persistent Storage
To display the currently installed firmware version.
Persistent storage is a data storage area that holds additional contents
for BonusView and BD-Live features. The data will be kept even if you turn
off the player. The following persistent storage management options are
available:
2. Firmware Upgrade
To upgrade the player's firmware. This operation is only available when
the playback is completely stopped or when there is no disc loaded.
The firmware is the system software that controls the features and
functions ofthe player. Since the Btu-ray disc specifications are new and
evolving, it is possible that a Btu-ray disc manufactured after the player
was manufactured use certain new features of the Btu-ray disc
specifications. We may also introduce new features from time to time.
There are three ways to upgrade the player's firmware. The options are:
Via Disc - From time to time, you may be able to download a disc image
from the Cambridge Audio's website www.cambridge-audio.com; care
and burn an upgrade disc.
Via USB - You may also be able to download the firmware files from
Cambridge Audio's web site to a USB drive and then use the USB drive to
upgrade the player. For the above two cases closely follow any instructions
on our website.
Via Network - If the player has a working Internet connection, you may
upgrade the player directly over the Internet. Please follow the
instructions on your TV screen.
Storage Device - To select which storage device should be used as the
persistent storage. The 651/ 751BD is equipped with 1GB of internal flash
memory. There are also two USB 2.0 ports on the player that can accept
a USB drive to be used as the persistent storage. The choices are:
Internal Flash - Use the internal flash memory for persistent storage.
USB Drive - Use a USB drive for persistent storage. To meet the
specification for BD-Live, a USB flash drive of 1GB or larger is required. A
USB hard disk is not recommended.
Note: The new storage device choice becomes effective only after the
player is restarted. Please make sure that you turn off the player and then
turn it back on after changing the "Storage Device" option.
Total Space - To display the total space of the persistent storage.
Available Space - To display the currently available space of the
persistent storage. If the available space becomes too low, some Btu-ray
Discs may not play properly.
Erase BD-Video Data - To erase the BD-Video data from the persistent
storage.
3. Firmware Notification
7. Divx VOD DRM
To set whether the player should automatically check if new firmware
versions are available via the Internet server and notify the user about
new firmware. The options are:
To register or de-register your player for DivX digital right management for
video on demand. A register or de-register code will be generated and
shown.
On - Check for new firmware version automatically and notify the user
about new firmware. Requires working network connection.
8 Easy Setup
Off- Do not check for new firmware version automatically.
Choose this option to bring up the Easy Setup procedure.
4. HDMI CEC
9. Reset Factory Defaults
CEC (Consumer Electronics Control) is an optional HOM I feature t hat can
enable convenient remote control and automatic setup of consumer
electronics over the HOM I connection. The remote control function allows
you to use a single remote handset to operate multiple devices connected
via HOM I. For example, you may use the TV remote to control playback of
the Btu-ray disc player. The automatic setup function can automatically
turn on the TV and change to the correct input when you start playing a
disc in the Btu-ray Disc player. It can also turn off the player automatically
when you turn off the TV. The implementation and compatibility of this
feature varies by device manufacturer. Each may only implement part of
the features or add their own proprietary functions. The manufacturerspecific implementation of the HDMI CEC function is often given a
proprietary name of •... Link" or "...Sync". The 651/ 751BD provides three
modes for the HDMI CEC function:
To reset all settings to the factory default value.
HDMI1 & 2 - HDMI CEC is enabled. Use this mode if your other devices
are compatible with the player.
HDMI 1 & 2 (Limited) - HDMI CEC is enabled but the 651/ 751BD will
only respond to playback control commands. It will not respond or issue
power on/ off and input selection commands. Use this mode if you do not
want the automatic setup function to turn on; off your devices.
Off - HDMI CEC feature is turned off. The player will not respond to HDMI
CEC commands from other devices, nor will it setup other devices
automatically.
5. Front Panel Display
To control the display intensity of the front panel Vacuum Fluorescent
Display (VFD) information window. This option allows you to dim it or turn
it off. The available options are:
Standard - The VFD window is at full brightness.
Dim- The VFD window is at reduced brightness.
Off - The VFD window is turned off. In this mode the display resumes
momentarily when there is any user operation.
