Руководство по выбору антенн

Руководство по выбору антенн
Antenna Guide
Wireless LAN
Antennas of the BAT family
BAT Antenna Guide BAT
Release 06 03/2014
Technical Support
https://hirschmann-support.belden.eu.com
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2014 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the
enclosed CD/DVD applies.
The performance features described here are binding only if they have been expressly agreed
when the contract was made. This document was produced by Hirschmann Automation and
Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right
to change the contents of this document without prior notice. Hirschmann can give no guarantee
in respect of the correctness or accuracy of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site
(www.hirschmann.com).
Printed in Deutschland
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
BAT Antenna Guide
27.02.2014
Contents
Introduction
5
1
Current BAT portfolio
6
2
AP / Cable / Antenna assembly
8
3
Antenna Selection Criteria
9
4
External antennas
14
4.1
Legal regulations for operation external antennas
4.1.1 Relevant for use in the USA and in Canada:FCC
compliant antennas
4.1.2 Relevant for use in Japan:
14
4.2
4.3
4.4
4.5
14
15
Omni-Directional Antennas
4.2.1 Omni-Directional Antenna for 2.4 GHz band
4.2.2 Omnidirectional antenna for 5 GHz band
4.2.3 Omnidirectional Antenna for 2.4 and 5 GHz band
4.2.4 Omni-Directional Dualband Antenna for MiMo
4.2.5 Dual band Hemispherical Antenna for 2.4 and 5 GHz
band
16
16
17
18
22
Sector Antennas
4.3.1 Directional antenna for 2.4 GHz band with 14 dBi
gain
4.3.2 Polarization-diversity antenna for 5 GHz band, linear
4.3.3 Sectoral MiMoantenna for 5 GHz band
26
24
26
28
30
Directional Antennas
4.4.1 Directional antenna for 2.4 GHz band with 14 dBi
gain
4.4.2 Directional antenna for 5 GHz band with 18 dBi gain
4.4.3 Directional antenna for 2.4 GHz band and 5 GHz
band with 23 dBi gain
4.4.4 Directional antenna for 5 GHz band with 18 dBi gain
37
39
Radiating Cable Antennas (Leaky Cable)
4.5.1 Leaky Cable for 2.4 GHz; black
42
42
BAT Antenna Guide BAT
Release 06 03/2014
32
32
35
3
5
Cables/Adapter
46
6
Planning the network
52
A
Explanation of passive
antennas in explosive hazard
areas
53
B
Index
54
C
Further Support
55
4
BAT Antenna Guide BAT
Release 06 03/2014
Introduction
Since 2004, Hirschmann Automation and Control GmbH has provided a
continually expanding product portfolio relating to WLAN.
Our product portfolio comprises the following integral WLAN network
elements:
 active devices such as access points, and clients
 passive components such as cables, antennas, and overvoltage
protectors
With our product portfolio, we focus on a high industrial suitability. In order to
improve our products, in particular with regard to vibration resistance,
grounding behavior, impermeability and emission behavior, we have further
developed our antenna portfolio.
You benefit from the following modifications of our antenna portfolio:
 All antennas comply with the IP65 degree of protection for a high
industrial suitability. The sole exception to this is the BAT-ANT-N-14GIP23 antenna.
 The emission behavior of the new antennas is more homogeneous, with
improved transmit and receive power during operation.
 The new antennas, equipped with N sockets, allow you to connect the
antennas easily and quickly with other cables and overvoltage protectors.
 The scope of delivery comprises a complete solution, with the antenna, 1
yard of cable, and the pigtail included. The complete solution allows you
to immediately connect the antenna to the BAT-C, BAT-F, BAT-R, and
BAT54/300-Rail.
 You obtain every antenna with mounting material which is vibration
resistant, weatherproof, and sturdy.
We continually improve our product portfolio and include in the portfolio
WLAN technology innovations. As a result, our portfolio is subject to short
term changes. Check regularly for updates of our portfolio by visiting the
Hirschmann product pages (www.hirschmann.com).
BAT Antenna Guide BAT
Release 06 03/2014
5
1
Current BAT portfolio
In the following you get an overview of our devices. You also obtain
information on which WLAN standards the devices support.
 The products of the BAT54 family support the WLAN standards
IEEE 802.11a/b/g/h and can be operated with a gross data rate of up to
108 MBit/s.
 The products of the BAT300 family support the WLAN standards
IEEE 802.11a/b/g/h and 802.11n and can be operated with a gross data
rate of up to 300 MBit/s.
 The products of the OpenBAT family support the WLAN standards
IEEE 802.11a/b/d/g/h/n and can be operated with a gross data rate of up
to 450 MBit/s.
 The BAT-C products support the WLAN standards IEEE 802.11a/b/g/h/n
and can be operated with a gross data rate of up to 65 MBit/s.
6
BAT Antenna Guide BAT
Release 06 03/2014
BAT Antenna Guide BAT
Release 06 03/2014
BAT54/300-Rail
The devices are
supplied in metal
enclosures for mounting
on DIN rails in
automation or vehicle
applications.
BAT54/300-F
The devices are
supplied in IP65/67
metal housings. They
are designed for fieldlevel applications or
harsh industrial
environments.
BAT-F X2
The devices are
supplied with stainless
steel covers. They are
designed for hazardous
environments and are
approved for ATEX
zone 2.
BAT54-Rail
BAT54-F
BAT-F X2
BAT300-Rail
BAT300-F
Table 1:
BAT-F
The devices are
supplied in a metal
housing that can be
fastened to DIN rails
using automation
technology. They
provide impressive
flexibility and high
speeds.
BAT-F
BAT-R
The devices are
supplied in a metal
housing that can be
fastened to DIN rails
using automation
technology. They
provide impressive
flexibility and high
speeds.
BAT-R
BAT-Family: Overview
For further information, see the installation user manual for the corresponding device.
BAT-C
The devices are
supplied with an IP67
aluminum housing.
They are suitable for
use in an industrial
environment.
BAT-C
7
2
AP / Cable / Antenna assembly
Access Point
Optional
Protector
Pigtail
Optional
Cable
2 m, 5 m, 15 m
6.56. ft, 16.4 ft, 49.2 ft
Cable
1m
3.28 ft
Linear
antenna
BAT-F
OpenBAT-F
BAT-C
Dual Slant
antenna
BAT54/300-Rail
OpenBAT-R
MiMo
antenna
f-m
f-m
f-m
m-f
As every antenna set includes 1 yard of cable and a pigtail, you have the
option of immediately connecting both AP types BAT-F / BAT54/300-F/ BATC, and BAT-R/ BAT54/300-Rail to the antennas.
