w w w. v a l o r f i re p l a c e s . c o m
H4 SERIES
Contemporar y, Radiant Gas Fireplaces
THE VALOR H4
Integrating contemporary design with efficient Valor heat, the H4 is one of our most
versatile fireplaces to date. Choose from two different backing plates (landscape or square)
and one of three designer bezel window trims in copper, nickel or black.
VALORSTAT PLUS REMOTE CONTROL (STANDARD FEATURE)
The ValorStat Plus Remote Control gives you the power to
select, adjust and program the desired temperature that you
want. Timer and Thermostat modes help save energy and
lower your overall home heating costs.
Pilot On Demand: The ValorStat Plus also has the ability to
turn your pilot light ON and OFF from the handheld remote
for years of additional energy savings.
Spread the Warmth
WITH Efficient heat distribution
The source of Valor comfort - radiant heat - has been around since the beginning of time.
Like heat from the sun, our fireplaces are specifically designed to maximize radiant heat output.
By heating with a Valor, you effectively warm the most frequented space in your home. This
concept is called zone heating, a proven method for cutting home fuel consumption.
Turn down your furnace and save in comfort.
VALOR WALL SWITCH KIT
STANDARD FEATURE (Installation Optional)
Light the pilot, then simply adjust the flame to your desired comfort level all from one standard size switch. Fireplace control has never been so easy!
The wall switch works in conjunction with the ValorStat Plus handheld remote.
NO POWER, NO PROBLEM
Valor H4 shown with 662SSV Outer Square Surround (Vintage Iron) &
661BSC Inner Bezel Surround - Copper with 621VRL Valor Red Brick & Log Set
In the winter time a power failure can chill your home fast. Valor Radiant Gas Fireplaces are
fully functional heaters that don’t require electricity (AC) for steady, efficient operation.
Our fireplaces provide the perfect mixture of radiant and convective heat eliminating the
need for a noisy, inefficient fan.
To learn more please visit www.valorfireplaces.com.
Valor H4 650IR shown with 662SSV Outer Square Surround (Vintage Iron) & 661BSC Inner Bezel Surround
w w w. va l o r f i re p l a c e s . c o m
1.
4.
2.
5.
3.
Valor H4 shown with 660LSV Outer Landscape Surround (Vintage Iron) &
661BSP Inner Bezel Surround - Brushed Nickel with 620FBL Black Fluted
Liner & 761DRK Decorative Rock Kit Accessory
Shown with 761DRK Decorative Rock Kit Accessory
6.
1. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSN Inner Bezel Surround
- Nickel Powder Coat with 620FBL Black Fluted Liner & Creekside Fuel Bed
4. 662SSV Outer Square Surround (Vintage Iron) & 661BSC Inner
Bezel Surround - Copper with 622LSL Ledgestone Liner & Log Set
2. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSB Inner
Bezel Surround - Black with 618EBL Enamel Black Liner & Log Set
5. 662SSV Outer Square Surround (Vintage Iron) & 661BSP Inner Bezel Surround
- Brushed Nickel with 620FBL Black Fluted Liner & Creekside Fuel Bed
3. 660LSV Outer Landscape Surround (Vintage Iron) & 661BSC Inner Bezel
Surround - Copper with 620FBL Black Fluted Liner & Creekside Fuel Bed
6. 662SSV Outer Square Surround (Vintage Iron) & 661BSB Inner
Bezel Surround - Black with 621VRL Valor Red Liner & Log Set
Manufactured by:
Bottom of
appliance
Min. 1/2” (13 mm) air gap
Miles
between surface of finished
hearth or floor and the
Industries
bottom of appliance Ltd.
1
661BSN
NOTE: Appliance requires a MINIMUM of 1/2” (13 mm) space
Please Note: When building
NOTE: Appliance
requires a MINIMUM
of 1/2”
(13 mm)
to floor/hearth
in front for
air flow.
Raisespace
the appliance accordingly.
to floor/hearth in front for air flow. Raise the appliance accordingly.
your H4, you must select one
Outer Surround as well as
one Inner Bezel Surround.
Inner Bezel Surround - Nickel Powder Coat
New Look. New Technology.
Miles of Experience.
Hearth
All product information is accurate at time of printing
and is subject to change. Please Note: Printed images
may vary from actual product. To guarantee you have
selected the correct product for your home, visit your
local Valor dealer. There you will find live burning units
that perfectly match the fireplace you have in mind.
16” (406 mm)
pay-off
Inneris
Bezelsuperior
Surround - Brushed Nickel
room comfort,
551DVK
Directlower
Vent Kitoper- sidewall vent terminal
ating costsCo-linear
and a Adapter
fireside
556CLA
- converts co-axial vent to 2 x 3” vent liners (insert)
ambiance
559CLT
that
is timeless.