32
Note: The parental control password and ratings will not be reset. This
operation is only available when the playback is completely stopped or
when there is no disc loaded.
azur
4. Internet Connection
Network Setup
The "Network Setup" section of the Setup Menu system allows you to
configure the parameters for the Internet connection of the player, test
the connection and restrict BD-Live access. The menu items in this
section are:
*
To select the internet connection type. The available options are:
Ethernet (default) - Connect to internet through the Ethernet cable,
please refer to the connection instructions of the manual. Choosing this
will make the "Wireless Setting• option grey and un-selectable.
Wireless - Connect to internet through the external wireless adaptor,
please refer to the connection instructions of the manual. Choosing
"Wireless " will start the wireless setting procedure, and also make the
"Wireless Setting" option in the next row selectable.
Setup Menu
Playback Setup
Connection Information
VIdeo Setup
BO·llve NetworK Access
•Off
Audio Format Setup
My Network
•
On
Audio Processing
lntemet Connection
•
Ethernet
Device Setup
Wireless Setting
Network Setup
IP Setting
Exit
Proxy Setting
• Auto (DHCP)
.....
(~)
I ll§i<)(fl
@
651/75180
•Off
Oisplayconnectioninfonnation
Menus
SfTUP ) Exit
Settings
Connection Information
BD-Live Network Access ..............................On
Limited
Off
Off - Internet access is prohibited. This will make all the rema ining
options in Network Setup screen grey and un-selectable.
5. Wireless Setting
Note: The 75180 includes a wireless adaptor. The 65180 does not. If you
wish to use the 65180 wirelessly, contact your Cambridge Audio dealer
to obtain a Cambridge Audio wireless adaptor. Other wireless adaptor will
not work .
To start the wireless setting procedure. The wireless setting procedure
can be started either by selecting the "Wireless Setting" option, or by
selecting "Wireless" in "Connection Method" option, the procedure is
described as follows:
The player first searches for the last successful wireless settings. If any
exist, a message will pop up as below:
My Network ...................................................On
Off
Your previous wireless settings have been found
Do you want to use them or start with new settings?
Internet Connection .....................................Ethernet
Wireless
Off
*''"'*
Wireless Setting
IP Setting ...................................................... Auto (DHCP)
Manual
Proxy Setting .................................................On
Off
Connection Test
1. Connection Information
To display the current internet connection information, such as
connection type, IP address, Ethernet MAC, Wireless MAC, etc.
2. BD-Live Network Access
To restrict BD-Live content access. The available options are:
On - BD-Live access is permitted.
Limited - BD-Live access is permitted only for contents that have a valid
content owner certificate. Internet access is prohibited if the BD-Live
contents do not have a certificate. This option ensures that you are
accessing only authentic content, although it may block your access to
smaller independent content providers.
Off - BD-Live access is prohibited.
3. My Network
Use Previous - To use the last successful wireless setting. A summary of
the previous wireless setting will pop up showing information like SSID
(Service Set Identifier), Security Mode and Security Key (in asterisk *).
Then a connection test will be automatically performed and the test result
shown on the screen.
Start New - To start a new wireless configuration . The 651/ 75180
supports three wireless configuration methods and the available options
are:
Scan -To scan for available wireless networks. The player automatically
scans for any available wireless networks nearby and the search results
are listed in a window. You can press the • / • buttons to highlight a
network then press the Enter button to select it. If this network is
secured, you need to input the security key using the remote control.
Then a connection test will be automatically performed and the test
result is shown on the screen.
Manual - To manually set the information for a wireless network. You
need to use the remote control to input the SSID, select the Security
Mode and input the Security Key. Then a connection test will be
automatically performed and the test result is shown on the screen.
WPS - To start the Wi-Fi Protected Setup. 651/ 75180 supports the
WPS standard to provide an easy and secure establishment of a
wireless home network. If you have a router/ wireless access point that
also support WPS. The available options are:
To set the My Network (in-home media sharing) client option. My Network
option enables the player to receives streaming audio, video and photo
from UPnP media servers on the home network. The available options
are:
PIN - To configure the WPS using a Personal Identification Number.
The player will generate a PIN and you need to input it into the
software control panel of your wireless router or access point. Please
follow the on-screen instruction.
On (default) - Enable the My Network client. The available media servers
are listed in the " My Network" option of Home menu.