The BAT Protector can be screwed onto the BAT-F/ BAT54/300-F/ BAT-C
directly, or be connected between two cables, as it is equipped with a plug
and a socket.
8
BAT Antenna Guide BAT
Release 06 03/2014
3
Antenna Selection Criteria
 Take into account the national regulations that apply to the operation of
antennas before considering any other criteria.
See “Legal regulations for operation external antennas” on page 14.
Note: Hirschmann recommends that you perform an on-site inspection and
an analysis to prepare for the installation of a WLAN.
Typical antenna ranges, based on the frequency range and the antenna type:
 Frequency range: 2.4 GHz
– Short range: up to 218 yards (200 m) with omnidirectional antennas.
– Medium range: up to 0.62 miles (1 km) with sector antennas.
– Long range: up to 3.11 miles (5 km) with directional antennas.
 Frequency range: 5 GHz
– Short range: up to 328 yards (300 m) with omnidirectional antennas.
– Medium range: up to 1.86 miles (3 km) with sector antennas.
– Long range: up to 9.32 miles (15 km) with directional antennas.
The typical ranges provide orientation for the first-time antenna selection.
The actual antenna range depends on several factors such as output power,
line of sight, and interference.
You find detailed information on calculating the ranges under See “Planning
the network” on page 52.
In the following table you find antenna descriptions. Together with the above
described typical ranges, the descriptions provide orientation for the first-time
antenna selection.
BAT Antenna Guide BAT
Release 06 03/2014
9
10
Release 06 03/2014
BAT Antenna Guide BAT
Art.-No Antenna
Description
BAT-C
943 981- BAT-ANT002
N-6G-IP65
Omnidirectional
antenna for
2.4 GHz band
+++
BAT54 family
BAT54BAT54-F
Rail
+++
+++
943 981- BAT-ANT003
N-5A-IP65
Omnidirectional
antenna for
5 GHz band
+++
+++
+++
+
+
+
+
942 110- BAT-ANT001
N-3AGNIP67
Omnidirectional +
antenna for
2.4 GHz band
and 5 GHz band
-
+
-
+
-
+
942 046- BAT-ANT001
RSMA2AGN-R
Omnidirectional antenna for
2.4 GHz band
and 5 GHz band
+
-
+
-
+
-
943 981- BAT-ANT004
N-6ABGIP65
Hemispherical
+++
antenna for
2.4 GHz band
and 5 GHz band
+++
+++
+
+
+
+
Table 2:
+++ Very good; ++ Good; + Possible; - Not usable; nr not relevant
BAT300 family
OpenBAT family
BAT300BAT300-F BAT-R
BAT-F
Rail
+
+
+
+
BAT Antenna Guide BAT
Release 06 03/2014
Art.-No Antenna
Description
943 981- BAT-ANT005
N-14GIP23
Directional
+++
antenna for
2.4 GHz band
with 14 dBi gain
Directional
+++
antenna for
5 GHz band with
18 dBi gain
943 981- BAT-ANT006
N-18A-VIP65
943 981- BAT-ANT007
N-23A-VIP65
943 981- BAT-ANT008
N-23A-VHIP65
943 981- BAT-ANT014
N-MiMo18N-IP65
943 981- BAT-ANT009
N-8G-DSIP65
11
Table 2:
BAT-C
+
Directional
antenna for
5 GHz band with
a high gain of
23 dBi
Directional
antenna for
2.4 GHz band
and 5 GHz band
with a high gain of
23 dBi
Directional
antenna for
5 GHz band with
18 dBi gain
++
Polarizationdiversity antenna
for 2.4 GHz band,
linear
BAT54 family
BAT54BAT54-F
Rail
+++
+++
BAT300 family
OpenBAT family
BAT300BAT300-F BAT-R
BAT-F
Rail
+
+
+
+
+++
+++
++
++
++
++
+++
+++
+
+
+
+
-
-
+++
+++
+++
+++
-
-
+++
+++
+++
+++
+++
+++
++
++
++
++
+++ Very good; ++ Good; + Possible; - Not usable; nr not relevant
12
BAT54 family
BAT54BAT54-F
Rail
+++
+++
BAT300 family
OpenBAT family
BAT300BAT300-F BAT-R
BAT-F
Rail
++
++
++
++
+
+++
+++
+++
+++
+++
+++
+
+++
+++
+++
+++
+++
+++
-
-
-
-
+++
+++
+++
-
-
-
+++
+++
+++
+++
Art.-No Antenna
Description
943 981- BAT-ANT010
N-9A-DSIP65
Polarization++
diversity antenna
for 5 GHz band,
linear
943 981- BAT-ANT001
N-LC-G50m-IP65
Leaky wave
conductor for
2.4 GHz, black,
50m
Leaky wave
conductor for
2.4 GHz, black,
100m
Omnidirectional
dualbandAntenna for
MiMo for 2.4 GHz
band
Sectoral
MiMoantenna for
5 GHz band
943 981- BAT-ANT101
N-LC-G100m-IP65
943 981- BAT-ANT012
NMiMoDB5N-IP65
943 981- BAT-ANT013
N-MiMo59N-IP65
BAT-C
Release 06 03/2014
BAT Antenna Guide BAT
943 903- BAT-ANT373
Protector
m-f
Overvoltage
Protector
+++
+++
+++
+++
+++
+++
+++
943 903- BAT-LAN374
Protector
IP68
Surge Arrestor
LAN/PoE
+++
+++
+++
+++
+++
+++
+++
Table 2:
+++ Very good; ++ Good; + Possible; - Not usable; nr not relevant
BAT Antenna Guide BAT
Release 06 03/2014
BAT54 family
BAT54BAT54-F
Rail
+++
-
BAT300 family
OpenBAT family
BAT300BAT300-F BAT-R
BAT-F
Rail
+++
+++
-
Art.-No Antenna
Description
BAT-C
943 903- BAT360
Pigtail
Adapter cable
(N socket/RPSMA plug)
nr
943 903- BAT-CLB514
2 N m-f
Antenna Cable
+++
N-Plug to N-Jack
2 m (6.56 ft)
+++
+++
+++
+++
+++
+++
943 903- BAT-CLB516
5 N m-f
+++
Antenna Cable
N-Plug to N-Jack
5 m (16.40 ft)
+++
+++
+++
+++
+++
+++
943 903- BAT-CLB515
15 N m-f
Antenna Cable
+++
N-Plug to N-Jack
15 m (49.21 ft)
+++
+++
+++
+++
+++
+++
Table 2:
+++ Very good; ++ Good; + Possible; - Not usable; nr not relevant
13
4
External antennas
This chapter is structured as follows:
 “Legal regulations for operation external antennas” on page 14
 “Omni-Directional Antennas” on page 16
 “Sector Antennas” on page 26
 “Directional Antennas” on page 32
 “Radiating Cable Antennas (Leaky Cable)” on page 42
4.1
Legal regulations for operation
external antennas
You find additional information on approvals, certifications, and selfdeclarations in the Installation user manuals for the devices.
