1 Verify kit contents a Verify that your kit contains one each of the following components: Shift Software CD Quick Start Guide Digi CM 32 (shown) RJ-45 cable Power supply DB-9F console DB-9M modem adapter adapter Digi CM™ RJ-45 diagnostic loop back DB-25F console adapter DB-25M modem adapter PN 90000300_E 2 brackets A free hard copy of the User Guide can be ordered at: www.digi.com/csuserguide a 2 Connect hardware a b c Connect Ethernet cable Digi CM Connect power supply From the CD, run the Advance Device Discovery Protocol application to locate the Digi CM on the network. In firmware 1.8 and greater, the CM has SNMP, SSHv1, and Telnet to the command line disabled by default, and http is automatically redirected to https. To perform initial device configuration, use the discovery tool on the CD (also available from the Digi website) or use our straight-thru serial cable with the appropriate adapter to the CM console port, https, or SSHv2. Are you a POWER USER? Use the configuration menu: 1. Establish a serial connection through the console port (9600, 8, N, 1). 2. Login as root and password dbps. 3. Type the command configmenu. Select option 1 - Network Configuration and follow the prompts. 4. Enter the IP address in the URL address bar of your browser and go to step 4 - Test Configuration. Switch power on 4 Test configuration a 3 Assign network settings Insert RJ-45 diagnostic loop into Port# 1 Digi CM d Log in to port 1 Username: root Password: dbps Verify your connection to the port by typing some text. If the text appears correctly on the screen the configuration is correct. Click Close to exit port. b Enter, User ID: root Password: dbps c e Congratulations! You have successfully installed your Digi CM. Configure the device for your application using your browser. To get back to your Digi CM after your initial configuration, enter the IP address in the URL address bar and log in. Use the navigation bar on the left to alter your configuration. Below is a list of available adapters and part numbers. Connection On the left navigation bar, click Serial Port > Connection> Port Title # Adapters (in quantities of 8) Order # Application DB-9M Modem adapter 76000702 DCE devices such as modems with DB9 female ports DB-9F Console adapter 76000671 Bay Accelar, Nortel and other DB-9 DTE DB-25F Console adapter 76000673 DTE devices with DB-25 male ports DB-25M Modem adapter 76000670 DCE devices such as modems DB-25M Console adapter 76000672 Sun SPARC and other DTE devices with DB-25 female ports © Digi International, Inc., 2011 Digi, Digi International, Digi CM and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.