PBC- To configure the WPS using Push Button Control. You need to
push a PBC button on your wireless router or access. point to initiate
the wireless connection. Please follow the on-screen instruction.
Off - Disable the My Network client. No media servers will be shown in
" My Network" option, and a warning message will show after you enter
" My Network" option.
Note:
- SSID is short for Service Set Identifier. It is an identifier for each wireless
router or access point, and is also referred as a network name.
- WPS is short for Wi-Fi Protected Setup (WPS). It is the latest standard
for easy and secure wireless home network configuration . It is also
named Wi-Fi Simple Config. To use WPS, a WPS compatible router or
access point is required.
33
I
8
Cambridge Audio
Setup menu continued
6. IP Setting
To determine how the player obtains its IP address. The available options
are:
Auto (DHCP)- The player automatically obtains its IP address information
using DHCP {Dynamic Host Configuration Protocol). This is the default
setting. In most cases, automatic IP configuration is best and requires no
user intervention.
Manual - Manually enter the numeric IP address information. For more
information on how to manually configure the Internet connection and
what values to use, please consult your broadband router/modem
instruction manuals or call your Internet service provider.
IP Address - The Internet Protocol address of the player. When "IP
Configuration" is set to "Auto {DHCP)", the value displayed here is
obtained using DHCP and cannot be changed .
Subnet Mask - Each IP address has an associated subnet mask. It is
used by the player to decide whether to route network traffic through the
router or directly to another device on the same network. When "IP
Setting• is set to "Auto (DHCP)", the value displayed here is obtained
using DHCP and cannot be changed.
Gateway - The IP address of the router. It is also called "default
gateway" or "default router". When "IP Setting" is set to "Auto {DHCP)",
the value displayed here is obtained using DHCP and cannot be
changed.
ONS 1 - The IP address of the first (primary) DNS (Domain Name
System) server. DNS is the mechanism to translate human-readable
addresses to numeric IP addresses. When "IP Setting" is set to "Auto
(DHCP)", the value displayed here is obtained using DHCP and cannot
be changed .
ONS 2 - The IP address of the second {secondary) DNS server. When
"IP Setting" is set to "Auto (DHCP)", the value displayed here is obtained
using DHCP and cannot be changed.
7. Proxy Setting
To configure the proxy server settings. A proxy server works as an
intermediary for network communication between clients and other
servers, which can provide benefits like security, anonymity, speedup or
circumventing regional restrictions.
On - To access the Internet via a proxy server.
Proxy Host: To enter the proxy host name using the remote control.
Proxy Port: To enter the proxy host port number using the remote
control .
Off (default) - Do not use a proxy server.
8. Connection Test
To test the Internet connection . It is recommended that you test the
connection when you initially connect the player to the Internet, or
whenever changes to "IP Setting" and other network parameters are
made.
Depending on your primary video output, the detailed Picture Adjustment
menu will be slightly different as HDMI1 uses the Marvell QDEO scaler
which has more sophisticated features and algorithms for adjustment as
below.
HDMil
Picture Mode
Model
I
I
Brightness
0
-16
Contrast
0
·16
Hue
0
-16
Saturation
0
-16
+16
Sharpness
0
-16
+16
Noise Reduction
0
0
+8
Color Enhancement
0
0
+4
Contrast Enhancement
0
0
I
I
+16
-
+16
+16
+4
Exit
To change a picture adjustment parameter, use the •/.., buttons to
highlight the parameter, and use the ~ 1 ~ buttons to change its value.
To aid in the adjustment of picture control parameters, the picture
adjustment menu will be reduced to only show the parameter being
adjusted once you press the ~ I ~ buttons. The reduced menu will be
positioned near the bottom of the screen.
You can continue adjusting the current parameter by pressing the ~ 1 ~
buttons. To select another parameter, press the •/.., buttons. Press the
Enter button to return to the large Picture Adjustment menu.
To exit the Picture Adjustment menu and return to the Setup Menu, either
select "Exit" or press the Return button.
The following picture adjustment controls are available, for HDMI1,
HDMI2 and Component video:
Picture Mode - The 651/751BD allows you to save up to three (3)
customized video modes.
Press the ~ 1 ~ buttons to switch the mode and all parameters will be
automatically adjusted to their stored values. Changes to the current
parameter values will be stored automatically when you exit the Picture
Adjustment screen or, switch to another Picture Mode.