 Before operating the antennas, refer to the “Safety instructions” chapter
in the Installation user manual for your device or devices.
4.1.1
Relevant for use in the USA and in Canada:
FCC compliant antennas
For the operation of the OpenBAT devices in the USA and in Canada—
characteristic value US for country approvals—you require a permit for the
operation of antennas. If the operation of a specific antenna is legal depends
on the frequency band and the WLAN module used. The following tables
provide you an overview of the approved antennas.
The following table applies solely to OpenBAT devices which are labeled as
follows:
Contains Transmitter Module
FCC ID: U99EWLAN1
IC: 4019A-EWLAN1
Antennas operating with this device Permitted band of operation
model:
2.4 GHz band
5.15 GHz ...
5.25 GHz band
BAT-ANT-RSMA-2AGN-R
Yes
Yes
BAT-ANT-N-3AGN-IP67
Yes
Yes
BAT-ANT-N-MiMoDB-5N-IP65
Yes
Yes
BAT-ANT-N-MiMo5-9N-IP65
No
Yes
BAT-ANT-N-8G-DS-IP65
Yes
No
5.725 GHz ...
5.825 GHz band
Yes
Yes
Yes
Yes
No
Antennas not included in this list are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
14
BAT Antenna Guide BAT
Release 06 03/2014
The following table solely applies to #Variable:OpenBAT# devices which are
labeled as follows:
Contains Transmitter Module
FCC ID: U99EWLAN2
IC: 4019A-EWLAN2
Antennas operating with this device Permitted band of operation
model:
2.4 GHz band
5.15 GHz ...
5.25 GHz band
BAT-ANT-RSMA-2AGN-R
Yes
Yes
BAT-ANT-N-3AGN-IP67
Yes
Yes
BAT-ANT-N-MiMoDB-5N-IP65
Yes
Yes
BAT-ANT-N-MiMo5-9N-IP65
No
Yes
BAT-ANT-N-8G-DS-IP65
Yes
No
BAT-ANT-N-MiMo-18N-IP65
No
No
5.725 GHz ...
5.825 GHz band
Yes
Yes
Yes
Yes
No
Yes
Antennas not included in this list are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
4.1.2
Relevant for use in Japan:
The following table applies to OpenBAT variants with the characteristic
value JP (Japan) for country approvals which are labeled as follows:
 "Contains MIC ID: 204-310014"
 "5GHz band: この製品は屋内においてのみ使用可能です "
Antennas for operation with this device:
BAT-ANT-N-3AGN-IP67
BAT-ANT-RSMA-2AGN-R
BAT-ANT-6ABG-IP65
BAT-ANT-N-MiMoDB-5N-IP65
BAT-ANT-N-8G-DS-IP65
BAT-ANT-N-9A-DS-IP65
BAT-ANT-N-6G-IP65
BAT-ANT-N-5A-IP65
BAT-ANT-N-MiMo-9N-IP65
Permissible frequency bands
2.4 GHz band
5 GHz band
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
No
No
Yes
No
Yes
The use of antennas missing in this list is prohibited. The 5 GHz band is
restricted to indoor usage.
BAT Antenna Guide BAT
Release 06 03/2014
15
4.2
Omni-Directional Antennas
4.2.1
Omni-Directional Antenna for 2.4 GHz band
 BAT-ANT-N-6G-IP65
Order Number: 943 981-002
Radiation Pattern
horizontal
vertical
To be placed in the middle of the illuminated area.
Indoor and outdoor use is possible.
Frequency range
Gain
VSWR (voltage standing wave ratio)
Polarization
HPBW (half power bandwidth)
Downtilt
Max. Power
Impedance
Connector
Table 3:
Electrical Specification
Temperature
Radome color
Radome material
Weight
Dimensions
Protection class
Table 4:
16
2400 MHz ... 2500 MHz
6.0 dBi
< 1.8
Linear, vertical
horizontal 360°
0°
25 W
50 Ω
N female
−40 °F ... 176 °F (−40 °C ... +80 °C)
Grey-white
Fiber glass
0.75 lb (340 g)
ø 0.87 in × 9.84 in (ø 22 mm × 250 mm)
IP65
Environmental & Mechanical Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Mounting material
Table 5:
4.2.2
Cable and Accessories
Omnidirectional antenna for 5 GHz band
 BAT-ANT-N-5A-IP65
Order Number: 943 981-003
Radiation Pattern
horizontal 5470 MHz
vertical 5470 MHz
To be placed in the middle of the illuminated area.
Indoor and outdoor use is possible.
Frequency range
Gain
VSWR (voltage standing wave ratio)
Polarization
HPBW (half power bandwidth)
HPBW (half power bandwidth)
Max. Power
Impedance
Connector
Table 6:
Electrical Specification
Temperature
Radome color
Radome material
Weight
Dimensions
Protection class
Table 7:
5150 MHz ... 5875 MHz
5 dBi
1.5
Linear, vertical
horizontal 360°
vertical 25°
6W
50 Ω
N female
−49 °F ... +158 °F (−45 °C ... +70 °C)
Grey-white
Polypropylene
0.66 lb (300 g)
0.63 in. × 6.30 in. (16 mm × 160 mm)
IP65
Environmental & Mechanical Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
17
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Mounting material
Table 8:
4.2.3
Cable and Accessories
Omnidirectional Antenna for 2.4 and 5 GHz band
 BAT-ANT-N-3AGN-IP67
Order number: 942 110-001 (10 pcs.)
The antenna is supplied with all BAT-C devices. When selecting the
characteristic value Z, you have the option of ordering this antenna
together with the accessory kit of the OpenBAT-F device.
mm
inch
Ø 12.9
Ø 0.50
80 ±2
3.15 ±0.08
Ø 12.9
Ø 0.50
Ø 20
Ø 0.79
The antenna is directly screwed on the BAT.
Approved according to FCC for operation in the 2.4 GHz band and the 5
GHz band for indoor and outdoor applications.
