CYP CH-527TXVBD Operation Manual

CH-527TXVBD
4K UHD+ HDMI over HDBaseT Transmitter
with Bi-directional 24V PoC
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
•
Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REV.
DATE
SUMMARY OF CHANGE
VS1
2018/12/22
Final technical review
CONTENTS
1. Introduction������������������������������������������������������1
2. Applications�����������������������������������������������������1
3. Package Contents������������������������������������������1
4. System Requirements��������������������������������������2
5. Features������������������������������������������������������������2
6. Operation Controls and Functions�����������������3
6.1 Front Panel������������������������������������������������� 3
6.2 Rear Panel�������������������������������������������������� 4
6.3 IR Cable Pinouts���������������������������������������� 5
6.4 RS-232 Bypass Pinout��������������������������������� 5
7. Connection Diagram��������������������������������������6
8. Specifications��������������������������������������������������7
8.1 Basic Specifications���������������������������������� 7
8.2 Video Specifications��������������������������������� 8
8.3 Audio Specifications��������������������������������� 9
8.4 Cable Specifications������������������������������ 10
8.5 HDBaseT Features������������������������������������ 11
9. Acronyms�������������������������������������������������������12
1. INTRODUCTION
This HDMI over HDBaseT Transmitter is a great solution for extending
UHD video and audio as well as Ethernet and control via a single run
of Cat.5e/6/7 cable over distances up to 100 meters. This extender
complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as
well as supporting the legacy HDCP 1.x and HDMI 1.x standards. In
addition, despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD
HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as
well as 10/12-bit sources with HDR, are able to be processed and
extended by the use of AVLC (Adaptive Visually Lossless Compression)
when needed. Multiple data and control interfaces are also able to
be extended, including IR, RS-232, and LAN connections.
This unit supports bi-directional 24V PoC (Power over Cable) allowing
the system to be completely powered by, or provide power to, a
compatible connected Receiver, allowing for greater flexibility within
different installation scenarios.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1×HDMI to HDBaseT Transmitter with Bi-directional 24V PoC
• 1×24V/1.25A DC Power Adapter
• 1×2-pin Terminal Block
• 1×3.5mm to IR Blaster Cable
• 1×Operation Manual
1
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
• An HDBaseT Receiver equipped with AVLC and 24V PoC support is
strongly recommended.
• The use of “Premium High Speed” HDMI cables, and industry
standard Cat.6, Cat.6a or Cat.7, is highly recommended.
5. FEATURES
• HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
• HDCP 1.x and HDCP 2.2 compliant
• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
• Supports Deep Color input and output up to 12-bit
• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
• Supports CEC bypass
• HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,
24V PoC and Control (bi-directional IR/RS-232 pass-through)
• HDBaseT output transmits video, audio and data over a single
Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K
when using Cat.6a/7
• Integrated AVLC (Adaptive Visually Lossless Compression) activates
when the bandwidth requirements of the source are beyond
10.2Gbps (340MHz) allowing for support of sources up to 18Gbps
(600MHz) with no loss of visual quality
• Supports pass-through of many audio formats including LPCM
2.0/5.1/7.1, Bitstream, and HD Bitstream
• Bi-directional 24V PoC allows the unit to be powered by, or provide
power to, a compatible connected Receiver
Note: The 24V PoC function is designed to power, or receive power
from, compatible Receiver units only. Non-PoC Receivers will need
their own power supply. Other brands of Receiver may not be
compatible.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
UPDATE
ISP
STD
RS-232
LAN
SYNC
1
2
3
4
5
1 ISP Pinhole: This button is reserved for factory use only.
2 STD/UPDATE Switch: This switch is reserved for factory use only.
Note: This should be left on the default setting of “STD” for normal
operation.
3 RS-232 Port: Connect to a PC, laptop, or serial controllable device
for the extension of RS-232 signals between both ends of the
HDBaseT connection.
4 LAN Port: Connect to an Ethernet supporting device or to your
local network, as appropriate, to extend the network to both ends
of the HDBaseT connection.
5 POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
SYNC LED: This LED will illuminate when a live input source is
detected.
3
6.2 Rear Panel
- +
DC 24V
1
IR
IR
CAT5e/6/7
BLASTER EXTENDER
OUT
2
3
4
HDMI IN
5
1 DC 24V Terminal Block: Plug the 24V DC power adapter into this
terminal block and connect it to an AC wall outlet for power.
(Optional)
Note: This connection is not required if the unit is receiving power
via 24V PoC from the Receiver.
2 IR BLASTER Port: Connect to the provided IR Blaster to transmit IR
signals from the other end of the HDBaseT connection to devices
within direct line-of-sight of the IR Blaster.
3 IR EXTENDER Port: Connect to an IR Extender to receive IR control
signals and extend them to devices connected to the other end
of the HDBaseT connection. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
4 CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver
with a single Cat.5e/6/7 cable for transmission of all data signals.
24V PoC can also be supplied to, or received from, a connected
compatible Receiver.
Note: The 24V PoC function is designed to power, or receive
power from, compatible Receiver units only. Non-PoC Receivers
will need their own power supply. Other brands of Receiver may
not be compatible.
5 HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
4
6.3 IR Cable Pinouts
IR Extender
Cable
IR Blaster
Cable
1 Power
2 Infrared
3 Not Used
6.4 RS-232 Bypass Pinout
DCD
RxD
TxD
DTR
GND
1
2
3
4
5
RI
CTS
RTS
DSR
9
8
7
6
DE-9 Female Port
5
1 Infrared
2 Power
3 Ground
7. CONNECTION DIAGRAM
Media Player
RS-232 Equipped
PC
HDMI
Input
Network
Switch
1.5m
60°
LAN
RS-232
3m
7m
3m
60°
Tx
POWER
UPDATE
ISP
STD
LAN
RS-232
SYNC
- +
Power Supply
DC 24V
IR
IR
CAT5e/6/7
BLASTER EXTENDER
OUT
HDMI IN
IR Input &
Output
Cat.5e/6/7
Cable
IR Input &
Output
- +
DC 24V
Rx
ISP
STD
IR
IR
CAT5e/6/7
BLASTER EXTENDER
IN
HDMI OUT
POWER
UPDATE
RS-232
LAN
SYNC
RS-232
60°
3m
RS-232 Controlled
Device
7m
LAN
3m
60°
HDMI
Output
1.5m
UHDTV
6
8. SPECIFICATIONS
8.1 Basic Specifications
HDMI Bandwidth
600MHz/18Gbps
HDBaseT Bandwidth
340MHz/10.2Gbps
Input Port
1×HDMI
Output Port
1×HDBaseT (RJ-45)
Pass-through Ports
1×IR Extender (3.5mm)
1×IR Blaster (3.5mm)
1×RS-232 (DE-9)
1×LAN (RJ-45)
IR Frequency
30 – 50kHz (30 – 60kHz under ideal
conditions)
Baud Rate
Up to 115200
Power Supply
24V/1.25A DC (US/EU standards, CE/FCC/
UL certified)
ESD Protection
Human Body Model
±8kV (Air Discharge),
±4kV (Contact Discharge)
Dimensions
102mm×25mm×107.5mm
(W×H×D) [Case Only]
102mm×25mm×115mm
(W×H×D) [All Inclusive]
Weight
252g
Chassis Material
Metal (Steel)
Chassis Color
Black
Operating Temperature
0˚C – 40˚C/32˚F – 104˚F
Storage Temperature
-20˚C – 60˚C/-4˚F – 140˚F
Relative Humidity
20 – 90% RH (Non-condensing)
Power Consumption
16.3W (Tx+Rx)
7
8.2 Video Specifications
Input
Output
HDMI
HDBT
720×400p@70/85