Brightness - To adjust the brightness (black level) of the video output.
Contrast - To adjust the contrast (white level) of the video output.
Note: Proper brightness and contrast settings are necessary for a quality
video output. If you do not have the correct black and white levels, your
images can appear washed out or can lose detail in shadows when
watching darker scenes. Televisions have brightness (black level) and
contrast (white level) controls; however it may require a combination of
tweaking both the player and your television to get the optimal result.
First adjust the television's picture controls for the best possible picture.
Once that is done, try changing the player's settings to further refine the
picture to the optimal result.
Hue - To adjust the hue (tint) of the video output.
Picture Adjustment
Saturation -To adjust the saturation (colour intensity level) of the video
output.
Picture Adjustment is a special section of the Video Setup menu. It allows
you to fine tune many picture control parameters in order to achieve the
optimal picture quality and visual result. To use Picture Adjustment, press
the Setup button on the remote control to enter the player's Setup Menu,
and then choose "Video Setup" - "Picture Adjustment", then select the
primary video output terminal. The Setup Menu will be replaced by the
Picture Adjustment menu:
Sharpness - To set the sharpness of the video output (Detail/Edge
Enhancement), this a video processing function that can control the
image sharpness but if overdone may cause unwanted artifacts.
For information on how to choose your primary video output, please refer
to Primary Output section of this manual.
34
For HDMI1, the sophisticated QDEO video scaler is used sharpness level
can be set between -16 and +16. The default is level 0, which turns off
sharpness enhancement. The negative levels may be used to reduce or
eliminate overly sharpened video, the picture being progressively
softened.
The positive levels increase the sharpness. At level 1, the player applies
low level Detail Enhancement, during which the video processor isolates
the detailed parts from the original image, processes them separately
and integrates back before the final output. At level 2, the player
increases Detail Enhancement to a higher level. Generally, to make an
image "sharper", we recommend using level 1 and 2. At level 3 and
above, the player adds Luminance Transition Improvement (LTI) and
Chroma Transition Improvement (CTI), which further sharpen the
luminance transition and chroma transition . However, we do not
recommend using level 3 and above unless the source content is from a
poor source.
azur
651/75180
Filters (751BD only)
For HDMI 2 & Analog, the Mediatek chipsets in-built scaler is used and
sharpness level can only be set between 0 and +2. The default is level 0.
The higher the level, the sharper the video details are. However, too high
a sharpness level may cause while line etching around objects.
Noise Reduction - To select whether the player shall apply video noise
reduction processing.
For HDMI 1, the noise reduction level can be set between 0 and 8. The
default is level 0, which turns off noise reduction . When set to level 1,
the QDEO scaler adjusts the picture quality by reducing "mosquito noise "
(artifacts around the outlines of objects) and " block noise" (mosaic-like
patterns caused by video compression). These two noise reduction are
also called Compression Artifacts Reduction (CAR) and have several levels
of aggressiveness. When set to level 2, the player applies the Motion
Adaptive Video Noise Reduction (VNR), wh ich handles the random noise
and the film-grain noise (natural variation of picture intensity caused by
film grain).
Its level is automatic because there is a noise estimator circuitry in the
video processor that calculates how much noise presents and adjusts
the level of VNR accordingly. When set to a high level between 3 and 4,
the player applies both CAR and Motion Adaptive VNR, with more
aggressive "block noise" reduction at level 4. At level 5, the player applies
aggressive CAR for low quality video content, and adds Motion Adaptive
VNR at level6. At level 7, the player applies the most aggressive CAR for
very low quality video, and adds Motion Adaptive VNR at level 8.
Remember that excessive noise reduction may cause a loss of detail. We
recommend using the noise reduction function only when you encounter
poorly encoded or compressed video that has apparent noise artifacts.
For HDMI 2 & Analog, the noise reduction level can be set between 0 and
+3. The default is level 0. When user increases the level, the player
adjusts the picture quality by applying mosquito noise reduction, random
noise reduction and MPEG block noise reduction at the same time. The
higher level user sets, the more aggressive noise reduction functions
apply.
For all sources the 751BD up-samples all internally decoded material to
24/ 192kHz via an Analog Devices SHARC DSP.
This runs our proprietary code from Anagram Technologies which
performs jitter suppression, up-sampling and anti-alias filtering for all10
analog outputs (7.1 and Dedicated Stereo).