Radiation Pattern
horizontal 2400 MHz
18
horizontal 5000 MHz
BAT Antenna Guide BAT
Release 06 03/2014
90
10
120
90
0
30
-20
180
-30
0
-20
180
0
-20
-10
-10
330
210
0
330
210
0
240
10
300
240
10
270
vertical 5000 MHz
90
10
120
90
10
E_Plane
2400
2450
2500
60
0
E_Plane
5150
5250
5350
5450
5550
5650
5750
5850
60
30
150
-10
-20
-20
180
-30
0
-20
-10
120
0
30
150
-10
300
270
vertical 2400 MHz
-30
H_Plane
5150
5250
5350
5450
5550
5650
5750
5850
60
150
-10
-20
-30
120
0
30
150
-10
10
H_Plane
2400
2450
2500
60
180
0
-20
-10
330
210
0
10
330
210
0
240
300
10
240
270
Frequency range
Gain
VSWR (voltage standing wave
ratio)
Polarization
HPBW (half power bandwidth)
HPBW (half power bandwidth)
Max. Power
Impedance
Connector
Table 9:
300
270
2400 MHz ... 2485 MHz
2.0 dBi
≤2.0
Linear, vertical
horizontal 360°
vertical 30°
2W
50 Ω
N-type male
5150 MHz ... 5850 MHz
2.0 dBi
vertical 15°
Electrical Specification
Temperature
Radome color
Radome material
Weight
Dimensions
Protection class
−40 °F ... +185 °F (−40 °C ... +85 °C)
Black
PC
0.08 lb (35 g)
0.79 in. × 3.15 in. (20 mm × 80 mm)
IP65 / IP67
Table 10: Environmental & Mechanical Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
19
 BAT-ANT-RSMA-2AGN-R
Order Number: 942 046-001 (10 pcs.)
Selecting the characteristic value Z, you have the possibility to order this
antenna together with the accessory kit of the BAT-R devices.
159.8 ± 2
90
°
30.2
1.19
Ø 12.5
Ø 0.49
6.29 ± 0.08
mm
inch
21.2
0.83
The antenna is directly screwed on the BAT.
Radiation Pattern
horizontal 2450 MHz
20
vertical 2450 MHz
BAT Antenna Guide BAT
Release 06 03/2014
horizontal 5250 MHz
vertical 5250 MHz
horizontal 5750 MHz
vertical 5750 MHz
Frequency range
Gain
2400 MHz
3 dBi
5250 MHz and 5750 MHz
5 dBi
Table 11: Electrical Specification
BAT Antenna Guide BAT
Release 06 03/2014
21
VSWR (voltage standing wave
ratio)
Polarization
HPBW (half power bandwidth)
HPBW (half power bandwidth)
Impedance
Connector
2.0
Linear, vertical
horizontal 360°
vertical 30°
50 Ω
Reverse-SMA male
vertical 15°
Table 11: Electrical Specification
Temperature
Radome color
Radome material
Weight
Dimensions
−4 °F ... +149 °F (−20 °C ... +65 °C)
Black
PC/PU
0.06 lb (26 g)
0.83 in × 6.3 in (21 mm × 160 mm)
Table 12: Environmental & Mechanical Characteristics
4.2.4
Omni-Directional Dualband Antenna for MiMo
 BAT-ANT-N-MiMoDB-5N-IP65
Order Number: 943 981-012
Radiation Pattern
5 GHz
horizontal
22
vertical
2.4 GHz
horizontal
vertical
BAT Antenna Guide BAT
Release 06 03/2014
To be placed in the middle of the illuminated area.
Indoor and outdoor use is possible.
To be used with BAT300 devices to optimally support the MiMo function.
Frequency range
Gain
VSWR (voltage standing wave ratio)
Polarization
HPBW (half power bandwidth)
Downtilt
Max. Power
Impedance
Connector
2400 MHz ... 2500 MHz
5150 MHz ... 5875 MHz
3.5 dBi / 5.5 dBi
1.8
3 × Linear, vertical
horizontal 360°
0°
2W
50 Ω
3 × N male at 3.28 ft (1 m) cable directly attached
Table 13: Electrical Specification
Temperature
Radome color
Radome material
Weight
Dimensions
Protection class
−40 °F ... 176 °F (−40 °C ... +80 °C)
7035 (Light Gray)
plastic
0.66 lb (300 g)
12.2 in × 4.33 in × 1.57 in (310 mm × 110 mm
× 40 mm)
IP65
Table 14: Environmental & Mechanical Characteristics
3 × 3 ft (90 cm) directly mounted to the antenna with N male connectors
3 × Pigtail, R-SMA male to N female
Mounting material
Table 15: Cable and Accessories
BAT Antenna Guide BAT
Release 06 03/2014
23
4.2.5
Dual band Hemispherical Antenna for 2.4 and 5 GHz
band
 BAT-ANT-N-6ABG-IP65
Order Number: 943 981-004
Radiation Pattern
horizontal
vertical
17.7
0.7
mm
inch
Ø 4.5
8
Ø 0.1
70
2.7
6
Ø 43.92
Ø 1.73
Ø 86
Ø 3.39
42.89
1.69
To be placed on moving parts, vehicles or boxes.
Frequency range
Impedance
VSWR (voltage standing wave ratio)
Polarization
2300 MHz ... 2500 MHz
4900 MHz ... 5935 MHz
50 Ω
1.8
Linear, vertical
Table 16: Electrical Specification
24
BAT Antenna Guide BAT
Release 06 03/2014
Gain
3 dB beamwidth horizontal
3 dB beamwidth horizontal
Max. Power
6 dBi at 2.4 GHz
8 dBi at 5 GHz
at 2.4 GHz 360°
at 5 GHz 173°
75 W (CW) at 77 °F (25 °C)
Table 16: Electrical Specification
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Table 17: Cable and Accessories
BAT Antenna Guide BAT
Release 06 03/2014
25
4.3
Sector Antennas
4.3.1
Directional antenna for 2.4 GHz band with 14 dBi gain
 BAT-ANT-N-8G-DS-IP65
Order Number: 943 981-009
Radiation Pattern
horizontal
vertical
81
3.19
26.1
1.03
100
3.94
35
1.38
mm
inch
Suitable for use with BAT300 and for polarization diversity with BAT54.
