IP Link® Device Interface
Communication Sheet
epsn_1_6585_3.pke
Revision: 4/17/2014
This document provides additional assistance with wiring your Extron IP Link enabled product to your device.
Different components may require a different wiring scheme than those listed below.
For complete operating instructions, refer to the user's manual for the specific Extron IP Link enabled product or
the controlled device manufacturer supplied documentation.
Device Specifications:
Device Type:
Manufacturer:
Firmware Version:
Model(s):
Video Projector
Epson
N/A
Powerlite 965, Powerlite 97, Powerlite 98
Version History:
Driver
Version
Date
IP Link
Compiler
GC
Version
Notes
Added Device Note about enabling communication
on the projector. Extron Certified Version.
Tested on Powerlite 97.
3
4/15/2014
1.6.0
3.5.2
2
2/11/2014
1.6.0
3.5.1
Added Powerlite 98 and Powerlite 965 model.
Extron Certified Version. Tested on Powerlite 97.
1
5/21/2013
1.6.0
3.5.0
Extron Certified Version.
Tested on Powerlite 97.
Driver Notes:
Page 1 of 5
IP Link® Device Interface
Communication Sheet
epsn_1_6585_3.pke
Revision: 4/17/2014
Control Commands & States:
Aspect Ratio
Auto
4:3
AV Mute
On
Off
Closed Caption
CC1
CC2
Freeze
On
Off
Input
HDMI1
S-Video
Video
USB
USB Display
Computer 1
Computer 2
Lamp Mode
Normal
Eco
Power Control
On
Off
Volume (Discrete)
0 to 20 in steps of 1
Page 2 of 5
16:9
Off
IP Link® Device Interface
Communication Sheet
epsn_1_6585_3.pke
Revision: 4/17/2014
Status Available:
Aspect Ratio
Auto
4:3
16:9
AV Mute
On
Off
Closed Caption
CC1
CC2
Connection Status
Connected
Disconnected
Device Status
Normal
Fan Error
Lamp Burnt-out
Internal temperature is
abnormally high
Lamp Error
Lamp Cover Error
Off
Status Unavailable
Freeze
On
Off
Input
HDMI1
S-Video
Video
USB
USB Display
Computer 1
Computer 2
Lamp Mode
Normal
Lamp Usage
Hours
Power Control
On
Off
Power Status
On
Off
Warming Up
Status Unavailable
Volume (Discrete)
Eco
0 to 20 in steps of 1
Page 3 of 5
Cooling Down
IP Link® Device Interface
Communication Sheet
epsn_1_6585_3.pke
Revision: 4/17/2014
MLC60 Series Supported Commands:
Aspect Ratio
Auto
4:3
AV Mute
On
Off
Closed Caption
CC1
CC2
Freeze
On
Off
Input
HDMI1
S-Video
Video
USB
USB Display
Computer 1
Computer 2
Lamp Mode
Normal
Eco
Power Control
On
Off
Volume (Discrete)
0 to 20 in steps of 1
Page 4 of 5
16:9
Off
epsn_1_6585_3.pke
IP Link® Device Interface
Communication Sheet
Revision: 4/17/2014
Cable and Adapter Requirements:
F/F RS-232 DB9 Straight Serial Cable
Notes for the Device:
In order for the Driver to obtain proper feedback from the projectors the user must open the on screen display menu,
enter into the ECO tab, select the Standby Mode option and change the parameter to Communication On.
Serial communication:
Port Type: RS-232
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Pin Assignments Diagram:
Note: Captive screw connector may also be used as a serial connection.
General Notes:
Page 5 of 5