The front panel Filter button allows cycling between three different antialias filters as described below.
The three different Filter functions are: Linear Phase, Minimum Phase
and Steep. All three filters are optimised specifically for audio playback.
Each offers excellent sound quality but differs subtly in optimisation,
hence we've made all three available to you .
Note: For clarity, all diagrams show the theoretical response of the DSP
itself, excluding any analog filtering at the DAC outputs or the anti-aliasing
filter applied during recording and/ or mastering of the digital source.
Linear phase filter frequency response
--,I
20
:
·20
1\
-40
cc
~
Q)
I
\
-60
-so
"0
.E
c
·100
::;:
·120
"""'
-140
·160
1'1"11
Contrast Enhancement (HDMI 1 video output only) - Used to select a
colour enhancement level (expands details in the shadows) on the video
output.
'I Ill 1111'
"'
I
·200
Colour Enhancement (HDMI 1 video output only) - Used to select a
colour enhancement level (enhance certain colours in the spectrum) of
the video output. It provides the ability to make more vivid some colours
without causing hue shifts, loss of details or changes in skin tones.
'"""'
·160
0 .1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
frequencyj FS (Input sampling rate)
The Linear Phase filter is a highly regarded aud io filter offering low ripple
in both the pass and stop bands, and what is known as constant group
delay. Constant group delay means that audio signals of all frequencies
are always delayed by the same amount when passing through the filter.
All audio is therefore fully time-coherent at the output.
The trade-off with th is type of filter is that due to internal feed-forward in
the DSP, its impulse response will exhibit some pre-ringing. In other
words, when excited with a theoretical impulse, the output has both a
small amount of pre- and post-spike amplitude ringing (albeit well
damped).
Linear phase impulse response
Q)
"0
::J
·c."'
E
<(
."n 11 ' v
v ~
20
40
60
80
I
100
Time (samples)
120
140
160
180
I
8 Cambridge Audio
Filters continued
Minimum phase filter frequency response
Steep filter frequency response
20 ,_~,_--,---~---r---r---r---,---,---,--~
20
-20
-20
\'
t----+---+---+--+--1-+---+---+----+-----i----
m
$
~--+---+---4---~--~+--+---+---+--~----
~
$
~--+---+---4---~--~~·--~--+---+---4----
1\
Steep Iter - \
~ ~--~--~--~--~~~--~--~--~--~--
'0
~
~
Li ear pha e filter
:-
·100
~--+---+---4---~--~-'--~--+---+---4---­
~ ·UO t----+---+---+---+--~~-+---1-----+----+--~
-160
·160
t=t=tt=t=1MiiM-
·160
·180
~--+---+---+---~--+--+---+---+--~-----!
-200
l----+---_j_----1-----+-----l-----'-----l-----1------1------1
-140
·200
0 .1
0.2
0.3
0.4
0.6
0 .5
0.7
0.8
11•
0.1
0.9
0.2
The Minimum Phase filter is another highly regarded audio filter that
offers even lower ripple in the pass and stop bands. Unlike the Linear
Phase filter, group delay is not constant so some time-coherence is lost;
however, phase shift is low and the particular benefit with this filter is that
the impulse response exhibits no pre-ringing.
Minimum phase impulse response
~vv v
20
0 .6
0.6
0.7
0.8
'
!
0.9
Our Steep filter is a linear phase filter that has been optimised for stop
band attenuation of close-in aliasing images. Here we have traded a little
attenuation of the very highest frequency response (for 44.1kHz sampled
material it would be -2dB at 20kHz) and a little more pre- and post-ringing
for a very steep attenuation just outside the pass band. The Steep filter
is able to attenuate aliasing at 22kHz by some 80dB.
Steep filter impulse response
,n n •
vv
40
0.4
1f
frequency/FS (Input sampling rate)
frequency/FS (Input sampling rate)
' ~ AAA
0.3
\ I
.A
~
I
A ~
IV\ IV
60
60
100
120
140
160
180
20
40
60
Time (samples)
80
100
uo
140
160
160
Time (samples)
Note: Ail filters exhibit the same ultimate roil-<>ff of approximately 140dB.