Frequency range
Impedance
VSWR (voltage standing wave ratio)
Polarization
Gain
3 dB beamwidth horizontal
3 dB beamwidth vertical
Downtilt
2400 MHz ... 2485 MHz
50 Ω
1.5
dual linear, ± 45° slant
8 dBi
75°
70°
0°
Table 18: Electrical Specification
26
BAT Antenna Guide BAT
Release 06 03/2014
Isolation between ports
Front to back ratio
Max. Power
Connector
25 dB
14 dB
10 W (CW) at 77 °F (25 °C)
2 × N female
Table 18: Electrical Specification
Dimensions
Weight
Radome material
Radome color
Operating temperature range
Storage temperature range
Windload
Protection class
3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm
× 35 mm)
0.24 lb (0.11 kg)
LEXAN EXL 9330
RAL 7044 (silk gray)
−40 °F ... 176 °F (−40 °C ... +80 °C)
−40 °F ... 176 °F (−40 °C ... +80 °C)
3.37 lbf at 99 m/h (15 N at 160 km/h)
IP65
Table 19: Mechanical Properties
2 × 3.28 ft (1 m) with N male connectors at both ends
2 × Pigtail, R-SMA male to N female
Mounting material
Table 20: Cable and Accessories
BAT Antenna Guide BAT
Release 06 03/2014
27
4.3.2
Polarization-diversity antenna for 5 GHz band, linear
 BAT-ANT-N-9A-DS-IP65
Order Number: 943 981-010
Radiation Pattern
horizontal
vertical
81
3.19
26.1
1.03
100
3.94
35
1.38
mm
inch
Frequency range
Impedance
VSWR (voltage standing wave ratio)
Polarization
Gain
3 dB beamwidth horizontal
3 dB beamwidth vertical
Downtilt
Isolation between ports
Front to back ratio
Max. Power
Connector
5150 MHz ... 5925 MHz
50 Ω
2
dual linear, ± 45° slant
9 dBi
70°
60°
0°
20 dB
20 dB
10 W (CW) at 77 °F (25 °C)
2 × N female
Table 21: Electrical Specification
28
BAT Antenna Guide BAT
Release 06 03/2014
Dimensions
Weight
Housing material
Radome material
Radome material
Radome color
Operating temperature range
Storage temperature range
Windload
Protection class
3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm
× 35 mm)
0.24 lb (0.11 kg)
ASA and aluminum
ASA
LEXAN EXL 9330
RAL 7044 (silk gray)
−40 °F ... 176 °F (−40 °C ... +80 °C)
−40 °F ... 176 °F (−40 °C ... +80 °C)
3.37 lbf at 99 m/h (15 N at 160 km/h)
IP65
Table 22: Mechanical Properties
2 × 3.28 ft (1 m) with N male connectors at both ends
2 × Pigtail, R-SMA male to N female
Mounting material
Table 23: Cable and Accessories
BAT Antenna Guide BAT
Release 06 03/2014
29
4.3.3
Sectoral MiMoantenna for 5 GHz band
 BAT-ANT-N-MiMo5-9N-IP65
Order Number: 943 981-013
Radiation Pattern
horizontal – Anschluss 1
vertikal – Anschluss 1
horizontal – connection 2
vertical – connection 2
horizontal – connection 3
vertical – connection 3
This antenna is intended for applications operating at 5 GHz. The antenna
is designed to be placed on flat surfaces or other edges in both indoor or
outdoor applications. The antenna is also useful for medium range point
to point applications.
30
BAT Antenna Guide BAT
Release 06 03/2014
To be used with BAT300 and OpenBAT devices to optimally support the
MiMo function.
Frequency range
Impedance
VSWR (voltage standing wave ratio)
Polarization
Gain
3 dB beamwidth horizontal
3 dB beamwidth vertical
Downtilt
Max. Power
Connector
5150 MHz ... 5875 MHz
50 Ω
1.5
3 × linear vertical / horizontal / +45°
9 dBi
65°
65°
0°
2 W (CW) at 77 °F (25 °C)
N female
Table 24: Electrical Specification
Dimensions
Weight
Radome material
Radome color
Operating temperature range
Storage temperature range
Windload
Protection class
3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm
× 35 mm)
0.24 lb (0.11 kg)
LEXAN EXL 9330
RAL 7044 (silk gray)
−40 °F ... 176 °F (−40 °C ... +80 °C)
−40 °F ... 176 °F (−40 °C ... +80 °C)
3.37 lbf at 99 m/h (15 N at 160 km/h)
IP65
Table 25: Mechanical Properties
3 × 3.28 ft (1 m) with N male connectors at both ends
3 × Pigtail, R-SMA male to N female
Mounting material
Table 26: Cable and Accessories
BAT Antenna Guide BAT
Release 06 03/2014
31
4.4
Directional Antennas
4.4.1
Directional antenna for 2.4 GHz band with 14 dBi gain
 BAT-ANT-N-14G-IP23
Order Number: 943 981-005
Radiation Pattern
horizontal
32
vertical
BAT Antenna Guide BAT
Release 06 03/2014
4.3
0.17
200
7.87
252.99
9.96
40
1.57
200
7.87
222.01
8.74
mm
inch
1:5
52.45
2.06
Frequency range
Impedance
VSWR (voltage standing wave ratio)
Polarization
Gain
3 dB beamwidth horizontal
3 dB beamwidth vertical
Downtilt
Front to back ratio
Max. Power
Connector
2300 MHz ... 2500 MHz
50 Ω
1.5
vertical
14 dBi
35°
30°
0°
20 dB
75 W (CW) at 77 °F (25 °C)
N female
Table 27: Electrical Specification
BAT Antenna Guide BAT
Release 06 03/2014
33
Dimensions
Weight
Radome material
Radome color
Operating temperature range
Storage temperature range
Windload
Protection class
3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm
× 35 mm)
0.24 lb (0.11 kg)
LEXAN EXL 9330
RAL 7044 (silk gray)
−40 °F ... 176 °F (−40 °C ... +80 °C)
−40 °F ... 176 °F (−40 °C ... +80 °C)
3.37 lbf at 99 m/h (15 N at 160 km/h)
IP23
Table 28: Mechanical Properties
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Mounting material
Table 29: Cable and Accessories
34
BAT Antenna Guide BAT
Release 06 03/2014
4.4.2
Directional antenna for 5 GHz band with 18 dBi gain
 BAT-ANT-N-18A-V-IP65
Order Number: 943 981-006
Radiation Pattern
horizontal
vertical
This antenna is intended for applications operating at 5 GHz over medium
distances (see “Antenna Selection Criteria” on page 9).
Indoor and outdoor use is possible.
When used with BAT300 or OpenBAT devices: Due to the compact
design, several of these antennas can be mounted on a single post. For
better separation of the spatial streams with MiMo, you mount the
antennas with different alignments (polarizations).
