Activity Tracking Sensor
Add-on Device
Quickstart Guide
Model No. ADS1301
What’s inside:
1x Activity Tracking Sensor
All Home8 add-on devices have to work with Home8 systems.
English
Step 1: Assemble your device and accessories
1 . Unpack your device and accessories.
2. Pair the device with the Security Shuttle within 1-10 feet to make sure the connection
is working well.
3. Pull and remove the plastic strip to initiate battery contact of Activity Tracking Sensor.
1-10 ft
Stp 2: Add a device
1 . Open the Home8 app, tap on the menu button "
" and select “ Add Device ”.
2. Find QR Code on the device, scan the QR Code, follow the on-screen instructions.
3. Set Location, if you multiple systems, select the Location for the device to be added.
Note: If the scan is incomplete, you will be asked to enter the serial number (SN) of the device.
Before you mount your device, see if it's within Security Shuttle’s range.
1 . Take your device to the room you want to use it in.
2. Give your Activity Tracking Sensor a good shake, then navigate to
> Device
Management > Activity Sensor on your mobile app. The time stamp will be
updated if your tracker is in range.
Place the Activity Tracking Sensor
Stick on the refrigerator door, bathroom door, or even microwave door to track daily
activities without disturbing the user.
English
Step 3: Mount your device
FAQ
How can I backup recorded video?
You can backup your recorded video by using any of the following methods.
- By setting automatic backup to Dropbox. (Dropbox account needed)
- By sharing your recorded video from VideoGram to your appointed method.
How do I retrieve my Home8 Mobile app password?
Go to the sign-in page of your Home8 app and tap "Forgot password?". Follow the instruction on
screen to enter your phone number. You will then receive an access code via SMS. After input an
Access Code that app requested, you can then reset the password by yourself. You will also receive
a confirmation email after successfully reset your password.
How can I be certain my personal information is secured?
Our first level of security is authentication and your password is encrypted when you sign in to your
account. At the next level where all data is transmitted, including videos, images, as well account
information, bank-level AES data encryption is used.
How can I be sure unauthorized people are unable to look at my videos on the cloud?
With your privacy in mind, all data is encrypted with bank-level security, and each user has his/her
own account to access the video. Our system alerts you and your authorized users when it detects
login attempts from unauthorized smart devices.
How many locations can I manage from my Home8 app?
Home8 app is built to support multi-location management. You can manage as many locations as
you would like, and we do not place a limit on the number of Home8 Systems you can purchase.
We recommend you to change your password as soon as possible by using other smart device with
Home8 App installed to sign in to your account to make the change to your password. Alternatively,
you may also contact us to disable your account for you.
Is there a place I can view the user manual online?
Yes, visit www.home8alarm.com/download , and then access user manuals.
What are the requirements prior to purchasing an Home8 System?
Because Home8 System is a fully IoT interactive system, it will require the following:
- Broadband Internet connection. (dial-up connections are not supported)
- DHCP-enabled router with an available LAN port.
- Smart devices with internet connection.
What can I do if a camera is offline?
If a camera is showing as “offline”, try power cycle on the camera first and wait approximately two
minutes, if the offline situation persists, try moving the camera closer to the Security Shuttle and
power cycle the device again. After tried the methods above, if the offline status is still not resolved,
please contact our Technical Support for further troubleshooting assistance.
What can I do if my system is offline?
First, try checking your internet connection, if the connection is working properly, then unplug the
network cable from your Security Shuttle for 10 seconds, and then reconnect it. If the Security Shuttle
is still offline after 5 minutes, please contact our Technical Support for further troubleshooting
assistance.
FAQ
If I lose my smart device, what should I do to protect my Home8 account?
Troubleshooting Tips
Are your devices listed in your app?
If you’re having trouble installing your devices, see if they’re listed in your Home8 app:
> Device Management to see if all your devices are listed
• Navigate to
• Tap Add Device from the Side Menu and follow the on-screen instructions to add any missing devices
Are your devices communicating with Security Shuttle?
• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s
closer to Security Shuttle and try again.
• If they do connect, you’ll know the range of your device and where to install a range extender.
• Alternatively, you can move Security Shuttle closer to your device.
• If your devices still don’t communicate with Security Shuttle, not listed, even when they’re in the same room,
navigate to
> Add Device on the Home8 app to add your devices again.
Need help installing your Home8 system?
Visit our FAQ page: http://www.home8alarm.com/faq/
User Manuals: http://www.home8alarm.com/manuals/
Call us at 1-844-800-6482
Email us at [email protected]
V1.0
">