640×480p@60/72/75/85


720×480i@60


720×480p@60


720×576i@50


720×576p@50


800×600p@56/60/72/75/85


848×480p@60


1024×768p@60/70/75/85


1152×864p@75


1280×720p@50/60


1280×768p@60RB/60/75/85


1280×800p@60RB/60/75/85


1280×960p@60/85


1280×1024p@60/75/85


1360×768p@60


1366×768p@60RB/60


1400×1050p@60RB/60


1440×900p@60RB/60/75


1600×900p@60RB


1600×1200p@60


1680×1050p@60RB/60


1920×1080i@50/60


1920×1080p@24/25/30


1920×1080p@50/60


Supported Resolutions (Hz)
8
Input
Output
HDMI
HDBT
1920×1200p@60RB


2560×1440p@60RB


2560×1600p@60RB


2048×1080p@24/25/30


2048×1080p@50/60


3840×2160p@24/25/30


3840×2160p@50/60 (4:2:0)


3840×2160p@24/25/30, HDR10

AVLC
3840×2160p@50/60 (4:2:0), HDR10

AVLC
3840×2160p@50/60

AVLC
4096×2160p@24/25/30


4096×2160p@50/60 (4:2:0)


4096×2160p@24/25/30, HDR10


4096×2160p@50/60 (4:2:0), HDR10


4096×2160p@50/60


Supported Resolutions (Hz)
8.3 Audio Specifications
HDMI Input/Output
LPCM
Max Channels
8 Channels
Sampling Rate (kHz)
32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats
9
Standard & High-Definition
8.4 Cable Specifications
1080p
Cable Length
4K30
4K60
8-bit
12-bit
(4:4:4)
8-bit
(4:4:4)
8-bit
10m
5m
5m
3m
High Speed HDMI Cable
HDMI Input
Ethernet Cable
Cat.5e/6
100m
70m
Cat.6a/7
100m
100m
• 1080p (FHD Video)
-- Up to 1080p@60Hz, 12-bit color
-- Data rates lower than 5.3Gbps or below 225MHz TMDS clock
• 4K30 (UHD Video)
-- 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit color
-- 4K@50/60Hz (4:4:4, 8-bit) with AVLC active
-- Data rates higher than 5.3Gbps or above 225MHz TMDS clock but
below 10.2Gbps
• 4K60 (UHD+ Video)
-- 4K@50/60Hz (4:4:4, 8-bit), AVLC required over HDBaseT
-- 4K@50/60Hz (4:2:0, 10-bit HDR), AVLC required over HDBaseT
-- Data rates higher than 10.2Gbps
10
8.5 HDBaseT Features
HDBaseT Feature Set
Video & Audio
Supported
IR Pass-through
Supported
RS-232 Pass-through
Supported
Accept power from Receiver
Supported
Send power to Receiver
Supported
LAN Pass-through
Supported
11
9. ACRONYMS
ACRONYM
COMPLETE TERM
AV
Audio/Video
AVLC
Adaptive Visually Lossless Compression
Cat.5e
Enhanced Category 5 cable
Cat.6
Category 6 cable
Cat.6a
Augmented Category 6 cable
Cat.7
Category 7 cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
EDID
Extended Display Identification Data
HD
High-Definition
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
HDR
High Dynamic Range
HDTV
High-Definition Television
IP
Internet Protocol
IR
Infrared
LAN
Local Area Network
LED
Light-Emitting Diode
LPCM
Linear Pulse-Code Modulation
PC
Personal Computer
PD
Powered Device
PoC
Power over Cable
PSE
Power Sourcing Equipment
UHD
Ultra-High-Definition
UHD+
Ultra-High-Definition Plus
UHDTV
Ultra-High-Definition Television
12
CYPRESS TECHNOLOGY CO., LTD.
www.cypress.com.tw