Example:
1st antenna: vertical
2nd antenna: horizontal
3rd antenna: 45° horizontal
Frequency range
Gain
Polarization
HPBW / horizontal
HPBW / vertical
Front to back ratio
Power handling
Impedance
Connector
5150 MHz ... 5250 MHz
5250 MHz ... 5350 MHz
5350 MHz ... 5725 MHz
5725 MHz ... 5875 MHz
18 dBi
19 dBi
18.5 dBi
18 dBi
Linear, vertical
18°
18°
> 30 dB
6 W (CW)
50 Ω
N Jack
Table 30: Electrical Specification
BAT Antenna Guide BAT
Release 06 03/2014
35
Windload @ wind speed
Temperature
Radome material
Radome color
Weight
Dimensions
23.4 lbf at 64 m/h (104 N at 216 km/h)
−49 °F ... +158 °F (−45 °C ... +70 °C)
plastic
7035 (Light Gray)
0.11 kg, 0.24 lb
7.48 in × 7.48 in × 1.2 in (190 mm × 190 mm
× 30.5 mm)
IP65 / IP67
Protection class
Table 31: Environmental & Mechanical Characteristics
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Mounting material
Table 32: Cable and Accessories
 BAT-ANT-N-23A-V-IP65
Order Number: 943 981-007
Radiation Pattern
horizontal
vertical
This antenna is intended for applications operating at 5 GHz over long
distances (see “Antenna Selection Criteria” on page 9).
Only recommended for BAT54 devices.
Relevant for North America:
Operate the antennas BAT-ANT-N-23A-V-IP65 and BAT-ANT-N-23AVH-IP65 exclusively in point-to-point connections.
Frequency range
Gain
VSWR (voltage standing wave ratio)
Polarization
5150 MHz ... 5350 MHz
5470 MHz ... 5875 MHz
23 dBi
< 1.5
Linear, vertical
Table 33: Electrical Specification
36
BAT Antenna Guide BAT
Release 06 03/2014
HPBW / horizontal
HPBW / vertical
Front to back ratio
Max. Power
Impedance
Connector
9°
9°
> 30 dB
6W
50 Ω
N Jack
Table 33: Electrical Specification
Windload @ wind speed
Temperature
Radome material
Radome color
Weight
Dimensions
Protection class
59.3 lbf at 136 m/h (264N at 220 km/h)
−49 °F ... +158 °F (−45 °C ... +70 °C)
plastic
Grey-white
3.31 lb (1.5 kg)
12.01 in × 12.01 in × 0.98 in (305 mm × 305 mm
× 25 mm)
IP65 / IP67
Table 34: Environmental & Mechanical Characteristics
3.28 ft (1 m ) with N male connectors at both ends.
Pigtail, R-SMA male to N female
Mounting material for wall and mast mount
Table 35: Cable and Accessories
4.4.3
Directional antenna for 2.4 GHz band and 5 GHz band
with 23 dBi gain
 BAT-ANT-N-23A-VH-IP65
Order Number: 943 981-008
Radiation Pattern
port horizontal / plane horizontal port vertical / plane horizontal
BAT Antenna Guide BAT
Release 06 03/2014
37
port horizontal / plane vertical
port vertical / plane vertical
This antenna is intended for applications operating at 5 GHz over long
distances (see “Antenna Selection Criteria” on page 9).
Recommended for BAT300 and OpenBAT devices.
Indoor and outdoor use is possible.
MiMo is achieved via polarization diversity.
Frequency range
Gain
VSWR (voltage standing wave ratio)
Polarization
HPBW / horizontal
HPBW / vertical
Front to back ratio
Max. Power
Impedance
Connector
5150 MHz ... 5875 MHz
23 dBi
< 1.7
dual Linear, vertical and horizontal
9°
9°
−30 dB
6W
50 Ω
2 × N female
Table 36: Electrical Specification
Windload @ survival speed
Temperature
Radome material
59.3 lbf at 136 m/h (264N at 220 km/h)
−49 °F ... +158 °F (−45 °C ... +70 °C)
plastic
Table 37: Environmental & Mechanical Characteristics
38
BAT Antenna Guide BAT
Release 06 03/2014
Radome color
Weight
Dimensions
Protection class
Grey-white
5.5 lb (2.5 kg,)
14.61 in. × 14.61 in. × 1.57 in. (371 mm × 371 mm
× 40 mm)
IP65 / IP67
Table 37: Environmental & Mechanical Characteristics
2 × 3.28 ft (1 m) with N male connectors at both ends
2 × Pigtail, R-SMA male to N female
Mounting material for wall and mast mount
Table 38: Cable and Accessories
4.4.4
Directional antenna for 5 GHz band with 18 dBi gain
 BAT-ANT-N-MiMo-18N-IP65
Order Number: 943 981-014
BAT Antenna Guide BAT
Release 06 03/2014
39
mm
14
0.55
66
2.60
inch
305
12.0
60.9
2.36
+45°
60.9
2.36
15.5
0.59
72.8
2.83
–45°
63.3
2.48
Radiation Pattern
5 GHz
horizontal - connection on the right (+45°)
vertical - connection on the right (+45°)
Radiation Pattern
Amplitude [dB]
Azimuth [deg]
Radiation Pattern
Amplitude [dB]
-90
-120
90
-60
-150
120
-30
180
-20
-10
-6
-3
150
0
150
0
30
180
30
120
-20
-120
0
0
-60
Vertical-Plane: Copolar
horizontal - connection on the left (–45°)
vertical - connection on the left (–45°)
Radiation Pattern
Radiation Pattern
Amplitude [dB]
-90
-120
-60
-150
-20
-10
-6
-3
0
30
120
60
150
0
30
180
-20
-10
-6
-3
-150
60
90
90
120
-30
150
40
-3
-90
Elevation [deg]
Horizontal-Plane: Copolar
Horizontal-Plane: Copolar
-6
-30
60
180
-10
-150
90
Amplitude [dB]
Azimuth [deg]
60
0
0
-30
-120
Elevation [deg]
-60
-90
Vertical-Plane: Copolar
BAT Antenna Guide BAT
Release 06 03/2014
horizontal - vertical connection
vertical - vertical connection
Horizontal-Plane: Copolar
Radiation Pattern
Amplitude [dB]
Azimuth [deg]
Radiation Pattern
-90
-120
Amplitude [dB]
-60
90
120
-150
60
-30
150
180
-20
-10
-6
-3
150
0
0
30
120
30
180
Horizontal-Plane: Copolar
-10
-6
-3
-150
60
90
-20
0
0
-30
-120
Elevation [deg]
-60
-90
Vertical-Plane: Copolar
This antenna is intended for applications operating at 5 GHz over long
distances (see “Antenna Selection Criteria” on page 9).