Co-linear
Terminal - chimney liner termination cap (for use with 556CLA)
LP to Natural Gas Conversion Kit
755CFK
Circulating Fan Kit - variable speed, thermally activated
761DRK
Optional Decorative Rock Kit Accessory
817VAK
Vent Adapter Kit - Simpson DuraVent
835TG
Terminal Guard for 551DVK (required item in certain app. see install manual)
Fuel
Max. Input Min. Input
w w w. m ilesfireplaces.com
BTU/hr
BTU/hr
650ILN(Log) / IRN (Rock)
NG
24,000
6,500
650ILP(Log) / IRP (Rock)
LPG
24,000
13,000
AFUE++
Stand-off
36”
(914 mm)
38-3/4” (984
mm) to underside of
min.
header and cavity height
Stand-off
Mantel
Stand-off
Max. Output**
(w/out fan) BTU/hr
30-3/4” (768 mm)
to wall finish
Combustible framing
allowed beneath fireplace.
When the appliance is
610FVI DoubleDoor
FenderFire
installed
directly on Front
or other
with 614CVI carpeting,
Arched tile
Cast
Surround
combustible material
other than wood
flooring, the appliance
shall be installed on a
metal or wood panel
extending the
full width and recessed
depth of the appliance
A70.9%Va l o r70.6%G a s 17,506
Fireplace Collection
70.9%
70.6%
26-3/4” (679 mm)
MINIMUM
3/4” (19 mm)
from finished
wall surface
to front of
appliance
32-3/16” (817
mm)Wall Finish
Combustible
EnerGuide
Rating**
38-5/8” (981 mm)
23-1/8” (587 mm)
to rear vent center
9” (229 mm)
From finished
wall surface
to top vent
...a fireplace worth coming home to.
Miles
16”
(406 mm)
3” (76 mm) min.
To side wall from
inner frame in front
of the appliance
607NGK
by
MODEL/FUEL
16”
(406 mm)
26-3/4” (679 mm)
is Valor
powered
by a
Red Liner
direct-vent Ledgestone
engineLinerwith
622LSL
advanced
features
incorpo660LSV
Outer Landscape
Surround (31-5/8”h X 44-3/4”w)
rating decades
of experi662SSV
Outer Square
Surround (31-3/16”h X 36-3/4”w)
ence as innovators
within - Black
661BSB
Inner Bezel Surround
the
industry.
661BSC
Inner Bezel Surround - Copper
23-1/8” (587 mm)
to rear vent center
fronts
621VRL
Stand-off
Stand-off
29-3/4” (756 mm)
LINERS
SURROUNDS
exquisitely Black
designed
fire
620FBL
Fluted Liner
P l e a s e r e f e r to t h e c o m p l e t e H 4 ( 6 5 0 I ) p ro d u c t m a n ua l b e f o r e i n s ta l l at i o n
Model
Mantel
Mantel
17,506
A b o u t O u r E fficienc y R at ings - All Valor product literature is published using recognized Canadian and US
government test methods for determining energy efficiency performance. This ensures our products will perform in your home as
rated. Beware of misleading “steady state” efficiency claims made by manufacturers using their own “in-house” test methods. Examples
include alterations to venting and installation restrictions that produce false ratings. Visit valorfireplaces.com for more information.
”
33
m)
MINIMUM 1/2” (13 mm) space
between bottom of appliance
and surface of hearth or
floor finish
8m
(83
NOTE: Appliance requires a MINIMUM of 1/2” (13 mm) space
to floor/hearth in front for air flow. Raise the
appliance accordingly.
16” (406 mm) min. straight out
16”
(406 mm)
or off the top venting.
Allow for elbow if rear vent with rise.
FRAMING DIMENSIONS
Designed and manufactured by/for:
Copyright Miles Industries Ltd. 2010
Proudly Made in North America
Printed on recycled paper
23-1/8” (587 mm)
to rear vent center
FRAMING DETAIL
Every one ofEnamel
our unique
and(Reflective)
618EBL
Black Liner
The
661BSP
36”
(914 mm)
min.
36”
(914 mm)
min.
Direct Vent H4 Engine LPG (Creekside Rock Set )
29-3/4” (756 mm)
The maximum
vertical vent run
on a Valor H4 can
not exceed 40 feet
in total length.
The H4 can be
both top and
rear vented.
OPTIONAL KITS
SIDE WALL
TERMINATION
Printed in Canada 04/05
ROOF
TERMINATION
POSSIBLE VENTING OPTIONS
Co-Axial
(New Chimney)
650IRP
At the end of the day...
30-3/4” (781 mm)
(Existing Chimney)
32-3/16” (817 mm)
32-3/16” (817 mm)
Stand-off
Stand-off
FRAMING DIMENSIONS
30-3/4” (781 mm)
Co-Linear
appliance
PRODUCT DIMENSIONS
30-3/4” (781 mm)
ENGINES
Vintage Iron Finish
appliance
3” (76 mm) min.
3” (76 mm) min.
To side wall from
To side wall from
inner frame in front
inner frame inof
front
the appliance
of the appliance
29-3/4” (756 mm)
VENTING OPTIONS
ote: Diagrams for
e only. For further
on details, call your
r or visit our website
lesfireplaces.com.
Outlet
Vent
new home or remodeling an
older one, an energy efficiFIREPLACE
ant Valor COMPONENTS
Gas Fireplace is a
wise
investment
that
will NG (Log Set)
650ILN
Direct Vent
H4 Engine
pay dividends
to LPG (Log Set )
650ILP
Directfor
Ventyears
H4 Engine
follow.
650IRN
Direct Vent H4 Engine NG (Creekside Rock Set)