Wells | SS-206ED | SS-206E (D)

W E L L S M A N U FA C T U R I N G
ITEM NO.
Wells SS-206E Built-In Rectangular Food Warmer
is designed for bottom mount installation. This
dependable and practical unit is made with a
heavy-duty stainless steel warming pan and is
available with or without a drain. It will accommodate
a standard 12” x 20” inset pan up to 6” deep. Warmers
are available with infinite or thermostatic controls.
SS-206E
Features
• 12” x 20” standard pan easily adapts to
a variety of fractional or round pans up to
6” deep.
• Warming pan is deep-drawn, stainless steel
for maximum strength and durability.
Accessories / Options
Adapter Top, to convert SS-206E to hold two
7-quart insets, 20176
Adapter Top, to convert SS-206E to hold two
4-quart insets and two 2 1/2-quart insets, 20434
Adapter Top, to convert SS-206E to hold one
7-quart and one 11-quart inset, 21621
Adapter Top, to convert SS-206E to hold
three 4-quart insets, 21615
Adapter Top, to convert SS-206E to hold four
2 1/2-quart insets, 21624
Adapter Top, to convert SS-206E to hold one
4-quart and one 7-quart inset, 21617
Inset, 2 1/2-quart capacity with lid, 20773
• The tubular element, located under the food
well, allows for quick heating.
• The positive-off thermostat (ET, ETD)
controls the element allowing for adjustable
and more consistent temperatures.
• Infinite control (E, ED) is available on all
models. A high limit switch prevents
accidental overheating.
• Models are available with optional drain (D).
• Warmer is designed for wet or dry operation.
• The SS-206E Warmer is Underwriters
Laboratories, Inc. Recognized and meets NSF
International standards.
• A one-year warranty against defects covers
parts and labor.
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Specifications
Inset, 11-quart capacity with lid, 20908
Individual drain (D), available on all models
Drain Valve Extension Kit, extension from
drain to counter front with remote handle, for
use with “D” models only, 20385
Individual thermostat (T), available on all models
Overall Dimensions:
Width
Depth
Temperature Settings:
Weights:
Installed
Shipping
Inches
13 11/16
21 3/4
OFF/LO to HI
Lbs.
19
21
MM
348
552
KG
9
10
WELLS
R
A
I
S
I
N
G
T
H
E
S
T
A
N
D
A
R
D
SS-206E BUILT-IN BOTTOM MOUNT RECTANGULAR FOOD WARMER
SS-206E BUILT-IN BOTTOM MOUNT
RECTANGULAR FOOD WARMER
W E L L S M A N U FA C T U R I N G
MODEL
SS-206E
B U I LT- I N B O T T O M M O U N T
R E C TA N G U L A R F O O D WA R M E R
R
R
STD.4
DIMENSIONS:
INCH
(MM)
SUGGESTED CLEARANCE REQUIRED FROM
UNIT TO THE NEAREST SURFACE
BACK
2
(51)
20 3/32
21 3/4
(510)
(552)
12 1/16
(306)
BOTTOM
6 3/4
(171)
FRONT
4 1/8
(105 )
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
2 5/8
(67)
13 11/16
SIDE
2
(51)
21 3/4
(552)
(348)
8 11/16
(221)
4 15/16
(125)
1/2 IN DRAIN NPT
(SS-206ED & ETD ONLY)
POWER SUPPLY LEADS
S S - 2 0 6 E E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS
VOLTS
WATTS
AMPS
PHASE
POWER SUPPLY CORD
SS-206E
120
1200
10.0
SINGLE
NONE
SS-206E
208
900
4.3
SINGLE
NONE
SS-206E
240
1200
5.0
SINGLE
NONE
All models with an 'ET', 'ED', or 'ETD' suffix have the same electrical specifications as the standard models.
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The installation of recognized component units requires additional
evaluations to Underwriters Laboratories, Inc. standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: (775) 345-0444 • FAX: (775) 345-0569
FOR ORDERS ONLY: (888) 356-5362 • FAX: (800) 356-5142 • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(K) • PART NO. 38842
WELLS
Download PDF