The following table shows the filter stop band attenuation for 44.1kHz
material as an example:
Linear Phase
Minimum Phase
Steep
Roil-off at 20kHz
-0.1dB
-O.ldB
-2dB
Roil-<>ff at 22kHz
-10dB
-10dB
-82dB
Ultimate roil-off
140dB
140dB
140dB
We encourage you to experiment with the filters to determine which sound
best to your ears and using your source equipment/programme material.
azur
651/7518 0
Note: These affect the Audio/Subtitle/Disc menu defaults only not the
On Screen menu language.
Appendix - language code list
Code
Language Name
Code
Language Name
Code
Language Name
6565
Afar
7285
Hungarian
8083
Pashto, Pushto
6566
Abkhazian
7289
Armenian
8084
Portuguese
6570
Afrikaans
7365
lnterlingua
8185
Quechua
6577
Ameharic
7378
Indonesian
8277
Rhaeto-Romance
6582
Arabic
7383
Icelandic
8279
Romanian
6583
Assamese
7384
Italian
8285
Russian
6588
Aymara
7387
Hebrew
8365
Sanskrit
6590
Azerbaijani
7465
Japanese
8368
Sindhi
6665
Bashkir
7473
Yiddish
8372
Serbo-Croatian
6669
Byelorussian
7487
avanese
8373
Singhalese
6671
Bulgarian
7565
Georgian
8375
Slovak
6672
Bihari
7575
Kazakh
8376
Sloven ian
6678
Bengali, Bangia
7576
Greeniandic
8377
Samoan
6679
Tibetan
7577
Cambodian
8378
Shona
7578
Kannada
8379
Somali
Albanian
Serbian
6682
Breton
6765
Catalan
7579
Korean
8381
6779
Corsican
7583
Kashmiri
8382
6783
Czech
7585
Kurdish
8385
Sundanese
6789
Welsh
7589
Kirghiz
8386
Swedish
6865
Danish
7665
Latin
8387
Swahili
6869
German
7678
Lingala
8465
Tamil
6890
Bhutani
7679
Laothian
8469
Telugu
6976
Greek
7684
Lithuanian
8471
Tajik
6978
English
7686
Latvian,Lettish
8472
Thai
6979
Esperanto
7771
Malagasy
8473
Tigrinya
6983
Spanish
7773
Maori
8475
Turkmen
6984
Estonian
7775
Macedonian
8476
Tagalog
6985
Basque
7776
Malayaiam
8479
Tonga
7065
Persian
7778
Mongolian
8482
Turkish
7073
Finnish
7779
Moldavian
8484
Tatar
7074
Fiji
7782
Marathi
8487
Twi
7079
Faroese
7783
Malay
8575
Ukrainian
7082
French
7784
Maltese
8582
Urdu
7089
Frisian
7789
Burmese
8590
Uzbek
7165
Irish
7865
Nauru
8673
Vietnamese
7168
Scots Gaelic
7869
Nepali
8679
Volapuk
7176
Galician
7876
Dutch
8779
Wolof
7178
Guarani
7879
Norwegian
8872
Xhosa
7185
Gujarati
7982
Oriya
8979
Yoruba
7265
Hausa
8065
Panjabi
9072
Chinese
7273
Hindi
8076
Polish
9085
Zulu
7282
Croatian
37
I
8 Cambridge Audio
Technical specifications
65180
Both models
Disc types
Blu-ray (BD) including BD-3D, DVD-Video,
DVD-Audio, AVCHD, SACD, CD, HDCD,
Kodak Picture CD, CD-R/RW, DVD±R/RW,
DVD±R DL, BD-R/RE
Architecture
BD-ROM Version 2 Profile 2
(also compatible with Profile 1 Version 1.0
and 1.1}
THD+N@1kHz
< 0 .001%
THD+N 20Hz-20kHz
< 0 .007%
IMD 19/20kHz
< 0 .001%
Mediatek MTK8530
S/N ratio
>-108dB
Video Scaler
Marvell DE2750 QDEO Video Scaler (on
Primary output
Crosstalk @ 1kHz
>-80dB
Internal Storage
1GB (Actual available storage varies due
to system usage}
Total Correlated Jitter
< 350pS
External Storage
2 x USB 2.0, 1 x e-Sata
Analogue audio outputs
7.1 RCA/Phono
Can be set for Stereo, 5.1 or 7.1 output
BD Profile
Architecture
Decoder
Analogue video outputs
Composite Video (CVBS}
Component (YCbCr/YPbPr}
Video Frame Rates
24Hz/50H/60Hz
Video Decoding
MPEG2, MPEG2 HD, MPEG4, MPEG4 AVC,
VC-1, XviD, VCD, AVCHD, MPEG ISO, AVI,
VOB, MKV (4.1), JPEG, JPEG HD
HDMI outputs (1.4a) x2
Video
NTSC: 480ijp, 720p, 1080ijp, 1080p24,
PAL: 576ijp, 720p, 1080ijp, 1080p24
Audio
Stereo, up to 7.1ch high-resolution PCM,
up to 5.1ch DSD, bitstream or decoding to
PCM of Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, DTS-HD High
Resolution Audio, and DT5-HD Master
Audio.