Recommended for BAT300-Rail-, BAT300-F and OpenBAT devices.
MiMo is achieved via polarization diversity.
Relevant for North America:
See “Legal regulations for operation external antennas” on page 14.
Band 1
Band 2
Frequency range 4900 MHz ... 5150 MHz 5150 MHz ... 6000 MHz
VSWR (voltage
1.8
1.8
standing wave
ratio)
Gain
17 dBi
18 dBi
HPBW / vertical
20°
Band 3
6000 MHz ... 6100 MHz
1.8
16 dBi
15°
Table 39: Electrical Specification
Polarization
Max. Power
Impedance
Connector
0°, +/−45° inclination
6W
50 Ω
N Jack
Table 40: General data
Windload @ survival speed
Temperature
Radome material
Radome color
Weight
263 N at 136 m/h (263 N at 220 km/h)
−49 °F ... +158 °F (−45 °C ... +70 °C)
plastic
Grey-white
3.31 lb (1.5 kg)
Table 41: Environmental & Mechanical Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
41
Dimensions
12.01 in × 12.01 in × 0.59 in (305 mm × 305 mm
× 15 mm)
IP67
Protection class
Table 41: Environmental & Mechanical Characteristics
3 × 3.28 ft (1 m) with N male connectors at both ends
3 × Pigtail, R-SMA male to N female
Mounting material for wall and mast mount
Table 42: Cable and Accessories
4.5
Radiating Cable Antennas (Leaky Cable)
4.5.1
Leaky Cable for 2.4 GHz; black
Radiating cables are coaxial cables that are equipped with small slots in their
shields at regular intervals that operate as antennas. This leads to a
homogeneous field around the cable.
Indoor and outdoor use is possible.
100 m; 328 ft
50 m; 164 ft
The 100 m (328 ft) cable is designed to be fed by 2 access points, each
feeding the cable for approximately 50 m (164 ft). The 50 m (164 ft) cable is
designed to be used with one Access Point and equipped with a terminator
at the end.
 BAT-ANT-N-LC-G-50m-IP65
Order Number: 943 981-001
Cable length
Cable specification
164 ft (50 m)
2 × N male connectors; 0.15 dB at 2.4 GHz
Table 43: Specification
42
BAT Antenna Guide BAT
Release 06 03/2014
Frequency band
Antenna connector
2000 MHz - 2900 MHz
N-type male
Table 44: Radio technology
Operating temperature
Storage/transport temperature
Dimensions
Protection class
Weight
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
–40 ºF ... +185 ºF (–70 ºC ... +85 ºC)
164 ft (50 m); d = 0.6 in (15 mm)
IP65
26.5 lb (12 kg)
Table 45: Ambient conditions
Halogen free and flame retardant outer sheath
Low corrosive gas emission according to IEC 60754-2
Flame retardant according to IEC 60332-1 and IEC 60332-3 cat. C
Low smoke emission according to IEC 61034
Table 46: Flammability Characteristics
Leaky Cable
2 × N-connector, preassembled
1 × terminating resistor 50 Ohm
50 × fastening clip
Table 47: Scope of delivery and accessories
BAT Antenna Guide BAT
Release 06 03/2014
43
 BAT-ANT-N-LC-G-100m-IP65
Order Number: 943 981-101
Cable length
Cable specification
100 m, 328 ft
2 × N male connectors; 0.15 dB at 2.4 GHz
Table 48: Specification
Frequency band
Antenna connector
2000 MHz - 2900 MHz
N-type male
Table 49: Radio technology
Operating temperature
Storage/transport temperature
Dimensions
Protection class
Weight
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
–40 ºF ... +185 ºF (–70 ºC ... +85 ºC)
328 ft (100 m); d = 0.6 in (15 mm)
IP65
53 lb (24 kg)
Table 50: Ambient conditions
Halogen free and flame retardant outer sheath
Low corrosive gas emission according to IEC 60754-2
Flame retardant according to IEC 60332-1 and IEC 60332-3 cat. C
Low smoke emission according to IEC 61034
Table 51: Flammability Characteristics
Leaky Cable
2 × N-connector, preassembled
1 × terminating resistor 50 Ohm
100 × fastening clip
Table 52: Scope of delivery and accessories
Configurations Longitudinal Attenuation
db/328 ft (dB/100 m)
LC at 4 in (10 cm) from a concrete floor
15
LC at 0.6 in (15 mm) from a metal surface 17
LC directly against a metal surface
34
Table 53: Longitudinal attenuation of both cables between 2.4 and 2.485 GHz
44
BAT Antenna Guide BAT
Release 06 03/2014
Figure 1: Mounting a leaky wave conductor in the tunnel. Fastening clips are
included in the delivery.
BAT Antenna Guide BAT
Release 06 03/2014
45
5
Cables/Adapter
Available as accessories.
Note: All antennas are supplied with 1 m, 3.28 ft cable N m-m and Pigtail.
 BAT-CLB-2 N m-f, BAT-CLB-2 N f-f
Order Number:
m-m: 943 903-513
m-f: 943 903-514
Length
Attenuation
Connector
Protection class
6.56 ft (2 m)
1.4 dB / 2.4 GHz
3 dB / 5 GHz
N male to female
IP65
Table 54: Characteristics
Temperature range
Installation temperature range
Flammability
Halogen-free
2002/95/EC (RoHS) compliant
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
–4 ºF ... +140 ºF (−20 °C ... +60 °C)
UL 1581 § 1080 (VW-1)
in compliance with IEC 60754
Table 55: Flammability Characteristics
46
BAT Antenna Guide BAT
Release 06 03/2014
 BAT-CLB-5 N m-f
Order Number: 943 903-516
Length
Attenuation
Connector
16.4 ft (5 m)
1.3 dB / 2.4 GHz
2.3 dB / 5 GHz
N male/ N female
Table 56: Characteristics
Temperature range
Installation temperature range
Flammability
Halogen-free
2002/95/EC (RoHS) compliant
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
–4 ºF ... +140 ºF (−20 °C ... +60 °C)
UL 1581 § 1080 (VW-1)
in compliance with IEC 60754
Table 57: Flammability Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
47
 BAT-CLB-15 N m-f
Order Number: 943 903-515
Low loss cable
Length
Attenuation
Connector
16.4 ft (5 m)
3 dB / 2.4 GHz
4 dB / 5 GHz
N male/ N female
Table 58: Characteristics
Temperature range
Installation temperature range
Flammability
Halogen-free
2002/95/EC (RoHS) compliant
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
–4 ºF ... +140 ºF (−20 °C ... +60 °C)
UL 1581 § 1080 (VW-1)
in compliance with IEC 60754
Table 59: Flammability Characteristics
48
BAT Antenna Guide BAT
Release 06 03/2014
 BAT-Pigtail
Order Number: 943 903-360
This article is included in the antenna sets.
