VTech | i6725 | I6725 Quick Start Guide

STEP 3 Battery installation
Quick Start Guide
i6725
1. Align the two holes in the plug with the socket pins,
then snap the plug into place. Place the battery in the
compartment with the wires in the upper right corner.
2. Replace cover by sliding it upwards until it clicks into
place.
STEP 5 Connect to phone line
Plug one end of the telephone line cord into the telephone line
jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.
NOTE:
For complete feature instructions, please refer to your
user’s manual.
IMPORTANT!
If your product is not working properly:
1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com or www
vtechcanada.com in Canada.
3. Call our customer service at 1-800-595-9511 or 1-800-267
7377 in Canada.
STEP 1 Check package contents
Make sure your phone’s packaging includes the following:
Charger power adaptor
Base power adaptor
Base unit
Telephone
line cord
Handsets (2)
Wall mount
bracket
Charger
Batteries (2)
Belt clips (2) Quick start User’s manual
guide
STEP 2 Connect power to telephone base/charger
Plug the power adaptor into an electrical outlet not controlled
by a wall switch, and the connector into the power jack on
bottom of the telephone base/charger.
STEP 4 Charge the battery
1. Place the handset in the base unit/charger.
2. Charge the battery for at least 16 hours before first use.
STEP 6 Making and receiving calls
Making a call
• Press TALK /FLASH or SPEAKER and listen for dial
tone.
• Dial the phone number.
-OR• Dial the phone number.
• Press TALK/FLASH.
Receiving a call
Press TALK/FLASH, SPEAKERPHONE, or any dialing key
except OFF.
NOTE:
• Use only the power adaptors supplied with your
VTech telephone.
Hanging up
Press OFF or place the handset in its
base/charger.
96-006081-010-000
Issue 0
Download PDF