Composite Video
1.0V p-p (75 0)
Component Video
Y: 1.0V p-p (75 0}
Cb/Cr: 0 .7V p-p (75 0}
Pb/Pr: 0 .7V p-p (75 0)
Ethernet
100BASE-T
IR Emitter In
3 .5mm mini jack, isolated, modulated
PSU
Universal switch-mode 100 - 240V AC,
IEC inlet
Max power consumption
35W
Standby consumption
<0.5W
Dimensions (H x W x D)
85 x 430 x 312mm
(3.3 x 16.9 x 12.3") with feet
Weight (unboxed)
5 .0kg (11.01bs)
38
DACs
Cirrus Logic CS4382A 8 channel
multi-dac
75180
Architecture
Upsampler
DACs
Analog Devices ADSP-21261 32 bit
SHARC® DSP running Anagram
TechnologiesTM Q5 up-sampling
to 24 biV192kHz (All 10 channels}
5 x Wolfson WM8740 24/192kHz
Digital to Analog converters
Analogue audio outputs
Dedicated stereo RCA/Phono
THD+N @1kHz
<0.001%
THD+N 20Hz-20kHz
< 0 .003%
IMD 19/20KHz
< 0 .0002%
S/N Ratio
> -108dB
Crosstalk @ 1kHz
>-100dB
Total Correlated Jitter
< 50pS
WI-FI
802.11 b/g/n via supplied dongle.
Cambridge Audio's policy is one of continuous improvement. Design
and specifications are therefore subject to change without prior notice.
azur
651/75180
Troubleshooting
I
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
The disc type is not supported by this unit.
Check its region and type.
Functions on some discs may not work on this unit. This is not a
malfunction of the player.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
Check if the output has been set incorrectly to Bitstream or LPCM.
The disc is skipping
Check that the disc is not too scratched or dirty.
Ensure that the 651/751BD is on a firm surface and not subject to
vibrations.
A low hum or buzz sound can be heard
Power cords or lighting placed near this product.
Analogue inputs not connected securely.
No sound from the rear speakers
Source being played is not recorded in surround-sound.
Unit has been put to stereo or other down-mix mode.
No sound from the centre speaker
A stereo mode has been selected.
Remote control Is not working
The batteries are flat.
The remote is too far from the unit or out of the effective range.
Files on a connected USB device do not play
If the USB drive is incompatible, or the player encounters errors while
reading the USB drive or flash memory card, the screen displays 'Device
Error". In this case please verify that the USB drive is compatible, and try
to unplug the device and re-insert again.
In some cases, an incompatible USB device may cause the 651/751BD
to stop responding. If this occurs simply turn off the power, remove the
USB device, and turn the player back on.
The file type is incompatible (i.e. AAC). Check the supported file types.
The drive requires too much power from the USB socket.
Problems using HDMI
Ensure that your screen supports HDCP (High-Definition Copy Protection).
Ensure your screen is capable of displaying the resolution being output
by the Blu-ray player.
Note: Cables which run over 5m may cause sync or grounding issues.
For more frequently asked questions (FAQs}, technical advice and
information on getting the most out of your 651/751BD, please visit the
Support section on Cambridge Audio's website:
www.cambridgeaudio.com/ support.php
39
Cambridge Audio is a brand of Audio Part nership Pic
Registered Office: Gallery Court, Hankey Pl ace
London SE1 488, United Kingdom
Registered in England No. 2953313
www.cambrldge-audio.com
© 2011 Cambridge Audio Ltd