Length
Attenuation
Connector
0.66 ft (0.2 m)
0.5 dB / 2.4 GHz
1 dB / 5 GHz
N female/ RPSMA-Plug
Table 60: Characteristics
BAT Antenna Guide BAT
Release 06 03/2014
49
 BAT-ANT-Protector m-f
Order Number: 943 903-373
Main path connectors
Mounting and grounding
Side of bulkhead
Design specialty
Connection 1: N socket, protected (electrically
isolated)
Connection 2: N socket, unprotected
MH170/brk (MH=bulkhead mounting/brk=bracket)
protected side
inline design
Table 61: Product Configuration
Impedance
Frequency range
Return loss
Insertion loss
RF CW power
Surge current handling capability
Residual pulse energy
50 Ω
2000 MHz ... 6000 MHz
>= 20 dB
<= 0.2 dB
<= 300 W
50 multiple kA (test pulse 8/20 μs)
0.0001 μJ typically (test pulse 4 kV 1.2/50 μs / 2 kA
8/20 μs) Main path - protected side
Table 62: Electrical Specification
Weight
Operating temperature
Waterproof degree
2002/95/EC (RoHS)
0.19 lb (0.085 kg)
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
IP65 (according to IEC 60529, data refers to the
coupled state)
compliant
Table 63: Environmental & Mechanical Characteristics
This BAT-ANT-Protector m-f is additionally equipped with a capacitor that
also helps avoid damage of electrical static discharge.
This device is strongly recommended to be used in- and outdoor
wherever electrical discharge, overvoltage or unclear grounding occur.
Please refer to the Outdoor Installation Guide for how to mount and plan
the installation.
50
BAT Antenna Guide BAT
Release 06 03/2014
 BAT-LAN-Protector IP68
Order Number: 943 903-374
Overvoltage protector for the PoE/LAN cable.
IP68 shielded.
Cable not included.
Main path connectors
Mounting
Grounding
RJ45 jack (female) – RJ45 jack (unprotected side –
protected side)
via mounting bracket
via mounting bracket or grounding M6 screw (ring of cable
shoe > 0.26 in (6.5 mm))
Table 64: Product Configuration
Data transmission
rate
Frequency range
Impedance
Voltage rating
Current rating
Response Time
Current handling
capability
Protection level
Clamping voltage
1000 Mbit/s
DC to 100 MHz
100 Ω
per pair
per pair
2 ns
wire - wire
wire - ground
shield – ground
wire - wire
wire - ground
shield – ground
wire - wire
wire - ground
shield – ground
±6 V
1.5 A max.
0.1 kA (test pulse 8/20 µs)
2.5 kA (test pulse 8/20 µs)
6 kA (test pulse 8/20 µs)
20 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)
700 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)
700 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)
15 V
90 V
90 V
Table 65: Electrical Specification
Cable category
Operating temperature
Protection class
Weight
according to ISO/IEC 11801:2002 class D specified (up to
CAT-5e system)
–40 ºF ... +185 ºF (−40 ºC ... +85 ºC)
IP68
0.73 lb (0.33 kg)
Table 66: Environmental & Mechanical Characteristics
Please refer to the Outdoor Installation Guide for how to mount and plan
the installation.
BAT Antenna Guide BAT
Release 06 03/2014
51
6
Planning the network
With the free BAT Planner, you can quickly and surely prepare a rough plan
for your industry-compatible network, without needing sound knowledge of
WLAN. Quickly and easily you will obtain the material list of the components,
consisting of access points, antennas, cables and lightening protector, that
you will require for your solution. The planning and the material list are
created in the form of an overview, which can form the basis of the planning
for your WLAN project. This gives you an easy and assured start to a project,
and you can complete the next steps together with Hirschmann™ or a
Hirschmann partner.The BAT Planner supports the planning of infrastructure
networks and fixed installations (P2P lines, bridge links, WDS, mesh
networks).
You can obtain your free BAT Planner and other information on the Internet
under http://www.hirschmann.com.
52
BAT Antenna Guide BAT
Release 06 03/2014
A
Explanation of passive
antennas in explosive hazard
areas
Hirschmann BAT antennas are passive devices which are not able to
increase the power by themselves.
Devices which are specified in accordance with the ATEX directive
complying with the technical standards EN 60079-0 and EN 60079-15 can
be operated with all associated Hirschmann BAT antennas. You recognize
the specified devices by their device label.
With the use of the prescribed device configuration, the 2 Watts maximum
power permitted for the ATEX equipment group IIC is not reached in the
following bands:
 2.4 GHz ... 2.4835 GHz
 5.15 GHz ... 5.35 GHz
 5.47 GHz ... 5.725 GHz
BAT Antenna Guide BAT
Release 06 03/2014
53
Index
B
Index
A
ATEX zone II
F
FAQ
R
Radiating cable
T
Technical Questions
Training Courses
54
53
55
42
55
55
BAT Antenna Guide BAT
Release 06 03/2014
C
Further Support
 Technical Questions
For technical questions, please contact any Hirschmann dealer in your
area or Hirschmann directly.
You will find the addresses of our partners on the Internet at
http://www.hirschmann.com
Contact our support at
https://hirschmann-support.belden.eu.com
You can contact us
in the EMEA region at
 Tel.: +49 (0)1805 14-1538
 E-mail: [email protected]
in the America region at
 Tel.: +1 (717) 217-2270
 E-mail: [email protected]
in the Asia-Pacific region at
 Tel.: +65 6854 9860
 E-mail: [email protected]
 Hirschmann Competence Center
The Hirschmann Competence Center is ahead of its competitors:
 Consulting incorporates comprehensive technical advice, from system
evaluation through network planning to project planning.
 Training offers you an introduction to the basics, product briefing and
user training with certification.
The current technology and product training courses can be found at
http://www.hicomcenter.com
 Support ranges from the first installation through the standby service
to maintenance concepts.
With the Hirschmann Competence Center, you have decided against
making any compromises. Our client-customized package leaves you
free to choose the service components you want to use.
Internet:
http://www.hicomcenter.com
BAT Antenna Guide BAT
Release 06 03/2014
55
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement